forked from Minki/linux
[ALSA] cmipci: update register definitions
Update comments for many register symbols, add some new register symbols, and rename a few ones. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
This commit is contained in:
Clemens Ladisch
Jaroslav Kysela
parent
6935e68877
commit
a839a33d85
@ -95,30 +95,34 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address.");
|
||||
#define CM_CHADC0 0x00000001 /* ch0, 0:playback, 1:record */
|
||||
|
||||
#define CM_REG_FUNCTRL1 0x04
|
||||
#define CM_ASFC_MASK 0x0000E000 /* ADC sampling frequency */
|
||||
#define CM_ASFC_SHIFT 13
|
||||
#define CM_DSFC_MASK 0x00001C00 /* DAC sampling frequency */
|
||||
#define CM_DSFC_SHIFT 10
|
||||
#define CM_DSFC_MASK 0x0000E000 /* channel 1 (DAC?) sampling frequency */
|
||||
#define CM_DSFC_SHIFT 13
|
||||
#define CM_ASFC_MASK 0x00001C00 /* channel 0 (ADC?) sampling frequency */
|
||||
#define CM_ASFC_SHIFT 10
|
||||
#define CM_SPDF_1 0x00000200 /* SPDIF IN/OUT at channel B */
|
||||
#define CM_SPDF_0 0x00000100 /* SPDIF OUT only channel A */
|
||||
#define CM_SPDFLOOP 0x00000080 /* ext. SPDIIF/OUT -> IN loopback */
|
||||
#define CM_SPDFLOOP 0x00000080 /* ext. SPDIIF/IN -> OUT loopback */
|
||||
#define CM_SPDO2DAC 0x00000040 /* SPDIF/OUT can be heard from internal DAC */
|
||||
#define CM_INTRM 0x00000020 /* master control block (MCB) interrupt enabled */
|
||||
#define CM_BREQ 0x00000010 /* bus master enabled */
|
||||
#define CM_VOICE_EN 0x00000008 /* legacy voice (SB16,FM) */
|
||||
#define CM_UART_EN 0x00000004 /* UART */
|
||||
#define CM_JYSTK_EN 0x00000002 /* joy stick */
|
||||
#define CM_UART_EN 0x00000004 /* legacy UART */
|
||||
#define CM_JYSTK_EN 0x00000002 /* legacy joystick */
|
||||
#define CM_ZVPORT 0x00000001 /* ZVPORT */
|
||||
|
||||
#define CM_REG_CHFORMAT 0x08
|
||||
|
||||
#define CM_CHB3D5C 0x80000000 /* 5,6 channels */
|
||||
#define CM_FMOFFSET2 0x40000000 /* initial FM PCM offset 2 when Fmute=1 */
|
||||
#define CM_CHB3D 0x20000000 /* 4 channels */
|
||||
|
||||
#define CM_CHIP_MASK1 0x1f000000
|
||||
#define CM_CHIP_037 0x01000000
|
||||
|
||||
#define CM_SPDIF_SELECT1 0x00080000 /* for model <= 037 ? */
|
||||
#define CM_SETLAT48 0x00800000 /* set latency timer 48h */
|
||||
#define CM_EDGEIRQ 0x00400000 /* emulated edge trigger legacy IRQ */
|
||||
#define CM_SPD24SEL39 0x00200000 /* 24-bit spdif: model 039 */
|
||||
#define CM_AC3EN1 0x00100000 /* enable AC3: model 037 */
|
||||
#define CM_SPDIF_SELECT1 0x00080000 /* for model <= 037 ? */
|
||||
#define CM_SPD24SEL 0x00020000 /* 24bit spdif: model 037 */
|
||||
/* #define CM_SPDIF_INVERSE 0x00010000 */ /* ??? */
|
||||
|
||||
@ -128,12 +132,18 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address.");
|
||||
#define CM_ADCBITLEN_14 0x00008000
|
||||
#define CM_ADCBITLEN_13 0x0000C000
|
||||
|
||||
#define CM_ADCDACLEN_MASK 0x00003000
