leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

OMAP patches intended for the 3.7 merge window:

Browse Source 
- Runtime PM conversions for the GPMC and RNG IP blocks
 - Preparation patches for the OMAP common clock framework conversion
 - clkdev alias additions required by other drivers
 - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4
 - OMAP hwmod code and data improvements
 - Preparation patches for the IOMMU runtime PM conversion
 - Preparation patches for OMAP4 full-chip retention support
 
 Based on a merge of v3.6-rc6, the omap-cleanup-b-for-3.7 tag
 (7852ec0536),the cleanup-fixes-for-v3.7
 tag (de6ca33a96), and the
 omap-devel-am33xx-for-v3.7 tag
 (11964f53eb), due to dependencies.
 
 These patches have been tested for meaningful warnings from
 checkpatch, sparse, smatch, and cppcheck.  Basic build, boot[1], and
 PM test logs are available here:
 
     http://www.pwsan.com/omap/testlogs/hwmod_prcm_clock_a_3.7/20120923173830/
 
 ...
 
 1. Note that the N800 boot fails due to a known issue present in the
    base commit:
 
     http://www.spinics.net/lists/arm-kernel/msg196034.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQX6q1AAoJEMePsQ0LvSpLb8MP/1IIjwE1utMkCLQEVuBLqATB
 obMtowyVaRSvwNBndEeL107Za8kDcXBdbAM5/4Kig5JaGqnvpmrhV4bufwb8QaC6
 PDbZHXWfkfEk5loYz5cIzcMsZihEx83uw1J5rnlkDGNH0GAjs5HUSE6eunowSQR4
 +TUU483aq7W6/f6Wly3SmxgR7tG0TGSkbCGudAhBFo1tNgdeK6vvPd1x7P34uRY0
 h5j0qKvAOhBCD5VtDyCgx7TMha500ZvgrelcJmZ/0zuGT/4sM8d3sfvlyQEf/wz1
 y62AKOMEICScPlovJIlS2U5fmrNoel5o33f7jFjvT1tslHq6siQB3aQ1y21gFj5z
 sOTzYTcFWixv+p76g5ZtwC86xp4KbioGca03vytOaSYHq42lLaMcqcOY1BasGtDA
 M1iA+pz3qGsU0KUbek1zHLuOBXbuYUkznKYzB39u/l+2CLx3PbP5cUbsUBhb2DhN
 wimri7DF1G0gEm1FYgm+WNWSEz4DVWDgDC0a3RbPttRG0GFvVYCHPaB+QD/WI563
 U7lY2znhMh5w0+VzDnw7FbVNBd2soj8s0fV9FoGzJzAfWZstpfUbrHwQK/rRk6VL
 pBmDQwbksUCUsLNH1StySBEV7qqTsvep7uFEawhFjxTAydUZ5FZVGxpZd8wMrRNW
 UQ9tJLelQr1Fd+BPy7IN
 =kEj0
 -----END PGP SIGNATURE-----

Merge tag 'omap-devel-b-c-2-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into devel-late

OMAP patches intended for the 3.7 merge window:

- Runtime PM conversions for the GPMC and RNG IP blocks
- Preparation patches for the OMAP common clock framework conversion
- clkdev alias additions required by other drivers
- Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4
- OMAP hwmod code and data improvements
- Preparation patches for the IOMMU runtime PM conversion
- Preparation patches for OMAP4 full-chip retention support

Based on a merge of v3.6-rc6, the omap-cleanup-b-for-3.7 tag
(7852ec0536),the cleanup-fixes-for-v3.7
tag (de6ca33a96), and the
omap-devel-am33xx-for-v3.7 tag
(11964f53eb), due to dependencies.

These patches have been tested for meaningful warnings from
checkpatch, sparse, smatch, and cppcheck.  Basic build, boot[1], and
PM test logs are available here:

    http://www.pwsan.com/omap/testlogs/hwmod_prcm_clock_a_3.7/20120923173830/

...

