leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM: arm-soc: multiplatform conversion patches

Browse Source 
Here are more patches in the progression towards multiplatform, sparse
 irq conversions in particular.
 
 Tegra has a handful of cleanups and general groundwork, but is
 not quite there yet on full enablement.
 
 Platforms that are enabled through this branch are VT8500 and Zynq. note
 that i.MX was converted in one of the earlier cleanup branches as
 well (before we started a separate topic for multiplatform). And both
 new platforms for this merge window, sunxi and bcm, were merged with
 multiplatform support enabled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySb/AAoJEIwa5zzehBx3Wo4P/0GrpUhB/qwuhgy43MA2I1Dv
 tnyuFvsfW9uRExcw2IwT39GFls98QUM9TwQxPqOTHVf+u0LkYMZ9aDeWJOdj3RvG
 H70Ypj4gZDrzZAFr2TUf8NnYGHd6G2EcMn3261Hjfd7YrswCjsMPvgRns7VOyHCa
 deif3KcLu3+HzxvuzqlVlTuSAagCQbfqqnTQduMRdJPHT3X3sXwl7ABW+qfOoeYC
 rjqIbjdh5dB1d/f7igtgBbXjSTnVz/Mr1+wk4rp9Xr1Wv0IXvIaSKjK2Df8ZuNAk
 aQ6mMy/oDVxlDSrYv0F7lB40/rsZcPqz8+fgYJ2FnvCpIM7z7NeTWD2kQJ2UaQ/s
 VunShloRxF8It6104EVWZDfEA9NvVBcCALSze0NukqiHZRZYGUzxRNQDrncaksC9
 Lm+Z16cUWogsZq7VDCgXYQJeakPQfBDnsx7siMvAbOgvtpSClxuwhdC/czJiix7h
 BcpA+l5xSviUhHvzHhDt9iJxHjbUmo1xLDvaZSgj2OjAj257JcwaNBCk5BjZTCwe
 xZmQu1FjwaGtjLiG6QY0WJRsq1hiFRIb/MaWar/WpfqADFqARoambGFUjOl+P4Mu
 DIM5Z0AS04H+pLuP1QOz/yXxOPEP6Ri36to6XrgzfL/XGet5LW2P59xXxhcWC/OL
 /3IAcQrsAqh4aGMOstW1
 =UJlh
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform conversion patches from Olof Johansson:
 "Here are more patches in the progression towards multiplatform, sparse
  irq conversions in particular.

  Tegra has a handful of cleanups and general groundwork, but is not
  quite there yet on full enablement.

  Platforms that are enabled through this branch are VT8500 and Zynq.
  Note that i.MX was converted in one of the earlier cleanup branches as
  well (before we started a separate topic for multiplatform).  And both
  new platforms for this merge window, sunxi and bcm, were merged with
  multiplatform support enabled."

Fix up conflicts mostly as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: tegra: move debug-macro.S to include/debug
  ARM: tegra: don't include iomap.h from debug-macro.S
  ARM: tegra: decouple uncompress.h and debug-macro.S
  ARM: tegra: simplify DEBUG_LL UART selection options
  ARM: tegra: select SPARSE_IRQ
  ARM: tegra: enhance timer.c to get IO address from device tree
  ARM: tegra: enhance timer.c to get IRQ info from device tree
  ARM: timer: fix checkpatch warnings
  ARM: tegra: add TWD to device tree
  ARM: tegra: define DT bindings for and instantiate RTC
  ARM: tegra: define DT bindings for and instantiate timer
  clocksource/mtu-nomadik: use apb_pclk
  clk: ux500: Register mtu apb_pclocks
  ARM: plat-nomadik: convert platforms to SPARSE_IRQ
  mfd/db8500-prcmu: use the irq_domain_add_simple()
  mfd/ab8500-core: use irq_domain_add_simple()
  ...
This commit is contained in:
Linus Torvalds 2012-12-13 10:57:16 -08:00
commit b8edf848e9
69 changed files with 655 additions and 868 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt Normal file
View File

@ -0,0 +1,19 @@
NVIDIA Tegra20 real-time clock
The Tegra RTC maintains seconds and milliseconds counters, and five alarm
registers. The alarms and other interrupts may wake the system from low-power
state.
Required properties:
- compatible : should be "nvidia,tegra20-rtc".
- reg : Specifies base physical address and size of the registers.
- interrupts : A single interrupt specifier.
Example:
timer {
compatible = "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
};

21
Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt Normal file
View File

@ -0,0 +1,21 @@
NVIDIA Tegra20 timer
The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free
running counter. The first two channels may also trigger a watchdog reset.
Required properties:
- compatible : should be "nvidia,tegra20-timer".
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 4 interrupts; one per timer channel.
Example:
timer {
compatible = "nvidia,tegra20-timer";
reg = <0x60005000 0x60>;
interrupts = <0 0 0x04
0 1 0x04
0 41 0x04
0 42 0x04>;
};

23
Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt Normal file
View File

@ -0,0 +1,23 @@
NVIDIA Tegra30 timer
The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
running counter, and 5 watchdog modules. The first two channels may also
trigger a legacy watchdog reset.
Required properties:
- compatible : should be "nvidia,tegra30-timer", "nvidia,tegra20-timer".
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 6 interrupts; one per each of timer channels 1
through 5, and one for the shared interrupt for the remaining channels.
timer {
compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
reg = <0x60005000 0x400>;
interrupts = <0 0 0x04
0 1 0x04
0 41 0x04
0 42 0x04
0 121 0x04
0 122 0x04>;
};

24
arch/arm/Kconfig
View File

@ -650,6 +650,7 @@ config ARCH_TEGRA
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select SPARSE_IRQ
select USE_OF
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
@ -891,6 +892,7 @@ config ARCH_U8500
select GENERIC_CLOCKEVENTS
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select SPARSE_IRQ
help
Support for ST-Ericsson's Ux500 architecture
@ -905,6 +907,7 @@ config ARCH_NOMADIK
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_STN8815
select SPARSE_IRQ
help
Support for the Nomadik platform by ST-Ericsson
@ -948,7 +951,7 @@ config ARCH_OMAP
help
Support for TI's OMAP platform (OMAP1/2/3/4).
config ARCH_VT8500
config ARCH_VT8500_SINGLE
bool "VIA/WonderMedia 85xx"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
@ -958,22 +961,12 @@ config ARCH_VT8500
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform"
select ARM_AMBA
select ARM_GIC
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select ICST
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
help
Support for Xilinx Zynq ARM Cortex A9 Platform
endchoice
menu "Multiple platform selection"
@ -1074,7 +1067,6 @@ source "arch/arm/mach-mxs/Kconfig"
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/plat-nomadik/Kconfig"
source "arch/arm/plat-omap/Kconfig"
@ -1137,8 +1129,12 @@ source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-vexpress/Kconfig"
source "arch/arm/plat-versatile/Kconfig"
source "arch/arm/mach-vt8500/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
# Definitions to make life easier
config ARCH_ACORN
bool

39
arch/arm/Kconfig.debug
View File

@ -379,6 +379,13 @@ choice
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART1.
config DEBUG_TEGRA_UART
depends on ARCH_TEGRA
bool "Use Tegra UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
@ -452,6 +459,36 @@ config DEBUG_IMX6Q_UART_PORT
Choose UART port on which kernel low-level debug messages
should be output.
choice
prompt "Low-level debug console UART"
depends on DEBUG_LL && DEBUG_TEGRA_UART
config TEGRA_DEBUG_UART_AUTO_ODMDATA
bool "Via ODMDATA"
help
Automatically determines which UART to use for low-level debug based
on the ODMDATA value. This value is part of the BCT, and is written
to the boot memory device using nvflash, or other flashing tool.
When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
0/1/2/3/4 are UART A/B/C/D/E.
config TEGRA_DEBUG_UARTA
bool "UART A"
config TEGRA_DEBUG_UARTB
bool "UART B"
config TEGRA_DEBUG_UARTC
bool "UART C"
config TEGRA_DEBUG_UARTD
bool "UART D"
config TEGRA_DEBUG_UARTE
bool "UART E"
endchoice
config DEBUG_LL_INCLUDE
string
default "debug/icedcc.S" if DEBUG_ICEDCC
@ -469,6 +506,8 @@ config DEBUG_LL_INCLUDE
default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
default "debug/tegra.S" if DEBUG_TEGRA_UART
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
default "mach/debug-macro.S"
config EARLY_PRINTK

1
arch/arm/Makefile
View File

@ -202,7 +202,6 @@ machine-$(CONFIG_ARCH_SUNXI) += sunxi
plat-$(CONFIG_ARCH_OMAP) += omap
plat-$(CONFIG_ARCH_S3C64XX) += samsung
plat-$(CONFIG_PLAT_IOP) += iop
plat-$(CONFIG_PLAT_NOMADIK) += nomadik
plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_S3C24XX) += s3c24xx samsung

