leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge 5.9-rc5 into driver-core-next

Browse Source 
We need the driver core changes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2020-09-14 10:08:57 +02:00
commit 9ef8638bd8
1906 changed files with 11037 additions and 7013 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
.clang-format
View File

@ -111,6 +111,7 @@ ForEachMacros:
- 'css_for_each_descendant_pre'
- 'device_for_each_child_node'
- 'dma_fence_chain_for_each'
- 'do_for_each_ftrace_op'
- 'drm_atomic_crtc_for_each_plane'
- 'drm_atomic_crtc_state_for_each_plane'
- 'drm_atomic_crtc_state_for_each_plane_state'
@ -136,6 +137,7 @@ ForEachMacros:
- 'for_each_active_dev_scope'
- 'for_each_active_drhd_unit'
- 'for_each_active_iommu'
- 'for_each_aggr_pgid'
- 'for_each_available_child_of_node'
- 'for_each_bio'
- 'for_each_board_func_rsrc'
@ -234,6 +236,7 @@ ForEachMacros:
- 'for_each_node_state'
- 'for_each_node_with_cpus'
- 'for_each_node_with_property'
- 'for_each_nonreserved_multicast_dest_pgid'
- 'for_each_of_allnodes'
- 'for_each_of_allnodes_from'
- 'for_each_of_cpu_node'
@ -256,6 +259,7 @@ ForEachMacros:
- 'for_each_pci_dev'
- 'for_each_pci_msi_entry'
- 'for_each_pcm_streams'
- 'for_each_physmem_range'
- 'for_each_populated_zone'
- 'for_each_possible_cpu'
- 'for_each_present_cpu'
@ -265,6 +269,8 @@ ForEachMacros:
- 'for_each_process_thread'
- 'for_each_property_of_node'
- 'for_each_registered_fb'
- 'for_each_requested_gpio'
- 'for_each_requested_gpio_in_range'
- 'for_each_reserved_mem_region'
- 'for_each_rtd_codec_dais'
- 'for_each_rtd_codec_dais_rollback'
@ -278,12 +284,17 @@ ForEachMacros:
- 'for_each_sg'
- 'for_each_sg_dma_page'
- 'for_each_sg_page'
- 'for_each_sgtable_dma_page'
- 'for_each_sgtable_dma_sg'
- 'for_each_sgtable_page'
- 'for_each_sgtable_sg'
- 'for_each_sibling_event'
- 'for_each_subelement'
- 'for_each_subelement_extid'
- 'for_each_subelement_id'
- '__for_each_thread'
- 'for_each_thread'
- 'for_each_unicast_dest_pgid'
- 'for_each_wakeup_source'
- 'for_each_zone'
- 'for_each_zone_zonelist'
@ -464,6 +475,7 @@ ForEachMacros:
- 'v4l2_m2m_for_each_src_buf'
- 'v4l2_m2m_for_each_src_buf_safe'
- 'virtio_device_for_each_vq'
- 'while_for_each_ftrace_op'
- 'xa_for_each'
- 'xa_for_each_marked'
- 'xa_for_each_range'

1
.mailmap
View File

@ -308,6 +308,7 @@ Tony Luck <tony.luck@intel.com>
TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>
TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
Tycho Andersen <tycho@tycho.pizza> <tycho@tycho.ws>
Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>

2
Documentation/RCU/lockdep.rst
View File

@ -49,7 +49,7 @@ checking of rcu_dereference() primitives:
is invoked by both RCU-sched readers and updaters.
srcu_dereference_check(p, c):
Use explicit check expression "c" along with
srcu_read_lock_held()(). This is useful in code that
srcu_read_lock_held(). This is useful in code that
is invoked by both SRCU readers and updaters.
rcu_dereference_raw(p):
Don't check. (Use sparingly, if at all.)

2
Documentation/admin-guide/devices.txt
View File

@ -1662,7 +1662,7 @@
98 block User-mode virtual block device
0 = /dev/ubda First user-mode block device
16 = /dev/udbb Second user-mode block device
16 = /dev/ubdb Second user-mode block device
...
Partitions are handled in the same way as for IDE

1
Documentation/admin-guide/dynamic-debug-howto.rst
View File

@ -156,7 +156,6 @@ against. Possible keywords are:::
``line-range`` cannot contain space, e.g.
"1-30" is valid range but "1 - 30" is not.
``module=foo`` combined keyword=value form is interchangably accepted
The meanings of each keyword are:

2
Documentation/admin-guide/laptops/thinkpad-acpi.rst
View File

@ -1434,7 +1434,7 @@ on the feature, restricting the viewing angles.
DYTC Lapmode sensor
------------------
-------------------
sysfs: dytc_lapmode

8
Documentation/admin-guide/pm/intel_pstate.rst
View File

@ -123,7 +123,9 @@ Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
internal P-state selection logic is expected to focus entirely on performance.
This will override the EPP/EPB setting coming from the ``sysfs`` interface
(see `Energy vs Performance Hints`_ below).
(see `Energy vs Performance Hints`_ below). Moreover, any attempts to change
the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this
configuration will be rejected.
Also, in this configuration the range of P-states available to the processor's
internal P-state selection logic is always restricted to the upper boundary
@ -564,8 +566,8 @@ Energy-Performance Preference (EPP) knob (if supported) or its
Energy-Performance Bias (EPB) knob. It is also possible to write a positive
integer value between 0 to 255, if the EPP feature is present. If the EPP
feature is not present, writing integer value to this attribute is not
supported. In this case, user can use
"/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface.
supported. In this case, user can use the
"/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface.
[Note that tasks may by migrated from one CPU to another by the scheduler's
load-balancing algorithm and if different energy vs performance hints are

66
Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
View File

@ -1,66 +0,0 @@
Texas Instruments K3 Interrupt Aggregator
=========================================
The Interrupt Aggregator (INTA) provides a centralized machine
which handles the termination of system events to that they can
be coherently processed by the host(s) in the system. A maximum
of 64 events can be mapped to a single interrupt.
Interrupt Aggregator
+-----------------------------------------+
| Intmap VINT |
| +--------------+ +------------+ |
m ------>| | vint | bit | | 0 |.....|63| vint0 |
. | +--------------+ +------------+ | +------+
. | . . | | HOST |
Globalevents ------>| . . |------>| IRQ |
. | . . | | CTRL |
. | . . | +------+
n ------>| +--------------+ +------------+ |
| | vint | bit | | 0 |.....|63| vintx |
| +--------------+ +------------+ |
| |
+-----------------------------------------+
Configuration of these Intmap registers that maps global events to vint is done
by a system controller (like the Device Memory and Security Controller on K3
AM654 SoC). Driver should request the system controller to get the range
of global events and vints assigned to the requesting host. Management
of these requested resources should be handled by driver and requests
system controller to map specific global event to vint, bit pair.
Communication between the host processor running an OS and the system
controller happens through a protocol called TI System Control Interface
(TISCI protocol). For more details refer:
Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
TISCI Interrupt Aggregator Node:
-------------------------------
- compatible: Must be "ti,sci-inta".
- reg: Should contain registers location and length.
- interrupt-controller: Identifies the node as an interrupt controller
- msi-controller: Identifies the node as an MSI controller.
- interrupt-parent: phandle of irq parent.
- ti,sci: Phandle to TI-SCI compatible System controller node.
- ti,sci-dev-id: TISCI device ID of the Interrupt Aggregator.
- ti,sci-rm-range-vint: Array of TISCI subtype ids representing vints(inta
outputs) range within this INTA, assigned to the
requesting host context.
- ti,sci-rm-range-global-event: Array of TISCI subtype ids representing the
global events range reaching this IA and are assigned
to the requesting host context.
Example:
--------
main_udmass_inta: interrupt-controller@33d00000 {
compatible = "ti,sci-inta";
reg = <0x0 0x33d00000 0x0 0x100000>;
interrupt-controller;
msi-controller;
interrupt-parent = <&main_navss_intr>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <179>;
ti,sci-rm-range-vint = <0x0>;
ti,sci-rm-range-global-event = <0x1>;
};

98
Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml Normal file
View File

@ -0,0 +1,98 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments K3 Interrupt Aggregator
maintainers:
- Lokesh Vutla <lokeshvutla@ti.com>
allOf:
- $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
description: |
The Interrupt Aggregator (INTA) provides a centralized machine
which handles the termination of system events to that they can
be coherently processed by the host(s) in the system. A maximum
of 64 events can be mapped to a single interrupt.
Interrupt Aggregator
+-----------------------------------------+
| Intmap VINT |
| +--------------+ +------------+ |
m ------>| | vint | bit | | 0 |.....|63| vint0 |
. | +--------------+ +------------+ | +------+
. | . . | | HOST |
Globalevents ------>| . . |----->| IRQ |
. | . . | | CTRL |
. | . . | +------+
n ------>| +--------------+ +------------+ |
| | vint | bit | | 0 |.....|63| vintx |
| +--------------+ +------------+ |
| |
+-----------------------------------------+
Configuration of these Intmap registers that maps global events to vint is
done by a system controller (like the Device Memory and Security Controller
on AM654 SoC). Driver should request the system controller to get the range
of global events and vints assigned to the requesting host. Management
of these requested resources should be handled by driver and requests
system controller to map specific global event to vint, bit pair.
Communication between the host processor running an OS and the system
controller happens through a protocol called TI System Control Interface
(TISCI protocol).
properties:
compatible:
const: ti,sci-inta
reg:
maxItems: 1
interrupt-controller: true
msi-controller: true
ti,interrupt-ranges:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
description: |
Interrupt ranges that converts the INTA output hw irq numbers
to parents's input interrupt numbers.
items:
items:
- description: |
"output_irq" specifies the base for inta output irq
- description: |
"parent's input irq" specifies the base for parent irq
- description: |
"limit" specifies the limit for translation
required:
- compatible
- reg
- interrupt-controller
- msi-controller
- ti,sci
- ti,sci-dev-id
- ti,interrupt-ranges
examples:
- |
bus {
#address-cells = <2>;
#size-cells = <2>;
main_udmass_inta: msi-controller@33d00000 {
compatible = "ti,sci-inta";
reg = <0x0 0x33d00000 0x0 0x100000>;
interrupt-controller;
msi-controller;
interrupt-parent = <&main_navss_intr>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <179>;
ti,interrupt-ranges = <0 0 256>;
};
};

