arm64: dts: qcom: Add sc7180-trogdor-homestar
Homestar is a trogdor variant. The DT bits are essentially the same as in the downstream tree, except for: - skip -rev0 and rev1 which were early builds and have their issues, it's not very useful to support them upstream - don't include the .dtsi for the MIPI cameras, which doesn't exist upstream Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909122053.1.Ieafda79b74f74a2b15ed86e181c06a3060706ec5@changeid
This commit is contained in:
Matthias Kaehlcke
Bjorn Andersson
parent
63750607af
commit
be0416a3f9
@ -50,6 +50,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
|
||||
|
||||
20
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
Normal file
20
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
Normal file
@ -0,0 +1,20 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Google Homestar board device tree source
|
||||
*
|
||||
* Copyright 2021 Google LLC.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sc7180-trogdor-homestar.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Google Homestar (rev2)";
|
||||
compatible = "google,homestar-rev2","google,homestar-rev23", "qcom,sc7180";
|
||||
};
|
||||
|
||||
&panel {
|
||||
/delete-property/hpd-gpios;
|
||||
no-hpd;
|
||||
};
|
||||
15
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
Normal file
15
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
Normal file
@ -0,0 +1,15 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Google Homestar board device tree source
|
||||
*
|
||||
* Copyright 2021 Google LLC.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sc7180-trogdor-homestar.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Google Homestar (rev3+)";
|
||||
compatible = "google,homestar", "qcom,sc7180";
|
||||
};
|
||||
335
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
Normal file
335
arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
Normal file
@ -0,0 +1,335 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Google Homestar board device tree source
|
||||
*
|
||||
* Copyright 2021 Google LLC.
|
||||
*/
|
||||
|
||||
#include "sc7180.dtsi"
|
||||
|
||||
ap_ec_spi: &spi6 {};
|
||||
ap_h1_spi: &spi0 {};
|
||||
|
||||
#include "sc7180-trogdor.dtsi"
|
||||
|
||||
/ {
|
||||
/* BOARD-SPECIFIC TOP LEVEL NODES */
|
||||
|
||||
max98360a_1: max98360a_1 {
|
||||
compatible = "maxim,max98360a";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
max98360a_2: max98360a_2 {
|
||||
compatible = "maxim,max98360a";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
max98360a_3: max98360a_3 {
|
||||
compatible = "maxim,max98360a";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
pp3300_touch: pp3300-touch {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp3300_touch";
|
||||
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&en_pp3300_touch>;
|
||||
|
||||
vin-supply = <&pp3300_a>;
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
skin_temp_thermal: skin-temp-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <0>;
|
||||
|
||||
thermal-sensors = <&pm6150_adc_tm 1>;
|
||||
sustainable-power = <814>;
|
||||
|
||||
trips {
|
||||
skin_temp_alert0: trip-point0 {
|
||||
temperature = <55000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
skin_temp_alert1: trip-point1 {
|
||||
temperature = <58000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
skin-temp-crit {
|
||||
temperature = <73000>;
|
||||
hysteresis = <1000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&skin_temp_alert0>;
|
||||
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
|
||||
map1 {
|
||||
trip = <&skin_temp_alert1>;
|
||||
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ap_tp_i2c {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ap_ts_pen_1v8: &i2c4 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
ap_ts: touchscreen@14 {
|
||||
compatible = "goodix,gt7375p";
|
||||
reg = <0x14>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vdd-supply = <&pp3300_touch>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Panel controls backlight over aux channel */
|
||||
|
||||
&backlight {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&camcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&panel {
|
||||
compatible = "samsung,atna33xc20";
|
||||
enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
||||
/delete-property/ backlight;
|
||||
};
|
||||
|
||||
&pm6150_adc {
|
||||
skin-temp-thermistor@4d {
|
||||
reg = <ADC5_AMUX_THM1_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm6150_adc_tm {
|
||||
status = "okay";
|
||||
|
||||
skin-temp-thermistor@1 {
|
||||
reg = <1>;
|
||||
io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time-us = <200>;
|
||||
};
|
||||
};
|
||||
|
||||
&pp3300_dx_edp {
|
||||
gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&secondary_mi2s {
|
||||
qcom,playback-sd-lines = <0 1>;
|
||||
};
|
||||
|
||||
&sound_multimedia1_codec {
|
||||
sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ;
|
||||
};
|
||||
|
||||
&wifi {
|
||||
qcom,ath10k-calibration-variant = "GO_HOMESTAR";
|
||||
};
|
||||
|
||||
/* PINCTRL - modifications to sc7180-trogdor.dtsi */
|
||||
|
||||
&en_pp3300_dx_edp {
|
||||
pinmux {
|
||||
pins = "gpio67";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio67";
|
||||
};
|
||||
};
|
||||
|
||||
&sec_mi2s_active{
|
||||
pinmux {
|
||||
pins = "gpio49", "gpio50", "gpio51", "gpio52";
|
||||
function = "mi2s_1";
|
||||
};
|
||||
};
|
||||
|
||||
&ts_reset_l {
|
||||
pinconf {
|
||||
/*
|
||||
* We want reset state by default and it will be up to the
|
||||
* driver to disable this when it's ready.