1. Note that the N800 boot fails due to a known issue present in the
   base commit:

    http://www.spinics.net/lists/arm-kernel/msg196034.html
This commit is contained in:
Tony Lindgren 2012-09-23 19:31:35 -07:00
commit 9cd68fa707
418 changed files with 13777 additions and 11614 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Documentation/ABI/testing/sysfs-tty
View File

@ -17,3 +17,12 @@ Description:
device, like 'tty1'.
The file supports poll() to detect virtual
console switches.
What: /sys/class/tty/ttyS0/uartclk
Date: Sep 2012
Contact: Tomas Hlavacek <tmshlvck@gmail.com>
Description:
Shows the current uartclk value associated with the
UART port in serial_core, that is bound to TTY like ttyS0.
uartclk = 16 * baud_base

14
Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt Normal file
View File

@ -0,0 +1,14 @@
* NXP LPC32xx SoC High Speed UART
Required properties:
- compatible: Should be "nxp,lpc3220-hsuart"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt
Example:
uart1: serial@40014000 {
compatible = "nxp,lpc3220-hsuart";
reg = <0x40014000 0x1000>;
interrupts = <26 0>;
};

2
Documentation/devicetree/bindings/tty/serial/of-serial.txt
View File

@ -25,6 +25,8 @@ Optional properties:
accesses to the UART (e.g. TI davinci).
- used-by-rtas : set to indicate that the port is in use by the OpenFirmware
RTAS and should not be registered.
- no-loopback-test: set to indicate that the port does not implements loopback
test mode
Example:

2
Documentation/serial/00-INDEX
View File

@ -2,8 +2,6 @@
- this file.
README.cycladesZ
- info on Cyclades-Z firmware loading.
computone.txt
- info on Computone Intelliport II/Plus Multiport Serial Driver.
digiepca.txt
- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
hayes-esp.txt

