From 552165bcf7060b998b4a9b5b86110b6a5e04dfd9 Mon Sep 17 00:00:00 2001
From: David Rivshin <drivshin@allworx.com>
Date: Wed, 27 Apr 2016 21:25:25 -0400
Subject: [PATCH 1/5] drivers: net: cpsw: fix parsing of phy-handle DT property
in dual_emac config
Commit 9e42f715264ff158478fa30eaed847f6e131366b ("drivers: net: cpsw: add
phy-handle parsing") saved the "phy-handle" phandle into a new cpsw_priv
field. However, phy connections are per-slave, so the phy_node field should
be in cpsw_slave_data rather than cpsw_priv.
This would go unnoticed in a single emac configuration. But in dual_emac
mode, the last "phy-handle" property parsed for either slave would be used
by both of them, causing them both to refer to the same phy_device.
Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing")
Signed-off-by: David Rivshin <drivshin@allworx.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/ti/cpsw.c | 13 ++++++-------
drivers/net/ethernet/ti/cpsw.h | 1 +
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index bbb77cd8ad67..ce0b0caee35b 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -367,7 +367,6 @@ struct cpsw_priv {
spinlock_t lock;
struct platform_device *pdev;
struct net_device *ndev;
- struct device_node *phy_node;
struct napi_struct napi_rx;
struct napi_struct napi_tx;
struct device *dev;
@@ -1148,8 +1147,8 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
1 << slave_port, 0, 0, ALE_MCAST_FWD_2);
- if (priv->phy_node)
- slave->phy = of_phy_connect(priv->ndev, priv->phy_node,
+ if (slave->data->phy_node)
+ slave->phy = of_phy_connect(priv->ndev, slave->data->phy_node,
&cpsw_adjust_link, 0, slave->data->phy_if);
else
slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
@@ -1940,12 +1939,11 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv,
slave->port_vlan = data->dual_emac_res_vlan;
}
-static int cpsw_probe_dt(struct cpsw_priv *priv,
+static int cpsw_probe_dt(struct cpsw_platform_data *data,
struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct device_node *slave_node;
- struct cpsw_platform_data *data = &priv->data;
int i = 0, ret;
u32 prop;
@@ -2033,7 +2031,8 @@ static int cpsw_probe_dt(struct cpsw_priv *priv,
if (strcmp(slave_node->name, "slave"))
continue;
- priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0);
+ slave_data->phy_node = of_parse_phandle(slave_node,
+ "phy-handle", 0);
parp = of_get_property(slave_node, "phy_id", &lenp);
if (of_phy_is_fixed_link(slave_node)) {
struct device_node *phy_node;
@@ -2275,7 +2274,7 @@ static int cpsw_probe(struct platform_device *pdev)
/* Select default pin state */
pinctrl_pm_select_default_state(&pdev->dev);
- if (cpsw_probe_dt(priv, pdev)) {
+ if (cpsw_probe_dt(&priv->data, pdev)) {
dev_err(&pdev->dev, "cpsw: platform data missing\n");
ret = -ENODEV;
goto clean_runtime_disable_ret;
diff --git a/drivers/net/ethernet/ti/cpsw.h b/drivers/net/ethernet/ti/cpsw.h
index 442a7038e660..e50afd1b2eda 100644
--- a/drivers/net/ethernet/ti/cpsw.h
+++ b/drivers/net/ethernet/ti/cpsw.h
@@ -18,6 +18,7 @@
#include <linux/phy.h>
struct cpsw_slave_data {
+ struct device_node *phy_node;
char phy_id[MII_BUS_ID_SIZE];
int phy_if;
u8 mac_addr[ETH_ALEN];
From d733f7542ad47cf73e033c90cf55158587e1d060 Mon Sep 17 00:00:00 2001
From: David Rivshin <drivshin@allworx.com>
Date: Wed, 27 Apr 2016 21:32:31 -0400
Subject: [PATCH 2/5] drivers: net: cpsw: fix segfault in case of bad
phy-handle
If an emac node has a phy-handle property that points to something
which is not a phy, then a segmentation fault will occur when the
interface is brought up. This is because while phy_connect() will
return ERR_PTR() on failure, of_phy_connect() will return NULL.
The common error check uses IS_ERR(), and so missed when
of_phy_connect() fails. The NULL pointer is then dereferenced.
Also, the common error message referenced slave->data->phy_id,
which would be empty in the case of phy-handle. Instead, use the
name of the device_node as a useful identifier. And in the phy_id
case add the error code for completeness.
Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing")
Signed-off-by: David Rivshin <drivshin@allworx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/ti/cpsw.c | 37 +++++++++++++++++++++-------------
1 file changed, 23 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index ce0b0caee35b..5903448e8ee9 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1147,25 +1147,34 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
1 << slave_port, 0, 0, ALE_MCAST_FWD_2);
- if (slave->data->phy_node)
+ if (slave->data->phy_node) {
slave->phy = of_phy_connect(priv->ndev, slave->data->phy_node,
&cpsw_adjust_link, 0, slave->data->phy_if);
- else
+ if (!slave->phy) {
+ dev_err(priv->dev, "phy \"%s\" not found on slave %d\n",
+ slave->data->phy_node->full_name,
+ slave->slave_num);
+ return;
+ }
+ } else {
slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
&cpsw_adjust_link, slave->data->phy_if);
- if (IS_ERR(slave->phy)) {
- dev_err(priv->dev, "phy %s not found on slave %d\n",
- slave->data->phy_id, slave->slave_num);
- slave->phy = NULL;
- } else {
- phy_attached_info(slave->phy);
-
- phy_start(slave->phy);
-
- /* Configure GMII_SEL register */
- cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface,
- slave->slave_num);
+ if (IS_ERR(slave->phy)) {
+ dev_err(priv->dev,
+ "phy \"%s\" not found on slave %d, err %ld\n",
+ slave->data->phy_id, slave->slave_num,
+ PTR_ERR(slave->phy));
+ slave->phy = NULL;
+ return;
+ }
}
+
+ phy_attached_info(slave->phy);
+
+ phy_start(slave->phy);
+
+ /* Configure GMII_SEL register */
+ cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface, slave->slave_num);
}
static inline void cpsw_add_default_vlan(struct cpsw_priv *priv)
From ae092b5bded24d5dc7dae0e0aef4669c169ce874 Mon Sep 17 00:00:00 2001
From: David Rivshin <drivshin@allworx.com>
Date: Wed, 27 Apr 2016 21:38:26 -0400
Subject: [PATCH 3/5] drivers: net: cpsw: don't ignore phy-mode if phy-handle
is used
The phy-mode emac property was only being processed in the phy_id
or fixed-link cases. However if phy-handle was specified instead,
an error message would complain about the lack of phy_id or
fixed-link, and then jump past the of_get_phy_mode(). This would
result in the PHY mode defaulting to MII, regardless of what the
devicetree specified.
Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing")
Signed-off-by: David Rivshin <drivshin@allworx.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/ti/cpsw.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 5903448e8ee9..712bc6d75f21 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2043,7 +2043,11 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
slave_data->phy_node = of_parse_phandle(slave_node,
"phy-handle", 0);
parp = of_get_property(slave_node, "phy_id", &lenp);
- if (of_phy_is_fixed_link(slave_node)) {
+ if (slave_data->phy_node) {
+ dev_dbg(&pdev->dev,
+ "slave[%d] using phy-handle=\"%s\"\n",
+ i, slave_data->phy_node->full_name);
+ } else if (of_phy_is_fixed_link(slave_node)) {
struct device_node *phy_node;
struct phy_device *phy_dev;
@@ -2080,7 +2084,9 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
PHY_ID_FMT, mdio->name, phyid);
} else {
- dev_err(&pdev->dev, "No slave[%d] phy_id or fixed-link property\n", i);
+ dev_err(&pdev->dev,
+ "No slave[%d] phy_id, phy-handle, or fixed-link property\n",
+ i);
goto no_phy_slave;
}
slave_data->phy_if = of_get_phy_mode(slave_node);
From a5d2cb3b27441fe7432852d4198eadda1d9d19be Mon Sep 17 00:00:00 2001
From: David Rivshin <drivshin@allworx.com>
Date: Wed, 27 Apr 2016 21:42:47 -0400
Subject: [PATCH 4/5] dt: cpsw: phy-handle, phy_id, and fixed-link are mutually
exclusive
The phy-handle, phy_id, and fixed-link properties are mutually exclusive,
and only one need be specified. Make this clear in the binding doc.
Also mark the phy_id property as deprecated, as phy-handle should be
used instead.
Signed-off-by: David Rivshin <drivshin@allworx.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/devicetree/bindings/net/cpsw.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 28a4781ab6d7..0ae06491b430 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -45,13 +45,13 @@ Required properties:
Optional properties:
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
- mac-address : See ethernet.txt file in the same directory
-- phy_id : Specifies slave phy id
+- phy_id : Specifies slave phy id (deprecated, use phy-handle)
- phy-handle : See ethernet.txt file in the same directory
Slave sub-nodes:
- fixed-link : See fixed-link.txt file in the same directory
- Either the property phy_id, or the sub-node
- fixed-link can be specified
+
+Note: Exactly one of phy_id, phy-handle, or fixed-link must be specified.
Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
From 06cd6d6eda4bedbb826ed36e4c89734ea364ec4b Mon Sep 17 00:00:00 2001
From: David Rivshin <drivshin@allworx.com>
Date: Wed, 27 Apr 2016 21:45:45 -0400
Subject: [PATCH 5/5] drivers: net: cpsw: use of_phy_connect() in fixed-link
case
If a fixed-link DT subnode is used, the phy_device was looked up so
that a PHY ID string could be constructed and passed to phy_connect().
This is not necessary, as the device_node can be passed directly to
of_phy_connect() instead. This reuses the same codepath as if the
phy-handle DT property was used.
Signed-off-by: David Rivshin <drivshin@allworx.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Andrew Goodbody <andrew.goodbody@cambrionix.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/ti/cpsw.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 712bc6d75f21..e2fcdf1eec44 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2048,22 +2048,13 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
"slave[%d] using phy-handle=\"%s\"\n",
i, slave_data->phy_node->full_name);
} else if (of_phy_is_fixed_link(slave_node)) {
- struct device_node *phy_node;
- struct phy_device *phy_dev;
-
/* In the case of a fixed PHY, the DT node associated
* to the PHY is the Ethernet MAC DT node.
*/
ret = of_phy_register_fixed_link(slave_node);
if (ret)
return ret;
- phy_node = of_node_get(slave_node);
- phy_dev = of_phy_find_device(phy_node);
- if (!phy_dev)
- return -ENODEV;
- snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
- PHY_ID_FMT, phy_dev->mdio.bus->id,
- phy_dev->mdio.addr);
+ slave_data->phy_node = of_node_get(slave_node);
} else if (parp) {
u32 phyid;
struct device_node *mdio_node;