forked from Minki/linux
[media] doc-rst: start adding documentation for cx2341x
move the contents of fw-decoder-api.txt to cx2341x and convert it to ReST file, adding it to media/v4l-drivers Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Mauro Carvalho Chehab
parent
d197a370d8
commit
a785ddb868
564
Documentation/media/v4l-drivers/cx2341x.rst
Normal file
564
Documentation/media/v4l-drivers/cx2341x.rst
Normal file
@ -0,0 +1,564 @@
|
||||
The cx2341x driver
|
||||
==================
|
||||
|
||||
Decoder firmware API description
|
||||
--------------------------------
|
||||
|
||||
.. note:: this API is part of the decoder firmware, so it's cx23415 only.
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_PING_FW
|
||||
-------------------
|
||||
|
||||
Enum: 0/0x00
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
This API call does nothing. It may be used to check if the firmware
|
||||
is responding.
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_START_PLAYBACK
|
||||
--------------------------
|
||||
|
||||
Enum: 1/0x01
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Begin or resume playback.
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
0 based frame number in GOP to begin playback from.
|
||||
|
||||
Param[1]
|
||||
~~~~~~~~
|
||||
|
||||
Specifies the number of muted audio frames to play before normal
|
||||
audio resumes. (This is not implemented in the firmware, leave at 0)
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_STOP_PLAYBACK
|
||||
-------------------------
|
||||
|
||||
Enum: 2/0x02
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Ends playback and clears all decoder buffers. If PTS is not zero,
|
||||
playback stops at specified PTS.
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
Display 0=last frame, 1=black
|
||||
|
||||
.. note::
|
||||
|
||||
this takes effect immediately, so if you want to wait for a PTS,
|
||||
then use '0', otherwise the screen goes to black at once.
|
||||
You can call this later (even if there is no playback) with a 1 value
|
||||
to set the screen to black.
|
||||
|
||||
Param[1]
|
||||
~~~~~~~~
|
||||
|
||||
PTS low
|
||||
|
||||
Param[2]
|
||||
~~~~~~~~
|
||||
|
||||
PTS high
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_SET_PLAYBACK_SPEED
|
||||
------------------------------
|
||||
|
||||
Enum: 3/0x03
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Playback stream at speed other than normal. There are two modes of
|
||||
operation:
|
||||
|
||||
- Smooth: host transfers entire stream and firmware drops unused
|
||||
frames.
|
||||
- Coarse: host drops frames based on indexing as required to achieve
|
||||
desired speed.
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
Bitmap:
|
||||
0:7 0 normal
|
||||
1 fast only "1.5 times"
|
||||
n nX fast, 1/nX slow
|
||||
30 Framedrop:
|
||||
'0' during 1.5 times play, every other B frame is dropped
|
||||
'1' during 1.5 times play, stream is unchanged (bitrate
|
||||
must not exceed 8mbps)
|
||||
31 Speed:
|
||||
'0' slow
|
||||
'1' fast
|
||||
|
||||
.. note::
|
||||
|
||||
n is limited to 2. Anything higher does not result in
|
||||
faster playback. Instead the host should start dropping frames.
|
||||
|
||||
Param[1]
|
||||
~~~~~~~~
|
||||
|
||||
Direction: 0=forward, 1=reverse
|
||||
|
||||
.. note::
|
||||
|
||||
to make reverse playback work you have to write full GOPs in
|
||||
reverse order.
|
||||
|
||||
Param[2]
|
||||
~~~~~~~~
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
Picture mask:
|
||||
1=I frames
|
||||
3=I, P frames
|
||||
7=I, P, B frames
|
||||
|
||||
Param[3]
|
||||
~~~~~~~~
|
||||
|
||||
B frames per GOP (for reverse play only)
|
||||
|
||||
.. note::
|
||||
|
||||
for reverse playback the Picture Mask should be set to I or I, P.
|
||||
Adding B frames to the mask will result in corrupt video. This field
|
||||
has to be set to the correct value in order to keep the timing correct.
|
||||
|
||||
Param[4]
|
||||
~~~~~~~~
|
||||
|
||||
Mute audio: 0=disable, 1=enable
|
||||
|
||||
Param[5]
|
||||
~~~~~~~~
|
||||
|
||||
Display 0=frame, 1=field
|
||||
|
||||
Param[6]
|
||||
~~~~~~~~
|
||||
|
||||
Specifies the number of muted audio frames to play before normal audio
|
||||
resumes. (Not implemented in the firmware, leave at 0)
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_STEP_VIDEO
|
||||
----------------------
|
||||
|
||||
Enum: 5/0x05
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Each call to this API steps the playback to the next unit defined below
|
||||
in the current playback direction.