520
Documentation/serial/computone.txt
View File

@ -1,520 +0,0 @@
NOTE: This is an unmaintained driver. It is not guaranteed to work due to
changes made in the tty layer in 2.6. If you wish to take over maintenance of
this driver, contact Michael Warfield <mhw@wittsend.com>.
Changelog:
----------
11-01-2001: Original Document
10-29-2004: Minor misspelling & format fix, update status of driver.
James Nelson <james4765@gmail.com>
Computone Intelliport II/Plus Multiport Serial Driver
-----------------------------------------------------
Release Notes For Linux Kernel 2.2 and higher.
These notes are for the drivers which have already been integrated into the
kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4.
Version: 1.2.14
Date: 11/01/2001
Historical Author: Andrew Manison <amanison@america.net>
Primary Author: Doug McNash
This file assumes that you are using the Computone drivers which are
integrated into the kernel sources. For updating the drivers or installing
drivers into kernels which do not already have Computone drivers, please
refer to the instructions in the README.computone file in the driver patch.
1. INTRODUCTION
This driver supports the entire family of Intelliport II/Plus controllers
with the exception of the MicroChannel controllers. It does not support
products previous to the Intelliport II.
This driver was developed on the v2.0.x Linux tree and has been tested up
to v2.4.14; it will probably not work with earlier v1.X kernels,.
2. QUICK INSTALLATION
Hardware - If you have an ISA card, find a free interrupt and io port.
List those in use with `cat /proc/interrupts` and
`cat /proc/ioports`. Set the card dip switches to a free
address. You may need to configure your BIOS to reserve an
irq for an ISA card. PCI and EISA parameters are set
automagically. Insert card into computer with the power off
before or after drivers installation.
Note the hardware address from the Computone ISA cards installed into
the system. These are required for editing ip2.c or editing
/etc/modprobe.d/*.conf, or for specification on the modprobe
command line.
Note that the /etc/modules.conf should be used for older (pre-2.6)
kernels.
Software -
Module installation:
a) Determine free irq/address to use if any (configure BIOS if need be)
b) Run "make config" or "make menuconfig" or "make xconfig"
Select (m) module for CONFIG_COMPUTONE under character
devices. CONFIG_PCI and CONFIG_MODULES also may need to be set.
c) Set address on ISA cards then:
edit /usr/src/linux/drivers/char/ip2.c if needed
or
edit config file in /etc/modprobe.d/ if needed (module).
or both to match this setting.
d) Run "make modules"
e) Run "make modules_install"
f) Run "/sbin/depmod -a"
g) install driver using `modprobe ip2 <options>` (options listed below)
h) run ip2mkdev (either the script below or the binary version)
Kernel installation:
a) Determine free irq/address to use if any (configure BIOS if need be)
b) Run "make config" or "make menuconfig" or "make xconfig"
Select (y) kernel for CONFIG_COMPUTONE under character
devices. CONFIG_PCI may need to be set if you have PCI bus.
c) Set address on ISA cards then:
edit /usr/src/linux/drivers/char/ip2.c
(Optional - may be specified on kernel command line now)
d) Run "make zImage" or whatever target you prefer.
e) mv /usr/src/linux/arch/x86/boot/zImage to /boot.
f) Add new config for this kernel into /etc/lilo.conf, run "lilo"
or copy to a floppy disk and boot from that floppy disk.
g) Reboot using this kernel
h) run ip2mkdev (either the script below or the binary version)
Kernel command line options:
When compiling the driver into the kernel, io and irq may be
compiled into the driver by editing ip2.c and setting the values for
io and irq in the appropriate array. An alternative is to specify
a command line parameter to the kernel at boot up.
ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
Note that this order is very different from the specifications for the
modload parameters which have separate IRQ and IO specifiers.
The io port also selects PCI (1) and EISA (2) boards.
io=0 No board
io=1 PCI board
io=2 EISA board
else ISA board io address
You only need to specify the boards which are present.
Examples:
2 PCI boards:
ip2=1,0,1,0
1 ISA board at 0x310 irq 5:
ip2=0x310,5
This can be added to and "append" option in lilo.conf similar to this:
append="ip2=1,0,1,0"
3. INSTALLATION
Previously, the driver sources were packaged with a set of patch files
to update the character drivers' makefile and configuration file, and other
kernel source files. A build script (ip2build) was included which applies
the patches if needed, and build any utilities needed.
What you receive may be a single patch file in conventional kernel
patch format build script. That form can also be applied by
running patch -p1 < ThePatchFile. Otherwise run ip2build.
The driver can be installed as a module (recommended) or built into the
kernel. This is selected as for other drivers through the `make config`
command from the root of the Linux source tree. If the driver is built
into the kernel you will need to edit the file ip2.c to match the boards
you are installing. See that file for instructions. If the driver is
installed as a module the configuration can also be specified on the
modprobe command line as follows:
modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4
where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11,
12,15) and addr1-4 are the base addresses for up to four controllers. If
the irqs are not specified the driver uses the default in ip2.c (which
