forked from Minki/linux
ASoC: add ep93xx AC97 audio driver
Add support for AC97 controllers found in Cirrus Logic EP93xx family SoCs. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Mika Westerberg
Mark Brown
parent
a34712391a
commit
aa7e1b84c6
@ -3,11 +3,16 @@ config SND_EP93XX_SOC
|
||||
depends on ARCH_EP93XX && SND_SOC
|
||||
help
|
||||
Say Y or M if you want to add support for codecs attached to
|
||||
the EP93xx I2S interface.
|
||||
the EP93xx I2S or AC97 interfaces.
|
||||
|
||||
config SND_EP93XX_SOC_I2S
|
||||
tristate
|
||||
|
||||
config SND_EP93XX_SOC_AC97
|
||||
tristate
|
||||
select AC97_BUS
|
||||
select SND_SOC_AC97_BUS
|
||||
|
||||
config SND_EP93XX_SOC_SNAPPERCL15
|
||||
tristate "SoC Audio support for Bluewater Systems Snapper CL15 module"
|
||||
depends on SND_EP93XX_SOC && MACH_SNAPPER_CL15
|
||||
|
||||
@ -1,9 +1,11 @@
|
||||
# EP93xx Platform Support
|
||||
snd-soc-ep93xx-objs := ep93xx-pcm.o
|
||||
snd-soc-ep93xx-i2s-objs := ep93xx-i2s.o
|
||||
snd-soc-ep93xx-ac97-objs := ep93xx-ac97.o
|
||||
|
||||
obj-$(CONFIG_SND_EP93XX_SOC) += snd-soc-ep93xx.o
|
||||
obj-$(CONFIG_SND_EP93XX_SOC_I2S) += snd-soc-ep93xx-i2s.o
|
||||
obj-$(CONFIG_SND_EP93XX_SOC_AC97) += snd-soc-ep93xx-ac97.o
|
||||
|
||||
# EP93XX Machine Support
|
||||
snd-soc-snappercl15-objs := snappercl15.o
|
||||
|
||||
468
sound/soc/ep93xx/ep93xx-ac97.c
Normal file
468
sound/soc/ep93xx/ep93xx-ac97.c
Normal file
@ -0,0 +1,468 @@
|
||||
/*
|
||||
* ASoC driver for Cirrus Logic EP93xx AC97 controller.
|
||||
*
|
||||
* Copyright (c) 2010 Mika Westerberg
|
||||
*
|
||||
* Based on s3c-ac97 ASoC driver by Jaswinder Singh.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <sound/core.h>
|
||||
#include <sound/ac97_codec.h>
|
||||
#include <sound/soc.h>
|
||||
|
||||
#include <mach/dma.h>
|
||||
#include "ep93xx-pcm.h"
|
||||
|
||||
/*
|
||||
* Per channel (1-4) registers.
|
||||
*/
|
||||
#define AC97CH(n) (((n) - 1) * 0x20)
|
||||
|
||||
#define AC97DR(n) (AC97CH(n) + 0x0000)
|
||||
|
||||
#define AC97RXCR(n) (AC97CH(n) + 0x0004)
|
||||
#define AC97RXCR_REN BIT(0)
|
||||
#define AC97RXCR_RX3 BIT(3)
|
||||
#define AC97RXCR_RX4 BIT(4)
|
||||
#define AC97RXCR_CM BIT(15)
|
||||
|
||||
#define AC97TXCR(n) (AC97CH(n) + 0x0008)
|
||||
#define AC97TXCR_TEN BIT(0)
|
||||
#define AC97TXCR_TX3 BIT(3)
|
||||
#define AC97TXCR_TX4 BIT(4)
|
||||
#define AC97TXCR_CM BIT(15)
|
||||
|
||||
#define AC97SR(n) (AC97CH(n) + 0x000c)
|
||||
#define AC97SR_TXFE BIT(1)
|
||||
#define AC97SR_TXUE BIT(6)
|
||||
|
||||
#define AC97RISR(n) (AC97CH(n) + 0x0010)
|
||||
#define AC97ISR(n) (AC97CH(n) + 0x0014)
|
||||
#define AC97IE(n) (AC97CH(n) + 0x0018)
|
||||
|
||||
/*
|
||||
* Global AC97 controller registers.
