leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[media] omap3isp: Configure CSI-2 phy based on platform data

Browse Source 
Configure CSI-2 phy based on platform data in the ISP driver. For that, the
new V4L2_CID_IMAGE_SOURCE_PIXEL_RATE control is used. Previously the same
was configured from the board code.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Sakari Ailus 2012-10-14 07:31:50 -03:00 committed by Mauro Carvalho Chehab
parent ec51e960bc
commit a7b2106136
3 changed files with 84 additions and 84 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
drivers/media/platform/omap3isp/isp.h
View File

@ -129,9 +129,6 @@ struct isp_reg {
struct isp_platform_callback {
u32 (*set_xclk)(struct isp_device *isp, u32 xclk, u8 xclksel);
int (*csiphy_config)(struct isp_csiphy *phy,
struct isp_csiphy_dphy_cfg *dphy,
struct isp_csiphy_lanes_cfg *lanes);
};
/*

155
drivers/media/platform/omap3isp/ispcsiphy.c
View File

@ -120,36 +120,6 @@ static void csiphy_routing_cfg(struct isp_csiphy *phy, u32 iface, bool on,
return csiphy_routing_cfg_3430(phy, iface, on, ccp2_strobe);
}
/*
* csiphy_lanes_config - Configuration of CSIPHY lanes.
*
* Updates HW configuration.
* Called with phy->mutex taken.
*/
static void csiphy_lanes_config(struct isp_csiphy *phy)
{
unsigned int i;
u32 reg;
reg = isp_reg_readl(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG);
for (i = 0; i < phy->num_data_lanes; i++) {
reg &= ~(ISPCSI2_PHY_CFG_DATA_POL_MASK(i + 1) |
ISPCSI2_PHY_CFG_DATA_POSITION_MASK(i + 1));
reg |= (phy->lanes.data[i].pol <<
ISPCSI2_PHY_CFG_DATA_POL_SHIFT(i + 1));
reg |= (phy->lanes.data[i].pos <<
ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(i + 1));
}
reg &= ~(ISPCSI2_PHY_CFG_CLOCK_POL_MASK |
ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK);
reg |= phy->lanes.clk.pol << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT;
reg |= phy->lanes.clk.pos << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT;
isp_reg_writel(phy->isp, reg, phy->cfg_regs, ISPCSI2_PHY_CFG);
}
/*
* csiphy_power_autoswitch_enable
* @enable: Sets or clears the autoswitch function enable flag.
@ -195,43 +165,28 @@ static int csiphy_set_power(struct isp_csiphy *phy, u32 power)
}
/*
* csiphy_dphy_config - Configure CSI2 D-PHY parameters.
*
* Called with phy->mutex taken.
* TCLK values are OK at their reset values
*/
static void csiphy_dphy_config(struct isp_csiphy *phy)
{
u32 reg;
/* Set up ISPCSIPHY_REG0 */
reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG0);
reg &= ~(ISPCSIPHY_REG0_THS_TERM_MASK |
ISPCSIPHY_REG0_THS_SETTLE_MASK);
reg |= phy->dphy.ths_term << ISPCSIPHY_REG0_THS_TERM_SHIFT;
reg |= phy->dphy.ths_settle << ISPCSIPHY_REG0_THS_SETTLE_SHIFT;
isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG0);
/* Set up ISPCSIPHY_REG1 */
reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG1);
reg &= ~(ISPCSIPHY_REG1_TCLK_TERM_MASK |
ISPCSIPHY_REG1_TCLK_MISS_MASK |
ISPCSIPHY_REG1_TCLK_SETTLE_MASK);
reg |= phy->dphy.tclk_term << ISPCSIPHY_REG1_TCLK_TERM_SHIFT;
reg |= phy->dphy.tclk_miss << ISPCSIPHY_REG1_TCLK_MISS_SHIFT;
reg |= phy->dphy.tclk_settle << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT;
isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG1);
}
static int csiphy_config(struct isp_csiphy *phy,
struct isp_csiphy_dphy_cfg *dphy,
struct isp_csiphy_lanes_cfg *lanes)
#define TCLK_TERM 0
#define TCLK_MISS 1
#define TCLK_SETTLE 14
static int omap3isp_csiphy_config(struct isp_csiphy *phy)
{
struct isp_csi2_device *csi2 = phy->csi2;
struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity);
struct isp_v4l2_subdevs_group *subdevs = pipe->external->host_priv;
struct isp_csiphy_lanes_cfg *lanes;
int csi2_ddrclk_khz;
unsigned int used_lanes = 0;
unsigned int i;
u32 reg;
if (subdevs->interface == ISP_INTERFACE_CCP2B_PHY1
|| subdevs->interface == ISP_INTERFACE_CCP2B_PHY2)
lanes = &subdevs->bus.ccp2.lanecfg;
else
lanes = &subdevs->bus.csi2.lanecfg;
/* Clock and data lanes verification */
for (i = 0; i < phy->num_data_lanes; i++) {
