leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

regulator: Updates for v5.4

Browse Source 
A small update for the regualtor API for this cycle, some small fixes
 and a bunch of new devices but none of them very big.  The most stand
 out thing is the regulator-fixed-clock driver which is for regulators
 where the enable control is done by using a clock instead of a GPIO or
 register write, a novel hardware design that had not previously come up.
 
  - Added a keyword pattern for regulator_get_optional() since usage of
    that API generally needs extra review.
  - Operating mode and suspend state support for act8865.
  - New device support for Active Semiconductor ACT8600 chargers,
    Mediatek MT6358, Qualcomm SM8150, regulator-fixed-clock, and
    Synoptics SY20276, SY20278 and SY8824E.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl1+wp8THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0GP2B/4ia4TBT2u5ZuxlyLfrsHoAJ1iVleYW
 D0s+Nsfou6lTrbJrIQgbVXsqbeBGhIBEYgfuyRJiy7CEwMssA7ltyyKbeBQ0U81W
 ywXniN1W5ChRGP770DI1Rez4qqDyIQegLC1afx1dXH4p7Be/Ttk69NQJscmpm9hC
 sXJ2tMoa2N1+nKeMEQvVsqegbdy8ddXNRIKnUnzV0HPkOTEVIwlTVR/gQXOtOpax
 UXx+mTeLQKplq9zditkRysuTWIsog1jC1kZRVu5goZ8+uudWK0SrVML4bWB6rPrJ
 d8moHJuwLHMipv+xLhI0bKGEYD4jnDqyGPJkJBuDSZTZ5EAJPaaiH923
 =a+m4
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A small update for the regualtor API for this cycle, some small fixes
  and a bunch of new devices but none of them very big.

  The most stand out thing is the regulator-fixed-clock driver which is
  for regulators where the enable control is done by using a clock
  instead of a GPIO or register write, a novel hardware design that had
  not previously come up.

  Summary:

   - Added a keyword pattern for regulator_get_optional() since usage of
     that API generally needs extra review.

   - Operating mode and suspend state support for act8865.

   - New device support for Active Semiconductor ACT8600 chargers,
     Mediatek MT6358, Qualcomm SM8150, regulator-fixed-clock, and
     Synoptics SY20276, SY20278 and SY8824E"

* tag 'regulator-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: core: Fix error return for /sys access
  regulator: da9211: fix obtaining "enable" GPIO
  regulator: max77686: fix obtaining "maxim,ena" GPIO
  regulator: uniphier: Add Pro5 USB3 VBUS support
  dt-bindings: regulator: add regulator-fixed-clock binding
  regulator: fixed: add possibility to enable by clock
  regulator: s2mps11: Consistently use local variable
  regulator: lp87565: Simplify lp87565_buck_set_ramp_delay
  regulator: slg51000: use devm_gpiod_get_optional() in probe
  regulator: lp8788-ldo: make array en_mask static const, makes object smaller
  regulator: tps65132: Stop parsing DT when gpio is not found
  regulator: Defer init completion for a while after late_initcall
  regulator: add missing 'static inline' to a helper's stub
  regulator: provide regulator_bulk_set_supply_names()
  MAINTAINERS: Add keyword pattern on regulator_get_optional()
  regulator: sy8824x: add prefixes to BUCK_EN and MODE macros
  regulator: sy8824x: use c++style for the comment block near SPDX
  regulator: mt6358: Add BROKEN dependency while waiting for MFD to merge
  regulator: mt6358: Add support for MT6358 regulator
  regulator: Add document for MT6358 regulator
  ...
This commit is contained in:
Linus Torvalds 2019-09-16 13:58:43 -07:00
commit c4d11ccb2b
35 changed files with 2024 additions and 82 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
Documentation/devicetree/bindings/regulator/act8865-regulator.txt
View File

@ -34,6 +34,9 @@ Optional input supply properties:
- inl67-supply: The input supply for LDO_REG3 and LDO_REG4
Any standard regulator properties can be used to configure the single regulator.
regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified
for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h
file.
The valid names for regulators are:
- for act8846:
@ -47,6 +50,8 @@ The valid names for regulators are:
Example:
--------
#include <dt-bindings/regulator/active-semi,8865-regulator.h>
i2c1: i2c@f0018000 {
pmic: act8865@5b {
compatible = "active-semi,act8865";
@ -65,9 +70,19 @@ Example:
regulator-name = "VCC_1V2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-suspend-mem-microvolt = <1150000>;
regulator-suspend-standby-microvolt = <1150000>;
regulator-always-on;
regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
<ACT8865_REGULATOR_MODE_LOWPOWER>;
regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-min-microvolt = <1150000>;
regulator-suspend-max-microvolt = <1150000>;
regulator-changeable-in-suspend;
regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
};
};
vcc_3v3_reg: DCDC_REG3 {
@ -82,6 +97,14 @@ Example:
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
<ACT8865_REGULATOR_MODE_LOWPOWER>;
regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vddfuse_reg: LDO_REG2 {

19
Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
View File

@ -19,9 +19,19 @@ description:
allOf:
- $ref: "regulator.yaml#"
if:
properties:
compatible:
contains:
const: regulator-fixed-clock
required:
- clocks
properties:
compatible:
const: regulator-fixed
enum:
- const: regulator-fixed
- const: regulator-fixed-clock
regulator-name: true
@ -29,6 +39,13 @@ properties:
description: gpio to use for enable control
maxItems: 1
clocks:
description:
clock to use for enable control. This binding is only available if
the compatible is chosen to regulator-fixed-clock. The clock binding
is mandatory if compatible is chosen to regulator-fixed-clock.
maxItems: 1
startup-delay-us:
description: startup time in microseconds
$ref: /schemas/types.yaml#/definitions/uint32

358
Documentation/devicetree/bindings/regulator/mt6358-regulator.txt Normal file
View File

@ -0,0 +1,358 @@
MediaTek MT6358 Regulator
All voltage regulators provided by the MT6358 PMIC are described as the
subnodes of the MT6358 regulators node. Each regulator is named according
to its regulator type, buck_<name> and ldo_<name>. The definition for each
of these nodes is defined using the standard binding for regulators at
Documentation/devicetree/bindings/regulator/regulator.txt.
The valid names for regulators are::
BUCK:
buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
buck_vs2, buck_vmodem, buck_vs1
LDO:
ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
ldo_vsim2
Example:
pmic {
compatible = "mediatek,mt6358";
mt6358regulator: mt6358regulator {
compatible = "mediatek,mt6358-regulator";
mt6358_vdram1_reg: buck_vdram1 {
regulator-compatible = "buck_vdram1";
regulator-name = "vdram1";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2087500>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <0>;
regulator-always-on;
};
mt6358_vcore_reg: buck_vcore {
regulator-name = "vcore";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
regulator-ramp-delay = <6250>;
regulator-enable-ramp-delay = <200>;
regulator-always-on;
};
mt6358_vpa_reg: buck_vpa {
regulator-name = "vpa";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3650000>;
regulator-ramp-delay = <50000>;
regulator-enable-ramp-delay = <250>;
};
mt6358_vproc11_reg: buck_vproc11 {
regulator-name = "vproc11";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
regulator-ramp-delay = <6250>;
regulator-enable-ramp-delay = <200>;
regulator-always-on;
};
mt6358_vproc12_reg: buck_vproc12 {
regulator-name = "vproc12";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
regulator-ramp-delay = <6250>;
regulator-enable-ramp-delay = <200>;
regulator-always-on;
};
mt6358_vgpu_reg: buck_vgpu {
regulator-name = "vgpu";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
regulator-ramp-delay = <6250>;
regulator-enable-ramp-delay = <200>;
};
mt6358_vs2_reg: buck_vs2 {
regulator-name = "vs2";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2087500>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <0>;
regulator-always-on;
};
mt6358_vmodem_reg: buck_vmodem {
regulator-name = "vmodem";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
regulator-ramp-delay = <6250>;
regulator-enable-ramp-delay = <900>;
regulator-always-on;
};
mt6358_vs1_reg: buck_vs1 {
regulator-name = "vs1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <2587500>;
regulator-ramp-delay = <12500>;
regulator-enable-ramp-delay = <0>;
regulator-always-on;
};
mt6358_vdram2_reg: ldo_vdram2 {
regulator-name = "vdram2";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <3300>;
};
mt6358_vsim1_reg: ldo_vsim1 {
regulator-name = "vsim1";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <3100000>;
regulator-enable-ramp-delay = <540>;
};
mt6358_vibr_reg: ldo_vibr {
regulator-name = "vibr";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <60>;
};
mt6358_vrf12_reg: ldo_vrf12 {
compatible = "regulator-fixed";
regulator-name = "vrf12";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-enable-ramp-delay = <120>;
};
mt6358_vio18_reg: ldo_vio18 {
compatible = "regulator-fixed";
regulator-name = "vio18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <2700>;
regulator-always-on;
};
mt6358_vusb_reg: ldo_vusb {
regulator-name = "vusb";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3100000>;
regulator-enable-ramp-delay = <270>;
regulator-always-on;
};
mt6358_vcamio_reg: ldo_vcamio {
compatible = "regulator-fixed";
regulator-name = "vcamio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vcamd_reg: ldo_vcamd {
regulator-name = "vcamd";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vcn18_reg: ldo_vcn18 {
compatible = "regulator-fixed";
regulator-name = "vcn18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vfe28_reg: ldo_vfe28 {
compatible = "regulator-fixed";
regulator-name = "vfe28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vsram_proc11_reg: ldo_vsram_proc11 {
regulator-name = "vsram_proc11";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
regulator-ramp-delay = <6250>;
regulator-enable-ramp-delay = <240>;
regulator-always-on;
};
mt6358_vcn28_reg: ldo_vcn28 {
compatible = "regulator-fixed";
regulator-name = "vcn28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vsram_others_reg: ldo_vsram_others {
regulator-name = "vsram_others";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
regulator-ramp-delay = <6250>;
regulator-enable-ramp-delay = <240>;
regulator-always-on;
};
mt6358_vsram_gpu_reg: ldo_vsram_gpu {
regulator-name = "vsram_gpu";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
regulator-ramp-delay = <6250>;
regulator-enable-ramp-delay = <240>;
};
mt6358_vxo22_reg: ldo_vxo22 {
compatible = "regulator-fixed";
regulator-name = "vxo22";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
regulator-enable-ramp-delay = <120>;
regulator-always-on;
};
mt6358_vefuse_reg: ldo_vefuse {
regulator-name = "vefuse";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vaux18_reg: ldo_vaux18 {
compatible = "regulator-fixed";
regulator-name = "vaux18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vmch_reg: ldo_vmch {
regulator-name = "vmch";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <60>;
};
mt6358_vbif28_reg: ldo_vbif28 {
compatible = "regulator-fixed";
regulator-name = "vbif28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vsram_proc12_reg: ldo_vsram_proc12 {
regulator-name = "vsram_proc12";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
regulator-ramp-delay = <6250>;
regulator-enable-ramp-delay = <240>;
regulator-always-on;
};
mt6358_vcama1_reg: ldo_vcama1 {
regulator-name = "vcama1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vemc_reg: ldo_vemc {
regulator-name = "vemc";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <60>;
regulator-always-on;
};
mt6358_vio28_reg: ldo_vio28 {
compatible = "regulator-fixed";
regulator-name = "vio28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_va12_reg: ldo_va12 {
compatible = "regulator-fixed";
regulator-name = "va12";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-enable-ramp-delay = <270>;
regulator-always-on;
};
mt6358_vrf18_reg: ldo_vrf18 {
compatible = "regulator-fixed";
regulator-name = "vrf18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <120>;
};
mt6358_vcn33_bt_reg: ldo_vcn33_bt {
regulator-name = "vcn33_bt";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3500000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
regulator-name = "vcn33_wifi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3500000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vcama2_reg: ldo_vcama2 {
regulator-name = "vcama2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vmc_reg: ldo_vmc {
regulator-name = "vmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <60>;
};
mt6358_vldo28_reg: ldo_vldo28 {
regulator-name = "vldo28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vaud28_reg: ldo_vaud28 {
compatible = "regulator-fixed";
regulator-name = "vaud28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-enable-ramp-delay = <270>;
};
mt6358_vsim2_reg: ldo_vsim2 {
regulator-name = "vsim2";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <3100000>;
regulator-enable-ramp-delay = <540>;
};
};
};

