forked from Minki/linux
tipar: remove obsolete module
tipar: remove obsolete module The tipar character driver was used to implement bit-banging access to Texas Instruments parallel link cable. A user-land method now exists thru PPDEV & PARPORT. Signed-off-by: Romain Liévin <roms@lpg.ticalc.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Romain Liévin
Greg Kroah-Hartman
parent
8c4606b1a4
commit
cb8c9b6de0
@ -1,93 +0,0 @@
|
||||
|
||||
Parallel link cable for Texas Instruments handhelds
|
||||
===================================================
|
||||
|
||||
|
||||
Author: Romain Lievin
|
||||
Homepage: http://lpg.ticalc.org/prj_tidev/index.html
|
||||
|
||||
|
||||
INTRODUCTION:
|
||||
|
||||
This is a driver for the very common home-made parallel link cable, a cable
|
||||
designed for connecting TI8x/9x graphing calculators (handhelds) to a computer
|
||||
or workstation (Alpha, Sparc). Given that driver is built on parport, the
|
||||
parallel port abstraction layer, this driver is architecture-independent.
|
||||
|
||||
It can also be used with another device plugged on the same port (such as a
|
||||
ZIP drive). I have a 100MB ZIP and both of them work fine!
|
||||
|
||||
If you need more information, please visit the 'TI drivers' homepage at the URL
|
||||
above.
|
||||
|
||||
WHAT YOU NEED:
|
||||
|
||||
A TI calculator and a program capable of communicating with your calculator.
|
||||
|
||||
TiLP will work for sure (since I am its developer!). yal92 may be able to use
|
||||
it by changing tidev for tipar (may require some hacking...).
|
||||
|
||||
HOW TO USE IT:
|
||||
|
||||
You must have first compiled parport support (CONFIG_PARPORT_DEV): either
|
||||
compiled in your kernel, either as a module.
|
||||
|
||||
Next, (as root):
|
||||
|
||||
modprobe parport
|
||||
modprobe tipar
|
||||
|
||||
If it is not already there (it usually is), create the device:
|
||||
|
||||
mknod /dev/tipar0 c 115 0
|
||||
mknod /dev/tipar1 c 115 1
|
||||
mknod /dev/tipar2 c 115 2
|
||||
|
||||
You will have to set permissions on this device to allow you to read/write
|
||||
from it:
|
||||
|
||||
chmod 666 /dev/tipar[0..2]
|
||||
|
||||
Now you are ready to run a linking program such as TiLP. Be sure to configure
|
||||
it properly (RTFM).
|
||||
|
||||
MODULE PARAMETERS:
|
||||
|
||||
You can set these with: modprobe tipar NAME=VALUE
|
||||
There is currently no way to set these on a per-cable basis.
|
||||
|
||||
NAME: timeout
|
||||
TYPE: integer
|
||||
DEFAULT: 15
|
||||
DESC: Timeout value in tenth of seconds. If no data is available once this
|
||||
time has expired then the driver will return with a timeout error.
|
||||
|
||||
NAME: delay
|
||||
TYPE: integer
|
||||
DEFAULT: 10
|
||||
DESC: Inter-bit delay in micro-seconds. A lower value gives an higher data
|
||||
rate but makes transmission less reliable.
|
||||
|
||||
These parameters can be changed at run time by any program via ioctl(2) calls
|
||||
as listed in ./include/linux/ticable.h.
|
||||
|
||||
Rather than write 50 pages describing the ioctl() and so on, it is
|
||||
perhaps more useful you look at ticables library (dev_link.c) that demonstrates
|
||||
how to use them, and demonstrates the features of the driver. This is
|
||||
probably a lot more useful to people interested in writing applications
|
||||
that will be using this driver.
|
||||
|
||||
QUIRKS/BUGS:
|
||||
|
||||
None.
