forked from Minki/linux
USB: pl2303: another product ID
Device like this http://aldiga.com/english/A-100-USB-EDGE10.htm contains Prolific 2303 chip. Actually their site a bit outdated - I have AlDiga AL-11U GSM/GPRS/EDGE modem and it works with pl2303 module after adding corresponding product ID. By default modem uses baud rate 460800. GSM chipset - SIMCom SIM600, quad band 850/900/1800/1900 MHz Device info: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=067b ProdID=0611 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303 E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Max Arnold <lwarxx@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
parent
392e1d9817
commit
b483b6aaa5
@ -55,6 +55,7 @@ static struct usb_device_id id_table [] = {
|
||||
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
|
||||
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
|
||||
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
|
||||
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
|
||||
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
|
||||
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
|
||||
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
|
||||
|
@ -13,6 +13,7 @@
|
||||
#define PL2303_PRODUCT_ID_DCU11 0x1234
|
||||
#define PL2303_PRODUCT_ID_PHAROS 0xaaa0
|
||||
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
|
||||
#define PL2303_PRODUCT_ID_ALDIGA 0x0611
|
||||
|
||||
#define ATEN_VENDOR_ID 0x0557
|
||||
#define ATEN_VENDOR_ID2 0x0547
|
||||
|
Loading…
Reference in New Issue
Block a user