ARM: nomadik: move last custom calls to pinctrl

The I2C pins were still set up using custom nmk_* calls, move
these to use the pinctrl mapping table instead. There was also
a remaining call to turn the Ethernet pin to GPIO, and this is
now done implicitly by the GPIO-to-pinctrl range translation
calls.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Linus Walleij 2013-01-03 23:39:44 +01:00
parent f8060f5446
commit a352d85adb
2 changed files with 9 additions and 12 deletions

View File

@ -238,7 +238,6 @@ static int __init nhk8815_eth_init(void)
int err;
err = gpio_request(gpio_nr, "eth_irq");
if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
if (!err) err = gpio_direction_input(gpio_nr);
if (err)
pr_err("Error %i in %s\n", err, __func__);
@ -321,6 +320,15 @@ static struct pinctrl_map __initdata nhk8815_pinmap[] = {
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
/* CD bias drive */
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
/* I2C0 */
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup),
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup),
/* I2C1 */
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup),
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup),
/* I2C2 */
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup),
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup),
};
static void __init nhk8815_platform_init(void)

View File

@ -4,7 +4,6 @@
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/pinctrl-nomadik.h>
/*
* There are two busses in the 8815NHK.
@ -57,18 +56,8 @@ static struct platform_device nhk8815_i2c_dev2 = {
},
};
static pin_cfg_t cpu8815_pins_i2c[] = {
PIN_CFG_INPUT(62, GPIO, PULLUP),
PIN_CFG_INPUT(63, GPIO, PULLUP),
PIN_CFG_INPUT(53, GPIO, PULLUP),
PIN_CFG_INPUT(54, GPIO, PULLUP),
PIN_CFG_INPUT(73, GPIO, PULLUP),
PIN_CFG_INPUT(74, GPIO, PULLUP),
};
static int __init nhk8815_i2c_init(void)
{
nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c));
platform_device_register(&nhk8815_i2c_dev0);
platform_device_register(&nhk8815_i2c_dev1);
platform_device_register(&nhk8815_i2c_dev2);