First round of new drivers, features and cleanups for IIO in the 3.19 cycle.

New drivers / supported parts
 * rockchip - rk3066-tsadc variant
 * si7020 humidity and temperature sensor
 * mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
 * bmp280 pressure and temperature sensor
 * Qualcomm SPMI PMIC current ADC driver
 * Exynos_adc - support exynos7
 
 New features
 * vf610-adc - add temperature sensor support
 * Documentation of current attributes, scaled pressure, offset and
   scaled humidity, RGBC intensity gain factor and scale applied to
   differential voltage channels.
 * Bring iio_event_monitor up to date with newer modifiers.
 * Add of_xlate function to allow for complex channel mappings from the
   device tree.
 * Add -g parameter to generic_buffer example to allow for devices with
   directly fed (no trigger) buffers.
 * Move exynos driver over to syscon for PMU register access.
 
 Cleanups, fixes for new drivers
 * lis3l02dq drop an unneeded else.
 * st sensors - renam st_sensors to st_sensor_settings (for clarity)
 * st sensors - drop an unused parameter from all the probe utility
   functions.
 * vf610 better error handling and tidy up.
 * si7020 - cleanups following merge
 * as3935 - drop some unnecessary semicolons.
 * bmp280 - fix the pressure calculation.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUWnZBAAoJEFSFNJnE9BaIZAAQAJpkot0ZAYPwtIkmtV1JqrLQ
 EZRkBN+cIf3q5zp/TnQTqfyhKbpHbJ9/Pnb0zHvn7Yh3WpZod2tyoC3xb8JAlX2h
 3tJRrA7plkdMjtwO/ryOxrVJYrm6rCeqKpciwMpDf4E/4fhU5CU++TpmWbhn04qB
 7PEZJN5dkmdnQYSIyNle11MYN+NpCAB4zqDvRJoJHpqZV6zAqygJy03H1PqXFS/S
 iNBL3jS8/PTbeUURUFOQTiqnJw5KuDke7OoXxUfvCpUwQfNLD8mOTrVrEoId1cM0
 Y2fmasfHteh83KP34/MOTwNA3EezM8iQOMzJnXtOpxpySPDrDSP68FDAJs15TUJm
 je8E1xxxdjOWuzgSd9djNm9qhlBkoYgbRwzc8wSAHMK7mCV7pP485WZk5E8rRX2z
 gMFgUmu4LkiZ2V9glGTAcHqnjhLNDTRCp1Nl/sMVgssFBBNjgR5+nZjUFqDR2QpD
 eo4ReIzev7Rzxe2lACRjnRrCnO+KKcjiDkyCdM3X2zdTddQRVrP5Uz+jgnvGAeMO
 hCYDHSOiMzV/r5emVfmNG9w8P9a6rZqu4KqcM/KjSzAfHFQTqmfr4Tkfn/hbeUjY
 h/zzB18EM4kUSxm3E6+CbFRWcfC7b/PLcUOwSitdujb9cYaX72gdesO2/P3jNFAK
 2bjoLRr5l4M4n/DeHae4
 =BDOo
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, features and cleanups for IIO in the 3.19 cycle.

New drivers / supported parts
* rockchip - rk3066-tsadc variant
* si7020 humidity and temperature sensor
* mcp320x - add mcp3001, mcp3002, mcp3004, mcp3008, mcp3201, mcp3202
* bmp280 pressure and temperature sensor
* Qualcomm SPMI PMIC current ADC driver
* Exynos_adc - support exynos7

New features
* vf610-adc - add temperature sensor support
* Documentation of current attributes, scaled pressure, offset and
  scaled humidity, RGBC intensity gain factor and scale applied to
  differential voltage channels.
* Bring iio_event_monitor up to date with newer modifiers.
* Add of_xlate function to allow for complex channel mappings from the
  device tree.
* Add -g parameter to generic_buffer example to allow for devices with
  directly fed (no trigger) buffers.
* Move exynos driver over to syscon for PMU register access.

Cleanups, fixes for new drivers
* lis3l02dq drop an unneeded else.
* st sensors - renam st_sensors to st_sensor_settings (for clarity)
* st sensors - drop an unused parameter from all the probe utility
  functions.
* vf610 better error handling and tidy up.
* si7020 - cleanups following merge
* as3935 - drop some unnecessary semicolons.
* bmp280 - fix the pressure calculation.

Documentation/ABI/testing/sysfs-bus-iio

@@ -200,6 +200,13 @@ Description:
 		Raw pressure measurement from channel Y. Units after
 		application of scale and offset are kilopascal.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_input
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_input
+KernelVersion:	3.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scaled pressure measurement from channel Y, in kilopascal.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw
 KernelVersion:	3.14
 Contact:	linux-iio@vger.kernel.org
@@ -231,6 +238,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -251,6 +259,7 @@ Description:
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
@@ -266,6 +275,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_sca
 What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -328,6 +338,10 @@ Description:
 		are listed in this attribute.
 
 What		/sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1028,3 +1042,12 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw value of rotation from true/magnetic north measured with
 		or without compensation from tilt sensors.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_raw
+KernelVersion:	3.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw current measurement from channel X. Units are in milliamps
+		after application of scale and offset. If no offset or scale is
+		present, output should be considered as processed with the
+		unit in milliamps.

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -16,6 +16,8 @@ Required properties:
 				future controllers.
 			Must be "samsung,exynos3250-adc" for
 				controllers compatible with ADC of Exynos3250.
+			Must be "samsung,exynos7-adc" for
+				the ADC in Exynos7 and compatibles
 			Must be "samsung,s3c2410-adc" for
 				the ADC in s3c2410 and compatibles
 			Must be "samsung,s3c2416-adc" for
@@ -43,13 +45,16 @@ Required properties:
 				   compatible ADC block)
 - vdd-supply		VDD input supply.
 
+- samsung,syscon-phandle Contains the PMU system controller node
+			(To access the ADC_PHY register on Exynos5250/5420/5800/3250)
+
 Note: child nodes can be added for auto probing from device tree.
 
 Example: adding device info in dtsi file
 
 adc: adc@12D10000 {
 	compatible = "samsung,exynos-adc-v1";
-	reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+	reg = <0x12D10000 0x100>;
 	interrupts = <0 106 0>;
 	#io-channel-cells = <1>;
 	io-channel-ranges;
@@ -58,13 +63,14 @@ adc: adc@12D10000 {
 	clock-names = "adc";
 
 	vdd-supply = <&buck5_reg>;
+	samsung,syscon-phandle = <&pmu_system_controller>;
 };
 
 Example: adding device info in dtsi file for Exynos3250 with additional sclk
 
 adc: adc@126C0000 {
 	compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
-	reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+	reg = <0x126C0000 0x100>;
 	interrupts = <0 137 0>;
 	#io-channel-cells = <1>;
 	io-channel-ranges;
@@ -73,6 +79,7 @@ adc: adc@126C0000 {
 	clock-names = "adc", "sclk";
 
 	vdd-supply = <&buck5_reg>;
+	samsung,syscon-phandle = <&pmu_system_controller>;
 };
 
 Example: Adding child nodes in dts file

Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt

@@ -0,0 +1,46 @@
+Qualcomm's SPMI PMIC current ADC
+
+QPNP PMIC current ADC (IADC) provides interface to clients to read current.
+A 16 bit ADC is used for current measurements. IADC can measure the current
+through an external resistor (channel 1) or internal (built-in) resistor
+(channel 0). When using an external resistor it is to be described by
+qcom,external-resistor-micro-ohms property.
+
+IADC node:
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,spmi-iadc".
+
+- reg:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: IADC base address and length in the SPMI PMIC register map
+
+- interrupts:
+    Usage: optional
+    Value type: <prop-encoded-array>
+    Definition: End of ADC conversion.
+
+- qcom,external-resistor-micro-ohms:
+    Usage: optional
+    Value type: <u32>
+    Definition: Sense resister value in micro Ohm.
+                If not defined value of 10000 micro Ohms will be used.
+
+Example:
+	/* IADC node */
+	pmic_iadc: iadc@3600 {
+		compatible = "qcom,spmi-iadc";
+		reg = <0x3600 0x100>;
+		interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+		qcom,external-resistor-micro-ohms = <10000>;
+		#io-channel-cells  = <1>;
+	};
+
+	/* IIO client node */
+	bat {
+		io-channels = <&pmic_iadc  0>;
+		io-channel-names = "iadc";
+	};

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt

@@ -1,7 +1,7 @@
 Rockchip Successive Approximation Register (SAR) A/D Converter bindings
 
 Required properties:
-- compatible: Should be "rockchip,saradc"
+- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc"
 - reg: physical base address of the controller and length of memory mapped
        region.
 - interrupts: The interrupt number to the cpu. The interrupt specifier format

arch/arm/boot/dts/exynos3250.dtsi

@@ -311,12 +311,13 @@
 		adc: adc@126C0000 {
 			compatible = "samsung,exynos3250-adc",
 				     "samsung,exynos-adc-v2";
-			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+			reg = <0x126C0000 0x100>;
 			interrupts = <0 137 0>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
 			#io-channel-cells = <1>;
 			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/exynos4x12.dtsi

@@ -108,13 +108,14 @@
 
 	adc: adc@126C0000 {
 		compatible = "samsung,exynos-adc-v1";
-		reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+		reg = <0x126C0000 0x100>;
 		interrupt-parent = <&combiner>;
 		interrupts = <10 3>;
 		clocks = <&clock CLK_TSADC>;
 		clock-names = "adc";
 		#io-channel-cells = <1>;
 		io-channel-ranges;
+		samsung,syscon-phandle = <&pmu_system_controller>;
 		status = "disabled";
 	};
 

arch/arm/boot/dts/exynos5250.dtsi

@@ -750,12 +750,13 @@
 
 	adc: adc@12D10000 {
 		compatible = "samsung,exynos-adc-v1";
-		reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+		reg = <0x12D10000 0x100>;
 		interrupts = <0 106 0>;
 		clocks = <&clock CLK_ADC>;
 		clock-names = "adc";
 		#io-channel-cells = <1>;
 		io-channel-ranges;
+		samsung,syscon-phandle = <&pmu_system_controller>;
 		status = "disabled";
 	};
 

arch/arm/boot/dts/exynos5420.dtsi

@@ -541,12 +541,13 @@
 
 	adc: adc@12D10000 {
 		compatible = "samsung,exynos-adc-v2";
-		reg = <0x12D10000 0x100>, <0x10040720 0x4>;
+		reg = <0x12D10000 0x100>;
 		interrupts = <0 106 0>;
 		clocks = <&clock CLK_TSADC>;
 		clock-names = "adc";
 		#io-channel-cells = <1>;
 		io-channel-ranges;
+		samsung,syscon-phandle = <&pmu_system_controller>;
 		status = "disabled";
 	};
 

drivers/iio/accel/st_accel.h

@@ -33,8 +33,7 @@ static const struct st_sensors_platform_data default_accel_pdata = {
 	.drdy_int_pin = 1,
 };
 
-int st_accel_common_probe(struct iio_dev *indio_dev,
+int st_accel_common_probe(struct iio_dev *indio_dev);
-					struct st_sensors_platform_data *pdata);
 void st_accel_common_remove(struct iio_dev *indio_dev);
 
 #ifdef CONFIG_IIO_BUFFER

drivers/iio/accel/st_accel_core.c

@@ -161,7 +161,7 @@ static const struct iio_chan_spec st_accel_16bit_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
-static const struct st_sensors st_accel_sensors[] = {
+static const struct st_sensor_settings st_accel_sensors_settings[] = {
 	{
 		.wai = ST_ACCEL_1_WAI_EXP,
 		.sensors_supported = {
@@ -457,8 +457,7 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
 #define ST_ACCEL_TRIGGER_OPS NULL
 #endif
 
-int st_accel_common_probe(struct iio_dev *indio_dev,
+int st_accel_common_probe(struct iio_dev *indio_dev)
-				struct st_sensors_platform_data *plat_data)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 	int irq = adata->get_irq_data_ready(indio_dev);
@@ -470,24 +469,25 @@ int st_accel_common_probe(struct iio_dev *indio_dev,
 	st_sensors_power_enable(indio_dev);
 
 	err = st_sensors_check_device_support(indio_dev,
-				ARRAY_SIZE(st_accel_sensors), st_accel_sensors);
+					ARRAY_SIZE(st_accel_sensors_settings),
+					st_accel_sensors_settings);
 	if (err < 0)
 		return err;
 
 	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
-	adata->multiread_bit = adata->sensor->multi_read_bit;
+	adata->multiread_bit = adata->sensor_settings->multi_read_bit;
-	indio_dev->channels = adata->sensor->ch;
+	indio_dev->channels = adata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
 	adata->current_fullscale = (struct st_sensor_fullscale_avl *)
-						&adata->sensor->fs.fs_avl[0];
+					&adata->sensor_settings->fs.fs_avl[0];
-	adata->odr = adata->sensor->odr.odr_avl[0].hz;
+	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
 
-	if (!plat_data)
+	if (!adata->dev->platform_data)
-		plat_data =
+		adata->dev->platform_data =
 			(struct st_sensors_platform_data *)&default_accel_pdata;
 
-	err = st_sensors_init_sensor(indio_dev, plat_data);
+	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
 	if (err < 0)
 		return err;
 

drivers/iio/accel/st_accel_i2c.c

@@ -79,12 +79,11 @@ static int st_accel_i2c_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	adata = iio_priv(indio_dev);
-	adata->dev = &client->dev;
 	st_sensors_of_i2c_probe(client, st_accel_of_match);
 
 	st_sensors_i2c_configure(indio_dev, client, adata);
 
-	err = st_accel_common_probe(indio_dev, client->dev.platform_data);
+	err = st_accel_common_probe(indio_dev);
 	if (err < 0)
 		return err;
 

drivers/iio/accel/st_accel_spi.c

@@ -29,11 +29,10 @@ static int st_accel_spi_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	adata = iio_priv(indio_dev);
-	adata->dev = &spi->dev;
 
 	st_sensors_spi_configure(indio_dev, spi, adata);
 
-	err = st_accel_common_probe(indio_dev, spi->dev.platform_data);
+	err = st_accel_common_probe(indio_dev);
 	if (err < 0)
 		return err;
 

drivers/iio/adc/Kconfig

@@ -206,6 +206,20 @@ config NAU7802
 	  To compile this driver as a module, choose M here: the
 	  module will be called nau7802.
 
