leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

i.MX arm64 device tree changes for 5.1:

Browse Source 
- Add initial i.MX8QXP SoC and MEK board support.
  - Various device additions to i.MX8MQ SoC and EVK board support:
    RTC, QuadSPI, PMU, ECSPI, PWM, GPC power domain, USB etc.
  - Use generic node name for m25p80 flash on layerscape devices.
  - Add num-viewport property for layerscape PCIe devices, and
    incr-burst-type-adjustment for USB3 devices.
  - Add LS1012AX based Oxalis board support.
  - Add fsl-mc, FlexSPI device and dma-ranges property for LX2160A SoC.
  - Add SMMU device and missing dma-coherent property in fsl-mc for
    LS1088 SoC.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcYp9oAAoJEFBXWFqHsHzOtIMIALOPv2znXL5iMfC3hYdcf8eJ
 6+1iXfMn2735bldUZn+mMVZ4/sCM1gyIGzOMPI2E26fzcGgd5Lw0sJ+Tqo7SuvEa
 NRhI0T+xeNAK3wTxSQ5kSot+8Ne85UwyjiXyN+pL1ifsHQtZ3h3J3KKIc+34X8Sx
 AkIofB2R+/Kv3nJfXOa6pep6sw+FR9hVlBtxj7OAU3eMBOAcO4RJkyDcsqt02fbo
 GIefiDDIaOOPMCBNdE+Sh4o7qifVMUcGlom4umm3oieXKKA31i0AwjeDOQidNfrW
 Dl10EO+bjxgHrcuXDq39Z8Rsl4iRXHyNcOWs+sqKG9u/6nKWukr590/fPJ9OUPA=
 =eglh
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt64-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree changes for 5.1:
 - Add initial i.MX8QXP SoC and MEK board support.
 - Various device additions to i.MX8MQ SoC and EVK board support:
   RTC, QuadSPI, PMU, ECSPI, PWM, GPC power domain, USB etc.
 - Use generic node name for m25p80 flash on layerscape devices.
 - Add num-viewport property for layerscape PCIe devices, and
   incr-burst-type-adjustment for USB3 devices.
 - Add LS1012AX based Oxalis board support.
 - Add fsl-mc, FlexSPI device and dma-ranges property for LX2160A SoC.
 - Add SMMU device and missing dma-coherent property in fsl-mc for
   LS1088 SoC.

* tag 'imx-dt64-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (30 commits)
  arm64: dts: imx8mq: specify dma-ranges
  arm64: dts: imx8mq: Add ARM PMU node
  arm64: dts: imx8mq: Add RTC support
  arm64: dts: imx8mq-evk: Enable the QuadSPI controller
  arm64: dts: imx8mq: Add QuadSPI controller
  arm64: dts: imx8mq: Add ECSPI support
  arm64: dts: imx8mq-evk: Add fsl,magic-packet property
  arm64: dts: imx8mq-evk: add missing MDIO / PHY nodes
  arm64: dts: imx8mq-evk: enable USB nodes for USB3 host
  arm64: dts: imx8mq: add USB nodes
  arm64: dts: imx8mq: properly describe IRQ hierarchy
  arm64: dts: lx2160a: update fspi node
  arm64: dts: freescale: Add devicetree for Oxalis
  arm64: dts: lx2160a: add FlexSPI node property
  arm64: dts: imx8qxp: Fix MU4_INT number
  arm64: dts: imx8mq: add GPC power domains
  arm64: dts: imx8mq: Add pwm device nodes
  arm64: dts: imx: add i.MX8QXP system controller RTC support
  arm64: dts: imx: add imx8qxp mek support
  arm64: dts: imx: add imx8qxp support
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2019-02-15 16:10:09 +01:00
commit b217a721e9
16 changed files with 1301 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm64/boot/dts/freescale/Makefile
View File

@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
@ -20,3 +21,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb

96
arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts Normal file
View File

