forked from Minki/linux
vfio-pci: Avoid recursive read-lock usage
A down_read on memory_lock is held when performing read/write accesses
to MMIO BAR space, including across the copy_to/from_user() callouts
which may fault. If the user buffer for these copies resides in an
mmap of device MMIO space, the mmap fault handler will acquire a
recursive read-lock on memory_lock. Avoid this by reducing the lock
granularity. Sequential accesses requiring multiple ioread/iowrite
cycles are expected to be rare, therefore typical accesses should not
see additional overhead.
VGA MMIO accesses are expected to be non-fatal regardless of the PCI
memory enable bit to allow legacy probing, this behavior remains with
a comment added. ioeventfds are now included in memory access testing,
with writes dropped while memory space is disabled.
Fixes: abafbc551f
("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This commit is contained in:
parent
9123e3a74e
commit
bc93b9ae01
@ -33,12 +33,14 @@
|
||||
|
||||
struct vfio_pci_ioeventfd {
|
||||
struct list_head next;
|
||||
struct vfio_pci_device *vdev;
|
||||
struct virqfd *virqfd;
|
||||
void __iomem *addr;
|
||||
uint64_t data;
|
||||
loff_t pos;
|
||||
int bar;
|
||||
int count;
|
||||
bool test_mem;
|
||||
};
|
||||
|
||||
struct vfio_pci_irq_ctx {
|
||||
|
@ -37,17 +37,70 @@
|
||||
#define vfio_ioread8 ioread8
|
||||
#define vfio_iowrite8 iowrite8
|
||||
|
||||
#define VFIO_IOWRITE(size) \
|
||||
static int vfio_pci_iowrite##size(struct vfio_pci_device *vdev, \
|
||||
bool test_mem, u##size val, void __iomem *io) \
|
||||
{ \
|
||||
if (test_mem) { \
|
||||
down_read(&vdev->memory_lock); \
|
||||
if (!__vfio_pci_memory_enabled(vdev)) { \
|
||||
up_read(&vdev->memory_lock); \
|
||||
return -EIO; \
|
||||
} \
|
||||
} \
|
||||
\
|
||||
vfio_iowrite##size(val, io); \
|
||||
\
|
||||
if (test_mem) \
|
||||
up_read(&vdev->memory_lock); \
|
||||
\
|
||||
return 0; \
|
||||
}
|
||||
|
||||
VFIO_IOWRITE(8)
|
||||
VFIO_IOWRITE(16)
|
||||
VFIO_IOWRITE(32)
|
||||
#ifdef iowrite64
|
||||
VFIO_IOWRITE(64)
|
||||
#endif
|
||||
|
||||
#define VFIO_IOREAD(size) \
|
||||
static int vfio_pci_ioread##size(struct vfio_pci_device *vdev, \
|
||||
bool test_mem, u##size *val, void __iomem *io) \
|
||||
{ \
|
||||
if (test_mem) { \
|
||||
down_read(&vdev->memory_lock); \
|
||||
if (!__vfio_pci_memory_enabled(vdev)) { \
|
||||
up_read(&vdev->memory_lock); \
|
||||
return -EIO; \
|
||||
} \
|
||||
} \
|
||||
\
|
||||
*val = vfio_ioread##size(io); \
|
||||
\
|
||||
if (test_mem) \
|
||||
up_read(&vdev->memory_lock); \
|
||||
\
|
||||
return 0; \
|
||||
}
|
||||
|
||||
VFIO_IOREAD(8)
|
||||
VFIO_IOREAD(16)
|
||||
VFIO_IOREAD(32)
|
||||
|
||||
/*
|
||||
* Read or write from an __iomem region (MMIO or I/O port) with an excluded
|
||||
* range which is inaccessible. The excluded range drops writes and fills
|
||||
* reads with -1. This is intended for handling MSI-X vector tables and
|
||||
* leftover space for ROM BARs.
|
||||
*/
|
||||
static ssize_t do_io_rw(void __iomem *io, char __user *buf,
|
||||
static ssize_t do_io_rw(struct vfio_pci_device *vdev, bool test_mem,
|
||||
void __iomem *io, char __user *buf,
|
||||
loff_t off, size_t count, size_t x_start,
|
||||
size_t x_end, bool iswrite)
|
||||
{
|
||||
ssize_t done = 0;
|
||||
int ret;
|
||||
|
||||
while (count) {
|
||||
size_t fillable, filled;
|
||||
@ -66,9 +119,15 @@ static ssize_t do_io_rw(void __iomem *io, char __user *buf,
|
||||
if (copy_from_user(&val, buf, 4))
|
||||
return -EFAULT;
|
||||
|
||||
vfio_iowrite32(val, io + off);
|
||||
ret = vfio_pci_iowrite32(vdev, test_mem,
|
||||
val, io + off);
|
||||
if (ret)
|
||||
return ret;
|
||||
} else {
|
||||
val = vfio_ioread32(io + off);
|
||||
ret = vfio_pci_ioread32(vdev, test_mem,
|
||||
&val, io + off);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (copy_to_user(buf, &val, 4))
|
||||
return -EFAULT;
|
||||
@ -82,9 +141,15 @@ static ssize_t do_io_rw(void __iomem *io, char __user *buf,
|
||||
if (copy_from_user(&val, buf, 2))
|
||||
return -EFAULT;
|
||||
|
||||
vfio_iowrite16(val, io + off);
|
||||
