forked from Minki/linux
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller
Extend aquacomputer_d5next driver to expose hardware temperature sensors and fans of the Aquacomputer Quadro fan controller, which communicates through a proprietary USB HID protocol. Implemented by Jack Doan [1]. Four temperature sensors and PWM controllable fans are available. The liquid flow sensor is also exposed, implemented by Leonard Anderweit [2]. Additionally, serial number, firmware version and power-on count are exposed through debugfs. This driver has been tested on x86_64. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/5 [2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/9 Originally-from: Jack Doan <me@jackdoan.com> Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20220727100606.9328-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Aleksa Savic
Guenter Roeck
parent
41cd437327
commit
cdbe34da01
@ -9,6 +9,7 @@ Supported devices:
|
||||
* Aquacomputer Farbwerk RGB controller
|
||||
* Aquacomputer Farbwerk 360 RGB controller
|
||||
* Aquacomputer Octo fan controller
|
||||
* Aquacomputer Quadro fan controller
|
||||
|
||||
Author: Aleksa Savic
|
||||
|
||||
@ -33,6 +34,9 @@ better suited for userspace tools.
|
||||
The Octo exposes four temperature sensors and eight PWM controllable fans, along
|
||||
with their speed (in RPM), power, voltage and current.
|
||||
|
||||
The Quadro exposes four temperature sensors, a flow sensor and four PWM controllable
|
||||
fans, along with their speed (in RPM), power, voltage and current.
|
||||
|
||||
The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
|
||||
not all sysfs and debugfs entries will be available.
|
||||
|
||||
@ -45,13 +49,14 @@ the kernel and supports hotswapping.
|
||||
Sysfs entries
|
||||
-------------
|
||||
|
||||
================ =============================================
|
||||
================ ==============================================
|
||||
temp[1-4]_input Temperature sensors (in millidegrees Celsius)
|
||||
fan[1-2]_input Pump/fan speed (in RPM)
|
||||
power[1-2]_input Pump/fan power (in micro Watts)
|
||||
in[0-2]_input Pump/fan voltage (in milli Volts)
|
||||
curr[1-2]_input Pump/fan current (in milli Amperes)
|
||||
================ =============================================
|
||||
fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
|
||||
power[1-8]_input Pump/fan power (in micro Watts)
|
||||
in[0-7]_input Pump/fan voltage (in milli Volts)
|
||||
curr[1-8]_input Pump/fan current (in milli Amperes)
|
||||
pwm[1-8] Fan PWM (0 - 255)
|
||||
================ ==============================================
|
||||
|
||||
Debugfs entries
|
||||
---------------
|
||||
|
||||
@ -257,13 +257,13 @@ config SENSORS_AHT10
|
||||
will be called aht10.
|
||||
|
||||
config SENSORS_AQUACOMPUTER_D5NEXT
|
||||
tristate "Aquacomputer D5 Next, Octo, Farbwerk, and Farbwerk 360"
|
||||
tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, and Farbwerk 360"
|
||||
depends on USB_HID
|
||||
select CRC16
|
||||
help
|
||||
If you say yes here you get support for sensors and fans of
|
||||
the Aquacomputer D5 Next watercooling pump, Octo fan
|
||||
controller, Farbwerk and Farbwerk 360 RGB controllers, where
|
||||
the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan
|
||||
controllers, Farbwerk and Farbwerk 360 RGB controllers, where
|
||||
available.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
|
||||
@ -1,6 +1,7 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo)
|
||||
* hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo,
|
||||
* Quadro)
|
||||
*
|
||||
* Aquacomputer devices send HID reports (with ID 0x01) every second to report
|
||||
* sensor values.