@ -0,0 +1,96 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Oxalis
*
* Copyright (c) 2019 Manivannan Sadhasivam
*
*/
/dts-v1/;
#include "fsl-ls1012a.dtsi"
/ {
model = "Oxalis";
compatible = "ebs-systart,oxalis", "fsl,ls1012a";
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack",
"Speaker", "Speaker Ext",
"Line", "Line In Jack";
simple-audio-card,routing =
"MIC_IN", "Microphone Jack",
"Microphone Jack", "Mic Bias",
"LINE_IN", "Line In Jack",
"Headphone Jack", "HP_OUT",
"Speaker Ext", "LINE_OUT";
simple-audio-card,cpu {
sound-dai = <&sai2>;
frame-master;
bitclock-master;
};
simple-audio-card,codec {
sound-dai = <&codec>;
frame-master;
bitclock-master;
system-clock-frequency = <25000000>;
};
};
};
&duart0 {
status = "okay";
};
&duart1 {
status = "okay";
};
&esdhc1 {
status = "okay";
};
&i2c0 {
status = "okay";
codec: audio-codec@a {
#sound-dai-cells = <0>;
compatible = "fsl,sgtl5000";
reg = <0xa>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_1p8v>;
clocks = <&sys_mclk>;
};
};
&i2c1 {
status = "okay";
};
&sai2 {
status = "okay";
};
&sata {
status = "okay";
};

2
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
View File

@ -446,6 +446,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
@ -486,6 +487,7 @@
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
num-viewport = <2>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */

2
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
View File

@ -137,7 +137,7 @@
&qspi {
status = "okay";
qflash0: s25fl128s@0 {
qflash0: flash@0 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;

6
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
View File

@ -611,6 +611,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3000000 {
@ -620,6 +621,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb3@3100000 {
@ -629,6 +631,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
@ -675,6 +678,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <4>;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@ -701,6 +705,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <2>;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@ -727,6 +732,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <2>;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */

2
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
View File

@ -165,7 +165,7 @@
&qspi {
status = "okay";
qflash0: s25fl128s@0 {
qflash0: flash@0 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;

4
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
View File

@ -101,7 +101,7 @@
&qspi {
status = "okay";
qflash0: s25fs512s@0 {
qflash0: flash@0 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;
@ -111,7 +111,7 @@
reg = <0>;
};
qflash1: s25fs512s@1 {
qflash1: flash@1 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;

11
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
View File

@ -202,6 +202,7 @@
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
qspi: spi@1550000 {
@ -424,6 +425,7 @@
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
status = "disabled";
};
duart1: serial@21c0600 {
@ -431,6 +433,7 @@
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
status = "disabled";
};
duart2: serial@21d0500 {
@ -438,6 +441,7 @@
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
status = "disabled";
};
duart3: serial@21d0600 {
@ -445,6 +449,7 @@
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
status = "disabled";
};
gpio0: gpio@2300000 {
@ -572,6 +577,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb@3000000 {
@ -581,6 +587,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb2: usb@3100000 {
@ -590,6 +597,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
@ -644,6 +652,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <4>;
num-viewport = <8>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@ -670,6 +679,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <2>;
num-viewport = <8>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@ -696,6 +706,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <2>;
num-viewport = <8>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */

97
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
View File

@ -377,6 +377,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
};
@ -452,6 +453,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <4>;
num-viewport = <256>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@ -477,6 +479,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <4>;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@ -502,6 +505,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <8>;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@ -515,6 +519,96 @@
status = "disabled";
};
smmu: iommu@5000000 {
compatible = "arm,mmu-500";
reg = <0 0x5000000 0 0x800000>;
#iommu-cells = <1>;
stream-match-mask = <0x7C00>;
#global-interrupts = <12>;
// global secure fault
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
// combined secure
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
// global non-secure fault
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
// combined non-secure
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
// performance counter interrupts 0-7
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
// per context interrupt, 64 interrupts
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
};
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
@ -576,6 +670,8 @@
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
<0x00000000 0x08340000 0 0x40000>; /* MC control reg */
msi-parent = <&its>;
iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */
dma-coherent;
#address-cells = <3>;
#size-cells = <1>;
@ -649,5 +745,4 @@
method = "smc";
};
};
};

6
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
View File

@ -627,6 +627,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <4>;
num-viewport = <6>;
bus-range = <0x0 0xff>;
msi-parent = <&its>;
#interrupt-cells = <1>;
@ -648,6 +649,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <4>;
num-viewport = <6>;
bus-range = <0x0 0xff>;
msi-parent = <&its>;
#interrupt-cells = <1>;
@ -669,6 +671,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <8>;
num-viewport = <256>;
bus-range = <0x0 0xff>;
msi-parent = <&its>;
#interrupt-cells = <1>;
@ -690,6 +693,7 @@
device_type = "pci";
dma-coherent;
num-lanes = <4>;
num-viewport = <6>;
bus-range = <0x0 0xff>;
msi-parent = <&its>;
#interrupt-cells = <1>;
@ -727,6 +731,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb3@3110000 {
@ -737,6 +742,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
ccn@4000000 {