|
||||
|
||||
HOW TO CONTACT US:
|
||||
|
||||
You can email me at roms@lpg.ticalc.org. Please prefix the subject line
|
||||
with "TIPAR: " so that I am certain to notice your message.
|
||||
You can also mail JB at jb@jblache.org. He packaged these drivers for Debian.
|
||||
|
||||
CREDITS:
|
||||
|
||||
The code is based on tidev.c & parport.c.
|
||||
The driver has been developed independently of Texas Instruments.
|
||||
@ -3699,11 +3699,6 @@ M: nagar@watson.ibm.com
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Maintained
|
||||
|
||||
TI PARALLEL LINK CABLE DRIVER
|
||||
P: Romain Lievin
|
||||
M: roms@lpg.ticalc.org
|
||||
S: Maintained
|
||||
|
||||
TIPC NETWORK LAYER
|
||||
P: Per Liden
|
||||
M: per.liden@ericsson.com
|
||||
|
||||
@ -543,28 +543,6 @@ config PPDEV
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config TIPAR
|
||||
tristate "Texas Instruments parallel link cable support"
|
||||
depends on PARPORT
|
||||
---help---
|
||||
If you own a Texas Instruments graphing calculator and use a
|
||||
parallel link cable, then you might be interested in this driver.
|
||||
|
||||
If you enable this driver, you will be able to communicate with
|
||||
your calculator through a set of device nodes under /dev. The
|
||||
main advantage of this driver is that you don't have to be root
|
||||
to use this precise link cable (depending on the permissions on
|
||||
the device nodes, though).
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called tipar.
|
||||
|
||||
If you don't know what a parallel link cable is or what a Texas
|
||||
Instruments graphing calculator is, then you probably don't need this
|
||||
driver.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config HVC_DRIVER
|
||||
bool
|
||||
help
|
||||
|
||||
@ -1,557 +0,0 @@
|
||||
/* Hey EMACS -*- linux-c -*-
|
||||
*
|
||||
* tipar - low level driver for handling a parallel link cable designed
|
||||
* for Texas Instruments graphing calculators (http://lpg.ticalc.org).
|
||||
* A part of the TiLP project.
|
||||
*
|
||||
* Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org>
|
||||
* under the terms of the GNU General Public License.
|
||||
*
|
||||
* Various fixes & clean-up from the Linux Kernel Mailing List
|
||||
* (Alan Cox, Richard B. Johnson, Christoph Hellwig).
|
||||
*/
|
||||
|
||||
/* This driver should, in theory, work with any parallel port that has an
|
||||
* appropriate low-level driver; all I/O is done through the parport
|
||||
* abstraction layer.
|
||||
*
|
||||
* If this driver is built into the kernel, you can configure it using the
|
||||
* kernel command-line. For example:
|
||||
*
|
||||
* tipar=timeout,delay (set timeout and delay)
|
||||
*
|
||||
* If the driver is loaded as a module, similar functionality is available
|
||||
* using module parameters. The equivalent of the above commands would be:
|
||||
*
|
||||
* # insmod tipar timeout=15 delay=10
|
||||
*/
|
||||
|
||||
/* COMPATIBILITY WITH OLD KERNELS
|
||||
*
|
||||
* Usually, parallel cables were bound to ports at
|
||||
* particular I/O addresses, as follows:
|
||||
*
|
||||
* tipar0 0x378
|
||||
* tipar1 0x278
|
||||
* tipar2 0x3bc
|
||||
*
|
||||
*
|
||||
* This driver, by default, binds tipar devices according to parport and
|
||||
* the minor number.