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
0=frame, 1=top field, 2=bottom field
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_SET_DMA_BLOCK_SIZE
|
||||
------------------------------
|
||||
|
||||
Enum: 8/0x08
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Set DMA transfer block size. Counterpart to API 0xC9
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
DMA transfer block size in bytes. A different size may be specified
|
||||
when issuing the DMA transfer command.
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_GET_XFER_INFO
|
||||
-------------------------
|
||||
|
||||
Enum: 9/0x09
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
This API call may be used to detect an end of stream condition.
|
||||
|
||||
Result[0]
|
||||
~~~~~~~~~
|
||||
|
||||
Stream type
|
||||
|
||||
Result[1]
|
||||
~~~~~~~~~
|
||||
|
||||
Address offset
|
||||
|
||||
Result[2]
|
||||
~~~~~~~~~
|
||||
|
||||
Maximum bytes to transfer
|
||||
|
||||
Result[3]
|
||||
~~~~~~~~~
|
||||
|
||||
Buffer fullness
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_GET_DMA_STATUS
|
||||
--------------------------
|
||||
|
||||
Enum: 10/0x0A
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Status of the last DMA transfer
|
||||
|
||||
Result[0]
|
||||
~~~~~~~~~
|
||||
|
||||
Bit 1 set means transfer complete
|
||||
Bit 2 set means DMA error
|
||||
Bit 3 set means linked list error
|
||||
|
||||
Result[1]
|
||||
~~~~~~~~~
|
||||
|
||||
DMA type: 0=MPEG, 1=OSD, 2=YUV
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_SCHED_DMA_FROM_HOST
|
||||
-------------------------------
|
||||
|
||||
Enum: 11/0x0B
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Setup DMA from host operation. Counterpart to API 0xCC
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
Memory address of link list
|
||||
|
||||
Param[1]
|
||||
~~~~~~~~
|
||||
|
||||
Total # of bytes to transfer
|
||||
|
||||
Param[2]
|
||||
~~~~~~~~
|
||||
|
||||
DMA type (0=MPEG, 1=OSD, 2=YUV)
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_PAUSE_PLAYBACK
|
||||
--------------------------
|
||||
|
||||
Enum: 13/0x0D
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Freeze playback immediately. In this mode, when internal buffers are
|
||||
full, no more data will be accepted and data request IRQs will be
|
||||
masked.
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
Display: 0=last frame, 1=black
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_HALT_FW
|
||||
-------------------
|
||||
|
||||
Enum: 14/0x0E
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
The firmware is halted and no further API calls are serviced until
|
||||
the firmware is uploaded again.
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_SET_STANDARD
|
||||
------------------------
|
||||
|
||||
Enum: 16/0x10
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Selects display standard
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
0=NTSC, 1=PAL
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_GET_VERSION
|
||||
-----------------------
|
||||
|
||||
Enum: 17/0x11
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Returns decoder firmware version information
|
||||
|
||||
Result[0]
|
||||
~~~~~~~~~
|
||||
|
||||
Version bitmask:
|
||||
- Bits 0:15 build
|
||||
- Bits 16:23 minor
|
||||
- Bits 24:31 major
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_SET_STREAM_INPUT
|
||||
----------------------------
|
||||
|
||||
Enum: 20/0x14
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Select decoder stream input port
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
0=memory (default), 1=streaming
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_GET_TIMING_INFO
|
||||
---------------------------
|
||||
|
||||
Enum: 21/0x15
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Returns timing information from start of playback
|
||||
|
||||
Result[0]
|
||||
~~~~~~~~~
|
||||
|
||||
Frame count by decode order
|
||||
|
||||
Result[1]
|
||||
~~~~~~~~~
|
||||
|
||||
Video PTS bits 0:31 by display order
|
||||
|
||||
Result[2]
|
||||
~~~~~~~~~
|
||||
|
||||
Video PTS bit 32 by display order
|
||||
|
||||
Result[3]
|
||||
~~~~~~~~~
|
||||
|
||||
SCR bits 0:31 by display order
|
||||
|
||||
Result[4]
|
||||
~~~~~~~~~
|
||||
|
||||
SCR bit 32 by display order
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_SET_AUDIO_MODE
|
||||
--------------------------
|
||||
|
||||
Enum: 22/0x16
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Select audio mode
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
Dual mono mode action
|
||||
0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged
|
||||
|
||||
Param[1]
|
||||
~~~~~~~~
|
||||
|
||||
Stereo mode action:
|
||||
0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_SET_EVENT_NOTIFICATION
|
||||
----------------------------------
|
||||
|
||||
Enum: 23/0x17
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Setup firmware to notify the host about a particular event.