26
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
View File

@ -50,6 +50,32 @@
status = "okay";
};
&fspi {
status = "okay";
mt35xu512aba0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80";
m25p,fast-read;
spi-max-frequency = <50000000>;
reg = <0>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <8>;
};
mt35xu512aba1: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80";
m25p,fast-read;
spi-max-frequency = <50000000>;
reg = <1>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <8>;
};
};
&i2c0 {
status = "okay";

133
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
View File

@ -398,6 +398,7 @@
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
crypto: crypto@8000000 {
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
@ -542,6 +543,19 @@
status = "disabled";
};
fspi: spi@20c0000 {
compatible = "nxp,lx2160a-fspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x20c0000 0x0 0x10000>,
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>, <&clockgen 4 3>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
esdhc0: esdhc@2140000 {
compatible = "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
@ -658,6 +672,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
};
@ -668,6 +683,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
};
@ -762,5 +778,122 @@
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
};
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>,
<0x00000000 0x08340000 0 0x40000>;
msi-parent = <&its>;
/* iommu-map property is fixed up by u-boot */
iommu-map = <0 &smmu 0 0>;
dma-coherent;
#address-cells = <3>;
#size-cells = <1>;
/*
* Region type 0x0 - MC portals
* Region type 0x1 - QBMAN portals
*/
ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
/*
* Define the maximum number of MACs present on the SoC.
*/
dpmacs {
#address-cells = <1>;
#size-cells = <0>;
dpmac1: dpmac@1 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x1>;
};
dpmac2: dpmac@2 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x2>;
};
dpmac3: dpmac@3 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x3>;
};
dpmac4: dpmac@4 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x4>;
};
dpmac5: dpmac@5 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x5>;
};
dpmac6: dpmac@6 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x6>;
};
dpmac7: dpmac@7 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x7>;
};
dpmac8: dpmac@8 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x8>;
};
dpmac9: dpmac@9 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x9>;
};
dpmac10: dpmac@a {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xa>;
};
dpmac11: dpmac@b {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xb>;
};
dpmac12: dpmac@c {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xc>;
};
dpmac13: dpmac@d {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xd>;
};
dpmac14: dpmac@e {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xe>;
};
dpmac15: dpmac@f {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xf>;
};
dpmac16: dpmac@10 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x10>;
};
dpmac17: dpmac@11 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x11>;
};
dpmac18: dpmac@12 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x12>;
};
};
};
};
};

47
arch/arm64/boot/dts/freescale/imx8mq-evk.dts
View File

@ -37,7 +37,19 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
};
&i2c1 {
@ -137,6 +149,29 @@
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
&qspi0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi>;
status = "okay";
n25q256a: flash@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
};
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
@ -195,6 +230,18 @@
>;
};
pinctrl_qspi: qspigrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
>;
};
pinctrl_reg_usdhc2: regusdhc2grpgpio {
fsl,pins = <
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41

