forked from Minki/linux
ARM: dts: update display related nodes for exynos5250-snow
Add DT nodes for ptn3460 bridge chip and panel. Add backlight enable pin and backlight power supply for pwm-backlight. Also add bridge phandle needed by dp to enable display on snow. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
parent
132fd5be70
commit
a98c3c2386
@ -9,6 +9,7 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "exynos5250.dtsi"
|
||||
|
||||
/ {
|
||||
@ -194,7 +195,7 @@
|
||||
dcdc3 {
|
||||
ti,enable-ext-control;
|
||||
};
|
||||
fet1 {
|
||||
fet1: fet1 {
|
||||
regulator-name = "vcd_led";
|
||||
ti,overcurrent-wait = <3>;
|
||||
};
|
||||
@ -217,7 +218,7 @@
|
||||
regulator-always-on;
|
||||
ti,overcurrent-wait = <3>;
|
||||
};
|
||||
fet6 {
|
||||
fet6: fet6 {
|
||||
regulator-name = "lcd_vdd";
|
||||
ti,overcurrent-wait = <3>;
|
||||
};
|
||||
@ -246,6 +247,15 @@
|
||||
pinctrl-0 = <&max98095_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
ptn3460: lvds-bridge@20 {
|
||||
compatible = "nxp,ptn3460";
|
||||
reg = <0x20>;
|
||||
powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
|
||||
edid-emulation = <5>;
|
||||
panel = <&panel>;
|
||||
};
|
||||
};
|
||||
|
||||
i2s0: i2s@03830000 {
|
||||
@ -298,11 +308,13 @@
|
||||
vdd_pll-supply = <&ldo8_reg>;
|
||||
};
|
||||
|
||||
backlight {
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 1000000 0>;
|
||||
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
|
||||
default-brightness-level = <7>;
|
||||
enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
|
||||
power-supply = <&fet1>;
|
||||
pinctrl-0 = <&pwm0_out>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
@ -312,6 +324,12 @@
|
||||
samsung,invert-vclk;
|
||||
};
|
||||
|
||||
panel: panel {
|
||||
compatible = "auo,b116xw03";
|
||||
power-supply = <&fet6>;
|
||||
backlight = <&backlight>;
|
||||
};
|
||||
|
||||
dp-controller@145B0000 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
@ -323,22 +341,7 @@
|
||||
samsung,link-rate = <0x0a>;
|
||||
samsung,lane-count = <2>;
|
||||
samsung,hpd-gpio = <&gpx0 7 0>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing1>;
|
||||
|
||||
timing1: timing@1 {
|
||||
clock-frequency = <70589280>;
|
||||
hactive = <1366>;
|
||||
vactive = <768>;
|
||||
hfront-porch = <40>;
|
||||
hback-porch = <40>;
|
||||
hsync-len = <32>;
|
||||
vback-porch = <10>;
|
||||
vfront-porch = <12>;
|
||||
vsync-len = <6>;
|
||||
};
|
||||
};
|
||||
bridge = <&ptn3460>;
|
||||
};
|
||||
};
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user