15
Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
View File

@ -22,9 +22,12 @@ RPMh resource.
The names used for regulator nodes must match those supported by a given PMIC.
Supported regulator node names:
PM8005: smps1 - smps4
PM8009: smps1 - smps2, ldo1 - ldo7
PM8150: smps1 - smps10, ldo1 - ldo18
PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
PMI8998: bob
PM8005: smps1 - smps4
========================
First Level Nodes - PMIC
@ -33,9 +36,13 @@ First Level Nodes - PMIC
- compatible
Usage: required
Value type: <string>
Definition: Must be one of: "qcom,pm8998-rpmh-regulators",
"qcom,pmi8998-rpmh-regulators" or
"qcom,pm8005-rpmh-regulators".
Definition: Must be one of below:
"qcom,pm8005-rpmh-regulators"
"qcom,pm8009-rpmh-regulators"
"qcom,pm8150-rpmh-regulators"
"qcom,pm8150l-rpmh-regulators"
"qcom,pm8998-rpmh-regulators"
"qcom,pmi8998-rpmh-regulators"
- qcom,pmic-id
Usage: required

24
Documentation/devicetree/bindings/regulator/sy8824x.txt Normal file
View File

@ -0,0 +1,24 @@
SY8824C/SY8824E/SY20276 Voltage regulator
Required properties:
- compatible: Must be one of the following.
"silergy,sy8824c"
"silergy,sy8824e"
"silergy,sy20276"
"silergy,sy20278"
- reg: I2C slave address
Any property defined as part of the core regulator binding, defined in
./regulator.txt, can also be used.
Example:
vcore: regulator@00 {
compatible = "silergy,sy8824c";
reg = <0x66>;
regulator-name = "vcore";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};

7
Documentation/devicetree/bindings/regulator/twl-regulator.txt
View File

@ -71,3 +71,10 @@ Example:
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
};
For twl6030 regulators/LDOs:
- ti,retain-on-reset: Does not turn off the supplies during warm
reset. Could be needed for VMMC, as TWL6030
reset sequence for this signal does not comply
with the SD specification.

5
Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
View File

@ -13,6 +13,7 @@ this layer. These clocks and resets should be described in each property.
Required properties:
- compatible: Should be
"socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
"socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
"socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
"socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
"socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
@ -20,12 +21,12 @@ Required properties:
- clocks: A list of phandles to the clock gate for USB3 glue layer.
According to the clock-names, appropriate clocks are required.
- clock-names: Should contain
"gio", "link" - for Pro4 SoC
"gio", "link" - for Pro4 and Pro5 SoCs
"link" - for others
- resets: A list of phandles to the reset control for USB3 glue layer.
According to the reset-names, appropriate resets are required.
- reset-names: Should contain
"gio", "link" - for Pro4 SoC
"gio", "link" - for Pro4 and Pro5 SoCs
"link" - for others
See Documentation/devicetree/bindings/regulator/regulator.txt

1
MAINTAINERS
View File

@ -17261,6 +17261,7 @@ F: Documentation/power/regulator/
F: drivers/regulator/
F: include/dt-bindings/regulator/
F: include/linux/regulator/
K: regulator_get_optional
VRF
M: David Ahern <dsa@cumulusnetworks.com>

17
drivers/regulator/Kconfig
View File

@ -83,6 +83,7 @@ config REGULATOR_88PM8607
config REGULATOR_ACT8865
tristate "Active-semi act8865 voltage regulator"
depends on I2C
depends on POWER_SUPPLY
select REGMAP_I2C
help
This driver controls a active-semi act8865 voltage output
@ -618,6 +619,15 @@ config REGULATOR_MT6323
This driver supports the control of different power rails of device
through regulator interface.
config REGULATOR_MT6358
tristate "MediaTek MT6358 PMIC"
depends on MFD_MT6397 && BROKEN
help
Say y here to select this option to enable the power regulator of
MediaTek MT6358 PMIC.
This driver supports the control of different power rails of device
through regulator interface.
config REGULATOR_MT6380
tristate "MediaTek MT6380 PMIC"
depends on MTK_PMIC_WRAP
@ -906,6 +916,13 @@ config REGULATOR_SY8106A
help
This driver supports SY8106A single output regulator.
config REGULATOR_SY8824X
tristate "Silergy SY8824C/SY8824E regulator"
depends on I2C && (OF || COMPILE_TEST)
select REGMAP_I2C
help
This driver supports SY8824C single output regulator.
config REGULATOR_TPS51632
tristate "TI TPS51632 Power Regulator"
depends on I2C

2
drivers/regulator/Makefile
View File

@ -79,6 +79,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
@ -111,6 +112,7 @@ obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o
obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o