+config QCOM_SPMI_IADC
+	tristate "Qualcomm SPMI PMIC current ADC"
+	depends on SPMI
+	select REGMAP_SPMI
+	help
+	  This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip.
+
+	  The driver supports single mode operation to read from one of two
+	  channels (external or internal). Hardware have additional
+	  channels internally used for gain and offset calibration.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called qcom-spmi-iadc.
+
 config ROCKCHIP_SARADC
 	tristate "Rockchip SARADC driver"
 	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)

drivers/iio/adc/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
+obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o

drivers/iio/adc/exynos_adc.c

@@ -39,6 +39,8 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/machine.h>
 #include <linux/iio/driver.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 /* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
 #define ADC_V1_CON(x)		((x) + 0x00)
@@ -90,11 +92,14 @@
 
 #define EXYNOS_ADC_TIMEOUT	(msecs_to_jiffies(100))
 
+#define EXYNOS_ADCV1_PHY_OFFSET	0x0718
+#define EXYNOS_ADCV2_PHY_OFFSET	0x0720
+
 struct exynos_adc {
 	struct exynos_adc_data	*data;
 	struct device		*dev;
 	void __iomem		*regs;
-	void __iomem		*enable_reg;
+	struct regmap		*pmu_map;
 	struct clk		*clk;
 	struct clk		*sclk;
 	unsigned int		irq;
@@ -110,6 +115,7 @@ struct exynos_adc_data {
 	int num_channels;
 	bool needs_sclk;
 	bool needs_adc_phy;
+	int phy_offset;
 	u32 mask;
 
 	void (*init_hw)(struct exynos_adc *info);
@@ -183,7 +189,7 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
 	u32 con1;
 
 	if (info->data->needs_adc_phy)
-		writel(1, info->enable_reg);
+		regmap_write(info->pmu_map, info->data->phy_offset, 1);
 
 	/* set default prescaler values and Enable prescaler */
 	con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
@@ -198,7 +204,7 @@ static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
 	u32 con;
 
 	if (info->data->needs_adc_phy)
-		writel(0, info->enable_reg);
+		regmap_write(info->pmu_map, info->data->phy_offset, 0);
 
 	con = readl(ADC_V1_CON(info->regs));
 	con |= ADC_V1_CON_STANDBY;
@@ -225,6 +231,7 @@ static const struct exynos_adc_data exynos_adc_v1_data = {
 	.num_channels	= MAX_ADC_V1_CHANNELS,
 	.mask		= ADC_DATX_MASK,	/* 12 bit ADC resolution */
 	.needs_adc_phy	= true,
+	.phy_offset	= EXYNOS_ADCV1_PHY_OFFSET,
 
 	.init_hw	= exynos_adc_v1_init_hw,
 	.exit_hw	= exynos_adc_v1_exit_hw,
@@ -314,7 +321,7 @@ static void exynos_adc_v2_init_hw(struct exynos_adc *info)
 	u32 con1, con2;
 
 	if (info->data->needs_adc_phy)
-		writel(1, info->enable_reg);
+		regmap_write(info->pmu_map, info->data->phy_offset, 1);
 
 	con1 = ADC_V2_CON1_SOFT_RESET;
 	writel(con1, ADC_V2_CON1(info->regs));
@@ -332,7 +339,7 @@ static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
 	u32 con;
 
 	if (info->data->needs_adc_phy)
-		writel(0, info->enable_reg);
+		regmap_write(info->pmu_map, info->data->phy_offset, 0);
 
 	con = readl(ADC_V2_CON1(info->regs));
 	con &= ~ADC_CON_EN_START;
@@ -362,6 +369,7 @@ static const struct exynos_adc_data exynos_adc_v2_data = {
 	.num_channels	= MAX_ADC_V2_CHANNELS,
 	.mask		= ADC_DATX_MASK, /* 12 bit ADC resolution */
 	.needs_adc_phy	= true,
+	.phy_offset	= EXYNOS_ADCV2_PHY_OFFSET,
 
 	.init_hw	= exynos_adc_v2_init_hw,
 	.exit_hw	= exynos_adc_v2_exit_hw,
@@ -374,6 +382,7 @@ static const struct exynos_adc_data exynos3250_adc_data = {
 	.mask		= ADC_DATX_MASK, /* 12 bit ADC resolution */
 	.needs_sclk	= true,
 	.needs_adc_phy	= true,
+	.phy_offset	= EXYNOS_ADCV1_PHY_OFFSET,
 
 	.init_hw	= exynos_adc_v2_init_hw,
 	.exit_hw	= exynos_adc_v2_exit_hw,
@@ -381,6 +390,35 @@ static const struct exynos_adc_data exynos3250_adc_data = {
 	.start_conv	= exynos_adc_v2_start_conv,
 };
 
+static void exynos_adc_exynos7_init_hw(struct exynos_adc *info)
+{
+	u32 con1, con2;
+
+	if (info->data->needs_adc_phy)
+		regmap_write(info->pmu_map, info->data->phy_offset, 1);
+
+	con1 = ADC_V2_CON1_SOFT_RESET;
+	writel(con1, ADC_V2_CON1(info->regs));
+
+	con2 = readl(ADC_V2_CON2(info->regs));
+	con2 &= ~ADC_V2_CON2_C_TIME(7);
+	con2 |= ADC_V2_CON2_C_TIME(0);
+	writel(con2, ADC_V2_CON2(info->regs));
+
+	/* Enable interrupts */
+	writel(1, ADC_V2_INT_EN(info->regs));
+}
+
+static const struct exynos_adc_data exynos7_adc_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_DATX_MASK, /* 12 bit ADC resolution */
+
+	.init_hw	= exynos_adc_exynos7_init_hw,
+	.exit_hw	= exynos_adc_v2_exit_hw,
+	.clear_irq	= exynos_adc_v2_clear_irq,
+	.start_conv	= exynos_adc_v2_start_conv,
+};
+
 static const struct of_device_id exynos_adc_match[] = {
 	{
 		.compatible = "samsung,s3c2410-adc",
@@ -406,6 +444,9 @@ static const struct of_device_id exynos_adc_match[] = {
 	}, {
 		.compatible = "samsung,exynos3250-adc",
 		.data = &exynos3250_adc_data,
+	}, {
+		.compatible = "samsung,exynos7-adc",
+		.data = &exynos7_adc_data,
 	},
 	{},
 };
@@ -558,10 +599,13 @@ static int exynos_adc_probe(struct platform_device *pdev)
 
 
 	if (info->data->needs_adc_phy) {
-		mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		info->pmu_map = syscon_regmap_lookup_by_phandle(
-		info->enable_reg = devm_ioremap_resource(&pdev->dev, mem);
+					pdev->dev.of_node,
-		if (IS_ERR(info->enable_reg))
+					"samsung,syscon-phandle");
-			return PTR_ERR(info->enable_reg);
+		if (IS_ERR(info->pmu_map)) {
+			dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
+			return PTR_ERR(info->pmu_map);
+		}
 	}
 
 	irq = platform_get_irq(pdev, 0);

drivers/iio/adc/mcp320x.c

@@ -1,9 +1,30 @@
 /*
  * Copyright (C) 2013 Oskar Andero <oskar.andero@gmail.com>
+ * Copyright (C) 2014 Rose Technology
+ * 	   Allan Bendorff Jensen <abj@rosetechnology.dk>
+ *	   Soren Andersen <san@rosetechnology.dk>
+ *
+ * Driver for following ADC chips from Microchip Technology's:
+ * 10 Bit converter
+ * MCP3001
+ * MCP3002
+ * MCP3004
+ * MCP3008
+ * ------------
+ * 12 bit converter
+ * MCP3201
+ * MCP3202
+ * MCP3204
+ * MCP3208
+ * ------------
  *
- * Driver for Microchip Technology's MCP3204 and MCP3208 ADC chips.
  * Datasheet can be found here:
- * http://ww1.microchip.com/downloads/en/devicedoc/21298c.pdf
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21293C.pdf  mcp3001
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21294E.pdf  mcp3002
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21295d.pdf  mcp3004/08
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21290D.pdf  mcp3201
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21034D.pdf  mcp3202
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/21298c.pdf  mcp3204/08
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,19 +32,29 @@
  */
 
 #include <linux/err.h>
+#include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/module.h>
 #include <linux/iio/iio.h>
 #include <linux/regulator/consumer.h>
 
-#define MCP_SINGLE_ENDED	(1 << 3)
-#define MCP_START_BIT		(1 << 4)
-
 enum {
+	mcp3001,
+	mcp3002,
+	mcp3004,
+	mcp3008,
+	mcp3201,
+	mcp3202,
 	mcp3204,
 	mcp3208,
 };
 
+struct mcp320x_chip_info {
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+	unsigned int resolution;
+};
+
 struct mcp320x {
 	struct spi_device *spi;
 	struct spi_message msg;
@@ -34,19 +65,69 @@ struct mcp320x {
 
 	struct regulator *reg;
 	struct mutex lock;
+	const struct mcp320x_chip_info *chip_info;
 };
 
-static int mcp320x_adc_conversion(struct mcp320x *adc, u8 msg)
+static int mcp320x_channel_to_tx_data(int device_index,
+			const unsigned int channel, bool differential)
+{
+	int start_bit = 1;
+
+	switch (device_index) {
+	case mcp3001:
+	case mcp3201:
+		return 0;
+	case mcp3002:
+	case mcp3202:
+		return ((start_bit << 4) | (!differential << 3) |
+							(channel << 2));
+	case mcp3004:
+	case mcp3204:
+	case mcp3008:
+	case mcp3208:
+		return ((start_bit << 6) | (!differential << 5) |
+							(channel << 2));
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mcp320x_adc_conversion(struct mcp320x *adc, u8 channel,
+				  bool differential, int device_index)
 {
 	int ret;
 
-	adc->tx_buf = msg;
+	adc->rx_buf[0] = 0;
-	ret = spi_sync(adc->spi, &adc->msg);
+	adc->rx_buf[1] = 0;
-	if (ret < 0)
+	adc->tx_buf = mcp320x_channel_to_tx_data(device_index,
-		return ret;
+						channel, differential);
 
-	return ((adc->rx_buf[0] & 0x3f) << 6)  |
+	if (device_index != mcp3001 && device_index != mcp3201) {
-		(adc->rx_buf[1] >> 2);
+		ret = spi_sync(adc->spi, &adc->msg);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = spi_read(adc->spi, &adc->rx_buf, sizeof(adc->rx_buf));
+		if (ret < 0)
+			return ret;
+	}
+
+	switch (device_index) {
+	case mcp3001:
+		return (adc->rx_buf[0] << 5 | adc->rx_buf[1] >> 3);
+	case mcp3002:
+	case mcp3004:
+	case mcp3008:
+		return (adc->rx_buf[0] << 2 | adc->rx_buf[1] >> 6);
+	case mcp3201:
+		return (adc->rx_buf[0] << 7 | adc->rx_buf[1] >> 1);
+	case mcp3202:
+	case mcp3204:
+	case mcp3208:
+		return (adc->rx_buf[0] << 4 | adc->rx_buf[1] >> 4);
+	default:
+		return -EINVAL;
+	}
 }
 
 static int mcp320x_read_raw(struct iio_dev *indio_dev,
@@ -55,18 +136,17 @@ static int mcp320x_read_raw(struct iio_dev *indio_dev,
 {
 	struct mcp320x *adc = iio_priv(indio_dev);
 	int ret = -EINVAL;
+	int device_index = 0;
 
 	mutex_lock(&adc->lock);
 
+	device_index = spi_get_device_id(adc->spi)->driver_data;
+
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (channel->differential)
+		ret = mcp320x_adc_conversion(adc, channel->address,
-			ret = mcp320x_adc_conversion(adc,
+			channel->differential, device_index);
-				MCP_START_BIT | channel->address);
+
-		else
-			ret = mcp320x_adc_conversion(adc,
-				MCP_START_BIT | MCP_SINGLE_ENDED |
-				channel->address);
 		if (ret < 0)
 			goto out;
 
@@ -75,18 +155,15 @@ static int mcp320x_read_raw(struct iio_dev *indio_dev,
 		break;
 
 	case IIO_CHAN_INFO_SCALE:
-		/* Digital output code = (4096 * Vin) / Vref */
 		ret = regulator_get_voltage(adc->reg);
 		if (ret < 0)
 			goto out;
 
+		/* convert regulator output voltage to mV */
 		*val = ret / 1000;
-		*val2 = 12;
+		*val2 = adc->chip_info->resolution;
 		ret = IIO_VAL_FRACTIONAL_LOG2;
 		break;
-
-	default:
-		break;
 	}
 
 out:
@@ -117,6 +194,16 @@ out:
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
 	}
 
+static const struct iio_chan_spec mcp3201_channels[] = {
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+};
+
+static const struct iio_chan_spec mcp3202_channels[] = {
+	MCP320X_VOLTAGE_CHANNEL(0),
+	MCP320X_VOLTAGE_CHANNEL(1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+};
+
 static const struct iio_chan_spec mcp3204_channels[] = {
 	MCP320X_VOLTAGE_CHANNEL(0),
 	MCP320X_VOLTAGE_CHANNEL(1),
@@ -146,19 +233,46 @@ static const struct iio_info mcp320x_info = {
 	.driver_module = THIS_MODULE,
 };
 
-struct mcp3208_chip_info {
+static const struct mcp320x_chip_info mcp320x_chip_infos[] = {
-	const struct iio_chan_spec *channels;
+	[mcp3001] = {
-	unsigned int num_channels;
+		.channels = mcp3201_channels,
-};
+		.num_channels = ARRAY_SIZE(mcp3201_channels),
-
+		.resolution = 10
-static const struct mcp3208_chip_info mcp3208_chip_infos[] = {
+	},
+	[mcp3002] = {
+		.channels = mcp3202_channels,
+		.num_channels = ARRAY_SIZE(mcp3202_channels),
+		.resolution = 10
+	},
+	[mcp3004] = {
+		.channels = mcp3204_channels,
+		.num_channels = ARRAY_SIZE(mcp3204_channels),
+		.resolution = 10
+	},
+	[mcp3008] = {
+		.channels = mcp3208_channels,
+		.num_channels = ARRAY_SIZE(mcp3208_channels),
+		.resolution = 10
+	},
+	[mcp3201] = {
+		.channels = mcp3201_channels,
+		.num_channels = ARRAY_SIZE(mcp3201_channels),
+		.resolution = 12
+	},
+	[mcp3202] = {
+		.channels = mcp3202_channels,
+		.num_channels = ARRAY_SIZE(mcp3202_channels),
+		.resolution = 12
+	},
 	[mcp3204] = {
 		.channels = mcp3204_channels,
-		.num_channels = ARRAY_SIZE(mcp3204_channels)
+		.num_channels = ARRAY_SIZE(mcp3204_channels),
+		.resolution = 12
 	},
 	[mcp3208] = {
 		.channels = mcp3208_channels,
-		.num_channels = ARRAY_SIZE(mcp3208_channels)
+		.num_channels = ARRAY_SIZE(mcp3208_channels),
+		.resolution = 12
 	},
 };
 