|
||||
*
|
||||
*/
|
||||
#undef DEBUG /* change to #define to get debugging
|
||||
* output - for pr_debug() */
|
||||
#include <linux/module.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/fcntl.h>
|
||||
#include <linux/fs.h>
|
||||
#include <linux/init.h>
|
||||
#include <asm/uaccess.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <asm/io.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/parport.h> /* Our code depend on parport */
|
||||
#include <linux/device.h>
|
||||
|
||||
/*
|
||||
* TI definitions
|
||||
*/
|
||||
#include <linux/ticable.h>
|
||||
|
||||
/*
|
||||
* Version Information
|
||||
*/
|
||||
#define DRIVER_VERSION "1.19"
|
||||
#define DRIVER_AUTHOR "Romain Lievin <roms@lpg.ticalc.org>"
|
||||
#define DRIVER_DESC "Device driver for TI/PC parallel link cables"
|
||||
#define DRIVER_LICENSE "GPL"
|
||||
|
||||
#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
|
||||
|
||||
/* ----- global variables --------------------------------------------- */
|
||||
|
||||
struct tipar_struct {
|
||||
struct pardevice *dev; /* Parport device entry */
|
||||
};
|
||||
|
||||
#define PP_NO 3
|
||||
static struct tipar_struct table[PP_NO];
|
||||
|
||||
static int delay = IO_DELAY; /* inter-bit delay in microseconds */
|
||||
static int timeout = TIMAXTIME; /* timeout in tenth of seconds */
|
||||
|
||||
static unsigned int tp_count; /* tipar count */
|
||||
static unsigned long opened; /* opened devices */
|
||||
|
||||
static struct class *tipar_class;
|
||||
|
||||
/* --- macros for parport access -------------------------------------- */
|
||||
|
||||
#define r_dtr(x) (parport_read_data(table[(x)].dev->port))
|
||||
#define r_str(x) (parport_read_status(table[(x)].dev->port))
|
||||
#define w_ctr(x,y) (parport_write_control(table[(x)].dev->port, (y)))
|
||||
#define w_dtr(x,y) (parport_write_data(table[(x)].dev->port, (y)))
|
||||
|
||||
/* --- setting states on the D-bus with the right timing: ------------- */
|
||||
|
||||
static inline void
|
||||
outbyte(int value, int minor)
|
||||
{
|
||||
w_dtr(minor, value);
|
||||
}
|
||||
|
||||
static inline int
|
||||
inbyte(int minor)
|
||||
{
|
||||
return (r_str(minor));
|
||||
}
|
||||
|
||||
static inline void
|
||||
init_ti_parallel(int minor)
|
||||
{
|
||||
outbyte(3, minor);
|
||||
}
|
||||
|
||||
/* ----- global defines ----------------------------------------------- */
|
||||
|
||||
#define START(x) { x = jiffies + (HZ * timeout) / 10; }
|
||||
#define WAIT(x) { \
|
||||
if (time_before((x), jiffies)) return -1; \
|
||||
if (need_resched()) schedule(); }
|
||||
|
||||
/* ----- D-bus bit-banging functions ---------------------------------- */
|
||||
|
||||
/* D-bus protocol (45kbit/s max):
|
||||
1 0 0
|
||||
_______ ______|______ __________|________ __________
|
||||
Red : ________ | ____ | ____
|
||||
_ ____________|________ ______|__________ _____
|
||||
White: ________ | ______ | _______
|
||||
*/
|
||||
|
||||
/* Try to transmit a byte on the specified port (-1 if error). */
|
||||
static int
|
||||
put_ti_parallel(int minor, unsigned char data)
|
||||
{
|
||||
unsigned int bit;
|
||||
unsigned long max;
|
||||
|
||||
for (bit = 0; bit < 8; bit++) {
|
||||
if (data & 1) {
|
||||
outbyte(2, minor);
|
||||
START(max);
|
||||
do {
|