316
drivers/regulator/act8865-regulator.c
View File

@ -16,8 +16,10 @@
#include <linux/regulator/act8865.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/power_supply.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
#include <dt-bindings/regulator/active-semi,8865-regulator.h>
/*
* ACT8600 Global Register Map.
@ -89,35 +91,50 @@
*/
#define ACT8865_SYS_MODE 0x00
#define ACT8865_SYS_CTRL 0x01
#define ACT8865_SYS_UNLK_REGS 0x0b
#define ACT8865_DCDC1_VSET1 0x20
#define ACT8865_DCDC1_VSET2 0x21
#define ACT8865_DCDC1_CTRL 0x22
#define ACT8865_DCDC1_SUS 0x24
#define ACT8865_DCDC2_VSET1 0x30
#define ACT8865_DCDC2_VSET2 0x31
#define ACT8865_DCDC2_CTRL 0x32
#define ACT8865_DCDC2_SUS 0x34
#define ACT8865_DCDC3_VSET1 0x40
#define ACT8865_DCDC3_VSET2 0x41
#define ACT8865_DCDC3_CTRL 0x42
#define ACT8865_DCDC3_SUS 0x44
#define ACT8865_LDO1_VSET 0x50
#define ACT8865_LDO1_CTRL 0x51
#define ACT8865_LDO1_SUS 0x52
#define ACT8865_LDO2_VSET 0x54
#define ACT8865_LDO2_CTRL 0x55
#define ACT8865_LDO2_SUS 0x56
#define ACT8865_LDO3_VSET 0x60
#define ACT8865_LDO3_CTRL 0x61
#define ACT8865_LDO3_SUS 0x62
#define ACT8865_LDO4_VSET 0x64
#define ACT8865_LDO4_CTRL 0x65
#define ACT8865_LDO4_SUS 0x66
#define ACT8865_MSTROFF 0x20
/*
* Field Definitions.
*/
#define ACT8865_ENA 0x80 /* ON - [7] */
#define ACT8865_DIS 0x40 /* DIS - [6] */
#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
#define ACT8600_LDO10_ENA 0x40 /* ON - [6] */
#define ACT8600_SUDCDC_VSEL_MASK 0xFF /* SUDCDC VSET - [7:0] */
#define ACT8600_APCH_CHG_ACIN BIT(7)
#define ACT8600_APCH_CHG_USB BIT(6)
#define ACT8600_APCH_CSTATE0 BIT(5)
#define ACT8600_APCH_CSTATE1 BIT(4)
/*
* ACT8865 voltage number
*/
@ -217,6 +234,171 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
};
static int act8865_set_suspend_state(struct regulator_dev *rdev, bool enable)
{
struct regmap *regmap = rdev->regmap;
int id = rdev->desc->id, reg, val;
switch (id) {
case ACT8865_ID_DCDC1:
reg = ACT8865_DCDC1_SUS;
val = 0xa8;
break;
case ACT8865_ID_DCDC2:
reg = ACT8865_DCDC2_SUS;
val = 0xa8;
break;
case ACT8865_ID_DCDC3:
reg = ACT8865_DCDC3_SUS;
val = 0xa8;
break;
case ACT8865_ID_LDO1:
reg = ACT8865_LDO1_SUS;
val = 0xe8;
break;
case ACT8865_ID_LDO2:
reg = ACT8865_LDO2_SUS;
val = 0xe8;
break;
case ACT8865_ID_LDO3:
reg = ACT8865_LDO3_SUS;
val = 0xe8;
break;
case ACT8865_ID_LDO4:
reg = ACT8865_LDO4_SUS;
val = 0xe8;
break;
default:
return -EINVAL;
}
if (enable)
val |= BIT(4);
/*
* Ask the PMIC to enable/disable this output when entering hibernate
* mode.
*/
return regmap_write(regmap, reg, val);
}
static int act8865_set_suspend_enable(struct regulator_dev *rdev)
{
return act8865_set_suspend_state(rdev, true);
}
static int act8865_set_suspend_disable(struct regulator_dev *rdev)
{
return act8865_set_suspend_state(rdev, false);
}
static unsigned int act8865_of_map_mode(unsigned int mode)
{
switch (mode) {
case ACT8865_REGULATOR_MODE_FIXED:
return REGULATOR_MODE_FAST;
case ACT8865_REGULATOR_MODE_NORMAL:
return REGULATOR_MODE_NORMAL;
case ACT8865_REGULATOR_MODE_LOWPOWER:
return REGULATOR_MODE_STANDBY;
default:
return REGULATOR_MODE_INVALID;
}
}
static int act8865_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct regmap *regmap = rdev->regmap;
int id = rdev_get_id(rdev);
int reg, val = 0;
switch (id) {
case ACT8865_ID_DCDC1:
reg = ACT8865_DCDC1_CTRL;
break;
case ACT8865_ID_DCDC2:
reg = ACT8865_DCDC2_CTRL;
break;
case ACT8865_ID_DCDC3:
reg = ACT8865_DCDC3_CTRL;
break;
case ACT8865_ID_LDO1:
reg = ACT8865_LDO1_CTRL;
break;
case ACT8865_ID_LDO2:
reg = ACT8865_LDO2_CTRL;
break;
case ACT8865_ID_LDO3:
reg = ACT8865_LDO3_CTRL;
break;
case ACT8865_ID_LDO4:
reg = ACT8865_LDO4_CTRL;
break;
default:
return -EINVAL;
}
switch (mode) {
case REGULATOR_MODE_FAST:
case REGULATOR_MODE_NORMAL:
if (id <= ACT8865_ID_DCDC3)
val = BIT(5);
break;
case REGULATOR_MODE_STANDBY:
if (id > ACT8865_ID_DCDC3)
val = BIT(5);
break;
default:
return -EINVAL;
}
return regmap_update_bits(regmap, reg, BIT(5), val);
}
static unsigned int act8865_get_mode(struct regulator_dev *rdev)
{
struct regmap *regmap = rdev->regmap;
int id = rdev_get_id(rdev);
int reg, ret, val = 0;
switch (id) {
case ACT8865_ID_DCDC1:
reg = ACT8865_DCDC1_CTRL;
break;
case ACT8865_ID_DCDC2:
reg = ACT8865_DCDC2_CTRL;
break;
case ACT8865_ID_DCDC3:
reg = ACT8865_DCDC3_CTRL;
break;
case ACT8865_ID_LDO1:
reg = ACT8865_LDO1_CTRL;
break;
case ACT8865_ID_LDO2:
reg = ACT8865_LDO2_CTRL;
break;
case ACT8865_ID_LDO3:
reg = ACT8865_LDO3_CTRL;
break;
case ACT8865_ID_LDO4:
reg = ACT8865_LDO4_CTRL;
break;
default:
return -EINVAL;
}
ret = regmap_read(regmap, reg, &val);
if (ret)
return ret;
if (id <= ACT8865_ID_DCDC3 && (val & BIT(5)))
return REGULATOR_MODE_FAST;
else if (id > ACT8865_ID_DCDC3 && !(val & BIT(5)))
return REGULATOR_MODE_NORMAL;
else
return REGULATOR_MODE_STANDBY;
}
static const struct regulator_ops act8865_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
@ -224,24 +406,44 @@ static const struct regulator_ops act8865_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_mode = act8865_set_mode,
.get_mode = act8865_get_mode,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = act8865_set_suspend_enable,
.set_suspend_disable = act8865_set_suspend_disable,
};
static const struct regulator_ops act8865_ldo_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_mode = act8865_set_mode,
.get_mode = act8865_get_mode,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = act8865_set_suspend_enable,
.set_suspend_disable = act8865_set_suspend_disable,
.set_pull_down = regulator_set_pull_down_regmap,
};
static const struct regulator_ops act8865_fixed_ldo_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
#define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply) \
#define ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, _ops) \
[_family##_ID_##_id] = { \
.name = _name, \
.of_match = of_match_ptr(_name), \
.of_map_mode = act8865_of_map_mode, \
.regulators_node = of_match_ptr("regulators"), \
.supply_name = _supply, \
.id = _family##_ID_##_id, \
.type = REGULATOR_VOLTAGE, \
.ops = &act8865_ops, \
.ops = _ops, \
.n_voltages = ACT8865_VOLTAGE_NUM, \
.linear_ranges = act8865_voltage_ranges, \
.n_linear_ranges = ARRAY_SIZE(act8865_voltage_ranges), \
@ -249,9 +451,17 @@ static const struct regulator_ops act8865_ldo_ops = {
.vsel_mask = ACT8865_VSEL_MASK, \
.enable_reg = _family##_##_id##_CTRL, \
.enable_mask = ACT8865_ENA, \
.pull_down_reg = _family##_##_id##_CTRL, \
.pull_down_mask = ACT8865_DIS, \
.owner = THIS_MODULE, \
}
#define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply) \
ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ops)
#define ACT88xx_LDO(_name, _family, _id, _vsel_reg, _supply) \
ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ldo_ops)
static const struct regulator_desc act8600_regulators[] = {
ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET, "vp1"),
ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET, "vp2"),
@ -281,7 +491,7 @@ static const struct regulator_desc act8600_regulators[] = {
.of_match = of_match_ptr("LDO_REG9"),
.regulators_node = of_match_ptr("regulators"),
.id = ACT8600_ID_LDO9,
.ops = &act8865_ldo_ops,
.ops = &act8865_fixed_ldo_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.fixed_uV = 3300000,
@ -294,7 +504,7 @@ static const struct regulator_desc act8600_regulators[] = {
.of_match = of_match_ptr("LDO_REG10"),
.regulators_node = of_match_ptr("regulators"),
.id = ACT8600_ID_LDO10,
.ops = &act8865_ldo_ops,
.ops = &act8865_fixed_ldo_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.fixed_uV = 1200000,
@ -323,20 +533,20 @@ static const struct regulator_desc act8865_regulators[] = {
ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1, "vp1"),
ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1, "vp2"),
ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1, "vp3"),
ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
};
static const struct regulator_desc act8865_alt_regulators[] = {
ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"),
ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"),
ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"),
ACT88xx_REG("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
ACT88xx_REG("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
ACT88xx_REG("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
ACT88xx_REG("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
};
#ifdef CONFIG_OF
@ -372,6 +582,75 @@ static void act8865_power_off(void)
while (1);
}
static int act8600_charger_get_status(struct regmap *map)
{
unsigned int val;
int ret;
u8 state0, state1;
ret = regmap_read(map, ACT8600_APCH_STAT, &val);
if (ret < 0)
return ret;
state0 = val & ACT8600_APCH_CSTATE0;
state1 = val & ACT8600_APCH_CSTATE1;
if (state0 && !state1)
return POWER_SUPPLY_STATUS_CHARGING;
if (!state0 && state1)
return POWER_SUPPLY_STATUS_NOT_CHARGING;
if (!state0 && !state1)
return POWER_SUPPLY_STATUS_DISCHARGING;
return POWER_SUPPLY_STATUS_UNKNOWN;
}
static int act8600_charger_get_property(struct power_supply *psy,
enum power_supply_property psp, union power_supply_propval *val)
{
struct regmap *map = power_supply_get_drvdata(psy);
int ret;
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
ret = act8600_charger_get_status(map);
if (ret < 0)
return ret;
val->intval = ret;
break;
default:
return -EINVAL;
}
return 0;
}
static enum power_supply_property act8600_charger_properties[] = {
POWER_SUPPLY_PROP_STATUS,
};
static const struct power_supply_desc act8600_charger_desc = {
.name = "act8600-charger",
.type = POWER_SUPPLY_TYPE_BATTERY,
.properties = act8600_charger_properties,
.num_properties = ARRAY_SIZE(act8600_charger_properties),
.get_property = act8600_charger_get_property,
};
static int act8600_charger_probe(struct device *dev, struct regmap *regmap)
{
struct power_supply *charger;
struct power_supply_config cfg = {
.drv_data = regmap,
.of_node = dev->of_node,
};
charger = devm_power_supply_register(dev, &act8600_charger_desc, &cfg);
return PTR_ERR_OR_ZERO(charger);
}
static int act8865_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
@ -483,9 +762,20 @@ static int act8865_pmic_probe(struct i2c_client *client,
}
}
if (type == ACT8600) {
ret = act8600_charger_probe(dev, act8865->regmap);
if (ret < 0) {
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to probe charger");
return ret;
}
}
i2c_set_clientdata(client, act8865);
return 0;
/* Unlock expert registers for ACT8865. */
return type != ACT8865 ? 0 : regmap_write(act8865->regmap,
ACT8865_SYS_UNLK_REGS, 0xef);
}
static const struct i2c_device_id act8865_ids[] = {

58
drivers/regulator/core.c
View File

@ -381,12 +381,16 @@ static struct device_node *of_get_child_regulator(struct device_node *parent,
if (!regnode) {
regnode = of_get_child_regulator(child, prop_name);
if (regnode)
return regnode;
goto err_node_put;
} else {
return regnode;
goto err_node_put;
}
}
return NULL;
err_node_put:
of_node_put(child);
return regnode;
}
/**
@ -564,13 +568,15 @@ static ssize_t regulator_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
ssize_t ret;
int uV;
regulator_lock(rdev);
ret = sprintf(buf, "%d\n", regulator_get_voltage_rdev(rdev));
uV = regulator_get_voltage_rdev(rdev);
regulator_unlock(rdev);
return ret;
if (uV < 0)
return uV;
return sprintf(buf, "%d\n", uV);
}
static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);
@ -5640,7 +5646,7 @@ static int __init regulator_init(void)
/* init early to allow our consumers to complete system booting */
core_initcall(regulator_init);
static int __init regulator_late_cleanup(struct device *dev, void *data)
static int regulator_late_cleanup(struct device *dev, void *data)
{
struct regulator_dev *rdev = dev_to_rdev(dev);
const struct regulator_ops *ops = rdev->desc->ops;
@ -5689,17 +5695,8 @@ unlock:
return 0;
}
static int __init regulator_init_complete(void)
static void regulator_init_complete_work_function(struct work_struct *work)
{
/*
* Since DT doesn't provide an idiomatic mechanism for
* enabling full constraints and since it's much more natural
* with DT to provide them just assume that a DT enabled
* system has full constraints.
*/
if (of_have_populated_dt())
has_full_constraints = true;
/*
* Regulators may had failed to resolve their input supplies
* when were registered, either because the input supply was
@ -5717,6 +5714,35 @@ static int __init regulator_init_complete(void)
*/
class_for_each_device(&regulator_class, NULL, NULL,
regulator_late_cleanup);
}
static DECLARE_DELAYED_WORK(regulator_init_complete_work,
regulator_init_complete_work_function);
static int __init regulator_init_complete(void)
{
/*
* Since DT doesn't provide an idiomatic mechanism for
* enabling full constraints and since it's much more natural
* with DT to provide them just assume that a DT enabled
* system has full constraints.
*/
if (of_have_populated_dt())
has_full_constraints = true;
/*
* We punt completion for an arbitrary amount of time since
* systems like distros will load many drivers from userspace
* so consumers might not always be ready yet, this is
* particularly an issue with laptops where this might bounce
* the display off then on. Ideally we'd get a notification
* from userspace when this happens but we don't so just wait
* a bit and hope we waited long enough. It'd be better if
* we'd only do this on systems that need it, and a kernel
* command line option might be useful.
*/
schedule_delayed_work(&regulator_init_complete_work,
msecs_to_jiffies(30000));
return 0;
}

4
drivers/regulator/da9062-regulator.c
View File

@ -1032,10 +1032,8 @@ static int da9062_regulator_probe(struct platform_device *pdev)
/* LDOs overcurrent event support */
irq = platform_get_irq_byname(pdev, "LDO_LIM");
if (irq < 0) {
dev_err(&pdev->dev, "Failed to get IRQ.\n");
if (irq < 0)
return irq;
}
regulators->irq_ldo_lim = irq;
ret = devm_request_threaded_irq(&pdev->dev, irq,