322
arch/arm64/boot/dts/freescale/imx8mq.dtsi
View File

@ -5,13 +5,13 @@
*/
#include <dt-bindings/clock/imx8mq-clock.h>
#include <dt-bindings/power/imx8mq-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx8mq-pinfunc.h"
/ {
/* This should really be the GPC, but we need a driver for this first */
interrupt-parent = <&gic>;
interrupt-parent = <&gpc>;
#address-cells = <2>;
#size-cells = <2>;
@ -25,6 +25,9 @@
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &ecspi3;
};
ckil: clock-ckil {
@ -117,6 +120,13 @@
};
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
@ -137,6 +147,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x3e000000>;
dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
bus@30000000 { /* AIPS1 */
compatible = "fsl,imx8mq-aips-bus", "simple-bus";
@ -199,36 +210,6 @@
#interrupt-cells = <2>;
};
iomuxc: iomuxc@30330000 {
compatible = "fsl,imx8mq-iomuxc";
reg = <0x30330000 0x10000>;
};
iomuxc_gpr: syscon@30340000 {
compatible = "fsl,imx8mq-iomuxc-gpr", "syscon";
reg = <0x30340000 0x10000>;
};
anatop: syscon@30360000 {
compatible = "fsl,imx8mq-anatop", "syscon";
reg = <0x30360000 0x10000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
};
clk: clock-controller@30380000 {
compatible = "fsl,imx8mq-ccm";
reg = <0x30380000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
<&clk_ext1>, <&clk_ext2>,
<&clk_ext3>, <&clk_ext4>;
clock-names = "ckil", "osc_25m", "osc_27m",
"clk_ext1", "clk_ext2",
"clk_ext3", "clk_ext4";
};
wdog1: watchdog@30280000 {
compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>;
@ -252,6 +233,122 @@
clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
status = "disabled";
};
iomuxc: iomuxc@30330000 {
compatible = "fsl,imx8mq-iomuxc";
reg = <0x30330000 0x10000>;
};
iomuxc_gpr: syscon@30340000 {
compatible = "fsl,imx8mq-iomuxc-gpr", "syscon";
reg = <0x30340000 0x10000>;
};
anatop: syscon@30360000 {
compatible = "fsl,imx8mq-anatop", "syscon";
reg = <0x30360000 0x10000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
};
snvs: snvs@30370000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x30370000 0x10000>;
snvs_rtc: snvs-rtc-lp{
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap =<&snvs>;
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
};
clk: clock-controller@30380000 {
compatible = "fsl,imx8mq-ccm";
reg = <0x30380000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
<&clk_ext1>, <&clk_ext2>,
<&clk_ext3>, <&clk_ext4>;
clock-names = "ckil", "osc_25m", "osc_27m",
"clk_ext1", "clk_ext2",
"clk_ext3", "clk_ext4";
};
gpc: gpc@303a0000 {
compatible = "fsl,imx8mq-gpc";
reg = <0x303a0000 0x10000>;
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <3>;
pgc {
#address-cells = <1>;
#size-cells = <0>;
pgc_mipi: power-domain@0 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_MIPI>;
};
pgc_pcie1: power-domain@1 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_PCIE1>;
};
pgc_otg1: power-domain@2 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_USB_OTG1>;
};
pgc_otg2: power-domain@3 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_USB_OTG2>;
};
pgc_ddr1: power-domain@4 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_DDR1>;
};
pgc_gpu: power-domain@5 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_GPU>;
clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
<&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
<&clk IMX8MQ_CLK_GPU_AXI>,
<&clk IMX8MQ_CLK_GPU_AHB>;
};
pgc_vpu: power-domain@6 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_VPU>;
};
pgc_disp: power-domain@7 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_DISP>;
};
pgc_mipi_csi1: power-domain@8 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>;
};
pgc_mipi_csi2: power-domain@9 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>;
};
pgc_pcie2: power-domain@a {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_PCIE2>;
};
};
};
};
bus@30400000 { /* AIPS2 */
@ -259,13 +356,94 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
pwm1: pwm@30660000 {
compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