selects polled mode). If no base addresses are specified the defaults in
ip2.c are used. If you are autoloading the driver module with kerneld or
kmod the base addresses and interrupt number must also be set in ip2.c
and recompile or just insert and options line in /etc/modprobe.d/*.conf or both.
The options line is equivalent to the command line and takes precedence over
what is in ip2.c.
config sample to put /etc/modprobe.d/*.conf:
options ip2 io=1,0x328 irq=1,10
alias char-major-71 ip2
alias char-major-72 ip2
alias char-major-73 ip2
The equivalent in ip2.c:
static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 };
static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 };
The equivalent for the kernel command line (in lilo.conf):
append="ip2=1,1,0x328,10"
Note: Both io and irq should be updated to reflect YOUR system. An "io"
address of 1 or 2 indicates a PCI or EISA card in the board table.
The PCI or EISA irq will be assigned automatically.
Specifying an invalid or in-use irq will default the driver into
running in polled mode for that card. If all irq entries are 0 then
all cards will operate in polled mode.
If you select the driver as part of the kernel run :
make zlilo (or whatever you do to create a bootable kernel)
If you selected a module run :
make modules && make modules_install
The utility ip2mkdev (see 5 and 7 below) creates all the device nodes
required by the driver. For a device to be created it must be configured
in the driver and the board must be installed. Only devices corresponding
to real IntelliPort II ports are created. With multiple boards and expansion
boxes this will leave gaps in the sequence of device names. ip2mkdev uses
Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and
cuf0 - cuf255 for callout devices.
4. USING THE DRIVERS
As noted above, the driver implements the ports in accordance with Linux
conventions, and the devices should be interchangeable with the standard
serial devices. (This is a key point for problem reporting: please make
sure that what you are trying do works on the ttySx/cuax ports first; then
tell us what went wrong with the ip2 ports!)
Higher speeds can be obtained using the setserial utility which remaps
38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed.
Intelliport II installations using the PowerPort expansion module can
use the custom speed setting to select the highest speeds: 153,600 bps,
230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for
custom baud rate configuration is fixed at 921,600 for cards/expansion
modules with ST654's and 115200 for those with Cirrus CD1400's. This
corresponds to the maximum bit rates those chips are capable.
For example if the baud base is 921600 and the baud divisor is 18 then
the custom rate is 921600/18 = 51200 bps. See the setserial man page for
complete details. Of course if stty accepts the higher rates now you can
use that as well as the standard ioctls().
5. ip2mkdev and assorted utilities...
Several utilities, including the source for a binary ip2mkdev utility are
available under .../drivers/char/ip2. These can be build by changing to
that directory and typing "make" after the kernel has be built. If you do
not wish to compile the binary utilities, the shell script below can be
cut out and run as "ip2mkdev" to create the necessary device files. To
use the ip2mkdev script, you must have procfs enabled and the proc file
system mounted on /proc.
6. NOTES
This is a release version of the driver, but it is impossible to test it
in all configurations of Linux. If there is any anomalous behaviour that
does not match the standard serial port's behaviour please let us know.
7. ip2mkdev shell script
Previously, this script was simply attached here. It is now attached as a
shar archive to make it easier to extract the script from the documentation.
To create the ip2mkdev shell script change to a convenient directory (/tmp
works just fine) and run the following command:
unshar Documentation/serial/computone.txt
(This file)
You should now have a file ip2mkdev in your current working directory with
permissions set to execute. Running that script with then create the
necessary devices for the Computone boards, interfaces, and ports which
are present on you system at the time it is run.
#!/bin/sh
# This is a shell archive (produced by GNU sharutils 4.2.1).
# To extract the files from this archive, save it to some FILE, remove
# everything before the `!/bin/sh' line above, then type `sh FILE'.
#
# Made on 2001-10-29 10:32 EST by <mhw@alcove.wittsend.com>.
# Source directory was `/home2/src/tmp'.
#
# Existing files will *not* be overwritten unless `-c' is specified.
#
# This shar contains:
# length mode name
# ------ ---------- ------------------------------------------
# 4251 -rwxr-xr-x ip2mkdev
#
save_IFS="${IFS}"
IFS="${IFS}:"
gettext_dir=FAILED
locale_dir=FAILED
first_param="$1"
for dir in $PATH
do
if test "$gettext_dir" = FAILED && test -f $dir/gettext \
&& ($dir/gettext --version >/dev/null 2>&1)
then
set `$dir/gettext --version 2>&1`
if test "$3" = GNU
then
gettext_dir=$dir
fi
fi
if test "$locale_dir" = FAILED && test -f $dir/shar \
&& ($dir/shar --print-text-domain-dir >/dev/null 2>&1)
then
locale_dir=`$dir/shar --print-text-domain-dir`
fi
done
IFS="$save_IFS"
if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED
then
echo=echo
else
TEXTDOMAINDIR=$locale_dir
export TEXTDOMAINDIR
TEXTDOMAIN=sharutils
export TEXTDOMAIN
echo="$gettext_dir/gettext -s"
fi
if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then
shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"'
elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then
shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"'
elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then
shar_touch='touch -am $3$4$5$6$2 "$8"'
else
shar_touch=:
echo
$echo 'WARNING: not restoring timestamps. Consider getting and'
$echo "installing GNU \`touch', distributed in GNU File Utilities..."
echo
fi
rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch
#
if mkdir _sh17581; then
$echo 'x -' 'creating lock directory'
else
$echo 'failed to create lock directory'
exit 1
fi
# ============= ip2mkdev ==============
if test -f 'ip2mkdev' && test "$first_param" != -c; then
$echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)'
else
$echo 'x -' extracting 'ip2mkdev' '(text)'
sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' &&
#!/bin/sh -
#
# ip2mkdev
#
# Make or remove devices as needed for Computone Intelliport drivers
#
# First rule! If the dev file exists and you need it, don't mess
# with it. That prevents us from screwing up open ttys, ownership
# and permissions on a running system!
#
# This script will NOT remove devices that no longer exist if their
# board or interface box has been removed. If you want to get rid
# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*"
# before running this script. Running this script will then recreate
# all the valid devices.
#
# Michael H. Warfield
# /\/\|=mhw=|\/\/
# mhw@wittsend.com
#
# Updated 10/29/2000 for version 1.2.13 naming convention
# under devfs. /\/\|=mhw=|\/\/
#
# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/
#
X
if test -d /dev/ip2 ; then
# This is devfs mode... We don't do anything except create symlinks
# from the real devices to the old names!
X cd /dev
X echo "Creating symbolic links to devfs devices"
X for i in `ls ip2` ; do
X if test ! -L ip2$i ; then
X # Remove it incase it wasn't a symlink (old device)
X rm -f ip2$i
X ln -s ip2/$i ip2$i
X fi
X done
X for i in `( cd tts ; ls F* )` ; do
X if test ! -L tty$i ; then
X # Remove it incase it wasn't a symlink (old device)
X rm -f tty$i
X ln -s tts/$i tty$i
X fi
X done
X for i in `( cd cua ; ls F* )` ; do
X DEVNUMBER=`expr $i : 'F\(.*\)'`
X if test ! -L cuf$DEVNUMBER ; then
X # Remove it incase it wasn't a symlink (old device)
X rm -f cuf$DEVNUMBER
X ln -s cua/$i cuf$DEVNUMBER
X fi
X done
X exit 0
fi
X
if test ! -f /proc/tty/drivers
then
X echo "\
Unable to check driver status.
Make sure proc file system is mounted."
X
X exit 255
fi
X
if test ! -f /proc/tty/driver/ip2
then
X echo "\
Unable to locate ip2 proc file.
Attempting to load driver"
X
X if /sbin/insmod ip2
X then
X if test ! -f /proc/tty/driver/ip2
X then
X echo "\
Unable to locate ip2 proc file after loading driver.
Driver initialization failure or driver version error.
"
X exit 255
X fi
X else
X echo "Unable to load ip2 driver."
X exit 255
X fi
fi
X
# Ok... So we got the driver loaded and we can locate the procfs files.
# Next we need our major numbers.
X
TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers`
CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers`
BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2`
X
echo "\
TTYMAJOR = $TTYMAJOR
CUAMAJOR = $CUAMAJOR
BRDMAJOR = $BRDMAJOR
"
X
# Ok... Now we should know our major numbers, if appropriate...
# Now we need our boards and start the device loops.
X
grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest
do
X # The test for blank "type" will catch the stats lead-in lines
X # if they exist in the file
X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = ""
X then
X continue
X fi
X
X BOARDNO=`expr "$number" : '\([0-9]\):'`
X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '`
X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '`
X
X if test "$BOARDNO" = "" -o "$PORTS" = ""
X then
# This may be a bug. We should at least get this much information
X echo "Unable to process board line"
X continue
X fi
X
X if test "$MINORS" = ""
X then
# Silently skip this one. This board seems to have no boxes
X continue
X fi
X
X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS"
X
X if test "$BRDMAJOR" != ""
X then
X BRDMINOR=`expr $BOARDNO \* 4`
X STSMINOR=`expr $BRDMINOR + 1`
X if test ! -c /dev/ip2ipl$BOARDNO ; then
X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR
X fi
X if test ! -c /dev/ip2stat$BOARDNO ; then
X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR
X fi
X fi
X
X if test "$TTYMAJOR" != ""
X then
X PORTNO=$BOARDBASE
X
X for PORTNO in $MINORS
X do
X if test ! -c /dev/ttyF$PORTNO ; then
X # We got the hardware but no device - make it
X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO
X fi
X done
X fi
X
X if test "$CUAMAJOR" != ""
X then
X PORTNO=$BOARDBASE
X
X for PORTNO in $MINORS
X do
X if test ! -c /dev/cuf$PORTNO ; then
X # We got the hardware but no device - make it
X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO
X fi
X done
X fi
done
X
Xexit 0
SHAR_EOF
(set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") &&
chmod 0755 'ip2mkdev' ||
$echo 'restore of' 'ip2mkdev' 'failed'
if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \
&& ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then
md5sum -c << SHAR_EOF >/dev/null 2>&1 \
|| $echo 'ip2mkdev:' 'MD5 check failed'
cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev
SHAR_EOF
else
shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`"
test 4251 -eq "$shar_count" ||
$echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!"
fi
fi
rm -fr _sh17581
exit 0