4
drivers/regulator/da9063-regulator.c
View File

@ -863,10 +863,8 @@ static int da9063_regulator_probe(struct platform_device *pdev)
/* LDOs overcurrent event support */
irq = platform_get_irq_byname(pdev, "LDO_LIM");
if (irq < 0) {
dev_err(&pdev->dev, "Failed to get IRQ.\n");
if (irq < 0)
return irq;
}
ret = devm_request_threaded_irq(&pdev->dev, irq,
NULL, da9063_ldo_lim_event,

2
drivers/regulator/da9211-regulator.c
View File

@ -285,7 +285,7 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
pdata->reg_node[n] = da9211_matches[i].of_node;
pdata->gpiod_ren[n] = devm_gpiod_get_from_of_node(dev,
da9211_matches[i].of_node,
"enable",
"enable-gpios",
0,
GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
"da9211-enable");

83
drivers/regulator/fixed.c
View File

@ -23,14 +23,63 @@
#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/machine.h>
#include <linux/clk.h>
struct fixed_voltage_data {
struct regulator_desc desc;
struct regulator_dev *dev;
struct clk *enable_clock;
unsigned int clk_enable_counter;
};
struct fixed_dev_type {
bool has_enable_clock;
};
static const struct fixed_dev_type fixed_voltage_data = {
.has_enable_clock = false,
};
static const struct fixed_dev_type fixed_clkenable_data = {
.has_enable_clock = true,
};
static int reg_clock_enable(struct regulator_dev *rdev)
{
struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
int ret = 0;
ret = clk_prepare_enable(priv->enable_clock);
if (ret)
return ret;
priv->clk_enable_counter++;
return ret;
}
static int reg_clock_disable(struct regulator_dev *rdev)
{
struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
clk_disable_unprepare(priv->enable_clock);
priv->clk_enable_counter--;
return 0;
}
static int reg_clock_is_enabled(struct regulator_dev *rdev)
{
struct fixed_voltage_data *priv = rdev_get_drvdata(rdev);
return priv->clk_enable_counter > 0;
}
/**
* of_get_fixed_voltage_config - extract fixed_voltage_config structure info
@ -84,10 +133,19 @@ of_get_fixed_voltage_config(struct device *dev,
static struct regulator_ops fixed_voltage_ops = {
};
static struct regulator_ops fixed_voltage_clkenabled_ops = {
.enable = reg_clock_enable,
.disable = reg_clock_disable,
.is_enabled = reg_clock_is_enabled,
};
static int reg_fixed_voltage_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct fixed_voltage_config *config;
struct fixed_voltage_data *drvdata;
const struct fixed_dev_type *drvtype =
of_match_device(dev->driver->of_match_table, dev)->data;
struct regulator_config cfg = { };
enum gpiod_flags gflags;
int ret;
@ -118,7 +176,18 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
}
drvdata->desc.type = REGULATOR_VOLTAGE;
drvdata->desc.owner = THIS_MODULE;
drvdata->desc.ops = &fixed_voltage_ops;
if (drvtype->has_enable_clock) {
drvdata->desc.ops = &fixed_voltage_clkenabled_ops;
drvdata->enable_clock = devm_clk_get(dev, NULL);
if (IS_ERR(drvdata->enable_clock)) {
dev_err(dev, "Cant get enable-clock from devicetree\n");
return -ENOENT;
}
} else {
drvdata->desc.ops = &fixed_voltage_ops;
}
drvdata->desc.enable_time = config->startup_delay;
@ -191,8 +260,16 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
#if defined(CONFIG_OF)
static const struct of_device_id fixed_of_match[] = {
{ .compatible = "regulator-fixed", },
{},
{
.compatible = "regulator-fixed",
.data = &fixed_voltage_data,
},
{
.compatible = "regulator-fixed-clock",
.data = &fixed_clkenable_data,
},
{
},
};
MODULE_DEVICE_TABLE(of, fixed_of_match);
#endif

21
drivers/regulator/helpers.c
View File

@ -860,3 +860,24 @@ int regulator_get_current_limit_regmap(struct regulator_dev *rdev)
return -EINVAL;
}
EXPORT_SYMBOL_GPL(regulator_get_current_limit_regmap);
/**
* regulator_bulk_set_supply_names - initialize the 'supply' fields in an array
* of regulator_bulk_data structs
*
* @consumers: array of regulator_bulk_data entries to initialize
* @supply_names: array of supply name strings
* @num_supplies: number of supply names to initialize
*
* Note: the 'consumers' array must be the size of 'num_supplies'.
*/
void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
const char *const *supply_names,
unsigned int num_supplies)
{
unsigned int i;
for (i = 0; i < num_supplies; i++)
consumers[i].supply = supply_names[i];
}
EXPORT_SYMBOL_GPL(regulator_bulk_set_supply_names);

10
drivers/regulator/lm363x-regulator.c
View File

@ -30,13 +30,13 @@
/* LM3632 */
#define LM3632_BOOST_VSEL_MAX 0x26
#define LM3632_LDO_VSEL_MAX 0x29
#define LM3632_LDO_VSEL_MAX 0x28
#define LM3632_VBOOST_MIN 4500000
#define LM3632_VLDO_MIN 4000000
/* LM36274 */
#define LM36274_BOOST_VSEL_MAX 0x3f
#define LM36274_LDO_VSEL_MAX 0x34
#define LM36274_LDO_VSEL_MAX 0x32
#define LM36274_VOLTAGE_MIN 4000000
/* Common */
@ -226,7 +226,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
.of_match = "vboost",
.id = LM36274_BOOST,
.ops = &lm363x_boost_voltage_table_ops,
.n_voltages = LM36274_BOOST_VSEL_MAX,
.n_voltages = LM36274_BOOST_VSEL_MAX + 1,
.min_uV = LM36274_VOLTAGE_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
@ -239,7 +239,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
.of_match = "vpos",
.id = LM36274_LDO_POS,
.ops = &lm363x_regulator_voltage_table_ops,
.n_voltages = LM36274_LDO_VSEL_MAX,
.n_voltages = LM36274_LDO_VSEL_MAX + 1,
.min_uV = LM36274_VOLTAGE_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
@ -254,7 +254,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
.of_match = "vneg",
.id = LM36274_LDO_NEG,
.ops = &lm363x_regulator_voltage_table_ops,
.n_voltages = LM36274_LDO_VSEL_MAX,
.n_voltages = LM36274_LDO_VSEL_MAX + 1,
.min_uV = LM36274_VOLTAGE_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,

5
drivers/regulator/lp87565-regulator.c
View File

@ -65,7 +65,6 @@ static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
int ramp_delay)
{
int id = rdev_get_id(rdev);
struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
unsigned int reg;
int ret;
@ -86,11 +85,11 @@ static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
else
reg = 0;
ret = regmap_update_bits(lp87565->regmap, regulators[id].ctrl2_reg,
ret = regmap_update_bits(rdev->regmap, regulators[id].ctrl2_reg,
LP87565_BUCK_CTRL_2_SLEW_RATE,
reg << __ffs(LP87565_BUCK_CTRL_2_SLEW_RATE));
if (ret) {
dev_err(lp87565->dev, "SLEW RATE write failed: %d\n", ret);
dev_err(&rdev->dev, "SLEW RATE write failed: %d\n", ret);
return ret;
}

2
drivers/regulator/lp8788-ldo.c
View File

@ -464,7 +464,7 @@ static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
{
struct lp8788 *lp = ldo->lp;
enum lp8788_ext_ldo_en_id enable_id;
u8 en_mask[] = {
static const u8 en_mask[] = {
[EN_ALDO1] = LP8788_EN_SEL_ALDO1_M,
[EN_ALDO234] = LP8788_EN_SEL_ALDO234_M,
[EN_ALDO5] = LP8788_EN_SEL_ALDO5_M,

2
drivers/regulator/max77686-regulator.c
View File

@ -257,7 +257,7 @@ static int max77686_of_parse_cb(struct device_node *np,
case MAX77686_BUCK9:
case MAX77686_LDO20 ... MAX77686_LDO22:
config->ena_gpiod = gpiod_get_from_of_node(np,
"maxim,ena",
"maxim,ena-gpios",
0,
GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
"max77686-regulator");

1
drivers/regulator/max8660.c
View File

@ -485,7 +485,6 @@ static int max8660_probe(struct i2c_client *client,
rdev = devm_regulator_register(&client->dev,
&max8660_reg[id], &config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(&client->dev, "failed to register %s\n",
max8660_reg[id].name);
return PTR_ERR(rdev);