ret = vfio_pci_iowrite16(vdev, test_mem,
|
||||
val, io + off);
|
||||
if (ret)
|
||||
return ret;
|
||||
} else {
|
||||
val = vfio_ioread16(io + off);
|
||||
ret = vfio_pci_ioread16(vdev, test_mem,
|
||||
&val, io + off);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (copy_to_user(buf, &val, 2))
|
||||
return -EFAULT;
|
||||
@ -98,9 +163,15 @@ static ssize_t do_io_rw(void __iomem *io, char __user *buf,
|
||||
if (copy_from_user(&val, buf, 1))
|
||||
return -EFAULT;
|
||||
|
||||
vfio_iowrite8(val, io + off);
|
||||
ret = vfio_pci_iowrite8(vdev, test_mem,
|
||||
val, io + off);
|
||||
if (ret)
|
||||
return ret;
|
||||
} else {
|
||||
val = vfio_ioread8(io + off);
|
||||
ret = vfio_pci_ioread8(vdev, test_mem,
|
||||
&val, io + off);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (copy_to_user(buf, &val, 1))
|
||||
return -EFAULT;
|
||||
@ -178,14 +249,6 @@ ssize_t vfio_pci_bar_rw(struct vfio_pci_device *vdev, char __user *buf,
|
||||
|
||||
count = min(count, (size_t)(end - pos));
|
||||
|
||||
if (res->flags & IORESOURCE_MEM) {
|
||||
down_read(&vdev->memory_lock);
|
||||
if (!__vfio_pci_memory_enabled(vdev)) {
|
||||
up_read(&vdev->memory_lock);
|
||||
return -EIO;
|
||||
}
|
||||
}
|
||||
|
||||
if (bar == PCI_ROM_RESOURCE) {
|
||||
/*
|
||||
* The ROM can fill less space than the BAR, so we start the
|
||||
@ -213,7 +276,8 @@ ssize_t vfio_pci_bar_rw(struct vfio_pci_device *vdev, char __user *buf,
|
||||
x_end = vdev->msix_offset + vdev->msix_size;
|
||||
}
|
||||
|
||||
done = do_io_rw(io, buf, pos, count, x_start, x_end, iswrite);
|
||||
done = do_io_rw(vdev, res->flags & IORESOURCE_MEM, io, buf, pos,
|
||||
count, x_start, x_end, iswrite);
|
||||
|
||||
if (done >= 0)
|
||||
*ppos += done;
|
||||
@ -221,9 +285,6 @@ ssize_t vfio_pci_bar_rw(struct vfio_pci_device *vdev, char __user *buf,
|
||||
if (bar == PCI_ROM_RESOURCE)
|
||||
pci_unmap_rom(pdev, io);
|
||||
out:
|
||||
if (res->flags & IORESOURCE_MEM)
|
||||
up_read(&vdev->memory_lock);
|
||||
|
||||
return done;
|
||||
}
|
||||
|
||||
@ -278,7 +339,12 @@ ssize_t vfio_pci_vga_rw(struct vfio_pci_device *vdev, char __user *buf,
|
||||
return ret;
|
||||
}
|
||||
|
||||
done = do_io_rw(iomem, buf, off, count, 0, 0, iswrite);
|
||||
/*
|
||||
* VGA MMIO is a legacy, non-BAR resource that hopefully allows
|
||||
* probing, so we don't currently worry about access in relation
|
||||
* to the memory enable bit in the command register.
|
||||
*/
|
||||
done = do_io_rw(vdev, false, iomem, buf, off, count, 0, 0, iswrite);
|
||||
|
||||
vga_put(vdev->pdev, rsrc);
|
||||
|
||||
@ -296,17 +362,21 @@ static int vfio_pci_ioeventfd_handler(void *opaque, void *unused)
|
||||
|
||||
switch (ioeventfd->count) {
|
||||
case 1:
|
||||
vfio_iowrite8(ioeventfd->data, ioeventfd->addr);
|
||||
vfio_pci_iowrite8(ioeventfd->vdev, ioeventfd->test_mem,
|
||||
ioeventfd->data, ioeventfd->addr);
|
||||
break;
|
||||
case 2:
|
||||
vfio_iowrite16(ioeventfd->data, ioeventfd->addr);
|
||||
vfio_pci_iowrite16(ioeventfd->vdev, ioeventfd->test_mem,
|
||||
ioeventfd->data, ioeventfd->addr);
|
||||
break;
|
||||
case 4:
|
||||
vfio_iowrite32(ioeventfd->data, ioeventfd->addr);
|
||||
vfio_pci_iowrite32(ioeventfd->vdev, ioeventfd->test_mem,
|
||||
ioeventfd->data, ioeventfd->addr);
|
||||
break;
|
||||
#ifdef iowrite64
|
||||
case 8:
|
||||
vfio_iowrite64(ioeventfd->data, ioeventfd->addr);
|
||||
vfio_pci_iowrite64(ioeventfd->vdev, ioeventfd->test_mem,
|
||||
ioeventfd->data, ioeventfd->addr);
|
||||
break;
|
||||
#endif
|
||||
}
|
||||
@ -378,11 +448,13 @@ long vfio_pci_ioeventfd(struct vfio_pci_device *vdev, loff_t offset,
|
||||
goto out_unlock;
|
||||
}
|
||||
|
||||
ioeventfd->vdev = vdev;
|
||||
ioeventfd->addr = vdev->barmap[bar] + pos;
|
||||
ioeventfd->data = data;
|
||||
ioeventfd->pos = pos;
|
||||
ioeventfd->bar = bar;
|
||||
ioeventfd->count = count;
|
||||
ioeventfd->test_mem = vdev->pdev->resource[bar].flags & IORESOURCE_MEM;
|
||||
|
||||
ret = vfio_virqfd_enable(ioeventfd, vfio_pci_ioeventfd_handler,
|
||||
NULL, NULL, &ioeventfd->virqfd, fd);
|
||||
|
Loading…
Reference in New Issue
Block a user