diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 0e2c972292cf..6400e8751391 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -71,26 +71,6 @@ const struct ata_port_operations ata_sff_port_ops = { }; EXPORT_SYMBOL_GPL(ata_sff_port_ops); -const struct ata_port_operations ata_bmdma_port_ops = { - .inherits = &ata_sff_port_ops, - - .mode_filter = ata_bmdma_mode_filter, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, -}; -EXPORT_SYMBOL_GPL(ata_bmdma_port_ops); - -const struct ata_port_operations ata_bmdma32_port_ops = { - .inherits = &ata_bmdma_port_ops, - - .sff_data_xfer = ata_sff_data_xfer32, - .port_start = ata_sff_port_start32, -}; -EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops); - /** * ata_fill_sg - Fill PCI IDE PRD table * @qc: Metadata associated with taskfile to be transferred @@ -1750,7 +1730,7 @@ unsigned int ata_sff_host_intr(struct ata_port *ap, goto idle_irq; } - /* ack bmdma irq events */ + /* clear irq events */ ap->ops->sff_irq_clear(ap); ata_sff_hsm_move(ap, qc, status, 0); @@ -1904,7 +1884,7 @@ EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt); * ata_sff_freeze - Freeze SFF controller port * @ap: port to freeze * - * Freeze BMDMA controller port. + * Freeze SFF controller port. * * LOCKING: * Inherited from caller. @@ -2533,208 +2513,8 @@ void ata_sff_std_ports(struct ata_ioports *ioaddr) } EXPORT_SYMBOL_GPL(ata_sff_std_ports); -unsigned long ata_bmdma_mode_filter(struct ata_device *adev, - unsigned long xfer_mask) -{ - /* Filter out DMA modes if the device has been configured by - the BIOS as PIO only */ - - if (adev->link->ap->ioaddr.bmdma_addr == NULL) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - return xfer_mask; -} -EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter); - -/** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_bmdma_setup(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - - /* load PRD table addr. */ - mb(); /* make sure PRD table writes are visible to controller */ - iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->sff_exec_command(ap, &qc->tf); -} -EXPORT_SYMBOL_GPL(ata_bmdma_setup); - -/** - * ata_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_bmdma_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* Strictly, one may wish to issue an ioread8() here, to - * flush the mmio write. However, control also passes - * to the hardware at this point, and it will interrupt - * us when we are to resume control. So, in effect, - * we don't care when the mmio write flushes. - * Further, a read of the DMA status register _immediately_ - * following the write may not be what certain flaky hardware - * is expected, so I think it is best to not add a readb() - * without first all the MMIO ATA cards/mobos. - * Or maybe I'm just being paranoid. - * - * FIXME: The posting of this write means I/O starts are - * unneccessarily delayed for MMIO - */ -} -EXPORT_SYMBOL_GPL(ata_bmdma_start); - -/** - * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - * - * Clears the ATA_DMA_START flag in the dma control register - * - * May be used as the bmdma_stop() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - /* clear start/stop bit */ - iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, - mmio + ATA_DMA_CMD); - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_dma_pause(ap); -} -EXPORT_SYMBOL_GPL(ata_bmdma_stop); - -/** - * ata_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - * - * Read and return BMDMA status register. - * - * May be used as the bmdma_status() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -u8 ata_bmdma_status(struct ata_port *ap) -{ - return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); -} -EXPORT_SYMBOL_GPL(ata_bmdma_status); - #ifdef CONFIG_PCI -/** - * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex - * @pdev: PCI device - * - * Some PCI ATA devices report simplex mode but in fact can be told to - * enter non simplex mode. This implements the necessary logic to - * perform the task on such devices. Calling it on other devices will - * have -undefined- behaviour. - */ -int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev) -{ - unsigned long bmdma = pci_resource_start(pdev, 4); - u8 simplex; - - if (bmdma == 0) - return -ENOENT; - - simplex = inb(bmdma + 0x02); - outb(simplex & 0x60, bmdma + 0x02); - simplex = inb(bmdma + 0x02); - if (simplex & 0x80) - return -EOPNOTSUPP; - return 0; -} -EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex); - -/** - * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host - * @host: target ATA host - * - * Acquire PCI BMDMA resources and initialize @host accordingly. - * - * LOCKING: - * Inherited from calling layer (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_pci_bmdma_init(struct ata_host *host) -{ - struct device *gdev = host->dev; - struct pci_dev *pdev = to_pci_dev(gdev); - int i, rc; - - /* No BAR4 allocation: No DMA */ - if (pci_resource_start(pdev, 4) == 0) - return 0; - - /* TODO: If we get no DMA mask we should fall back to PIO */ - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - return rc; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - return rc; - - /* request and iomap DMA region */ - rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev)); - if (rc) { - dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n"); - return -ENOMEM; - } - host->iomap = pcim_iomap_table(pdev); - - for (i = 0; i < 2; i++) { - struct ata_port *ap = host->ports[i]; - void __iomem *bmdma = host->iomap[4] + 8 * i; - - if (ata_port_is_dummy(ap)) - continue; - - ap->ioaddr.bmdma_addr = bmdma; - if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) && - (ioread8(bmdma + 2) & 0x80)) - host->flags |= ATA_HOST_SIMPLEX; - - ata_port_desc(ap, "bmdma 0x%llx", - (unsigned long long)pci_resource_start(pdev, 4) + 8 * i); - } - - return 0; -} -EXPORT_SYMBOL_GPL(ata_pci_bmdma_init); - static int ata_resources_present(struct pci_dev *pdev, int port) { int i; @@ -3059,3 +2839,227 @@ out: EXPORT_SYMBOL_GPL(ata_pci_sff_init_one); #endif /* CONFIG_PCI */ + +const struct ata_port_operations ata_bmdma_port_ops = { + .inherits = &ata_sff_port_ops, + + .mode_filter = ata_bmdma_mode_filter, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, +}; +EXPORT_SYMBOL_GPL(ata_bmdma_port_ops); + +const struct ata_port_operations ata_bmdma32_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .sff_data_xfer = ata_sff_data_xfer32, + .port_start = ata_sff_port_start32, +}; +EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops); + +unsigned long ata_bmdma_mode_filter(struct ata_device *adev, + unsigned long xfer_mask) +{ + /* Filter out DMA modes if the device has been configured by + the BIOS as PIO only */ + + if (adev->link->ap->ioaddr.bmdma_addr == NULL) + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + return xfer_mask; +} +EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter); + +/** + * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} +EXPORT_SYMBOL_GPL(ata_bmdma_setup); + +/** + * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 dmactl; + + /* start host DMA transaction */ + dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + /* Strictly, one may wish to issue an ioread8() here, to + * flush the mmio write. However, control also passes + * to the hardware at this point, and it will interrupt + * us when we are to resume control. So, in effect, + * we don't care when the mmio write flushes. + * Further, a read of the DMA status register _immediately_ + * following the write may not be what certain flaky hardware + * is expected, so I think it is best to not add a readb() + * without first all the MMIO ATA cards/mobos. + * Or maybe I'm just being paranoid. + * + * FIXME: The posting of this write means I/O starts are + * unneccessarily delayed for MMIO + */ +} +EXPORT_SYMBOL_GPL(ata_bmdma_start); + +/** + * ata_bmdma_stop - Stop PCI IDE BMDMA transfer + * @qc: Command we are ending DMA for + * + * Clears the ATA_DMA_START flag in the dma control register + * + * May be used as the bmdma_stop() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + /* clear start/stop bit */ + iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, + mmio + ATA_DMA_CMD); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} +EXPORT_SYMBOL_GPL(ata_bmdma_stop); + +/** + * ata_bmdma_status - Read PCI IDE