leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

drm/i915/gen4: Fix interrupt setup ordering

Browse Source 
Unmask, then enable interrupts, then enable interrupt sources; matches
PCH ordering.  The old way (sources, enable, unmask) gives a window
during which interrupt conditions would appear in ISR but would never
reach IIR and thus never raise an IRQ.  Since interrupts only trigger
on rising edges in ISR, this would lead to conditions where (for
example) output hotplugging would never fire an interrupt because it
was already stuck on in ISR.

Also, since we know IIR and PIPExSTAT have been cleared during
irq_preinstall, don't clear them again during irq_postinstall, nothing
good can come of that.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
This commit is contained in:
Adam Jackson 2010-05-27 17:26:45 -04:00 committed by Eric Anholt
parent f458823b86
commit c496fa1fff
1 changed files with 26 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
drivers/gpu/drm/i915/i915_irq.c
View File

@ -1386,6 +1386,32 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
dev_priv->pipestat[0] = 0;
dev_priv->pipestat[1] = 0;
if (I915_HAS_HOTPLUG(dev)) {
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
dev_priv->irq_mask_reg &= ~I915_DISPLAY_PORT_INTERRUPT;
}
/*
* Enable some error detection, note the instruction error mask
* bit is reserved, so we leave it masked.
*/
if (IS_G4X(dev)) {
error_mask = ~(GM45_ERROR_PAGE_TABLE |
GM45_ERROR_MEM_PRIV |
GM45_ERROR_CP_PRIV |
I915_ERROR_MEMORY_REFRESH);
} else {
error_mask = ~(I915_ERROR_PAGE_TABLE |
I915_ERROR_MEMORY_REFRESH);
}
I915_WRITE(EMR, error_mask);
I915_WRITE(IMR, dev_priv->irq_mask_reg);
I915_WRITE(IER, enable_mask);
(void) I915_READ(IER);
if (I915_HAS_HOTPLUG(dev)) {
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
@ -1405,38 +1431,8 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
/* Ignore TV since it's buggy */
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
i915_enable_irq(dev_priv, I915_DISPLAY_PORT_INTERRUPT);
}
/*
* Enable some error detection, note the instruction error mask
* bit is reserved, so we leave it masked.
*/
if (IS_G4X(dev)) {
error_mask = ~(GM45_ERROR_PAGE_TABLE |
GM45_ERROR_MEM_PRIV |
GM45_ERROR_CP_PRIV |
I915_ERROR_MEMORY_REFRESH);
} else {
error_mask = ~(I915_ERROR_PAGE_TABLE |
I915_ERROR_MEMORY_REFRESH);
}
I915_WRITE(EMR, error_mask);
/* Disable pipe interrupt enables, clear pending pipe status */
I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
/* Clear pending interrupt status */
I915_WRITE(IIR, I915_READ(IIR));
I915_WRITE(IER, enable_mask);
I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IER);
opregion_enable_asle(dev);
return 0;