dt-bindings: serial: atmel,at91-usart: convert to json-schema
Convert at91 USART DT Binding for Atmel/Microchip SoCs to json-schema format. Furthermore, move this binding to the serial directory, since binding directories match hardware, unlike the driver subsystems which match Linux convention. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220922113347.144383-3-sergiu.moga@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Sergiu Moga
Greg Kroah-Hartman
parent
316ae95c17
commit
b9e947fbf0
@ -1,98 +0,0 @@
|
||||
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
|
||||
|
||||
Required properties for USART:
|
||||
- compatible: Should be one of the following:
|
||||
- "atmel,at91rm9200-usart"
|
||||
- "atmel,at91sam9260-usart"
|
||||
- "microchip,sam9x60-usart"
|
||||
- "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
|
||||
- "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
|
||||
- "microchip,sam9x60-dbgu", "microchip,sam9x60-usart"
|
||||
- reg: Should contain registers location and length
|
||||
- interrupts: Should contain interrupt
|
||||
- clock-names: tuple listing input clock names.
|
||||
Required elements: "usart"
|
||||
- clocks: phandles to input clocks.
|
||||
|
||||
Required properties for USART in SPI mode:
|
||||
- #size-cells : Must be <0>
|
||||
- #address-cells : Must be <1>
|
||||
- cs-gpios: chipselects (internal cs not supported)
|
||||
- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
|
||||
|
||||
Optional properties in serial and SPI mode:
|
||||
- dma bindings for dma transfer:
|
||||
- dmas: DMA specifier, consisting of a phandle to DMA controller node,
|
||||
memory peripheral interface and USART DMA channel ID, FIFO configuration.
|
||||
The order of DMA channels is fixed. The first DMA channel must be TX
|
||||
associated channel and the second one must be RX associated channel.
|
||||
Refer to dma.txt and atmel-dma.txt for details.
|
||||
- dma-names: "tx" for TX channel.
|
||||
"rx" for RX channel.
|
||||
The order of dma-names is also fixed. The first name must be "tx"
|
||||
and the second one must be "rx" as in the examples below.
|
||||
|
||||
Optional properties in serial mode:
|
||||
- atmel,use-dma-rx: use of PDC or DMA for receiving data
|
||||
- atmel,use-dma-tx: use of PDC or DMA for transmitting data
|
||||
- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
|
||||
It will use specified PIO instead of the peripheral function pin for the USART feature.
|
||||
If unsure, don't specify this property.
|
||||
- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
|
||||
capable USARTs.
|
||||
- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
|
||||
|
||||
<chip> compatible description:
|
||||
- at91rm9200: legacy USART support
|
||||
- at91sam9260: generic USART implementation for SAM9 SoCs
|
||||
|
||||
Example:
|
||||
- use PDC:
|
||||
usart0: serial@fff8c000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfff8c000 0x4000>;
|
||||
interrupts = <7>;
|
||||
clocks = <&usart0_clk>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
|
||||
cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
|
||||
dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
|
||||
dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
|
||||
dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
|
||||
rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
- use DMA:
|
||||
usart0: serial@f001c000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf001c000 0x100>;
|
||||
interrupts = <12 4 5>;
|
||||
clocks = <&usart0_clk>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
dmas = <&dma0 2 0x3>,
|
||||
<&dma0 2 0x204>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <32>;
|
||||
};
|
||||
|
||||
- SPI mode:
|
||||
#include <dt-bindings/mfd/at91-usart.h>
|
||||
|
||||
spi0: spi@f001c000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";
|
||||
atmel,usart-mode = <AT91_USART_MODE_SPI>;
|
||||
reg = <0xf001c000 0x100>;
|
||||
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
|
||||
clocks = <&usart0_clk>;
|
||||
clock-names = "usart";
|
||||
dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
|
||||
<&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
|
||||
dma-names = "tx", "rx";
|
||||
cs-gpios = <&pioB 3 0>;
|
||||
};
|
||||
182
Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