@@ -166,7 +280,7 @@ static int mcp320x_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
 	struct mcp320x *adc;
-	const struct mcp3208_chip_info *chip_info;
+	const struct mcp320x_chip_info *chip_info;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
@@ -181,7 +295,7 @@ static int mcp320x_probe(struct spi_device *spi)
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &mcp320x_info;
 
-	chip_info = &mcp3208_chip_infos[spi_get_device_id(spi)->driver_data];
+	chip_info = &mcp320x_chip_infos[spi_get_device_id(spi)->driver_data];
 	indio_dev->channels = chip_info->channels;
 	indio_dev->num_channels = chip_info->num_channels;
 
@@ -226,7 +340,45 @@ static int mcp320x_remove(struct spi_device *spi)
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id mcp320x_dt_ids[] = {
+	{
+		.compatible = "mcp3001",
+		.data = &mcp320x_chip_infos[mcp3001],
+	}, {
+		.compatible = "mcp3002",
+		.data = &mcp320x_chip_infos[mcp3002],
+	}, {
+		.compatible = "mcp3004",
+		.data = &mcp320x_chip_infos[mcp3004],
+	}, {
+		.compatible = "mcp3008",
+		.data = &mcp320x_chip_infos[mcp3008],
+	}, {
+		.compatible = "mcp3201",
+		.data = &mcp320x_chip_infos[mcp3201],
+	}, {
+		.compatible = "mcp3202",
+		.data = &mcp320x_chip_infos[mcp3202],
+	}, {
+		.compatible = "mcp3204",
+		.data = &mcp320x_chip_infos[mcp3204],
+	}, {
+		.compatible = "mcp3208",
+		.data = &mcp320x_chip_infos[mcp3208],
+	}, {
+	}
+};
+MODULE_DEVICE_TABLE(of, mcp320x_dt_ids);
+#endif
+
 static const struct spi_device_id mcp320x_id[] = {
+	{ "mcp3001", mcp3001 },
+	{ "mcp3002", mcp3002 },
+	{ "mcp3004", mcp3004 },
+	{ "mcp3008", mcp3008 },
+	{ "mcp3201", mcp3201 },
+	{ "mcp3202", mcp3202 },
 	{ "mcp3204", mcp3204 },
 	{ "mcp3208", mcp3208 },
 	{ }
@@ -245,5 +397,5 @@ static struct spi_driver mcp320x_driver = {
 module_spi_driver(mcp320x_driver);
 
 MODULE_AUTHOR("Oskar Andero <oskar.andero@gmail.com>");
-MODULE_DESCRIPTION("Microchip Technology MCP3204/08");
+MODULE_DESCRIPTION("Microchip Technology MCP3x01/02/04/08");
 MODULE_LICENSE("GPL v2");

drivers/iio/adc/qcom-spmi-iadc.c

@@ -0,0 +1,595 @@
+/*
+ * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* IADC register and bit definition */
+#define IADC_REVISION2				0x1
+#define IADC_REVISION2_SUPPORTED_IADC		1
+
+#define IADC_PERPH_TYPE				0x4
+#define IADC_PERPH_TYPE_ADC			8
+
+#define IADC_PERPH_SUBTYPE			0x5
+#define IADC_PERPH_SUBTYPE_IADC			3
+
+#define IADC_STATUS1				0x8
+#define IADC_STATUS1_OP_MODE			4
+#define IADC_STATUS1_REQ_STS			BIT(1)
+#define IADC_STATUS1_EOC			BIT(0)
+#define IADC_STATUS1_REQ_STS_EOC_MASK		0x3
+
+#define IADC_MODE_CTL				0x40
+#define IADC_OP_MODE_SHIFT			3
+#define IADC_OP_MODE_NORMAL			0
+#define IADC_TRIM_EN				BIT(0)
+
+#define IADC_EN_CTL1				0x46
+#define IADC_EN_CTL1_SET			BIT(7)
+
+#define IADC_CH_SEL_CTL				0x48
+
+#define IADC_DIG_PARAM				0x50
+#define IADC_DIG_DEC_RATIO_SEL_SHIFT		2
+
+#define IADC_HW_SETTLE_DELAY			0x51
+
+#define IADC_CONV_REQ				0x52
+#define IADC_CONV_REQ_SET			BIT(7)
+
+#define IADC_FAST_AVG_CTL			0x5a
+#define IADC_FAST_AVG_EN			0x5b
+#define IADC_FAST_AVG_EN_SET			BIT(7)
+
+#define IADC_PERH_RESET_CTL3			0xda
+#define IADC_FOLLOW_WARM_RB			BIT(2)
+
+#define IADC_DATA				0x60	/* 16 bits */
+
+#define IADC_SEC_ACCESS				0xd0
+#define IADC_SEC_ACCESS_DATA			0xa5
+
+#define IADC_NOMINAL_RSENSE			0xf4
+#define IADC_NOMINAL_RSENSE_SIGN_MASK		BIT(7)
+
+#define IADC_REF_GAIN_MICRO_VOLTS		17857
+
+#define IADC_INT_RSENSE_DEVIATION		15625	/* nano Ohms per bit */
+
+#define IADC_INT_RSENSE_IDEAL_VALUE		10000	/* micro Ohms */
+#define IADC_INT_RSENSE_DEFAULT_VALUE		7800	/* micro Ohms */
+#define IADC_INT_RSENSE_DEFAULT_GF		9000	/* micro Ohms */
+#define IADC_INT_RSENSE_DEFAULT_SMIC		9700	/* micro Ohms */
+
+#define IADC_CONV_TIME_MIN_US			2000
+#define IADC_CONV_TIME_MAX_US			2100
+
+#define IADC_DEF_PRESCALING			0 /* 1:1 */
+#define IADC_DEF_DECIMATION			0 /* 512 */
+#define IADC_DEF_HW_SETTLE_TIME			0 /* 0 us */
+#define IADC_DEF_AVG_SAMPLES			0 /* 1 sample */
+
+/* IADC channel list */
+#define IADC_INT_RSENSE				0
+#define IADC_EXT_RSENSE				1
+#define IADC_GAIN_17P857MV			3
+#define IADC_EXT_OFFSET_CSP_CSN			5
+#define IADC_INT_OFFSET_CSP2_CSN2		6
+
+/**
+ * struct iadc_chip - IADC Current ADC device structure.
+ * @regmap: regmap for register read/write.
+ * @dev: This device pointer.
+ * @base: base offset for the ADC peripheral.
+ * @rsense: Values of the internal and external sense resister in micro Ohms.
+ * @poll_eoc: Poll for end of conversion instead of waiting for IRQ.
+ * @offset: Raw offset values for the internal and external channels.
+ * @gain: Raw gain of the channels.
+ * @lock: ADC lock for access to the peripheral.
+ * @complete: ADC notification after end of conversion interrupt is received.
+ */
+struct iadc_chip {
+	struct regmap	*regmap;
+	struct device	*dev;
+	u16		base;
+	bool		poll_eoc;
+	u32		rsense[2];
+	u16		offset[2];
+	u16		gain;
+	struct mutex	lock;
+	struct completion complete;
+};
+
+static int iadc_read(struct iadc_chip *iadc, u16 offset, u8 *data)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(iadc->regmap, iadc->base + offset, &val);
+	if (ret < 0)
+		return ret;
+
+	*data = val;
+	return 0;
+}
+
+static int iadc_write(struct iadc_chip *iadc, u16 offset, u8 data)
+{
+	return regmap_write(iadc->regmap, iadc->base + offset, data);
+}
+
+static int iadc_reset(struct iadc_chip *iadc)
+{
+	u8 data;
+	int ret;
+
+	ret = iadc_write(iadc, IADC_SEC_ACCESS, IADC_SEC_ACCESS_DATA);
+	if (ret < 0)
+		return ret;
+
+	ret = iadc_read(iadc, IADC_PERH_RESET_CTL3, &data);
+	if (ret < 0)
+		return ret;
+
+	ret = iadc_write(iadc, IADC_SEC_ACCESS, IADC_SEC_ACCESS_DATA);
+	if (ret < 0)
+		return ret;
+
+	data |= IADC_FOLLOW_WARM_RB;
+
+	return iadc_write(iadc, IADC_PERH_RESET_CTL3, data);
+}
+
+static int iadc_set_state(struct iadc_chip *iadc, bool state)
+{
+	return iadc_write(iadc, IADC_EN_CTL1, state ? IADC_EN_CTL1_SET : 0);
+}
+
+static void iadc_status_show(struct iadc_chip *iadc)
+{
+	u8 mode, sta1, chan, dig, en, req;
+	int ret;
+
+	ret = iadc_read(iadc, IADC_MODE_CTL, &mode);
+	if (ret < 0)
+		return;
+
+	ret = iadc_read(iadc, IADC_DIG_PARAM, &dig);
+	if (ret < 0)
+		return;
+
+	ret = iadc_read(iadc, IADC_CH_SEL_CTL, &chan);
+	if (ret < 0)
+		return;
+
+	ret = iadc_read(iadc, IADC_CONV_REQ, &req);
+	if (ret < 0)
+		return;
+
+	ret = iadc_read(iadc, IADC_STATUS1, &sta1);
+	if (ret < 0)
+		return;
+
+	ret = iadc_read(iadc, IADC_EN_CTL1, &en);
+	if (ret < 0)
+		return;
+
+	dev_err(iadc->dev,
+		"mode:%02x en:%02x chan:%02x dig:%02x req:%02x sta1:%02x\n",
+		mode, en, chan, dig, req, sta1);
+}
+
+static int iadc_configure(struct iadc_chip *iadc, int channel)
+{
+	u8 decim, mode;
+	int ret;
+
+	/* Mode selection */
+	mode = (IADC_OP_MODE_NORMAL << IADC_OP_MODE_SHIFT) | IADC_TRIM_EN;
+	ret = iadc_write(iadc, IADC_MODE_CTL, mode);
+	if (ret < 0)
+		return ret;
+
+	/* Channel selection */
+	ret = iadc_write(iadc, IADC_CH_SEL_CTL, channel);
+	if (ret < 0)
+		return ret;
+
+	/* Digital parameter setup */
+	decim = IADC_DEF_DECIMATION << IADC_DIG_DEC_RATIO_SEL_SHIFT;
+	ret = iadc_write(iadc, IADC_DIG_PARAM, decim);
+	if (ret < 0)
+		return ret;
+
+	/* HW settle time delay */
+	ret = iadc_write(iadc, IADC_HW_SETTLE_DELAY, IADC_DEF_HW_SETTLE_TIME);
+	if (ret < 0)
+		return ret;
+
+	ret = iadc_write(iadc, IADC_FAST_AVG_CTL, IADC_DEF_AVG_SAMPLES);
+	if (ret < 0)
+		return ret;
+
+	if (IADC_DEF_AVG_SAMPLES)
+		ret = iadc_write(iadc, IADC_FAST_AVG_EN, IADC_FAST_AVG_EN_SET);
+	else
+		ret = iadc_write(iadc, IADC_FAST_AVG_EN, 0);
+
+	if (ret < 0)
+		return ret;
+
+	if (!iadc->poll_eoc)
+		reinit_completion(&iadc->complete);
+
+	ret = iadc_set_state(iadc, true);
+	if (ret < 0)
+		return ret;
+
+	/* Request conversion */
+	return iadc_write(iadc, IADC_CONV_REQ, IADC_CONV_REQ_SET);
+}
+
+static int iadc_poll_wait_eoc(struct iadc_chip *iadc, unsigned int interval_us)
+{
+	unsigned int count, retry;
+	int ret;
+	u8 sta1;
+
+	retry = interval_us / IADC_CONV_TIME_MIN_US;
+
+	for (count = 0; count < retry; count++) {
+		ret = iadc_read(iadc, IADC_STATUS1, &sta1);
+		if (ret < 0)
+			return ret;
+
+		sta1 &= IADC_STATUS1_REQ_STS_EOC_MASK;
+		if (sta1 == IADC_STATUS1_EOC)
+			return 0;
+
+		usleep_range(IADC_CONV_TIME_MIN_US, IADC_CONV_TIME_MAX_US);
+	}
+
+	iadc_status_show(iadc);
+
+	return -ETIMEDOUT;
+}
+
+static int iadc_read_result(struct iadc_chip *iadc, u16 *data)
+{
+	return regmap_bulk_read(iadc->regmap, iadc->base + IADC_DATA, data, 2);
+}
+
+static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
+{
+	unsigned int wait;
+	int ret;
+
+	ret = iadc_configure(iadc, chan);
+	if (ret < 0)
+		goto exit;
+
+	wait = BIT(IADC_DEF_AVG_SAMPLES) * IADC_CONV_TIME_MIN_US * 2;
+
+	if (iadc->poll_eoc) {
+		ret = iadc_poll_wait_eoc(iadc, wait);
+	} else {
+		ret = wait_for_completion_timeout(&iadc->complete, wait);
+		if (!ret)
+			ret = -ETIMEDOUT;
+		else
+			/* double check conversion status */
+			ret = iadc_poll_wait_eoc(iadc, IADC_CONV_TIME_MIN_US);
+	}
+
+	if (!ret)
+		ret = iadc_read_result(iadc, data);
+exit:
+	iadc_set_state(iadc, false);
+	if (ret < 0)
+		dev_err(iadc->dev, "conversion failed\n");
+
+	return ret;
+}
+
+static int iadc_read_raw(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan,
+			 int *val, int *val2, long mask)
+{
+	struct iadc_chip *iadc = iio_priv(indio_dev);
+	s32 isense_ua, vsense_uv;
+	u16 adc_raw, vsense_raw;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&iadc->lock);
+		ret = iadc_do_conversion(iadc, chan->channel, &adc_raw);
+		mutex_unlock(&iadc->lock);
+		if (ret < 0)
+			return ret;
+
+		vsense_raw = adc_raw - iadc->offset[chan->channel];
+
+		vsense_uv = vsense_raw * IADC_REF_GAIN_MICRO_VOLTS;
+		vsense_uv /= (s32)iadc->gain - iadc->offset[chan->channel];
+
+		isense_ua = vsense_uv / iadc->rsense[chan->channel];
+
+		dev_dbg(iadc->dev, "off %d gain %d adc %d %duV I %duA\n",
+			iadc->offset[chan->channel], iadc->gain,
+			adc_raw, vsense_uv, isense_ua);
+
+		*val = isense_ua;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info iadc_info = {
+	.read_raw = iadc_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static irqreturn_t iadc_isr(int irq, void *dev_id)
+{
+	struct iadc_chip *iadc = dev_id;
+
+	complete(&iadc->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int iadc_update_offset(struct iadc_chip *iadc)
+{
+	int ret;
+
+	ret = iadc_do_conversion(iadc, IADC_GAIN_17P857MV, &iadc->gain);
+	if (ret < 0)
+		return ret;
+
+	ret = iadc_do_conversion(iadc, IADC_INT_OFFSET_CSP2_CSN2,
+				 &iadc->offset[IADC_INT_RSENSE]);
+	if (ret < 0)
+		return ret;
+
+	if (iadc->gain == iadc->offset[IADC_INT_RSENSE]) {
+		dev_err(iadc->dev, "error: internal offset == gain %d\n",
+			iadc->gain);
+		return -EINVAL;
+	}
+
+	ret = iadc_do_conversion(iadc, IADC_EXT_OFFSET_CSP_CSN,
+				 &iadc->offset[IADC_EXT_RSENSE]);
+	if (ret < 0)
+		return ret;
+
+	if (iadc->gain == iadc->offset[IADC_EXT_RSENSE]) {
+		dev_err(iadc->dev, "error: external offset == gain %d\n",
+			iadc->gain);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int iadc_version_check(struct iadc_chip *iadc)
+{
+	u8 val;
+	int ret;
+
+	ret = iadc_read(iadc, IADC_PERPH_TYPE, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val < IADC_PERPH_TYPE_ADC) {
+		dev_err(iadc->dev, "%d is not ADC\n", val);
+		return -EINVAL;
+	}
+
+	ret = iadc_read(iadc, IADC_PERPH_SUBTYPE, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val < IADC_PERPH_SUBTYPE_IADC) {
+		dev_err(iadc->dev, "%d is not IADC\n", val);
+		return -EINVAL;
+	}
+
+	ret = iadc_read(iadc, IADC_REVISION2, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val < IADC_REVISION2_SUPPORTED_IADC) {
+		dev_err(iadc->dev, "revision %d not supported\n", val);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int iadc_rsense_read(struct iadc_chip *iadc, struct device_node *node)
+{
+	int ret, sign, int_sense;
+	u8 deviation;
+
+	ret = of_property_read_u32(node, "qcom,external-resistor-micro-ohms",
+				   &iadc->rsense[IADC_EXT_RSENSE]);
+	if (ret < 0)
+		iadc->rsense[IADC_EXT_RSENSE] = IADC_INT_RSENSE_IDEAL_VALUE;
+
+	if (!iadc->rsense[IADC_EXT_RSENSE]) {
+		dev_err(iadc->dev, "external resistor can't be zero Ohms");
+		return -EINVAL;
+	}
+
+	ret = iadc_read(iadc, IADC_NOMINAL_RSENSE, &deviation);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Deviation value stored is an offset from 10 mili Ohms, bit 7 is
+	 * the sign, the remaining bits have an LSB of 15625 nano Ohms.
+	 */
+	sign = (deviation & IADC_NOMINAL_RSENSE_SIGN_MASK) ? -1 : 1;
+
+	deviation &= ~IADC_NOMINAL_RSENSE_SIGN_MASK;
+
+	/* Scale it to nono Ohms */
+	int_sense = IADC_INT_RSENSE_IDEAL_VALUE * 1000;
+	int_sense += sign * deviation * IADC_INT_RSENSE_DEVIATION;
+	int_sense /= 1000; /* micro Ohms */
+
+	iadc->rsense[IADC_INT_RSENSE] = int_sense;
+	return 0;
+}
+
+static const struct iio_chan_spec iadc_channels[] = {
+	{
+		.type = IIO_CURRENT,
+		.datasheet_name	= "INTERNAL_RSENSE",
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+	},
+	{
+		.type = IIO_CURRENT,
+		.datasheet_name	= "EXTERNAL_RSENSE",
+		.channel = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.indexed = 1,
+	},
+};
+
+static int iadc_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct iio_dev *indio_dev;
+	struct iadc_chip *iadc;
+	int ret, irq_eoc;
+	u32 res;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*iadc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	iadc = iio_priv(indio_dev);
+	iadc->dev = dev;
+
+	iadc->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!iadc->regmap)
+		return -ENODEV;
+
+	init_completion(&iadc->complete);
+	mutex_init(&iadc->lock);
+
+	ret = of_property_read_u32(node, "reg", &res);
+	if (ret < 0)
+		return -ENODEV;
+
+	iadc->base = res;
+
+	ret = iadc_version_check(iadc);
+	if (ret < 0)
+		return -ENODEV;
+
+	ret = iadc_rsense_read(iadc, node);
+	if (ret < 0)
+		return -ENODEV;
+
+	dev_dbg(iadc->dev, "sense resistors %d and %d micro Ohm\n",
+		iadc->rsense[IADC_INT_RSENSE],
+		iadc->rsense[IADC_EXT_RSENSE]);
+
+	irq_eoc = platform_get_irq(pdev, 0);
+	if (irq_eoc == -EPROBE_DEFER)
+		return irq_eoc;
+
+	if (irq_eoc < 0)
+		iadc->poll_eoc = true;
+
+	ret = iadc_reset(iadc);
+	if (ret < 0) {
+		dev_err(dev, "reset failed\n");
+		return ret;
+	}
+
+	if (!iadc->poll_eoc) {
+		ret = devm_request_irq(dev, irq_eoc, iadc_isr, 0,
+					"spmi-iadc", iadc);
+		if (!ret)
+			enable_irq_wake(irq_eoc);
+		else
+			return ret;
+	} else {
+		device_init_wakeup(iadc->dev, 1);
+	}
+
+	ret = iadc_update_offset(iadc);
+	if (ret < 0) {
+		dev_err(dev, "failed offset calibration\n");
+		return ret;
+	}
+
+	indio_dev->dev.parent = dev;
+	indio_dev->dev.of_node = node;
+	indio_dev->name = pdev->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &iadc_info;
+	indio_dev->channels = iadc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(iadc_channels);
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id iadc_match_table[] = {
+	{ .compatible = "qcom,spmi-iadc" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, iadc_match_table);
+
+static struct platform_driver iadc_driver = {
+	.driver = {
+		   .name = "qcom-spmi-iadc",
+		   .of_match_table = iadc_match_table,
+	},
+	.probe = iadc_probe,
+};
+
+module_platform_driver(iadc_driver);
+
+MODULE_ALIAS("platform:qcom-spmi-iadc");
+MODULE_DESCRIPTION("Qualcomm SPMI PMIC current ADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");