<&clk IMX8MQ_CLK_PWM1_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm2: pwm@30670000 {
compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
reg = <0x30670000 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
<&clk IMX8MQ_CLK_PWM2_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm3: pwm@30680000 {
compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
reg = <0x30680000 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
<&clk IMX8MQ_CLK_PWM3_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm4: pwm@30690000 {
compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
reg = <0x30690000 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
<&clk IMX8MQ_CLK_PWM4_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
};
bus@30800000 { /* AIPS3 */
compatible = "fsl,imx8mq-aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>;
ranges = <0x30800000 0x30800000 0x400000>,
<0x08000000 0x08000000 0x10000000>;
ecspi1: spi@30820000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
reg = <0x30820000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
<&clk IMX8MQ_CLK_ECSPI1_ROOT>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi2: spi@30830000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
reg = <0x30830000 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
<&clk IMX8MQ_CLK_ECSPI2_ROOT>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi3: spi@30840000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
reg = <0x30840000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
<&clk IMX8MQ_CLK_ECSPI3_ROOT>;
clock-names = "ipg", "per";
status = "disabled";
};
uart1: serial@30860000 {
compatible = "fsl,imx8mq-uart",
@ -381,6 +559,20 @@
status = "disabled";
};
qspi0: spi@30bb0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi";
reg = <0x30bb0000 0x10000>,
<0x08000000 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>,
<&clk IMX8MQ_CLK_QSPI_ROOT>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
fec1: ethernet@30be0000 {
compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
@ -400,6 +592,70 @@
};
};
usb_dwc3_0: usb@38100000 {
compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
reg = <0x38100000 0x10000>;
clocks = <&clk IMX8MQ_CLK_USB_BUS>,
<&clk IMX8MQ_CLK_USB_CORE_REF>,
<&clk IMX8MQ_CLK_USB1_CTRL_ROOT>;
clock-names = "bus_early", "ref", "suspend";
assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
<&clk IMX8MQ_CLK_USB_CORE_REF>;
assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
<&clk IMX8MQ_SYS1_PLL_100M>;
assigned-clock-rates = <500000000>, <100000000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy0>, <&usb3_phy0>;
phy-names = "usb2-phy", "usb3-phy";
power-domains = <&pgc_otg1>;
usb3-resume-missing-cas;
status = "disabled";
};
usb3_phy0: usb-phy@381f0040 {
compatible = "fsl,imx8mq-usb-phy";
reg = <0x381f0040 0x40>;
clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
clock-names = "phy";
assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
assigned-clock-rates = <100000000>;
#phy-cells = <0>;
status = "disabled";
};
usb_dwc3_1: usb@38200000 {
compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
reg = <0x38200000 0x10000>;
clocks = <&clk IMX8MQ_CLK_USB_BUS>,
<&clk IMX8MQ_CLK_USB_CORE_REF>,
<&clk IMX8MQ_CLK_USB2_CTRL_ROOT>;
clock-names = "bus_early", "ref", "suspend";
assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
<&clk IMX8MQ_CLK_USB_CORE_REF>;
assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
<&clk IMX8MQ_SYS1_PLL_100M>;
assigned-clock-rates = <500000000>, <100000000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy1>, <&usb3_phy1>;
phy-names = "usb2-phy", "usb3-phy";
power-domains = <&pgc_otg2>;
usb3-resume-missing-cas;
status = "disabled";
};
usb3_phy1: usb-phy@382f0040 {
compatible = "fsl,imx8mq-usb-phy";
reg = <0x382f0040 0x40>;
clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>;
clock-names = "phy";
assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
assigned-clock-rates = <100000000>;
#phy-cells = <0>;
status = "disabled";
};
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>, /* GIC Dist */

