forked from Minki/linux
regulator: Add MAX20086-MAX20089 driver
The MAX20086-MAX20089 are dual/quad power protectors for cameras. Add a driver that supports controlling the outputs individually. Additional features, such as overcurrent detection, may be added later if needed. Signed-off-by: Watson Chow <watson.chow@avnet.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20220106224350.16957-3-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Watson Chow
Mark Brown
parent
764aaa4e03
commit
bfff546aae
@ -11558,6 +11558,13 @@ S: Maintained
|
||||
F: Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
|
||||
F: drivers/power/supply/max17042_battery.c
|
||||
|
||||
MAXIM MAX20086 CAMERA POWER PROTECTOR DRIVER
|
||||
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/regulator/maxim,max20086.yaml
|
||||
F: drivers/regulator/max20086-regulator.c
|
||||
|
||||
MAXIM MAX77650 PMIC MFD DRIVER
|
||||
M: Bartosz Golaszewski <brgl@bgdev.pl>
|
||||
L: linux-kernel@vger.kernel.org
|
||||
|
||||
@ -636,6 +636,15 @@ config REGULATOR_MAX8998
|
||||
via I2C bus. The provided regulator is suitable for S3C6410
|
||||
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
|
||||
|
||||
config REGULATOR_MAX20086
|
||||
tristate "Maxim MAX20086-MAX20089 Camera Power Protectors"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver controls a Maxim MAX20086-MAX20089 camera power
|
||||
protectorvia I2C bus. The regulator has 2 or 4 outputs depending on
|
||||
the device model. This driver is only capable to turn on/off them.
|
||||
|
||||
config REGULATOR_MAX77686
|
||||
tristate "Maxim 77686 regulator"
|
||||
depends on MFD_MAX77686 || COMPILE_TEST
|
||||
@ -1424,4 +1433,3 @@ config REGULATOR_QCOM_LABIBB
|
||||
for LCD display panel.
|
||||
|
||||
endif
|
||||
|
||||
|
||||
@ -78,6 +78,7 @@ obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
|
||||
obj-$(CONFIG_REGULATOR_MAX8973) += max8973-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MAX8997) += max8997-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
|
||||
obj-$(CONFIG_REGULATOR_MAX20086) += max20086-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
|
||||
|
||||
332
drivers/regulator/max20086-regulator.c
Normal file
332
drivers/regulator/max20086-regulator.c
Normal file
@ -0,0 +1,332 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
//
|
||||
// max20086-regulator.c - MAX20086-MAX20089 camera power protector driver
|
||||
//
|
||||
// Copyright (C) 2022 Laurent Pinchart <laurent.pinchart@idesonboard.com>
|
||||
// Copyright (C) 2018 Avnet, Inc.
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
/* Register Offset */
|
||||
#define MAX20086_REG_MASK 0x00
|
||||
#define MAX20086_REG_CONFIG 0x01
|
||||
#define MAX20086_REG_ID 0x02
|
||||
#define MAX20086_REG_STAT1 0x03
|
||||
#define MAX20086_REG_STAT2_L 0x04
|
||||
#define MAX20086_REG_STAT2_H 0x05
|
||||
#define MAX20086_REG_ADC1 0x06
|
||||
#define MAX20086_REG_ADC2 0x07
|
||||
#define MAX20086_REG_ADC3 0x08
|
||||
#define MAX20086_REG_ADC4 0x09
|
||||
|
||||
/* DEVICE IDs */
|
||||
#define MAX20086_DEVICE_ID_MAX20086 0x40
|
||||
#define MAX20086_DEVICE_ID_MAX20087 0x20
|
||||
#define MAX20086_DEVICE_ID_MAX20088 0x10
|
||||
#define MAX20086_DEVICE_ID_MAX20089 0x00
|
||||
#define DEVICE_ID_MASK 0xf0
|
||||
|
||||
/* Register bits */
|
||||
#define MAX20086_EN_MASK 0x0f
|
||||
#define MAX20086_EN_OUT1 0x01
|
||||
#define MAX20086_EN_OUT2 0x02
|
||||
#define MAX20086_EN_OUT3 0x04
|
||||
#define MAX20086_EN_OUT4 0x08
|
||||
#define MAX20086_INT_DISABLE_ALL 0x3f
|
||||
|
||||
#define MAX20086_MAX_REGULATORS 4
|
||||
|
||||
struct max20086_chip_info {
|
||||
u8 id;
|
||||
unsigned int num_outputs;
|
||||
};
|
||||
|
||||
struct max20086_regulator {
|
||||
struct device_node *of_node;
|
||||
struct regulator_init_data *init_data;
|
||||
const struct regulator_desc *desc;
|
||||
struct regulator_dev *rdev;