21
arch/arm/boot/dts/tegra20.dtsi
View File

@ -91,6 +91,12 @@
};
};
timer@50004600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0x304>;
};
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
@ -108,6 +114,15 @@
#interrupt-cells = <3>;
};
timer@60005000 {
compatible = "nvidia,tegra20-timer";
reg = <0x60005000 0x60>;
interrupts = <0 0 0x04
0 1 0x04
0 41 0x04
0 42 0x04>;
};
apbdma: dma {
compatible = "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1200>;
@ -225,6 +240,12 @@
#pwm-cells = <2>;
};
rtc {
compatible = "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
};
i2c@7000c000 {
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;

23
arch/arm/boot/dts/tegra30.dtsi
View File

@ -91,6 +91,12 @@
};
};
timer@50004600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0xf04>;
};
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
@ -108,6 +114,17 @@
#interrupt-cells = <3>;
};
timer@60005000 {
compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
reg = <0x60005000 0x400>;
interrupts = <0 0 0x04
0 1 0x04
0 41 0x04
0 42 0x04
0 121 0x04
0 122 0x04>;
};
apbdma: dma {
compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1400>;
@ -219,6 +236,12 @@
#pwm-cells = <2>;
};
rtc {
compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
};
i2c@7000c000 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;

223
arch/arm/include/debug/tegra.S Normal file
View File

@ -0,0 +1,223 @@
/*
* Copyright (C) 2010,2011 Google, Inc.
* Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
* Doug Anderson <dianders@chromium.org>
* Stephen Warren <swarren@nvidia.com>
*
* Portions based on mach-omap2's debug-macro.S
* Copyright (C) 1994-1999 Russell King
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/serial_reg.h>
#define UART_SHIFT 2
/* Physical addresses */
#define TEGRA_CLK_RESET_BASE 0x60006000
#define TEGRA_APB_MISC_BASE 0x70000000
#define TEGRA_UARTA_BASE 0x70006000
#define TEGRA_UARTB_BASE 0x70006040
#define TEGRA_UARTC_BASE 0x70006200
#define TEGRA_UARTD_BASE 0x70006300
#define TEGRA_UARTE_BASE 0x70006400
#define TEGRA_PMC_BASE 0x7000e400
#define TEGRA_CLK_RST_DEVICES_L (TEGRA_CLK_RESET_BASE + 0x04)
#define TEGRA_CLK_RST_DEVICES_H (TEGRA_CLK_RESET_BASE + 0x08)
#define TEGRA_CLK_RST_DEVICES_U (TEGRA_CLK_RESET_BASE + 0x0c)
#define TEGRA_CLK_OUT_ENB_L (TEGRA_CLK_RESET_BASE + 0x10)
#define TEGRA_CLK_OUT_ENB_H (TEGRA_CLK_RESET_BASE + 0x14)
#define TEGRA_CLK_OUT_ENB_U (TEGRA_CLK_RESET_BASE + 0x18)
#define TEGRA_PMC_SCRATCH20 (TEGRA_PMC_BASE + 0xa0)
#define TEGRA_APB_MISC_GP_HIDREV (TEGRA_APB_MISC_BASE + 0x804)
/*
* Must be 1MB-aligned since a 1MB mapping is used early on.
* Must not overlap with regions in mach-tegra/io.c:tegra_io_desc[].
*/
#define UART_VIRTUAL_BASE 0xfe100000
#define checkuart(rp, rv, lhu, bit, uart) \
/* Load address of CLK_RST register */ \
movw rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \
movt rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \
/* Load value from CLK_RST register */ \
ldr rp, [rp, #0] ; \
/* Test UART's reset bit */ \
tst rp, #(1 << bit) ; \
/* If set, can't use UART; jump to save no UART */ \
bne 90f ; \
/* Load address of CLK_OUT_ENB register */ \
movw rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \
movt rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \
/* Load value from CLK_OUT_ENB register */ \
ldr rp, [rp, #0] ; \
/* Test UART's clock enable bit */ \
tst rp, #(1 << bit) ; \
/* If clear, can't use UART; jump to save no UART */ \
beq 90f ; \
/* Passed all tests, load address of UART registers */ \
movw rp, #TEGRA_UART##uart##_BASE & 0xffff ; \
movt rp, #TEGRA_UART##uart##_BASE >> 16 ; \
/* Jump to save UART address */ \
b 91f
.macro addruart, rp, rv, tmp
adr \rp, 99f @ actual addr of 99f
ldr \rv, [\rp] @ linked addr is stored there
sub \rv, \rv, \rp @ offset between the two
ldr \rp, [\rp, #4] @ linked tegra_uart_config
sub \tmp, \rp, \rv @ actual tegra_uart_config
ldr \rp, [\tmp] @ Load tegra_uart_config
cmp \rp, #1 @ needs initialization?
bne 100f @ no; go load the addresses
mov \rv, #0 @ yes; record init is done
str \rv, [\tmp]
#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
/* Check ODMDATA */
10: movw \rp, #TEGRA_PMC_SCRATCH20 & 0xffff
movt \rp, #TEGRA_PMC_SCRATCH20 >> 16
ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20
ubfx \rv, \rp, #18, #2 @ 19:18 are console type
cmp \rv, #2 @ 2 and 3 mean DCC, UART
beq 11f @ some boards swap the meaning
cmp \rv, #3 @ so accept either
bne 90f
11: ubfx \rv, \rp, #15, #3 @ 17:15 are UART ID
cmp \rv, #0 @ UART 0?
beq 20f
cmp \rv, #1 @ UART 1?
beq 21f
cmp \rv, #2 @ UART 2?
beq 22f
cmp \rv, #3 @ UART 3?
beq 23f
cmp \rv, #4 @ UART 4?
beq 24f
b 90f @ invalid
#endif
#if defined(CONFIG_TEGRA_DEBUG_UARTA) || \
defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
/* Check UART A validity */
20: checkuart(\rp, \rv, L, 6, A)
#endif
#if defined(CONFIG_TEGRA_DEBUG_UARTB) || \
defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
/* Check UART B validity */
21: checkuart(\rp, \rv, L, 7, B)
#endif
#if defined(CONFIG_TEGRA_DEBUG_UARTC) || \
defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
/* Check UART C validity */
22: checkuart(\rp, \rv, H, 23, C)
#endif
#if defined(CONFIG_TEGRA_DEBUG_UARTD) || \
defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
/* Check UART D validity */
23: checkuart(\rp, \rv, U, 1, D)
#endif
#if defined(CONFIG_TEGRA_DEBUG_UARTE) || \
defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
/* Check UART E validity */
24:
checkuart(\rp, \rv, U, 2, E)
#endif
/* No valid UART found */
90: mov \rp, #0
/* fall through */
/* Record whichever UART we chose */
91: str \rp, [\tmp, #4] @ Store in tegra_uart_phys
cmp \rp, #0 @ Valid UART address?
bne 92f @ Yes, go process it
str \rp, [\tmp, #8] @ Store 0 in tegra_uart_virt
b 100f @ Done
92: and \rv, \rp, #0xffffff @ offset within 1MB section
add \rv, \rv, #UART_VIRTUAL_BASE
str \rv, [\tmp, #8] @ Store in tegra_uart_virt
movw \rv, #TEGRA_APB_MISC_GP_HIDREV & 0xffff
movt \rv, #TEGRA_APB_MISC_GP_HIDREV >> 16
ldr \rv, [\rv, #0] @ Load HIDREV
ubfx \rv, \rv, #8, #8 @ 15:8 are SoC version
cmp \rv, #0x20 @ Tegra20?
moveq \rv, #0x75 @ Tegra20 divisor
movne \rv, #0xdd @ Tegra30 divisor
str \rv, [\tmp, #12] @ Save divisor to scratch
/* uart[UART_LCR] = UART_LCR_WLEN8 | UART_LCR_DLAB; */
mov \rv, #UART_LCR_WLEN8 | UART_LCR_DLAB
str \rv, [\rp, #UART_LCR << UART_SHIFT]
/* uart[UART_DLL] = div & 0xff; */
ldr \rv, [\tmp, #12]
and \rv, \rv, #0xff
str \rv, [\rp, #UART_DLL << UART_SHIFT]
/* uart[UART_DLM] = div >> 8; */
ldr \rv, [\tmp, #12]
lsr \rv, \rv, #8
str \rv, [\rp, #UART_DLM << UART_SHIFT]
/* uart[UART_LCR] = UART_LCR_WLEN8; */
mov \rv, #UART_LCR_WLEN8
str \rv, [\rp, #UART_LCR << UART_SHIFT]
b 100f
.align
99: .word .
.word tegra_uart_config
.ltorg
/* Load previously selected UART address */
100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
.endm
/*
* Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
* check to make sure that the UART address is actually valid.
*/
.macro senduart, rd, rx
cmp \rx, #0
strneb \rd, [\rx, #UART_TX << UART_SHIFT]
1001:
.endm
.macro busyuart, rd, rx
cmp \rx, #0
beq 1002f
1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
bne 1001b
1002:
.endm
.macro waituart, rd, rx
#ifdef FLOW_CONTROL
cmp \rx, #0
beq 1002f
1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
tst \rd, #UART_MSR_CTS
beq 1001b
1002:
#endif
.endm