549
drivers/regulator/mt6358-regulator.c Normal file
View File

@ -0,0 +1,549 @@
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (c) 2019 MediaTek Inc.
#include <linux/mfd/mt6358/registers.h>
#include <linux/mfd/mt6397/core.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/mt6358-regulator.h>
#include <linux/regulator/of_regulator.h>
#define MT6358_BUCK_MODE_AUTO 0
#define MT6358_BUCK_MODE_FORCE_PWM 1
/*
* MT6358 regulators' information
*
* @desc: standard fields of regulator description.
* @qi: Mask for query enable signal status of regulators
*/
struct mt6358_regulator_info {
struct regulator_desc desc;
u32 status_reg;
u32 qi;
const u32 *index_table;
unsigned int n_table;
u32 vsel_shift;
u32 da_vsel_reg;
u32 da_vsel_mask;
u32 da_vsel_shift;
u32 modeset_reg;
u32 modeset_mask;
u32 modeset_shift;
};
#define MT6358_BUCK(match, vreg, min, max, step, \
volt_ranges, vosel_mask, _da_vsel_reg, _da_vsel_mask, \
_da_vsel_shift, _modeset_reg, _modeset_shift) \
[MT6358_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
.of_match = of_match_ptr(match), \
.ops = &mt6358_volt_range_ops, \
.type = REGULATOR_VOLTAGE, \
.id = MT6358_ID_##vreg, \
.owner = THIS_MODULE, \
.n_voltages = ((max) - (min)) / (step) + 1, \
.linear_ranges = volt_ranges, \
.n_linear_ranges = ARRAY_SIZE(volt_ranges), \
.vsel_reg = MT6358_BUCK_##vreg##_ELR0, \
.vsel_mask = vosel_mask, \
.enable_reg = MT6358_BUCK_##vreg##_CON0, \
.enable_mask = BIT(0), \
.of_map_mode = mt6358_map_mode, \
}, \
.status_reg = MT6358_BUCK_##vreg##_DBG1, \
.qi = BIT(0), \
.da_vsel_reg = _da_vsel_reg, \
.da_vsel_mask = _da_vsel_mask, \
.da_vsel_shift = _da_vsel_shift, \
.modeset_reg = _modeset_reg, \
.modeset_mask = BIT(_modeset_shift), \
.modeset_shift = _modeset_shift \
}
#define MT6358_LDO(match, vreg, ldo_volt_table, \
ldo_index_table, enreg, enbit, vosel, \
vosel_mask, vosel_shift) \
[MT6358_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
.of_match = of_match_ptr(match), \
.ops = &mt6358_volt_table_ops, \
.type = REGULATOR_VOLTAGE, \
.id = MT6358_ID_##vreg, \
.owner = THIS_MODULE, \
.n_voltages = ARRAY_SIZE(ldo_volt_table), \
.volt_table = ldo_volt_table, \
.vsel_reg = vosel, \
.vsel_mask = vosel_mask, \
.enable_reg = enreg, \
.enable_mask = BIT(enbit), \
}, \
.status_reg = MT6358_LDO_##vreg##_CON1, \
.qi = BIT(15), \
.index_table = ldo_index_table, \
.n_table = ARRAY_SIZE(ldo_index_table), \
.vsel_shift = vosel_shift, \
}
#define MT6358_LDO1(match, vreg, min, max, step, \
volt_ranges, _da_vsel_reg, _da_vsel_mask, \
_da_vsel_shift, vosel, vosel_mask) \
[MT6358_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
.of_match = of_match_ptr(match), \
.ops = &mt6358_volt_range_ops, \
.type = REGULATOR_VOLTAGE, \
.id = MT6358_ID_##vreg, \
.owner = THIS_MODULE, \
.n_voltages = ((max) - (min)) / (step) + 1, \
.linear_ranges = volt_ranges, \
.n_linear_ranges = ARRAY_SIZE(volt_ranges), \
.vsel_reg = vosel, \
.vsel_mask = vosel_mask, \
.enable_reg = MT6358_LDO_##vreg##_CON0, \
.enable_mask = BIT(0), \
}, \
.da_vsel_reg = _da_vsel_reg, \
.da_vsel_mask = _da_vsel_mask, \
.da_vsel_shift = _da_vsel_shift, \
.status_reg = MT6358_LDO_##vreg##_DBG1, \
.qi = BIT(0), \
}
#define MT6358_REG_FIXED(match, vreg, \
enreg, enbit, volt) \
[MT6358_ID_##vreg] = { \
.desc = { \
.name = #vreg, \
.of_match = of_match_ptr(match), \
.ops = &mt6358_volt_fixed_ops, \
.type = REGULATOR_VOLTAGE, \
.id = MT6358_ID_##vreg, \
.owner = THIS_MODULE, \
.n_voltages = 1, \
.enable_reg = enreg, \
.enable_mask = BIT(enbit), \
.min_uV = volt, \
}, \
.status_reg = MT6358_LDO_##vreg##_CON1, \
.qi = BIT(15), \
}
static const struct regulator_linear_range buck_volt_range1[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
};
static const struct regulator_linear_range buck_volt_range2[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 12500),
};
static const struct regulator_linear_range buck_volt_range3[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
};
static const struct regulator_linear_range buck_volt_range4[] = {
REGULATOR_LINEAR_RANGE(1000000, 0, 0x7f, 12500),
};
static const u32 vdram2_voltages[] = {
600000, 1800000,
};
static const u32 vsim_voltages[] = {
1700000, 1800000, 2700000, 3000000, 3100000,
};
static const u32 vibr_voltages[] = {
1200000, 1300000, 1500000, 1800000,
2000000, 2800000, 3000000, 3300000,
};
static const u32 vusb_voltages[] = {
3000000, 3100000,
};
static const u32 vcamd_voltages[] = {
900000, 1000000, 1100000, 1200000,
1300000, 1500000, 1800000,
};
static const u32 vefuse_voltages[] = {
1700000, 1800000, 1900000,
};
static const u32 vmch_vemc_voltages[] = {
2900000, 3000000, 3300000,
};
static const u32 vcama_voltages[] = {
1800000, 2500000, 2700000,
2800000, 2900000, 3000000,
};
static const u32 vcn33_bt_wifi_voltages[] = {
3300000, 3400000, 3500000,
};
static const u32 vmc_voltages[] = {
1800000, 2900000, 3000000, 3300000,
};
static const u32 vldo28_voltages[] = {
2800000, 3000000,
};
static const u32 vdram2_idx[] = {
0, 12,
};
static const u32 vsim_idx[] = {
3, 4, 8, 11, 12,
};
static const u32 vibr_idx[] = {
0, 1, 2, 4, 5, 9, 11, 13,
};
static const u32 vusb_idx[] = {
3, 4,
};
static const u32 vcamd_idx[] = {
3, 4, 5, 6, 7, 9, 12,
};
static const u32 vefuse_idx[] = {
11, 12, 13,
};
static const u32 vmch_vemc_idx[] = {
2, 3, 5,
};
static const u32 vcama_idx[] = {
0, 7, 9, 10, 11, 12,
};
static const u32 vcn33_bt_wifi_idx[] = {
1, 2, 3,
};
static const u32 vmc_idx[] = {
4, 10, 11, 13,
};
static const u32 vldo28_idx[] = {
1, 3,
};
static unsigned int mt6358_map_mode(unsigned int mode)
{
return mode == MT6358_BUCK_MODE_AUTO ?
REGULATOR_MODE_NORMAL : REGULATOR_MODE_FAST;
}
static int mt6358_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
int idx, ret;
const u32 *pvol;
struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
pvol = info->index_table;
idx = pvol[selector];
ret = regmap_update_bits(rdev->regmap, info->desc.vsel_reg,
info->desc.vsel_mask,
idx << info->vsel_shift);
return ret;
}
static int mt6358_get_voltage_sel(struct regulator_dev *rdev)
{
int idx, ret;
u32 selector;
struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
const u32 *pvol;
ret = regmap_read(rdev->regmap, info->desc.vsel_reg, &selector);
if (ret != 0) {
dev_info(&rdev->dev,
"Failed to get mt6358 %s vsel reg: %d\n",
info->desc.name, ret);
return ret;
}
selector = (selector & info->desc.vsel_mask) >> info->vsel_shift;
pvol = info->index_table;
for (idx = 0; idx < info->desc.n_voltages; idx++) {
if (pvol[idx] == selector)
return idx;
}
return -EINVAL;
}
static int mt6358_get_buck_voltage_sel(struct regulator_dev *rdev)
{
int ret, regval;
struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
ret = regmap_read(rdev->regmap, info->da_vsel_reg, &regval);
if (ret != 0) {
dev_err(&rdev->dev,
"Failed to get mt6358 Buck %s vsel reg: %d\n",
info->desc.name, ret);
return ret;
}
ret = (regval >> info->da_vsel_shift) & info->da_vsel_mask;
return ret;
}
static int mt6358_get_status(struct regulator_dev *rdev)
{
int ret;
u32 regval;
struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
ret = regmap_read(rdev->regmap, info->status_reg, &regval);
if (ret != 0) {
dev_info(&rdev->dev, "Failed to get enable reg: %d\n", ret);
return ret;
}
return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
}
static int mt6358_regulator_set_mode(struct regulator_dev *rdev,
unsigned int mode)
{
struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
int val;
switch (mode) {
case REGULATOR_MODE_FAST:
val = MT6358_BUCK_MODE_FORCE_PWM;
break;