|
||||
Counterpart to API 0xD5
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
Event:
|
||||
- 0=Audio mode change between mono, (joint) stereo and dual channel.
|
||||
- 3=Decoder started
|
||||
- 4=Unknown: goes off 10-15 times per second while decoding.
|
||||
- 5=Some sync event: goes off once per frame.
|
||||
|
||||
Param[1]
|
||||
~~~~~~~~
|
||||
|
||||
Notification 0=disabled, 1=enabled
|
||||
|
||||
Param[2]
|
||||
~~~~~~~~
|
||||
|
||||
Interrupt bit
|
||||
|
||||
Param[3]
|
||||
~~~~~~~~
|
||||
|
||||
Mailbox slot, -1 if no mailbox required.
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_SET_DISPLAY_BUFFERS
|
||||
-------------------------------
|
||||
|
||||
Enum: 24/0x18
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Number of display buffers. To decode all frames in reverse playback you
|
||||
must use nine buffers.
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
0=six buffers, 1=nine buffers
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_EXTRACT_VBI
|
||||
-----------------------
|
||||
|
||||
Enum: 25/0x19
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Extracts VBI data
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
0=extract from extension & user data, 1=extract from private packets
|
||||
|
||||
Result[0]
|
||||
~~~~~~~~~
|
||||
|
||||
VBI table location
|
||||
|
||||
Result[1]
|
||||
~~~~~~~~~
|
||||
|
||||
VBI table size
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_SET_DECODER_SOURCE
|
||||
------------------------------
|
||||
|
||||
Enum: 26/0x1A
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Selects decoder source. Ensure that the parameters passed to this
|
||||
API match the encoder settings.
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
Mode: 0=MPEG from host, 1=YUV from encoder, 2=YUV from host
|
||||
|
||||
Param[1]
|
||||
~~~~~~~~
|
||||
|
||||
YUV picture width
|
||||
|
||||
Param[2]
|
||||
~~~~~~~~
|
||||
|
||||
YUV picture height
|
||||
|
||||
Param[3]
|
||||
~~~~~~~~
|
||||
|
||||
Bitmap: see Param[0] of API 0xBD
|
||||
|
||||
|
||||
|
||||
CX2341X_DEC_SET_PREBUFFERING
|
||||
----------------------------
|
||||
|
||||
Enum: 30/0x1E
|
||||
|
||||
Description
|
||||
~~~~~~~~~~~
|
||||
|
||||
Decoder prebuffering, when enabled up to 128KB are buffered for
|
||||
streams <8mpbs or 640KB for streams >8mbps
|
||||
|
||||
Param[0]
|
||||
~~~~~~~~
|
||||
|
||||
0=off, 1=on
|
||||
@ -27,6 +27,7 @@ License".
|
||||
cafe_ccic
|
||||
cpia2
|
||||
cx18
|
||||
cx2341x
|
||||
cx88
|
||||
davinci-vpbe
|
||||
fimc
|
||||
|
||||
@ -1,297 +0,0 @@
|
||||
Decoder firmware API description
|
||||
================================
|
||||
|
||||
Note: this API is part of the decoder firmware, so it's cx23415 only.
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_PING_FW
|
||||
Enum 0/0x00
|
||||
Description
|
||||
This API call does nothing. It may be used to check if the firmware
|
||||
is responding.