23
arch/arm/mach-zynq/include/mach/debug-macro.S → arch/arm/include/debug/zynq.S
View File

@ -1,5 +1,4 @@
/* arch/arm/mach-zynq/include/mach/debug-macro.S
*
/*
* Debugging macro include header
*
* Copyright (C) 2011 Xilinx
@ -13,9 +12,25 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */
#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */
#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */
#include <mach/zynq_soc.h>
#include <mach/uart.h>
#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */
#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
#define UART0_PHYS 0xE0000000
#define UART1_PHYS 0xE0001000
#define UART_SIZE SZ_4K
#define UART_VIRT 0xF0001000
#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
# define LL_UART_PADDR UART1_PHYS
#else
# define LL_UART_PADDR UART0_PHYS
#endif
#define LL_UART_VADDR UART_VIRT
.macro addruart, rp, rv, tmp
ldr \rp, =LL_UART_PADDR @ physical

2
arch/arm/mach-nomadik/Kconfig
View File

@ -4,7 +4,7 @@ menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
select HAS_MTU
select CLKSRC_NOMADIK_MTU
select NOMADIK_8815
endmenu

10
arch/arm/mach-nomadik/board-nhk8815.c
View File

@ -25,18 +25,16 @@
#include <linux/io.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
#include <linux/platform_data/mtd-nomadik-nand.h>
#include <asm/hardware/vic.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
#include <plat/mtu.h>
#include <linux/platform_data/mtd-nomadik-nand.h>
#include <mach/fsmc.h>
#include <mach/irqs.h>
#include "cpu-8815.h"
@ -260,7 +258,7 @@ static void __init nomadik_timer_init(void)
src_cr |= SRC_CR_INIT_VAL;
writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE));
nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
}
static struct sys_timer nomadik_timer = {

2
arch/arm/mach-nomadik/include/mach/irqs.h
View File

@ -72,7 +72,7 @@
#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */
#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET)
#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET)
#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
#define NOMADIK_NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
/* Following two are used by entry_macro.S, to access our dual-vic */
#define VIC_REG_IRQSR0 0

51
arch/arm/mach-tegra/Kconfig
View File

@ -57,57 +57,6 @@ config TEGRA_AHB
which controls AHB bus master arbitration and some
perfomance parameters(priority, prefech size).
choice
prompt "Default low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
config TEGRA_DEBUG_UART_NONE
bool "None"
config TEGRA_DEBUG_UARTA
bool "UART-A"
config TEGRA_DEBUG_UARTB
bool "UART-B"
config TEGRA_DEBUG_UARTC
bool "UART-C"
config TEGRA_DEBUG_UARTD
bool "UART-D"
config TEGRA_DEBUG_UARTE
bool "UART-E"
endchoice
choice
prompt "Automatic low-level debug console UART"
default TEGRA_DEBUG_UART_AUTO_NONE
config TEGRA_DEBUG_UART_AUTO_NONE
bool "None"
config TEGRA_DEBUG_UART_AUTO_ODMDATA
bool "Via ODMDATA"
help
Automatically determines which UART to use for low-level debug based
on the ODMDATA value. This value is part of the BCT, and is written
to the boot memory device using nvflash, or other flashing tool.
When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
0/1/2/3/4 are UART A/B/C/D/E.
config TEGRA_DEBUG_UART_AUTO_SCRATCH
bool "Via UART scratch register"
help
Automatically determines which UART to use for low-level debug based
on the UART scratch register value. Some bootloaders put ASCII 'D'
in this register when they initialize their own console UART output.
Using this option allows the kernel to automatically pick the same
UART.
endchoice
config TEGRA_EMC_SCALING_ENABLE
bool "Enable scaling the memory frequency"

9
arch/arm/mach-tegra/common.c
View File

@ -45,14 +45,15 @@
* kernel is loaded. The data is declared here rather than debug-macro.S so
* that multiple inclusions of debug-macro.S point at the same data.
*/
#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF)
u32 tegra_uart_config[3] = {
u32 tegra_uart_config[4] = {
/* Debug UART initialization required */
1,
/* Debug UART physical address */
(u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET),
0,
/* Debug UART virtual address */
(u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET),
0,
/* Scratch space for debug macro */
0,
};
#ifdef CONFIG_OF

100
arch/arm/mach-tegra/include/mach/debug-macro.S
View File

@ -1,100 +0,0 @@
/*
* arch/arm/mach-tegra/include/mach/debug-macro.S
*
* Copyright (C) 2010,2011 Google, Inc.
* Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
* Doug Anderson <dianders@chromium.org>
* Stephen Warren <swarren@nvidia.com>
*
* Portions based on mach-omap2's debug-macro.S
* Copyright (C) 1994-1999 Russell King
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/serial_reg.h>
#include "../../iomap.h"
#include "../../irammap.h"
.macro addruart, rp, rv, tmp
adr \rp, 99f @ actual addr of 99f
ldr \rv, [\rp] @ linked addr is stored there
sub \rv, \rv, \rp @ offset between the two
ldr \rp, [\rp, #4] @ linked tegra_uart_config
sub \tmp, \rp, \rv @ actual tegra_uart_config
ldr \rp, [\tmp] @ Load tegra_uart_config
cmp \rp, #1 @ needs intitialization?
bne 100f @ no; go load the addresses
mov \rv, #0 @ yes; record init is done
str \rv, [\tmp]
mov \rp, #TEGRA_IRAM_BASE @ See if cookie is in IRAM
ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET]
movw \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff
movt \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16
cmp \rv, \rp @ Cookie present?
bne 100f @ No, use default UART
mov \rp, #TEGRA_IRAM_BASE @ Load UART address from IRAM
ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4]
str \rv, [\tmp, #4] @ Store in tegra_uart_phys
sub \rv, \rv, #IO_APB_PHYS @ Calculate virt address
add \rv, \rv, #IO_APB_VIRT
str \rv, [\tmp, #8] @ Store in tegra_uart_virt
b 100f
.align
99: .word .
.word tegra_uart_config
.ltorg
100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
.endm
#define UART_SHIFT 2
/*
* Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
* check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case.
* We use the fact that all 5 valid UART addresses all have something in the
* 2nd-to-lowest byte.
*/
.macro senduart, rd, rx
tst \rx, #0x0000ff00
strneb \rd, [\rx, #UART_TX << UART_SHIFT]
1001:
.endm
.macro busyuart, rd, rx
tst \rx, #0x0000ff00
beq 1002f
1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
bne 1001b
1002:
.endm
.macro waituart, rd, rx
#ifdef FLOW_CONTROL
tst \rx, #0x0000ff00
beq 1002f
1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
tst \rd, #UART_MSR_CTS
beq 1001b
1002:
#endif
.endm

