forked from Minki/linux
ARM: dts: at91: sama5d2_xplained: Update the pmic node
Due to introducing the new driver - ACT8945A MFD drive, change the pmic device node to align with the ACT8945A regulator and charger drivers. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit is contained in:
parent
fcac40c94d
commit
b8bca7eaef
@ -158,56 +158,64 @@
|
||||
i2c-sda-hold-time-ns = <350>;
|
||||
status = "okay";
|
||||
|
||||
pmic: act8865@5b {
|
||||
compatible = "active-semi,act8865";
|
||||
pmic@5b {
|
||||
compatible = "active-semi,act8945a";
|
||||
reg = <0x5b>;
|
||||
active-semi,vsel-high;
|
||||
active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
|
||||
active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
|
||||
active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
|
||||
active-semi,input-voltage-threshold-microvolt = <6600>;
|
||||
active-semi,precondition-timeout = <40>;
|
||||
active-semi,total-timeout = <3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
|
||||
status = "okay";
|
||||
|
||||
regulators {
|
||||
vdd_1v35_reg: DCDC_REG1 {
|
||||
vdd_1v35_reg: REG_DCDC1 {
|
||||
regulator-name = "VDD_1V35";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_1v2_reg: DCDC_REG2 {
|
||||
vdd_1v2_reg: REG_DCDC2 {
|
||||
regulator-name = "VDD_1V2";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_3v3_reg: DCDC_REG3 {
|
||||
vdd_3v3_reg: REG_DCDC3 {
|
||||
regulator-name = "VDD_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_fuse_reg: LDO_REG1 {
|
||||
vdd_fuse_reg: REG_LDO1 {
|
||||
regulator-name = "VDD_FUSE";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_3v3_lp_reg: LDO_REG2 {
|
||||
vdd_3v3_lp_reg: REG_LDO2 {
|
||||
regulator-name = "VDD_3V3_LP";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_led_reg: LDO_REG3 {
|
||||
vdd_led_reg: REG_LDO3 {
|
||||
regulator-name = "VDD_LED";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_sdhc_1v8_reg: LDO_REG4 {
|
||||
vdd_sdhc_1v8_reg: REG_LDO4 {
|
||||
regulator-name = "VDD_SDHC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
@ -309,6 +317,21 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_charger_chglev: charger_chglev {
|
||||
pinmux = <PIN_PA12__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_charger_irq: charger_irq {
|
||||
pinmux = <PIN_PB13__GPIO>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinctrl_charger_lbo: charger_lbo {
|
||||
pinmux = <PIN_PC8__GPIO>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pinctrl_flx0_default: flx0_default {
|
||||
pinmux = <PIN_PB28__FLEXCOM0_IO0>,
|
||||
<PIN_PB29__FLEXCOM0_IO1>;
|
||||
|
Loading…
Reference in New Issue
Block a user