BMDMA status + * @ap: Port associated with this ATA transaction. + * + * Read and return BMDMA status register. + * + * May be used as the bmdma_status() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +u8 ata_bmdma_status(struct ata_port *ap) +{ + return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); +} +EXPORT_SYMBOL_GPL(ata_bmdma_status); + +#ifdef CONFIG_PCI + +/** + * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex + * @pdev: PCI device + * + * Some PCI ATA devices report simplex mode but in fact can be told to + * enter non simplex mode. This implements the necessary logic to + * perform the task on such devices. Calling it on other devices will + * have -undefined- behaviour. + */ +int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev) +{ + unsigned long bmdma = pci_resource_start(pdev, 4); + u8 simplex; + + if (bmdma == 0) + return -ENOENT; + + simplex = inb(bmdma + 0x02); + outb(simplex & 0x60, bmdma + 0x02); + simplex = inb(bmdma + 0x02); + if (simplex & 0x80) + return -EOPNOTSUPP; + return 0; +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex); + +/** + * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host + * @host: target ATA host + * + * Acquire PCI BMDMA resources and initialize @host accordingly. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_pci_bmdma_init(struct ata_host *host) +{ + struct device *gdev = host->dev; + struct pci_dev *pdev = to_pci_dev(gdev); + int i, rc; + + /* No BAR4 allocation: No DMA */ + if (pci_resource_start(pdev, 4) == 0) + return 0; + + /* TODO: If we get no DMA mask we should fall back to PIO */ + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + return rc; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + return rc; + + /* request and iomap DMA region */ + rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev)); + if (rc) { + dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n"); + return -ENOMEM; + } + host->iomap = pcim_iomap_table(pdev); + + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + void __iomem *bmdma = host->iomap[4] + 8 * i; + + if (ata_port_is_dummy(ap)) + continue; + + ap->ioaddr.bmdma_addr = bmdma; + if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) && + (ioread8(bmdma + 2) & 0x80)) + host->flags |= ATA_HOST_SIMPLEX; + + ata_port_desc(ap, "bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 4) + 8 * i); + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_init); + +#endif /* CONFIG_PCI */ diff --git a/include/linux/libata.h b/include/linux/libata.h index bd1b2b49e121..d735728873b5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1619,16 +1619,7 @@ extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc); extern int ata_sff_port_start(struct ata_port *ap); extern int ata_sff_port_start32(struct ata_port *ap); extern void ata_sff_std_ports(struct ata_ioports *ioaddr); -extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev, - unsigned long xfer_mask); -extern void ata_bmdma_setup(struct ata_queued_cmd *qc); -extern void ata_bmdma_start(struct ata_queued_cmd *qc); -extern void ata_bmdma_stop(struct ata_queued_cmd *qc); -extern u8 ata_bmdma_status(struct ata_port *ap); - #ifdef CONFIG_PCI -extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev); -extern int ata_pci_bmdma_init(struct ata_host *host); extern int ata_pci_sff_init_host(struct ata_host *host); extern int ata_pci_sff_prepare_host(struct pci_dev *pdev, const struct ata_port_info * const * ppi, @@ -1641,6 +1632,18 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev, struct scsi_host_template *sht, void *host_priv, int hflags); #endif /* CONFIG_PCI */ +extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev, + unsigned long xfer_mask); +extern void ata_bmdma_setup(struct ata_queued_cmd *qc); +extern void ata_bmdma_start(struct ata_queued_cmd *qc); +extern void ata_bmdma_stop(struct ata_queued_cmd *qc); +extern u8 ata_bmdma_status(struct ata_port *ap); + +#ifdef CONFIG_PCI +extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev); +extern int ata_pci_bmdma_init(struct ata_host *host); +#endif /* CONFIG_PCI */ + /** * ata_sff_busy_wait - Wait for a port status register * @ap: Port to wait for.