137
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts Normal file
View File

@ -0,0 +1,137 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017~2018 NXP
*/
/dts-v1/;
#include "imx8qxp.dtsi"
/ {
model = "Freescale i.MX8QXP MEK";
compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
chosen {
stdout-path = &adma_lpuart0;
};
memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0 0x40000000>;
};
reg_usdhc2_vmmc: usdhc2-vmmc {
compatible = "regulator-fixed";
regulator-name = "SD1_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adma_lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <8>;
no-sd;
no-sdio;
non-removable;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
vmmc-supply = <&reg_usdhc2_vmmc>;
cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&iomuxc {
pinctrl_fec1: fec1grp {
fsl,pins = <
IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020
IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020
IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020
IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020
IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020
IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020
IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020
IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020
IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020
IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020
IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020
IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020
IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020
>;
};
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020
IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
>;
};
};

446
arch/arm64/boot/dts/freescale/imx8qxp.dtsi Normal file
View File

@ -0,0 +1,446 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
* Copyright 2017-2018 NXP
* Dong Aisheng <aisheng.dong@nxp.com>
*/
#include <dt-bindings/clock/imx8-clock.h>
#include <dt-bindings/firmware/imx/rsrc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/pads-imx8qxp.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
serial0 = &adma_lpuart0;
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
/* We have 1 clusters with 4 Cortex-A35 cores */
A35_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
};
A35_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
};
A35_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
};
A35_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
};
A35_L2: l2-cache0 {
compatible = "cache";
};
};
gic: interrupt-controller@51a00000 {
compatible = "arm,gic-v3";
reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
<0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
scu {
compatible = "fsl,imx-scu";
mbox-names = "tx0", "tx1", "tx2", "tx3",
"rx0", "rx1", "rx2", "rx3";
mboxes = <&lsio_mu1 0 0
&lsio_mu1 0 1
&lsio_mu1 0 2
&lsio_mu1 0 3
&lsio_mu1 1 0
&lsio_mu1 1 1
&lsio_mu1 1 2
&lsio_mu1 1 3>;
clk: clock-controller {
compatible = "fsl,imx8qxp-clk";
#clock-cells = <1>;
clocks = <&xtal32k &xtal24m>;
clock-names = "xtal_32KHz", "xtal_24Mhz";
};
iomuxc: pinctrl {
compatible = "fsl,imx8qxp-iomuxc";
};
pd: imx8qx-pd {
compatible = "fsl,imx8qxp-scu-pd";
#power-domain-cells = <1>;
};
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
};
xtal32k: clock-xtal32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xtal_32KHz";
};
xtal24m: clock-xtal24m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "xtal_24MHz";
};
adma_subsys: bus@59000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x59000000 0x0 0x59000000 0x2000000>;
adma_lpcg: clock-controller@59000000 {
compatible = "fsl,imx8qxp-lpcg-adma";
reg = <0x59000000 0x2000000>;
#clock-cells = <1>;
};
adma_lpuart0: serial@5a060000 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x5a060000 0x1000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
clock-names = "ipg";
power-domains = <&pd IMX_SC_R_UART_0>;
status = "disabled";
};
adma_i2c0: i2c@5a800000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a800000 0x4000>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_0>;
status = "disabled";
};
adma_i2c1: i2c@5a810000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a810000 0x4000>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_1>;
status = "disabled";
};
adma_i2c2: i2c@5a820000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a820000 0x4000>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_2>;
status = "disabled";
};
adma_i2c3: i2c@5a830000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a830000 0x4000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>;
clock-names = "per";
assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>;
assigned-clock-rates = <24000000>;
power-domains = <&pd IMX_SC_R_I2C_3>;
status = "disabled";
};
};
conn_subsys: bus@5b000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
conn_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg-conn";
reg = <0x5b200000 0xb0000>;
#clock-cells = <1>;
};
usdhc1: mmc@5b010000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b010000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
clock-names = "ipg", "per", "ahb";
assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
assigned-clock-rates = <200000000>;
power-domains = <&pd IMX_SC_R_SDHC_0>;
status = "disabled";
};
usdhc2: mmc@5b020000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b020000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
clock-names = "ipg", "per", "ahb";
assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
assigned-clock-rates = <200000000>;
power-domains = <&pd IMX_SC_R_SDHC_1>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
status = "disabled";
};
usdhc3: mmc@5b030000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b030000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>;
clock-names = "ipg", "per", "ahb";
assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>;
assigned-clock-rates = <200000000>;
power-domains = <&pd IMX_SC_R_SDHC_2>;
status = "disabled";
};
fec1: ethernet@5b040000 {
compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
reg = <0x5b040000 0x10000>;
interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>;
clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
power-domains = <&pd IMX_SC_R_ENET_0>;
status = "disabled";
};
fec2: ethernet@5b050000 {
compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
reg = <0x5b050000 0x10000>;
interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>,
<&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>;
clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
fsl,num-tx-queues=<3>;
fsl,num-rx-queues=<3>;
power-domains = <&pd IMX_SC_R_ENET_1>;
status = "disabled";
};
};
lsio_subsys: bus@5d000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
lsio_lpcg: clock-controller@5d400000 {
compatible = "fsl,imx8qxp-lpcg-lsio";
reg = <0x5d400000 0x400000>;
#clock-cells = <1>;
};
lsio_mu0: mailbox@5d1b0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1b0000 0x10000>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <0>;
status = "disabled";
};
lsio_mu1: mailbox@5d1c0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1c0000 0x10000>;
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
};
lsio_mu3: mailbox@5d1e0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1e0000 0x10000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <0>;
status = "disabled";
};
lsio_mu4: mailbox@5d1f0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1f0000 0x10000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <0>;
status = "disabled";
};
lsio_gpio0: gpio@5d080000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d080000 0x10000>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_0>;
};
lsio_gpio1: gpio@5d090000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d090000 0x10000>;
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_1>;
};
lsio_gpio2: gpio@5d0a0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0a0000 0x10000>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_2>;
};
lsio_gpio3: gpio@5d0b0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0b0000 0x10000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_3>;
};
lsio_gpio4: gpio@5d0c0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0c0000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_4>;
};
lsio_gpio5: gpio@5d0d0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0d0000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_5>;
};
lsio_gpio6: gpio@5d0e0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0e0000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_6>;
};
lsio_gpio7: gpio@5d0f0000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
reg = <0x5d0f0000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_7>;
};
};
};