|
||||
*/
|
||||
#define AC97S1DATA 0x0080
|
||||
#define AC97S2DATA 0x0084
|
||||
#define AC97S12DATA 0x0088
|
||||
|
||||
#define AC97RGIS 0x008c
|
||||
#define AC97GIS 0x0090
|
||||
#define AC97IM 0x0094
|
||||
/*
|
||||
* Common bits for RGIS, GIS and IM registers.
|
||||
*/
|
||||
#define AC97_SLOT2RXVALID BIT(1)
|
||||
#define AC97_CODECREADY BIT(5)
|
||||
#define AC97_SLOT2TXCOMPLETE BIT(6)
|
||||
|
||||
#define AC97EOI 0x0098
|
||||
#define AC97EOI_WINT BIT(0)
|
||||
#define AC97EOI_CODECREADY BIT(1)
|
||||
|
||||
#define AC97GCR 0x009c
|
||||
#define AC97GCR_AC97IFE BIT(0)
|
||||
|
||||
#define AC97RESET 0x00a0
|
||||
#define AC97RESET_TIMEDRESET BIT(0)
|
||||
|
||||
#define AC97SYNC 0x00a4
|
||||
#define AC97SYNC_TIMEDSYNC BIT(0)
|
||||
|
||||
#define AC97_TIMEOUT msecs_to_jiffies(5)
|
||||
|
||||
/**
|
||||
* struct ep93xx_ac97_info - EP93xx AC97 controller info structure
|
||||
* @lock: mutex serializing access to the bus (slot 1 & 2 ops)
|
||||
* @dev: pointer to the platform device dev structure
|
||||
* @mem: physical memory resource for the registers
|
||||
* @regs: mapped AC97 controller registers
|
||||
* @irq: AC97 interrupt number
|
||||
* @done: bus ops wait here for an interrupt
|
||||
*/
|
||||
struct ep93xx_ac97_info {
|
||||
struct mutex lock;
|
||||
struct device *dev;
|
||||
struct resource *mem;
|
||||
void __iomem *regs;
|
||||
int irq;
|
||||
struct completion done;
|
||||
};
|
||||
|
||||
/* currently ALSA only supports a single AC97 device */
|
||||
static struct ep93xx_ac97_info *ep93xx_ac97_info;
|
||||
|
||||
static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_out = {
|
||||
.name = "ac97-pcm-out",
|
||||
.dma_port = EP93XX_DMA_M2P_PORT_AAC1,
|
||||
};
|
||||
|
||||
static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_in = {
|
||||
.name = "ac97-pcm-in",
|
||||
.dma_port = EP93XX_DMA_M2P_PORT_AAC1,
|
||||
};
|
||||
|
||||
static inline unsigned ep93xx_ac97_read_reg(struct ep93xx_ac97_info *info,
|
||||
unsigned reg)
|
||||
{
|
||||
return __raw_readl(info->regs + reg);
|
||||
}
|
||||
|
||||
static inline void ep93xx_ac97_write_reg(struct ep93xx_ac97_info *info,
|
||||
unsigned reg, unsigned val)
|
||||
{
|
||||
__raw_writel(val, info->regs + reg);
|
||||
}
|
||||
|
||||
static unsigned short ep93xx_ac97_read(struct snd_ac97 *ac97,
|
||||
unsigned short reg)
|
||||
{
|
||||
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
||||
unsigned short val;
|
||||
|
||||
mutex_lock(&info->lock);
|
||||
|
||||
ep93xx_ac97_write_reg(info, AC97S1DATA, reg);
|
||||
ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2RXVALID);
|
||||
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) {
|
||||
dev_warn(info->dev, "timeout reading register %x\n", reg);
|
||||
mutex_unlock(&info->lock);
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
val = (unsigned short)ep93xx_ac97_read_reg(info, AC97S2DATA);
|
||||
|
||||
mutex_unlock(&info->lock);
|
||||
return val;
|
||||
}
|
||||
|
||||
static void ep93xx_ac97_write(struct snd_ac97 *ac97,
|
||||
unsigned short reg,
|
||||
unsigned short val)
|
||||
{
|
||||
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
||||
|
||||
mutex_lock(&info->lock);
|
||||
|
||||
/*
|
||||
* Writes to the codec need to be done so that slot 2 is filled in
|
||||
* before slot 1.