82
Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
View File

@ -1,82 +0,0 @@
Texas Instruments K3 Interrupt Router
=====================================
The Interrupt Router (INTR) module provides a mechanism to mux M
interrupt inputs to N interrupt outputs, where all M inputs are selectable
to be driven per N output. An Interrupt Router can either handle edge triggered
or level triggered interrupts and that is fixed in hardware.
Interrupt Router
+----------------------+
| Inputs Outputs |
+-------+ | +------+ +-----+ |
| GPIO |----------->| | irq0 | | 0 | | Host IRQ
+-------+ | +------+ +-----+ | controller
| . . | +-------+
+-------+ | . . |----->| IRQ |
| INTA |----------->| . . | +-------+
+-------+ | . +-----+ |
| +------+ | N | |
| | irqM | +-----+ |
| +------+ |
| |
+----------------------+
There is one register per output (MUXCNTL_N) that controls the selection.
Configuration of these MUXCNTL_N registers is done by a system controller
(like the Device Memory and Security Controller on K3 AM654 SoC). System
controller will keep track of the used and unused registers within the Router.
Driver should request the system controller to get the range of GIC IRQs
assigned to the requesting hosts. It is the drivers responsibility to keep
track of Host IRQs.
Communication between the host processor running an OS and the system
controller happens through a protocol called TI System Control Interface
(TISCI protocol). For more details refer:
Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
TISCI Interrupt Router Node:
----------------------------
Required Properties:
- compatible: Must be "ti,sci-intr".
- ti,intr-trigger-type: Should be one of the following:
1: If intr supports edge triggered interrupts.
4: If intr supports level triggered interrupts.
- interrupt-controller: Identifies the node as an interrupt controller
- #interrupt-cells: Specifies the number of cells needed to encode an
interrupt source. The value should be 2.
First cell should contain the TISCI device ID of source
Second cell should contain the interrupt source offset
within the device.
- ti,sci: Phandle to TI-SCI compatible System controller node.
- ti,sci-dst-id: TISCI device ID of the destination IRQ controller.
- ti,sci-rm-range-girq: Array of TISCI subtype ids representing the host irqs
assigned to this interrupt router. Each subtype id
corresponds to a range of host irqs.
For more details on TISCI IRQ resource management refer:
https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
Example:
--------
The following example demonstrates both interrupt router node and the consumer
node(main gpio) on the AM654 SoC:
main_intr: interrupt-controller0 {
compatible = "ti,sci-intr";
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <56>;
ti,sci-rm-range-girq = <0x1>;
};
main_gpio0: gpio@600000 {
...
interrupt-parent = <&main_intr>;
interrupts = <57 256>, <57 257>, <57 258>,
<57 259>, <57 260>, <57 261>;
...
};

102
Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml Normal file
View File

@ -0,0 +1,102 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments K3 Interrupt Router
maintainers:
- Lokesh Vutla <lokeshvutla@ti.com>
allOf:
- $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
description: |
The Interrupt Router (INTR) module provides a mechanism to mux M
interrupt inputs to N interrupt outputs, where all M inputs are selectable
to be driven per N output. An Interrupt Router can either handle edge
triggered or level triggered interrupts and that is fixed in hardware.
Interrupt Router
+----------------------+
| Inputs Outputs |
+-------+ | +------+ +-----+ |
| GPIO |----------->| | irq0 | | 0 | | Host IRQ
+-------+ | +------+ +-----+ | controller
| . . | +-------+
+-------+ | . . |----->| IRQ |
| INTA |----------->| . . | +-------+
+-------+ | . +-----+ |
| +------+ | N | |
| | irqM | +-----+ |
| +------+ |
| |
+----------------------+
There is one register per output (MUXCNTL_N) that controls the selection.
Configuration of these MUXCNTL_N registers is done by a system controller
(like the Device Memory and Security Controller on K3 AM654 SoC). System
controller will keep track of the used and unused registers within the Router.
Driver should request the system controller to get the range of GIC IRQs
assigned to the requesting hosts. It is the drivers responsibility to keep
track of Host IRQs.
Communication between the host processor running an OS and the system
controller happens through a protocol called TI System Control Interface
(TISCI protocol).
properties:
compatible:
const: ti,sci-intr
ti,intr-trigger-type:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 4]
description: |
Should be one of the following.
1 = If intr supports edge triggered interrupts.
4 = If intr supports level triggered interrupts.
interrupt-controller: true
'#interrupt-cells':
const: 1
description: |
The 1st cell should contain interrupt router input hw number.
ti,interrupt-ranges:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
description: |
Interrupt ranges that converts the INTR output hw irq numbers
to parents's input interrupt numbers.
items:
items:
- description: |
"output_irq" specifies the base for intr output irq
- description: |
"parent's input irq" specifies the base for parent irq
- description: |
"limit" specifies the limit for translation
required:
- compatible
- ti,intr-trigger-type
- interrupt-controller
- '#interrupt-cells'
- ti,sci
- ti,sci-dev-id
- ti,interrupt-ranges
examples:
- |
main_gpio_intr: interrupt-controller0 {
compatible = "ti,sci-intr";
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <131>;
ti,interrupt-ranges = <0 360 32>;
};

10
Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
View File

@ -30,9 +30,13 @@ allOf:
then:
properties:
clock-output-names:
items:
- const: clk_out_sd0
- const: clk_in_sd0
oneOf:
- items:
- const: clk_out_sd0
- const: clk_in_sd0
- items:
- const: clk_out_sd1
- const: clk_in_sd1
properties:
compatible:

2
Documentation/devicetree/bindings/mmc/mtk-sd.txt
View File

@ -50,6 +50,8 @@ Optional properties:
error caused by stop clock(fifo full)
Valid range = [0:0x7]. if not present, default value is 0.
applied to compatible "mediatek,mt2701-mmc".
- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
- reset-names: Should be "hrst".
Examples:
mmc0: mmc@11230000 {

32
Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
View File

@ -15,8 +15,15 @@ Required properties:
- "nvidia,tegra210-sdhci": for Tegra210
- "nvidia,tegra186-sdhci": for Tegra186
- "nvidia,tegra194-sdhci": for Tegra194
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries.
One for the module clock and one for the timeout clock.
For all other Tegra devices, must contain a single entry for
the module clock. See ../clocks/clock-bindings.txt for details.
- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
strings 'sdhci' and 'tmclk' to represent the module and
the timeout clocks, respectively.
For all other Tegra devices must contain the string 'sdhci'
to represent the module clock.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194:
Example:
sdhci@700b0000 {
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
compatible = "nvidia,tegra124-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@ -115,3 +122,22 @@ sdhci@700b0000 {
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
status = "disabled";
};
sdhci@700b0000 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 14>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
pinctrl-0 = <&sdmmc1_3v3>;
pinctrl-1 = <&sdmmc1_1v8>;
nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
status = "disabled";
};

2
Documentation/devicetree/bindings/net/dsa/dsa.txt
View File

@ -1,4 +1,4 @@
Distributed Switch Architecture Device Tree Bindings
----------------------------------------------------
See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documenation.
See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation.

16
Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
View File

@ -23,8 +23,8 @@ Required properties:
- compatible:
Must be one of :
"brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
"brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
"brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on BRCMSTB SoCs
"brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
@ -36,8 +36,8 @@ Required properties:
BRCMSTB SoCs
"brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi" : MSPI+BSPI on Cygnus, NSP
"brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi" : NS2 SoCs
"brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on Cygnus, NSP
"brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi" : NS2 SoCs
- reg:
Define the bases and ranges of the associated I/O address spaces.
@ -86,7 +86,7 @@ BRCMSTB SoC Example:
spi@f03e3400 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-qspi";
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>;
reg-names = "cs_reg", "mspi", "bspi";
interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>;
@ -149,7 +149,7 @@ BRCMSTB SoC Example:
#address-cells = <1>;
#size-cells = <0>;
clocks = <&upg_fixed>;
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-mspi";
compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
reg = <0xf0416000 0x180>;
reg-names = "mspi";
interrupts = <0x14>;
@ -160,7 +160,7 @@ BRCMSTB SoC Example:
iProc SoC Example:
qspi: spi@18027200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x18027200 0x184>,
<0x18027000 0x124>,
<0x1811c408 0x004>,
@ -191,7 +191,7 @@ iProc SoC Example:
NS2 SoC Example:
qspi: spi@66470200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
reg = <0x66470200 0x184>,
<0x66470000 0x124>,
<0x67017408 0x004>,

2
Documentation/driver-api/dma-buf.rst
View File

@ -179,7 +179,7 @@ DMA Fence uABI/Sync File
:internal:
Indefinite DMA Fences
~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
At various times &dma_fence with an indefinite time until dma_fence_wait()
finishes have been proposed. Examples include:

6
Documentation/driver-api/fpga/fpga-bridge.rst
View File

@ -6,9 +6,9 @@ API to implement a new FPGA bridge
* struct :c:type:`fpga_bridge` — The FPGA Bridge structure
* struct :c:type:`fpga_bridge_ops` — Low level Bridge driver ops
* :c:func:`devm_fpga_bridge_create()` — Allocate and init a bridge struct
* :c:func:`fpga_bridge_register()` — Register a bridge
* :c:func:`fpga_bridge_unregister()` — Unregister a bridge
* devm_fpga_bridge_create() — Allocate and init a bridge struct
* fpga_bridge_register() — Register a bridge
* fpga_bridge_unregister() — Unregister a bridge
.. kernel-doc:: include/linux/fpga/fpga-bridge.h
:functions: fpga_bridge

6
Documentation/driver-api/fpga/fpga-mgr.rst
View File

@ -104,9 +104,9 @@ API for implementing a new FPGA Manager driver
* ``fpga_mgr_states`` — Values for :c:member:`fpga_manager->state`.
* struct :c:type:`fpga_manager` — the FPGA manager struct
* struct :c:type:`fpga_manager_ops` — Low level FPGA manager driver ops
* :c:func:`devm_fpga_mgr_create` — Allocate and init a manager struct
* :c:func:`fpga_mgr_register` — Register an FPGA manager
* :c:func:`fpga_mgr_unregister` — Unregister an FPGA manager
* devm_fpga_mgr_create() — Allocate and init a manager struct
* fpga_mgr_register() — Register an FPGA manager
* fpga_mgr_unregister() — Unregister an FPGA manager
.. kernel-doc:: include/linux/fpga/fpga-mgr.h
:functions: fpga_mgr_states

16
Documentation/driver-api/fpga/fpga-programming.rst
View File

@ -6,9 +6,9 @@ Overview
The in-kernel API for FPGA programming is a combination of APIs from
FPGA manager, bridge, and regions. The actual function used to
trigger FPGA programming is :c:func:`fpga_region_program_fpga()`.
trigger FPGA programming is fpga_region_program_fpga().
:c:func:`fpga_region_program_fpga()` uses functionality supplied by
fpga_region_program_fpga() uses functionality supplied by
the FPGA manager and bridges. It will:
* lock the region's mutex
@ -20,8 +20,8 @@ the FPGA manager and bridges. It will:
* release the locks
The struct fpga_image_info specifies what FPGA image to program. It is
allocated/freed by :c:func:`fpga_image_info_alloc()` and freed with
:c:func:`fpga_image_info_free()`
allocated/freed by fpga_image_info_alloc() and freed with
fpga_image_info_free()
How to program an FPGA using a region
-------------------------------------
@ -84,10 +84,10 @@ will generate that list. Here's some sample code of what to do next::
API for programming an FPGA
---------------------------
* :c:func:`fpga_region_program_fpga` — Program an FPGA
* :c:type:`fpga_image_info` — Specifies what FPGA image to program
* :c:func:`fpga_image_info_alloc()` — Allocate an FPGA image info struct
* :c:func:`fpga_image_info_free()` — Free an FPGA image info struct
* fpga_region_program_fpga() — Program an FPGA
* fpga_image_info() — Specifies what FPGA image to program
* fpga_image_info_alloc() — Allocate an FPGA image info struct
* fpga_image_info_free() — Free an FPGA image info struct
.. kernel-doc:: drivers/fpga/fpga-region.c
:functions: fpga_region_program_fpga

