sh: fixed PMB mode refactoring.

This introduces some much overdue chainsawing of the fixed PMB support.
fixed PMB was introduced initially to work around the fact that dynamic
PMB mode was relatively broken, though they were never intended to
converge. The main areas where there are differences are whether the
system is booted in 29-bit mode or 32-bit mode, and whether legacy
mappings are to be preserved. Any system booting in true 32-bit mode will
not care about legacy mappings, so these are roughly decoupled.

Regardless of the entry point, PMB and 32BIT are directly related as far
as the kernel is concerned, so we also switch back to having one select
the other.

With legacy mappings iterated through and applied in the initialization
path it's now possible to finally merge the two implementations and
permit dynamic remapping overtop of remaining entries regardless of
whether boot mappings are crafted by hand or inherited from the boot
loader.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Paul Mundt 2010-01-13 18:31:48 +09:00
parent 7f33306ee5
commit a0ab36689a
11 changed files with 117 additions and 97 deletions

View File

@ -46,15 +46,8 @@ $(obj)/romImage: $(obj)/romimage/vmlinux FORCE
$(obj)/romimage/vmlinux: $(obj)/zImage FORCE $(obj)/romimage/vmlinux: $(obj)/zImage FORCE
$(Q)$(MAKE) $(build)=$(obj)/romimage $@ $(Q)$(MAKE) $(build)=$(obj)/romimage $@
KERNEL_MEMORY := 0x00000000
ifeq ($(CONFIG_PMB_FIXED),y)
KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \ KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_MEMORY_START) & 0x1fffffff]') $$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
endif
ifeq ($(CONFIG_29BIT),y)
KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_MEMORY_START)]')
endif
KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \ KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \ $$[$(CONFIG_PAGE_OFFSET) + \

View File

@ -28,7 +28,7 @@
/* Returns the privileged segment base of a given address */ /* Returns the privileged segment base of a given address */
#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) #define PXSEG(a) (((unsigned long)(a)) & 0xe0000000)
#if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED) #ifdef CONFIG_29BIT
/* /*
* Map an address to a certain privileged segment * Map an address to a certain privileged segment
*/ */
@ -40,7 +40,7 @@
((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
#define P4SEGADDR(a) \ #define P4SEGADDR(a) \
((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
#endif /* 29BIT || PMB_FIXED */ #endif /* 29BIT */
#endif /* P1SEG */ #endif /* P1SEG */
/* Check if an address can be reached in 29 bits */ /* Check if an address can be reached in 29 bits */

View File

@ -244,18 +244,11 @@ __ioremap(unsigned long offset, unsigned long size, unsigned long flags)
} }
static inline void __iomem * static inline void __iomem *
__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) __ioremap_29bit(unsigned long offset, unsigned long size, unsigned long flags)
{ {
#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB) #ifdef CONFIG_29BIT
unsigned long last_addr = offset + size - 1; unsigned long last_addr = offset + size - 1;
#endif
void __iomem *ret;
ret = __ioremap_trapped(offset, size);
if (ret)
return ret;
#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB)
/* /*
* For P1 and P2 space this is trivial, as everything is already * For P1 and P2 space this is trivial, as everything is already
* mapped. Uncached access for P1 addresses are done through P2. * mapped. Uncached access for P1 addresses are done through P2.
@ -274,6 +267,22 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
return (void __iomem *)P4SEGADDR(offset); return (void __iomem *)P4SEGADDR(offset);
#endif #endif
return NULL;
}
static inline void __iomem *
__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
{
void __iomem *ret;
ret = __ioremap_trapped(offset, size);
if (ret)
return ret;
ret = __ioremap_29bit(offset, size, flags);
if (ret)
return ret;
return __ioremap(offset, size, flags); return __ioremap(offset, size, flags);
} }
#else #else

View File

@ -65,11 +65,29 @@ struct pmb_entry {
struct pmb_entry *link; struct pmb_entry *link;
}; };
#ifdef CONFIG_PMB
/* arch/sh/mm/pmb.c */ /* arch/sh/mm/pmb.c */
long pmb_remap(unsigned long virt, unsigned long phys, long pmb_remap(unsigned long virt, unsigned long phys,
unsigned long size, unsigned long flags); unsigned long size, unsigned long flags);
void pmb_unmap(unsigned long addr); void pmb_unmap(unsigned long addr);
int pmb_init(void); int pmb_init(void);
#else
static inline long pmb_remap(unsigned long virt, unsigned long phys,
unsigned long size, unsigned long flags)
{
return -EINVAL
}
static inline void pmb_unmap(unsigned long addr)
{
}
static inline int pmb_init(void)
{
return -ENODEV;
}
#endif /* CONFIG_PMB */
#endif /* __ASSEMBLY__ */ #endif /* __ASSEMBLY__ */
#endif /* __MMU_H */ #endif /* __MMU_H */