1
arch/alpha/kernel/srmcons.c
View File

@ -223,6 +223,7 @@ srmcons_init(void)
driver->subtype = SYSTEM_TYPE_SYSCONS;
driver->init_termios = tty_std_termios;
tty_set_operations(driver, &srmcons_ops);
tty_port_link_device(&srmcons_singleton.port, driver, 0);
err = tty_register_driver(driver);
if (err) {
put_tty_driver(driver);

1
arch/arm/mach-omap1/ams-delta-fiq-handler.S
View File

@ -18,6 +18,7 @@
#include <plat/board-ams-delta.h>
#include <mach/irqs.h>
#include <mach/ams-delta-fiq.h>
#include "iomap.h"

2
arch/arm/mach-omap1/board-ams-delta.c
View File

@ -26,6 +26,7 @@
#include <linux/export.h>
#include <linux/omapfb.h>
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
#include <media/soc_camera.h>
@ -37,7 +38,6 @@
#include <plat/board-ams-delta.h>
#include <plat/keypad.h>
#include <plat/mux.h>
#include <plat/board.h>
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>

1
arch/arm/mach-omap1/board-fsample.c
View File

@ -32,7 +32,6 @@
#include <plat/flash.h>
#include <plat/fpga.h>
#include <plat/keypad.h>
#include <plat/board.h>
#include <mach/hardware.h>

6
arch/arm/mach-omap1/board-generic.c
View File

@ -23,7 +23,6 @@
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/board.h>
#include <mach/usb.h>
@ -52,9 +51,6 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
};
#endif
static struct omap_board_config_kernel generic_config[] __initdata = {
};
static void __init omap_generic_init(void)
{
#ifdef CONFIG_ARCH_OMAP15XX
@ -76,8 +72,6 @@ static void __init omap_generic_init(void)
}
#endif
omap_board_config = generic_config;
omap_board_config_size = ARRAY_SIZE(generic_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
}

1
arch/arm/mach-omap1/board-h2.c
View File

@ -31,6 +31,7 @@
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

1
arch/arm/mach-omap1/board-h3.c
View File

@ -31,6 +31,7 @@
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
#include <linux/omapfb.h>
#include <linux/platform_data/gpio-omap.h>
#include <asm/setup.h>
#include <asm/page.h>