drivers/iio/adc/rockchip_saradc.c

@@ -18,13 +18,13 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/regulator/consumer.h>
 #include <linux/iio/iio.h>
 
 #define SARADC_DATA			0x00
-#define SARADC_DATA_MASK		0x3ff
 
 #define SARADC_STAS			0x04
 #define SARADC_STAS_BUSY		BIT(0)
@@ -38,15 +38,22 @@
 #define SARADC_DLY_PU_SOC		0x0c
 #define SARADC_DLY_PU_SOC_MASK		0x3f
 
-#define SARADC_BITS			10
 #define SARADC_TIMEOUT			msecs_to_jiffies(100)
 
+struct rockchip_saradc_data {
+	int				num_bits;
+	const struct iio_chan_spec	*channels;
+	int				num_channels;
+	unsigned long			clk_rate;
+};
+
 struct rockchip_saradc {
 	void __iomem		*regs;
 	struct clk		*pclk;
 	struct clk		*clk;
 	struct completion	completion;
 	struct regulator	*vref;
+	const struct rockchip_saradc_data *data;
 	u16			last_val;
 };
 
@@ -90,7 +97,7 @@ static int rockchip_saradc_read_raw(struct iio_dev *indio_dev,
 		}
 
 		*val = ret / 1000;
-		*val2 = SARADC_BITS;
+		*val2 = info->data->num_bits;
 		return IIO_VAL_FRACTIONAL_LOG2;
 	default:
 		return -EINVAL;
@@ -103,7 +110,7 @@ static irqreturn_t rockchip_saradc_isr(int irq, void *dev_id)
 
 	/* Read value */
 	info->last_val = readl_relaxed(info->regs + SARADC_DATA);
-	info->last_val &= SARADC_DATA_MASK;
+	info->last_val &= GENMASK(info->data->num_bits - 1, 0);
 
 	/* Clear irq & power down adc */
 	writel_relaxed(0, info->regs + SARADC_CTRL);
@@ -133,12 +140,44 @@ static const struct iio_chan_spec rockchip_saradc_iio_channels[] = {
 	ADC_CHANNEL(2, "adc2"),
 };
 
+static const struct rockchip_saradc_data saradc_data = {
+	.num_bits = 10,
+	.channels = rockchip_saradc_iio_channels,
+	.num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels),
+	.clk_rate = 1000000,
+};
+
+static const struct iio_chan_spec rockchip_rk3066_tsadc_iio_channels[] = {
+	ADC_CHANNEL(0, "adc0"),
+	ADC_CHANNEL(1, "adc1"),
+};
+
+static const struct rockchip_saradc_data rk3066_tsadc_data = {
+	.num_bits = 12,
+	.channels = rockchip_rk3066_tsadc_iio_channels,
+	.num_channels = ARRAY_SIZE(rockchip_rk3066_tsadc_iio_channels),
+	.clk_rate = 50000,
+};
+
+static const struct of_device_id rockchip_saradc_match[] = {
+	{
+		.compatible = "rockchip,saradc",
+		.data = &saradc_data,
+	}, {
+		.compatible = "rockchip,rk3066-tsadc",
+		.data = &rk3066_tsadc_data,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
+
 static int rockchip_saradc_probe(struct platform_device *pdev)
 {
 	struct rockchip_saradc *info = NULL;
 	struct device_node *np = pdev->dev.of_node;
 	struct iio_dev *indio_dev = NULL;
 	struct resource	*mem;
+	const struct of_device_id *match;
 	int ret;
 	int irq;
 
@@ -152,6 +191,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	}
 	info = iio_priv(indio_dev);
 
+	match = of_match_device(rockchip_saradc_match, &pdev->dev);
+	info->data = match->data;
+
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	info->regs = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(info->regs))
@@ -192,10 +234,10 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	}
 
 	/*
-	 * Use a default of 1MHz for the converter clock.
+	 * Use a default value for the converter clock.
 	 * This may become user-configurable in the future.
 	 */
-	ret = clk_set_rate(info->clk, 1000000);
+	ret = clk_set_rate(info->clk, info->data->clk_rate);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to set adc clk rate, %d\n", ret);
 		return ret;
@@ -227,8 +269,8 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	indio_dev->info = &rockchip_saradc_iio_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	indio_dev->channels = rockchip_saradc_iio_channels;
+	indio_dev->channels = info->data->channels;
-	indio_dev->num_channels = ARRAY_SIZE(rockchip_saradc_iio_channels);
+	indio_dev->num_channels = info->data->num_channels;
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
@@ -296,12 +338,6 @@ static int rockchip_saradc_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(rockchip_saradc_pm_ops,
 			 rockchip_saradc_suspend, rockchip_saradc_resume);
 
-static const struct of_device_id rockchip_saradc_match[] = {
-	{ .compatible = "rockchip,saradc" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
-
 static struct platform_driver rockchip_saradc_driver = {
 	.probe		= rockchip_saradc_probe,
 	.remove		= rockchip_saradc_remove,

drivers/iio/adc/vf610_adc.c

@@ -91,7 +91,7 @@
 #define VF610_ADC_CAL			0x80
 
 /* Other field define */
-#define VF610_ADC_ADCHC(x)		((x) & 0xF)
+#define VF610_ADC_ADCHC(x)		((x) & 0x1F)
 #define VF610_ADC_AIEN			(0x1 << 7)
 #define VF610_ADC_CONV_DISABLE		0x1F
 #define VF610_ADC_HS_COCO0		0x1
@@ -153,6 +153,12 @@ struct vf610_adc {
 				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
 }
 
+#define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) {	\
+	.type = (_chan_type),	\
+	.channel = (_idx),		\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),	\
+}
+
 static const struct iio_chan_spec vf610_adc_iio_channels[] = {
 	VF610_ADC_CHAN(0, IIO_VOLTAGE),
 	VF610_ADC_CHAN(1, IIO_VOLTAGE),
@@ -170,6 +176,7 @@ static const struct iio_chan_spec vf610_adc_iio_channels[] = {
 	VF610_ADC_CHAN(13, IIO_VOLTAGE),
 	VF610_ADC_CHAN(14, IIO_VOLTAGE),
 	VF610_ADC_CHAN(15, IIO_VOLTAGE),
+	VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP),
 	/* sentinel */
 };
 
@@ -451,6 +458,7 @@ static int vf610_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
 		mutex_lock(&indio_dev->mlock);
 		reinit_completion(&info->completion);
 
@@ -468,7 +476,23 @@ static int vf610_read_raw(struct iio_dev *indio_dev,
 			return ret;
 		}
 
-		*val = info->value;
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			*val = info->value;
+			break;
+		case IIO_TEMP:
+			/*
+			* Calculate in degree Celsius times 1000
+			* Using sensor slope of 1.84 mV/°C and
+			* V at 25°C of 696 mV
+			*/
+			*val = 25000 - ((int)info->value - 864) * 1000000 / 1840;
+			break;
+		default:
+			mutex_unlock(&indio_dev->mlock);
+			return -EINVAL;
+		}
+
 		mutex_unlock(&indio_dev->mlock);
 		return IIO_VAL_INT;
 
@@ -569,9 +593,9 @@ static int vf610_adc_probe(struct platform_device *pdev)
 		return PTR_ERR(info->regs);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
+	if (irq < 0) {
 		dev_err(&pdev->dev, "no irq resource?\n");
-		return -EINVAL;
+		return irq;
 	}
 
 	ret = devm_request_irq(info->dev, irq,
@@ -586,8 +610,7 @@ static int vf610_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(info->clk)) {
 		dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
 						PTR_ERR(info->clk));
-		ret = PTR_ERR(info->clk);
+		return PTR_ERR(info->clk);
-		return ret;
 	}
 
 	info->vref = devm_regulator_get(&pdev->dev, "vref");
@@ -681,17 +704,19 @@ static int vf610_adc_resume(struct device *dev)
 
 	ret = clk_prepare_enable(info->clk);
 	if (ret)
-		return ret;
+		goto disable_reg;
 
 	vf610_adc_hw_init(info);
 
 	return 0;
+
+disable_reg:
+	regulator_disable(info->vref);
+	return ret;
 }
 #endif
 
-static SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops,
+static SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops, vf610_adc_suspend, vf610_adc_resume);
-			vf610_adc_suspend,
-			vf610_adc_resume);
 
 static struct platform_driver vf610_adc_driver = {
 	.probe          = vf610_adc_probe,

drivers/iio/common/st_sensors/st_sensors_core.c

@@ -44,18 +44,18 @@ st_sensors_write_data_with_mask_error:
 	return err;
 }
 
-static int st_sensors_match_odr(struct st_sensors *sensor,
+static int st_sensors_match_odr(struct st_sensor_settings *sensor_settings,
 			unsigned int odr, struct st_sensor_odr_avl *odr_out)
 {
 	int i, ret = -EINVAL;
 
 	for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) {
-		if (sensor->odr.odr_avl[i].hz == 0)
+		if (sensor_settings->odr.odr_avl[i].hz == 0)
 			goto st_sensors_match_odr_error;
 
