mvebu dt changes for v4.1 (part #2)

- add support for Performance Monitor Unit on most of mvebu SoCs
 - add nas2big support
 - add support for USB3 port On Armada 385 AP
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlUL6VsACgkQCwYYjhRyO9Vm/wCfZNIo3l1U82ietdSE8zuVWq1U
 A2gAmQHeLLV6izood0nm9/AvvcMHPpI5
 =rtR1
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-4.1-2' of git://git.infradead.org/linux-mvebu into next/dt

Merge "ARM: mvebu: dt changes for v4.1 (round 2)" from Gregory Clement:

mvebu dt changes for v4.1 (part #2)

- add support for Performance Monitor Unit on most of mvebu SoCs
- add nas2big support
- add support for USB3 port On Armada 385 AP

* tag 'mvebu-dt-4.1-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: armada-385-ap: Enable USB3 port
  ARM: mvebu: Enable Performance Monitor Unit on Armada 380/385 SoC
  ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC
  ARM: mvebu: Enable Performance Monitor Unit on Armada XP/370 SoCs
  ARM: Kirkwood: add DT description for nas2big

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/marvell,kirkwood.txt

@@ -42,6 +42,7 @@ board. Currently known boards are:
 "lacie,cloudbox"
 "lacie,inetspace_v2"
 "lacie,laplug"
+"lacie,nas2big"
 "lacie,netspace_lite_v2"
 "lacie,netspace_max_v2"
 "lacie,netspace_mini_v2"

arch/arm/boot/dts/Makefile

@@ -170,6 +170,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-lsxhl.dtb \
 	kirkwood-mplcec4.dtb \
 	kirkwood-mv88f6281gtw-ge.dtb \
+	kirkwood-nas2big.dtb \
 	kirkwood-net2big.dtb \
 	kirkwood-net5big.dtb \
 	kirkwood-netgear_readynas_duo_v2.dtb \

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -73,6 +73,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <1>;

arch/arm/boot/dts/armada-375.dtsi

@@ -96,6 +96,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
 	soc {
 		compatible = "marvell,armada375-mbus", "simple-bus";
 		#address-cells = <2>;

arch/arm/boot/dts/armada-385-db-ap.dts

@@ -125,6 +125,13 @@
 				status = "okay";
 			};
 
+			pinctrl@18000 {
+				xhci0_vbus_pins: xhci0-vbus-pins {
+					marvell,pins = "mpp44";
+					marvell,function = "gpio";
+				};
+			};
+
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
@@ -162,6 +169,11 @@
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
 			};
+
+			usb3@f0000 {
+				status = "okay";
+				usb-phy = <&usb3_phy>;
+			};
 		};
 
 		pcie-controller {
@@ -187,4 +199,20 @@
 			};
 		};
 	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_xhci0_vbus>;
+	};
+
+	reg_xhci0_vbus: xhci0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci0_vbus_pins>;
+		regulator-name = "xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	};
 };

arch/arm/boot/dts/armada-38x.dtsi

@@ -63,6 +63,11 @@
 		serial1 = &uart1;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
 	soc {
 		compatible = "marvell,armada380-mbus", "simple-bus";
 		#address-cells = <2>;

arch/arm/boot/dts/kirkwood-nas2big.dts

@@ -0,0 +1,143 @@
+/*
+ * Device Tree file for LaCie 2Big NAS
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 2Big NAS";
+	compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		rtc@10300 {
+			/* The on-chip RTC is not powered (no supercap). */
+			status = "disabled";
+		};
+		spi@10600 {
+			/*
+			 * A NAND flash is used instead of an SPI flash for
+			 * the other netxbig-compatible boards.
+			 */
+			status = "disabled";
+		};
+	};
+
+	fan {
+		/*
+		 * An I2C fan controller (GMT G762) is used but alarm is
+		 * wired to a separate GPIO.
+		 */
+		compatible = "gpio-fan";
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators: regulators {
+		status = "okay";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+		clocks {
+			g762_clk: g762-oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	/*
+	 * An external I2C RTC (Dallas DS1337S+) is used. This allows
+	 * to power-up the board on an RTC alarm. The external RTC can
+	 * be kept powered, even when the SoC is off.
+	 */
+	rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+		interrupts = <43>;
+	};
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
+
+&nand {
+	chip-delay = <50>;
+	status = "okay";
+
+	partition@0 {
+		label = "U-Boot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x1000000>;
+	};
+
+	partition@1100000 {
+		label = "root";
+		reg = <0x1100000 0x8000000>;
+	};
+
+	partition@9100000 {
+		label = "unused";
+		reg = <0x9100000 0x6f00000>;
+	};
+};