|
||||
};
|
||||
|
||||
struct max20086 {
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
struct gpio_desc *ena_gpiod;
|
||||
|
||||
const struct max20086_chip_info *info;
|
||||
|
||||
struct max20086_regulator regulators[MAX20086_MAX_REGULATORS];
|
||||
};
|
||||
|
||||
static const struct regulator_ops max20086_buck_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
};
|
||||
|
||||
#define MAX20086_REGULATOR_DESC(n) \
|
||||
{ \
|
||||
.name = "OUT"#n, \
|
||||
.supply_name = "in", \
|
||||
.id = (n) - 1, \
|
||||
.ops = &max20086_buck_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.enable_reg = MAX20086_REG_CONFIG, \
|
||||
.enable_mask = 1 << ((n) - 1), \
|
||||
.enable_val = 1 << ((n) - 1), \
|
||||
.disable_val = 0, \
|
||||
}
|
||||
|
||||
static const char * const max20086_output_names[] = {
|
||||
"OUT1",
|
||||
"OUT2",
|
||||
"OUT3",
|
||||
"OUT4",
|
||||
};
|
||||
|
||||
static const struct regulator_desc max20086_regulators[] = {
|
||||
MAX20086_REGULATOR_DESC(1),
|
||||
MAX20086_REGULATOR_DESC(2),
|
||||
MAX20086_REGULATOR_DESC(3),
|
||||
MAX20086_REGULATOR_DESC(4),
|
||||
};
|
||||
|
||||
static int max20086_regulators_register(struct max20086 *chip)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < chip->info->num_outputs; i++) {
|
||||
struct max20086_regulator *reg = &chip->regulators[i];
|
||||
struct regulator_config config = { };
|
||||
struct regulator_dev *rdev;
|
||||
|
||||
config.dev = chip->dev;
|
||||
config.init_data = reg->init_data;
|
||||
config.driver_data = chip;
|
||||
config.of_node = reg->of_node;
|
||||
config.regmap = chip->regmap;
|
||||
config.ena_gpiod = chip->ena_gpiod;
|
||||
|
||||
rdev = devm_regulator_register(chip->dev, reg->desc, &config);
|
||||
if (IS_ERR(rdev)) {
|
||||
dev_err(chip->dev,
|
||||
"Failed to register regulator output %s\n",
|
||||
reg->desc->name);
|
||||
return PTR_ERR(rdev);
|
||||
}
|
||||
|
||||
reg->rdev = rdev;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max20086_parse_regulators_dt(struct max20086 *chip, bool *boot_on)
|
||||
{
|
||||
struct of_regulator_match matches[MAX20086_MAX_REGULATORS] = { };
|
||||
struct device_node *node;
|
||||
unsigned int i;
|
||||
int ret;
|
||||
|
||||
node = of_get_child_by_name(chip->dev->of_node, "regulators");
|
||||
if (!node) {
|
||||
dev_err(chip->dev, "regulators node not found\n");
|
||||
return PTR_ERR(node);
|
||||
}
|
||||
|
||||
for (i = 0; i < chip->info->num_outputs; ++i)
|
||||
matches[i].name = max20086_output_names[i];
|
||||
|
||||
ret = of_regulator_match(chip->dev, node, matches,
|
||||
chip->info->num_outputs);
|
||||
of_node_put(node);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to match regulators\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
*boot_on = false;
|
||||
|
||||
for (i = 0; i < chip->info->num_outputs; i++) {
|
||||
struct max20086_regulator *reg = &chip->regulators[i];
|
||||
|
||||
reg->init_data = matches[i].init_data;
|
||||
reg->of_node = matches[i].of_node;
|
||||
reg->desc = &max20086_regulators[i];
|
||||
|
||||
if (reg->init_data) {
|
||||
if (reg->init_data->constraints.always_on ||
|
||||
reg->init_data->constraints.boot_on)
|
||||
*boot_on = true;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max20086_detect(struct max20086 *chip)
|
||||
{
|
||||
unsigned int data;
|
||||
int ret;
|
||||
|
||||
ret = regmap_read(chip->regmap, MAX20086_REG_ID, &data);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to read DEVICE_ID reg: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if ((data & DEVICE_ID_MASK) != chip->info->id) {
|
||||
dev_err(chip->dev, "Invalid device ID 0x%02x\n", data);
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static bool max20086_gen_is_writeable_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case MAX20086_REG_MASK:
|
||||
case MAX20086_REG_CONFIG:
|
||||
return true;