|
||||
*/
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
/* PINCTRL - board-specific pinctrl */
|
||||
|
||||
&tlmm {
|
||||
gpio-line-names = "HUB_RST_L",
|
||||
"AP_RAM_ID0",
|
||||
"AP_SKU_ID2",
|
||||
"AP_RAM_ID1",
|
||||
"",
|
||||
"AP_RAM_ID2",
|
||||
"UF_CAM_EN",
|
||||
"WF_CAM_EN",
|
||||
"TS_RESET_L",
|
||||
"TS_INT_L",
|
||||
"",
|
||||
"EDP_BRIJ_IRQ",
|
||||
"AP_EDP_BKLTEN",
|
||||
"UF_CAM_MCLK",
|
||||
"WF_CAM_CLK",
|
||||
"EDP_BRIJ_I2C_SDA",
|
||||
"EDP_BRIJ_I2C_SCL",
|
||||
"UF_CAM_SDA",
|
||||
"UF_CAM_SCL",
|
||||
"WF_CAM_SDA",
|
||||
"WF_CAM_SCL",
|
||||
"AVEE_LCD_EN",
|
||||
"",
|
||||
"AMP_EN",
|
||||
"AMP_EN2",
|
||||
"AP_SAR_SENSOR_SDA",
|
||||
"AP_SAR_SENSOR_SCL",
|
||||
"SEL_LCM",
|
||||
"HP_IRQ",
|
||||
"WF_CAM_RST_L",
|
||||
"UF_CAM_RST_L",
|
||||
"AP_BRD_ID2",
|
||||
"BRIJ_SUSPEND",
|
||||
"AP_BRD_ID0",
|
||||
"AP_H1_SPI_MISO",
|
||||
"AP_H1_SPI_MOSI",
|
||||
"AP_H1_SPI_CLK",
|
||||
"AP_H1_SPI_CS_L",
|
||||
"BT_UART_CTS",
|
||||
"BT_UART_RTS",
|
||||
"BT_UART_TXD",
|
||||
"BT_UART_RXD",
|
||||
"H1_AP_INT_ODL",
|
||||
"",
|
||||
"UART_AP_TX_DBG_RX",
|
||||
"UART_DBG_TX_AP_RX",
|
||||
"HP_I2C_SDA",
|
||||
"HP_I2C_SCL",
|
||||
"FORCED_USB_BOOT",
|
||||
"AMP_BCLK",
|
||||
"AMP_LRCLK",
|
||||
"AMP_DIN",
|
||||
"AMP_DIN_2",
|
||||
"HP_BCLK",
|
||||
"HP_LRCLK",
|
||||
"HP_DOUT",
|
||||
"HP_DIN",
|
||||
"HP_MCLK",
|
||||
"AP_SKU_ID0",
|
||||
"AP_EC_SPI_MISO",
|
||||
"AP_EC_SPI_MOSI",
|
||||
"AP_EC_SPI_CLK",
|
||||
"AP_EC_SPI_CS_L",
|
||||
"AP_SPI_CLK",
|
||||
"AP_SPI_MOSI",
|
||||
"AP_SPI_MISO",
|
||||
/*
|
||||
* AP_FLASH_WP_L is crossystem ABI. Schematics
|
||||
* call it BIOS_FLASH_WP_L.
|
||||
*/
|
||||
"AP_FLASH_WP_L",
|
||||
"EN_PP3300_DX_EDP",
|
||||
"AP_SPI_CS0_L",
|
||||
"SD_CD_ODL",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"WLAN_SW_CTRL",
|
||||
"",
|
||||
"REPORT_E",
|
||||
"VDD_RESET_1.8V",
|
||||
"ID0",
|
||||
"",
|
||||
"ID1",
|
||||
"AVDD_LCD_EN",
|
||||
"MIPI_1.8V_EN",
|
||||
"",
|
||||
"CODEC_PWR_EN",
|
||||
"HUB_EN",
|
||||
"",
|
||||
"PP1800_MIPI_SW_EN",
|
||||
"EN_PP3300_TOUCH",
|
||||
"",
|
||||
"",
|
||||
"AP_SKU_ID1",
|
||||
"AP_RST_REQ",
|
||||
"",
|
||||
"AP_BRD_ID1",
|
||||
"AP_EC_INT_L",
|
||||
"SDM_GRFC_3",
|
||||
"",
|
||||
"",
|
||||
"BOOT_CONFIG_4",
|
||||
"BOOT_CONFIG_2",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"EDP_BRIJ_EN",
|
||||
"",
|
||||
"",
|
||||
"BOOT_CONFIG_3",
|
||||
"WCI2_LTE_COEX_TXD",
|
||||
"WCI2_LTE_COEX_RXD",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"FORCED_USB_BOOT_POL",
|
||||
"AP_TS_PEN_I2C_SDA",
|
||||
"AP_TS_PEN_I2C_SCL",
|
||||
"DP_HOT_PLUG_DET",
|
||||
"EC_IN_RW_ODL";
|
||||
|
||||
en_pp3300_touch: en-pp3300-touch {
|
||||
pinmux {
|
||||
pins = "gpio87";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio87";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user