|
||||
#define CM_ADCDACLEN_MASK 0x00003000 /* model 037 */
|
||||
#define CM_ADCDACLEN_060 0x00000000
|
||||
#define CM_ADCDACLEN_066 0x00001000
|
||||
#define CM_ADCDACLEN_130 0x00002000
|
||||
#define CM_ADCDACLEN_280 0x00003000
|
||||
|
||||
#define CM_ADCDLEN_MASK 0x00003000 /* model 039 */
|
||||
#define CM_ADCDLEN_ORIGINAL 0x00000000
|
||||
#define CM_ADCDLEN_EXTRA 0x00001000
|
||||
#define CM_ADCDLEN_24K 0x00002000
|
||||
#define CM_ADCDLEN_WEIGHT 0x00003000
|
||||
|
||||
#define CM_CH1_SRATE_176K 0x00000800
|
||||
#define CM_CH1_SRATE_96K 0x00000800 /* model 055? */
|
||||
#define CM_CH1_SRATE_88K 0x00000400
|
||||
@ -142,24 +152,25 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address.");
|
||||
#define CM_CH0_SRATE_88K 0x00000100
|
||||
|
||||
#define CM_SPDIF_INVERSE2 0x00000080 /* model 055? */
|
||||
#define CM_DBLSPDS 0x00000040
|
||||
#define CM_DBLSPDS 0x00000040 /* double SPDIF sample rate 88.2/96 */
|
||||
#define CM_POLVALID 0x00000020 /* inverse SPDIF/IN valid bit */
|
||||
#define CM_SPDLOCKED 0x00000010
|
||||
|
||||
#define CM_CH1FMT_MASK 0x0000000C
|
||||
#define CM_CH1FMT_MASK 0x0000000C /* bit 3: 16 bits, bit 2: stereo */
|
||||
#define CM_CH1FMT_SHIFT 2
|
||||
#define CM_CH0FMT_MASK 0x00000003
|
||||
#define CM_CH0FMT_MASK 0x00000003 /* bit 1: 16 bits, bit 0: stereo */
|
||||
#define CM_CH0FMT_SHIFT 0
|
||||
|
||||
#define CM_REG_INT_HLDCLR 0x0C
|
||||
#define CM_CHIP_MASK2 0xff000000
|
||||
#define CM_CHIP_8768 0x20000000
|
||||
#define CM_CHIP_055 0x08000000
|
||||
#define CM_CHIP_039 0x04000000
|
||||
#define CM_CHIP_039_6CH 0x01000000
|
||||
#define CM_CHIP_055 0x08000000
|
||||
#define CM_CHIP_8768 0x20000000
|
||||
#define CM_UNKNOWN_INT_EN 0x00080000 /* ? */
|
||||
#define CM_TDMA_INT_EN 0x00040000
|
||||
#define CM_CH1_INT_EN 0x00020000
|
||||
#define CM_CH0_INT_EN 0x00010000
|
||||
#define CM_INT_HOLD 0x00000002
|
||||
#define CM_INT_CLEAR 0x00000001
|
||||
|
||||
#define CM_REG_INT_STATUS 0x10
|
||||
#define CM_INTR 0x80000000
|
||||
@ -178,12 +189,13 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address.");
|
||||
#define CM_CHINT0 0x00000001
|
||||
|
||||
#define CM_REG_LEGACY_CTRL 0x14
|
||||
#define CM_NXCHG 0x80000000 /* h/w multi channels? */
|
||||
#define CM_NXCHG 0x80000000 /* don't map base reg dword->sample */
|
||||
#define CM_VMPU_MASK 0x60000000 /* MPU401 i/o port address */
|
||||
#define CM_VMPU_330 0x00000000
|
||||
#define CM_VMPU_320 0x20000000
|
||||
#define CM_VMPU_310 0x40000000
|
||||
#define CM_VMPU_300 0x60000000
|
||||
#define CM_ENWR8237 0x10000000 /* enable bus master to write 8237 base reg */
|
||||
#define CM_VSBSEL_MASK 0x0C000000 /* SB16 base address */
|
||||
#define CM_VSBSEL_220 0x00000000
|
||||
#define CM_VSBSEL_240 0x04000000
|
||||
@ -194,44 +206,74 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address.");
|
||||
