Merge tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree fixes from Rob Herring:

 - Remove mc13892 as a trivial device

 - Improve of_find_node_by_name() documentation

 - Fix unit test dtc warnings

 - Clean-ups of USB binding documentation

 - Fix potential NULL deref in of_pci_map_rid

* tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: trivial-devices: Remove fsl,mc13892
  of: Document exactly what of_find_node_by_name() puts
  of: unittest: disable interrupts_property warning
  of: unittest: let dtc generate __local_fixups__
  dt-bindings: usb: document hub and host-controller properties
  dt-bindings: usb: clean up compatible property
  dt-bindings: usb: fix reg-property port-number range
  dt-bindings: usb: fix example hub node name
  of/pci: Fix theoretical NULL dereference

Documentation/devicetree/bindings/trivial-devices.txt

@@ -55,7 +55,6 @@ epson,rx8010		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 emmicro,em3027		EM Microelectronic EM3027 Real-time Clock
 fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
-fsl,mc13892		MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
 fsl,mma7660		MMA7660FC: 3-Axis Orientation/Motion Detection Sensor
 fsl,mma8450		MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
 fsl,mpl3115		MPL3115: Absolute Digital Pressure Sensor

Documentation/devicetree/bindings/usb/usb-device.txt

@@ -4,24 +4,35 @@ Usually, we only use device tree for hard wired USB device.
 The reference binding doc is from:
 http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
 
+
 Required properties:
-- compatible: usbVID,PID. The textual representation of VID, PID shall
+- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
-  be in lower case hexadecimal with leading zeroes suppressed. The
+  The textual representation of VID and PID shall be in lower case hexadecimal
-  other compatible strings from the above standard binding could also
+  with leading zeroes suppressed. The other compatible strings from the above
-  be used, but a device adhering to this binding may leave out all except
+  standard binding could also be used, but a device adhering to this binding
-  for usbVID,PID.
+  may leave out all except for "usbVID,PID".
-- reg: the port number which this device is connecting to, the range
+- reg: the number of the USB hub port or the USB host-controller port to which
-  is 1-31.
+  this device is attached. The range is 1-255.
+
+
+Required properties for hub nodes with device nodes:
+- #address-cells: shall be 1
+- #size-cells: shall be 0
+
+
+Required properties for host-controller nodes with device nodes:
+- #address-cells: shall be 1
+- #size-cells: shall be 0
+
 
 Example:
 
-&usb1 {
+&usb1 {	/* host controller */
-
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	hub: genesys@1 {
+	hub@1 {	/* hub connected to port 1 */
 		compatible = "usb5e3,608";
 		reg = <1>;
 	};
-}
+};

drivers/of/base.c

@@ -761,10 +761,10 @@ EXPORT_SYMBOL(of_find_node_opts_by_path);
 
 /**
  *	of_find_node_by_name - Find a node by its "name" property
- *	@from:	The node to start searching from or NULL, the node
+ *	@from:	The node to start searching from or NULL; the node
  *		you pass will not be searched, only the next one
- *		will; typically, you pass what the previous call
+ *		will. Typically, you pass what the previous call
- *		returned. of_node_put() will be called on it
+ *		returned. of_node_put() will be called on @from.
  *	@name:	The name string to match against
  *
  *	Returns a node pointer with refcount incremented, use

drivers/of/of_pci.c

@@ -374,7 +374,7 @@ int of_pci_map_rid(struct device_node *np, u32 rid,
 
 		pr_debug("%pOF: %s, using mask %08x, rid-base: %08x, out-base: %08x, length: %08x, rid: %08x -> %08x\n",
 			np, map_name, map_mask, rid_base, out_base,
-			rid_len, rid, *id_out);
+			rid_len, rid, masked_rid - rid_base + out_base);
 		return 0;
 	}
 

drivers/of/unittest-data/Makefile

@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+DTC_FLAGS_testcases := -Wno-interrupts_property
 obj-y += testcases.dtb.o
 
 targets += testcases.dtb testcases.dtb.S

drivers/of/unittest-data/testcases.dts

@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
+/plugin/;
+
 / {
 	testcase-data {
 		changeset {
@@ -15,66 +17,3 @@
 #include "tests-match.dtsi"
 #include "tests-platform.dtsi"
 #include "tests-overlay.dtsi"
-
-/*
- * phandle fixup data - generated by dtc patches that aren't upstream.
- * This data must be regenerated whenever phandle references are modified in
- * the testdata tree.
- *
- * The format of this data may be subject to change. For the time being consider
- * this a kernel-internal data format.
- */
-/ { __local_fixups__ {
-	testcase-data {
-		phandle-tests {
-			consumer-a {
-				phandle-list = <0x00000000 0x00000008
-						0x00000018 0x00000028
-						0x00000034 0x00000038>;
-				phandle-list-bad-args = <0x00000000 0x0000000c>;
-			};
-		};
-		interrupts {
-			intmap0 {
-				interrupt-map = <0x00000004 0x00000010
-						 0x00000024 0x00000034>;
-			};
-			intmap1 {
-				interrupt-map = <0x0000000c>;
-			};
-			interrupts0 {
-				interrupt-parent = <0x00000000>;
-			};
-			interrupts1 {
-				interrupt-parent = <0x00000000>;
-			};
-			interrupts-extended0 {
-				interrupts-extended = <0x00000000 0x00000008
-						       0x00000018 0x00000024
-						       0x0000002c 0x00000034
-						       0x0000003c>;
-			};
-		};
-		testcase-device1 {
-			interrupt-parent = <0x00000000>;
-		};
-		testcase-device2 {
-			interrupt-parent = <0x00000000>;
-		};
-		overlay2 {
-			fragment@0 {
-				target = <0x00000000>;
-			};
-		};
-		overlay3 {
-			fragment@0 {
-				target = <0x00000000>;
-			};
-		};
-		overlay4 {
-			fragment@0 {
-				target = <0x00000000>;
-			};
-		};
-	};
-}; };