forked from Minki/linux
ath5k:Remove __raw_read and __raw_write
By swithing from our __raw_read and __raw_write functions to ioread32 and iowrite32, benchmarks on my desk with iperf went from 11MBps to 18.1MBps using the AHB bus on an EnGenius ECB3500 running OpenWRT. Signed-off-by: Jonathan Bither <jonbither@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
parent
8860020e0b
commit
cede8b6480
@ -140,23 +140,23 @@ static int ath_ahb_probe(struct platform_device *pdev)
|
||||
|
||||
if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
|
||||
/* Enable WMAC AHB arbitration */
|
||||
reg = __raw_readl((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
|
||||
reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
|
||||
reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN;
|
||||
__raw_writel(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
|
||||
iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
|
||||
|
||||
/* Enable global WMAC swapping */
|
||||
reg = __raw_readl((void __iomem *) AR5K_AR2315_BYTESWAP);
|
||||
reg = ioread32((void __iomem *) AR5K_AR2315_BYTESWAP);
|
||||
reg |= AR5K_AR2315_BYTESWAP_WMAC;
|
||||
__raw_writel(reg, (void __iomem *) AR5K_AR2315_BYTESWAP);
|
||||
iowrite32(reg, (void __iomem *) AR5K_AR2315_BYTESWAP);
|
||||
} else {
|
||||
/* Enable WMAC DMA access (assuming 5312 or 231x*/
|
||||
/* TODO: check other platforms */
|
||||
reg = __raw_readl((void __iomem *) AR5K_AR5312_ENABLE);
|
||||
reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
|
||||
if (to_platform_device(ah->dev)->id == 0)
|
||||
reg |= AR5K_AR5312_ENABLE_WLAN0;
|
||||
else
|
||||
reg |= AR5K_AR5312_ENABLE_WLAN1;
|
||||
__raw_writel(reg, (void __iomem *) AR5K_AR5312_ENABLE);
|
||||
iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
|
||||
|
||||
/*
|
||||
* On a dual-band AR5312, the multiband radio is only
|
||||
@ -203,17 +203,17 @@ static int ath_ahb_remove(struct platform_device *pdev)
|
||||
|
||||
if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
|
||||
/* Disable WMAC AHB arbitration */
|
||||
reg = __raw_readl((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
|
||||
reg = ioread32((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
|
||||
reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN;
|
||||
__raw_writel(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
|
||||
iowrite32(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
|
||||
} else {
|
||||
/*Stop DMA access */
|
||||
reg = __raw_readl((void __iomem *) AR5K_AR5312_ENABLE);
|
||||
reg = ioread32((void __iomem *) AR5K_AR5312_ENABLE);
|
||||
if (to_platform_device(ah->dev)->id == 0)
|
||||
reg &= ~AR5K_AR5312_ENABLE_WLAN0;
|
||||
else
|
||||
reg &= ~AR5K_AR5312_ENABLE_WLAN1;
|
||||
__raw_writel(reg, (void __iomem *) AR5K_AR5312_ENABLE);
|
||||
iowrite32(reg, (void __iomem *) AR5K_AR5312_ENABLE);
|
||||
}
|
||||
|
||||
ath5k_deinit_ah(ah);
|
||||
|
@ -1656,12 +1656,12 @@ static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
|
||||
|
||||
static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
|
||||
{
|
||||
return __raw_readl(ath5k_ahb_reg(ah, reg));
|
||||
return ioread32(ath5k_ahb_reg(ah, reg));
|
||||
}
|
||||
|
||||
static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
|
||||
{
|
||||
__raw_writel(val, ath5k_ahb_reg(ah, reg));
|
||||
iowrite32(val, ath5k_ahb_reg(ah, reg));
|
||||
}
|
||||
|
||||
#else
|
||||
|
@ -473,14 +473,14 @@ ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags)
|
||||
}
|
||||
|
||||
/* Put BB/MAC into reset */
|
||||
regval = __raw_readl(reg);
|
||||
__raw_writel(regval | val, reg);
|
||||
regval = __raw_readl(reg);
|
||||
regval = ioread32(reg);
|
||||
iowrite32(regval | val, reg);
|
||||
regval = ioread32(reg);
|
||||
usleep_range(100, 150);
|
||||
|
||||
/* Bring BB/MAC out of reset */
|
||||
__raw_writel(regval & ~val, reg);
|
||||
regval = __raw_readl(reg);
|
||||
iowrite32(regval & ~val, reg);
|
||||
regval = ioread32(reg);
|
||||
|
||||
/*
|
||||
* Reset configuration register (for hw byte-swap). Note that this
|
||||
|
Loading…
Reference in New Issue
Block a user