18
Documentation/driver-api/fpga/fpga-region.rst
View File

@ -46,18 +46,18 @@ API to add a new FPGA region
----------------------------
* struct :c:type:`fpga_region` — The FPGA region struct
* :c:func:`devm_fpga_region_create` — Allocate and init a region struct
* :c:func:`fpga_region_register` — Register an FPGA region
* :c:func:`fpga_region_unregister` — Unregister an FPGA region
* devm_fpga_region_create() — Allocate and init a region struct
* fpga_region_register() — Register an FPGA region
* fpga_region_unregister() — Unregister an FPGA region
The FPGA region's probe function will need to get a reference to the FPGA
Manager it will be using to do the programming. This usually would happen
during the region's probe function.
* :c:func:`fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count
* :c:func:`of_fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count,
* fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count
* of_fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count,
given a device node.
* :c:func:`fpga_mgr_put` — Put an FPGA manager
* fpga_mgr_put() — Put an FPGA manager
The FPGA region will need to specify which bridges to control while programming
the FPGA. The region driver can build a list of bridges during probe time
@ -66,11 +66,11 @@ the list of bridges to program just before programming
(:c:member:`fpga_region->get_bridges`). The FPGA bridge framework supplies the
following APIs to handle building or tearing down that list.
* :c:func:`fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
* fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
list
* :c:func:`of_fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
* of_fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
list, given a device node
* :c:func:`fpga_bridges_put` — Given a list of bridges, put them
* fpga_bridges_put() — Given a list of bridges, put them
.. kernel-doc:: include/linux/fpga/fpga-region.h
:functions: fpga_region

16
Documentation/driver-api/iio/core.rst
View File

@ -11,10 +11,10 @@ Industrial I/O Devices
----------------------
* struct :c:type:`iio_dev` - industrial I/O device
* :c:func:`iio_device_alloc()` - allocate an :c:type:`iio_dev` from a driver
* :c:func:`iio_device_free()` - free an :c:type:`iio_dev` from a driver
* :c:func:`iio_device_register()` - register a device with the IIO subsystem
* :c:func:`iio_device_unregister()` - unregister a device from the IIO
* iio_device_alloc() - allocate an :c:type:`iio_dev` from a driver
* iio_device_free() - free an :c:type:`iio_dev` from a driver
* iio_device_register() - register a device with the IIO subsystem
* iio_device_unregister() - unregister a device from the IIO
subsystem
An IIO device usually corresponds to a single hardware sensor and it
@ -34,17 +34,17 @@ A typical IIO driver will register itself as an :doc:`I2C <../i2c>` or
At probe:
1. Call :c:func:`iio_device_alloc()`, which allocates memory for an IIO device.
1. Call iio_device_alloc(), which allocates memory for an IIO device.
2. Initialize IIO device fields with driver specific information (e.g.
device name, device channels).
3. Call :c:func:`iio_device_register()`, this registers the device with the
3. Call iio_device_register(), this registers the device with the
IIO core. After this call the device is ready to accept requests from user
space applications.
At remove, we free the resources allocated in probe in reverse order:
1. :c:func:`iio_device_unregister()`, unregister the device from the IIO core.
2. :c:func:`iio_device_free()`, free the memory allocated for the IIO device.
1. iio_device_unregister(), unregister the device from the IIO core.
2. iio_device_free(), free the memory allocated for the IIO device.
IIO device sysfs interface
==========================

2
Documentation/fault-injection/nvme-fault-injection.rst
View File

@ -3,7 +3,7 @@ NVMe Fault Injection
Linux's fault injection framework provides a systematic way to support
error injection via debugfs in the /sys/kernel/debug directory. When
enabled, the default NVME_SC_INVALID_OPCODE with no retry will be
injected into the nvme_end_request. Users can change the default status
injected into the nvme_try_complete_req. Users can change the default status
code and no retry flag via the debugfs. The list of Generic Command
Status can be found in include/linux/nvme.h

16
Documentation/filesystems/affs.rst
View File

@ -110,13 +110,15 @@ The Amiga protection flags RWEDRWEDHSPARWED are handled as follows:
- R maps to r for user, group and others. On directories, R implies x.
- If both W and D are allowed, w will be set.
- W maps to w.
- E maps to x.
- H and P are always retained and ignored under Linux.
- D is ignored.
- A is always reset when a file is written to.
- H, S and P are always retained and ignored under Linux.
- A is cleared when a file is written to.
User id and group id will be used unless set[gu]id are given as mount
options. Since most of the Amiga file systems are single user systems
@ -128,11 +130,13 @@ Linux -> Amiga:
The Linux rwxrwxrwx file mode is handled as follows:
- r permission will set R for user, group and others.
- r permission will allow R for user, group and others.
- w permission will set W and D for user, group and others.
- w permission will allow W for user, group and others.
- x permission of the user will set E for plain files.
- x permission of the user will allow E for plain files.
- D will be allowed for user, group and others.
- All other flags (suid, sgid, ...) are ignored and will
not be retained.

6
Documentation/hwmon/abituguru-datasheet.rst
View File

@ -68,7 +68,7 @@ See below for all known bank addresses, numbers of sensors in that bank,
number of bytes data per sensor and contents/meaning of those bytes.
Although both this document and the kernel driver have kept the sensor
terminoligy for the addressing within a bank this is not 100% correct, in
terminology for the addressing within a bank this is not 100% correct, in
bank 0x24 for example the addressing within the bank selects a PWM output not
a sensor.
@ -155,7 +155,7 @@ After wider testing of the Linux kernel driver some variants of the uGuru have
turned up which do not hold 0x08 at DATA within 250 reads after writing the
bank address. With these versions this happens quite frequent, using larger
timeouts doesn't help, they just go offline for a second or 2, doing some
internal callibration or whatever. Your code should be prepared to handle
internal calibration or whatever. Your code should be prepared to handle
this and in case of no response in this specific case just goto sleep for a
while and then retry.
@ -331,6 +331,6 @@ the voltage / clock programming out, I tried reading and only reading banks
0-0x30 with the reading code used for the sensor banks (0x20-0x28) and this
resulted in a _permanent_ reprogramming of the voltages, luckily I had the
sensors part configured so that it would shutdown my system on any out of spec
voltages which proprably safed my computer (after a reboot I managed to
voltages which probably safed my computer (after a reboot I managed to
immediately enter the bios and reload the defaults). This probably means that
the read/write cycle for the non sensor part is different from the sensor part.

4
Documentation/hwmon/abituguru.rst
View File

@ -17,7 +17,7 @@ Supported chips:
Note:
The uGuru is a microcontroller with onboard firmware which programs
it to behave as a hwmon IC. There are many different revisions of the
firmware and thus effectivly many different revisions of the uGuru.
firmware and thus effectively many different revisions of the uGuru.
Below is an incomplete list with which revisions are used for which
Motherboards:
@ -33,7 +33,7 @@ Supported chips:
sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
this does not always work. For these uGuru's the autodetection can
be overridden with the bank1_types module param. For all 3 known
revison 1 motherboards the correct use of this param is:
revision 1 motherboards the correct use of this param is:
bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
You may also need to specify the fan_sensors option for these boards
fan_sensors=5

4
Documentation/hwmon/abituguru3.rst
View File

@ -13,7 +13,7 @@ Supported chips:
Note:
The uGuru is a microcontroller with onboard firmware which programs
it to behave as a hwmon IC. There are many different revisions of the
firmware and thus effectivly many different revisions of the uGuru.
firmware and thus effectively many different revisions of the uGuru.
Below is an incomplete list with which revisions are used for which
Motherboards:
@ -24,7 +24,7 @@ Supported chips:
- uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
AW9D-MAX)
The abituguru3 driver is only for revison 3.0.x.x motherboards,
The abituguru3 driver is only for revision 3.0.x.x motherboards,
this driver will not work on older motherboards. For older
motherboards use the abituguru (without the 3 !) driver.

26
Documentation/kbuild/llvm.rst
View File

@ -23,8 +23,8 @@ supports C and the GNU C extensions required by the kernel, and is pronounced
Clang
-----
The compiler used can be swapped out via `CC=` command line argument to `make`.
`CC=` should be set when selecting a config and during a build.
The compiler used can be swapped out via ``CC=`` command line argument to ``make``.
``CC=`` should be set when selecting a config and during a build. ::
make CC=clang defconfig
@ -34,33 +34,33 @@ Cross Compiling
---------------
A single Clang compiler binary will typically contain all supported backends,
which can help simplify cross compiling.
which can help simplify cross compiling. ::
ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CC=clang
`CROSS_COMPILE` is not used to prefix the Clang compiler binary, instead
`CROSS_COMPILE` is used to set a command line flag: `--target <triple>`. For
example:
``CROSS_COMPILE`` is not used to prefix the Clang compiler binary, instead
``CROSS_COMPILE`` is used to set a command line flag: ``--target <triple>``. For
example: ::
clang --target aarch64-linux-gnu foo.c
LLVM Utilities
--------------
LLVM has substitutes for GNU binutils utilities. Kbuild supports `LLVM=1`
to enable them.
LLVM has substitutes for GNU binutils utilities. Kbuild supports ``LLVM=1``
to enable them. ::
make LLVM=1
They can be enabled individually. The full list of the parameters:
They can be enabled individually. The full list of the parameters: ::
make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\
READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\
make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \
OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \
READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \
HOSTLD=ld.lld
Currently, the integrated assembler is disabled by default. You can pass
`LLVM_IAS=1` to enable it.
``LLVM_IAS=1`` to enable it.
Getting Help
------------