182
arch/arm/mach-tegra/include/mach/irqs.h
View File

@ -1,182 +0,0 @@
/*
* arch/arm/mach-tegra/include/mach/irqs.h
*
* Copyright (C) 2010 Google, Inc.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __MACH_TEGRA_IRQS_H
#define __MACH_TEGRA_IRQS_H
#define INT_GIC_BASE 0
#define IRQ_LOCALTIMER 29
/* Primary Interrupt Controller */
#define INT_PRI_BASE (INT_GIC_BASE + 32)
#define INT_TMR1 (INT_PRI_BASE + 0)
#define INT_TMR2 (INT_PRI_BASE + 1)
#define INT_RTC (INT_PRI_BASE + 2)
#define INT_I2S2 (INT_PRI_BASE + 3)
#define INT_SHR_SEM_INBOX_IBF (INT_PRI_BASE + 4)
#define INT_SHR_SEM_INBOX_IBE (INT_PRI_BASE + 5)
#define INT_SHR_SEM_OUTBOX_IBF (INT_PRI_BASE + 6)
#define INT_SHR_SEM_OUTBOX_IBE (INT_PRI_BASE + 7)
#define INT_VDE_UCQ_ERROR (INT_PRI_BASE + 8)
#define INT_VDE_SYNC_TOKEN (INT_PRI_BASE + 9)
#define INT_VDE_BSE_V (INT_PRI_BASE + 10)
#define INT_VDE_BSE_A (INT_PRI_BASE + 11)
#define INT_VDE_SXE (INT_PRI_BASE + 12)
#define INT_I2S1 (INT_PRI_BASE + 13)
#define INT_SDMMC1 (INT_PRI_BASE + 14)
#define INT_SDMMC2 (INT_PRI_BASE + 15)
#define INT_XIO (INT_PRI_BASE + 16)
#define INT_VDE (INT_PRI_BASE + 17)
#define INT_AVP_UCQ (INT_PRI_BASE + 18)
#define INT_SDMMC3 (INT_PRI_BASE + 19)
#define INT_USB (INT_PRI_BASE + 20)
#define INT_USB2 (INT_PRI_BASE + 21)
#define INT_PRI_RES_22 (INT_PRI_BASE + 22)
#define INT_EIDE (INT_PRI_BASE + 23)
#define INT_NANDFLASH (INT_PRI_BASE + 24)
#define INT_VCP (INT_PRI_BASE + 25)
#define INT_APB_DMA (INT_PRI_BASE + 26)
#define INT_AHB_DMA (INT_PRI_BASE + 27)
#define INT_GNT_0 (INT_PRI_BASE + 28)
#define INT_GNT_1 (INT_PRI_BASE + 29)
#define INT_OWR (INT_PRI_BASE + 30)
#define INT_SDMMC4 (INT_PRI_BASE + 31)
/* Secondary Interrupt Controller */
#define INT_SEC_BASE (INT_PRI_BASE + 32)
#define INT_GPIO1 (INT_SEC_BASE + 0)
#define INT_GPIO2 (INT_SEC_BASE + 1)
#define INT_GPIO3 (INT_SEC_BASE + 2)
#define INT_GPIO4 (INT_SEC_BASE + 3)
#define INT_UARTA (INT_SEC_BASE + 4)
#define INT_UARTB (INT_SEC_BASE + 5)
#define INT_I2C (INT_SEC_BASE + 6)
#define INT_SPI (INT_SEC_BASE + 7)
#define INT_TWC (INT_SEC_BASE + 8)
#define INT_TMR3 (INT_SEC_BASE + 9)
#define INT_TMR4 (INT_SEC_BASE + 10)
#define INT_FLOW_RSM0 (INT_SEC_BASE + 11)
#define INT_FLOW_RSM1 (INT_SEC_BASE + 12)
#define INT_SPDIF (INT_SEC_BASE + 13)
#define INT_UARTC (INT_SEC_BASE + 14)
#define INT_MIPI (INT_SEC_BASE + 15)
#define INT_EVENTA (INT_SEC_BASE + 16)
#define INT_EVENTB (INT_SEC_BASE + 17)
#define INT_EVENTC (INT_SEC_BASE + 18)
#define INT_EVENTD (INT_SEC_BASE + 19)
#define INT_VFIR (INT_SEC_BASE + 20)
#define INT_DVC (INT_SEC_BASE + 21)
#define INT_SYS_STATS_MON (INT_SEC_BASE + 22)
#define INT_GPIO5 (INT_SEC_BASE + 23)
#define INT_CPU0_PMU_INTR (INT_SEC_BASE + 24)
#define INT_CPU1_PMU_INTR (INT_SEC_BASE + 25)
#define INT_SEC_RES_26 (INT_SEC_BASE + 26)
#define INT_S_LINK1 (INT_SEC_BASE + 27)
#define INT_APB_DMA_COP (INT_SEC_BASE + 28)
#define INT_AHB_DMA_COP (INT_SEC_BASE + 29)
#define INT_DMA_TX (INT_SEC_BASE + 30)
#define INT_DMA_RX (INT_SEC_BASE + 31)
/* Tertiary Interrupt Controller */
#define INT_TRI_BASE (INT_SEC_BASE + 32)
#define INT_HOST1X_COP_SYNCPT (INT_TRI_BASE + 0)
#define INT_HOST1X_MPCORE_SYNCPT (INT_TRI_BASE + 1)
#define INT_HOST1X_COP_GENERAL (INT_TRI_BASE + 2)
#define INT_HOST1X_MPCORE_GENERAL (INT_TRI_BASE + 3)
#define INT_MPE_GENERAL (INT_TRI_BASE + 4)
#define INT_VI_GENERAL (INT_TRI_BASE + 5)
#define INT_EPP_GENERAL (INT_TRI_BASE + 6)
#define INT_ISP_GENERAL (INT_TRI_BASE + 7)
#define INT_2D_GENERAL (INT_TRI_BASE + 8)
#define INT_DISPLAY_GENERAL (INT_TRI_BASE + 9)
#define INT_DISPLAY_B_GENERAL (INT_TRI_BASE + 10)
#define INT_HDMI (INT_TRI_BASE + 11)
#define INT_TVO_GENERAL (INT_TRI_BASE + 12)
#define INT_MC_GENERAL (INT_TRI_BASE + 13)
#define INT_EMC_GENERAL (INT_TRI_BASE + 14)
#define INT_TRI_RES_15 (INT_TRI_BASE + 15)
#define INT_TRI_RES_16 (INT_TRI_BASE + 16)
#define INT_AC97 (INT_TRI_BASE + 17)
#define INT_SPI_2 (INT_TRI_BASE + 18)
#define INT_SPI_3 (INT_TRI_BASE + 19)
#define INT_I2C2 (INT_TRI_BASE + 20)
#define INT_KBC (INT_TRI_BASE + 21)
#define INT_EXTERNAL_PMU (INT_TRI_BASE + 22)
#define INT_GPIO6 (INT_TRI_BASE + 23)
#define INT_TVDAC (INT_TRI_BASE + 24)
#define INT_GPIO7 (INT_TRI_BASE + 25)
#define INT_UARTD (INT_TRI_BASE + 26)
#define INT_UARTE (INT_TRI_BASE + 27)
#define INT_I2C3 (INT_TRI_BASE + 28)
#define INT_SPI_4 (INT_TRI_BASE + 29)
#define INT_TRI_RES_30 (INT_TRI_BASE + 30)
#define INT_SW_RESERVED (INT_TRI_BASE + 31)
/* Quaternary Interrupt Controller */
#define INT_QUAD_BASE (INT_TRI_BASE + 32)
#define INT_SNOR (INT_QUAD_BASE + 0)
#define INT_USB3 (INT_QUAD_BASE + 1)
#define INT_PCIE_INTR (INT_QUAD_BASE + 2)
#define INT_PCIE_MSI (INT_QUAD_BASE + 3)
#define INT_QUAD_RES_4 (INT_QUAD_BASE + 4)
#define INT_QUAD_RES_5 (INT_QUAD_BASE + 5)
#define INT_QUAD_RES_6 (INT_QUAD_BASE + 6)
#define INT_QUAD_RES_7 (INT_QUAD_BASE + 7)
#define INT_APB_DMA_CH0 (INT_QUAD_BASE + 8)
#define INT_APB_DMA_CH1 (INT_QUAD_BASE + 9)
#define INT_APB_DMA_CH2 (INT_QUAD_BASE + 10)
#define INT_APB_DMA_CH3 (INT_QUAD_BASE + 11)
#define INT_APB_DMA_CH4 (INT_QUAD_BASE + 12)
#define INT_APB_DMA_CH5 (INT_QUAD_BASE + 13)
#define INT_APB_DMA_CH6 (INT_QUAD_BASE + 14)
#define INT_APB_DMA_CH7 (INT_QUAD_BASE + 15)
#define INT_APB_DMA_CH8 (INT_QUAD_BASE + 16)
#define INT_APB_DMA_CH9 (INT_QUAD_BASE + 17)
#define INT_APB_DMA_CH10 (INT_QUAD_BASE + 18)
#define INT_APB_DMA_CH11 (INT_QUAD_BASE + 19)
#define INT_APB_DMA_CH12 (INT_QUAD_BASE + 20)
#define INT_APB_DMA_CH13 (INT_QUAD_BASE + 21)
#define INT_APB_DMA_CH14 (INT_QUAD_BASE + 22)
#define INT_APB_DMA_CH15 (INT_QUAD_BASE + 23)
#define INT_QUAD_RES_24 (INT_QUAD_BASE + 24)
#define INT_QUAD_RES_25 (INT_QUAD_BASE + 25)
#define INT_QUAD_RES_26 (INT_QUAD_BASE + 26)
#define INT_QUAD_RES_27 (INT_QUAD_BASE + 27)
#define INT_QUAD_RES_28 (INT_QUAD_BASE + 28)
#define INT_QUAD_RES_29 (INT_QUAD_BASE + 29)
#define INT_QUAD_RES_30 (INT_QUAD_BASE + 30)
#define INT_QUAD_RES_31 (INT_QUAD_BASE + 31)
/* Tegra30 has 5 banks of 32 IRQs */
#define INT_MAIN_NR (32 * 5)
#define INT_GPIO_BASE (INT_PRI_BASE + INT_MAIN_NR)
/* Tegra30 has 8 banks of 32 GPIOs */
#define INT_GPIO_NR (32 * 8)
#define TEGRA_NR_IRQS (INT_GPIO_BASE + INT_GPIO_NR)
#define INT_BOARD_BASE TEGRA_NR_IRQS
#define NR_BOARD_IRQS 32
#define NR_IRQS (INT_BOARD_BASE + NR_BOARD_IRQS)
#endif

