diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt new file mode 100644 index 000000000000..2726c1d58a79 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt @@ -0,0 +1,49 @@ +Binding for Samsung S2M and S5M family clock generator block +============================================================ + +This is a part of device tree bindings for S2M and S5M family multi-function +devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz +outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs. + +To register these as clocks with common clock framework instantiate under +main device node a sub-node named "clocks". + +It uses the common clock binding documented in: + - Documentation/devicetree/bindings/clock/clock-bindings.txt + + +Required properties of the "clocks" sub-node: + - #clock-cells: should be 1. + - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", + "samsung,s2mps14-clk", "samsung,s5m8767-clk" + The S2MPS15 uses the same compatible as S2MPS13, as both provides similar + clocks. + + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + Clock ID Devices + ---------------------------------------------------------- + 32KhzAP 0 S2MPS11/13/14/15, S5M8767 + 32KhzCP 1 S2MPS11/13/15, S5M8767 + 32KhzBT 2 S2MPS11/13/14/15, S5M8767 + +Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines +in device tree sources. + + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + s2m_osc: clocks { + compatible = "samsung,s2mps11-clk"; + #clock-cells = <1>; + clock-output-names = "xx", "yy", "zz"; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt deleted file mode 100644 index 09b94c97faac..000000000000 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ /dev/null @@ -1,153 +0,0 @@ - -* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator - -The Samsung S2MPS11 is a multi-function device which includes voltage and -current regulators, RTC, charger controller and other sub-blocks. It is -interfaced to the host controller using an I2C interface. Each sub-block is -addressed by the host system using different I2C slave addresses. - -Required properties: -- compatible: Should be one of the following - - "samsung,s2mps11-pmic" - - "samsung,s2mps13-pmic" - - "samsung,s2mps14-pmic" - - "samsung,s2mps15-pmic" - - "samsung,s2mpu02-pmic". -- reg: Specifies the I2C slave address of the pmic block. It should be 0x66. - -Optional properties: -- interrupt-parent: Specifies the phandle of the interrupt controller to which - the interrupts from s2mps11 are delivered to. -- interrupts: Interrupt specifiers for interrupt sources. -- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled - down. When the system is suspended it will always go down thus triggerring - unwanted buck warm reset (setting buck voltages to default values). -- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is - connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 - register to turn off the power. Usually the ACOKB is pulled up to VBATT so - when PWRHOLD pin goes low, the rising ACOKB will trigger power off. - -Optional nodes: -- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768 - KHz outputs, so to register these as clocks with common clock framework - instantiate a sub-node named "clocks". It uses the common clock binding - documented in : - [Documentation/devicetree/bindings/clock/clock-bindings.txt] - The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs. - - #clock-cells: should be 1. - - - The following is the list of clocks generated by the controller. Each clock - is assigned an identifier and client nodes use this identifier to specify - the clock which they consume. - Clock ID Devices - ---------------------------------------------------------- - 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 - 32KhzCP 1 S2MPS11, S2MPS13, S2MPS15, S5M8767 - 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 - - - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", - "samsung,s2mps14-clk", "samsung,s5m8767-clk" - The s2msp15 uses the same compatible as s2mps13, as both provides similar clocks. - -- regulators: The regulators of s2mps11 that have to be instantiated should be -included in a sub-node named 'regulators'. Regulator nodes included in this -sub-node should be of the format as listed below. - - regulator_name { - [standard regulator constraints....]; - }; - - regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us - - BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly - regulator-ramp-delay = <0> can be used for them to disable ramp delay. - In the absence of the regulator-ramp-delay property, the default ramp - delay will be used. - -NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set -for a particular group of BUCKs. So provide same regulator-ramp-delay. -Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6], -BUCK[3, 4], and BUCK[7, 8, 10] - -On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control -over GPIO. To turn this feature on this property must be added to the regulator -sub-node: - - samsung,ext-control-gpios: GPIO specifier for one GPIO - controlling this regulator (enable/disable); -Example: - LDO12 { - regulator-name = "V_EMMC_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; - }; - - -The regulator constraints inside the regulator nodes use the standard regulator -bindings which are documented elsewhere. - -The following are the names of the regulators that the s2mps11 pmic block -supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of