case REGULATOR_MODE_NORMAL:
val = MT6358_BUCK_MODE_AUTO;
break;
default:
return -EINVAL;
}
dev_dbg(&rdev->dev, "mt6358 buck set_mode %#x, %#x, %#x, %#x\n",
info->modeset_reg, info->modeset_mask,
info->modeset_shift, val);
val <<= info->modeset_shift;
return regmap_update_bits(rdev->regmap, info->modeset_reg,
info->modeset_mask, val);
}
static unsigned int mt6358_regulator_get_mode(struct regulator_dev *rdev)
{
struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
int ret, regval;
ret = regmap_read(rdev->regmap, info->modeset_reg, &regval);
if (ret != 0) {
dev_err(&rdev->dev,
"Failed to get mt6358 buck mode: %d\n", ret);
return ret;
}
switch ((regval & info->modeset_mask) >> info->modeset_shift) {
case MT6358_BUCK_MODE_AUTO:
return REGULATOR_MODE_NORMAL;
case MT6358_BUCK_MODE_FORCE_PWM:
return REGULATOR_MODE_FAST;
default:
return -EINVAL;
}
}
static const struct regulator_ops mt6358_volt_range_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = mt6358_get_buck_voltage_sel,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.get_status = mt6358_get_status,
.set_mode = mt6358_regulator_set_mode,
.get_mode = mt6358_regulator_get_mode,
};
static const struct regulator_ops mt6358_volt_table_ops = {
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_iterate,
.set_voltage_sel = mt6358_set_voltage_sel,
.get_voltage_sel = mt6358_get_voltage_sel,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.get_status = mt6358_get_status,
};
static const struct regulator_ops mt6358_volt_fixed_ops = {
.list_voltage = regulator_list_voltage_linear,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.get_status = mt6358_get_status,
};
/* The array is indexed by id(MT6358_ID_XXX) */
static struct mt6358_regulator_info mt6358_regulators[] = {
MT6358_BUCK("buck_vdram1", VDRAM1, 500000, 2087500, 12500,
buck_volt_range2, 0x7f, MT6358_BUCK_VDRAM1_DBG0, 0x7f,
0, MT6358_VDRAM1_ANA_CON0, 8),
MT6358_BUCK("buck_vcore", VCORE, 500000, 1293750, 6250,
buck_volt_range1, 0x7f, MT6358_BUCK_VCORE_DBG0, 0x7f,
0, MT6358_VCORE_VGPU_ANA_CON0, 1),
MT6358_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
buck_volt_range3, 0x3f, MT6358_BUCK_VPA_DBG0, 0x3f, 0,
MT6358_VPA_ANA_CON0, 3),
MT6358_BUCK("buck_vproc11", VPROC11, 500000, 1293750, 6250,
buck_volt_range1, 0x7f, MT6358_BUCK_VPROC11_DBG0, 0x7f,
0, MT6358_VPROC_ANA_CON0, 1),
MT6358_BUCK("buck_vproc12", VPROC12, 500000, 1293750, 6250,
buck_volt_range1, 0x7f, MT6358_BUCK_VPROC12_DBG0, 0x7f,
0, MT6358_VPROC_ANA_CON0, 2),
MT6358_BUCK("buck_vgpu", VGPU, 500000, 1293750, 6250,
buck_volt_range1, 0x7f, MT6358_BUCK_VGPU_ELR0, 0x7f, 0,
MT6358_VCORE_VGPU_ANA_CON0, 2),
MT6358_BUCK("buck_vs2", VS2, 500000, 2087500, 12500,
buck_volt_range2, 0x7f, MT6358_BUCK_VS2_DBG0, 0x7f, 0,
MT6358_VS2_ANA_CON0, 8),
MT6358_BUCK("buck_vmodem", VMODEM, 500000, 1293750, 6250,
buck_volt_range1, 0x7f, MT6358_BUCK_VMODEM_DBG0, 0x7f,
0, MT6358_VMODEM_ANA_CON0, 8),
MT6358_BUCK("buck_vs1", VS1, 1000000, 2587500, 12500,
buck_volt_range4, 0x7f, MT6358_BUCK_VS1_DBG0, 0x7f, 0,
MT6358_VS1_ANA_CON0, 8),
MT6358_REG_FIXED("ldo_vrf12", VRF12,
MT6358_LDO_VRF12_CON0, 0, 1200000),
MT6358_REG_FIXED("ldo_vio18", VIO18,
MT6358_LDO_VIO18_CON0, 0, 1800000),
MT6358_REG_FIXED("ldo_vcamio", VCAMIO,
MT6358_LDO_VCAMIO_CON0, 0, 1800000),
MT6358_REG_FIXED("ldo_vcn18", VCN18, MT6358_LDO_VCN18_CON0, 0, 1800000),
MT6358_REG_FIXED("ldo_vfe28", VFE28, MT6358_LDO_VFE28_CON0, 0, 2800000),
MT6358_REG_FIXED("ldo_vcn28", VCN28, MT6358_LDO_VCN28_CON0, 0, 2800000),
MT6358_REG_FIXED("ldo_vxo22", VXO22, MT6358_LDO_VXO22_CON0, 0, 2200000),
MT6358_REG_FIXED("ldo_vaux18", VAUX18,
MT6358_LDO_VAUX18_CON0, 0, 1800000),
MT6358_REG_FIXED("ldo_vbif28", VBIF28,
MT6358_LDO_VBIF28_CON0, 0, 2800000),
MT6358_REG_FIXED("ldo_vio28", VIO28, MT6358_LDO_VIO28_CON0, 0, 2800000),
MT6358_REG_FIXED("ldo_va12", VA12, MT6358_LDO_VA12_CON0, 0, 1200000),
MT6358_REG_FIXED("ldo_vrf18", VRF18, MT6358_LDO_VRF18_CON0, 0, 1800000),
MT6358_REG_FIXED("ldo_vaud28", VAUD28,
MT6358_LDO_VAUD28_CON0, 0, 2800000),
MT6358_LDO("ldo_vdram2", VDRAM2, vdram2_voltages, vdram2_idx,
MT6358_LDO_VDRAM2_CON0, 0, MT6358_LDO_VDRAM2_ELR0, 0x10, 0),
MT6358_LDO("ldo_vsim1", VSIM1, vsim_voltages, vsim_idx,
MT6358_LDO_VSIM1_CON0, 0, MT6358_VSIM1_ANA_CON0, 0xf00, 8),
MT6358_LDO("ldo_vibr", VIBR, vibr_voltages, vibr_idx,
MT6358_LDO_VIBR_CON0, 0, MT6358_VIBR_ANA_CON0, 0xf00, 8),
MT6358_LDO("ldo_vusb", VUSB, vusb_voltages, vusb_idx,
MT6358_LDO_VUSB_CON0_0, 0, MT6358_VUSB_ANA_CON0, 0x700, 8),
MT6358_LDO("ldo_vcamd", VCAMD, vcamd_voltages, vcamd_idx,
MT6358_LDO_VCAMD_CON0, 0, MT6358_VCAMD_ANA_CON0, 0xf00, 8),
MT6358_LDO("ldo_vefuse", VEFUSE, vefuse_voltages, vefuse_idx,
MT6358_LDO_VEFUSE_CON0, 0, MT6358_VEFUSE_ANA_CON0, 0xf00, 8),
MT6358_LDO("ldo_vmch", VMCH, vmch_vemc_voltages, vmch_vemc_idx,
MT6358_LDO_VMCH_CON0, 0, MT6358_VMCH_ANA_CON0, 0x700, 8),
MT6358_LDO("ldo_vcama1", VCAMA1, vcama_voltages, vcama_idx,
MT6358_LDO_VCAMA1_CON0, 0, MT6358_VCAMA1_ANA_CON0, 0xf00, 8),
MT6358_LDO("ldo_vemc", VEMC, vmch_vemc_voltages, vmch_vemc_idx,
MT6358_LDO_VEMC_CON0, 0, MT6358_VEMC_ANA_CON0, 0x700, 8),
MT6358_LDO("ldo_vcn33_bt", VCN33_BT, vcn33_bt_wifi_voltages,
vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_0,
0, MT6358_VCN33_ANA_CON0, 0x300, 8),
MT6358_LDO("ldo_vcn33_wifi", VCN33_WIFI, vcn33_bt_wifi_voltages,
vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_1,
0, MT6358_VCN33_ANA_CON0, 0x300, 8),
MT6358_LDO("ldo_vcama2", VCAMA2, vcama_voltages, vcama_idx,
MT6358_LDO_VCAMA2_CON0, 0, MT6358_VCAMA2_ANA_CON0, 0xf00, 8),
MT6358_LDO("ldo_vmc", VMC, vmc_voltages, vmc_idx,
MT6358_LDO_VMC_CON0, 0, MT6358_VMC_ANA_CON0, 0xf00, 8),
MT6358_LDO("ldo_vldo28", VLDO28, vldo28_voltages, vldo28_idx,
MT6358_LDO_VLDO28_CON0_0, 0,
MT6358_VLDO28_ANA_CON0, 0x300, 8),
MT6358_LDO("ldo_vsim2", VSIM2, vsim_voltages, vsim_idx,
MT6358_LDO_VSIM2_CON0, 0, MT6358_VSIM2_ANA_CON0, 0xf00, 8),
MT6358_LDO1("ldo_vsram_proc11", VSRAM_PROC11, 500000, 1293750, 6250,
buck_volt_range1, MT6358_LDO_VSRAM_PROC11_DBG0, 0x7f, 8,
MT6358_LDO_VSRAM_CON0, 0x7f),
MT6358_LDO1("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750, 6250,
buck_volt_range1, MT6358_LDO_VSRAM_OTHERS_DBG0, 0x7f, 8,
MT6358_LDO_VSRAM_CON2, 0x7f),
MT6358_LDO1("ldo_vsram_gpu", VSRAM_GPU, 500000, 1293750, 6250,
buck_volt_range1, MT6358_LDO_VSRAM_GPU_DBG0, 0x7f, 8,
MT6358_LDO_VSRAM_CON3, 0x7f),
MT6358_LDO1("ldo_vsram_proc12", VSRAM_PROC12, 500000, 1293750, 6250,
buck_volt_range1, MT6358_LDO_VSRAM_PROC12_DBG0, 0x7f, 8,
MT6358_LDO_VSRAM_CON1, 0x7f),
};
static int mt6358_regulator_probe(struct platform_device *pdev)
{
struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = {};
struct regulator_dev *rdev;
int i;
for (i = 0; i < MT6358_MAX_REGULATOR; i++) {
config.dev = &pdev->dev;
config.driver_data = &mt6358_regulators[i];
config.regmap = mt6397->regmap;
rdev = devm_regulator_register(&pdev->dev,
&mt6358_regulators[i].desc,
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register %s\n",
mt6358_regulators[i].desc.name);
return PTR_ERR(rdev);
}
}
return 0;
}
static const struct platform_device_id mt6358_platform_ids[] = {
{"mt6358-regulator", 0},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(platform, mt6358_platform_ids);
static struct platform_driver mt6358_regulator_driver = {
.driver = {
.name = "mt6358-regulator",
},
.probe = mt6358_regulator_probe,
.id_table = mt6358_platform_ids,
};
module_platform_driver(mt6358_regulator_driver);
MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6358 PMIC");
MODULE_LICENSE("GPL");