6
arch/arm/mach-omap1/board-htcherald.c
View File

@ -41,8 +41,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <plat/omap7xx.h>
#include <plat/board.h>
#include <mach/omap7xx.h>
#include <plat/keypad.h>
#include <plat/mmc.h>
@ -476,8 +475,7 @@ static void __init htcherald_lcd_init(void)
break;
}
if (!tries)
printk(KERN_WARNING "Timeout waiting for end of frame "
"-- LCD may not be available\n");
pr_err("Timeout waiting for end of frame -- LCD may not be available\n");
/* turn off DMA */
reg = omap_readw(OMAP_DMA_LCD_CCR);

1
arch/arm/mach-omap1/board-nokia770.c
View File

@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include <plat/mux.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/lcd_mipid.h>
#include <plat/mmc.h>

2
arch/arm/mach-omap1/board-osk.c
View File

@ -39,6 +39,8 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c/tps65010.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

2
arch/arm/mach-omap1/board-palmte.c
View File

@ -28,6 +28,7 @@
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
#include <linux/omapfb.h>
#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -37,7 +38,6 @@
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>

2
arch/arm/mach-omap1/board-palmtt.c
View File

@ -27,6 +27,7 @@
#include <linux/omapfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -37,7 +38,6 @@
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>

2
arch/arm/mach-omap1/board-palmz71.c
View File

@ -30,6 +30,7 @@
#include <linux/omapfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -39,7 +40,6 @@
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/irda.h>
#include <plat/keypad.h>

1
arch/arm/mach-omap1/board-perseus2.c
View File

@ -32,7 +32,6 @@
#include <plat/fpga.h>
#include <plat/flash.h>
#include <plat/keypad.h>
#include <plat/board.h>
#include <mach/hardware.h>

1
arch/arm/mach-omap1/board-sx1.c
View File

@ -38,7 +38,6 @@
#include <plat/dma.h>
#include <plat/irda.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/board-sx1.h>

6
arch/arm/mach-omap1/board-voiceblue.c
View File

@ -35,7 +35,6 @@
#include <plat/flash.h>
#include <plat/mux.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <mach/hardware.h>
#include <mach/usb.h>
@ -155,9 +154,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
.pins[2] = 6,
};
static struct omap_board_config_kernel voiceblue_config[] = {
};
#define MACHINE_PANICED 1
#define MACHINE_REBOOTING 2
#define MACHINE_REBOOT 4
@ -275,8 +271,6 @@ static void __init voiceblue_init(void)
voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
omap_board_config = voiceblue_config;
omap_board_config_size = ARRAY_SIZE(voiceblue_config);
omap_serial_init();
omap1_usb_init(&voiceblue_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);

4
arch/arm/mach-omap1/clock.c
View File

@ -587,8 +587,8 @@ void omap1_clk_disable_unused(struct clk *clk)
/* Clocks in the DSP domain need api_ck. Just assume bootloader
* has not enabled any DSP clocks */
if (clk->enable_reg == DSP_IDLECT2) {
printk(KERN_INFO "Skipping reset check for DSP domain "
"clock \"%s\"\n", clk->name);
pr_info("Skipping reset check for DSP domain clock \"%s\"\n",
clk->name);
return;
}

21
arch/arm/mach-omap1/clock_data.c
View File

@ -25,7 +25,6 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
#include <plat/board.h>
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <mach/hardware.h>
@ -776,11 +775,10 @@ static struct clk_functions omap1_clk_functions = {
static void __init omap1_show_rates(void)
{
pr_notice("Clocking rate (xtal/DPLL1/MPU): "
"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
}
u32 cpu_mask;
@ -788,7 +786,6 @@ u32 cpu_mask;
int __init omap1_clk_init(void)
{
struct omap_clk *c;
const struct omap_clock_config *info;
int crystal_type = 0; /* Default 12 MHz */
u32 reg;
@ -837,19 +834,13 @@ int __init omap1_clk_init(void)
ck_dpll1_p = clk_get(NULL, "ck_dpll1");
ck_ref_p = clk_get(NULL, "ck_ref");
info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
if (info != NULL) {
if (!cpu_is_omap15xx())
crystal_type = info->system_clock_type;
}
if (cpu_is_omap7xx())
ck_ref.rate = 13000000;
if (cpu_is_omap16xx() && crystal_type == 2)
ck_ref.rate = 19200000;
pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
"0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
omap_readw(ARM_CKCTL));
/* We want to be in syncronous scalable mode */