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_START_PLAYBACK
|
||||
Enum 1/0x01
|
||||
Description
|
||||
Begin or resume playback.
|
||||
Param[0]
|
||||
0 based frame number in GOP to begin playback from.
|
||||
Param[1]
|
||||
Specifies the number of muted audio frames to play before normal
|
||||
audio resumes. (This is not implemented in the firmware, leave at 0)
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_STOP_PLAYBACK
|
||||
Enum 2/0x02
|
||||
Description
|
||||
Ends playback and clears all decoder buffers. If PTS is not zero,
|
||||
playback stops at specified PTS.
|
||||
Param[0]
|
||||
Display 0=last frame, 1=black
|
||||
Note: this takes effect immediately, so if you want to wait for a PTS,
|
||||
then use '0', otherwise the screen goes to black at once.
|
||||
You can call this later (even if there is no playback) with a 1 value
|
||||
to set the screen to black.
|
||||
Param[1]
|
||||
PTS low
|
||||
Param[2]
|
||||
PTS high
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_SET_PLAYBACK_SPEED
|
||||
Enum 3/0x03
|
||||
Description
|
||||
Playback stream at speed other than normal. There are two modes of
|
||||
operation:
|
||||
Smooth: host transfers entire stream and firmware drops unused
|
||||
frames.
|
||||
Coarse: host drops frames based on indexing as required to achieve
|
||||
desired speed.
|
||||
Param[0]
|
||||
Bitmap:
|
||||
0:7 0 normal
|
||||
1 fast only "1.5 times"
|
||||
n nX fast, 1/nX slow
|
||||
30 Framedrop:
|
||||
'0' during 1.5 times play, every other B frame is dropped
|
||||
'1' during 1.5 times play, stream is unchanged (bitrate
|
||||
must not exceed 8mbps)
|
||||
31 Speed:
|
||||
'0' slow
|
||||
'1' fast
|
||||
Note: n is limited to 2. Anything higher does not result in
|
||||
faster playback. Instead the host should start dropping frames.
|
||||
Param[1]
|
||||
Direction: 0=forward, 1=reverse
|
||||
Note: to make reverse playback work you have to write full GOPs in
|
||||
reverse order.
|
||||
Param[2]
|
||||
Picture mask:
|
||||
1=I frames
|
||||
3=I, P frames
|
||||
7=I, P, B frames
|
||||
Param[3]
|
||||
B frames per GOP (for reverse play only)
|
||||
Note: for reverse playback the Picture Mask should be set to I or I, P.
|
||||
Adding B frames to the mask will result in corrupt video. This field
|
||||
has to be set to the correct value in order to keep the timing correct.
|
||||
Param[4]
|
||||
Mute audio: 0=disable, 1=enable
|
||||
Param[5]
|
||||
Display 0=frame, 1=field
|
||||
Param[6]
|
||||
Specifies the number of muted audio frames to play before normal audio
|
||||
resumes. (Not implemented in the firmware, leave at 0)
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_STEP_VIDEO
|
||||
Enum 5/0x05
|
||||
Description
|
||||
Each call to this API steps the playback to the next unit defined below
|
||||
in the current playback direction.
|
||||
Param[0]
|
||||
0=frame, 1=top field, 2=bottom field
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_SET_DMA_BLOCK_SIZE
|
||||
Enum 8/0x08
|
||||
Description
|
||||
Set DMA transfer block size. Counterpart to API 0xC9
|
||||
Param[0]
|
||||
DMA transfer block size in bytes. A different size may be specified
|
||||
when issuing the DMA transfer command.
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_GET_XFER_INFO
|
||||
Enum 9/0x09
|
||||
Description
|
||||
This API call may be used to detect an end of stream condition.
|
||||
Result[0]
|
||||
Stream type
|
||||
Result[1]
|
||||
Address offset
|
||||
Result[2]
|
||||
Maximum bytes to transfer
|
||||
Result[3]
|
||||
Buffer fullness
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_GET_DMA_STATUS
|
||||
Enum 10/0x0A
|
||||
Description
|
||||
Status of the last DMA transfer
|
||||
Result[0]
|
||||
Bit 1 set means transfer complete
|
||||
Bit 2 set means DMA error
|
||||
Bit 3 set means linked list error
|
||||
Result[1]
|
||||
DMA type: 0=MPEG, 1=OSD, 2=YUV
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_SCHED_DMA_FROM_HOST
|
||||
Enum 11/0x0B
|
||||
Description
|
||||
Setup DMA from host operation. Counterpart to API 0xCC
|
||||
Param[0]
|
||||
Memory address of link list
|
||||
Param[1]
|
||||
Total # of bytes to transfer
|
||||
Param[2]
|
||||
DMA type (0=MPEG, 1=OSD, 2=YUV)
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_PAUSE_PLAYBACK
|
||||
Enum 13/0x0D
|
||||
Description
|
||||
Freeze playback immediately. In this mode, when internal buffers are
|
||||
full, no more data will be accepted and data request IRQs will be
|
||||
masked.
|
||||
Param[0]
|
||||
Display: 0=last frame, 1=black
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_HALT_FW
|
||||
Enum 14/0x0E
|
||||
Description
|
||||
The firmware is halted and no further API calls are serviced until
|
||||
the firmware is uploaded again.
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_SET_STANDARD
|
||||
Enum 16/0x10
|
||||
Description
|
||||
Selects display standard
|
||||
Param[0]
|
||||
0=NTSC, 1=PAL
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_GET_VERSION
|
||||
Enum 17/0x11
|
||||
Description
|
||||
Returns decoder firmware version information
|
||||
Result[0]
|
||||
Version bitmask:
|
||||
Bits 0:15 build
|
||||
Bits 16:23 minor
|
||||
Bits 24:31 major
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_SET_STREAM_INPUT
|
||||
Enum 20/0x14
|
||||
Description
|
||||
Select decoder stream input port
|
||||
Param[0]
|
||||
0=memory (default), 1=streaming
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_GET_TIMING_INFO
|
||||
Enum 21/0x15
|
||||
Description
|
||||
Returns timing information from start of playback
|
||||
Result[0]
|
||||
Frame count by decode order
|
||||
Result[1]
|
||||
Video PTS bits 0:31 by display order
|
||||
Result[2]
|
||||
Video PTS bit 32 by display order
|
||||
Result[3]
|
||||
SCR bits 0:31 by display order
|
||||
Result[4]
|
||||
SCR bit 32 by display order
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_SET_AUDIO_MODE
|
||||
Enum 22/0x16
|
||||
Description
|
||||
Select audio mode
|
||||
Param[0]
|
||||
Dual mono mode action
|
||||
0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged
|
||||
Param[1]
|
||||
Stereo mode action:
|
||||
0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_SET_EVENT_NOTIFICATION
|
||||
Enum 23/0x17
|
||||
Description
|
||||
Setup firmware to notify the host about a particular event.
|
||||
Counterpart to API 0xD5
|
||||
Param[0]
|
||||
Event: 0=Audio mode change between mono, (joint) stereo and dual channel.
|
||||
Event: 3=Decoder started
|
||||
Event: 4=Unknown: goes off 10-15 times per second while decoding.
|
||||
Event: 5=Some sync event: goes off once per frame.
|
||||
Param[1]
|
||||
Notification 0=disabled, 1=enabled
|
||||
Param[2]
|
||||
Interrupt bit
|
||||
Param[3]
|
||||
Mailbox slot, -1 if no mailbox required.
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_SET_DISPLAY_BUFFERS
|
||||
Enum 24/0x18
|
||||
Description
|
||||
Number of display buffers. To decode all frames in reverse playback you
|
||||
must use nine buffers.
|
||||
Param[0]
|
||||
0=six buffers, 1=nine buffers
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_EXTRACT_VBI
|
||||
Enum 25/0x19
|
||||
Description
|
||||
Extracts VBI data
|
||||
Param[0]
|
||||
0=extract from extension & user data, 1=extract from private packets
|
||||
Result[0]
|
||||
VBI table location
|
||||
Result[1]
|
||||
VBI table size
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_SET_DECODER_SOURCE
|
||||
Enum 26/0x1A
|
||||
Description
|
||||
Selects decoder source. Ensure that the parameters passed to this
|
||||
API match the encoder settings.
|
||||
Param[0]
|
||||
Mode: 0=MPEG from host, 1=YUV from encoder, 2=YUV from host
|
||||
Param[1]
|
||||
YUV picture width
|
||||
Param[2]
|
||||
YUV picture height
|
||||
Param[3]
|
||||
Bitmap: see Param[0] of API 0xBD
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Name CX2341X_DEC_SET_PREBUFFERING
|
||||
Enum 30/0x1E
|
||||
Description
|
||||
Decoder prebuffering, when enabled up to 128KB are buffered for
|
||||
streams <8mpbs or 640KB for streams >8mbps
|
||||
Param[0]
|
||||
0=off, 1=on
|
||||
Loading…
Reference in New Issue
Block a user