|
||||
*/
|
||||
ep93xx_ac97_write_reg(info, AC97S2DATA, val);
|
||||
ep93xx_ac97_write_reg(info, AC97S1DATA, reg);
|
||||
|
||||
ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2TXCOMPLETE);
|
||||
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
|
||||
dev_warn(info->dev, "timeout writing register %x\n", reg);
|
||||
|
||||
mutex_unlock(&info->lock);
|
||||
}
|
||||
|
||||
static void ep93xx_ac97_warm_reset(struct snd_ac97 *ac97)
|
||||
{
|
||||
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
||||
|
||||
mutex_lock(&info->lock);
|
||||
|
||||
/*
|
||||
* We are assuming that before this functions gets called, the codec
|
||||
* BIT_CLK is stopped by forcing the codec into powerdown mode. We can
|
||||
* control the SYNC signal directly via AC97SYNC register. Using
|
||||
* TIMEDSYNC the controller will keep the SYNC high > 1us.
|
||||
*/
|
||||
ep93xx_ac97_write_reg(info, AC97SYNC, AC97SYNC_TIMEDSYNC);
|
||||
ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY);
|
||||
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
|
||||
dev_warn(info->dev, "codec warm reset timeout\n");
|
||||
|
||||
mutex_unlock(&info->lock);
|
||||
}
|
||||
|
||||
static void ep93xx_ac97_cold_reset(struct snd_ac97 *ac97)
|
||||
{
|
||||
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
||||
|
||||
mutex_lock(&info->lock);
|
||||
|
||||
/*
|
||||
* For doing cold reset, we disable the AC97 controller interface, clear
|
||||
* WINT and CODECREADY bits, and finally enable the interface again.
|
||||
*/
|
||||
ep93xx_ac97_write_reg(info, AC97GCR, 0);
|
||||
ep93xx_ac97_write_reg(info, AC97EOI, AC97EOI_CODECREADY | AC97EOI_WINT);
|
||||
ep93xx_ac97_write_reg(info, AC97GCR, AC97GCR_AC97IFE);
|
||||
|
||||
/*
|
||||
* Now, assert the reset and wait for the codec to become ready.
|
||||
*/
|
||||
ep93xx_ac97_write_reg(info, AC97RESET, AC97RESET_TIMEDRESET);
|
||||
ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY);
|
||||
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
|
||||
dev_warn(info->dev, "codec cold reset timeout\n");
|
||||
|
||||
/*
|
||||
* Give the codec some time to come fully out from the reset. This way
|
||||
* we ensure that the subsequent reads/writes will work.
|
||||
*/
|
||||
usleep_range(15000, 20000);
|
||||
|
||||
mutex_unlock(&info->lock);
|
||||
}
|
||||
|
||||
static irqreturn_t ep93xx_ac97_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct ep93xx_ac97_info *info = dev_id;
|
||||
unsigned status, mask;
|
||||
|
||||
/*
|
||||
* Just mask out the interrupt and wake up the waiting thread.
|
||||
* Interrupts are cleared via reading/writing to slot 1 & 2 registers by
|
||||
* the waiting thread.