View File

@ -127,7 +127,7 @@ typedef struct page *pgtable_t;
* is not visible (it is part of the PMB mapping) and so needs to be * is not visible (it is part of the PMB mapping) and so needs to be
* added or subtracted as required. * added or subtracted as required.
*/ */
#if defined(CONFIG_PMB_FIXED) #if defined(CONFIG_PMB_LEGACY)
/* phys = virt - PAGE_OFFSET - (__MEMORY_START & 0xe0000000) */ /* phys = virt - PAGE_OFFSET - (__MEMORY_START & 0xe0000000) */
#define PMB_OFFSET (PAGE_OFFSET - PXSEG(__MEMORY_START)) #define PMB_OFFSET (PAGE_OFFSET - PXSEG(__MEMORY_START))
#define __pa(x) ((unsigned long)(x) - PMB_OFFSET) #define __pa(x) ((unsigned long)(x) - PMB_OFFSET)

View File

@ -13,6 +13,8 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/linkage.h> #include <linux/linkage.h>
#include <asm/thread_info.h> #include <asm/thread_info.h>
#include <asm/mmu.h>
#include <cpu/mmu_context.h>
#ifdef CONFIG_CPU_SH4A #ifdef CONFIG_CPU_SH4A
#define SYNCO() synco #define SYNCO() synco
@ -33,7 +35,7 @@ ENTRY(empty_zero_page)
.long 1 /* LOADER_TYPE */ .long 1 /* LOADER_TYPE */
.long 0x00000000 /* INITRD_START */ .long 0x00000000 /* INITRD_START */
.long 0x00000000 /* INITRD_SIZE */ .long 0x00000000 /* INITRD_SIZE */
#if defined(CONFIG_32BIT) && defined(CONFIG_PMB_FIXED) #ifdef CONFIG_32BIT
.long 0x53453f00 + 32 /* "SE?" = 32 bit */ .long 0x53453f00 + 32 /* "SE?" = 32 bit */
#else #else
.long 0x53453f00 + 29 /* "SE?" = 29 bit */ .long 0x53453f00 + 29 /* "SE?" = 29 bit */

View File

@ -455,10 +455,7 @@ void __init setup_arch(char **cmdline_p)
sh_mv.mv_setup(cmdline_p); sh_mv.mv_setup(cmdline_p);
paging_init(); paging_init();
#ifdef CONFIG_PMB_ENABLE
pmb_init(); pmb_init();
#endif
#ifdef CONFIG_SMP #ifdef CONFIG_SMP
plat_smp_setup(); plat_smp_setup();

View File

@ -14,17 +14,16 @@ OUTPUT_ARCH(sh)
#include <asm/cache.h> #include <asm/cache.h>
#include <asm/vmlinux.lds.h> #include <asm/vmlinux.lds.h>
#if defined(CONFIG_32BIT) && !defined(CONFIG_PMB_LEGACY)
#define MEMORY_OFFSET 0
#else
#define MEMORY_OFFSET (CONFIG_MEMORY_START & 0x1fffffff)
#endif
ENTRY(_start) ENTRY(_start)
SECTIONS SECTIONS
{ {
#ifdef CONFIG_PMB_FIXED . = CONFIG_PAGE_OFFSET + MEMORY_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
. = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) +
CONFIG_ZERO_PAGE_OFFSET;
#elif defined(CONFIG_32BIT)
. = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
#else
. = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
#endif
_text = .; /* Text and read-only data */ _text = .; /* Text and read-only data */

View File

@ -80,30 +80,18 @@ config 32BIT
bool bool
default y if CPU_SH5 default y if CPU_SH5
config PMB_ENABLE config PMB
bool "Support 32-bit physical addressing through PMB" bool "Support 32-bit physical addressing through PMB"
depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
select 32BIT
help help
If you say Y here, physical addressing will be extended to If you say Y here, physical addressing will be extended to
32-bits through the SH-4A PMB. If this is not set, legacy 32-bits through the SH-4A PMB. If this is not set, legacy
29-bit physical addressing will be used. 29-bit physical addressing will be used.
choice config PMB_LEGACY
prompt "PMB handling type" bool "Support legacy boot mappings for PMB"
depends on PMB_ENABLE depends on PMB
default PMB_FIXED
config PMB
bool "PMB"
depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
help
If you say Y here, physical addressing will be extended to
32-bits through the SH-4A PMB. If this is not set, legacy
29-bit physical addressing will be used.
config PMB_FIXED
bool "fixed PMB"
depends on MMU && EXPERIMENTAL && CPU_SH4A && !CPU_SH4AL_DSP
select 32BIT select 32BIT
help help
If this option is enabled, fixed PMB mappings are inherited If this option is enabled, fixed PMB mappings are inherited
@ -111,8 +99,6 @@ config PMB_FIXED
management. This is the closest to legacy 29-bit physical mode, management. This is the closest to legacy 29-bit physical mode,
and allows systems to support up to 512MiB of system memory. and allows systems to support up to 512MiB of system memory.
endchoice
config X2TLB config X2TLB
bool "Enable extended TLB mode" bool "Enable extended TLB mode"
depends on (CPU_SHX2 || CPU_SHX3) && MMU && EXPERIMENTAL depends on (CPU_SHX2 || CPU_SHX3) && MMU && EXPERIMENTAL