||||
WAIT(max);
|
||||
} while (inbyte(minor) & 0x10);
|
||||
|
||||
outbyte(3, minor);
|
||||
START(max);
|
||||
do {
|
||||
WAIT(max);
|
||||
} while (!(inbyte(minor) & 0x10));
|
||||
} else {
|
||||
outbyte(1, minor);
|
||||
START(max);
|
||||
do {
|
||||
WAIT(max);
|
||||
} while (inbyte(minor) & 0x20);
|
||||
|
||||
outbyte(3, minor);
|
||||
START(max);
|
||||
do {
|
||||
WAIT(max);
|
||||
} while (!(inbyte(minor) & 0x20));
|
||||
}
|
||||
|
||||
data >>= 1;
|
||||
udelay(delay);
|
||||
|
||||
if (need_resched())
|
||||
schedule();
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Receive a byte on the specified port or -1 if error. */
|
||||
static int
|
||||
get_ti_parallel(int minor)
|
||||
{
|
||||
unsigned int bit;
|
||||
unsigned char v, data = 0;
|
||||
unsigned long max;
|
||||
|
||||
for (bit = 0; bit < 8; bit++) {
|
||||
START(max);
|
||||
do {
|
||||
WAIT(max);
|
||||
} while ((v = inbyte(minor) & 0x30) == 0x30);
|
||||
|
||||
if (v == 0x10) {
|
||||
data = (data >> 1) | 0x80;
|
||||
outbyte(1, minor);
|
||||
START(max);
|
||||
do {
|
||||
WAIT(max);
|
||||
} while (!(inbyte(minor) & 0x20));
|
||||
outbyte(3, minor);
|
||||
} else {
|
||||
data = data >> 1;
|
||||
outbyte(2, minor);
|
||||
START(max);
|
||||
do {
|
||||
WAIT(max);
|
||||
} while (!(inbyte(minor) & 0x10));
|
||||
outbyte(3, minor);
|
||||
}
|
||||
|
||||
udelay(delay);
|
||||
if (need_resched())
|
||||
schedule();
|
||||
}
|
||||
|
||||
return (int) data;
|
||||
}
|
||||
|
||||
/* Try to detect a parallel link cable on the specified port */
|
||||
static int
|
||||
probe_ti_parallel(int minor)
|
||||
{
|
||||
int i;
|
||||
int seq[] = { 0x00, 0x20, 0x10, 0x30 };
|
||||
int data;
|
||||
|
||||
for (i = 3; i >= 0; i--) {
|
||||
outbyte(3, minor);
|
||||
outbyte(i, minor);
|
||||
udelay(delay);
|
||||
data = inbyte(minor) & 0x30;
|
||||
pr_debug("tipar: Probing -> %i: 0x%02x 0x%02x\n", i,
|
||||
data, seq[i]);
|
||||
if (data != seq[i]) {
|
||||
outbyte(3, minor);
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
outbyte(3, minor);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* ----- kernel module functions--------------------------------------- */
|
||||
|
||||
static int
|
||||
tipar_open(struct inode *inode, struct file *file)
|
||||
{
|
||||
unsigned int minor = iminor(inode) - TIPAR_MINOR;
|
||||
|
||||
if (tp_count == 0 || minor > tp_count - 1)
|
||||
return -ENXIO;
|
||||
|
||||
if (test_and_set_bit(minor, &opened))
|
||||
return -EBUSY;
|
||||
|
||||
if (!table[minor].dev) {
|
||||
printk(KERN_ERR "%s: NULL device for minor %u\n",
|
||||
__FUNCTION__, minor);
|
||||
return -ENXIO;
|
||||
}
|
||||
parport_claim_or_block(table[minor].dev);
|
||||
init_ti_parallel(minor);
|
||||
parport_release(table[minor].dev);
|
||||
|
||||
return nonseekable_open(inode, file);
|
||||
}
|
||||
|
||||
static int
|
||||
tipar_close(struct inode *inode, struct file *file)
|
||||
{
|
||||
unsigned int minor = iminor(inode) - TIPAR_MINOR;
|
||||
|
||||
if (minor > tp_count - 1)
|
||||
return -ENXIO;
|
||||
|
||||
clear_bit(minor, &opened);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static ssize_t
|
||||
tipar_write (struct file *file, const char __user *buf, size_t count,
|
||||
loff_t * ppos)
|
||||
{
|
||||
unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR;
|
||||
ssize_t n;
|
||||
|
||||
parport_claim_or_block(table[minor].dev);
|
||||
|
||||
for (n = 0; n < count; n++) {
|
||||
unsigned char b;
|
||||
|
||||
if (get_user(b, buf + n)) {
|
||||
n = -EFAULT;
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (put_ti_parallel(minor, b) == -1) {
|
||||
init_ti_parallel(minor);
|
||||
n = -ETIMEDOUT;
|
||||
goto out;
|
||||
}
|
||||
}
|
||||
out:
|
||||
parport_release(table[minor].dev);
|
||||
return n;
|
||||
}
|
||||
|
||||
static ssize_t
|
||||
tipar_read(struct file *file, char __user *buf, size_t count, loff_t * ppos)
|
||||
{
|
||||
int b = 0;
|
||||
unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR;
|
||||
ssize_t retval = 0;
|
||||
ssize_t n = 0;
|
||||
|
||||
if (count == 0)
|
||||
return 0;
|
||||
|
||||
parport_claim_or_block(table[minor].dev);
|
||||
|
||||
while (n < count) {
|
||||
b = get_ti_parallel(minor);
|
||||
if (b == -1) {
|
||||
init_ti_parallel(minor);
|
||||
retval = -ETIMEDOUT;
|
||||
goto out;
|
||||
} else {
|
||||
if (put_user(b, buf + n)) {
|
||||
retval = -EFAULT;
|
||||
break;
|
||||
} else
|
||||
retval = ++n;
|
||||
}
|
||||
|
||||
/* Non-blocking mode : try again ! */
|
||||
if (file->f_flags & O_NONBLOCK) {
|
||||
retval = -EAGAIN;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* Signal pending, try again ! */
|
||||
if (signal_pending(current)) {
|
||||
retval = -ERESTARTSYS;
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (need_resched())
|
||||
schedule();
|
||||
}
|
||||
|
||||
out:
|
||||
parport_release(table[minor].dev);
|
||||
return retval;
|
||||
}
|
||||
|
||||
static int
|
||||
tipar_ioctl(struct inode *inode, struct file *file,
|
||||
unsigned int cmd, unsigned long arg)
|
||||
{
|
||||
int retval = 0;
|
||||
|
||||
switch (cmd) {
|
||||
case IOCTL_TIPAR_DELAY:
|
||||
delay = (int)arg; //get_user(delay, &arg);
|
||||
break;
|
||||
case IOCTL_TIPAR_TIMEOUT:
|
||||
if (arg != 0)
|
||||
timeout = (int)arg;
|
||||
else
|
||||
retval = -EINVAL;
|
||||
break;
|
||||
default:
|
||||
retval = -ENOTTY;
|
||||
break;
|
||||
}
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
/* ----- kernel module registering ------------------------------------ */
|
||||
|
||||
static const struct file_operations tipar_fops = {
|
||||
.owner = THIS_MODULE,
|
||||
.llseek = no_llseek,
|
||||
.read = tipar_read,
|
||||
.write = tipar_write,
|
||||
.ioctl = tipar_ioctl,
|
||||
.open = tipar_open,
|
||||
.release = tipar_close,
|
||||
};
|
||||
|
||||
/* --- initialisation code ------------------------------------- */
|
||||
|
||||
#ifndef MODULE
|
||||
/* You must set these - there is no sane way to probe for this cable.
|
||||
* You can use 'tipar=timeout,delay' to set these now. */
|
||||
static int __init
|
||||
tipar_setup(char *str)
|
||||
{
|
||||
int ints[3];
|
||||
|
||||
str = get_options(str, ARRAY_SIZE(ints), ints);
|
||||
|
||||
if (ints[0] > 0) {
|
||||
if (ints[1] != 0)
|
||||
timeout = ints[1];
|
||||
else
|
||||
printk(KERN_WARNING "tipar: bad timeout value (0), "
|
||||
"using default value instead");
|
||||
if (ints[0] > 1) {
|
||||
delay = ints[2];
|
||||
}
|
||||
}
|
||||
|
||||
return 1;
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Register our module into parport.