|
||||
@ -21,17 +22,19 @@
|
||||
|
||||
#define USB_VENDOR_ID_AQUACOMPUTER 0x0c70
|
||||
#define USB_PRODUCT_ID_FARBWERK 0xf00a
|
||||
#define USB_PRODUCT_ID_QUADRO 0xf00d
|
||||
#define USB_PRODUCT_ID_D5NEXT 0xf00e
|
||||
#define USB_PRODUCT_ID_FARBWERK360 0xf010
|
||||
#define USB_PRODUCT_ID_OCTO 0xf011
|
||||
|
||||
enum kinds { d5next, farbwerk, farbwerk360, octo };
|
||||
enum kinds { d5next, farbwerk, farbwerk360, octo, quadro };
|
||||
|
||||
static const char *const aqc_device_names[] = {
|
||||
[d5next] = "d5next",
|
||||
[farbwerk] = "farbwerk",
|
||||
[farbwerk360] = "farbwerk360",
|
||||
[octo] = "octo"
|
||||
[octo] = "octo",
|
||||
[quadro] = "quadro"
|
||||
};
|
||||
|
||||
#define DRIVER_NAME "aquacomputer_d5next"
|
||||
@ -97,6 +100,18 @@ static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB
|
||||
/* Fan speed registers in Octo control report (from 0-100%) */
|
||||
static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0x259, 0x2AE };
|
||||
|
||||
/* Register offsets for the Quadro fan controller */
|
||||
#define QUADRO_POWER_CYCLES 0x18
|
||||
#define QUADRO_NUM_FANS 4
|
||||
#define QUADRO_NUM_SENSORS 4
|
||||
#define QUADRO_SENSOR_START 0x34
|
||||
#define QUADRO_CTRL_REPORT_SIZE 0x3c1
|
||||
#define QUADRO_FLOW_SENSOR_OFFSET 0x6e
|
||||
static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };
|
||||
|
||||
/* Fan speed registers in Quadro control report (from 0-100%) */
|
||||
static u16 quadro_ctrl_fan_offsets[] = { 0x36, 0x8b, 0xe0, 0x135 };
|
||||
|
||||
/* Labels for D5 Next */
|
||||
static const char *const label_d5next_temp[] = {
|
||||
"Coolant temp"
|
||||
@ -124,7 +139,7 @@ static const char *const label_d5next_current[] = {
|
||||
"Fan current"
|
||||
};
|
||||
|
||||
/* Labels for Farbwerk, Farbwerk 360 and Octo temperature sensors */
|
||||
/* Labels for Farbwerk, Farbwerk 360 and Octo and Quadro temperature sensors */
|
||||
static const char *const label_temp_sensors[] = {
|
||||
"Sensor 1",
|
||||
"Sensor 2",
|
||||
@ -132,7 +147,7 @@ static const char *const label_temp_sensors[] = {
|
||||
"Sensor 4"
|
||||
};
|
||||
|
||||
/* Labels for Octo */
|
||||
/* Labels for Octo and Quadro (except speed) */
|
||||
static const char *const label_fan_speed[] = {
|
||||
"Fan 1 speed",
|
||||
"Fan 2 speed",
|
||||
@ -177,6 +192,15 @@ static const char *const label_fan_current[] = {
|
||||
"Fan 8 current"
|
||||
};
|
||||
|
||||
/* Labels for Quadro fan speeds */
|
||||
static const char *const label_quadro_speeds[] = {
|
||||
"Fan 1 speed",
|
||||
"Fan 2 speed",
|
||||
"Fan 3 speed",
|
||||
"Fan 4 speed",
|
||||
"Flow speed [dL/h]"
|
||||
};
|
||||
|
||||
struct aqc_data {
|
||||
struct hid_device *hdev;
|
||||
struct device *hwmon_dev;
|
||||
@ -197,6 +221,7 @@ struct aqc_data {
|
||||
int num_temp_sensors;
|
||||
int temp_sensor_start_offset;
|
||||
u16 power_cycle_count_offset;
|
||||
u8 flow_sensor_offset;
|
||||
|
||||
/* General info, same across all devices */
|
||||
u32 serial_number[2];
|
||||
@ -334,6 +359,18 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
|
||||
}
|
||||
break;
|
||||
case hwmon_fan:
|
||||
switch (priv->kind) {
|
||||
case quadro:
|
||||
/* Special case to support flow sensor */
|
||||
if (channel < priv->num_fans + 1)
|
||||
return 0444;
|
||||
break;
|
||||
default:
|
||||
if (channel < priv->num_fans)
|
||||
return 0444;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case hwmon_power:
|
||||
case hwmon_curr:
|
||||
if (channel < priv->num_fans)
|
||||
@ -578,6 +615,9 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
|
||||
priv->voltage_input[2] = get_unaligned_be16(data + D5NEXT_5V_VOLTAGE) * 10;
|
||||
priv->voltage_input[3] = get_unaligned_be16(data + D5NEXT_12V_VOLTAGE) * 10;
|
||||
break;
|
||||
case quadro:
|
||||
priv->speed_input[4] = get_unaligned_be16(data + priv->flow_sensor_offset);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
@ -719,6 +759,24 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
|
||||
priv->voltage_label = label_fan_voltage;
|
||||
priv->current_label = label_fan_current;
|
||||
break;
|
||||
case USB_PRODUCT_ID_QUADRO:
|
||||
priv->kind = quadro;
|
||||
|
||||
priv->num_fans = QUADRO_NUM_FANS;
|
||||
priv->fan_sensor_offsets = quadro_sensor_fan_offsets;
|
||||
priv->fan_ctrl_offsets = quadro_ctrl_fan_offsets;
|
||||
priv->num_temp_sensors = QUADRO_NUM_SENSORS;
|
||||
priv->temp_sensor_start_offset = QUADRO_SENSOR_START;
|
||||
priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;
|
||||
priv->buffer_size = QUADRO_CTRL_REPORT_SIZE;
|
||||
priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET;
|
||||
|
||||
priv->temp_label = label_temp_sensors;
|
||||
priv->speed_label = label_quadro_speeds;
|
||||
priv->power_label = label_fan_power;
|
||||
priv->voltage_label = label_fan_voltage;
|
||||
priv->current_label = label_fan_current;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
@ -774,6 +832,7 @@ static const struct hid_device_id aqc_table[] = {
|
||||
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) },
|
||||
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
|
||||
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
|
||||
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_QUADRO) },
|
||||
{ }
|
||||
};
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user