65
arch/arm/mach-tegra/include/mach/uncompress.h
View File

@ -29,7 +29,6 @@
#include <linux/serial_reg.h>
#include "../../iomap.h"
#include "../../irammap.h"
#define BIT(x) (1 << (x))
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
@ -52,17 +51,6 @@ static inline void flush(void)
{
}
static inline void save_uart_address(void)
{
u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET);
if (uart) {
buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE;
buf[1] = (u32)uart;
} else
buf[0] = 0;
}
static const struct {
u32 base;
u32 reset_reg;
@ -139,51 +127,19 @@ int auto_odmdata(void)
}
#endif
#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH
int auto_scratch(void)
{
int i;
/*
* Look for the first UART that:
* a) Is not in reset.
* b) Is clocked.
* c) Has a 'D' in the scratchpad register.
*
* Note that on Tegra30, the first two conditions are required, since
* if not true, accesses to the UART scratch register will hang.
* Tegra20 doesn't have this issue.
*
* The intent is that the bootloader will tell the kernel which UART
* to use by setting up those conditions. If nothing found, we'll fall
* back to what's specified in TEGRA_DEBUG_UART_BASE.
*/
for (i = 0; i < ARRAY_SIZE(uarts); i++) {
if (!uart_clocked(i))
continue;
uart = (volatile u8 *)uarts[i].base;
if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
continue;
return i;
}
return -1;
}
#endif
/*
* Setup before decompression. This is where we do UART selection for
* earlyprintk and init the uart_base register.
*/
static inline void arch_decomp_setup(void)
{
int uart_id, auto_uart_id;
int uart_id;
volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
u32 chip, div;
#if defined(CONFIG_TEGRA_DEBUG_UARTA)
#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
uart_id = auto_odmdata();
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
uart_id = 0;
#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
uart_id = 1;
@ -193,27 +149,14 @@ static inline void arch_decomp_setup(void)
uart_id = 3;
#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
uart_id = 4;
#else
uart_id = -1;
#endif
#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
auto_uart_id = auto_odmdata();
#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH)
auto_uart_id = auto_scratch();
#else
auto_uart_id = -1;
#endif
if (auto_uart_id != -1)
uart_id = auto_uart_id;
if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) ||
!uart_clocked(uart_id))
uart = NULL;
else
uart = (volatile u8 *)uarts[uart_id].base;
save_uart_address();
if (uart == NULL)
return;

1
arch/arm/mach-tegra/io.c
View File

@ -59,5 +59,6 @@ static struct map_desc tegra_io_desc[] __initdata = {
void __init tegra_map_common_io(void)
{
debug_ll_io_init();
iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc));
}

14
arch/arm/mach-tegra/iomap.h
View File

@ -261,20 +261,6 @@
#define TEGRA_SDMMC4_BASE 0xC8000600
#define TEGRA_SDMMC4_SIZE SZ_512
#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
# define TEGRA_DEBUG_UART_BASE 0
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
# define TEGRA_DEBUG_UART_BASE TEGRA_UARTA_BASE
#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
# define TEGRA_DEBUG_UART_BASE TEGRA_UARTB_BASE
#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
# define TEGRA_DEBUG_UART_BASE TEGRA_UARTC_BASE
#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
# define TEGRA_DEBUG_UART_BASE TEGRA_UARTD_BASE
#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
# define TEGRA_DEBUG_UART_BASE TEGRA_UARTE_BASE
#endif
/* On TEGRA, many peripherals are very closely packed in
* two 256MB io windows (that actually only use about 64KB
* at the start of each).

9
arch/arm/mach-tegra/irammap.h
View File

@ -23,13 +23,4 @@
#define TEGRA_IRAM_RESET_HANDLER_OFFSET 0
#define TEGRA_IRAM_RESET_HANDLER_SIZE SZ_1K
/*
* These locations are written to by uncompress.h, and read by debug-macro.S.
* The first word holds the cookie value if the data is valid. The second
* word holds the UART physical address.
*/
#define TEGRA_IRAM_DEBUG_UART_OFFSET SZ_1K
#define TEGRA_IRAM_DEBUG_UART_SIZE 8
#define TEGRA_IRAM_DEBUG_UART_COOKIE 0x55415254
#endif

3
arch/arm/mach-tegra/pcie.c
View File

@ -43,6 +43,9 @@
#include "board.h"
#include "iomap.h"
/* Hack - need to parse this from DT */
#define INT_PCIE_INTR 130
/* register definitions */
#define AFI_OFFSET 0x3800
#define PADS_OFFSET 0x3000

78
arch/arm/mach-tegra/timer.c
View File

@ -26,16 +26,14 @@
#include <linux/clocksource.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/mach/time.h>
#include <asm/smp_twd.h>
#include <asm/sched_clock.h>
#include <mach/irqs.h>
#include "board.h"
#include "clock.h"
#include "iomap.h"
#define RTC_SECONDS 0x08
#define RTC_SHADOW_SECONDS 0x0c
@ -53,8 +51,8 @@
#define TIMER_PTV 0x0
#define TIMER_PCR 0x4
static void __iomem *timer_reg_base = IO_ADDRESS(TEGRA_TMR1_BASE);
static void __iomem *rtc_base = IO_ADDRESS(TEGRA_RTC_BASE);
static void __iomem *timer_reg_base;
static void __iomem *rtc_base;
static struct timespec persistent_ts;
static u64 persistent_ms, last_persistent_ms;
@ -158,40 +156,66 @@ static struct irqaction tegra_timer_irq = {
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_HIGH,
.handler = tegra_timer_interrupt,
.dev_id = &tegra_clockevent,
.irq = INT_TMR3,
};
#ifdef CONFIG_HAVE_ARM_TWD
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
TEGRA_ARM_PERIF_BASE + 0x600,
IRQ_LOCALTIMER);
static const struct of_device_id timer_match[] __initconst = {
{ .compatible = "nvidia,tegra20-timer" },
{}
};
static void __init tegra_twd_init(void)
{
int err = twd_local_timer_register(&twd_local_timer);
if (err)
pr_err("twd_local_timer_register failed %d\n", err);
}
#else
#define tegra_twd_init() do {} while(0)
#endif
static const struct of_device_id rtc_match[] __initconst = {
{ .compatible = "nvidia,tegra20-rtc" },
{}
};
static void __init tegra_init_timer(void)
{
struct device_node *np;
struct clk *clk;
unsigned long rate;
int ret;
np = of_find_matching_node(NULL, timer_match);
if (!np) {
pr_err("Failed to find timer DT node\n");
BUG();
}
timer_reg_base = of_iomap(np, 0);
if (!timer_reg_base) {
pr_err("Can't map timer registers");
BUG();
}
tegra_timer_irq.irq = irq_of_parse_and_map(np, 2);
if (tegra_timer_irq.irq <= 0) {
pr_err("Failed to map timer IRQ\n");
BUG();
}
clk = clk_get_sys("timer", NULL);
if (IS_ERR(clk)) {
pr_warn("Unable to get timer clock."
" Assuming 12Mhz input clock.\n");
pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n");
rate = 12000000;
} else {
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
}
of_node_put(np);
np = of_find_matching_node(NULL, rtc_match);
if (!np) {
pr_err("Failed to find RTC DT node\n");
BUG();
}
rtc_base = of_iomap(np, 0);
if (!rtc_base) {
pr_err("Can't map RTC registers");
BUG();
}
/*
* rtc registers are used by read_persistent_clock, keep the rtc clock
* enabled
@ -202,6 +226,8 @@ static void __init tegra_init_timer(void)
else
clk_prepare_enable(clk);
of_node_put(np);
switch (rate) {
case 12000000:
timer_writel(0x000b, TIMERUS_USEC_CFG);
@ -223,13 +249,13 @@ static void __init tegra_init_timer(void)
if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
"timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
printk(KERN_ERR "Failed to register clocksource\n");
pr_err("Failed to register clocksource\n");
BUG();
}
ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq);
if (ret) {
printk(KERN_ERR "Failed to register timer IRQ: %d\n", ret);
pr_err("Failed to register timer IRQ: %d\n", ret);
BUG();
}
@ -241,7 +267,9 @@ static void __init tegra_init_timer(void)
tegra_clockevent.cpumask = cpu_all_mask;
tegra_clockevent.irq = tegra_timer_irq.irq;
clockevents_register_device(&tegra_clockevent);
tegra_twd_init();
#ifdef CONFIG_HAVE_ARM_TWD
twd_local_timer_of_register();
#endif
register_persistent_clock(NULL, tegra_read_persistent_clock);
}

2
arch/arm/mach-ux500/Kconfig
View File

@ -7,8 +7,8 @@ config UX500_SOC_COMMON
select ARM_ERRATA_764369 if SMP
select ARM_GIC
select CACHE_L2X0
select CLKSRC_NOMADIK_MTU
select COMMON_CLK
select HAS_MTU
select PINCTRL
select PINCTRL_NOMADIK
select PL310_ERRATA_753970 if CACHE_PL310

3
arch/arm/mach-ux500/board-mop500-audio.c
View File

@ -8,8 +8,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <plat/ste_dma40.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>

2
arch/arm/mach-ux500/board-mop500-sdi.c
View File

@ -11,9 +11,9 @@
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include <asm/mach-types.h>
#include <plat/ste_dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>