|
||||
* Pass also 2 callbacks functions to parport: a pre-emptive function and an
|
||||
* interrupt handler function (unused).
|
||||
* Display a message such "tipar0: using parport0 (polling)".
|
||||
*/
|
||||
static int
|
||||
tipar_register(int nr, struct parport *port)
|
||||
{
|
||||
int err = 0;
|
||||
|
||||
/* Register our module into parport */
|
||||
table[nr].dev = parport_register_device(port, "tipar",
|
||||
NULL, NULL, NULL, 0,
|
||||
(void *) &table[nr]);
|
||||
|
||||
if (table[nr].dev == NULL) {
|
||||
err = 1;
|
||||
goto out;
|
||||
}
|
||||
|
||||
device_create(tipar_class, port->dev, MKDEV(TIPAR_MAJOR,
|
||||
TIPAR_MINOR + nr), "par%d", nr);
|
||||
|
||||
/* Display informations */
|
||||
pr_info("tipar%d: using %s (%s)\n", nr, port->name, (port->irq ==
|
||||
PARPORT_IRQ_NONE) ? "polling" : "interrupt-driven");
|
||||
|
||||
if (probe_ti_parallel(nr) != -1)
|
||||
pr_info("tipar%d: link cable found\n", nr);
|
||||
else
|
||||
pr_info("tipar%d: link cable not found\n", nr);
|
||||
|
||||
err = 0;
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static void
|
||||
tipar_attach(struct parport *port)
|
||||
{
|
||||
if (tp_count == PP_NO) {
|
||||
pr_info("tipar: ignoring parallel port (max. %d)\n", PP_NO);
|
||||
return;
|
||||
}
|
||||
|
||||
if (!tipar_register(tp_count, port))
|
||||
tp_count++;
|
||||
}
|
||||
|
||||
static void
|
||||
tipar_detach(struct parport *port)
|
||||
{
|
||||
/* Nothing to do */
|
||||
}
|
||||
|
||||
static struct parport_driver tipar_driver = {
|
||||
.name = "tipar",
|
||||
.attach = tipar_attach,
|
||||
.detach = tipar_detach,
|
||||
};
|
||||
|
||||
static int __init
|
||||
tipar_init_module(void)
|
||||
{
|
||||
int err = 0;
|
||||
|
||||
pr_info("tipar: parallel link cable driver, version %s\n",
|
||||
DRIVER_VERSION);
|
||||
|
||||
if (register_chrdev(TIPAR_MAJOR, "tipar", &tipar_fops)) {
|
||||
printk(KERN_ERR "tipar: unable to get major %d\n", TIPAR_MAJOR);
|
||||
err = -EIO;
|
||||
goto out;
|
||||
}
|
||||
|
||||
tipar_class = class_create(THIS_MODULE, "ticables");
|
||||
if (IS_ERR(tipar_class)) {
|
||||
err = PTR_ERR(tipar_class);
|
||||
goto out_chrdev;
|
||||
}
|
||||
if (parport_register_driver(&tipar_driver)) {
|
||||
printk(KERN_ERR "tipar: unable to register with parport\n");
|
||||
err = -EIO;
|
||||
goto out_class;
|
||||
}
|
||||
|
||||
err = 0;
|
||||
goto out;
|
||||
|
||||
out_class:
|
||||
class_destroy(tipar_class);
|
||||
|
||||
out_chrdev:
|
||||
unregister_chrdev(TIPAR_MAJOR, "tipar");
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static void __exit
|
||||
tipar_cleanup_module(void)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
/* Unregistering module */
|
||||
parport_unregister_driver(&tipar_driver);