@ -250,10 +205,61 @@ static int csiphy_config(struct isp_csiphy *phy,
if (lanes->clk.pos == 0 || used_lanes & (1 << lanes->clk.pos))
return -EINVAL;
mutex_lock(&phy->mutex);
phy->dphy = *dphy;
phy->lanes = *lanes;
mutex_unlock(&phy->mutex);
/*
* The PHY configuration is lost in off mode, that's not an
* issue since the MPU power domain is forced on whilst the
* ISP is in use.
*/
csiphy_routing_cfg(phy, subdevs->interface, true,
subdevs->bus.ccp2.phy_layer);
/* DPHY timing configuration */
/* CSI-2 is DDR and we only count used lanes. */
csi2_ddrclk_khz = pipe->external_rate / 1000
/ (2 * hweight32(used_lanes)) * pipe->external_width;
reg = isp_reg_readl(csi2->isp, phy->phy_regs, ISPCSIPHY_REG0);
reg &= ~(ISPCSIPHY_REG0_THS_TERM_MASK |
ISPCSIPHY_REG0_THS_SETTLE_MASK);
/* THS_TERM: Programmed value = ceil(12.5 ns/DDRClk period) - 1. */
reg |= (DIV_ROUND_UP(25 * csi2_ddrclk_khz, 2000000) - 1)
<< ISPCSIPHY_REG0_THS_TERM_SHIFT;
/* THS_SETTLE: Programmed value = ceil(90 ns/DDRClk period) + 3. */
reg |= (DIV_ROUND_UP(90 * csi2_ddrclk_khz, 1000000) + 3)
<< ISPCSIPHY_REG0_THS_SETTLE_SHIFT;
isp_reg_writel(csi2->isp, reg, phy->phy_regs, ISPCSIPHY_REG0);
reg = isp_reg_readl(csi2->isp, phy->phy_regs, ISPCSIPHY_REG1);
reg &= ~(ISPCSIPHY_REG1_TCLK_TERM_MASK |
ISPCSIPHY_REG1_TCLK_MISS_MASK |
ISPCSIPHY_REG1_TCLK_SETTLE_MASK);
reg |= TCLK_TERM << ISPCSIPHY_REG1_TCLK_TERM_SHIFT;
reg |= TCLK_MISS << ISPCSIPHY_REG1_TCLK_MISS_SHIFT;
reg |= TCLK_SETTLE << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT;
isp_reg_writel(csi2->isp, reg, phy->phy_regs, ISPCSIPHY_REG1);
/* DPHY lane configuration */
reg = isp_reg_readl(csi2->isp, phy->cfg_regs, ISPCSI2_PHY_CFG);
for (i = 0; i < phy->num_data_lanes; i++) {
reg &= ~(ISPCSI2_PHY_CFG_DATA_POL_MASK(i + 1) |
ISPCSI2_PHY_CFG_DATA_POSITION_MASK(i + 1));
reg |= (lanes->data[i].pol <<
ISPCSI2_PHY_CFG_DATA_POL_SHIFT(i + 1));
reg |= (lanes->data[i].pos <<
ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(i + 1));
}
reg &= ~(ISPCSI2_PHY_CFG_CLOCK_POL_MASK |
ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK);
reg |= lanes->clk.pol << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT;
reg |= lanes->clk.pos << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT;
isp_reg_writel(csi2->isp, reg, phy->cfg_regs, ISPCSI2_PHY_CFG);
return 0;
}
@ -278,8 +284,9 @@ int omap3isp_csiphy_acquire(struct isp_csiphy *phy)
if (rval < 0)
goto done;
csiphy_dphy_config(phy);
csiphy_lanes_config(phy);
rval = omap3isp_csiphy_config(phy);
if (rval < 0)
goto done;
rval = csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_ON);
if (rval) {
@ -299,6 +306,14 @@ void omap3isp_csiphy_release(struct isp_csiphy *phy)
{
mutex_lock(&phy->mutex);
if (phy->phy_in_use) {
struct isp_csi2_device *csi2 = phy->csi2;
struct isp_pipeline *pipe =
to_isp_pipeline(&csi2->subdev.entity);
struct isp_v4l2_subdevs_group *subdevs =
pipe->external->host_priv;
csiphy_routing_cfg(phy, subdevs->interface, false,
subdevs->bus.ccp2.phy_layer);
csiphy_power_autoswitch_enable(phy, false);
csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_OFF);
regulator_disable(phy->vdd);
@ -315,8 +330,6 @@ int omap3isp_csiphy_init(struct isp_device *isp)
struct isp_csiphy *phy1 = &isp->isp_csiphy1;
struct isp_csiphy *phy2 = &isp->isp_csiphy2;
isp->platform_cb.csiphy_config = csiphy_config;
phy2->isp = isp;
phy2->csi2 = &isp->isp_csi2a;
phy2->num_data_lanes = ISP_CSIPHY2_NUM_DATA_LANES;

10
drivers/media/platform/omap3isp/ispcsiphy.h
View File

@ -32,14 +32,6 @@
struct isp_csi2_device;
struct regulator;
struct isp_csiphy_dphy_cfg {
u8 ths_term;
u8 ths_settle;
u8 tclk_term;
unsigned tclk_miss:1;
u8 tclk_settle;
};
struct isp_csiphy {
struct isp_device *isp;
struct mutex mutex; /* serialize csiphy configuration */
@ -52,8 +44,6 @@ struct isp_csiphy {
unsigned int phy_regs;
u8 num_data_lanes; /* number of CSI2 Data Lanes supported */
struct isp_csiphy_lanes_cfg lanes;
struct isp_csiphy_dphy_cfg dphy;
};
int omap3isp_csiphy_acquire(struct isp_csiphy *phy);