18
Documentation/kbuild/makefiles.rst
View File

@ -16,7 +16,7 @@ This document describes the Linux kernel Makefiles.
--- 3.5 Library file goals - lib-y
--- 3.6 Descending down in directories
--- 3.7 Compilation flags
--- 3.8 Command line dependency
--- 3.8 <deleted>
--- 3.9 Dependency tracking
--- 3.10 Special Rules
--- 3.11 $(CC) support functions
@ -39,8 +39,8 @@ This document describes the Linux kernel Makefiles.
=== 7 Architecture Makefiles
--- 7.1 Set variables to tweak the build to the architecture
--- 7.2 Add prerequisites to archheaders:
--- 7.3 Add prerequisites to archprepare:
--- 7.2 Add prerequisites to archheaders
--- 7.3 Add prerequisites to archprepare
--- 7.4 List directories to visit when descending
--- 7.5 Architecture-specific boot images
--- 7.6 Building non-kbuild targets
@ -129,7 +129,7 @@ The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can
be used and if both a 'Makefile' and a 'Kbuild' file exists, then the 'Kbuild'
file will be used.
Section 3.1 "Goal definitions" is a quick intro, further chapters provide
Section 3.1 "Goal definitions" is a quick intro; further chapters provide
more details, with real examples.
3.1 Goal definitions
@ -965,7 +965,7 @@ When kbuild executes, the following steps are followed (roughly):
KBUILD_LDFLAGS := -m elf_s390
Note: ldflags-y can be used to further customise
the flags used. See chapter 3.7.
the flags used. See section 3.7.
LDFLAGS_vmlinux
Options for $(LD) when linking vmlinux
@ -1121,7 +1121,7 @@ When kbuild executes, the following steps are followed (roughly):
In this example, the file target maketools will be processed
before descending down in the subdirectories.
See also chapter XXX-TODO that describe how kbuild supports
See also chapter XXX-TODO that describes how kbuild supports
generating offset header files.
@ -1261,7 +1261,7 @@ When kbuild executes, the following steps are followed (roughly):
always be built.
Assignments to $(targets) are without $(obj)/ prefix.
if_changed may be used in conjunction with custom commands as
defined in 6.8 "Custom kbuild commands".
defined in 7.8 "Custom kbuild commands".
Note: It is a typical mistake to forget the FORCE prerequisite.
Another common pitfall is that whitespace is sometimes
@ -1411,7 +1411,7 @@ When kbuild executes, the following steps are followed (roughly):
that may be shared between individual architectures.
The recommended approach how to use a generic header file is
to list the file in the Kbuild file.
See "7.2 generic-y" for further info on syntax etc.
See "8.2 generic-y" for further info on syntax etc.
7.11 Post-link pass
-------------------
@ -1601,4 +1601,4 @@ is the right choice.
- Describe how kbuild supports shipped files with _shipped.
- Generating offset header files.
- Add more variables to section 7?
- Add more variables to chapters 7 or 9?

24
Documentation/locking/locktypes.rst
View File

@ -164,14 +164,14 @@ by disabling preemption or interrupts.
On non-PREEMPT_RT kernels local_lock operations map to the preemption and
interrupt disabling and enabling primitives:
=========================== ======================
local_lock(&llock) preempt_disable()
local_unlock(&llock) preempt_enable()
local_lock_irq(&llock) local_irq_disable()
local_unlock_irq(&llock) local_irq_enable()
local_lock_save(&llock) local_irq_save()
local_lock_restore(&llock) local_irq_save()
=========================== ======================
=============================== ======================
local_lock(&llock) preempt_disable()
local_unlock(&llock) preempt_enable()
local_lock_irq(&llock) local_irq_disable()
local_unlock_irq(&llock) local_irq_enable()
local_lock_irqsave(&llock) local_irq_save()
local_unlock_irqrestore(&llock) local_irq_restore()
=============================== ======================
The named scope of local_lock has two advantages over the regular
primitives:
@ -353,14 +353,14 @@ protection scope. So the following substitution is wrong::
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock_1, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_1, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_1, flags);
}
func2()
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock_2, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_2, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_2, flags);
}
func3()
@ -379,14 +379,14 @@ PREEMPT_RT-specific semantics of spinlock_t. The correct substitution is::
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
}
func2()
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
}
func3()

1
Documentation/maintainer/maintainer-entry-profile.rst
View File

@ -101,3 +101,4 @@ to do something different in the near future.
../doc-guide/maintainer-profile
../nvdimm/maintainer-entry-profile
../riscv/patch-acceptance

2
Documentation/networking/dsa/configuration.rst
View File

@ -180,7 +180,7 @@ The configuration can only be set up via VLAN tagging and bridge setup.
# bring up the slave interfaces
ip link set lan1 up
ip link set lan1 up
ip link set lan2 up
ip link set lan3 up
# create bridge

4
Documentation/powerpc/syscall64-abi.rst
View File

@ -49,16 +49,18 @@ Register preservation rules
Register preservation rules match the ELF ABI calling sequence with the
following differences:
=========== ============= ========================================
--- For the sc instruction, differences with the ELF ABI ---
=========== ============= ========================================
r0 Volatile (System call number.)
r3 Volatile (Parameter 1, and return value.)
r4-r8 Volatile (Parameters 2-6.)
cr0 Volatile (cr0.SO is the return error condition.)
cr1, cr5-7 Nonvolatile
lr Nonvolatile
=========== ============= ========================================
--- For the scv 0 instruction, differences with the ELF ABI ---
=========== ============= ========================================
r0 Volatile (System call number.)
r3 Volatile (Parameter 1, and return value.)
r4-r8 Volatile (Parameters 2-6.)

2
Documentation/process/deprecated.rst
View File

@ -142,7 +142,7 @@ only NUL-terminated strings. The safe replacement is strscpy().
(Users of strscpy() still needing NUL-padding should instead
use strscpy_pad().)
If a caller is using non-NUL-terminated strings, strncpy()() can
If a caller is using non-NUL-terminated strings, strncpy() can
still be used, but destinations should be marked with the `__nonstring
<https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
attribute to avoid future compiler warnings.

2
Documentation/sound/cards/audigy-mixer.rst
View File

@ -332,7 +332,7 @@ WO 9901953 (A1)
US Patents (https://www.uspto.gov/)
----------------------------------
-----------------------------------
US 5925841
Digital Sampling Instrument employing cache memory (Jul. 20, 1999)

2
Documentation/sound/cards/sb-live-mixer.rst
View File

@ -337,7 +337,7 @@ WO 9901953 (A1)
US Patents (https://www.uspto.gov/)
----------------------------------
-----------------------------------
US 5925841
Digital Sampling Instrument employing cache memory (Jul. 20, 1999)

2
Documentation/sound/designs/timestamping.rst
View File

@ -143,7 +143,7 @@ timestamp shows when the information is put together by the driver
before returning from the ``STATUS`` and ``STATUS_EXT`` ioctl. in most cases
this driver_timestamp will be identical to the regular system tstamp.
Examples of typestamping with HDaudio:
Examples of timestamping with HDAudio:
1. DMA timestamp, no compensation for DMA+analog delay
::

2
Documentation/translations/it_IT/process/deprecated.rst
View File

@ -130,7 +130,7 @@ chi usa solo stringe terminate. La versione sicura da usare è
strscpy(). (chi usa strscpy() e necessita di estendere la
terminazione con NUL deve aggiungere una chiamata a memset())
Se il chiamate no usa stringhe terminate con NUL, allore strncpy()()
Se il chiamate no usa stringhe terminate con NUL, allore strncpy()
può continuare ad essere usata, ma i buffer di destinazione devono essere
marchiati con l'attributo `__nonstring <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
per evitare avvisi durante la compilazione.

22
Documentation/virt/kvm/api.rst
View File

@ -6130,7 +6130,7 @@ HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx.
8.21 KVM_CAP_HYPERV_DIRECT_TLBFLUSH
-----------------------------------
:Architecture: x86
:Architectures: x86
This capability indicates that KVM running on top of Hyper-V hypervisor
enables Direct TLB flush for its guests meaning that TLB flush
@ -6143,19 +6143,33 @@ in CPUID and only exposes Hyper-V identification. In this case, guest
thinks it's running on Hyper-V and only use Hyper-V hypercalls.
8.22 KVM_CAP_S390_VCPU_RESETS
-----------------------------
Architectures: s390
:Architectures: s390
This capability indicates that the KVM_S390_NORMAL_RESET and
KVM_S390_CLEAR_RESET ioctls are available.
8.23 KVM_CAP_S390_PROTECTED
---------------------------
Architecture: s390
:Architectures: s390
This capability indicates that the Ultravisor has been initialized and
KVM can therefore start protected VMs.
This capability governs the KVM_S390_PV_COMMAND ioctl and the
KVM_MP_STATE_LOAD MP_STATE. KVM_SET_MP_STATE can fail for protected
guests when the state change is invalid.
8.24 KVM_CAP_STEAL_TIME
-----------------------
:Architectures: arm64, x86
This capability indicates that KVM supports steal time accounting.
When steal time accounting is supported it may be enabled with
architecture-specific interfaces. This capability and the architecture-
specific interfaces must be consistent, i.e. if one says the feature
is supported, than the other should as well and vice versa. For arm64
see Documentation/virt/kvm/devices/vcpu.rst "KVM_ARM_VCPU_PVTIME_CTRL".
For x86 see Documentation/virt/kvm/msr.rst "MSR_KVM_STEAL_TIME".