193
drivers/regulator/qcom-rpmh-regulator.c
View File

@ -50,6 +50,20 @@ enum rpmh_regulator_type {
#define PMIC4_BOB_MODE_AUTO 2
#define PMIC4_BOB_MODE_PWM 3
#define PMIC5_LDO_MODE_RETENTION 3
#define PMIC5_LDO_MODE_LPM 4
#define PMIC5_LDO_MODE_HPM 7
#define PMIC5_SMPS_MODE_RETENTION 3
#define PMIC5_SMPS_MODE_PFM 4
#define PMIC5_SMPS_MODE_AUTO 6
#define PMIC5_SMPS_MODE_PWM 7
#define PMIC5_BOB_MODE_PASS 2
#define PMIC5_BOB_MODE_PFM 4
#define PMIC5_BOB_MODE_AUTO 6
#define PMIC5_BOB_MODE_PWM 7
/**
* struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
* @regulator_type: RPMh accelerator type used to manage this
@ -488,6 +502,14 @@ static const int pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = {
[REGULATOR_MODE_FAST] = -EINVAL,
};
static const int pmic_mode_map_pmic5_ldo[REGULATOR_MODE_STANDBY + 1] = {
[REGULATOR_MODE_INVALID] = -EINVAL,
[REGULATOR_MODE_STANDBY] = PMIC5_LDO_MODE_RETENTION,
[REGULATOR_MODE_IDLE] = PMIC5_LDO_MODE_LPM,
[REGULATOR_MODE_NORMAL] = PMIC5_LDO_MODE_HPM,
[REGULATOR_MODE_FAST] = -EINVAL,
};
static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode)
{
unsigned int mode;
@ -518,6 +540,14 @@ static const int pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = {
[REGULATOR_MODE_FAST] = PMIC4_SMPS_MODE_PWM,
};
static const int pmic_mode_map_pmic5_smps[REGULATOR_MODE_STANDBY + 1] = {
[REGULATOR_MODE_INVALID] = -EINVAL,
[REGULATOR_MODE_STANDBY] = PMIC5_SMPS_MODE_RETENTION,
[REGULATOR_MODE_IDLE] = PMIC5_SMPS_MODE_PFM,
[REGULATOR_MODE_NORMAL] = PMIC5_SMPS_MODE_AUTO,
[REGULATOR_MODE_FAST] = PMIC5_SMPS_MODE_PWM,
};
static unsigned int
rpmh_regulator_pmic4_smps_of_map_mode(unsigned int rpmh_mode)
{
@ -552,6 +582,14 @@ static const int pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = {
[REGULATOR_MODE_FAST] = PMIC4_BOB_MODE_PWM,
};
static const int pmic_mode_map_pmic5_bob[REGULATOR_MODE_STANDBY + 1] = {
[REGULATOR_MODE_INVALID] = -EINVAL,
[REGULATOR_MODE_STANDBY] = -EINVAL,
[REGULATOR_MODE_IDLE] = PMIC5_BOB_MODE_PFM,
[REGULATOR_MODE_NORMAL] = PMIC5_BOB_MODE_AUTO,
[REGULATOR_MODE_FAST] = PMIC5_BOB_MODE_PWM,
};
static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode)
{
unsigned int mode;
@ -637,6 +675,72 @@ static const struct rpmh_vreg_hw_data pmic4_lvs = {
/* LVS hardware does not support voltage or mode configuration. */
};
static const struct rpmh_vreg_hw_data pmic5_pldo = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_drms_ops,
.voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 255, 8000),
.n_voltages = 256,
.hpm_min_load_uA = 10000,
.pmic_mode_map = pmic_mode_map_pmic5_ldo,
.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
};
static const struct rpmh_vreg_hw_data pmic5_pldo_lv = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_drms_ops,
.voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 62, 8000),
.n_voltages = 63,
.hpm_min_load_uA = 10000,
.pmic_mode_map = pmic_mode_map_pmic5_ldo,
.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
};
static const struct rpmh_vreg_hw_data pmic5_nldo = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_drms_ops,
.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 123, 8000),
.n_voltages = 124,
.hpm_min_load_uA = 30000,
.pmic_mode_map = pmic_mode_map_pmic5_ldo,
.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
};
static const struct rpmh_vreg_hw_data pmic5_hfsmps510 = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_ops,
.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
.n_voltages = 216,
.pmic_mode_map = pmic_mode_map_pmic5_smps,
.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
};
static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_ops,
.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 263, 4000),
.n_voltages = 264,
.pmic_mode_map = pmic_mode_map_pmic5_smps,
.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
};
static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_ops,
.voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 1600),
.n_voltages = 5,
.pmic_mode_map = pmic_mode_map_pmic5_smps,
.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
};
static const struct rpmh_vreg_hw_data pmic5_bob = {
.regulator_type = VRM,
.ops = &rpmh_regulator_vrm_bypass_ops,
.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
.n_voltages = 136,
.pmic_mode_map = pmic_mode_map_pmic5_bob,
.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
};
#define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
{ \
.name = _name, \
@ -705,6 +809,75 @@ static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
{},
};
static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
RPMH_VREG("smps4", "smp%s4", &pmic5_hfsmps510, "vdd-s4"),
RPMH_VREG("smps5", "smp%s5", &pmic5_hfsmps510, "vdd-s5"),
RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"),
RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps510, "vdd-s8"),
RPMH_VREG("smps9", "smp%s9", &pmic5_ftsmps510, "vdd-s9"),
RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l8-l11"),
RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l10"),
RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6-l9"),
RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-l12-l14-l15"),
RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l1-l8-l11"),
RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l6-l9"),
RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l2-l10"),
RPMH_VREG("ldo11", "ldo%s11", &pmic5_nldo, "vdd-l1-l8-l11"),
RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l7-l12-l14-l15"),
RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l13-l6-l17"),
RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo_lv, "vdd-l7-l12-l14-l15"),
RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo_lv, "vdd-l7-l12-l14-l15"),
RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l13-l6-l17"),
RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l13-l6-l17"),
RPMH_VREG("ldo18", "ldo%s18", &pmic5_nldo, "vdd-l3-l4-l5-l18"),
{},
};
static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"),
RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"),
RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"),
RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"),
RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"),
RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"),
RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"),
RPMH_VREG("smps8", "smp%s8", &pmic5_hfsmps510, "vdd-s8"),
RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo_lv, "vdd-l1-l8"),
RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2-l3"),
RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l2-l3"),
RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l4-l5-l6"),
RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l4-l5-l6"),
RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l4-l5-l6"),
RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-l11"),
RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l1-l8-l11"),
RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l9-l10"),
RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l9-l10"),
RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l7-l11"),
RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"),
{},
};
static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515, "vdd-s2"),
RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"),
RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"),
RPMH_VREG("ldo7", "ldo%s6", &pmic5_pldo_lv, "vdd-l7"),
{},
};
static int rpmh_regulator_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@ -743,6 +916,22 @@ static int rpmh_regulator_probe(struct platform_device *pdev)
}
static const struct of_device_id rpmh_regulator_match_table[] = {
{
.compatible = "qcom,pm8005-rpmh-regulators",
.data = pm8005_vreg_data,
},
{
.compatible = "qcom,pm8009-rpmh-regulators",
.data = pm8009_vreg_data,
},
{
.compatible = "qcom,pm8150-rpmh-regulators",
.data = pm8150_vreg_data,
},
{
.compatible = "qcom,pm8150l-rpmh-regulators",
.data = pm8150l_vreg_data,
},
{
.compatible = "qcom,pm8998-rpmh-regulators",
.data = pm8998_vreg_data,
@ -751,10 +940,6 @@ static const struct of_device_id rpmh_regulator_match_table[] = {
.compatible = "qcom,pmi8998-rpmh-regulators",
.data = pmi8998_vreg_data,
},
{
.compatible = "qcom,pm8005-rpmh-regulators",
.data = pm8005_vreg_data,
},
{}
};
MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);

2
drivers/regulator/rk808-regulator.c
View File

@ -606,7 +606,7 @@ static unsigned int rk8xx_regulator_of_map_mode(unsigned int mode)
case 2:
return REGULATOR_MODE_NORMAL;
default:
return -EINVAL;
return REGULATOR_MODE_INVALID;
}
}

2
drivers/regulator/s2mps11.c
View File

@ -1226,7 +1226,7 @@ common_reg:
goto out;
}
if (s2mps11->ext_control_gpiod[i]) {
if (config.ena_gpiod) {
ret = s2mps14_pmic_enable_ext_control(s2mps11,
regulator);
if (ret < 0) {

15
drivers/regulator/slg51000-regulator.c
View File

@ -447,19 +447,20 @@ static int slg51000_i2c_probe(struct i2c_client *client,
{
struct device *dev = &client->dev;
struct slg51000 *chip;
struct gpio_desc *cs_gpiod = NULL;
struct gpio_desc *cs_gpiod;
int error, ret;
chip = devm_kzalloc(dev, sizeof(struct slg51000), GFP_KERNEL);
if (!chip)
return -ENOMEM;
cs_gpiod = devm_gpiod_get_from_of_node(dev, dev->of_node,
"dlg,cs-gpios", 0,
GPIOD_OUT_HIGH
| GPIOD_FLAGS_BIT_NONEXCLUSIVE,
"slg51000-cs");
if (!IS_ERR(cs_gpiod)) {
cs_gpiod = devm_gpiod_get_optional(dev, "dlg,cs",
GPIOD_OUT_HIGH |
GPIOD_FLAGS_BIT_NONEXCLUSIVE);
if (IS_ERR(cs_gpiod))
return PTR_ERR(cs_gpiod);
if (cs_gpiod) {
dev_info(dev, "Found chip selector property\n");
chip->cs_gpiod = cs_gpiod;
}

4
drivers/regulator/stm32-booster.c
View File

@ -20,7 +20,6 @@
#define STM32MP1_SYSCFG_EN_BOOSTER_MASK BIT(8)
static const struct regulator_ops stm32h7_booster_ops = {
.list_voltage = regulator_list_voltage_linear,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@ -31,7 +30,6 @@ static const struct regulator_desc stm32h7_booster_desc = {
.supply_name = "vdda",
.n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.min_uV = 3300000,
.fixed_uV = 3300000,
.ramp_delay = 66000, /* up to 50us to stabilize */
.ops = &stm32h7_booster_ops,
@ -53,7 +51,6 @@ static int stm32mp1_booster_disable(struct regulator_dev *rdev)
}
static const struct regulator_ops stm32mp1_booster_ops = {
.list_voltage = regulator_list_voltage_linear,
.enable = stm32mp1_booster_enable,
.disable = stm32mp1_booster_disable,
.is_enabled = regulator_is_enabled_regmap,
@ -64,7 +61,6 @@ static const struct regulator_desc stm32mp1_booster_desc = {
.supply_name = "vdda",
.n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.min_uV = 3300000,
.fixed_uV = 3300000,
.ramp_delay = 66000,
.ops = &stm32mp1_booster_ops,

232
drivers/regulator/sy8824x.c Normal file
View File

@ -0,0 +1,232 @@
// SPDX-License-Identifier: GPL-2.0
//
// SY8824C/SY8824E regulator driver
//
// Copyright (C) 2019 Synaptics Incorporated
//
// Author: Jisheng Zhang <jszhang@kernel.org>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#define SY8824C_BUCK_EN (1 << 7)
#define SY8824C_MODE (1 << 6)
struct sy8824_config {
/* registers */
unsigned int vol_reg;
unsigned int mode_reg;
unsigned int enable_reg;
/* Voltage range and step(linear) */
unsigned int vsel_min;
unsigned int vsel_step;
unsigned int vsel_count;
};
struct sy8824_device_info {
struct device *dev;
struct regulator_desc desc;
struct regulator_init_data *regulator;
const struct sy8824_config *cfg;
};
static int sy8824_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct sy8824_device_info *di = rdev_get_drvdata(rdev);
const struct sy8824_config *cfg = di->cfg;
switch (mode) {
case REGULATOR_MODE_FAST:
regmap_update_bits(rdev->regmap, cfg->mode_reg,
SY8824C_MODE, SY8824C_MODE);
break;
case REGULATOR_MODE_NORMAL:
regmap_update_bits(rdev->regmap, cfg->mode_reg,
SY8824C_MODE, 0);
break;
default:
return -EINVAL;
}
return 0;
}
static unsigned int sy8824_get_mode(struct regulator_dev *rdev)
{
struct sy8824_device_info *di = rdev_get_drvdata(rdev);
const struct sy8824_config *cfg = di->cfg;
u32 val;
int ret = 0;
ret = regmap_read(rdev->regmap, cfg->mode_reg, &val);
if (ret < 0)
return ret;
if (val & SY8824C_MODE)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
}
static const struct regulator_ops sy8824_regulator_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.map_voltage = regulator_map_voltage_linear,
.list_voltage = regulator_list_voltage_linear,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_mode = sy8824_set_mode,
.get_mode = sy8824_get_mode,
};
static int sy8824_regulator_register(struct sy8824_device_info *di,
struct regulator_config *config)
{
struct regulator_desc *rdesc = &di->desc;
const struct sy8824_config *cfg = di->cfg;
struct regulator_dev *rdev;
rdesc->name = "sy8824-reg";
rdesc->supply_name = "vin";
rdesc->ops = &sy8824_regulator_ops;
rdesc->type = REGULATOR_VOLTAGE;
rdesc->n_voltages = cfg->vsel_count;
rdesc->enable_reg = cfg->enable_reg;
rdesc->enable_mask = SY8824C_BUCK_EN;
rdesc->min_uV = cfg->vsel_min;
rdesc->uV_step = cfg->vsel_step;
rdesc->vsel_reg = cfg->vol_reg;
rdesc->vsel_mask = cfg->vsel_count - 1;
rdesc->owner = THIS_MODULE;
rdev = devm_regulator_register(di->dev, &di->desc, config);
return PTR_ERR_OR_ZERO(rdev);
}
static const struct regmap_config sy8824_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static int sy8824_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct device_node *np = dev->of_node;
struct sy8824_device_info *di;
struct regulator_config config = { };
struct regmap *regmap;
int ret;
di = devm_kzalloc(dev, sizeof(struct sy8824_device_info), GFP_KERNEL);
if (!di)
return -ENOMEM;
di->regulator = of_get_regulator_init_data(dev, np, &di->desc);
if (!di->regulator) {
dev_err(dev, "Platform data not found!\n");
return -EINVAL;
}
di->dev = dev;
di->cfg = of_device_get_match_data(dev);
regmap = devm_regmap_init_i2c(client, &sy8824_regmap_config);
if (IS_ERR(regmap)) {
dev_err(dev, "Failed to allocate regmap!\n");
return PTR_ERR(regmap);
}
i2c_set_clientdata(client, di);
config.dev = di->dev;
config.init_data = di->regulator;
config.regmap = regmap;
config.driver_data = di;
config.of_node = np;
ret = sy8824_regulator_register(di, &config);
if (ret < 0)
dev_err(dev, "Failed to register regulator!\n");
return ret;
}
static const struct sy8824_config sy8824c_cfg = {
.vol_reg = 0x00,
.mode_reg = 0x00,
.enable_reg = 0x00,
.vsel_min = 762500,
.vsel_step = 12500,
.vsel_count = 64,
};
static const struct sy8824_config sy8824e_cfg = {
.vol_reg = 0x00,
.mode_reg = 0x00,
.enable_reg = 0x00,
.vsel_min = 700000,
.vsel_step = 12500,
.vsel_count = 64,
};
static const struct sy8824_config sy20276_cfg = {
.vol_reg = 0x00,
.mode_reg = 0x01,
.enable_reg = 0x01,
.vsel_min = 600000,
.vsel_step = 10000,
.vsel_count = 128,
};
static const struct sy8824_config sy20278_cfg = {
.vol_reg = 0x00,
.mode_reg = 0x01,
.enable_reg = 0x01,
.vsel_min = 762500,
.vsel_step = 12500,
.vsel_count = 64,
};
static const struct of_device_id sy8824_dt_ids[] = {
{
.compatible = "silergy,sy8824c",
.data = &sy8824c_cfg
},
{
.compatible = "silergy,sy8824e",
.data = &sy8824e_cfg
},
{
.compatible = "silergy,sy20276",
.data = &sy20276_cfg
},
{
.compatible = "silergy,sy20278",
.data = &sy20278_cfg
},
{ }
};
MODULE_DEVICE_TABLE(of, sy8824_dt_ids);
static const struct i2c_device_id sy8824_id[] = {
{ "sy8824", },
{ },
};
MODULE_DEVICE_TABLE(i2c, sy8824_id);
static struct i2c_driver sy8824_regulator_driver = {
.driver = {
.name = "sy8824-regulator",
.of_match_table = of_match_ptr(sy8824_dt_ids),
},
.probe = sy8824_i2c_probe,
.id_table = sy8824_id,
};
module_i2c_driver(sy8824_regulator_driver);
MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
MODULE_DESCRIPTION("SY8824C/SY8824E regulator driver");
MODULE_LICENSE("GPL v2");