View File

@ -33,7 +33,7 @@ obj-y += $(tlb-y)
endif endif
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PMB_ENABLE) += pmb.o obj-$(CONFIG_PMB) += pmb.o
obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_NUMA) += numa.o
# Special flags for fault_64.o. This puts restrictions on the number of # Special flags for fault_64.o. This puts restrictions on the number of

View File

@ -3,7 +3,7 @@
* *
* Privileged Space Mapping Buffer (PMB) Support. * Privileged Space Mapping Buffer (PMB) Support.
* *
* Copyright (C) 2005, 2006, 2007 Paul Mundt * Copyright (C) 2005 - 2010 Paul Mundt
* *
* P1/P2 Section mapping definitions from map32.h, which was: * P1/P2 Section mapping definitions from map32.h, which was:
* *
@ -279,51 +279,12 @@ static void __pmb_unmap(struct pmb_entry *pmbe)
} while (pmbe); } while (pmbe);
} }
#ifdef CONFIG_PMB #ifdef CONFIG_PMB_LEGACY
int __uses_jump_to_uncached pmb_init(void) static int pmb_apply_legacy_mappings(void)
{
unsigned int i;
long size, ret;
jump_to_uncached();
/*
* Insert PMB entries for the P1 and P2 areas so that, after
* we've switched the MMU to 32-bit mode, the semantics of P1
* and P2 are the same as in 29-bit mode, e.g.
*
* P1 - provides a cached window onto physical memory
* P2 - provides an uncached window onto physical memory
*/
size = __MEMORY_START + __MEMORY_SIZE;
ret = pmb_remap(P1SEG, 0x00000000, size, PMB_C);
BUG_ON(ret != size);
ret = pmb_remap(P2SEG, 0x00000000, size, PMB_WT | PMB_UB);
BUG_ON(ret != size);
ctrl_outl(0, PMB_IRMCR);
/* PMB.SE and UB[7] */
ctrl_outl(PASCR_SE | (1 << 7), PMB_PASCR);
/* Flush out the TLB */
i = ctrl_inl(MMUCR);
i |= MMUCR_TI;
ctrl_outl(i, MMUCR);
back_to_cached();
return 0;
}
#else
int __uses_jump_to_uncached pmb_init(void)
{ {
int i; int i;
unsigned long addr, data; unsigned long addr, data;
unsigned int applied = 0;
jump_to_uncached();
for (i = 0; i < PMB_ENTRY_MAX; i++) { for (i = 0; i < PMB_ENTRY_MAX; i++) {
struct pmb_entry *pmbe; struct pmb_entry *pmbe;
@ -357,13 +318,69 @@ int __uses_jump_to_uncached pmb_init(void)
pmbe = pmb_alloc(vpn, ppn, flags, i); pmbe = pmb_alloc(vpn, ppn, flags, i);
WARN_ON(IS_ERR(pmbe)); WARN_ON(IS_ERR(pmbe));
applied++;
} }
return (applied == 0);
}
#else
static inline int pmb_apply_legacy_mappings(void)
{
return 1;
}
#endif
int __uses_jump_to_uncached pmb_init(void)
{
unsigned int i;
unsigned long size, ret;
jump_to_uncached();
/*
* Attempt to apply the legacy boot mappings if configured. If
* this is successful then we simply carry on with those and
* don't bother establishing additional memory mappings. Dynamic
* device mappings through pmb_remap() can still be bolted on
* after this.
*/
ret = pmb_apply_legacy_mappings();
if (ret == 0) {
back_to_cached();
return 0;
}
/*
* Insert PMB entries for the P1 and P2 areas so that, after
* we've switched the MMU to 32-bit mode, the semantics of P1
* and P2 are the same as in 29-bit mode, e.g.
*
* P1 - provides a cached window onto physical memory
* P2 - provides an uncached window onto physical memory
*/
size = (unsigned long)__MEMORY_START + __MEMORY_SIZE;
ret = pmb_remap(P1SEG, 0x00000000, size, PMB_C);
BUG_ON(ret != size);
ret = pmb_remap(P2SEG, 0x00000000, size, PMB_WT | PMB_UB);
BUG_ON(ret != size);
ctrl_outl(0, PMB_IRMCR);
/* PMB.SE and UB[7] */
ctrl_outl(PASCR_SE | (1 << 7), PMB_PASCR);
/* Flush out the TLB */
i = ctrl_inl(MMUCR);
i |= MMUCR_TI;
ctrl_outl(i, MMUCR);
back_to_cached(); back_to_cached();
return 0; return 0;
} }
#endif /* CONFIG_PMB */
static int pmb_seq_show(struct seq_file *file, void *iter) static int pmb_seq_show(struct seq_file *file, void *iter)
{ {
@ -462,6 +479,5 @@ static int __init pmb_sysdev_init(void)
{ {
return sysdev_driver_register(&cpu_sysdev_class, &pmb_sysdev_driver); return sysdev_driver_register(&cpu_sysdev_class, &pmb_sysdev_driver);
} }
subsys_initcall(pmb_sysdev_init); subsys_initcall(pmb_sysdev_init);
#endif #endif