3
arch/arm/mach-ux500/board-mop500.c
View File

@ -36,13 +36,12 @@
#include <linux/leds.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <plat/ste_dma40.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>

3
arch/arm/mach-ux500/cpu-db8500.c
View File

@ -21,16 +21,19 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/regulator/machine.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/random.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/db8500-regs.h>
#include <mach/irqs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"

1
arch/arm/mach-ux500/devices-common.c
View File

@ -14,6 +14,7 @@
#include <linux/platform_data/pinctrl-nomadik.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include "devices-common.h"

4
arch/arm/mach-ux500/devices-db8500.c
View File

@ -12,11 +12,11 @@
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <plat/ste_dma40.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/irqs.h>
#include "ste-dma40-db8500.h"

1
arch/arm/mach-ux500/devices-db8500.h
View File

@ -8,6 +8,7 @@
#ifndef __DEVICES_DB8500_H
#define __DEVICES_DB8500_H
#include <mach/irqs.h>
#include "devices-common.h"
struct ske_keypad_platform_data;

2
arch/arm/mach-ux500/include/mach/irqs.h
View File

@ -46,6 +46,6 @@
#include <mach/irqs-board-mop500.h>
#endif
#define NR_IRQS IRQ_BOARD_END
#define UX500_NR_IRQS IRQ_BOARD_END
#endif /* ASM_ARCH_IRQS_H */

2
arch/arm/mach-ux500/include/mach/msp.h
View File

@ -8,7 +8,7 @@
#ifndef __MSP_H
#define __MSP_H
#include <plat/ste_dma40.h>
#include <linux/platform_data/dma-ste-dma40.h>
enum msp_i2s_id {
MSP_I2S_0 = 0,

5
arch/arm/mach-ux500/timer.c
View File

@ -9,11 +9,10 @@
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
#include <asm/smp_twd.h>
#include <plat/mtu.h>
#include <mach/setup.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@ -96,7 +95,7 @@ dt_fail:
*
*/
nmdk_timer_init(mtu_timer_base);
nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
clksrc_dbx500_prcmu_init(prcmu_timer_base);
ux500_twd_init();
}

6
arch/arm/mach-ux500/usb.c
View File

@ -7,10 +7,10 @@
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
#include <linux/dma-mapping.h>
#include <plat/ste_dma40.h>
#include <mach/hardware.h>
#include <linux/platform_data/usb-musb-ux500.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/hardware.h>
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \

12
arch/arm/mach-vt8500/Kconfig Normal file
View File

@ -0,0 +1,12 @@
config ARCH_VT8500
bool "VIA/WonderMedia 85xx" if ARCH_MULTI_V5
default ARCH_VT8500_SINGLE
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.

3
arch/arm/mach-vt8500/common.h
View File

@ -25,4 +25,7 @@ int __init vt8500_irq_init(struct device_node *node,
/* defined in drivers/clk/clk-vt8500.c */
void __init vtwm_clk_init(void __iomem *pmc_base);
/* defined in irq.c */
asmlinkage void vt8500_handle_irq(struct pt_regs *regs);
#endif

26
arch/arm/mach-vt8500/include/mach/entry-macro.S
View File

@ -1,26 +0,0 @@
/*
* arch/arm/mach-vt8500/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for VIA VT8500
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro get_irqnr_preamble, base, tmp
@ physical 0xd8140000 is virtual 0xf8140000
mov \base, #0xf8000000
orr \base, \base, #0x00140000
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base]
cmp \irqnr, #63 @ may be false positive, check interrupt status
bne 1001f
ldr \irqstat, [\base, #0x84]
ands \irqstat, #0x80000000
moveq \irqnr, #0
1001:
.endm

22
arch/arm/mach-vt8500/include/mach/irqs.h
View File

@ -1,22 +0,0 @@
/*
* arch/arm/mach-vt8500/include/mach/irqs.h
*
* Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* This value is just to make the core happy, never used otherwise */
#define NR_IRQS 128

108
arch/arm/mach-vt8500/irq.c
View File

@ -36,7 +36,7 @@
#include <linux/of_address.h>
#include <asm/irq.h>
#include <asm/exception.h>
#define VT8500_ICPC_IRQ 0x20
#define VT8500_ICPC_FIQ 0x24
@ -66,30 +66,34 @@
#define VT8500_EDGE ( VT8500_TRIGGER_RISING \
| VT8500_TRIGGER_FALLING)
static int irq_cnt;
/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */
#define VT8500_INTC_MAX 2
struct vt8500_irq_priv {
void __iomem *base;
struct vt8500_irq_data {
void __iomem *base; /* IO Memory base address */
struct irq_domain *domain; /* Domain for this controller */
};
/* Global variable for accessing io-mem addresses */
static struct vt8500_irq_data intc[VT8500_INTC_MAX];
static u32 active_cnt = 0;
static void vt8500_irq_mask(struct irq_data *d)
{
struct vt8500_irq_priv *priv =
(struct vt8500_irq_priv *)(d->domain->host_data);
struct vt8500_irq_data *priv = d->domain->host_data;
void __iomem *base = priv->base;
u8 edge;
void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4);
u8 edge, dctr;
u32 status;
edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
if (edge) {
void __iomem *stat_reg = base + VT8500_ICIS
+ (d->hwirq < 32 ? 0 : 4);
unsigned status = readl(stat_reg);
status = readl(stat_reg);
status |= (1 << (d->hwirq & 0x1f));
writel(status, stat_reg);
} else {
u8 dctr = readb(base + VT8500_ICDC + d->hwirq);
dctr = readb(base + VT8500_ICDC + d->hwirq);
dctr &= ~VT8500_INT_ENABLE;
writeb(dctr, base + VT8500_ICDC + d->hwirq);
}
@ -97,8 +101,7 @@ static void vt8500_irq_mask(struct irq_data *d)
static void vt8500_irq_unmask(struct irq_data *d)
{
struct vt8500_irq_priv *priv =
(struct vt8500_irq_priv *)(d->domain->host_data);
struct vt8500_irq_data *priv = d->domain->host_data;
void __iomem *base = priv->base;
u8 dctr;
@ -109,8 +112,7 @@ static void vt8500_irq_unmask(struct irq_data *d)
static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
struct vt8500_irq_priv *priv =
(struct vt8500_irq_priv *)(d->domain->host_data);
struct vt8500_irq_data *priv = d->domain->host_data;
void __iomem *base = priv->base;
u8 dctr;
@ -148,17 +150,15 @@ static struct irq_chip vt8500_irq_chip = {
static void __init vt8500_init_irq_hw(void __iomem *base)
{
unsigned int i;
u32 i;
/* Enable rotating priority for IRQ */
writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ);
writel(0x00, base + VT8500_ICPC_FIQ);
for (i = 0; i < 64; i++) {
/* Disable all interrupts and route them to IRQ */
writeb(VT8500_INT_DISABLE | ICDC_IRQ,
base + VT8500_ICDC + i);
}
/* Disable all interrupts and route them to IRQ */
for (i = 0; i < 64; i++)
writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i);
}
static int vt8500_irq_map(struct irq_domain *h, unsigned int virq,
@ -175,33 +175,67 @@ static struct irq_domain_ops vt8500_irq_domain_ops = {
.xlate = irq_domain_xlate_onecell,
};
asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs)
{
u32 stat, i;
int irqnr, virq;
void __iomem *base;
/* Loop through each active controller */
for (i=0; i<active_cnt; i++) {
base = intc[i].base;
irqnr = readl_relaxed(base) & 0x3F;
/*
Highest Priority register default = 63, so check that this
is a real interrupt by checking the status register
*/
if (irqnr == 63) {
stat = readl_relaxed(base + VT8500_ICIS + 4);
if (!(stat & BIT(31)))
continue;
}
virq = irq_find_mapping(intc[i].domain, irqnr);
handle_IRQ(virq, regs);
}
}
int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
{
struct irq_domain *vt8500_irq_domain;
struct vt8500_irq_priv *priv;
int irq, i;
struct device_node *np = node;
priv = kzalloc(sizeof(struct vt8500_irq_priv), GFP_KERNEL);
priv->base = of_iomap(np, 0);
if (active_cnt == VT8500_INTC_MAX) {
pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n",
__func__);
goto out;
}
vt8500_irq_domain = irq_domain_add_legacy(node, 64, irq_cnt, 0,
&vt8500_irq_domain_ops, priv);
if (!vt8500_irq_domain)
pr_err("%s: Unable to add wmt irq domain!\n", __func__);
intc[active_cnt].base = of_iomap(np, 0);
intc[active_cnt].domain = irq_domain_add_linear(node, 64,
&vt8500_irq_domain_ops, &intc[active_cnt]);
irq_set_default_host(vt8500_irq_domain);
if (!intc[active_cnt].base) {
pr_err("%s: Unable to map IO memory\n", __func__);
goto out;
}
vt8500_init_irq_hw(priv->base);
if (!intc[active_cnt].domain) {
pr_err("%s: Unable to add irq domain!\n", __func__);
goto out;
}
pr_info("Added IRQ Controller @ %x [virq_base = %d]\n",
(u32)(priv->base), irq_cnt);
vt8500_init_irq_hw(intc[active_cnt].base);
pr_info("vt8500-irq: Added interrupt controller\n");
active_cnt++;
/* check if this is a slaved controller */
if (of_irq_count(np) != 0) {
/* check that we have the correct number of interrupts */
if (of_irq_count(np) != 8) {
pr_err("%s: Incorrect IRQ map for slave controller\n",
pr_err("%s: Incorrect IRQ map for slaved controller\n",
__func__);
return -EINVAL;
}
@ -213,9 +247,7 @@ int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
pr_info("vt8500-irq: Enabled slave->parent interrupts\n");
}
irq_cnt += 64;
out:
return 0;
}