|
||||
|
||||
unregister_chrdev(TIPAR_MAJOR, "tipar");
|
||||
|
||||
for (i = 0; i < PP_NO; i++) {
|
||||
if (table[i].dev == NULL)
|
||||
continue;
|
||||
parport_unregister_device(table[i].dev);
|
||||
device_destroy(tipar_class, MKDEV(TIPAR_MAJOR, i));
|
||||
}
|
||||
class_destroy(tipar_class);
|
||||
|
||||
pr_info("tipar: module unloaded\n");
|
||||
}
|
||||
|
||||
/* --------------------------------------------------------------------- */
|
||||
|
||||
__setup("tipar=", tipar_setup);
|
||||
module_init(tipar_init_module);
|
||||
module_exit(tipar_cleanup_module);
|
||||
|
||||
MODULE_AUTHOR(DRIVER_AUTHOR);
|
||||
MODULE_DESCRIPTION(DRIVER_DESC);
|
||||
MODULE_LICENSE(DRIVER_LICENSE);
|
||||
|
||||
module_param(timeout, int, 0);
|
||||
MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)");
|
||||
module_param(delay, int, 0);
|
||||
MODULE_PARM_DESC(delay, "Inter-bit delay (default=10 microseconds)");
|
||||
@ -1,44 +0,0 @@
|
||||
/* Hey EMACS -*- linux-c -*-
|
||||
*
|
||||
* tipar/tiser/tiusb - low level driver for handling link cables
|
||||
* designed for Texas Instruments graphing calculators.
|
||||
*
|
||||
* Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org>
|
||||
*
|
||||
* Redistribution of this file is permitted under the terms of the GNU
|
||||
* Public License (GPL)
|
||||
*/
|
||||
|
||||
#ifndef _TICABLE_H
|
||||
#define _TICABLE_H 1
|
||||
|
||||
/* Internal default constants for the kernel module */
|
||||
#define TIMAXTIME 15 /* 1.5 seconds */
|
||||
#define IO_DELAY 10 /* 10 micro-seconds */
|
||||
|
||||
/* Major & minor number for character devices */
|
||||
#define TIPAR_MAJOR 115 /* 0 to 7 */
|
||||
#define TIPAR_MINOR 0
|
||||
|
||||
#define TISER_MAJOR 115 /* 8 to 15 */
|
||||
#define TISER_MINOR 8
|
||||
|
||||
#define TIUSB_MAJOR 115 /* 16 to 31 */
|
||||
#define TIUSB_MINOR 16
|
||||
|
||||
/*
|
||||
* Request values for the 'ioctl' function.
|
||||
*/
|
||||
#define IOCTL_TIPAR_DELAY _IOW('p', 0xa8, int) /* set delay */
|
||||
#define IOCTL_TIPAR_TIMEOUT _IOW('p', 0xa9, int) /* set timeout */
|
||||
|
||||
#define IOCTL_TISER_DELAY _IOW('p', 0xa0, int) /* set delay */
|
||||
#define IOCTL_TISER_TIMEOUT _IOW('p', 0xa1, int) /* set timeout */
|
||||
|
||||
#define IOCTL_TIUSB_TIMEOUT _IOW('N', 0x20, int) /* set timeout */
|
||||
#define IOCTL_TIUSB_RESET_DEVICE _IOW('N', 0x21, int) /* reset device */
|
||||
#define IOCTL_TIUSB_RESET_PIPES _IOW('N', 0x22, int) /* reset both pipes*/
|
||||
#define IOCTL_TIUSB_GET_MAXPS _IOR('N', 0x23, int) /* max packet size */
|
||||
#define IOCTL_TIUSB_GET_DEVID _IOR('N', 0x24, int) /* get device type */
|
||||
|
||||
#endif /* TICABLE_H */
|
||||
Loading…
Reference in New Issue
Block a user