forked from Minki/linux
regulator: Add bindings for Richtek RT5190A PMIC
Add bindings for Richtek RT5190A PMIC. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/1646812903-32496-2-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
ChiYuan Huang
Mark Brown
parent
2594703044
commit
b77e70f6b8
@ -0,0 +1,141 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Richtek RT5190A PMIC Regulator
|
||||
|
||||
maintainers:
|
||||
- ChiYuan Huang <cy_huang@richtek.com>
|
||||
|
||||
description: |
|
||||
The RT5190A integrates 1 channel buck controller, 3 channels high efficiency
|
||||
synchronous buck converters, 1 LDO, I2C control interface and peripherial
|
||||
logical control.
|
||||
|
||||
It also supports mute AC OFF depop sound and quick setting storage while
|
||||
input power is removed.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- richtek,rt5190a
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
vin2-supply:
|
||||
description: phandle to buck2 input voltage.
|
||||
|
||||
vin3-supply:
|
||||
description: phandle to buck3 input voltage.
|
||||
|
||||
vin4-supply:
|
||||
description: phandle to buck4 input voltage.
|
||||
|
||||
vinldo-supply:
|
||||
description: phandle to ldo input voltage
|
||||
|
||||
richtek,mute-enable:
|
||||
description: |
|
||||
The mute function uses 'mutein', 'muteout', and 'vdet' pins as the control
|
||||
signal. When enabled, The normal behavior is to bypass the 'mutein' signal
|
||||
'muteout'. But if the power source removal is detected from 'vdet',
|
||||
whatever the 'mutein' signal is, it will pull down the 'muteout' to force
|
||||
speakers mute. this function is commonly used to prevent the speaker pop
|
||||
noise during AC power turned off in the modern TV system design.
|
||||
type: boolean
|
||||
|
||||
regulators:
|
||||
type: object
|
||||
|
||||
patternProperties:
|
||||
"^buck[1-4]$|^ldo$":
|
||||
type: object
|
||||
$ref: regulator.yaml#
|
||||
description: |
|
||||
regulator description for buck1 and buck4.
|
||||
|
||||
properties:
|
||||
regulator-allowed-modes:
|
||||
description: |
|
||||
buck operating mode, only buck1/4 support mode operating.
|
||||
0: auto mode
|
||||
1: force pwm mode
|
||||
items:
|
||||
enum: [0, 1]
|
||||
|
||||
richtek,latchup-enable:
|
||||
type: boolean
|
||||
description: |
|
||||
If specified, undervolt protection mode changes from the default
|
||||
hiccup to latchup.
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- regulators
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmic@64 {
|
||||
compatible = "richtek,rt5190a";
|
||||
reg = <0x64>;
|
||||
interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
|
||||
vin2-supply = <&rt5190_buck1>;
|
||||
vin3-supply = <&rt5190_buck1>;
|
||||
vin4-supply = <&rt5190_buck1>;
|
||||
|
||||
regulators {
|
||||
rt5190_buck1: buck1 {
|
||||
regulator-name = "rt5190a-buck1";
|
||||
regulator-min-microvolt = <5090000>;
|
||||
regulator-max-microvolt = <5090000>;
|
||||
regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
buck2 {
|
||||
regulator-name = "rt5190a-buck2";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
buck3 {
|
||||
regulator-name = "rt5190a-buck3";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
buck4 {
|
||||
regulator-name = "rt5190a-buck4";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
ldo {
|
||||
regulator-name = "rt5190a-ldo";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
15
include/dt-bindings/regulator/richtek,rt5190a-regulator.h
Normal file
15
include/dt-bindings/regulator/richtek,rt5190a-regulator.h
Normal file
@ -0,0 +1,15 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
|
||||
#ifndef __DT_BINDINGS_RICHTEK_RT5190A_REGULATOR_H__
|
||||
#define __DT_BINDINGS_RICHTEK_RT5190A_REGULATOR_H__
|
||||
|
||||
/*
|
||||
* BUCK/LDO mode constants which may be used in devicetree properties
|
||||
* (eg. regulator-allowed-modes).
|
||||
* See the manufacturer's datasheet for more information on these modes.
|
||||
*/
|
||||
|
||||
#define RT5190A_OPMODE_AUTO 0
|
||||
#define RT5190A_OPMODE_FPWM 1
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user