1
arch/arm/mach-vt8500/vt8500.c
View File

@ -192,5 +192,6 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
.timer = &vt8500_timer,
.init_machine = vt8500_init,
.restart = vt8500_restart,
.handle_irq = vt8500_handle_irq,
MACHINE_END

13
arch/arm/mach-zynq/Kconfig Normal file
View File

@ -0,0 +1,13 @@
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select ICST
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
select SPARSE_IRQ
help
Support for Xilinx Zynq ARM Cortex A9 Platform

38
arch/arm/mach-zynq/common.c
View File

@ -30,10 +30,10 @@
#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/zynq_soc.h>
#include "common.h"
static struct of_device_id zynq_of_bus_ids[] __initdata = {
@ -68,32 +68,15 @@ static void __init xilinx_irq_init(void)
of_irq_init(irq_match);
}
/* The minimum devices needed to be mapped before the VM system is up and
* running include the GIC, UART and Timer Counter.
*/
static struct map_desc io_desc[] __initdata = {
{
.virtual = TTC0_VIRT,
.pfn = __phys_to_pfn(TTC0_PHYS),
.length = TTC0_SIZE,
.type = MT_DEVICE,
}, {
.virtual = SCU_PERIPH_VIRT,
.pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
.length = SCU_PERIPH_SIZE,
.type = MT_DEVICE,
},
#ifdef CONFIG_DEBUG_LL
{
.virtual = LL_UART_VADDR,
.pfn = __phys_to_pfn(LL_UART_PADDR),
.length = UART_SIZE,
.type = MT_DEVICE,
},
#endif
#define SCU_PERIPH_PHYS 0xF8F00000
#define SCU_PERIPH_SIZE SZ_8K
#define SCU_PERIPH_VIRT (VMALLOC_END - SCU_PERIPH_SIZE)
static struct map_desc scu_desc __initdata = {
.virtual = SCU_PERIPH_VIRT,
.pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
.length = SCU_PERIPH_SIZE,
.type = MT_DEVICE,
};
static void __init xilinx_zynq_timer_init(void)
@ -122,7 +105,8 @@ static struct sys_timer xttcpss_sys_timer = {
*/
static void __init xilinx_map_io(void)
{
iotable_init(io_desc, ARRAY_SIZE(io_desc));
debug_ll_io_init();
iotable_init(&scu_desc, 1);
}
static const char *xilinx_dt_match[] = {

18
arch/arm/mach-zynq/include/mach/hardware.h
View File

@ -1,18 +0,0 @@
/* arch/arm/mach-zynq/include/mach/hardware.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_HARDWARE_H__
#define __MACH_HARDWARE_H__
#endif

21
arch/arm/mach-zynq/include/mach/irqs.h
View File

@ -1,21 +0,0 @@
/* arch/arm/mach-zynq/include/mach/irqs.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
#define ARCH_NR_GPIOS 118
#define NR_IRQS (128 + ARCH_NR_GPIOS)
#endif

23
arch/arm/mach-zynq/include/mach/timex.h
View File

@ -1,23 +0,0 @@
/* arch/arm/mach-zynq/include/mach/timex.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_TIMEX_H__
#define __MACH_TIMEX_H__
/* the following is needed for the system to build but will be removed
in the future, the value is not important but won't hurt
*/
#define CLOCK_TICK_RATE (100 * HZ)
#endif

25
arch/arm/mach-zynq/include/mach/uart.h
View File

@ -1,25 +0,0 @@
/* arch/arm/mach-zynq/include/mach/uart.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_UART_H__
#define __MACH_UART_H__
#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */
#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */
#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */
#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */
#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
#endif

51
arch/arm/mach-zynq/include/mach/uncompress.h
View File

@ -1,51 +0,0 @@
/* arch/arm/mach-zynq/include/mach/uncompress.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_UNCOMPRESS_H__
#define __MACH_UNCOMPRESS_H__
#include <linux/io.h>
#include <asm/processor.h>
#include <mach/zynq_soc.h>
#include <mach/uart.h>
void arch_decomp_setup(void)
{
}
static inline void flush(void)
{
/*
* Wait while the FIFO is not empty
*/
while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
UART_SR_TXEMPTY))
cpu_relax();
}
#define arch_decomp_wdog()
static void putc(char ch)
{
/*
* Wait for room in the FIFO, then write the char into the FIFO
*/
while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
UART_SR_TXFULL)
cpu_relax();
__raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET));
}
#endif

53
arch/arm/mach-zynq/include/mach/zynq_soc.h
View File

@ -1,53 +0,0 @@
/* arch/arm/mach-zynq/include/mach/zynq_soc.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_XILINX_SOC_H__
#define __MACH_XILINX_SOC_H__
#include <asm/pgtable.h>
#define PERIPHERAL_CLOCK_RATE 2500000
/* Static peripheral mappings are mapped at the top of the vmalloc region. The
* early uart mapping causes intermediate problems/failure at certain
* addresses, including the very top of the vmalloc region. Map it at an
* address that is known to work.
*/
#define UART0_PHYS 0xE0000000
#define UART1_PHYS 0xE0001000
#define UART_SIZE SZ_4K
#define UART_VIRT 0xF0001000
#define TTC0_PHYS 0xF8001000
#define TTC0_SIZE SZ_4K
#define TTC0_VIRT (VMALLOC_END - TTC0_SIZE)
#define SCU_PERIPH_PHYS 0xF8F00000
#define SCU_PERIPH_SIZE SZ_8K
#define SCU_PERIPH_VIRT (TTC0_VIRT - SCU_PERIPH_SIZE)
#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
# define LL_UART_PADDR UART1_PHYS
#else
# define LL_UART_PADDR UART0_PHYS
#endif
#define LL_UART_VADDR UART_VIRT
/* The following are intended for the devices that are mapped early */
#define TTC0_BASE IOMEM(TTC0_VIRT)
#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)
#endif

1
arch/arm/mach-zynq/timer.c
View File

@ -29,7 +29,6 @@
#include <linux/slab.h>
#include <linux/clk-provider.h>
#include <mach/zynq_soc.h>
#include "common.h"
/*

29
arch/arm/plat-nomadik/Kconfig
View File

@ -1,29 +0,0 @@
# We keep common IP's here for Nomadik and other similar
# familiy of processors from ST-Ericsson. At the moment we have
# just MTU, others to follow soon.
config PLAT_NOMADIK
bool
depends on ARCH_NOMADIK || ARCH_U8500
default y
select CLKSRC_MMIO
help
Common platform code for Nomadik and other ST-Ericsson
platforms.
if PLAT_NOMADIK
config HAS_MTU
bool
help
Support for Multi Timer Unit. MTU provides access
to multiple interrupt generating programmable
32-bit free running decrementing counters.
config NOMADIK_MTU_SCHED_CLOCK
bool
depends on HAS_MTU
help
Use the Multi Timer Unit as the sched_clock.
endif

5
arch/arm/plat-nomadik/Makefile
View File

@ -1,5 +0,0 @@
# arch/arm/plat-nomadik/Makefile
# Copyright 2009 ST-Ericsson
# Licensed under GPLv2
obj-$(CONFIG_HAS_MTU) += timer.o

2
drivers/char/hw_random/Kconfig
View File

@ -216,7 +216,7 @@ config HW_RANDOM_MXC_RNGA
config HW_RANDOM_NOMADIK
tristate "ST-Ericsson Nomadik Random Number Generator support"
depends on HW_RANDOM && PLAT_NOMADIK
depends on HW_RANDOM && ARCH_NOMADIK
---help---
This driver provides kernel-side support for the Random Number
Generator hardware found on ST-Ericsson SoCs (8815 and 8500).