|
||||
*/
|
||||
status = ep93xx_ac97_read_reg(info, AC97GIS);
|
||||
mask = ep93xx_ac97_read_reg(info, AC97IM);
|
||||
mask &= ~status;
|
||||
ep93xx_ac97_write_reg(info, AC97IM, mask);
|
||||
|
||||
complete(&info->done);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
struct snd_ac97_bus_ops soc_ac97_ops = {
|
||||
.read = ep93xx_ac97_read,
|
||||
.write = ep93xx_ac97_write,
|
||||
.reset = ep93xx_ac97_cold_reset,
|
||||
.warm_reset = ep93xx_ac97_warm_reset,
|
||||
};
|
||||
EXPORT_SYMBOL_GPL(soc_ac97_ops);
|
||||
|
||||
static int ep93xx_ac97_trigger(struct snd_pcm_substream *substream,
|
||||
int cmd, struct snd_soc_dai *dai)
|
||||
{
|
||||
struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai);
|
||||
unsigned v = 0;
|
||||
|
||||
|
||||
switch (cmd) {
|
||||
case SNDRV_PCM_TRIGGER_START:
|
||||
case SNDRV_PCM_TRIGGER_RESUME:
|
||||
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
||||
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
||||
/*
|
||||
* Enable compact mode, TX slots 3 & 4, and the TX FIFO
|
||||
* itself.
|
||||
*/
|
||||
v |= AC97TXCR_CM;
|
||||
v |= AC97TXCR_TX3 | AC97TXCR_TX4;
|
||||
v |= AC97TXCR_TEN;
|
||||
ep93xx_ac97_write_reg(info, AC97TXCR(1), v);
|
||||
} else {
|
||||
/*
|
||||
* Enable compact mode, RX slots 3 & 4, and the RX FIFO
|
||||
* itself.
|
||||
*/
|
||||
v |= AC97RXCR_CM;
|
||||
v |= AC97RXCR_RX3 | AC97RXCR_RX4;
|
||||
v |= AC97RXCR_REN;
|
||||
ep93xx_ac97_write_reg(info, AC97RXCR(1), v);
|
||||
}
|
||||
break;
|
||||
|
||||
case SNDRV_PCM_TRIGGER_STOP:
|
||||
case SNDRV_PCM_TRIGGER_SUSPEND:
|
||||
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
||||
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
||||
/*
|
||||
* As per Cirrus EP93xx errata described below:
|
||||
*
|
||||
* http://www.cirrus.com/en/pubs/errata/ER667E2B.pdf
|
||||
*
|
||||
* we will wait for the TX FIFO to be empty before
|
||||
* clearing the TEN bit.
|
||||
*/
|
||||
unsigned long timeout = jiffies + AC97_TIMEOUT;
|
||||
|
||||
do {
|
||||
v = ep93xx_ac97_read_reg(info, AC97SR(1));
|
||||
if (time_after(jiffies, timeout)) {
|
||||
dev_warn(info->dev, "TX timeout\n");
|
||||
break;
|
||||
}
|
||||
} while (!(v & (AC97SR_TXFE | AC97SR_TXUE)));
|
||||
|
||||
/* disable the TX FIFO */
|
||||
ep93xx_ac97_write_reg(info, AC97TXCR(1), 0);
|
||||
} else {
|
||||
/* disable the RX FIFO */
|
||||
ep93xx_ac97_write_reg(info, AC97RXCR(1), 0);
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
dev_warn(info->dev, "unknown command %d\n", cmd);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ep93xx_ac97_startup(struct snd_pcm_substream *substream,
|
||||
struct snd_soc_dai *dai)
|
||||
{
|
||||
struct ep93xx_pcm_dma_params *dma_data;
|
||||
|
||||
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
||||
dma_data = &ep93xx_ac97_pcm_out;
|
||||
else
|
||||
dma_data = &ep93xx_ac97_pcm_in;
|
||||
|
||||
snd_soc_dai_set_dma_data(dai, substream, dma_data);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct snd_soc_dai_ops ep93xx_ac97_dai_ops = {
|
||||
.startup = ep93xx_ac97_startup,
|
||||
.trigger = ep93xx_ac97_trigger,
|
||||
};
|
||||
|
||||
struct snd_soc_dai_driver ep93xx_ac97_dai = {
|
||||
.name = "ep93xx-ac97",
|
||||
.id = 0,
|
||||
.ac97_control = 1,
|
||||
.playback = {
|
||||
.stream_name = "AC97 Playback",
|
||||
.channels_min = 2,
|
||||
.channels_max = 2,
|
||||