-		if (sensor->odr.odr_avl[i].hz == odr) {
+		if (sensor_settings->odr.odr_avl[i].hz == odr) {
-			odr_out->hz = sensor->odr.odr_avl[i].hz;
+			odr_out->hz = sensor_settings->odr.odr_avl[i].hz;
-			odr_out->value = sensor->odr.odr_avl[i].value;
+			odr_out->value = sensor_settings->odr.odr_avl[i].value;
 			ret = 0;
 			break;
 		}
@@ -71,23 +71,26 @@ int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
 	struct st_sensor_odr_avl odr_out = {0, 0};
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
-	err = st_sensors_match_odr(sdata->sensor, odr, &odr_out);
+	err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
 	if (err < 0)
 		goto st_sensors_match_odr_error;
 
-	if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) &&
+	if ((sdata->sensor_settings->odr.addr ==
-			(sdata->sensor->odr.mask == sdata->sensor->pw.mask)) {
+					sdata->sensor_settings->pw.addr) &&
+				(sdata->sensor_settings->odr.mask ==
+					sdata->sensor_settings->pw.mask)) {
 		if (sdata->enabled == true) {
 			err = st_sensors_write_data_with_mask(indio_dev,
-				sdata->sensor->odr.addr,
+				sdata->sensor_settings->odr.addr,
-				sdata->sensor->odr.mask,
+				sdata->sensor_settings->odr.mask,
 				odr_out.value);
 		} else {
 			err = 0;
 		}
 	} else {
 		err = st_sensors_write_data_with_mask(indio_dev,
-			sdata->sensor->odr.addr, sdata->sensor->odr.mask,
+			sdata->sensor_settings->odr.addr,
+			sdata->sensor_settings->odr.mask,
 			odr_out.value);
 	}
 	if (err >= 0)
@@ -98,16 +101,16 @@ st_sensors_match_odr_error:
 }
 EXPORT_SYMBOL(st_sensors_set_odr);
 
-static int st_sensors_match_fs(struct st_sensors *sensor,
+static int st_sensors_match_fs(struct st_sensor_settings *sensor_settings,
 					unsigned int fs, int *index_fs_avl)
 {
 	int i, ret = -EINVAL;
 
 	for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
-		if (sensor->fs.fs_avl[i].num == 0)
+		if (sensor_settings->fs.fs_avl[i].num == 0)
 			goto st_sensors_match_odr_error;
 
-		if (sensor->fs.fs_avl[i].num == fs) {
+		if (sensor_settings->fs.fs_avl[i].num == fs) {
 			*index_fs_avl = i;
 			ret = 0;
 			break;
@@ -118,25 +121,24 @@ st_sensors_match_odr_error:
 	return ret;
 }
 
-static int st_sensors_set_fullscale(struct iio_dev *indio_dev,
+static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
-								unsigned int fs)
 {
 	int err, i = 0;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
-	err = st_sensors_match_fs(sdata->sensor, fs, &i);
+	err = st_sensors_match_fs(sdata->sensor_settings, fs, &i);
 	if (err < 0)
 		goto st_accel_set_fullscale_error;
 
 	err = st_sensors_write_data_with_mask(indio_dev,
-				sdata->sensor->fs.addr,
+				sdata->sensor_settings->fs.addr,
-				sdata->sensor->fs.mask,
+				sdata->sensor_settings->fs.mask,
-				sdata->sensor->fs.fs_avl[i].value);
+				sdata->sensor_settings->fs.fs_avl[i].value);
 	if (err < 0)
 		goto st_accel_set_fullscale_error;
 
 	sdata->current_fullscale = (struct st_sensor_fullscale_avl *)
-						&sdata->sensor->fs.fs_avl[i];
+					&sdata->sensor_settings->fs.fs_avl[i];
 	return err;
 
 st_accel_set_fullscale_error:
@@ -153,10 +155,12 @@ int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
 	if (enable) {
-		tmp_value = sdata->sensor->pw.value_on;
+		tmp_value = sdata->sensor_settings->pw.value_on;
-		if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) &&
+		if ((sdata->sensor_settings->odr.addr ==
-			(sdata->sensor->odr.mask == sdata->sensor->pw.mask)) {
+					sdata->sensor_settings->pw.addr) &&
-			err = st_sensors_match_odr(sdata->sensor,
+				(sdata->sensor_settings->odr.mask ==
+					sdata->sensor_settings->pw.mask)) {
+			err = st_sensors_match_odr(sdata->sensor_settings,
 							sdata->odr, &odr_out);
 			if (err < 0)
 				goto set_enable_error;
@@ -164,8 +168,8 @@ int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
 			found = true;
 		}
 		err = st_sensors_write_data_with_mask(indio_dev,
-				sdata->sensor->pw.addr,
+				sdata->sensor_settings->pw.addr,
-				sdata->sensor->pw.mask, tmp_value);
+				sdata->sensor_settings->pw.mask, tmp_value);
 		if (err < 0)
 			goto set_enable_error;
 
@@ -175,9 +179,9 @@ int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
 			sdata->odr = odr_out.hz;
 	} else {
 		err = st_sensors_write_data_with_mask(indio_dev,
-				sdata->sensor->pw.addr,
+				sdata->sensor_settings->pw.addr,
-				sdata->sensor->pw.mask,
+				sdata->sensor_settings->pw.mask,
-				sdata->sensor->pw.value_off);
+				sdata->sensor_settings->pw.value_off);
 		if (err < 0)
 			goto set_enable_error;
 
@@ -194,8 +198,9 @@ int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable)
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
 	return st_sensors_write_data_with_mask(indio_dev,
-				sdata->sensor->enable_axis.addr,
+				sdata->sensor_settings->enable_axis.addr,
-				sdata->sensor->enable_axis.mask, axis_enable);
+				sdata->sensor_settings->enable_axis.mask,
+				axis_enable);
 }
 EXPORT_SYMBOL(st_sensors_set_axis_enable);
 
@@ -236,13 +241,13 @@ void st_sensors_power_disable(struct iio_dev *indio_dev)
 EXPORT_SYMBOL(st_sensors_power_disable);
 
 static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
-				       struct st_sensors_platform_data *pdata)
+					struct st_sensors_platform_data *pdata)
 {
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
 	switch (pdata->drdy_int_pin) {
 	case 1:
-		if (sdata->sensor->drdy_irq.mask_int1 == 0) {
+		if (sdata->sensor_settings->drdy_irq.mask_int1 == 0) {
 			dev_err(&indio_dev->dev,
 					"DRDY on INT1 not available.\n");
 			return -EINVAL;
@@ -250,7 +255,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 		sdata->drdy_int_pin = 1;
 		break;
 	case 2:
-		if (sdata->sensor->drdy_irq.mask_int2 == 0) {
+		if (sdata->sensor_settings->drdy_irq.mask_int2 == 0) {
 			dev_err(&indio_dev->dev,
 					"DRDY on INT2 not available.\n");
 			return -EINVAL;
@@ -318,7 +323,7 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
 
 	if (sdata->current_fullscale) {
 		err = st_sensors_set_fullscale(indio_dev,
-					       sdata->current_fullscale->num);
+						sdata->current_fullscale->num);
 		if (err < 0)
 			return err;
 	} else
@@ -330,7 +335,8 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
 
 	/* set BDU */
 	err = st_sensors_write_data_with_mask(indio_dev,
-			sdata->sensor->bdu.addr, sdata->sensor->bdu.mask, true);
+					sdata->sensor_settings->bdu.addr,
+					sdata->sensor_settings->bdu.mask, true);
 	if (err < 0)
 		return err;
 
@@ -346,26 +352,28 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
 	u8 drdy_mask;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
-	if (!sdata->sensor->drdy_irq.addr)
+	if (!sdata->sensor_settings->drdy_irq.addr)
 		return 0;
 
 	/* Enable/Disable the interrupt generator 1. */
-	if (sdata->sensor->drdy_irq.ig1.en_addr > 0) {
+	if (sdata->sensor_settings->drdy_irq.ig1.en_addr > 0) {
 		err = st_sensors_write_data_with_mask(indio_dev,
-			sdata->sensor->drdy_irq.ig1.en_addr,
+				sdata->sensor_settings->drdy_irq.ig1.en_addr,
-			sdata->sensor->drdy_irq.ig1.en_mask, (int)enable);
+				sdata->sensor_settings->drdy_irq.ig1.en_mask,
+				(int)enable);
 		if (err < 0)
 			goto st_accel_set_dataready_irq_error;
 	}
 
 	if (sdata->drdy_int_pin == 1)
-		drdy_mask = sdata->sensor->drdy_irq.mask_int1;
+		drdy_mask = sdata->sensor_settings->drdy_irq.mask_int1;
 	else
-		drdy_mask = sdata->sensor->drdy_irq.mask_int2;
+		drdy_mask = sdata->sensor_settings->drdy_irq.mask_int2;
 
 	/* Enable/Disable the interrupt generator for data ready. */
 	err = st_sensors_write_data_with_mask(indio_dev,
-			sdata->sensor->drdy_irq.addr, drdy_mask, (int)enable);
+					sdata->sensor_settings->drdy_irq.addr,
+					drdy_mask, (int)enable);
 
 st_accel_set_dataready_irq_error:
 	return err;
@@ -378,8 +386,8 @@ int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale)
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
 	for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
-		if ((sdata->sensor->fs.fs_avl[i].gain == scale) &&
+		if ((sdata->sensor_settings->fs.fs_avl[i].gain == scale) &&
-				(sdata->sensor->fs.fs_avl[i].gain != 0)) {
+				(sdata->sensor_settings->fs.fs_avl[i].gain != 0)) {
 			err = 0;
 			break;
 		}
@@ -388,7 +396,7 @@ int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale)
 		goto st_sensors_match_scale_error;
 
 	err = st_sensors_set_fullscale(indio_dev,
-					sdata->sensor->fs.fs_avl[i].num);
+				sdata->sensor_settings->fs.fs_avl[i].num);
 
 st_sensors_match_scale_error:
 	return err;
@@ -439,7 +447,7 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 		if (err < 0)
 			goto out;
 
-		msleep((sdata->sensor->bootime * 1000) / sdata->odr);
+		msleep((sdata->sensor_settings->bootime * 1000) / sdata->odr);
 		err = st_sensors_read_axis_data(indio_dev, ch, val);
 		if (err < 0)
 			goto out;
@@ -456,7 +464,8 @@ out:
 EXPORT_SYMBOL(st_sensors_read_info_raw);
 
 int st_sensors_check_device_support(struct iio_dev *indio_dev,
-			int num_sensors_list, const struct st_sensors *sensors)
+			int num_sensors_list,
+			const struct st_sensor_settings *sensor_settings)
 {
 	u8 wai;
 	int i, n, err;
@@ -470,23 +479,24 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
 	}
 
 	for (i = 0; i < num_sensors_list; i++) {
-		if (sensors[i].wai == wai)
+		if (sensor_settings[i].wai == wai)
 			break;
 	}
 	if (i == num_sensors_list)
 		goto device_not_supported;
 
-	for (n = 0; n < ARRAY_SIZE(sensors[i].sensors_supported); n++) {
+	for (n = 0; n < ARRAY_SIZE(sensor_settings[i].sensors_supported); n++) {
 		if (strcmp(indio_dev->name,
-				&sensors[i].sensors_supported[n][0]) == 0)
+				&sensor_settings[i].sensors_supported[n][0]) == 0)
 			break;
 	}
-	if (n == ARRAY_SIZE(sensors[i].sensors_supported)) {
+	if (n == ARRAY_SIZE(sensor_settings[i].sensors_supported)) {
 		dev_err(&indio_dev->dev, "device name and WhoAmI mismatch.\n");
 		goto sensor_name_mismatch;
 	}
 
-	sdata->sensor = (struct st_sensors *)&sensors[i];
+	sdata->sensor_settings =
+			(struct st_sensor_settings *)&sensor_settings[i];
 
 	return i;
 
@@ -508,11 +518,11 @@ ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
 
 	mutex_lock(&indio_dev->mlock);
 	for (i = 0; i < ST_SENSORS_ODR_LIST_MAX; i++) {
-		if (sdata->sensor->odr.odr_avl[i].hz == 0)
+		if (sdata->sensor_settings->odr.odr_avl[i].hz == 0)
 			break;
 
 		len += scnprintf(buf + len, PAGE_SIZE - len, "%d ",
-					sdata->sensor->odr.odr_avl[i].hz);
+				sdata->sensor_settings->odr.odr_avl[i].hz);
 	}
 	mutex_unlock(&indio_dev->mlock);
 	buf[len - 1] = '\n';
@@ -530,11 +540,11 @@ ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
 
 	mutex_lock(&indio_dev->mlock);
 	for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
-		if (sdata->sensor->fs.fs_avl[i].num == 0)
+		if (sdata->sensor_settings->fs.fs_avl[i].num == 0)
 			break;
 
 		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
-					sdata->sensor->fs.fs_avl[i].gain);
+				sdata->sensor_settings->fs.fs_avl[i].gain);
 	}
 	mutex_unlock(&indio_dev->mlock);
 	buf[len - 1] = '\n';

drivers/iio/common/st_sensors/st_sensors_i2c.c

@@ -72,6 +72,7 @@ void st_sensors_i2c_configure(struct iio_dev *indio_dev,
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->name = client->name;
 
+	sdata->dev = &client->dev;
 	sdata->tf = &st_sensors_tf_i2c;
 	sdata->get_irq_data_ready = st_sensors_i2c_get_irq;
 }

drivers/iio/common/st_sensors/st_sensors_spi.c

@@ -111,6 +111,7 @@ void st_sensors_spi_configure(struct iio_dev *indio_dev,
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->name = spi->modalias;
 
+	sdata->dev = &spi->dev;
 	sdata->tf = &st_sensors_tf_spi;
 	sdata->get_irq_data_ready = st_sensors_spi_get_irq;
 }

drivers/iio/gyro/st_gyro.h

@@ -30,8 +30,7 @@ static const struct st_sensors_platform_data gyro_pdata = {
 	.drdy_int_pin = 2,
 };
 
-int st_gyro_common_probe(struct iio_dev *indio_dev,
+int st_gyro_common_probe(struct iio_dev *indio_dev);
-					struct st_sensors_platform_data *pdata);
 void st_gyro_common_remove(struct iio_dev *indio_dev);
 
 #ifdef CONFIG_IIO_BUFFER

drivers/iio/gyro/st_gyro_core.c

@@ -103,7 +103,7 @@ static const struct iio_chan_spec st_gyro_16bit_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
-static const struct st_sensors st_gyro_sensors[] = {
+static const struct st_sensor_settings st_gyro_sensors_settings[] = {
 	{
 		.wai = ST_GYRO_1_WAI_EXP,
 		.sensors_supported = {
@@ -309,8 +309,7 @@ static const struct iio_trigger_ops st_gyro_trigger_ops = {
 #define ST_GYRO_TRIGGER_OPS NULL
 #endif
 
