[SCTP]: Honor flags when setting peer address parameters

Parameters only take effect when a corresponding flag bit is set
and a value is specified. This means we need to check the flags
in addition to checking for non-zero value.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Vlad Yasevich 2007-03-23 11:33:12 -07:00 committed by David S. Miller
parent 1ae4114dce
commit bdf3092af6
2 changed files with 52 additions and 17 deletions

View File

@ -513,16 +513,17 @@ struct sctp_setadaptation {
* address's parameters:
*/
enum sctp_spp_flags {
SPP_HB_ENABLE = 1, /*Enable heartbeats*/
SPP_HB_DISABLE = 2, /*Disable heartbeats*/
SPP_HB_ENABLE = 1<<0, /*Enable heartbeats*/
SPP_HB_DISABLE = 1<<1, /*Disable heartbeats*/
SPP_HB = SPP_HB_ENABLE | SPP_HB_DISABLE,
SPP_HB_DEMAND = 4, /*Send heartbeat immediately*/
SPP_PMTUD_ENABLE = 8, /*Enable PMTU discovery*/
SPP_PMTUD_DISABLE = 16, /*Disable PMTU discovery*/
SPP_HB_DEMAND = 1<<2, /*Send heartbeat immediately*/
SPP_PMTUD_ENABLE = 1<<3, /*Enable PMTU discovery*/
SPP_PMTUD_DISABLE = 1<<4, /*Disable PMTU discovery*/
SPP_PMTUD = SPP_PMTUD_ENABLE | SPP_PMTUD_DISABLE,
SPP_SACKDELAY_ENABLE = 32, /*Enable SACK*/
SPP_SACKDELAY_DISABLE = 64, /*Disable SACK*/
SPP_SACKDELAY_ENABLE = 1<<5, /*Enable SACK*/
SPP_SACKDELAY_DISABLE = 1<<6, /*Disable SACK*/
SPP_SACKDELAY = SPP_SACKDELAY_ENABLE | SPP_SACKDELAY_DISABLE,
SPP_HB_TIME_IS_ZERO = 1<<7, /* Set HB delay to 0 */
};
struct sctp_paddrparams {

View File

@ -2039,6 +2039,10 @@ static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval,
* SPP_HB_DEMAND - Request a user initiated heartbeat
* to be made immediately.
*
* SPP_HB_TIME_IS_ZERO - Specify's that the time for
* heartbeat delayis to be set to the value of 0
* milliseconds.
*
* SPP_PMTUD_ENABLE - This field will enable PMTU
* discovery upon the specified address. Note that
* if the address feild is empty then all addresses
@ -2081,13 +2085,30 @@ static int sctp_apply_peer_addr_params(struct sctp_paddrparams *params,
return error;
}
if (params->spp_hbinterval) {
if (trans) {
trans->hbinterval = msecs_to_jiffies(params->spp_hbinterval);
} else if (asoc) {
asoc->hbinterval = msecs_to_jiffies(params->spp_hbinterval);
} else {
sp->hbinterval = params->spp_hbinterval;
/* Note that unless the spp_flag is set to SPP_HB_ENABLE the value of
* this field is ignored. Note also that a value of zero indicates
* the current setting should be left unchanged.
*/
if (params->spp_flags & SPP_HB_ENABLE) {
/* Re-zero the interval if the SPP_HB_TIME_IS_ZERO is
* set. This lets us use 0 value when this flag
* is set.
*/
if (params->spp_flags & SPP_HB_TIME_IS_ZERO)
params->spp_hbinterval = 0;
if (params->spp_hbinterval ||
(params->spp_flags & SPP_HB_TIME_IS_ZERO)) {
if (trans) {
trans->hbinterval =
msecs_to_jiffies(params->spp_hbinterval);
} else if (asoc) {
asoc->hbinterval =
msecs_to_jiffies(params->spp_hbinterval);
} else {
sp->hbinterval = params->spp_hbinterval;
}
}
}
@ -2104,7 +2125,12 @@ static int sctp_apply_peer_addr_params(struct sctp_paddrparams *params,
}
}
if (params->spp_pathmtu) {
/* When Path MTU discovery is disabled the value specified here will
* be the "fixed" path mtu (i.e. the value of the spp_flags field must
* include the flag SPP_PMTUD_DISABLE for this field to have any
* effect).
*/
if ((params->spp_flags & SPP_PMTUD_DISABLE) && params->spp_pathmtu) {
if (trans) {
trans->pathmtu = params->spp_pathmtu;
sctp_assoc_sync_pmtu(asoc);
@ -2135,7 +2161,11 @@ static int sctp_apply_peer_addr_params(struct sctp_paddrparams *params,
}
}
if (params->spp_sackdelay) {
/* Note that unless the spp_flag is set to SPP_SACKDELAY_ENABLE the
* value of this field is ignored. Note also that a value of zero
* indicates the current setting should be left unchanged.
*/
if ((params->spp_flags & SPP_SACKDELAY_ENABLE) && params->spp_sackdelay) {
if (trans) {
trans->sackdelay =
msecs_to_jiffies(params->spp_sackdelay);
@ -2163,7 +2193,11 @@ static int sctp_apply_peer_addr_params(struct sctp_paddrparams *params,
}
}
if (params->spp_pathmaxrxt) {
/* Note that unless the spp_flag is set to SPP_PMTUD_ENABLE the value
* of this field is ignored. Note also that a value of zero
* indicates the current setting should be left unchanged.
*/
if ((params->spp_flags & SPP_PMTUD_ENABLE) && params->spp_pathmaxrxt) {
if (trans) {
trans->pathmaxrxt = params->spp_pathmaxrxt;
} else if (asoc) {