.rates = SNDRV_PCM_RATE_8000_48000,
|
||||
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
||||
},
|
||||
.capture = {
|
||||
.stream_name = "AC97 Capture",
|
||||
.channels_min = 2,
|
||||
.channels_max = 2,
|
||||
.rates = SNDRV_PCM_RATE_8000_48000,
|
||||
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
||||
},
|
||||
.ops = &ep93xx_ac97_dai_ops,
|
||||
};
|
||||
|
||||
static int __devinit ep93xx_ac97_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct ep93xx_ac97_info *info;
|
||||
int ret;
|
||||
|
||||
info = kzalloc(sizeof(struct ep93xx_ac97_info), GFP_KERNEL);
|
||||
if (!info)
|
||||
return -ENOMEM;
|
||||
|
||||
dev_set_drvdata(&pdev->dev, info);
|
||||
|
||||
mutex_init(&info->lock);
|
||||
init_completion(&info->done);
|
||||
info->dev = &pdev->dev;
|
||||
|
||||
info->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!info->mem) {
|
||||
ret = -ENXIO;
|
||||
goto fail_free_info;
|
||||
}
|
||||
|
||||
info->irq = platform_get_irq(pdev, 0);
|
||||
if (!info->irq) {
|
||||
ret = -ENXIO;
|
||||
goto fail_free_info;
|
||||
}
|
||||
|
||||
if (!request_mem_region(info->mem->start, resource_size(info->mem),
|
||||
pdev->name)) {
|
||||
ret = -EBUSY;
|
||||
goto fail_free_info;
|
||||
}
|
||||
|
||||
info->regs = ioremap(info->mem->start, resource_size(info->mem));
|
||||
if (!info->regs) {
|
||||
ret = -ENOMEM;
|
||||
goto fail_release_mem;
|
||||
}
|
||||
|
||||
ret = request_irq(info->irq, ep93xx_ac97_interrupt, IRQF_TRIGGER_HIGH,
|
||||
pdev->name, info);
|
||||
if (ret)
|
||||
goto fail_unmap_mem;
|
||||
|
||||
ep93xx_ac97_info = info;
|
||||
platform_set_drvdata(pdev, info);
|
||||
|
||||
ret = snd_soc_register_dai(&pdev->dev, &ep93xx_ac97_dai);
|
||||
if (ret)
|
||||
goto fail_free_irq;
|
||||
|
||||
return 0;
|
||||
|
||||
fail_free_irq:
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
free_irq(info->irq, info);
|
||||
fail_unmap_mem:
|
||||
iounmap(info->regs);
|
||||
fail_release_mem:
|
||||
release_mem_region(info->mem->start, resource_size(info->mem));
|
||||
fail_free_info:
|
||||
kfree(info);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit ep93xx_ac97_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct ep93xx_ac97_info *info = platform_get_drvdata(pdev);
|
||||
|
||||
snd_soc_unregister_dai(&pdev->dev);
|
||||
|
||||
/* disable the AC97 controller */
|
||||
ep93xx_ac97_write_reg(info, AC97GCR, 0);
|
||||
|
||||
free_irq(info->irq, info);
|
||||
iounmap(info->regs);
|
||||
release_mem_region(info->mem->start, resource_size(info->mem));
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
kfree(info);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver ep93xx_ac97_driver = {
|
||||
.probe = ep93xx_ac97_probe,
|
||||
.remove = __devexit_p(ep93xx_ac97_remove),
|
||||
.driver = {
|
||||
.name = "ep93xx-ac97",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init ep93xx_ac97_init(void)
|
||||
{
|
||||
return platform_driver_register(&ep93xx_ac97_driver);
|
||||
}
|
||||
module_init(ep93xx_ac97_init);
|
||||
|
||||
static void __exit ep93xx_ac97_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&ep93xx_ac97_driver);
|
||||
}
|
||||
module_exit(ep93xx_ac97_exit);
|
||||
|
||||
MODULE_DESCRIPTION("EP93xx AC97 ASoC Driver");
|
||||
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("platform:ep93xx-ac97");
|
||||
Loading…
Reference in New Issue
Block a user