-int st_gyro_common_probe(struct iio_dev *indio_dev,
+int st_gyro_common_probe(struct iio_dev *indio_dev)
-					struct st_sensors_platform_data *pdata)
 {
 	struct st_sensor_data *gdata = iio_priv(indio_dev);
 	int irq = gdata->get_irq_data_ready(indio_dev);
@@ -322,20 +321,22 @@ int st_gyro_common_probe(struct iio_dev *indio_dev,
 	st_sensors_power_enable(indio_dev);
 
 	err = st_sensors_check_device_support(indio_dev,
-				ARRAY_SIZE(st_gyro_sensors), st_gyro_sensors);
+					ARRAY_SIZE(st_gyro_sensors_settings),
+					st_gyro_sensors_settings);
 	if (err < 0)
 		return err;
 
 	gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
-	gdata->multiread_bit = gdata->sensor->multi_read_bit;
+	gdata->multiread_bit = gdata->sensor_settings->multi_read_bit;
-	indio_dev->channels = gdata->sensor->ch;
+	indio_dev->channels = gdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
 	gdata->current_fullscale = (struct st_sensor_fullscale_avl *)
-						&gdata->sensor->fs.fs_avl[0];
+					&gdata->sensor_settings->fs.fs_avl[0];
-	gdata->odr = gdata->sensor->odr.odr_avl[0].hz;
+	gdata->odr = gdata->sensor_settings->odr.odr_avl[0].hz;
 
-	err = st_sensors_init_sensor(indio_dev, pdata);
+	err = st_sensors_init_sensor(indio_dev,
+				(struct st_sensors_platform_data *)&gyro_pdata);
 	if (err < 0)
 		return err;
 

drivers/iio/gyro/st_gyro_i2c.c

@@ -67,13 +67,11 @@ static int st_gyro_i2c_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	gdata = iio_priv(indio_dev);
-	gdata->dev = &client->dev;
 	st_sensors_of_i2c_probe(client, st_gyro_of_match);
 
 	st_sensors_i2c_configure(indio_dev, client, gdata);
 
-	err = st_gyro_common_probe(indio_dev,
+	err = st_gyro_common_probe(indio_dev);
-				(struct st_sensors_platform_data *)&gyro_pdata);
 	if (err < 0)
 		return err;
 

drivers/iio/gyro/st_gyro_spi.c

@@ -29,12 +29,10 @@ static int st_gyro_spi_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	gdata = iio_priv(indio_dev);
-	gdata->dev = &spi->dev;
 
 	st_sensors_spi_configure(indio_dev, spi, gdata);
 
-	err = st_gyro_common_probe(indio_dev,
+	err = st_gyro_common_probe(indio_dev);
-				(struct st_sensors_platform_data *)&gyro_pdata);
 	if (err < 0)
 		return err;
 

drivers/iio/humidity/Kconfig

@@ -22,4 +22,14 @@ config SI7005
 	  To compile this driver as a module, choose M here: the module
 	  will be called si7005.
 
+config SI7020
+	tristate "Si7013/20/21 Relative Humidity and Temperature Sensors"
+	depends on I2C
+	help
+	  Say yes here to build support for the Silicon Labs Si7013/20/21
+	  Relative Humidity and Temperature Sensors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called si7020.
+
 endmenu

drivers/iio/humidity/Makefile

@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_DHT11) += dht11.o
 obj-$(CONFIG_SI7005) += si7005.o
+obj-$(CONFIG_SI7020) += si7020.o

drivers/iio/humidity/si7020.c

@@ -0,0 +1,161 @@
+/*
+ * si7020.c - Silicon Labs Si7013/20/21 Relative Humidity and Temp Sensors
+ * Copyright (c) 2013,2014  Uplogix, Inc.
+ * David Barksdale <dbarksdale@uplogix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * The Silicon Labs Si7013/20/21 Relative Humidity and Temperature Sensors
+ * are i2c devices which have an identical programming interface for
+ * measuring relative humidity and temperature. The Si7013 has an additional
+ * temperature input which this driver does not support.
+ *
+ * Data Sheets:
+ *   Si7013: http://www.silabs.com/Support%20Documents/TechnicalDocs/Si7013.pdf
+ *   Si7020: http://www.silabs.com/Support%20Documents/TechnicalDocs/Si7020.pdf
+ *   Si7021: http://www.silabs.com/Support%20Documents/TechnicalDocs/Si7021.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* Measure Relative Humidity, Hold Master Mode */
+#define SI7020CMD_RH_HOLD	0xE5
+/* Measure Temperature, Hold Master Mode */
+#define SI7020CMD_TEMP_HOLD	0xE3
+/* Software Reset */
+#define SI7020CMD_RESET		0xFE
+
+static int si7020_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan, int *val,
+			   int *val2, long mask)
+{
+	struct i2c_client *client = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = i2c_smbus_read_word_data(client,
+					       chan->type == IIO_TEMP ?
+					       SI7020CMD_TEMP_HOLD :
+					       SI7020CMD_RH_HOLD);
+		if (ret < 0)
+			return ret;
+		*val = ret >> 2;
+		if (chan->type == IIO_HUMIDITYRELATIVE)
+			*val &= GENMASK(11, 0);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type == IIO_TEMP)
+			*val = 175720; /* = 175.72 * 1000 */
+		else
+			*val = 125 * 1000;
+		*val2 = 65536 >> 2;
+		return IIO_VAL_FRACTIONAL;
+	case IIO_CHAN_INFO_OFFSET:
+		/*
+		 * Since iio_convert_raw_to_processed_unlocked assumes offset
+		 * is an integer we have to round these values and lose
+		 * accuracy.
+		 * Relative humidity will be 0.0032959% too high and
+		 * temperature will be 0.00277344 degrees too high.
+		 * This is no big deal because it's within the accuracy of the
+		 * sensor.
+		 */
+		if (chan->type == IIO_TEMP)
+			*val = -4368; /* = -46.85 * (65536 >> 2) / 175.72 */
+		else
+			*val = -786; /* = -6 * (65536 >> 2) / 125 */
+		return IIO_VAL_INT;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_chan_spec si7020_channels[] = {
+	{
+		.type = IIO_HUMIDITYRELATIVE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+	}
+};
+
+static const struct iio_info si7020_info = {
+	.read_raw = si7020_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int si7020_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct i2c_client **data;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WRITE_BYTE |
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -ENODEV;
+
+	/* Reset device, loads default settings. */
+	ret = i2c_smbus_write_byte(client, SI7020CMD_RESET);
+	if (ret < 0)
+		return ret;
+	/* Wait the maximum power-up time after software reset. */
+	msleep(15);
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*client));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	*data = client;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = dev_name(&client->dev);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &si7020_info;
+	indio_dev->channels = si7020_channels;
+	indio_dev->num_channels = ARRAY_SIZE(si7020_channels);
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id si7020_id[] = {
+	{ "si7020", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, si7020_id);
+
+static struct i2c_driver si7020_driver = {
+	.driver.name	= "si7020",
+	.probe		= si7020_probe,
+	.id_table	= si7020_id,
+};
+
+module_i2c_driver(si7020_driver);
+MODULE_DESCRIPTION("Silicon Labs Si7013/20/21 Relative Humidity and Temperature Sensors");
+MODULE_AUTHOR("David Barksdale <dbarksdale@uplogix.com>");
+MODULE_LICENSE("GPL");

drivers/iio/inkern.c

@@ -100,6 +100,28 @@ static int iio_dev_node_match(struct device *dev, void *data)
 	return dev->of_node == data && dev->type == &iio_device_type;
 }
 
+/**
+ * __of_iio_simple_xlate - translate iiospec to the IIO channel index
+ * @indio_dev:	pointer to the iio_dev structure
+ * @iiospec:	IIO specifier as found in the device tree
+ *
+ * This is simple translation function, suitable for the most 1:1 mapped
+ * channels in IIO chips. This function performs only one sanity check:
+ * whether IIO index is less than num_channels (that is specified in the
+ * iio_dev).
+ */
+static int __of_iio_simple_xlate(struct iio_dev *indio_dev,
+				const struct of_phandle_args *iiospec)
+{
+	if (!iiospec->args_count)
+		return 0;
+
+	if (iiospec->args[0] >= indio_dev->num_channels)
+		return -EINVAL;
+
+	return iiospec->args[0];
+}
+
 static int __of_iio_channel_get(struct iio_channel *channel,
 				struct device_node *np, int index)
 {
@@ -122,18 +144,19 @@ static int __of_iio_channel_get(struct iio_channel *channel,
 
 	indio_dev = dev_to_iio_dev(idev);
 	channel->indio_dev = indio_dev;
-	index = iiospec.args_count ? iiospec.args[0] : 0;
+	if (indio_dev->info->of_xlate)
-	if (index >= indio_dev->num_channels) {
+		index = indio_dev->info->of_xlate(indio_dev, &iiospec);
-		err = -EINVAL;
+	else
+		index = __of_iio_simple_xlate(indio_dev, &iiospec);
+	if (index < 0)
 		goto err_put;
-	}
 	channel->channel = &indio_dev->channels[index];
 
 	return 0;
 
 err_put:
 	iio_device_put(indio_dev);
-	return err;
+	return index;
 }
 
 static struct iio_channel *of_iio_channel_get(struct device_node *np, int index)

drivers/iio/magnetometer/st_magn.h

@@ -18,8 +18,7 @@
 #define LSM303DLM_MAGN_DEV_NAME		"lsm303dlm_magn"
 #define LIS3MDL_MAGN_DEV_NAME		"lis3mdl"
 
-int st_magn_common_probe(struct iio_dev *indio_dev,
+int st_magn_common_probe(struct iio_dev *indio_dev);
-					struct st_sensors_platform_data *pdata);
 void st_magn_common_remove(struct iio_dev *indio_dev);
 
 #ifdef CONFIG_IIO_BUFFER

drivers/iio/magnetometer/st_magn_core.c

@@ -149,7 +149,7 @@ static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
-static const struct st_sensors st_magn_sensors[] = {
+static const struct st_sensor_settings st_magn_sensors_settings[] = {
 	{
 		.wai = ST_MAGN_1_WAI_EXP,
 		.sensors_supported = {
@@ -361,8 +361,7 @@ static const struct iio_info magn_info = {
 	.write_raw = &st_magn_write_raw,
 };
 
-int st_magn_common_probe(struct iio_dev *indio_dev,
+int st_magn_common_probe(struct iio_dev *indio_dev)
-					struct st_sensors_platform_data *pdata)
 {
 	struct st_sensor_data *mdata = iio_priv(indio_dev);
 	int irq = mdata->get_irq_data_ready(indio_dev);
@@ -374,20 +373,21 @@ int st_magn_common_probe(struct iio_dev *indio_dev,
 	st_sensors_power_enable(indio_dev);
 
 	err = st_sensors_check_device_support(indio_dev,
-				ARRAY_SIZE(st_magn_sensors), st_magn_sensors);
+					ARRAY_SIZE(st_magn_sensors_settings),
+					st_magn_sensors_settings);
 	if (err < 0)
 		return err;
 
 	mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
-	mdata->multiread_bit = mdata->sensor->multi_read_bit;
+	mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
-	indio_dev->channels = mdata->sensor->ch;
+	indio_dev->channels = mdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
 	mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
-						&mdata->sensor->fs.fs_avl[0];
+					&mdata->sensor_settings->fs.fs_avl[0];
-	mdata->odr = mdata->sensor->odr.odr_avl[0].hz;
+	mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz;
 
-	err = st_sensors_init_sensor(indio_dev, pdata);
+	err = st_sensors_init_sensor(indio_dev, NULL);
 	if (err < 0)
 		return err;
 

drivers/iio/magnetometer/st_magn_i2c.c

@@ -51,12 +51,11 @@ static int st_magn_i2c_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	mdata = iio_priv(indio_dev);
-	mdata->dev = &client->dev;
 	st_sensors_of_i2c_probe(client, st_magn_of_match);
 
 	st_sensors_i2c_configure(indio_dev, client, mdata);
 
-	err = st_magn_common_probe(indio_dev, NULL);
+	err = st_magn_common_probe(indio_dev);
 	if (err < 0)
 		return err;
 

drivers/iio/magnetometer/st_magn_spi.c

@@ -29,11 +29,10 @@ static int st_magn_spi_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	mdata = iio_priv(indio_dev);
-	mdata->dev = &spi->dev;
 
 	st_sensors_spi_configure(indio_dev, spi, mdata);
 
-	err = st_magn_common_probe(indio_dev, NULL);
+	err = st_magn_common_probe(indio_dev);
 	if (err < 0)
 		return err;
 

drivers/iio/pressure/Kconfig

@@ -5,6 +5,17 @@
 
 menu "Pressure sensors"
 