4
drivers/regulator/tps65132-regulator.c
View File

@ -138,7 +138,7 @@ static int tps65132_of_parse_cb(struct device_node *np,
rpdata->en_gpiod = devm_fwnode_get_index_gpiod_from_child(tps->dev,
"enable", 0, &np->fwnode, 0, "enable");
if (IS_ERR(rpdata->en_gpiod)) {
if (IS_ERR_OR_NULL(rpdata->en_gpiod)) {
ret = PTR_ERR(rpdata->en_gpiod);
/* Ignore the error other than probe defer */
@ -150,7 +150,7 @@ static int tps65132_of_parse_cb(struct device_node *np,
rpdata->act_dis_gpiod = devm_fwnode_get_index_gpiod_from_child(
tps->dev, "active-discharge", 0,
&np->fwnode, 0, "active-discharge");
if (IS_ERR(rpdata->act_dis_gpiod)) {
if (IS_ERR_OR_NULL(rpdata->act_dis_gpiod)) {
ret = PTR_ERR(rpdata->act_dis_gpiod);
/* Ignore the error other than probe defer */

21
drivers/regulator/twl6030-regulator.c
View File

@ -57,6 +57,9 @@ struct twlreg_info {
#define VREG_BC_PROC 3
#define VREG_BC_CLK_RST 4
/* TWL6030 LDO register values for VREG_VOLTAGE */
#define TWL6030_VREG_VOLTAGE_WR_S BIT(7)
/* TWL6030 LDO register values for CFG_STATE */
#define TWL6030_CFG_STATE_OFF 0x00
#define TWL6030_CFG_STATE_ON 0x01
@ -68,9 +71,10 @@ struct twlreg_info {
#define TWL6030_CFG_STATE_APP(v) (((v) & TWL6030_CFG_STATE_APP_MASK) >>\
TWL6030_CFG_STATE_APP_SHIFT)
/* Flags for SMPS Voltage reading */
/* Flags for SMPS Voltage reading and LDO reading*/
#define SMPS_OFFSET_EN BIT(0)
#define SMPS_EXTENDED_EN BIT(1)
#define TWL_6030_WARM_RESET BIT(3)
/* twl6032 SMPS EPROM values */
#define TWL6030_SMPS_OFFSET 0xB0
@ -250,6 +254,9 @@ twl6030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
if (info->flags & TWL_6030_WARM_RESET)
selector |= TWL6030_VREG_VOLTAGE_WR_S;
return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE,
selector);
}
@ -259,6 +266,9 @@ static int twl6030ldo_get_voltage_sel(struct regulator_dev *rdev)
struct twlreg_info *info = rdev_get_drvdata(rdev);
int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE);
if (info->flags & TWL_6030_WARM_RESET)
vsel &= ~TWL6030_VREG_VOLTAGE_WR_S;
return vsel;
}
@ -665,14 +675,14 @@ static int twlreg_probe(struct platform_device *pdev)
struct regulation_constraints *c;
struct regulator_dev *rdev;
struct regulator_config config = { };
struct device_node *np = pdev->dev.of_node;
template = of_device_get_match_data(&pdev->dev);
if (!template)
return -ENODEV;
id = template->desc.id;
initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
&template->desc);
initdata = of_get_regulator_init_data(&pdev->dev, np, &template->desc);
if (!initdata)
return -EINVAL;
@ -710,10 +720,13 @@ static int twlreg_probe(struct platform_device *pdev)
break;
}
if (of_get_property(np, "ti,retain-on-reset", NULL))
info->flags |= TWL_6030_WARM_RESET;
config.dev = &pdev->dev;
config.init_data = initdata;
config.driver_data = info;
config.of_node = pdev->dev.of_node;
config.of_node = np;
rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
if (IS_ERR(rdev)) {

4
drivers/regulator/uniphier-regulator.c
View File

@ -185,6 +185,10 @@ static const struct of_device_id uniphier_regulator_match[] = {
.compatible = "socionext,uniphier-pro4-usb3-regulator",
.data = &uniphier_pro4_usb3_data,
},
{
.compatible = "socionext,uniphier-pro5-usb3-regulator",
.data = &uniphier_pro4_usb3_data,
},
{
.compatible = "socionext,uniphier-pxs2-usb3-regulator",
.data = &uniphier_pxs2_usb3_data,

28
include/dt-bindings/regulator/active-semi,8865-regulator.h Normal file
View File

@ -0,0 +1,28 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Device Tree binding constants for the ACT8865 PMIC regulators
*/
#ifndef _DT_BINDINGS_REGULATOR_ACT8865_H
#define _DT_BINDINGS_REGULATOR_ACT8865_H
/*
* These constants should be used to specify regulator modes in device tree for
* ACT8865 regulators as follows:
* ACT8865_REGULATOR_MODE_FIXED: It is specific to DCDC regulators and it
* specifies the usage of fixed-frequency
* PWM.
*
* ACT8865_REGULATOR_MODE_NORMAL: It is specific to LDO regulators and it
* specifies the usage of normal mode.
*
* ACT8865_REGULATOR_MODE_LOWPOWER: For DCDC and LDO regulators; it specify
* the usage of proprietary power-saving
* mode.
*/
#define ACT8865_REGULATOR_MODE_FIXED 1
#define ACT8865_REGULATOR_MODE_NORMAL 2
#define ACT8865_REGULATOR_MODE_LOWPOWER 3
#endif

13
include/linux/regulator/consumer.h
View File

@ -281,6 +281,12 @@ void devm_regulator_unregister_notifier(struct regulator *regulator,
void *regulator_get_drvdata(struct regulator *regulator);
void regulator_set_drvdata(struct regulator *regulator, void *data);
/* misc helpers */
void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
const char *const *supply_names,
unsigned int num_supplies);
#else
/*
@ -580,6 +586,13 @@ static inline int regulator_list_voltage(struct regulator *regulator, unsigned s
return -EINVAL;
}
static inline void
regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
const char *const *supply_names,
unsigned int num_supplies)
{
}
#endif
static inline int regulator_set_voltage_triplet(struct regulator *regulator,

56
include/linux/regulator/mt6358-regulator.h Normal file
View File

@ -0,0 +1,56 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2019 MediaTek Inc.
*/
#ifndef __LINUX_REGULATOR_MT6358_H
#define __LINUX_REGULATOR_MT6358_H
enum {
MT6358_ID_VDRAM1 = 0,
MT6358_ID_VCORE,
MT6358_ID_VPA,
MT6358_ID_VPROC11,
MT6358_ID_VPROC12,
MT6358_ID_VGPU,
MT6358_ID_VS2,
MT6358_ID_VMODEM,
MT6358_ID_VS1,
MT6358_ID_VDRAM2 = 9,
MT6358_ID_VSIM1,
MT6358_ID_VIBR,
MT6358_ID_VRF12,
MT6358_ID_VIO18,
MT6358_ID_VUSB,
MT6358_ID_VCAMIO,
MT6358_ID_VCAMD,
MT6358_ID_VCN18,
MT6358_ID_VFE28,
MT6358_ID_VSRAM_PROC11,
MT6358_ID_VCN28,
MT6358_ID_VSRAM_OTHERS,
MT6358_ID_VSRAM_GPU,
MT6358_ID_VXO22,
MT6358_ID_VEFUSE,
MT6358_ID_VAUX18,
MT6358_ID_VMCH,
MT6358_ID_VBIF28,
MT6358_ID_VSRAM_PROC12,
MT6358_ID_VCAMA1,
MT6358_ID_VEMC,
MT6358_ID_VIO28,
MT6358_ID_VA12,
MT6358_ID_VRF18,
MT6358_ID_VCN33_BT,
MT6358_ID_VCN33_WIFI,
MT6358_ID_VCAMA2,
MT6358_ID_VMC,
MT6358_ID_VLDO28,
MT6358_ID_VAUD28,
MT6358_ID_VSIM2,
MT6358_ID_RG_MAX,
};
#define MT6358_MAX_REGULATOR MT6358_ID_RG_MAX
#endif /* __LINUX_REGULATOR_MT6358_H */