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct regmap_config max20086_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.writeable_reg = max20086_gen_is_writeable_reg,
|
||||
.max_register = 0x9,
|
||||
.cache_type = REGCACHE_NONE,
|
||||
};
|
||||
|
||||
static int max20086_i2c_probe(struct i2c_client *i2c)
|
||||
{
|
||||
struct max20086 *chip;
|
||||
enum gpiod_flags flags;
|
||||
bool boot_on;
|
||||
int ret;
|
||||
|
||||
chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
|
||||
if (!chip)
|
||||
return -ENOMEM;
|
||||
|
||||
chip->dev = &i2c->dev;
|
||||
chip->info = device_get_match_data(chip->dev);
|
||||
|
||||
i2c_set_clientdata(i2c, chip);
|
||||
|
||||
chip->regmap = devm_regmap_init_i2c(i2c, &max20086_regmap_config);
|
||||
if (IS_ERR(chip->regmap)) {
|
||||
ret = PTR_ERR(chip->regmap);
|
||||
dev_err(chip->dev, "Failed to allocate register map: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = max20086_parse_regulators_dt(chip, &boot_on);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = max20086_detect(chip);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* Until IRQ support is added, just disable all interrupts. */
|
||||
ret = regmap_update_bits(chip->regmap, MAX20086_REG_MASK,
|
||||
MAX20086_INT_DISABLE_ALL,
|
||||
MAX20086_INT_DISABLE_ALL);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to disable interrupts: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* Get the enable GPIO. If any of the outputs is marked as being
|
||||
* enabled at boot, request the GPIO with an initial high state to
|
||||
* avoid disabling outputs that may have been turned on by the boot
|
||||
* loader. Otherwise, request it with a low state to enter lower-power
|
||||
* shutdown.
|
||||
*/
|
||||
flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
|
||||
chip->ena_gpiod = devm_gpiod_get(chip->dev, "enable", flags);
|
||||
if (IS_ERR(chip->ena_gpiod)) {
|
||||
ret = PTR_ERR(chip->ena_gpiod);
|
||||
dev_err(chip->dev, "Failed to get enable GPIO: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = max20086_regulators_register(chip);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to register regulators: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id max20086_i2c_id[] = {
|
||||
{ "max20086" },
|
||||
{ "max20087" },
|
||||
{ "max20088" },
|
||||
{ "max20089" },
|
||||
{ /* Sentinel */ },
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, max20086_i2c_id);
|
||||
|
||||
static const struct of_device_id max20086_dt_ids[] = {
|
||||
{
|
||||
.compatible = "maxim,max20086",
|
||||
.data = &(const struct max20086_chip_info) {
|
||||
.id = MAX20086_DEVICE_ID_MAX20086,
|
||||
.num_outputs = 4,
|
||||
}
|
||||
}, {
|
||||
.compatible = "maxim,max20087",
|
||||
.data = &(const struct max20086_chip_info) {
|
||||
.id = MAX20086_DEVICE_ID_MAX20087,
|
||||
.num_outputs = 4,
|
||||
}
|
||||
}, {
|
||||
.compatible = "maxim,max20088",
|
||||
.data = &(const struct max20086_chip_info) {
|
||||
.id = MAX20086_DEVICE_ID_MAX20088,
|
||||
.num_outputs = 2,
|
||||
}
|
||||
}, {
|
||||
.compatible = "maxim,max20089",
|
||||
.data = &(const struct max20086_chip_info) {
|
||||
.id = MAX20086_DEVICE_ID_MAX20089,
|
||||
.num_outputs = 2,
|
||||
}
|
||||
},
|
||||
{ /* Sentinel */ },
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(of, max20086_dt_ids);
|
||||
|
||||
static struct i2c_driver max20086_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "max20086",
|
||||
.of_match_table = of_match_ptr(max20086_dt_ids),
|
||||
},
|
||||
.probe_new = max20086_i2c_probe,
|
||||
.id_table = max20086_i2c_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(max20086_regulator_driver);
|
||||
|
||||
MODULE_AUTHOR("Watson Chow <watson.chow@avnet.com>");
|
||||
MODULE_DESCRIPTION("MAX20086-MAX20089 Camera Power Protector Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user