Normal file
182
Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
Normal file
@ -0,0 +1,182 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/serial/atmel,at91-usart.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
|
||||
|
||||
maintainers:
|
||||
- Richard Genoud <richard.genoud@gmail.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- enum:
|
||||
- atmel,at91rm9200-usart
|
||||
- atmel,at91sam9260-usart
|
||||
- microchip,sam9x60-usart
|
||||
- items:
|
||||
- const: atmel,at91rm9200-dbgu
|
||||
- const: atmel,at91rm9200-usart
|
||||
- items:
|
||||
- const: atmel,at91sam9260-dbgu
|
||||
- const: atmel,at91sam9260-usart
|
||||
- items:
|
||||
- const: microchip,sam9x60-dbgu
|
||||
- const: microchip,sam9x60-usart
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clock-names:
|
||||
const: usart
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
dmas:
|
||||
items:
|
||||
- description: TX DMA Channel
|
||||
- description: RX DMA Channel
|
||||
|
||||
dma-names:
|
||||
items:
|
||||
- const: tx
|
||||
- const: rx
|
||||
|
||||
atmel,usart-mode:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
Must be either <AT91_USART_MODE_SPI> for SPI or
|
||||
<AT91_USART_MODE_SERIAL> for USART (found in dt-bindings/mfd/at91-usart.h).
|
||||
enum: [ 0, 1 ]
|
||||
|
||||
atmel,use-dma-rx:
|
||||
type: boolean
|
||||
description: use of PDC or DMA for receiving data
|
||||
|
||||
atmel,use-dma-tx:
|
||||
type: boolean
|
||||
description: use of PDC or DMA for transmitting data
|
||||
|
||||
atmel,fifo-size:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
Maximum number of data the RX and TX FIFOs can store for FIFO
|
||||
capable USARTS.
|
||||
enum: [ 16, 32 ]
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clock-names
|
||||
- clocks
|
||||
- atmel,usart-mode
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
atmel,usart-mode:
|
||||
const: 1
|
||||
then:
|
||||
allOf:
|
||||
- $ref: /schemas/spi/spi-controller.yaml#
|
||||
|
||||
properties:
|
||||
atmel,use-dma-rx: false
|
||||
|
||||
atmel,use-dma-tx: false
|
||||
|
||||
atmel,fifo-size: false
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
required:
|
||||
- "#size-cells"
|
||||
- "#address-cells"
|
||||
|
||||
else:
|
||||
allOf:
|
||||
- $ref: /schemas/serial/serial.yaml#
|
||||
- $ref: /schemas/serial/rs485.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/mfd/at91-usart.h>
|
||||
#include <dt-bindings/dma/at91.h>
|
||||
|
||||
/* use PDC */
|
||||
usart0: serial@fff8c000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xfff8c000 0x4000>;
|
||||
atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
|
||||
interrupts = <7>;
|
||||
clocks = <&usart0_clk>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
|
||||
cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
|
||||
dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
|
||||
dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
|
||||
dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
|
||||
rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/mfd/at91-usart.h>
|
||||
#include <dt-bindings/dma/at91.h>
|
||||
|
||||
/* use DMA */
|
||||
usart1: serial@f001c000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf001c000 0x100>;
|
||||
atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
|
||||
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
|
||||
clocks = <&usart0_clk>;
|
||||
clock-names = "usart";
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
|
||||
<&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
|
||||
dma-names = "tx", "rx";
|
||||
atmel,fifo-size = <32>;
|
||||
};
|
||||
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/mfd/at91-usart.h>
|
||||
#include <dt-bindings/dma/at91.h>
|
||||
|
||||
/* SPI mode */
|
||||
spi0: spi@f001c000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf001c000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
atmel,usart-mode = <AT91_USART_MODE_SPI>;
|
||||
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
|
||||
clocks = <&usart0_clk>;
|
||||
clock-names = "usart";
|
||||
dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
|
||||
<&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
|
||||
dma-names = "tx", "rx";
|
||||
cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user