85
MAINTAINERS
View File

@ -1694,7 +1694,6 @@ F: arch/arm/mach-cns3xxx/
ARM/CAVIUM THUNDER NETWORK DRIVER
M: Sunil Goutham <sgoutham@marvell.com>
M: Robert Richter <rrichter@marvell.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/net/ethernet/cavium/thunder/
@ -3205,6 +3204,7 @@ S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
F: block/
F: drivers/block/
F: include/linux/blk*
F: kernel/trace/blktrace.c
F: lib/sbitmap.c
@ -3388,6 +3388,7 @@ M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
L: openwrt-devel@lists.openwrt.org (subscribers-only)
S: Supported
F: Documentation/devicetree/bindings/net/dsa/b53.txt
F: drivers/net/dsa/b53/*
F: include/linux/platform_data/b53.h
@ -3573,13 +3574,28 @@ L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/phy/broadcom/phy-brcm-usb*
BROADCOM ETHERNET PHY DRIVERS
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
L: netdev@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
F: drivers/net/phy/bcm*.[ch]
F: drivers/net/phy/broadcom.c
F: include/linux/brcmphy.h
BROADCOM GENET ETHERNET DRIVER
M: Doug Berger <opendmb@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
L: netdev@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
F: Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
F: drivers/net/ethernet/broadcom/genet/
F: drivers/net/mdio/mdio-bcm-unimac.c
F: include/linux/platform_data/bcmgenet.h
F: include/linux/platform_data/mdio-bcm-unimac.h
BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
@ -3931,8 +3947,8 @@ W: https://wireless.wiki.kernel.org/en/users/Drivers/carl9170
F: drivers/net/wireless/ath/carl9170/
CAVIUM I2C DRIVER
M: Robert Richter <rrichter@marvell.com>
S: Supported
M: Robert Richter <rric@kernel.org>
S: Odd Fixes
W: http://www.marvell.com
F: drivers/i2c/busses/i2c-octeon*
F: drivers/i2c/busses/i2c-thunderx*
@ -3947,8 +3963,8 @@ W: http://www.marvell.com
F: drivers/net/ethernet/cavium/liquidio/
CAVIUM MMC DRIVER
M: Robert Richter <rrichter@marvell.com>
S: Supported
M: Robert Richter <rric@kernel.org>
S: Odd Fixes
W: http://www.marvell.com
F: drivers/mmc/host/cavium*
@ -3960,9 +3976,9 @@ W: http://www.marvell.com
F: drivers/crypto/cavium/cpt/
CAVIUM THUNDERX2 ARM64 SOC
M: Robert Richter <rrichter@marvell.com>
M: Robert Richter <rric@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
S: Odd Fixes
F: Documentation/devicetree/bindings/arm/cavium-thunder2.txt
F: arch/arm64/boot/dts/cavium/thunder2-99xx*
@ -4241,6 +4257,8 @@ S: Maintained
F: .clang-format
CLANG/LLVM BUILD SUPPORT
M: Nathan Chancellor <natechancellor@gmail.com>
M: Nick Desaulniers <ndesaulniers@google.com>
L: clang-built-linux@googlegroups.com
S: Supported
W: https://clangbuiltlinux.github.io/
@ -5245,6 +5263,7 @@ DOCUMENTATION
M: Jonathan Corbet <corbet@lwn.net>
L: linux-doc@vger.kernel.org
S: Maintained
P: Documentation/doc-guide/maintainer-profile.rst
T: git git://git.lwn.net/linux.git docs-next
F: Documentation/
F: scripts/documentation-file-ref-check
@ -6179,16 +6198,15 @@ F: drivers/edac/highbank*
EDAC-CAVIUM OCTEON
M: Ralf Baechle <ralf@linux-mips.org>
M: Robert Richter <rrichter@marvell.com>
L: linux-edac@vger.kernel.org
L: linux-mips@vger.kernel.org
S: Supported
F: drivers/edac/octeon_edac*
EDAC-CAVIUM THUNDERX
M: Robert Richter <rrichter@marvell.com>
M: Robert Richter <rric@kernel.org>
L: linux-edac@vger.kernel.org
S: Supported
S: Odd Fixes
F: drivers/edac/thunderx_edac*
EDAC-CORE
@ -6196,7 +6214,7 @@ M: Borislav Petkov <bp@alien8.de>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
M: Tony Luck <tony.luck@intel.com>
R: James Morse <james.morse@arm.com>
R: Robert Richter <rrichter@marvell.com>
R: Robert Richter <rric@kernel.org>
L: linux-edac@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras.git edac-for-next
@ -6500,7 +6518,6 @@ F: net/bridge/
ETHERNET PHY LIBRARY
M: Andrew Lunn <andrew@lunn.ch>
M: Florian Fainelli <f.fainelli@gmail.com>
M: Heiner Kallweit <hkallweit1@gmail.com>
R: Russell King <linux@armlinux.org.uk>
L: netdev@vger.kernel.org
@ -6890,6 +6907,14 @@ L: linuxppc-dev@lists.ozlabs.org
S: Maintained
F: drivers/dma/fsldma.*
FREESCALE DSPI DRIVER
M: Vladimir Oltean <olteanv@gmail.com>
L: linux-spi@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
F: drivers/spi/spi-fsl-dspi.c
F: include/linux/spi/spi-fsl-dspi.h
FREESCALE ENETC ETHERNET DRIVERS
M: Claudiu Manoil <claudiu.manoil@nxp.com>
L: netdev@vger.kernel.org
@ -8261,7 +8286,7 @@ IA64 (Itanium) PLATFORM
M: Tony Luck <tony.luck@intel.com>
M: Fenghua Yu <fenghua.yu@intel.com>
L: linux-ia64@vger.kernel.org
S: Maintained
S: Odd Fixes
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git
F: Documentation/ia64/
F: arch/ia64/
@ -9781,7 +9806,7 @@ F: drivers/scsi/53c700*
LEAKING_ADDRESSES
M: Tobin C. Harding <me@tobin.cc>
M: Tycho Andersen <tycho@tycho.ws>
M: Tycho Andersen <tycho@tycho.pizza>
L: kernel-hardening@lists.openwall.com
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks.git
@ -13435,10 +13460,10 @@ F: Documentation/devicetree/bindings/pci/axis,artpec*
F: drivers/pci/controller/dwc/*artpec*
PCIE DRIVER FOR CAVIUM THUNDERX
M: Robert Richter <rrichter@marvell.com>
M: Robert Richter <rric@kernel.org>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
S: Odd Fixes
F: drivers/pci/controller/pci-thunder-*
PCIE DRIVER FOR HISILICON
@ -13575,12 +13600,18 @@ F: kernel/events/*
F: tools/lib/perf/
F: tools/perf/
PERFORMANCE EVENTS SUBSYSTEM ARM64 PMU EVENTS
PERFORMANCE EVENTS TOOLING ARM64
R: John Garry <john.garry@huawei.com>
R: Will Deacon <will@kernel.org>
R: Mathieu Poirier <mathieu.poirier@linaro.org>
R: Leo Yan <leo.yan@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: tools/build/feature/test-libopencsd.c
F: tools/perf/arch/arm*/
F: tools/perf/pmu-events/arch/arm64/
F: tools/perf/util/arm-spe*
F: tools/perf/util/cs-etm*
PERSONALITY HANDLING
M: Christoph Hellwig <hch@infradead.org>
@ -14371,7 +14402,7 @@ M: Rob Clark <robdclark@gmail.com>
L: iommu@lists.linux-foundation.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/iommu/qcom_iommu.c
F: drivers/iommu/arm/arm-smmu/qcom_iommu.c
QUALCOMM IPCC MAILBOX DRIVER
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
@ -15552,6 +15583,7 @@ F: include/uapi/linux/sed*
SECURITY CONTACT
M: Security Officers <security@kernel.org>
S: Supported
F: Documentation/admin-guide/security-bugs.rst
SECURITY SUBSYSTEM
M: James Morris <jmorris@namei.org>
@ -17122,8 +17154,8 @@ S: Maintained
F: Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt
F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
F: drivers/clk/keystone/sci-clk.c
@ -17220,8 +17252,8 @@ S: Maintained
F: drivers/net/thunderbolt.c
THUNDERX GPIO DRIVER
M: Robert Richter <rrichter@marvell.com>
S: Maintained
M: Robert Richter <rric@kernel.org>
S: Odd Fixes
F: drivers/gpio/gpio-thunderx.c
TI AM437X VPFE DRIVER
@ -18880,6 +18912,15 @@ S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
F: arch/x86/platform
X86 PLATFORM UV HPE SUPERDOME FLEX
M: Steve Wahl <steve.wahl@hpe.com>
R: Dimitri Sivanich <dimitri.sivanich@hpe.com>
R: Russ Anderson <russ.anderson@hpe.com>
S: Supported
F: arch/x86/include/asm/uv/
F: arch/x86/kernel/apic/x2apic_uv_x.c
F: arch/x86/platform/uv/
X86 VDSO
M: Andy Lutomirski <luto@kernel.org>
L: linux-kernel@vger.kernel.org

6
Makefile
View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc5
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*
@ -882,10 +882,6 @@ KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
LDFLAGS_vmlinux += --gc-sections
endif
ifdef CONFIG_LIVEPATCH
KBUILD_CFLAGS += $(call cc-option, -flive-patching=inline-clone)
endif
ifdef CONFIG_SHADOW_CALL_STACK
CC_FLAGS_SCS := -fsanitize=shadow-call-stack
KBUILD_CFLAGS += $(CC_FLAGS_SCS)

2
arch/alpha/kernel/module.c
View File

@ -212,7 +212,7 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
STO_ALPHA_STD_GPLOAD)
/* Omit the prologue. */
value += 8;
/* FALLTHRU */
fallthrough;
case R_ALPHA_BRADDR:
value -= (u64)location + 4;
if (value & 3)

2
arch/alpha/kernel/signal.c
View File

@ -453,7 +453,7 @@ syscall_restart(unsigned long r0, unsigned long r19,
regs->r0 = EINTR;
break;
}
/* fallthrough */
fallthrough;
case ERESTARTNOINTR:
regs->r0 = r0; /* reset v0 and a3 and replay syscall */
regs->r19 = r19;

4
arch/alpha/kernel/traps.c
View File

@ -883,7 +883,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
case 0x26: /* sts */
fake_reg = s_reg_to_mem(alpha_read_fp_reg(reg));
/* FALLTHRU */
fallthrough;
case 0x2c: /* stl */
__asm__ __volatile__(
@ -911,7 +911,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
case 0x27: /* stt */
fake_reg = alpha_read_fp_reg(reg);
/* FALLTHRU */
fallthrough;
case 0x2d: /* stq */
__asm__ __volatile__(

6
arch/arc/boot/dts/hsdk.dts
View File

@ -88,6 +88,8 @@
arcpct: pct {
compatible = "snps,archs-pct";
interrupt-parent = <&cpu_intc>;
interrupts = <20>;
};
/* TIMER0 with interrupt for clockevent */
@ -208,7 +210,7 @@
reg = <0x8000 0x2000>;
interrupts = <10>;
interrupt-names = "macirq";
phy-mode = "rgmii";
phy-mode = "rgmii-id";
snps,pbl = <32>;
snps,multicast-filter-bins = <256>;
clocks = <&gmacclk>;
@ -226,7 +228,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
reg = <0>;
};
};

4
arch/arc/include/asm/pgalloc.h
View File

@ -18,10 +18,10 @@
* vineetg: April 2010
* -Switched pgtable_t from being struct page * to unsigned long
* =Needed so that Page Table allocator (pte_alloc_one) is not forced to
* to deal with struct page. Thay way in future we can make it allocate
* deal with struct page. That way in future we can make it allocate
* multiple PG Tbls in one Page Frame
* =sweet side effect is avoiding calls to ugly page_address( ) from the
* pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate
* pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate)
*
* Amit Bhor, Sameer Dhavale: Codito Technologies 2004
*/

2
arch/arc/kernel/disasm.c
View File

@ -339,7 +339,7 @@ void __kprobes disasm_instr(unsigned long addr, struct disasm_state *state,
case op_LDWX_S: /* LDWX_S c, [b, u6] */
state->x = 1;
/* intentional fall-through */
fallthrough;
case op_LDW_S: /* LDW_S c, [b, u6] */
state->zz = 2;

14
arch/arc/kernel/perf_event.c
View File

@ -562,7 +562,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
{
struct arc_reg_pct_build pct_bcr;
struct arc_reg_cc_build cc_bcr;
int i, has_interrupts;
int i, has_interrupts, irq;
int counter_size; /* in bits */
union cc_name {
@ -637,13 +637,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
.attr_groups = arc_pmu->attr_groups,
};
if (has_interrupts) {
int irq = platform_get_irq(pdev, 0);
if (irq < 0) {
pr_err("Cannot get IRQ number for the platform\n");
return -ENODEV;
}
if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
arc_pmu->irq = irq;
@ -652,9 +646,9 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
this_cpu_ptr(&arc_pmu_cpu));
on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
} else
} else {
arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
}
/*
* perf parser doesn't really like '-' symbol in events name, so let's