+config BMP280
+	tristate "Bosch Sensortec BMP280 pressure sensor driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	 Say yes here to build support for Bosch Sensortec BMP280
+	 pressure and temperature sensor.
+
+	 To compile this driver as a module, choose M here: the module
+	 will be called bmp280.
+
 config HID_SENSOR_PRESS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER

drivers/iio/pressure/Makefile

@@ -3,6 +3,7 @@
 #
 
 # When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_BMP280) += bmp280.o
 obj-$(CONFIG_HID_SENSOR_PRESS)   += hid-sensor-press.o
 obj-$(CONFIG_MPL115) += mpl115.o
 obj-$(CONFIG_MPL3115) += mpl3115.o

drivers/iio/pressure/bmp280.c

@@ -0,0 +1,455 @@
+/*
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Driver for Bosch Sensortec BMP280 digital pressure sensor.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) "bmp280: " fmt
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define BMP280_REG_TEMP_XLSB		0xFC
+#define BMP280_REG_TEMP_LSB		0xFB
+#define BMP280_REG_TEMP_MSB		0xFA
+#define BMP280_REG_PRESS_XLSB		0xF9
+#define BMP280_REG_PRESS_LSB		0xF8
+#define BMP280_REG_PRESS_MSB		0xF7
+
+#define BMP280_REG_CONFIG		0xF5
+#define BMP280_REG_CTRL_MEAS		0xF4
+#define BMP280_REG_STATUS		0xF3
+#define BMP280_REG_RESET		0xE0
+#define BMP280_REG_ID			0xD0
+
+#define BMP280_REG_COMP_TEMP_START	0x88
+#define BMP280_COMP_TEMP_REG_COUNT	6
+
+#define BMP280_REG_COMP_PRESS_START	0x8E
+#define BMP280_COMP_PRESS_REG_COUNT	18
+
+#define BMP280_FILTER_MASK		(BIT(4) | BIT(3) | BIT(2))
+#define BMP280_FILTER_OFF		0
+#define BMP280_FILTER_2X		BIT(2)
+#define BMP280_FILTER_4X		BIT(3)
+#define BMP280_FILTER_8X		(BIT(3) | BIT(2))
+#define BMP280_FILTER_16X		BIT(4)
+
+#define BMP280_OSRS_TEMP_MASK		(BIT(7) | BIT(6) | BIT(5))
+#define BMP280_OSRS_TEMP_SKIP		0
+#define BMP280_OSRS_TEMP_1X		BIT(5)
+#define BMP280_OSRS_TEMP_2X		BIT(6)
+#define BMP280_OSRS_TEMP_4X		(BIT(6) | BIT(5))
+#define BMP280_OSRS_TEMP_8X		BIT(7)
+#define BMP280_OSRS_TEMP_16X		(BIT(7) | BIT(5))
+
+#define BMP280_OSRS_PRESS_MASK		(BIT(4) | BIT(3) | BIT(2))
+#define BMP280_OSRS_PRESS_SKIP		0
+#define BMP280_OSRS_PRESS_1X		BIT(2)
+#define BMP280_OSRS_PRESS_2X		BIT(3)
+#define BMP280_OSRS_PRESS_4X		(BIT(3) | BIT(2))
+#define BMP280_OSRS_PRESS_8X		BIT(4)
+#define BMP280_OSRS_PRESS_16X		(BIT(4) | BIT(2))
+
+#define BMP280_MODE_MASK		(BIT(1) | BIT(0))
+#define BMP280_MODE_SLEEP		0
+#define BMP280_MODE_FORCED		BIT(0)
+#define BMP280_MODE_NORMAL		(BIT(1) | BIT(0))
+
+#define BMP280_CHIP_ID			0x58
+#define BMP280_SOFT_RESET_VAL		0xB6
+
+struct bmp280_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	struct regmap *regmap;
+
+	/*
+	 * Carryover value from temperature conversion, used in pressure
+	 * calculation.
+	 */
+	s32 t_fine;
+};
+
+/* Compensation parameters. */
+struct bmp280_comp_temp {
+	u16 dig_t1;
+	s16 dig_t2, dig_t3;
+};
+
+struct bmp280_comp_press {
+	u16 dig_p1;
+	s16 dig_p2, dig_p3, dig_p4, dig_p5, dig_p6, dig_p7, dig_p8, dig_p9;
+};
+
+static const struct iio_chan_spec bmp280_channels[] = {
+	{
+		.type = IIO_PRESSURE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+	},
+};
+
+static bool bmp280_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BMP280_REG_CONFIG:
+	case BMP280_REG_CTRL_MEAS:
+	case BMP280_REG_RESET:
+		return true;
+	default:
+		return false;
+	};
+}
+
+static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BMP280_REG_TEMP_XLSB:
+	case BMP280_REG_TEMP_LSB:
+	case BMP280_REG_TEMP_MSB:
+	case BMP280_REG_PRESS_XLSB:
+	case BMP280_REG_PRESS_LSB:
+	case BMP280_REG_PRESS_MSB:
+	case BMP280_REG_STATUS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config bmp280_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = BMP280_REG_TEMP_XLSB,
+	.cache_type = REGCACHE_RBTREE,
+
+	.writeable_reg = bmp280_is_writeable_reg,
+	.volatile_reg = bmp280_is_volatile_reg,
+};
+
+static int bmp280_read_compensation_temp(struct bmp280_data *data,
+					 struct bmp280_comp_temp *comp)
+{
+	int ret;
+	__le16 buf[BMP280_COMP_TEMP_REG_COUNT / 2];
+
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START,
+			       buf, BMP280_COMP_TEMP_REG_COUNT);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"failed to read temperature calibration parameters\n");
+		return ret;
+	}
+
+	comp->dig_t1 = (u16) le16_to_cpu(buf[0]);
+	comp->dig_t2 = (s16) le16_to_cpu(buf[1]);
+	comp->dig_t3 = (s16) le16_to_cpu(buf[2]);
+
+	return 0;
+}
+
+static int bmp280_read_compensation_press(struct bmp280_data *data,
+					  struct bmp280_comp_press *comp)
+{
+	int ret;
+	__le16 buf[BMP280_COMP_PRESS_REG_COUNT / 2];
+
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START,
+			       buf, BMP280_COMP_PRESS_REG_COUNT);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"failed to read pressure calibration parameters\n");
+		return ret;
+	}
+
+	comp->dig_p1 = (u16) le16_to_cpu(buf[0]);
+	comp->dig_p2 = (s16) le16_to_cpu(buf[1]);
+	comp->dig_p3 = (s16) le16_to_cpu(buf[2]);
+	comp->dig_p4 = (s16) le16_to_cpu(buf[3]);
+	comp->dig_p5 = (s16) le16_to_cpu(buf[4]);
+	comp->dig_p6 = (s16) le16_to_cpu(buf[5]);
+	comp->dig_p7 = (s16) le16_to_cpu(buf[6]);
+	comp->dig_p8 = (s16) le16_to_cpu(buf[7]);
+	comp->dig_p9 = (s16) le16_to_cpu(buf[8]);
+
+	return 0;
+}
+
+/*
+ * Returns temperature in DegC, resolution is 0.01 DegC.  Output value of
+ * "5123" equals 51.23 DegC.  t_fine carries fine temperature as global
+ * value.
+ *
+ * Taken from datasheet, Section 3.11.3, "Compensation formula".
+ */
+static s32 bmp280_compensate_temp(struct bmp280_data *data,
+				  struct bmp280_comp_temp *comp,
+				  s32 adc_temp)
+{
+	s32 var1, var2, t;
+
+	var1 = (((adc_temp >> 3) - ((s32) comp->dig_t1 << 1)) *
+		((s32) comp->dig_t2)) >> 11;
+	var2 = (((((adc_temp >> 4) - ((s32) comp->dig_t1)) *
+		  ((adc_temp >> 4) - ((s32) comp->dig_t1))) >> 12) *
+		((s32) comp->dig_t3)) >> 14;
+
+	data->t_fine = var1 + var2;
+	t = (data->t_fine * 5 + 128) >> 8;
+
+	return t;
+}
+
+/*
+ * Returns pressure in Pa as unsigned 32 bit integer in Q24.8 format (24
+ * integer bits and 8 fractional bits).  Output value of "24674867"
+ * represents 24674867/256 = 96386.2 Pa = 963.862 hPa
+ *
+ * Taken from datasheet, Section 3.11.3, "Compensation formula".
+ */
+static u32 bmp280_compensate_press(struct bmp280_data *data,
+				   struct bmp280_comp_press *comp,
+				   s32 adc_press)
+{
+	s64 var1, var2, p;
+
+	var1 = ((s64) data->t_fine) - 128000;
+	var2 = var1 * var1 * (s64) comp->dig_p6;
+	var2 = var2 + ((var1 * (s64) comp->dig_p5) << 17);
+	var2 = var2 + (((s64) comp->dig_p4) << 35);
+	var1 = ((var1 * var1 * (s64) comp->dig_p3) >> 8) +
+		((var1 * (s64) comp->dig_p2) << 12);
+	var1 = (((((s64) 1) << 47) + var1)) * ((s64) comp->dig_p1) >> 33;
+
+	if (var1 == 0)
+		return 0;
+
+	p = ((((s64) 1048576 - adc_press) << 31) - var2) * 3125;
+	p = div64_s64(p, var1);
+	var1 = (((s64) comp->dig_p9) * (p >> 13) * (p >> 13)) >> 25;
+	var2 = (((s64) comp->dig_p8) * p) >> 19;
+	p = ((p + var1 + var2) >> 8) + (((s64) comp->dig_p7) << 4);
+
+	return (u32) p;
+}
+
+static int bmp280_read_temp(struct bmp280_data *data,
+			    int *val)
+{
+	int ret;
+	__be32 tmp = 0;
+	s32 adc_temp, comp_temp;
+	struct bmp280_comp_temp comp;
+
+	ret = bmp280_read_compensation_temp(data, &comp);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
+			       (u8 *) &tmp, 3);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "failed to read temperature\n");
+		return ret;
+	}
+
+	adc_temp = be32_to_cpu(tmp) >> 12;
+	comp_temp = bmp280_compensate_temp(data, &comp, adc_temp);
+
+	/*
+	 * val might be NULL if we're called by the read_press routine,
+	 * who only cares about the carry over t_fine value.
+	 */
+	if (val) {
+		*val = comp_temp * 10;
+		return IIO_VAL_INT;
+	}
+
+	return 0;
+}
+
+static int bmp280_read_press(struct bmp280_data *data,
+			     int *val, int *val2)
+{
+	int ret;
+	__be32 tmp = 0;
+	s32 adc_press;
+	u32 comp_press;
+	struct bmp280_comp_press comp;
+
+	ret = bmp280_read_compensation_press(data, &comp);
+	if (ret < 0)
+		return ret;
+
+	/* Read and compensate temperature so we get a reading of t_fine. */
+	ret = bmp280_read_temp(data, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
+			       (u8 *) &tmp, 3);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "failed to read pressure\n");
+		return ret;
+	}
+
+	adc_press = be32_to_cpu(tmp) >> 12;
+	comp_press = bmp280_compensate_press(data, &comp, adc_press);
+
+	*val = comp_press;
+	*val2 = 256000;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int bmp280_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	int ret;
+	struct bmp280_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_PRESSURE:
+			ret = bmp280_read_press(data, val, val2);
+			break;
+		case IIO_TEMP:
+			ret = bmp280_read_temp(data, val);
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static const struct iio_info bmp280_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &bmp280_read_raw,
+};
+
+static int bmp280_chip_init(struct bmp280_data *data)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS,
+				 BMP280_OSRS_TEMP_MASK |
+				 BMP280_OSRS_PRESS_MASK |
+				 BMP280_MODE_MASK,
+				 BMP280_OSRS_TEMP_2X |
+				 BMP280_OSRS_PRESS_16X |
+				 BMP280_MODE_NORMAL);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"failed to write config register\n");
+		return ret;
+	}
+
+	ret = regmap_update_bits(data->regmap, BMP280_REG_CONFIG,
+				 BMP280_FILTER_MASK,
+				 BMP280_FILTER_4X);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"failed to write config register\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static int bmp280_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int ret;
+	struct iio_dev *indio_dev;
+	struct bmp280_data *data;
+	unsigned int chip_id;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, indio_dev);
+	data = iio_priv(indio_dev);
+	mutex_init(&data->lock);
+	data->client = client;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = id->name;
+	indio_dev->channels = bmp280_channels;
+	indio_dev->num_channels = ARRAY_SIZE(bmp280_channels);
+	indio_dev->info = &bmp280_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	data->regmap = devm_regmap_init_i2c(client, &bmp280_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&client->dev, "failed to allocate register map\n");
+		return PTR_ERR(data->regmap);
+	}
+
+	ret = regmap_read(data->regmap, BMP280_REG_ID, &chip_id);
+	if (ret < 0)
+		return ret;
+	if (chip_id != BMP280_CHIP_ID) {
+		dev_err(&client->dev, "bad chip id.  expected %x got %x\n",
+			BMP280_CHIP_ID, chip_id);
+		return -EINVAL;
+	}
+
+	ret = bmp280_chip_init(data);
+	if (ret < 0)
+		return ret;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct acpi_device_id bmp280_acpi_match[] = {
+	{"BMP0280", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match);
+
+static const struct i2c_device_id bmp280_id[] = {
+	{"bmp280", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, bmp280_id);
+
+static struct i2c_driver bmp280_driver = {
+	.driver = {
+		.name	= "bmp280",
+		.acpi_match_table = ACPI_PTR(bmp280_acpi_match),
+	},
+	.probe		= bmp280_probe,
+	.id_table	= bmp280_id,
+};
+module_i2c_driver(bmp280_driver);
+
+MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
+MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP280 pressure and temperature sensor");
+MODULE_LICENSE("GPL v2");

drivers/iio/pressure/st_pressure.h

@@ -26,8 +26,7 @@ static const struct st_sensors_platform_data default_press_pdata = {
 	.drdy_int_pin = 1,
 };
 
-int st_press_common_probe(struct iio_dev *indio_dev,
+int st_press_common_probe(struct iio_dev *indio_dev);
-					struct st_sensors_platform_data *pdata);
 void st_press_common_remove(struct iio_dev *indio_dev);
 
 #ifdef CONFIG_IIO_BUFFER

drivers/iio/pressure/st_pressure_buffer.c

@@ -38,10 +38,10 @@ static int st_press_buffer_preenable(struct iio_dev *indio_dev)
 static int st_press_buffer_postenable(struct iio_dev *indio_dev)
 {
 	int err;
-	struct st_sensor_data *pdata = iio_priv(indio_dev);
+	struct st_sensor_data *press_data = iio_priv(indio_dev);
 
-	pdata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+	press_data->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
-	if (pdata->buffer_data == NULL) {
+	if (press_data->buffer_data == NULL) {
 		err = -ENOMEM;
 		goto allocate_memory_error;
 	}
@@ -53,7 +53,7 @@ static int st_press_buffer_postenable(struct iio_dev *indio_dev)
 	return err;
 
 st_press_buffer_postenable_error:
-	kfree(pdata->buffer_data);
+	kfree(press_data->buffer_data);
 allocate_memory_error:
 	return err;
 }
@@ -61,7 +61,7 @@ allocate_memory_error:
 static int st_press_buffer_predisable(struct iio_dev *indio_dev)
 {
 	int err;
-	struct st_sensor_data *pdata = iio_priv(indio_dev);
+	struct st_sensor_data *press_data = iio_priv(indio_dev);
 
 	err = iio_triggered_buffer_predisable(indio_dev);
 	if (err < 0)
@@ -70,7 +70,7 @@ static int st_press_buffer_predisable(struct iio_dev *indio_dev)
 	err = st_sensors_set_enable(indio_dev, false);
 
 st_press_buffer_predisable_error:
-	kfree(pdata->buffer_data);
+	kfree(press_data->buffer_data);
 	return err;
 }
 

drivers/iio/pressure/st_pressure_core.c

@@ -175,7 +175,7 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(1)
 };
 
-static const struct st_sensors st_press_sensors[] = {
+static const struct st_sensor_settings st_press_sensors_settings[] = {
 	{
 		.wai = ST_PRESS_LPS331AP_WAI_EXP,
 		.sensors_supported = {
@@ -333,7 +333,7 @@ static int st_press_read_raw(struct iio_dev *indio_dev,
 							int *val2, long mask)
 {
 	int err;
-	struct st_sensor_data *pdata = iio_priv(indio_dev);
+	struct st_sensor_data *press_data = iio_priv(indio_dev);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
@@ -347,10 +347,10 @@ static int st_press_read_raw(struct iio_dev *indio_dev,
 
 		switch (ch->type) {
 		case IIO_PRESSURE:
-			*val2 = pdata->current_fullscale->gain;
+			*val2 = press_data->current_fullscale->gain;
 			break;
 		case IIO_TEMP:
-			*val2 = pdata->current_fullscale->gain2;
+			*val2 = press_data->current_fullscale->gain2;
 			break;
 		default:
 			err = -EINVAL;
@@ -371,7 +371,7 @@ static int st_press_read_raw(struct iio_dev *indio_dev,
 
 		return IIO_VAL_FRACTIONAL;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		*val = pdata->odr;
+		*val = press_data->odr;
 		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
@@ -409,11 +409,10 @@ static const struct iio_trigger_ops st_press_trigger_ops = {
 #define ST_PRESS_TRIGGER_OPS NULL
 #endif
 
