forked from Minki/linux
ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform
This patch adds support for the ahci sata controler found on Allwinner A10 and A20 SoCs to the ahci_platform driver. Orignally written by Olliver Schinagl using the approach of having a platform device which probe method creates a new child platform device which gets driven by ahci_platform.c, as done by ahci_imx.c . Refactored by Hans de Goede to add most of the non sunxi specific functionality to ahci_platform.c and use a platform_data pointer from of_device_id for the sunxi specific bits. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
This commit is contained in:
Olliver Schinagl
Tejun Heo
parent
648cb6fd83
commit
c5754b5220
@ -4,7 +4,9 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
|
||||
Each SATA controller should have its own node.
|
||||
|
||||
Required properties:
|
||||
- compatible : compatible list, contains "snps,spear-ahci"
|
||||
- compatible : compatible list, one of "snps,spear-ahci",
|
||||
"snps,exynos5440-ahci", "ibm,476gtr-ahci", or
|
||||
"allwinner,sun4i-a10-ahci"
|
||||
- interrupts : <interrupt mapping for SATA IRQ>
|
||||
- reg : <registers mapping>
|
||||
|
||||
@ -13,10 +15,17 @@ Optional properties:
|
||||
- clocks : a list of phandle + clock specifier pairs
|
||||
- target-supply : regulator for SATA target power
|
||||
|
||||
Example:
|
||||
Examples:
|
||||
sata@ffe08000 {
|
||||
compatible = "snps,spear-ahci";
|
||||
reg = <0xffe08000 0x1000>;
|
||||
interrupts = <115>;
|
||||
|
||||
};
|
||||
|
||||
ahci: sata@01c18000 {
|
||||
compatible = "allwinner,sun4i-a10-ahci";
|
||||
reg = <0x01c18000 0x1000>;
|
||||
interrupts = <56>;
|
||||
clocks = <&pll6 0>, <&ahb_gates 25>;
|
||||
target-supply = <®_ahci_5v>;
|
||||
};
|
||||
|
||||
@ -106,6 +106,15 @@ config AHCI_IMX
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config AHCI_SUNXI
|
||||
tristate "Allwinner sunxi AHCI SATA support"
|
||||
depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
|
||||
help
|
||||
This option enables support for the Allwinner sunxi SoC's
|
||||
onboard AHCI SATA.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config SATA_FSL
|
||||
tristate "Freescale 3.0Gbps SATA support"
|
||||
depends on FSL_SOC
|
||||
|
||||
@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
|
||||
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
|
||||
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
|
||||
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
|
||||
obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o
|
||||
|
||||
# SFF w/ custom DMA
|
||||
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
|
||||
|
||||
249
drivers/ata/ahci_sunxi.c
Normal file
249
drivers/ata/ahci_sunxi.c
Normal file
@ -0,0 +1,249 @@
|
||||
/*
|
||||
* Allwinner sunxi AHCI SATA platform driver
|
||||
* Copyright 2013 Olliver Schinagl <oliver@schinagl.nl>
|
||||
* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
|
||||
*
|
||||
* based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
|
||||
* Based on code from Allwinner Technology Co., Ltd. <www.allwinnertech.com>,
|
||||
* Daniel Wang <danielwang@allwinnertech.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*/
|
||||
|
||||
#include <linux/ahci_platform.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include "ahci.h"
|
||||
|
||||
#define AHCI_BISTAFR 0x00a0
|
||||
#define AHCI_BISTCR 0x00a4
|
||||
#define AHCI_BISTFCTR 0x00a8
|
||||
#define AHCI_BISTSR 0x00ac
|
||||
#define AHCI_BISTDECR 0x00b0
|
||||
#define AHCI_DIAGNR0 0x00b4
|
||||
#define AHCI_DIAGNR1 0x00b8
|
||||
#define AHCI_OOBR 0x00bc
|
||||
#define AHCI_PHYCS0R 0x00c0
|
||||
#define AHCI_PHYCS1R 0x00c4
|
||||
#define AHCI_PHYCS2R 0x00c8
|
||||
#define AHCI_TIMER1MS 0x00e0
|
||||
#define AHCI_GPARAM1R 0x00e8
|
||||
#define AHCI_GPARAM2R 0x00ec
|
||||
#define AHCI_PPARAMR 0x00f0
|
||||
#define AHCI_TESTR 0x00f4
|
||||
#define AHCI_VERSIONR 0x00f8
|
||||
#define AHCI_IDR 0x00fc
|
||||
#define AHCI_RWCR 0x00fc
|
||||
#define AHCI_P0DMACR 0x0170
|
||||
#define AHCI_P0PHYCR 0x0178
|
||||
#define AHCI_P0PHYSR 0x017c
|
||||
|
||||
static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
|
||||
{
|
||||
u32 reg_val;
|
||||
|
||||
reg_val = readl(reg);
|
||||
reg_val &= ~(clr_val);
|
||||
writel(reg_val, reg);
|
||||
}
|
||||
|
||||
static void sunxi_setbits(void __iomem *reg, u32 set_val)
|
||||
{
|
||||
u32 reg_val;
|
||||
|
||||
reg_val = readl(reg);
|
||||
reg_val |= set_val;
|
||||
writel(reg_val, reg);
|
||||
}
|
||||
|
||||
static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
|
||||
{
|
||||
u32 reg_val;
|
||||
|
||||
reg_val = readl(reg);
|
||||
reg_val &= ~(clr_val);
|
||||
reg_val |= set_val;
|
||||
writel(reg_val, reg);
|
||||
}
|
||||
|
||||
static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