s2mps11. - - - LDOn - - valid values for n are: - - S2MPS11: 1 to 38 - - S2MPS13: 1 to 40 - - S2MPS14: 1 to 25 - - S2MPS15: 1 to 27 - - S2MPU02: 1 to 28 - - Example: LDO1, LDO2, LDO28 - - BUCKn - - valid values for n are: - - S2MPS11: 1 to 10 - - S2MPS13: 1 to 10 - - S2MPS14: 1 to 5 - - S2MPS15: 1 to 10 - - S2MPU02: 1 to 7 - - Example: BUCK1, BUCK2, BUCK9 - -Example: - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - s2m_osc: clocks { - compatible = "samsung,s2mps11-clk"; - #clock-cells = <1>; - clock-output-names = "xx", "yy", "zz"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt new file mode 100644 index 000000000000..ef0166d0f643 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt @@ -0,0 +1,84 @@ +Binding for Samsung S2M and S5M family multi-function device +============================================================ + +This is a part of device tree bindings for S2M and S5M family multi-function +devices. + +The Samsung S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family +of multi-function devices which include voltage and current regulators, RTC, +charger controller, clock outputs and other sub-blocks. It is interfaced +to the host controller using an I2C interface. Each sub-block is usually +addressed by the host system using different I2C slave addresses. + + +This document describes bindings for main device node. Optional sub-blocks +must be a sub-nodes to it. Bindings for them can be found in: + - bindings/regulator/samsung,s2mps11.txt + - bindings/clock/samsung,s2mps11.txt + + +Required properties: + - compatible: Should be one of the following + - "samsung,s2mps11-pmic", + - "samsung,s2mps13-pmic", + - "samsung,s2mps14-pmic", + - "samsung,s2mps15-pmic", + - "samsung,s2mpu02-pmic". + - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. + +Optional properties: + - interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from s2mps11 are delivered to. + - interrupts: Interrupt specifiers for interrupt sources. + - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled + down. When the system is suspended it will always go down thus triggerring + unwanted buck warm reset (setting buck voltages to default values). + - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is + connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 + register to turn off the power. Usually the ACOKB is pulled up to VBATT so + when PWRHOLD pin goes low, the rising ACOKB will trigger power off. + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + s2m_osc: clocks { + compatible = "samsung,s2mps11-clk"; + #clock-cells = <1>; + clock-output-names = "xx", "yy", "zz"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt new file mode 100644 index 000000000000..27a48bf1b185 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt @@ -0,0 +1,102 @@ +Binding for Samsung S2M family regulator block +============================================== + +This is a part of device tree bindings for S2M family multi-function devices. +More information can be found in bindings/mfd/sec-core.txt file. + +The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators. + +To register these with regulator framework instantiate under main device node +a sub-node named "regulators" with more sub-nodes for each regulator using the +common regulator binding documented in: + - Documentation/devicetree/bindings/regulator/regulator.txt + + +Names of regulators supported by different devices: + - LDOn + - valid values for n are: + - S2MPS11: 1 to 38 + - S2MPS13: 1 to 40 + - S2MPS14: 1 to 25 + - S2MPS15: 1 to 27 + - S2MPU02: 1 to 28 + - Example: LDO1, LDO2, LDO28 + - BUCKn + - valid values for n are: + - S2MPS11: 1 to 10 + - S2MPS13: 1 to 10 + - S2MPS14: 1 to 5 + - S2MPS15: 1 to 10 + - S2MPU02: 1 to 7 + - Example: BUCK1, BUCK2, BUCK9 +Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of device. + + +Optional properties of the nodes under "regulators" sub-node: + - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500, + 25000 (default) or 50000. + + Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6} + by setting it to <0>. + + Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value + will be set for a particular group of bucks so provide the same + regulator-ramp-delay value for them. + Groups sharing ramp rate: + - buck{1,6}, + - buck{3,4}, + - buck{7,8,10}. + + - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be + configured to external control over GPIO. To turn this feature on this + property must be added to the regulator sub-node: + - samsung,ext-control-gpios: GPIO specifier for one GPIO + controlling this regulator (enable/disable) + Example: + LDO12 { + regulator-name = "V_EMMC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + samsung,ext-control-gpios = <&gpk0 2 0>; + }; + + +Example: + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50000>; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 25b727556dc7..2c0bbced0532 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9224,7 +9224,9 @@ F: drivers/clk/clk-s2mps11.c F: drivers/rtc/rtc-s5m.c F: include/linux/mfd/samsung/ F: Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt -F: Documentation/devicetree/bindings/mfd/s2mp*.txt +F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +F: Documentation/devicetree/bindings/regulator/samsung,s2m*.txt +F: Documentation/devicetree/bindings/clock/samsung,s2mps11.txt SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS M: Kyungmin Park