#define CM_FMSEL_3C8 0x01000000
|
||||
#define CM_FMSEL_3E0 0x02000000
|
||||
#define CM_FMSEL_3E8 0x03000000
|
||||
#define CM_ENSPDOUT 0x00800000 /* enable XPDIF/OUT to I/O interface */
|
||||
#define CM_SPDCOPYRHT 0x00400000 /* set copyright spdif in/out */
|
||||
#define CM_ENSPDOUT 0x00800000 /* enable XSPDIF/OUT to I/O interface */
|
||||
#define CM_SPDCOPYRHT 0x00400000 /* spdif in/out copyright bit */
|
||||
#define CM_DAC2SPDO 0x00200000 /* enable wave+fm_midi -> SPDIF/OUT */
|
||||
#define CM_SETRETRY 0x00010000 /* 0: legacy i/o wait (default), 1: legacy i/o bus retry */
|
||||
#define CM_INVIDWEN 0x00100000 /* internal vendor ID write enable, model 039? */
|
||||
#define CM_SETRETRY 0x00100000 /* 0: legacy i/o wait (default), 1: legacy i/o bus retry */
|
||||
#define CM_C_EEACCESS 0x00080000 /* direct programming eeprom regs */
|
||||
#define CM_C_EECS 0x00040000
|
||||
#define CM_C_EEDI46 0x00020000
|
||||
#define CM_C_EECK46 0x00010000
|
||||
#define CM_CHB3D6C 0x00008000 /* 5.1 channels support */
|
||||
#define CM_LINE_AS_BASS 0x00006000 /* use line-in as bass */
|
||||
#define CM_CENTR2LIN 0x00004000 /* line-in as center out */
|
||||
#define CM_BASE2LIN 0x00002000 /* line-in as bass out */
|
||||
#define CM_EXBASEN 0x00001000 /* external bass input enable */
|
||||
|
||||
#define CM_REG_MISC_CTRL 0x18
|
||||
#define CM_PWD 0x80000000
|
||||
#define CM_PWD 0x80000000 /* power down */
|
||||
#define CM_RESET 0x40000000
|
||||
#define CM_SFIL_MASK 0x30000000
|
||||
#define CM_TXVX 0x08000000
|
||||
#define CM_N4SPK3D 0x04000000 /* 4ch output */
|
||||
#define CM_SFIL_MASK 0x30000000 /* filter control at front end DAC, model 037? */
|
||||
#define CM_VMGAIN 0x10000000 /* analog master amp +6dB, model 039? */
|
||||
#define CM_TXVX 0x08000000 /* model 037? */
|
||||
#define CM_N4SPK3D 0x04000000 /* copy front to rear */
|
||||
#define CM_SPDO5V 0x02000000 /* 5V spdif output (1 = 0.5v (coax)) */
|
||||
#define CM_SPDIF48K 0x01000000 /* write */
|
||||
#define CM_SPATUS48K 0x01000000 /* read */
|
||||
#define CM_ENDBDAC 0x00800000 /* enable dual dac */
|
||||
#define CM_ENDBDAC 0x00800000 /* enable double dac */
|
||||
#define CM_XCHGDAC 0x00400000 /* 0: front=ch0, 1: front=ch1 */
|
||||
#define CM_SPD32SEL 0x00200000 /* 0: 16bit SPDIF, 1: 32bit */
|
||||
#define CM_SPDFLOOPI 0x00100000 /* int. SPDIF-IN -> int. OUT */
|
||||
#define CM_FM_EN 0x00080000 /* enalbe FM */
|
||||
#define CM_SPDFLOOPI 0x00100000 /* int. SPDIF-OUT -> int. IN */
|
||||
#define CM_FM_EN 0x00080000 /* enable legacy FM */
|
||||
#define CM_AC3EN2 0x00040000 /* enable AC3: model 039 */
|
||||
#define CM_VIDWPDSB 0x00010000
|
||||
#define CM_ENWRASID 0x00010000 /* choose writable internal SUBID (audio) */
|
||||
#define CM_VIDWPDSB 0x00010000 /* model 037? */
|
||||
#define CM_SPDF_AC97 0x00008000 /* 0: SPDIF/OUT 44.1K, 1: 48K */
|
||||