|
||||
{
|
||||
return (readl(reg) >> shift) & mask;
|
||||
}
|
||||
|
||||
static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
|
||||
{
|
||||
u32 reg_val;
|
||||
int timeout;
|
||||
|
||||
/* This magic is from the original code */
|
||||
writel(0, reg_base + AHCI_RWCR);
|
||||
mdelay(5);
|
||||
|
||||
sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
|
||||
sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
|
||||
(0x7 << 24),
|
||||
(0x5 << 24) | BIT(23) | BIT(18));
|
||||
sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
|
||||
(0x3 << 16) | (0x1f << 8) | (0x3 << 6),
|
||||
(0x2 << 16) | (0x6 << 8) | (0x2 << 6));
|
||||
sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
|
||||
sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
|
||||
sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
|
||||
(0x7 << 20), (0x3 << 20));
|
||||
sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
|
||||
(0x1f << 5), (0x19 << 5));
|
||||
mdelay(5);
|
||||
|
||||
sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
|
||||
|
||||
timeout = 250; /* Power up takes aprox 50 us */
|
||||
do {
|
||||
reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
|
||||
if (reg_val == 0x02)
|
||||
break;
|
||||
|
||||
if (--timeout == 0) {
|
||||
dev_err(dev, "PHY power up failed.\n");
|
||||
return -EIO;
|
||||
}
|
||||
udelay(1);
|
||||
} while (1);
|
||||
|
||||
sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
|
||||
|
||||
timeout = 100; /* Calibration takes aprox 10 us */
|
||||
do {
|
||||
reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
|
||||
if (reg_val == 0x00)
|
||||
break;
|
||||
|
||||
if (--timeout == 0) {
|
||||
dev_err(dev, "PHY calibration failed.\n");
|
||||
return -EIO;
|
||||
}
|
||||
udelay(1);
|
||||
} while (1);
|
||||
|
||||
mdelay(15);
|
||||
|
||||
writel(0x7, reg_base + AHCI_RWCR);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ahci_sunxi_start_engine(struct ata_port *ap)
|
||||
{
|
||||
void __iomem *port_mmio = ahci_port_base(ap);
|
||||
struct ahci_host_priv *hpriv = ap->host->private_data;
|
||||
|
||||
/* Setup DMA before DMA start */
|
||||
sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400);
|
||||
|
||||
/* Start DMA */
|
||||
sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START);
|
||||
}
|
||||
|
||||
static const struct ata_port_info ahci_sunxi_port_info = {
|
||||
AHCI_HFLAGS(AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
|
||||
AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ),
|
||||
.flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
|
||||
.pio_mask = ATA_PIO4,
|
||||
.udma_mask = ATA_UDMA6,
|
||||
.port_ops = &ahci_platform_ops,
|
||||
};
|
||||
|
||||
static int ahci_sunxi_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct ahci_host_priv *hpriv;
|
||||
int rc;
|
||||
|
||||
hpriv = ahci_platform_get_resources(pdev);
|
||||
if (IS_ERR(hpriv))
|
||||
return PTR_ERR(hpriv);
|
||||
|
||||
hpriv->start_engine = ahci_sunxi_start_engine;
|
||||
|
||||
rc = ahci_platform_enable_resources(hpriv);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
|
||||
if (rc)
|
||||
goto disable_resources;
|
||||
|
||||
rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info, 0, 0);
|
||||
if (rc)
|
||||
goto disable_resources;
|
||||
|
||||
return 0;
|
||||
|
||||
disable_resources:
|
||||
ahci_platform_disable_resources(hpriv);
|
||||
return rc;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
int ahci_sunxi_resume(struct device *dev)
|
||||
{
|
||||
struct ata_host *host = dev_get_drvdata(dev);
|
||||
struct ahci_host_priv *hpriv = host->private_data;
|
||||
int rc;
|
||||
|
||||
rc = ahci_platform_enable_resources(hpriv);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
|
||||
if (rc)
|
||||
goto disable_resources;
|
||||
|
||||
rc = ahci_platform_resume_host(dev);
|
||||
if (rc)
|
||||
goto disable_resources;
|
||||
|
||||
return 0;
|
||||
|
||||
disable_resources:
|
||||
ahci_platform_disable_resources(hpriv);
|
||||
return rc;
|
||||
}
|
||||
#endif
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend,
|
||||
ahci_sunxi_resume);
|
||||
|
||||
static const struct of_device_id ahci_sunxi_of_match[] = {
|
||||
{ .compatible = "allwinner,sun4i-a10-ahci", },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match);
|
||||
|
||||
static struct platform_driver ahci_sunxi_driver = {
|
||||
.probe = ahci_sunxi_probe,
|
||||
.remove = ata_platform_remove_one,
|
||||
.driver = {
|
||||
.name = "ahci-sunxi",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = ahci_sunxi_of_match,
|
||||
.pm = &ahci_sunxi_pm_ops,
|
||||
},
|
||||
};
|
||||
module_platform_driver(ahci_sunxi_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver");
|
||||
MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user