11
drivers/clk/ux500/u8500_clk.c
View File

@ -12,7 +12,7 @@
#include <linux/clk-provider.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/clk-ux500.h>
#include <mach/db8500-regs.h>
#include "clk.h"
void u8500_clk_init(void)
@ -160,12 +160,6 @@ void u8500_clk_init(void)
clk = clk_reg_prcmu_gate("uiccclk", NULL, PRCMU_UICCCLK, CLK_IS_ROOT);
clk_register_clkdev(clk, NULL, "uicc");
/*
* FIXME: The MTU clocks might need some kind of "parent muxed join"
* and these have no K-clocks. For now, we ignore the missing
* connection to the corresponding P-clocks, p6_mtu0_clk and
* p6_mtu1_clk. Instead timclk is used which is the valid parent.
*/
clk = clk_reg_prcmu_gate("timclk", NULL, PRCMU_TIMCLK, CLK_IS_ROOT);
clk_register_clkdev(clk, NULL, "mtu0");
clk_register_clkdev(clk, NULL, "mtu1");
@ -405,8 +399,11 @@ void u8500_clk_init(void)
clk = clk_reg_prcc_pclk("p6_pclk6", "per6clk", U8500_CLKRST6_BASE,
BIT(6), 0);
clk_register_clkdev(clk, "apb_pclk", "mtu0");
clk = clk_reg_prcc_pclk("p6_pclk7", "per6clk", U8500_CLKRST6_BASE,
BIT(7), 0);
clk_register_clkdev(clk, "apb_pclk", "mtu1");
/* PRCC K-clocks
*

17
drivers/clocksource/Kconfig
View File

@ -25,6 +25,21 @@ config ARMADA_370_XP_TIMER
config SUNXI_TIMER
bool
config CLKSRC_NOMADIK_MTU
bool
depends on (ARCH_NOMADIK || ARCH_U8500)
select CLKSRC_MMIO
help
Support for Multi Timer Unit. MTU provides access
to multiple interrupt generating programmable
32-bit free running decrementing counters.
config CLKSRC_NOMADIK_MTU_SCHED_CLOCK
bool
depends on CLKSRC_NOMADIK_MTU
help
Use the Multi Timer Unit as the sched_clock.
config CLKSRC_DBX500_PRCMU
bool "Clocksource PRCMU Timer"
depends on UX500_SOC_DB8500
@ -34,7 +49,7 @@ config CLKSRC_DBX500_PRCMU
config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
bool "Clocksource PRCMU Timer sched_clock"
depends on (CLKSRC_DBX500_PRCMU && !NOMADIK_MTU_SCHED_CLOCK)
depends on (CLKSRC_DBX500_PRCMU && !CLKSRC_NOMADIK_MTU_SCHED_CLOCK)
default y
help
Use the always on PRCMU Timer as sched_clock

1
drivers/clocksource/Makefile
View File

@ -11,6 +11,7 @@ obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o

19
arch/arm/plat-nomadik/timer.c → drivers/clocksource/nomadik-mtu.c
View File

@ -1,6 +1,4 @@
/*
* linux/arch/arm/plat-nomadik/timer.c
*
* Copyright (C) 2008 STMicroelectronics
* Copyright (C) 2010 Alessandro Rubini
* Copyright (C) 2010 Linus Walleij for ST-Ericsson
@ -14,9 +12,11 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/err.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
@ -174,12 +174,18 @@ void nmdk_clksrc_reset(void)
mtu_base + MTU_CR(0));
}
void __init nmdk_timer_init(void __iomem *base)
void __init nmdk_timer_init(void __iomem *base, int irq)
{
unsigned long rate;
struct clk *clk0;
struct clk *clk0, *pclk0;
mtu_base = base;
pclk0 = clk_get_sys("mtu0", "apb_pclk");
BUG_ON(IS_ERR(pclk0));
BUG_ON(clk_prepare(pclk0) < 0);
BUG_ON(clk_enable(pclk0) < 0);
clk0 = clk_get_sys("mtu0", NULL);
BUG_ON(IS_ERR(clk0));
BUG_ON(clk_prepare(clk0) < 0);
@ -201,7 +207,8 @@ void __init nmdk_timer_init(void __iomem *base)
clk_prescale = MTU_CRn_PRESCALE_1;
}
nmdk_cycle = (rate + HZ/2) / HZ;
/* Cycles for periodic mode */
nmdk_cycle = DIV_ROUND_CLOSEST(rate, HZ);
/* Timer 0 is the free running clocksource */
@ -217,7 +224,7 @@ void __init nmdk_timer_init(void __iomem *base)
#endif
/* Timer 1 is used for events, register irq and clockevents */
setup_irq(IRQ_MTU0, &nmdk_timer_irq);
setup_irq(irq, &nmdk_timer_irq);
nmdk_clkevt.cpumask = cpumask_of(0);
clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
}

3
drivers/crypto/ux500/cryp/cryp_core.c
View File

@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/semaphore.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include <crypto/aes.h>
#include <crypto/algapi.h>
@ -30,8 +31,6 @@
#include <crypto/des.h>
#include <crypto/scatterwalk.h>
#include <plat/ste_dma40.h>
#include <linux/platform_data/crypto-ux500.h>
#include <mach/hardware.h>

3
drivers/dma/ste_dma40.c
View File

@ -19,8 +19,7 @@
#include <linux/err.h>
#include <linux/amba/bus.h>
#include <linux/regulator/consumer.h>
#include <plat/ste_dma40.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include "dmaengine.h"
#include "ste_dma40_ll.h"

2
drivers/dma/ste_dma40_ll.c
View File

@ -6,7 +6,7 @@
*/
#include <linux/kernel.h>
#include <plat/ste_dma40.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include "ste_dma40_ll.h"

2
drivers/input/keyboard/Kconfig
View File

@ -409,7 +409,7 @@ config KEYBOARD_NEWTON
config KEYBOARD_NOMADIK
tristate "ST-Ericsson Nomadik SKE keyboard"
depends on PLAT_NOMADIK
depends on (ARCH_NOMADIK || ARCH_U8500)
select INPUT_MATRIXKMAP
help
Say Y here if you want to use a keypad provided on the SKE controller

13
drivers/mfd/ab8500-core.c
View File

@ -565,15 +565,10 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np)
else
num_irqs = AB8500_NR_IRQS;
if (ab8500->irq_base) {
ab8500->domain = irq_domain_add_legacy(
NULL, num_irqs, ab8500->irq_base,
0, &ab8500_irq_ops, ab8500);
}
else {
ab8500->domain = irq_domain_add_linear(
np, num_irqs, &ab8500_irq_ops, ab8500);
}
/* If ->irq_base is zero this will give a linear mapping */
ab8500->domain = irq_domain_add_simple(NULL,
num_irqs, ab8500->irq_base,
&ab8500_irq_ops, ab8500);
if (!ab8500->domain) {
dev_err(ab8500->dev, "Failed to create irqdomain\n");

12
drivers/mfd/db8500-prcmu.c
View File

@ -2743,9 +2743,15 @@ static struct irq_domain_ops db8500_irq_ops = {
static int db8500_irq_init(struct device_node *np)
{
db8500_irq_domain = irq_domain_add_legacy(
np, NUM_PRCMU_WAKEUPS, IRQ_PRCMU_BASE,
0, &db8500_irq_ops, NULL);
int irq_base = -1;
/* In the device tree case, just take some IRQs */
if (!np)
irq_base = IRQ_PRCMU_BASE;
db8500_irq_domain = irq_domain_add_simple(
np, NUM_PRCMU_WAKEUPS, irq_base,
&db8500_irq_ops, NULL);
if (!db8500_irq_domain) {
pr_err("Failed to create irqdomain\n");

2
drivers/mtd/nand/Kconfig
View File

@ -546,7 +546,7 @@ config MTD_NAND_JZ4740
config MTD_NAND_FSMC
tristate "Support for NAND on ST Micros FSMC"
depends on PLAT_SPEAR || PLAT_NOMADIK || MACH_U300
depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
help
Enables support for NAND Flash chips on the ST Microelectronics
Flexible Static Memory Controller (FSMC)

3
drivers/pinctrl/pinctrl-nomadik.c
View File

@ -31,9 +31,8 @@
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach/irq.h>
#include <mach/irqs.h>
#include "pinctrl-nomadik.h"
/*

2
arch/arm/plat-nomadik/include/plat/mtu.h → include/linux/platform_data/clocksource-nomadik-mtu.h
View File

@ -1,7 +1,7 @@
#ifndef __PLAT_MTU_H
#define __PLAT_MTU_H
void nmdk_timer_init(void __iomem *base);
void nmdk_timer_init(void __iomem *base, int irq);
void nmdk_clkevt_reset(void);
void nmdk_clksrc_reset(void);

2
include/linux/platform_data/crypto-ux500.h
View File

@ -7,7 +7,7 @@
#ifndef _CRYPTO_UX500_H
#define _CRYPTO_UX500_H
#include <linux/dmaengine.h>
#include <plat/ste_dma40.h>
#include <linux/platform_data/dma-ste-dma40.h>
struct hash_platform_data {
void *mem_to_engine;

0
arch/arm/plat-nomadik/include/plat/ste_dma40.h → include/linux/platform_data/dma-ste-dma40.h
View File

3
sound/soc/ux500/ux500_pcm.c
View File

@ -18,8 +18,7 @@
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/slab.h>
#include <plat/ste_dma40.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>