2
arch/arc/kernel/signal.c
View File

@ -321,7 +321,7 @@ static void arc_restart_syscall(struct k_sigaction *ka, struct pt_regs *regs)
regs->r0 = -EINTR;
break;
}
/* fallthrough */
fallthrough;
case -ERESTARTNOINTR:
/*

77
arch/arc/kernel/troubleshoot.c
View File

@ -18,44 +18,37 @@
#define ARC_PATH_MAX 256
/*
* Common routine to print scratch regs (r0-r12) or callee regs (r13-r25)
* -Prints 3 regs per line and a CR.
* -To continue, callee regs right after scratch, special handling of CR
*/
static noinline void print_reg_file(long *reg_rev, int start_num)
static noinline void print_regs_scratch(struct pt_regs *regs)
{
unsigned int i;
char buf[512];
int n = 0, len = sizeof(buf);
pr_cont("BTA: 0x%08lx\n SP: 0x%08lx FP: 0x%08lx BLK: %pS\n",
regs->bta, regs->sp, regs->fp, (void *)regs->blink);
pr_cont("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
regs->lp_start, regs->lp_end, regs->lp_count);
for (i = start_num; i < start_num + 13; i++) {
n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t",
i, (unsigned long)*reg_rev);
if (((i + 1) % 3) == 0)
n += scnprintf(buf + n, len - n, "\n");
/* because pt_regs has regs reversed: r12..r0, r25..r13 */
if (is_isa_arcv2() && start_num == 0)
reg_rev++;
else
reg_rev--;
}
if (start_num != 0)
n += scnprintf(buf + n, len - n, "\n\n");
/* To continue printing callee regs on same line as scratch regs */
if (start_num == 0)
pr_info("%s", buf);
else
pr_cont("%s\n", buf);
pr_info("r00: 0x%08lx\tr01: 0x%08lx\tr02: 0x%08lx\n" \
"r03: 0x%08lx\tr04: 0x%08lx\tr05: 0x%08lx\n" \
"r06: 0x%08lx\tr07: 0x%08lx\tr08: 0x%08lx\n" \
"r09: 0x%08lx\tr10: 0x%08lx\tr11: 0x%08lx\n" \
"r12: 0x%08lx\t",
regs->r0, regs->r1, regs->r2,
regs->r3, regs->r4, regs->r5,
regs->r6, regs->r7, regs->r8,
regs->r9, regs->r10, regs->r11,
regs->r12);
}
static void show_callee_regs(struct callee_regs *cregs)
static void print_regs_callee(struct callee_regs *regs)
{
print_reg_file(&(cregs->r13), 13);
pr_cont("r13: 0x%08lx\tr14: 0x%08lx\n" \
"r15: 0x%08lx\tr16: 0x%08lx\tr17: 0x%08lx\n" \
"r18: 0x%08lx\tr19: 0x%08lx\tr20: 0x%08lx\n" \
"r21: 0x%08lx\tr22: 0x%08lx\tr23: 0x%08lx\n" \
"r24: 0x%08lx\tr25: 0x%08lx\n",
regs->r13, regs->r14,
regs->r15, regs->r16, regs->r17,
regs->r18, regs->r19, regs->r20,
regs->r21, regs->r22, regs->r23,
regs->r24, regs->r25);
}
static void print_task_path_n_nm(struct task_struct *tsk)
@ -175,7 +168,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
void show_regs(struct pt_regs *regs)
{
struct task_struct *tsk = current;
struct callee_regs *cregs;
struct callee_regs *cregs = (struct callee_regs *)tsk->thread.callee_reg;
/*
* generic code calls us with preemption disabled, but some calls
@ -204,25 +197,15 @@ void show_regs(struct pt_regs *regs)
STS_BIT(regs, A2), STS_BIT(regs, A1),
STS_BIT(regs, E2), STS_BIT(regs, E1));
#else
pr_cont(" [%2s%2s%2s%2s]",
pr_cont(" [%2s%2s%2s%2s] ",
STS_BIT(regs, IE),
(regs->status32 & STATUS_U_MASK) ? "U " : "K ",
STS_BIT(regs, DE), STS_BIT(regs, AE));
#endif
pr_cont(" BTA: 0x%08lx\n SP: 0x%08lx FP: 0x%08lx BLK: %pS\n",
regs->bta, regs->sp, regs->fp, (void *)regs->blink);
pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
regs->lp_start, regs->lp_end, regs->lp_count);
/* print regs->r0 thru regs->r12
* Sequential printing was generating horrible code
*/
print_reg_file(&(regs->r0), 0);
/* If Callee regs were saved, display them too */
cregs = (struct callee_regs *)current->thread.callee_reg;
print_regs_scratch(regs);
if (cregs)
show_callee_regs(cregs);
print_regs_callee(cregs);
preempt_disable();
}

6
arch/arc/kernel/unwind.c
View File

@ -572,7 +572,7 @@ static unsigned long read_pointer(const u8 **pLoc, const void *end,
#else
BUILD_BUG_ON(sizeof(u32) != sizeof(value));
#endif
/* Fall through */
fallthrough;
case DW_EH_PE_native:
if (end < (const void *)(ptr.pul + 1))
return 0;
@ -827,7 +827,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
case DW_CFA_def_cfa:
state->cfa.reg = get_uleb128(&ptr.p8, end);
unw_debug("cfa_def_cfa: r%lu ", state->cfa.reg);
/* fall through */
fallthrough;
case DW_CFA_def_cfa_offset:
state->cfa.offs = get_uleb128(&ptr.p8, end);
unw_debug("cfa_def_cfa_offset: 0x%lx ",
@ -835,7 +835,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
break;
case DW_CFA_def_cfa_sf:
state->cfa.reg = get_uleb128(&ptr.p8, end);
/* fall through */
fallthrough;
case DW_CFA_def_cfa_offset_sf:
state->cfa.offs = get_sleb128(&ptr.p8, end)
* state->dataAlign;

27
arch/arc/mm/init.c
View File

@ -26,8 +26,8 @@ static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
static unsigned long min_high_pfn, max_high_pfn;
static u64 high_mem_start;
static u64 high_mem_sz;
static phys_addr_t high_mem_start;
static phys_addr_t high_mem_sz;
#endif
#ifdef CONFIG_DISCONTIGMEM
@ -69,6 +69,7 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
high_mem_sz = size;
in_use = 1;
memblock_add_node(base, size, 1);
memblock_reserve(base, size);
#endif
}
@ -157,7 +158,7 @@ void __init setup_arch_memory(void)
min_high_pfn = PFN_DOWN(high_mem_start);
max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
@ -166,6 +167,17 @@ void __init setup_arch_memory(void)
free_area_init(max_zone_pfn);
}
static void __init highmem_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long tmp;
memblock_free(high_mem_start, high_mem_sz);
for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
}
/*
* mem_init - initializes memory
*
@ -174,14 +186,7 @@ void __init setup_arch_memory(void)
*/
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long tmp;
reset_all_zones_managed_pages();
for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
memblock_free_all();
highmem_init();
mem_init_print_info(NULL);
}

1
arch/arc/plat-eznps/include/plat/ctop.h
View File

@ -33,7 +33,6 @@
#define CTOP_AUX_DPC (CTOP_AUX_BASE + 0x02C)
#define CTOP_AUX_LPC (CTOP_AUX_BASE + 0x030)
#define CTOP_AUX_EFLAGS (CTOP_AUX_BASE + 0x080)
#define CTOP_AUX_IACK (CTOP_AUX_BASE + 0x088)
#define CTOP_AUX_GPA1 (CTOP_AUX_BASE + 0x08C)
#define CTOP_AUX_UDMC (CTOP_AUX_BASE + 0x300)

2
arch/arm/boot/dts/bcm-hr2.dtsi
View File

@ -217,7 +217,7 @@
};
qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
<0x11c408 0x004>,

2
arch/arm/boot/dts/bcm-nsp.dtsi
View File

@ -284,7 +284,7 @@
};
qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
<0x11c408 0x004>,

2
arch/arm/boot/dts/bcm5301x.dtsi
View File

@ -488,7 +488,7 @@
};
spi@18029200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x18029200 0x184>,
<0x18029000 0x124>,
<0x1811b408 0x004>,

2
arch/arm/boot/dts/imx6q-logicpd.dts
View File

@ -13,7 +13,7 @@
backlight: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm3 0 20000>;
pwms = <&pwm3 0 20000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&reg_lcd>;

2
arch/arm/boot/dts/imx6q-prtwd2.dts
View File

@ -30,7 +30,7 @@
};
/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
i2c@4 {
i2c {
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;

2
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
View File

@ -22,8 +22,6 @@
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
user-pb {
label = "user_pb";

2
arch/arm/boot/dts/imx6sx-pinfunc.h
View File

@ -1026,7 +1026,7 @@
#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15 0x01B0 0x04F8 0x0000 0x7 0x0
#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x01B4 0x04FC 0x0000 0x0 0x0
#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x01B4 0x04FC 0x0840 0x1 0x4
#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x0 0x0
#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x1 0x0
#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK 0x01B4 0x04FC 0x0730 0x2 0x1
#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK 0x01B4 0x04FC 0x0780 0x3 0x2
#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16 0x01B4 0x04FC 0x06DC 0x4 0x1

2
arch/arm/boot/dts/imx7d-zii-rmu2.dts
View File

@ -58,7 +58,7 @@
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&fec1_phy>;
status = "okay";

8
arch/arm/boot/dts/imx7ulp.dtsi
View File

@ -394,7 +394,7 @@
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLC>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 0 32>;
gpio-ranges = <&iomuxc1 0 0 20>;
};
gpio_ptd: gpio@40af0000 {
@ -408,7 +408,7 @@
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLD>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 32 32>;
gpio-ranges = <&iomuxc1 0 32 12>;
};
gpio_pte: gpio@40b00000 {
@ -422,7 +422,7 @@
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLE>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 64 32>;
gpio-ranges = <&iomuxc1 0 64 16>;
};
gpio_ptf: gpio@40b10000 {
@ -436,7 +436,7 @@
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLF>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 96 32>;
gpio-ranges = <&iomuxc1 0 96 20>;
};
};

29
arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
View File

@ -51,6 +51,8 @@
&mcbsp2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
};
&charger {
@ -102,35 +104,18 @@
regulator-max-microvolt = <3300000>;
};
lcd0: display@0 {
compatible = "panel-dpi";
label = "28";
status = "okay";
/* default-on; */
lcd0: display {
/* This isn't the exact LCD, but the timings meet spec */
compatible = "logicpd,type28";
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_pin>;
enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
backlight = <&bl>;
enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
panel-timing {
clock-frequency = <9000000>;
hactive = <480>;
vactive = <272>;
hfront-porch = <3>;
hback-porch = <2>;
hsync-len = <42>;
vback-porch = <3>;
vfront-porch = <2>;
vsync-len = <11>;
hsync-active = <1>;
vsync-active = <1>;
de-active = <1>;
pixelclk-active = <0>;
};
};
bl: backlight {

