ASoC: da7218: Update PLL ranges and dividers to improve locking

The expected MCLK frequency ranges and the associated dividers
are updated to improve PLL locking in a corner scenario, with low
MCLK frequency near an input divider change boundary.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Adam Thomson 2016-04-22 14:16:26 +01:00 committed by Mark Brown
parent f55532a0c0
commit ae48a35c40
2 changed files with 28 additions and 25 deletions

View File

@ -1868,27 +1868,27 @@ static int da7218_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
/* Verify 32KHz, 2MHz - 54MHz MCLK provided, and set input divider */ /* Verify 32KHz, 2MHz - 54MHz MCLK provided, and set input divider */
if (da7218->mclk_rate == 32768) { if (da7218->mclk_rate == 32768) {
indiv_bits = DA7218_PLL_INDIV_2_5_MHZ; indiv_bits = DA7218_PLL_INDIV_9_TO_18_MHZ;
indiv = DA7218_PLL_INDIV_2_10_MHZ_VAL; indiv = DA7218_PLL_INDIV_9_TO_18_MHZ_VAL;
} else if (da7218->mclk_rate < 2000000) { } else if (da7218->mclk_rate < 2000000) {
dev_err(codec->dev, "PLL input clock %d below valid range\n", dev_err(codec->dev, "PLL input clock %d below valid range\n",
da7218->mclk_rate); da7218->mclk_rate);
return -EINVAL; return -EINVAL;
} else if (da7218->mclk_rate <= 5000000) { } else if (da7218->mclk_rate <= 4500000) {
indiv_bits = DA7218_PLL_INDIV_2_5_MHZ; indiv_bits = DA7218_PLL_INDIV_2_TO_4_5_MHZ;
indiv = DA7218_PLL_INDIV_2_10_MHZ_VAL; indiv = DA7218_PLL_INDIV_2_TO_4_5_MHZ_VAL;
} else if (da7218->mclk_rate <= 10000000) { } else if (da7218->mclk_rate <= 9000000) {
indiv_bits = DA7218_PLL_INDIV_5_10_MHZ; indiv_bits = DA7218_PLL_INDIV_4_5_TO_9_MHZ;
indiv = DA7218_PLL_INDIV_2_10_MHZ_VAL; indiv = DA7218_PLL_INDIV_4_5_TO_9_MHZ_VAL;
} else if (da7218->mclk_rate <= 20000000) { } else if (da7218->mclk_rate <= 18000000) {
indiv_bits = DA7218_PLL_INDIV_10_20_MHZ; indiv_bits = DA7218_PLL_INDIV_9_TO_18_MHZ;
indiv = DA7218_PLL_INDIV_10_20_MHZ_VAL; indiv = DA7218_PLL_INDIV_9_TO_18_MHZ_VAL;
} else if (da7218->mclk_rate <= 40000000) { } else if (da7218->mclk_rate <= 36000000) {
indiv_bits = DA7218_PLL_INDIV_20_40_MHZ; indiv_bits = DA7218_PLL_INDIV_18_TO_36_MHZ;
indiv = DA7218_PLL_INDIV_20_40_MHZ_VAL; indiv = DA7218_PLL_INDIV_18_TO_36_MHZ_VAL;
} else if (da7218->mclk_rate <= 54000000) { } else if (da7218->mclk_rate <= 54000000) {
indiv_bits = DA7218_PLL_INDIV_40_54_MHZ; indiv_bits = DA7218_PLL_INDIV_36_TO_54_MHZ;
indiv = DA7218_PLL_INDIV_40_54_MHZ_VAL; indiv = DA7218_PLL_INDIV_36_TO_54_MHZ_VAL;
} else { } else {
dev_err(codec->dev, "PLL input clock %d above valid range\n", dev_err(codec->dev, "PLL input clock %d above valid range\n",
da7218->mclk_rate); da7218->mclk_rate);

View File

@ -876,15 +876,11 @@
/* DA7218_PLL_CTRL = 0x91 */ /* DA7218_PLL_CTRL = 0x91 */
#define DA7218_PLL_INDIV_SHIFT 0 #define DA7218_PLL_INDIV_SHIFT 0
#define DA7218_PLL_INDIV_MASK (0x7 << 0) #define DA7218_PLL_INDIV_MASK (0x7 << 0)
#define DA7218_PLL_INDIV_2_5_MHZ (0x0 << 0) #define DA7218_PLL_INDIV_2_TO_4_5_MHZ (0x0 << 0)
#define DA7218_PLL_INDIV_5_10_MHZ (0x1 << 0) #define DA7218_PLL_INDIV_4_5_TO_9_MHZ (0x1 << 0)
#define DA7218_PLL_INDIV_10_20_MHZ (0x2 << 0) #define DA7218_PLL_INDIV_9_TO_18_MHZ (0x2 << 0)
#define DA7218_PLL_INDIV_20_40_MHZ (0x3 << 0) #define DA7218_PLL_INDIV_18_TO_36_MHZ (0x3 << 0)
#define DA7218_PLL_INDIV_40_54_MHZ (0x4 << 0) #define DA7218_PLL_INDIV_36_TO_54_MHZ (0x4 << 0)
#define DA7218_PLL_INDIV_2_10_MHZ_VAL 2
#define DA7218_PLL_INDIV_10_20_MHZ_VAL 4
#define DA7218_PLL_INDIV_20_40_MHZ_VAL 8
#define DA7218_PLL_INDIV_40_54_MHZ_VAL 16
#define DA7218_PLL_MCLK_SQR_EN_SHIFT 4 #define DA7218_PLL_MCLK_SQR_EN_SHIFT 4
#define DA7218_PLL_MCLK_SQR_EN_MASK (0x1 << 4) #define DA7218_PLL_MCLK_SQR_EN_MASK (0x1 << 4)
#define DA7218_PLL_MODE_SHIFT 6 #define DA7218_PLL_MODE_SHIFT 6
@ -1336,6 +1332,13 @@
#define DA7218_PLL_FREQ_OUT_90316 90316800 #define DA7218_PLL_FREQ_OUT_90316 90316800
#define DA7218_PLL_FREQ_OUT_98304 98304000 #define DA7218_PLL_FREQ_OUT_98304 98304000
/* PLL Frequency Dividers */
#define DA7218_PLL_INDIV_2_TO_4_5_MHZ_VAL 1
#define DA7218_PLL_INDIV_4_5_TO_9_MHZ_VAL 2
#define DA7218_PLL_INDIV_9_TO_18_MHZ_VAL 4
#define DA7218_PLL_INDIV_18_TO_36_MHZ_VAL 8
#define DA7218_PLL_INDIV_36_TO_54_MHZ_VAL 16
/* ALC Calibration */ /* ALC Calibration */
#define DA7218_ALC_CALIB_DELAY_MIN 2500 #define DA7218_ALC_CALIB_DELAY_MIN 2500
#define DA7218_ALC_CALIB_DELAY_MAX 5000 #define DA7218_ALC_CALIB_DELAY_MAX 5000