-int st_press_common_probe(struct iio_dev *indio_dev,
+int st_press_common_probe(struct iio_dev *indio_dev)
-				struct st_sensors_platform_data *plat_data)
 {
-	struct st_sensor_data *pdata = iio_priv(indio_dev);
+	struct st_sensor_data *press_data = iio_priv(indio_dev);
-	int irq = pdata->get_irq_data_ready(indio_dev);
+	int irq = press_data->get_irq_data_ready(indio_dev);
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -422,28 +421,30 @@ int st_press_common_probe(struct iio_dev *indio_dev,
 	st_sensors_power_enable(indio_dev);
 
 	err = st_sensors_check_device_support(indio_dev,
-					      ARRAY_SIZE(st_press_sensors),
+					ARRAY_SIZE(st_press_sensors_settings),
-					      st_press_sensors);
+					st_press_sensors_settings);
 	if (err < 0)
 		return err;
 
-	pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
+	press_data->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
-	pdata->multiread_bit     = pdata->sensor->multi_read_bit;
+	press_data->multiread_bit = press_data->sensor_settings->multi_read_bit;
-	indio_dev->channels      = pdata->sensor->ch;
+	indio_dev->channels = press_data->sensor_settings->ch;
-	indio_dev->num_channels  = pdata->sensor->num_ch;
+	indio_dev->num_channels = press_data->sensor_settings->num_ch;
 
-	if (pdata->sensor->fs.addr != 0)
+	if (press_data->sensor_settings->fs.addr != 0)
-		pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
+		press_data->current_fullscale =
-			&pdata->sensor->fs.fs_avl[0];
+			(struct st_sensor_fullscale_avl *)
+				&press_data->sensor_settings->fs.fs_avl[0];
 
-	pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
+	press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
 
 	/* Some devices don't support a data ready pin. */
-	if (!plat_data && pdata->sensor->drdy_irq.addr)
+	if (!press_data->dev->platform_data &&
-		plat_data =
+				press_data->sensor_settings->drdy_irq.addr)
+		press_data->dev->platform_data =
 			(struct st_sensors_platform_data *)&default_press_pdata;
 
-	err = st_sensors_init_sensor(indio_dev, plat_data);
+	err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
 	if (err < 0)
 		return err;
 
@@ -479,12 +480,12 @@ EXPORT_SYMBOL(st_press_common_probe);
 
 void st_press_common_remove(struct iio_dev *indio_dev)
 {
-	struct st_sensor_data *pdata = iio_priv(indio_dev);
+	struct st_sensor_data *press_data = iio_priv(indio_dev);
 
 	st_sensors_power_disable(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (pdata->get_irq_data_ready(indio_dev) > 0)
+	if (press_data->get_irq_data_ready(indio_dev) > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 
 	st_press_deallocate_ring(indio_dev);

drivers/iio/pressure/st_pressure_i2c.c

@@ -43,20 +43,19 @@ static int st_press_i2c_probe(struct i2c_client *client,
 						const struct i2c_device_id *id)
 {
 	struct iio_dev *indio_dev;
-	struct st_sensor_data *pdata;
+	struct st_sensor_data *press_data;
 	int err;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*pdata));
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*press_data));
 	if (!indio_dev)
 		return -ENOMEM;
 
-	pdata = iio_priv(indio_dev);
+	press_data = iio_priv(indio_dev);
-	pdata->dev = &client->dev;
 	st_sensors_of_i2c_probe(client, st_press_of_match);
 
-	st_sensors_i2c_configure(indio_dev, client, pdata);
+	st_sensors_i2c_configure(indio_dev, client, press_data);
 
-	err = st_press_common_probe(indio_dev, client->dev.platform_data);
+	err = st_press_common_probe(indio_dev);
 	if (err < 0)
 		return err;
 

drivers/iio/pressure/st_pressure_spi.c

@@ -21,19 +21,18 @@
 static int st_press_spi_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
-	struct st_sensor_data *pdata;
+	struct st_sensor_data *press_data;
 	int err;
 
-	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*pdata));
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*press_data));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
-	pdata = iio_priv(indio_dev);
+	press_data = iio_priv(indio_dev);
-	pdata->dev = &spi->dev;
 
-	st_sensors_spi_configure(indio_dev, spi, pdata);
+	st_sensors_spi_configure(indio_dev, spi, press_data);
 
-	err = st_press_common_probe(indio_dev, spi->dev.platform_data);
+	err = st_press_common_probe(indio_dev);
 	if (err < 0)
 		return err;
 

drivers/iio/proximity/as3935.c

@@ -95,7 +95,7 @@ static int as3935_read(struct as3935_state *st, unsigned int reg, int *val)
 	*val = ret;
 
 	return 0;
-};
+}
 
 static int as3935_write(struct as3935_state *st,
 				unsigned int reg,
@@ -107,7 +107,7 @@ static int as3935_write(struct as3935_state *st,
 	buf[1] = val;
 
 	return spi_write(st->spi, buf, 2);
-};
+}
 
 static ssize_t as3935_sensor_sensitivity_show(struct device *dev,
 					struct device_attribute *attr,
@@ -122,7 +122,7 @@ static ssize_t as3935_sensor_sensitivity_show(struct device *dev,
 	val = (val & AS3935_AFE_MASK) >> 1;
 
 	return sprintf(buf, "%d\n", val);
-};
+}
 
 static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
 					struct device_attribute *attr,
@@ -142,7 +142,7 @@ static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
 	as3935_write(st, AS3935_AFE_GAIN, val << 1);
 
 	return len;
-};
+}
 
 static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
 	as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0);
@@ -214,7 +214,7 @@ err_read:
 	iio_trigger_notify_done(indio_dev->trig);
 
 	return IRQ_HANDLED;
-};
+}
 
 static const struct iio_trigger_ops iio_interrupt_trigger_ops = {
 	.owner = THIS_MODULE,
@@ -238,7 +238,7 @@ static void as3935_event_work(struct work_struct *work)
 		dev_warn(&st->spi->dev, "noise level is too high");
 		break;
 	}
-};
+}
 
 static irqreturn_t as3935_interrupt_handler(int irq, void *private)
 {
@@ -417,7 +417,7 @@ unregister_trigger:
 	iio_trigger_unregister(st->trig);
 
 	return ret;
-};
+}
 
 static int as3935_remove(struct spi_device *spi)
 {
@@ -429,7 +429,7 @@ static int as3935_remove(struct spi_device *spi)
 	iio_trigger_unregister(st->trig);
 
 	return 0;
-};
+}
 
 static const struct spi_device_id as3935_id[] = {
 	{"as3935", 0},

drivers/staging/iio/Documentation/generic_buffer.c

@@ -162,11 +162,12 @@ int main(int argc, char **argv)
 	char *buffer_access;
 	int scan_size;
 	int noevents = 0;
+	int notrigger = 0;
 	char *dummy;
 
 	struct iio_channel_info *channels;
 
-	while ((c = getopt(argc, argv, "l:w:c:et:n:")) != -1) {
+	while ((c = getopt(argc, argv, "l:w:c:et:n:g")) != -1) {
 		switch (c) {
 		case 'n':
 			device_name = optarg;
@@ -187,6 +188,9 @@ int main(int argc, char **argv)
 		case 'l':
 			buf_len = strtoul(optarg, &dummy, 10);
 			break;
+		case 'g':
+			notrigger = 1;
+			break;
 		case '?':
 			return -1;
 		}
@@ -205,28 +209,32 @@ int main(int argc, char **argv)
 	printf("iio device number being used is %d\n", dev_num);
 
 	asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num);
-	if (trigger_name == NULL) {
-		/*
-		 * Build the trigger name. If it is device associated its
-		 * name is <device_name>_dev[n] where n matches the device
-		 * number found above
-		 */
-		ret = asprintf(&trigger_name,
-			       "%s-dev%d", device_name, dev_num);
-		if (ret < 0) {
-			ret = -ENOMEM;
-			goto error_ret;
-		}
-	}
 
-	/* Verify the trigger exists */
+	if (!notrigger) {
-	trig_num = find_type_by_name(trigger_name, "trigger");
+		if (trigger_name == NULL) {
-	if (trig_num < 0) {
+			/*
-		printf("Failed to find the trigger %s\n", trigger_name);
+			 * Build the trigger name. If it is device associated
-		ret = -ENODEV;
+			 * its name is <device_name>_dev[n] where n matches
-		goto error_free_triggername;
+			 * the device number found above.
-	}
+			 */
-	printf("iio trigger number being used is %d\n", trig_num);
+			ret = asprintf(&trigger_name,
+				       "%s-dev%d", device_name, dev_num);
+			if (ret < 0) {
+				ret = -ENOMEM;
+				goto error_ret;
+			}
+		}
+
+		/* Verify the trigger exists */
+		trig_num = find_type_by_name(trigger_name, "trigger");
+		if (trig_num < 0) {
+			printf("Failed to find the trigger %s\n", trigger_name);
+			ret = -ENODEV;
+			goto error_free_triggername;
+		}
+		printf("iio trigger number being used is %d\n", trig_num);
+	} else
+		printf("trigger-less mode selected\n");
 
 	/*
 	 * Parse the files in scan_elements to identify what channels are
@@ -250,14 +258,18 @@ int main(int argc, char **argv)
 		ret = -ENOMEM;
 		goto error_free_triggername;
 	}
-	printf("%s %s\n", dev_dir_name, trigger_name);
+
-	/* Set the device trigger to be the data ready trigger found above */
+	if (!notrigger) {
-	ret = write_sysfs_string_and_verify("trigger/current_trigger",
+		printf("%s %s\n", dev_dir_name, trigger_name);
-					dev_dir_name,
+		/* Set the device trigger to be the data ready trigger found
-					trigger_name);
+		 * above */
-	if (ret < 0) {
+		ret = write_sysfs_string_and_verify("trigger/current_trigger",
-		printf("Failed to write current_trigger file\n");
+						    dev_dir_name,
-		goto error_free_buf_dir_name;
+						    trigger_name);
+		if (ret < 0) {
+			printf("Failed to write current_trigger file\n");
+			goto error_free_buf_dir_name;
+		}
 	}
 
 	/* Setup ring buffer parameters */
@@ -327,9 +339,10 @@ int main(int argc, char **argv)
 	if (ret < 0)
 		goto error_close_buffer_access;
 
-	/* Disconnect the trigger - just write a dummy name. */
+	if (!notrigger)
-	write_sysfs_string("trigger/current_trigger",
+		/* Disconnect the trigger - just write a dummy name. */
-			dev_dir_name, "NULL");
+		write_sysfs_string("trigger/current_trigger",
+				   dev_dir_name, "NULL");
 
 error_close_buffer_access:
 	close(fp);

drivers/staging/iio/accel/lis3l02dq_ring.c

@@ -35,6 +35,7 @@ irqreturn_t lis3l02dq_data_rdy_trig_poll(int irq, void *private)
 		iio_trigger_poll(st->trig);
 		return IRQ_HANDLED;
 	}
+
 	return IRQ_WAKE_THREAD;
 }
 

include/linux/iio/common/st_sensors.h

@@ -164,7 +164,7 @@ struct st_sensor_transfer_function {
 };
 
 /**
- * struct st_sensors - ST sensors list
+ * struct st_sensor_settings - ST specific sensor settings
  * @wai: Contents of WhoAmI register.
  * @sensors_supported: List of supported sensors by struct itself.
  * @ch: IIO channels for the sensor.
@@ -177,7 +177,7 @@ struct st_sensor_transfer_function {
  * @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read.
  * @bootime: samples to discard when sensor passing from power-down to power-up.
  */
-struct st_sensors {
+struct st_sensor_settings {
 	u8 wai;
 	char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME];
 	struct iio_chan_spec *ch;
@@ -196,7 +196,7 @@ struct st_sensors {
  * struct st_sensor_data - ST sensor device status
  * @dev: Pointer to instance of struct device (I2C or SPI).
  * @trig: The trigger in use by the core driver.
- * @sensor: Pointer to the current sensor struct in use.
+ * @sensor_settings: Pointer to the specific sensor settings in use.
  * @current_fullscale: Maximum range of measure by the sensor.
  * @vdd: Pointer to sensor's Vdd power supply
  * @vdd_io: Pointer to sensor's Vdd-IO power supply
@@ -213,7 +213,7 @@ struct st_sensors {
 struct st_sensor_data {
 	struct device *dev;
 	struct iio_trigger *trig;
-	struct st_sensors *sensor;
+	struct st_sensor_settings *sensor_settings;
 	struct st_sensor_fullscale_avl *current_fullscale;
 	struct regulator *vdd;
 	struct regulator *vdd_io;
@@ -279,7 +279,7 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 				struct iio_chan_spec const *ch, int *val);
 
 int st_sensors_check_device_support(struct iio_dev *indio_dev,
-			int num_sensors_list, const struct st_sensors *sensors);
+	int num_sensors_list, const struct st_sensor_settings *sensor_settings);
 
 ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
 				struct device_attribute *attr, char *buf);

include/linux/iio/iio.h

@@ -13,6 +13,7 @@
 #include <linux/device.h>
 #include <linux/cdev.h>
 #include <linux/iio/types.h>
+#include <linux/of.h>
 /* IIO TODO LIST */
 /*
  * Provide means of adjusting timer accuracy.
@@ -326,6 +327,11 @@ struct iio_dev;
  * @update_scan_mode:	function to configure device and scan buffer when
  *			channels have changed
  * @debugfs_reg_access:	function to read or write register value of device
+ * @of_xlate:		function pointer to obtain channel specifier index.
+ *			When #iio-cells is greater than '0', the driver could
+ *			provide a custom of_xlate function that reads the
+ *			*args* and returns the appropriate index in registered
+ *			IIO channels array.
  **/
 struct iio_info {
 	struct module			*driver_module;
@@ -385,6 +391,8 @@ struct iio_info {
 	int (*debugfs_reg_access)(struct iio_dev *indio_dev,
 				  unsigned reg, unsigned writeval,
 				  unsigned *readval);
+	int (*of_xlate)(struct iio_dev *indio_dev,
+			const struct of_phandle_args *iiospec);
 };
 
 /**