#define CM_MASK_EN 0x00004000
|
||||
#define CM_VIDWPPRT 0x00002000
|
||||
#define CM_SFILENB 0x00001000
|
||||
#define CM_MMODE_MASK 0x00000E00
|
||||
#define CM_MASK_EN 0x00004000 /* activate channel mask on legacy DMA */
|
||||
#define CM_ENWRMSID 0x00002000 /* choose writable internal SUBID (modem) */
|
||||
#define CM_VIDWPPRT 0x00002000 /* model 037? */
|
||||
#define CM_SFILENB 0x00001000 /* filter stepping at front end DAC, model 037? */
|
||||
#define CM_MMODE_MASK 0x00000E00 /* model DAA interface mode */
|
||||
#define CM_SPDIF_SELECT2 0x00000100 /* for model > 039 ? */
|
||||
#define CM_ENCENTER 0x00000080
|
||||
#define CM_FLINKON 0x00000040
|
||||
#define CM_FLINKOFF 0x00000020
|
||||
#define CM_MIDSMP 0x00000010
|
||||
#define CM_UPDDMA_MASK 0x0000000C
|
||||
#define CM_TWAIT_MASK 0x00000003
|
||||
#define CM_FLINKON 0x00000080 /* force modem link detection on, model 037 */
|
||||
#define CM_MUTECH1 0x00000040 /* mute PCI ch1 to DAC */
|
||||
#define CM_FLINKOFF 0x00000040 /* force modem link detection off, model 037 */
|
||||
#define CM_UNKNOWN_18_5 0x00000020 /* ? */
|
||||
#define CM_MIDSMP 0x00000010 /* 1/2 interpolation at front end DAC */
|
||||
#define CM_UPDDMA_MASK 0x0000000C /* TDMA position update notification */
|
||||
#define CM_UPDDMA_2048 0x00000000
|
||||
#define CM_UPDDMA_1024 0x00000004
|
||||
#define CM_UPDDMA_512 0x00000008
|
||||
#define CM_UPDDMA_256 0x0000000C
|
||||
#define CM_TWAIT_MASK 0x00000003 /* model 037 */
|
||||
#define CM_TWAIT1 0x00000002 /* FM i/o cycle, 0: 48, 1: 64 PCICLKs */
|
||||
#define CM_TWAIT0 0x00000001 /* i/o cycle, 0: 4, 1: 6 PCICLKs */
|
||||
|
||||
#define CM_REG_TDMA_POSITION 0x1C
|
||||
#define CM_TDMA_CNT_MASK 0xFFFF0000 /* current byte/word count */
|
||||
#define CM_TDMA_ADR_MASK 0x0000FFFF /* current address */
|
||||
|
||||
/* byte */
|
||||
#define CM_REG_MIXER0 0x20
|
||||
#define CM_REG_SBVR 0x20 /* write: sb16 version */
|
||||
#define CM_REG_DEV 0x20 /* read: hardware device version */
|
||||
|
||||
#define CM_REG_MIXER21 0x21
|
||||
#define CM_UNKNOWN_21_MASK 0x78 /* ? */
|
||||
#define CM_X_ADPCM 0x04 /* SB16 ADPCM enable */
|
||||
#define CM_PROINV 0x02 /* SBPro left/right channel switching */
|
||||
#define CM_X_SB16 0x01 /* SB16 compatible */
|
||||
|
||||
#define CM_REG_SB16_DATA 0x22
|
||||
#define CM_REG_SB16_ADDR 0x23
|
||||
@ -246,8 +288,8 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address.");
|
||||
#define CM_FMMUTE_SHIFT 7
|
||||
#define CM_WSMUTE 0x40 /* mute PCM */
|
||||
#define CM_WSMUTE_SHIFT 6
|
||||
#define CM_SPK4 0x20 /* lin-in -> rear line out */
|
||||
#define CM_SPK4_SHIFT 5
|
||||
#define CM_REAR2LIN 0x20 /* lin-in -> rear line out */
|
||||
#define CM_REAR2LIN_SHIFT 5
|
||||
#define CM_REAR2FRONT 0x10 /* exchange rear/front */
|
||||
#define CM_REAR2FRONT_SHIFT 4
|
||||
#define CM_WAVEINL 0x08 /* digital wave rec. left chan */
