leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ide: (hopefully) fix VDMA for CS5520

Browse Source 
* Set the correct hwif->dma_base for the second channel in
  ide_get_or_set_dma_base().

* Remove DMA enable code from cs5520_set_pio_mode(), this can
  be handled by the generic ->dma_host_on method now.

* Add VDMA check to ide_config_drive_speed().

* drive->using_dma was never enabled since cs5520 host driver's
  ->ide_dma_on method overrided the generic ->ide_dma_on (so
  __ide_dma_on() was never called, drive->using_dma was never set
  and VDMA was never used since it depends on drive->using_dma).

  Fix it by using ->dma_host_on method instead of ->ide_dma_on
  (also add matching ->dma_host_off method).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2008-01-26 20:12:59 +01:00
parent 29ec683f01
commit aea5d37560
3 changed files with 25 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/ide/ide-iops.c
View File

@ -799,7 +799,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
if (speed >= XFER_SW_DMA_0)
if (speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA))
hwif->dma_host_on(drive);
else if (hwif->ide_dma_on) /* check if host supports DMA */
hwif->dma_off_quietly(drive);

29
drivers/ide/pci/cs5520.c
View File

@ -71,7 +71,6 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *pdev = hwif->pci_dev;
int controller = drive->dn > 1 ? 1 : 0;
u8 reg;
/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
@ -91,11 +90,6 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
(cs5520_pio_clocks[pio].recovery << 4) |
(cs5520_pio_clocks[pio].assert));
/* Set the DMA enable/disable flag */
reg = inb(hwif->dma_base + 0x02 + 8*controller);
reg |= 1<<((drive->dn&1)+5);
outb(reg, hwif->dma_base + 0x02 + 8*controller);
}
static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
@ -109,13 +103,23 @@ static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
* We wrap the DMA activate to set the vdma flag. This is needed
* so that the IDE DMA layer issues PIO not DMA commands over the
* DMA channel
*
* ATAPI is harder so disable it for now using IDE_HFLAG_NO_ATAPI_DMA
*/
static int cs5520_dma_on(ide_drive_t *drive)
static void cs5520_dma_host_on(ide_drive_t *drive)
{
/* ATAPI is harder so leave it for now */
drive->vdma = 1;
return 0;
if (drive->using_dma)
drive->vdma = 1;
ide_dma_host_on(drive);
}
static void cs5520_dma_host_off(ide_drive_t *drive)
{
drive->vdma = 0;
ide_dma_host_off(drive);
}
static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
@ -126,7 +130,8 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
if (hwif->dma_base == 0)
return;
hwif->ide_dma_on = &cs5520_dma_on;
hwif->dma_host_on = &cs5520_dma_host_on;
hwif->dma_host_off = &cs5520_dma_host_off;
}
#define DECLARE_CS_DEV(name_str) \

10
drivers/ide/setup-pci.c
View File

@ -165,13 +165,17 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_
dma_base = pci_resource_start(dev, baridx);
if (dma_base == 0)
if (dma_base == 0) {
printk(KERN_ERR "%s: DMA base is invalid\n", d->name);
return 0;
}
}
if ((d->host_flags & IDE_HFLAG_CS5520) == 0 && dma_base) {
if (hwif->channel)
dma_base += 8;
if ((d->host_flags & IDE_HFLAG_CS5520) == 0) {
u8 simplex_stat = 0;
dma_base += hwif->channel ? 8 : 0;
switch(dev->device) {
case PCI_DEVICE_ID_AL_M5219: