habanalabs/gaudi: handle reset when f/w is in preboot

Currently, if the f/w is in preboot/u-boot they don't perform the new
reset mechanism. Therefore, the driver needs to reset the device.
To prevent reset of PCI_IF, the driver needs to first configure the
reset units.

If the security is enabled, the driver can't configure the reset units.
In that situation, don't reset the card.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit is contained in:
Oded Gabbay 2020-11-26 18:11:05 +02:00
parent ee3287798d
commit a63c3fb37b

View File

@ -3829,33 +3829,6 @@ static void gaudi_pre_hw_init(struct hl_device *hdev)
* cleared by the H/W upon H/W reset
*/
WREG32(mmHW_STATE, HL_DEVICE_HW_STATE_DIRTY);
if (hdev->asic_prop.fw_security_disabled) {
/* Configure the reset registers. Must be done as early as
* possible in case we fail during H/W initialization
*/
WREG32(mmPSOC_GLOBAL_CONF_SOFT_RST_CFG_H,
(CFG_RST_H_DMA_MASK |
CFG_RST_H_MME_MASK |
CFG_RST_H_SM_MASK |
CFG_RST_H_TPC_7_MASK));
WREG32(mmPSOC_GLOBAL_CONF_SOFT_RST_CFG_L, CFG_RST_L_TPC_MASK);
WREG32(mmPSOC_GLOBAL_CONF_SW_ALL_RST_CFG_H,
(CFG_RST_H_HBM_MASK |
CFG_RST_H_TPC_7_MASK |
CFG_RST_H_NIC_MASK |
CFG_RST_H_SM_MASK |
CFG_RST_H_DMA_MASK |
CFG_RST_H_MME_MASK |
CFG_RST_H_CPU_MASK |
CFG_RST_H_MMU_MASK));
WREG32(mmPSOC_GLOBAL_CONF_SW_ALL_RST_CFG_L,
(CFG_RST_L_IF_MASK |
CFG_RST_L_PSOC_MASK |
CFG_RST_L_TPC_MASK));
}
}
static int gaudi_hw_init(struct hl_device *hdev)
@ -3946,7 +3919,8 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
/* Set device to handle FLR by H/W as we will put the device CPU to
* halt mode
*/
if (!hdev->asic_prop.hard_reset_done_by_fw)
if (hdev->asic_prop.fw_security_disabled &&
!hdev->asic_prop.hard_reset_done_by_fw)
WREG32(mmPCIE_AUX_FLR_CTRL, (PCIE_AUX_FLR_CTRL_HW_CTRL_MASK |
PCIE_AUX_FLR_CTRL_INT_MASK_MASK));
@ -3957,7 +3931,35 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR, GAUDI_EVENT_HALT_MACHINE);
if (!hdev->asic_prop.hard_reset_done_by_fw) {
if (hdev->asic_prop.fw_security_disabled &&
!hdev->asic_prop.hard_reset_done_by_fw) {
/* Configure the reset registers. Must be done as early as
* possible in case we fail during H/W initialization
*/
WREG32(mmPSOC_GLOBAL_CONF_SOFT_RST_CFG_H,
(CFG_RST_H_DMA_MASK |
CFG_RST_H_MME_MASK |
CFG_RST_H_SM_MASK |
CFG_RST_H_TPC_7_MASK));
WREG32(mmPSOC_GLOBAL_CONF_SOFT_RST_CFG_L, CFG_RST_L_TPC_MASK);
WREG32(mmPSOC_GLOBAL_CONF_SW_ALL_RST_CFG_H,
(CFG_RST_H_HBM_MASK |
CFG_RST_H_TPC_7_MASK |
CFG_RST_H_NIC_MASK |
CFG_RST_H_SM_MASK |
CFG_RST_H_DMA_MASK |
CFG_RST_H_MME_MASK |
CFG_RST_H_CPU_MASK |
CFG_RST_H_MMU_MASK));
WREG32(mmPSOC_GLOBAL_CONF_SW_ALL_RST_CFG_L,
(CFG_RST_L_IF_MASK |
CFG_RST_L_PSOC_MASK |
CFG_RST_L_TPC_MASK));
msleep(cpu_timeout_ms);
/* Tell ASIC not to re-initialize PCIe */