|
||||
@ -279,12 +321,13 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address.");
|
||||
#define CM_VAUXR_MASK 0x0f
|
||||
|
||||
#define CM_REG_MISC 0x27
|
||||
#define CM_UNKNOWN_27_MASK 0xd8 /* ? */
|
||||
#define CM_XGPO1 0x20
|
||||
// #define CM_XGPBIO 0x04
|
||||
#define CM_MIC_CENTER_LFE 0x04 /* mic as center/lfe out? (model 039 or later?) */
|
||||
#define CM_SPDIF_INVERSE 0x04 /* spdif input phase inverse (model 037) */
|
||||
#define CM_SPDVALID 0x02 /* spdif input valid check */
|
||||
#define CM_DMAUTO 0x01
|
||||
#define CM_DMAUTO 0x01 /* SB16 DMA auto detect */
|
||||
|
||||
#define CM_REG_AC97 0x28 /* hmmm.. do we have ac97 link? */
|
||||
/*
|
||||
@ -325,18 +368,20 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address.");
|
||||
/*
|
||||
* extended registers
|
||||
*/
|
||||
#define CM_REG_CH0_FRAME1 0x80 /* base address */
|
||||
#define CM_REG_CH0_FRAME2 0x84
|
||||
#define CM_REG_CH0_FRAME1 0x80 /* write: base address */
|
||||
#define CM_REG_CH0_FRAME2 0x84 /* read: current address */
|
||||
#define CM_REG_CH1_FRAME1 0x88 /* 0-15: count of samples at bus master; buffer size */
|
||||
#define CM_REG_CH1_FRAME2 0x8C /* 16-31: count of samples at codec; fragment size */
|
||||
|
||||
#define CM_REG_EXT_MISC 0x90
|
||||
#define CM_REG_MISC_CTRL_8768 0x92 /* reg. name the same as 0x18 */
|
||||
#define CM_CHB3D8C 0x20 /* 7.1 channels support */
|
||||
#define CM_SPD32FMT 0x10 /* SPDIF/IN 32k */
|
||||
#define CM_ADC2SPDIF 0x08 /* ADC output to SPDIF/OUT */
|
||||
#define CM_SHAREADC 0x04 /* DAC in ADC as Center/LFE */
|
||||
#define CM_REALTCMP 0x02 /* monitor the CMPL/CMPR of ADC */
|
||||
#define CM_INVLRCK 0x01 /* invert ZVPORT's LRCK */
|
||||
#define CM_ADC48K44K 0x10000000 /* ADC parameters group, 0: 44k, 1: 48k */
|
||||
#define CM_CHB3D8C 0x00200000 /* 7.1 channels support */
|
||||
#define CM_SPD32FMT 0x00100000 /* SPDIF/IN 32k sample rate */
|
||||
#define CM_ADC2SPDIF 0x00080000 /* ADC output to SPDIF/OUT */
|
||||
#define CM_SHAREADC 0x00040000 /* DAC in ADC as Center/LFE */
|
||||
#define CM_REALTCMP 0x00020000 /* monitor the CMPL/CMPR of ADC */
|
||||
#define CM_INVLRCK 0x00010000 /* invert ZVPORT's LRCK */
|
||||
#define CM_UNKNOWN_90_MASK 0x0000FFFF /* ? */
|
||||
|
||||
/*
|
||||
* size of i/o region
|
||||
@ -717,9 +762,9 @@ static int set_dac_channels(struct cmipci *cm, struct cmipci_pcm *rec, int chann
|
||||
}
|
||||
if (cm->chip_version == 68) {
|
||||
if (channels == 8) {
|
||||
snd_cmipci_set_bit(cm, CM_REG_MISC_CTRL_8768, CM_CHB3D8C);
|
||||
snd_cmipci_set_bit(cm, CM_REG_EXT_MISC, CM_CHB3D8C);
|
||||
} else {
|
||||
snd_cmipci_clear_bit(cm, CM_REG_MISC_CTRL_8768, CM_CHB3D8C);
|
||||
snd_cmipci_clear_bit(cm, CM_REG_EXT_MISC, CM_CHB3D8C);
|
||||
}
|
||||
}
|
||||
spin_unlock_irq(&cm->reg_lock);
|
||||
@ -797,11 +842,11 @@ static int snd_cmipci_pcm_prepare(struct cmipci *cm, struct cmipci_pcm *rec,