2
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
View File

@ -81,6 +81,8 @@
};
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
status = "okay";
};

2
arch/arm/boot/dts/ls1021a.dtsi
View File

@ -182,7 +182,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x1550000 0x0 0x10000>,
<0x0 0x40000000 0x0 0x40000000>;
<0x0 0x40000000 0x0 0x20000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";

20
arch/arm/boot/dts/omap5.dtsi
View File

@ -488,11 +488,11 @@
};
};
target-module@5000 {
target-module@4000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x5000 0x4>,
<0x5010 0x4>,
<0x5014 0x4>;
reg = <0x4000 0x4>,
<0x4010 0x4>,
<0x4014 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@ -504,7 +504,7 @@
ti,syss-mask = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5000 0x1000>;
ranges = <0 0x4000 0x1000>;
dsi1: encoder@0 {
compatible = "ti,omap5-dsi";
@ -514,8 +514,9 @@
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
clock-names = "fck";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
clock-names = "fck", "sys_clk";
};
};
@ -545,8 +546,9 @@
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
clock-names = "fck";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
clock-names = "fck", "sys_clk";
};
};

2
arch/arm/boot/dts/socfpga_arria10.dtsi
View File

@ -821,7 +821,7 @@
timer3: timer3@ffd00100 {
compatible = "snps,dw-apb-timer";
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd01000 0x100>;
reg = <0xffd00100 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
resets = <&rst L4SYSTIMER1_RESET>;

2
arch/arm/boot/dts/vfxxx.dtsi
View File

@ -495,7 +495,7 @@
};
ocotp: ocotp@400a5000 {
compatible = "fsl,vf610-ocotp";
compatible = "fsl,vf610-ocotp", "syscon";
reg = <0x400a5000 0x1000>;
clocks = <&clks VF610_CLK_OCOTP>;
};

16
arch/arm/configs/integrator_defconfig
View File

@ -1,13 +1,11 @@
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
@ -15,19 +13,17 @@ CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
CONFIG_INTEGRATOR_IMPD1=y
CONFIG_ARCH_INTEGRATOR_CP=y
CONFIG_PCI=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPUFREQ_DT=y
CONFIG_CMA=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -37,6 +33,7 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_PCI=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
@ -52,9 +49,12 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_E100=y
CONFIG_SMC91X=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_DRM=y
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y

10
arch/arm/kernel/hw_breakpoint.c
View File

@ -547,7 +547,7 @@ static int arch_build_bp_info(struct perf_event *bp,
if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE)
&& max_watchpoint_len >= 8)
break;
/* Else, fall through */
fallthrough;
default:
return -EINVAL;
}
@ -612,12 +612,12 @@ int hw_breakpoint_arch_parse(struct perf_event *bp,
/* Allow halfword watchpoints and breakpoints. */
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
break;
/* Else, fall through */
fallthrough;
case 3:
/* Allow single byte watchpoint. */
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
break;
/* Else, fall through */
fallthrough;
default:
ret = -EINVAL;
goto out;
@ -884,7 +884,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
break;
case ARM_ENTRY_ASYNC_WATCHPOINT:
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
/* Fall through */
fallthrough;
case ARM_ENTRY_SYNC_WATCHPOINT:
watchpoint_handler(addr, fsr, regs);
break;
@ -933,7 +933,7 @@ static bool core_has_os_save_restore(void)
ARM_DBG_READ(c1, c1, 4, oslsr);
if (oslsr & ARM_OSLSR_OSLM0)
return true;
/* Else, fall through */
fallthrough;
default:
return false;
}

2
arch/arm/kernel/signal.c
View File

@ -596,7 +596,7 @@ static int do_signal(struct pt_regs *regs, int syscall)
switch (retval) {
case -ERESTART_RESTARTBLOCK:
restart -= 2;
/* Fall through */
fallthrough;
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:

2
arch/arm/mach-ep93xx/crunch.c
View File

@ -49,7 +49,7 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
* FALLTHROUGH: Ensure we don't try to overwrite our newly
* initialised state information on the first fault.
*/
/* Fall through */
fallthrough;
case THREAD_NOTIFY_EXIT:
crunch_task_release(thread);

8
arch/arm/mach-mmp/pm-mmp2.c
View File

@ -123,19 +123,19 @@ void mmp2_pm_enter_lowpower_mode(int state)
case POWER_MODE_SYS_SLEEP:
apcr |= MPMU_PCR_PJ_SLPEN; /* set the SLPEN bit */
apcr |= MPMU_PCR_PJ_VCTCXOSD; /* set VCTCXOSD */
/* fall through */
fallthrough;
case POWER_MODE_CHIP_SLEEP:
apcr |= MPMU_PCR_PJ_SLPEN;
/* fall through */
fallthrough;
case POWER_MODE_APPS_SLEEP:
apcr |= MPMU_PCR_PJ_APBSD; /* set APBSD */
/* fall through */
fallthrough;
case POWER_MODE_APPS_IDLE:
apcr |= MPMU_PCR_PJ_AXISD; /* set AXISDD bit */
apcr |= MPMU_PCR_PJ_DDRCORSD; /* set DDRCORSD bit */
idle_cfg |= APMU_PJ_IDLE_CFG_PJ_PWRDWN; /* PJ power down */
apcr |= MPMU_PCR_PJ_SPSD;
/* fall through */
fallthrough;
case POWER_MODE_CORE_EXTIDLE:
idle_cfg |= APMU_PJ_IDLE_CFG_PJ_IDLE; /* set the IDLE bit */
idle_cfg &= ~APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK;

10
arch/arm/mach-mmp/pm-pxa910.c
View File

@ -145,23 +145,23 @@ void pxa910_pm_enter_lowpower_mode(int state)
case POWER_MODE_UDR:
/* only shutdown APB in UDR */
apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
/* fall through */
fallthrough;
case POWER_MODE_SYS_SLEEP:
apcr |= MPMU_APCR_SLPEN; /* set the SLPEN bit */
apcr |= MPMU_APCR_VCTCXOSD; /* set VCTCXOSD */
/* fall through */
fallthrough;
case POWER_MODE_APPS_SLEEP:
apcr |= MPMU_APCR_DDRCORSD; /* set DDRCORSD */
/* fall through */
fallthrough;
case POWER_MODE_APPS_IDLE:
apcr |= MPMU_APCR_AXISD; /* set AXISDD bit */
/* fall through */
fallthrough;
case POWER_MODE_CORE_EXTIDLE:
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
| APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
/* fall through */
fallthrough;
case POWER_MODE_CORE_INTIDLE:
break;
}

8
arch/arm/mach-omap2/id.c
View File

@ -396,7 +396,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "3.1";
break;
case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_1_2;
@ -416,7 +415,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "1.0";
break;
case 1:
/* FALLTHROUGH */
default:
omap_revision = AM35XX_REV_ES1_1;
cpu_rev = "1.1";
@ -435,7 +433,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "1.1";
break;
case 2:
/* FALLTHROUGH */
default:
omap_revision = OMAP3630_REV_ES1_2;
cpu_rev = "1.2";
@ -456,7 +453,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "2.0";
break;
case 3:
/* FALLTHROUGH */
default:
omap_revision = TI8168_REV_ES2_1;
cpu_rev = "2.1";
@ -473,7 +469,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "2.0";
break;
case 2:
/* FALLTHROUGH */
default:
omap_revision = AM335X_REV_ES2_1;
cpu_rev = "2.1";
@ -491,7 +486,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "1.1";
break;
case 2:
/* FALLTHROUGH */
default:
omap_revision = AM437X_REV_ES1_2;
cpu_rev = "1.2";
@ -502,7 +496,6 @@ void __init omap3xxx_check_revision(void)
case 0xb968:
switch (rev) {
case 0:
/* FALLTHROUGH */
case 1:
omap_revision = TI8148_REV_ES1_0;
cpu_rev = "1.0";
@ -512,7 +505,6 @@ void __init omap3xxx_check_revision(void)
cpu_rev = "2.0";
break;
case 3:
/* FALLTHROUGH */
default:
omap_revision = TI8148_REV_ES2_1;
cpu_rev = "2.1";

2
arch/arm/mach-omap2/omap-iommu.c
View File

@ -74,7 +74,7 @@ static struct powerdomain *_get_pwrdm(struct device *dev)
return pwrdm;
clk = of_clk_get(dev->of_node->parent, 0);
if (!clk) {
if (IS_ERR(clk)) {
dev_err(dev, "no fck found\n");
return NULL;
}

2
arch/arm/mach-omap2/omap_device.c
View File

@ -240,7 +240,7 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
if (pdev->dev.of_node)
omap_device_build_from_dt(pdev);
omap_auxdata_legacy_init(dev);
/* fall through */
fallthrough;
default:
od = to_omap_device(pdev);
if (od)

4
arch/arm/mach-omap2/pm34xx.c
View File

@ -298,11 +298,7 @@ static void omap3_pm_idle(void)
if (omap_irq_pending())
return;
trace_cpu_idle_rcuidle(1, smp_processor_id());
omap_sram_idle();
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#ifdef CONFIG_SUSPEND

2
arch/arm/mach-orion5x/dns323-setup.c
View File

@ -624,7 +624,7 @@ static void __init dns323_init(void)
dns323ab_leds[0].active_low = 1;
gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
/* Fall through */
fallthrough;
case DNS323_REV_B1:
i2c_register_board_info(0, dns323ab_i2c_devices,
ARRAY_SIZE(dns323ab_i2c_devices));

2
arch/arm/mach-rpc/riscpc.c
View File

@ -46,7 +46,7 @@ static int __init parse_tag_acorn(const struct tag *tag)
switch (tag->u.acorn.vram_pages) {
case 512:
vram_size += PAGE_SIZE * 256;
/* Fall through - ??? */
fallthrough; /* ??? */
case 256:
vram_size += PAGE_SIZE * 256;
default:

2
arch/arm/mach-tegra/reset.c
View File

@ -70,7 +70,7 @@ static void __init tegra_cpu_reset_handler_enable(void)
switch (err) {
case -ENOSYS:
tegra_cpu_reset_handler_set(reset_address);
/* fall through */
fallthrough;
case 0:
is_enabled = true;
break;

4
arch/arm/mm/alignment.c
View File

@ -694,7 +694,7 @@ thumb2arm(u16 tinstr)
return subset[(L<<1) | ((tinstr & (1<<8)) >> 8)] |
(tinstr & 255); /* register_list */
}
/* Else, fall through - for illegal instruction case */
fallthrough; /* for illegal instruction case */
default:
return BAD_INSTR;
@ -750,7 +750,7 @@ do_alignment_t32_to_handler(u32 *pinstr, struct pt_regs *regs,
case 0xe8e0:
case 0xe9e0:
poffset->un = (tinst2 & 0xff) << 2;
/* Fall through */
fallthrough;
case 0xe940:
case 0xe9c0:

