From b991f8c3622c8c9d01a1ada382682a731932e651 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 10 Mar 2021 09:16:54 +0100 Subject: [PATCH] pinctrl: core: Handling pinmux and pinconf separately Right now the handling order depends on how entries are coming which is corresponding with order in DT. We have reached the case with DT overlays where conf and mux descriptions are exchanged which ends up in sequence that firmware has been asked to perform configuration before requesting the pin. The patch is enforcing the order that pin is requested all the time first followed by pin configuration. This change will ensure that firmware gets requests in the right order. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/cfbe01f791c2dd42a596cbda57e15599969b57aa.1615364211.git.michal.simek@xilinx.com Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 6ddf2bc36f15..9063d8f86e60 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -1258,13 +1258,34 @@ static int pinctrl_commit_state(struct pinctrl *p, struct pinctrl_state *state) p->state = NULL; - /* Apply all the settings for the new state */ + /* Apply all the settings for the new state - pinmux first */ list_for_each_entry(setting, &state->settings, node) { switch (setting->type) { case PIN_MAP_TYPE_MUX_GROUP: ret = pinmux_enable_setting(setting); break; case PIN_MAP_TYPE_CONFIGS_PIN: + case PIN_MAP_TYPE_CONFIGS_GROUP: + break; + default: + ret = -EINVAL; + break; + } + + if (ret < 0) + goto unapply_new_state; + + /* Do not link hogs (circular dependency) */ + if (p != setting->pctldev->p) + pinctrl_link_add(setting->pctldev, p->dev); + } + + /* Apply all the settings for the new state - pinconf after */ + list_for_each_entry(setting, &state->settings, node) { + switch (setting->type) { + case PIN_MAP_TYPE_MUX_GROUP: + break; + case PIN_MAP_TYPE_CONFIGS_PIN: case PIN_MAP_TYPE_CONFIGS_GROUP: ret = pinconf_apply_setting(setting); break;