|
||||
freq = snd_cmipci_rate_freq(runtime->rate);
|
||||
val = snd_cmipci_read(cm, CM_REG_FUNCTRL1);
|
||||
if (rec->ch) {
|
||||
val &= ~CM_ASFC_MASK;
|
||||
val |= (freq << CM_ASFC_SHIFT) & CM_ASFC_MASK;
|
||||
} else {
|
||||
val &= ~CM_DSFC_MASK;
|
||||
val |= (freq << CM_DSFC_SHIFT) & CM_DSFC_MASK;
|
||||
} else {
|
||||
val &= ~CM_ASFC_MASK;
|
||||
val |= (freq << CM_ASFC_SHIFT) & CM_ASFC_MASK;
|
||||
}
|
||||
snd_cmipci_write(cm, CM_REG_FUNCTRL1, val);
|
||||
//snd_printd("cmipci: functrl1 = %08x\n", val);
|
||||
@ -2284,8 +2329,8 @@ DEFINE_SWITCH_ARG(exchange_dac, CM_REG_MISC_CTRL, CM_XCHGDAC, 0, 0, 0); /* rever
|
||||
DEFINE_SWITCH_ARG(exchange_dac, CM_REG_MISC_CTRL, CM_XCHGDAC, CM_XCHGDAC, 0, 0);
|
||||
#endif
|
||||
DEFINE_BIT_SWITCH_ARG(fourch, CM_REG_MISC_CTRL, CM_N4SPK3D, 0, 0);
|
||||
// DEFINE_BIT_SWITCH_ARG(line_rear, CM_REG_MIXER1, CM_SPK4, 1, 0);
|
||||
// DEFINE_BIT_SWITCH_ARG(line_bass, CM_REG_LEGACY_CTRL, CM_LINE_AS_BASS, 0, 0);
|
||||
// DEFINE_BIT_SWITCH_ARG(line_rear, CM_REG_MIXER1, CM_REAR2LIN, 1, 0);
|
||||
// DEFINE_BIT_SWITCH_ARG(line_bass, CM_REG_LEGACY_CTRL, CM_CENTR2LIN|CM_BASE2LIN, 0, 0);
|
||||
// DEFINE_BIT_SWITCH_ARG(joystick, CM_REG_FUNCTRL1, CM_JYSTK_EN, 0, 0); /* now module option */
|
||||
DEFINE_SWITCH_ARG(modem, CM_REG_MISC_CTRL, CM_FLINKON|CM_FLINKOFF, CM_FLINKON, 0, 0);
|
||||
|
||||
@ -2355,11 +2400,11 @@ static inline unsigned int get_line_in_mode(struct cmipci *cm)
|
||||
unsigned int val;
|
||||
if (cm->chip_version >= 39) {
|
||||
val = snd_cmipci_read(cm, CM_REG_LEGACY_CTRL);
|
||||
if (val & CM_LINE_AS_BASS)
|
||||
if (val & (CM_CENTR2LIN | CM_BASE2LIN))
|
||||
return 2;
|
||||
}
|
||||
val = snd_cmipci_read_b(cm, CM_REG_MIXER1);
|
||||
if (val & CM_SPK4)
|
||||
if (val & CM_REAR2LIN)
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
@ -2383,13 +2428,13 @@ static int snd_cmipci_line_in_mode_put(struct snd_kcontrol *kcontrol,
|
||||
|
||||
spin_lock_irq(&cm->reg_lock);
|
||||
if (ucontrol->value.enumerated.item[0] == 2)
|
||||
change = snd_cmipci_set_bit(cm, CM_REG_LEGACY_CTRL, CM_LINE_AS_BASS);
|
||||
change = snd_cmipci_set_bit(cm, CM_REG_LEGACY_CTRL, CM_CENTR2LIN | CM_BASE2LIN);
|
||||
else
|
||||
change = snd_cmipci_clear_bit(cm, CM_REG_LEGACY_CTRL, CM_LINE_AS_BASS);
|
||||
change = snd_cmipci_clear_bit(cm, CM_REG_LEGACY_CTRL, CM_CENTR2LIN | CM_BASE2LIN);
|
||||
if (ucontrol->value.enumerated.item[0] == 1)
|
||||
change |= snd_cmipci_set_bit_b(cm, CM_REG_MIXER1, CM_SPK4);
|
||||
change |= snd_cmipci_set_bit_b(cm, CM_REG_MIXER1, CM_REAR2LIN);
|
||||
else
|
||||
change |= snd_cmipci_clear_bit_b(cm, CM_REG_MIXER1, CM_SPK4);
|
||||
change |= snd_cmipci_clear_bit_b(cm, CM_REG_MIXER1, CM_REAR2LIN);
|
||||
spin_unlock_irq(&cm->reg_lock);
|
||||
return change;
|
||||
}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user