2
arch/arm/mm/proc-v7-bugs.c
View File

@ -71,7 +71,7 @@ static void cpu_v7_spectre_init(void)
/* Other ARM CPUs require no workaround */
if (read_cpuid_implementor() == ARM_CPU_IMP_ARM)
break;
/* fallthrough */
fallthrough;
/* Cortex A57/A72 require firmware workaround */
case ARM_CPU_PART_CORTEX_A57:
case ARM_CPU_PART_CORTEX_A72: {

6
arch/arm/plat-omap/dma.c
View File

@ -309,14 +309,14 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
* not supported by current hardware on OMAP1
* w |= (0x03 << 7);
*/
/* fall through */
fallthrough;
case OMAP_DMA_DATA_BURST_16:
if (dma_omap2plus()) {
burst = 0x3;
break;
}
/* OMAP1 don't support burst 16 */
/* fall through */
fallthrough;
default:
BUG();
}
@ -393,7 +393,7 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
break;
}
/* OMAP1 don't support burst 16 */
/* fall through */
fallthrough;
default:
printk(KERN_ERR "Invalid DMA burst mode\n");
BUG();

2
arch/arm/probes/decode.c
View File

@ -307,7 +307,7 @@ static bool __kprobes decode_regs(probes_opcode_t *pinsn, u32 regs, bool modify)
case REG_TYPE_NOPCWB:
if (!is_writeback(insn))
break; /* No writeback, so any register is OK */
/* fall through... */
fallthrough;
case REG_TYPE_NOPC:
case REG_TYPE_NOPCX:
/* Reject PC (R15) */

2
arch/arm/probes/kprobes/core.c
View File

@ -280,7 +280,7 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
/* A nested probe was hit in FIQ, it is a BUG */
pr_warn("Unrecoverable kprobe detected.\n");
dump_kprobe(p);
/* fall through */
fallthrough;
default:
/* impossible cases */
BUG();

14
arch/arm64/Makefile
View File

@ -82,8 +82,8 @@ endif
# compiler to generate them and consequently to break the single image contract
# we pass it only to the assembler. This option is utilized only in case of non
# integrated assemblers.
ifneq ($(CONFIG_AS_HAS_ARMV8_4), y)
branch-prot-flags-$(CONFIG_AS_HAS_PAC) += -Wa,-march=armv8.3-a
ifeq ($(CONFIG_AS_HAS_PAC), y)
asm-arch := armv8.3-a
endif
endif
@ -91,7 +91,12 @@ KBUILD_CFLAGS += $(branch-prot-flags-y)
ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
# make sure to pass the newest target architecture to -march.
KBUILD_CFLAGS += -Wa,-march=armv8.4-a
asm-arch := armv8.4-a
endif
ifdef asm-arch
KBUILD_CFLAGS += -Wa,-march=$(asm-arch) \
-DARM64_ASM_ARCH='"$(asm-arch)"'
endif
ifeq ($(CONFIG_SHADOW_CALL_STACK), y)
@ -165,7 +170,8 @@ zinstall install:
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@
$(if $(CONFIG_COMPAT_VDSO), \
$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:

2
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
View File

@ -745,7 +745,7 @@
};
qspi: spi@66470200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
reg = <0x66470200 0x184>,
<0x66470000 0x124>,
<0x67017408 0x004>,

1
arch/arm64/boot/dts/freescale/Makefile
View File

@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb

2
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View File

@ -702,7 +702,7 @@
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
<&clk IMX8MP_CLK_SDMA1_ROOT>;
<&clk IMX8MP_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";

2
arch/arm64/boot/dts/freescale/imx8mq.dtsi
View File

@ -423,7 +423,7 @@
tmu: tmu@30260000 {
compatible = "fsl,imx8mq-tmu";
reg = <0x30260000 0x10000>;
interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
little-endian;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;

2
arch/arm64/boot/dts/mediatek/mt7622.dtsi
View File

@ -686,6 +686,8 @@
clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
<&topckgen CLK_TOP_MSDC50_0_SEL>;
clock-names = "source", "hclk";
resets = <&pericfg MT7622_PERI_MSDC0_SW_RST>;
reset-names = "hrst";
status = "disabled";
};

20
arch/arm64/boot/dts/nvidia/tegra186.dtsi
View File

@ -337,8 +337,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03400000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC1>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC1>;
reset-names = "sdhci";
interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
@ -366,8 +367,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03420000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC2>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC2>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC2>;
reset-names = "sdhci";
interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>,
@ -390,8 +392,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03440000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC3>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC3>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC3>;
reset-names = "sdhci";
interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>,
@ -416,8 +419,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03460000 0x0 0x10000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
<&bpmp TEGRA186_CLK_PLLC4_VCO>;
assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;

15
arch/arm64/boot/dts/nvidia/tegra194.dtsi
View File

@ -460,8 +460,9 @@
compatible = "nvidia,tegra194-sdhci";
reg = <0x03400000 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA194_CLK_SDMMC1>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC1>;
reset-names = "sdhci";
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
@ -485,8 +486,9 @@
compatible = "nvidia,tegra194-sdhci";
reg = <0x03440000 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA194_CLK_SDMMC3>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC3>;
reset-names = "sdhci";
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
@ -511,8 +513,9 @@
compatible = "nvidia,tegra194-sdhci";
reg = <0x03460000 0x10000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA194_CLK_SDMMC4>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
<&bpmp TEGRA194_CLK_PLLC4>;
assigned-clock-parents =

20
arch/arm64/boot/dts/nvidia/tegra210.dtsi
View File

@ -1194,8 +1194,9 @@
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 14>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
@ -1222,8 +1223,9 @@
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0200 0x0 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC2>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 9>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-1v8-drv";
@ -1239,8 +1241,9 @@
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0400 0x0 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC3>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 69>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
@ -1262,8 +1265,9 @@
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0600 0x0 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 15>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3-drv", "sdmmc-1v8-drv";

36
arch/arm64/boot/dts/ti/k3-am65-main.dtsi
View File

@ -417,10 +417,10 @@
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <56>;
ti,sci-rm-range-girq = <0x1>;
ti,sci-dev-id = <100>;
ti,interrupt-ranges = <0 392 32>;
};
main_navss {
@ -438,10 +438,11 @@
ti,intr-trigger-type = <4>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <56>;
ti,sci-rm-range-girq = <0x0>, <0x2>;
ti,sci-dev-id = <182>;
ti,interrupt-ranges = <0 64 64>,
<64 448 64>;
};
inta_main_udmass: interrupt-controller@33d00000 {
@ -452,8 +453,7 @@
msi-controller;
ti,sci = <&dmsc>;
ti,sci-dev-id = <179>;
ti,sci-rm-range-vint = <0x0>;
ti,sci-rm-range-global-event = <0x1>;
ti,interrupt-ranges = <0 0 256>;
};
secure_proxy_main: mailbox@32c00000 {
@ -589,7 +589,7 @@
<0x0 0x33000000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <818>;
ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,dma-ring-reset-quirk;
ti,sci = <&dmsc>;
ti,sci-dev-id = <187>;
@ -609,11 +609,11 @@
ti,sci-dev-id = <188>;
ti,ringacc = <&ringacc>;
ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
<0x2>; /* TX_CHAN */
ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
<0x5>; /* RX_CHAN */
ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
<0xd>; /* TX_CHAN */
ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
<0xa>; /* RX_CHAN */
ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
};
cpts@310d0000 {
@ -622,7 +622,7 @@
reg-names = "cpts";
clocks = <&main_cpts_mux>;
clock-names = "cpts";
interrupts-extended = <&intr_main_navss 163 0>;
interrupts-extended = <&intr_main_navss 391>;
interrupt-names = "cpts";
ti,cpts-periodic-outputs = <6>;
ti,cpts-ext-ts-inputs = <8>;
@ -645,8 +645,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&intr_main_gpio>;
interrupts = <57 256>, <57 257>, <57 258>, <57 259>, <57 260>,
<57 261>;
interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <96>;
@ -661,8 +660,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&intr_main_gpio>;
interrupts = <58 256>, <58 257>, <58 258>, <58 259>, <58 260>,
<58 261>;
interrupts = <200>, <201>, <202>, <203>, <204>, <205>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <90>;

12
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
View File

@ -134,7 +134,7 @@
<0x0 0x2a500000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <286>;
ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,dma-ring-reset-quirk;
ti,sci = <&dmsc>;
ti,sci-dev-id = <195>;
@ -154,11 +154,11 @@
ti,sci-dev-id = <194>;
ti,ringacc = <&mcu_ringacc>;
ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
<0x2>; /* TX_CHAN */
ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */
<0x4>; /* RX_CHAN */
ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
<0xd>; /* TX_CHAN */
ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
<0xa>; /* RX_CHAN */
ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
};
};

8
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
View File

@ -74,10 +74,10 @@
ti,intr-trigger-type = <1>;
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <2>;
#interrupt-cells = <1>;
ti,sci = <&dmsc>;
ti,sci-dst-id = <56>;
ti,sci-rm-range-girq = <0x4>;
ti,sci-dev-id = <156>;
ti,interrupt-ranges = <0 712 16>;
};
wkup_gpio0: wkup_gpio0@42110000 {
@ -86,7 +86,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&intr_wkup_gpio>;
interrupts = <59 128>, <59 129>, <59 130>, <59 131>;
interrupts = <60>, <61>, <62>, <63>;
interrupt-controller;
#interrupt-cells = <2>;
ti,ngpio = <56>;

4
arch/arm64/boot/dts/ti/k3-am654-base-board.dts
View File

@ -384,7 +384,7 @@
};
&mailbox0_cluster0 {
interrupts = <164 0>;
interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
ti,mbox-tx = <1 0 0>;
@ -393,7 +393,7 @@
};
&mailbox0_cluster1 {
interrupts = <165 0>;
interrupts = <432>;
mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
ti,mbox-tx = <1 0 0>;

10
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
View File

@ -287,7 +287,7 @@
};
&mailbox0_cluster0 {
interrupts = <214 0>;
interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
ti,mbox-rx = <0 0 0>;
@ -301,7 +301,7 @@
};
&mailbox0_cluster1 {
interrupts = <215 0>;
interrupts = <432>;
mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
ti,mbox-rx = <0 0 0>;
@ -315,7 +315,7 @@
};
&mailbox0_cluster2 {
interrupts = <216 0>;
interrupts = <428>;
mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
ti,mbox-rx = <0 0 0>;
@ -329,7 +329,7 @@
};
&mailbox0_cluster3 {
interrupts = <217 0>;
interrupts = <424>;
mbox_c66_0: mbox-c66-0 {
ti,mbox-rx = <0 0 0>;
@ -343,7 +343,7 @@
};
&mailbox0_cluster4 {
interrupts = <218 0>;
interrupts = <420>;
mbox_c71_0: mbox-c71-0 {
ti,mbox-rx = <0 0 0>;

Some files were not shown because too many files have changed in this diff Show More