31
arch/arm/mach-omap1/devices.c
View File

@ -20,12 +20,11 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/mmc.h>
#include <plat/omap7xx.h>
#include <mach/omap7xx.h>
#include <mach/camera.h>
#include <mach/hardware.h>
@ -358,6 +357,33 @@ static inline void omap_init_uwire(void) {}
#endif
#define OMAP1_RNG_BASE 0xfffe5000
static struct resource omap1_rng_resources[] = {
{
.start = OMAP1_RNG_BASE,
.end = OMAP1_RNG_BASE + 0x4f,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap1_rng_device = {
.name = "omap_rng",
.id = -1,
.num_resources = ARRAY_SIZE(omap1_rng_resources),
.resource = omap1_rng_resources,
};
static void omap1_init_rng(void)
{
if (!cpu_is_omap16xx())
return;
(void) platform_device_register(&omap1_rng_device);
}
/*-------------------------------------------------------------------------*/
/*
* This gets called after board-specific INIT_MACHINE, and initializes most
* on-chip peripherals accessible on this board (except for few like USB):
@ -396,6 +422,7 @@ static int __init omap1_init_devices(void)
omap_init_spi100k();
omap_init_sti();
omap_init_uwire();
omap1_init_rng();
return 0;
}

8
arch/arm/mach-omap1/dma.c
View File

@ -27,7 +27,8 @@
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/irqs.h>
#include <mach/irqs.h>
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
@ -330,8 +331,9 @@ static int __init omap1_system_dma_init(void)
d->chan = kzalloc(sizeof(struct omap_dma_lch) *
(d->lch_count), GFP_KERNEL);
if (!d->chan) {
dev_err(&pdev->dev, "%s: Memory allocation failed"
"for d->chan!!!\n", __func__);
dev_err(&pdev->dev,
"%s: Memory allocation failed for d->chan!\n",
__func__);
goto exit_release_d;
}

1
arch/arm/mach-omap1/gpio15xx.c
View File

@ -17,6 +17,7 @@
*/
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
#define OMAP1510_GPIO_BASE 0xFFFCE000

1
arch/arm/mach-omap1/gpio16xx.c
View File

@ -17,6 +17,7 @@
*/
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#define OMAP1610_GPIO1_BASE 0xfffbe400
#define OMAP1610_GPIO2_BASE 0xfffbec00

1
arch/arm/mach-omap1/gpio7xx.c
View File

@ -17,6 +17,7 @@
*/
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#define OMAP7XX_GPIO1_BASE 0xfffbc000
#define OMAP7XX_GPIO2_BASE 0xfffbc800

2
arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
View File

@ -14,8 +14,6 @@
#ifndef __AMS_DELTA_FIQ_H
#define __AMS_DELTA_FIQ_H
#include <plat/irqs.h>
/*
* Interrupt number used for passing control from FIQ to IRQ.
* IRQ12, described as reserved, has been selected.

2
arch/arm/mach-omap1/include/mach/gpio.h
View File

@ -1,5 +1,3 @@
/*
* arch/arm/mach-omap1/include/mach/gpio.h
*/
#include <plat/gpio.h>

285
arch/arm/mach-omap1/include/mach/hardware.h
View File

@ -1,11 +1,46 @@
/*
* arch/arm/mach-omap1/include/mach/hardware.h
*
* Hardware definitions for TI OMAP processors and boards
*
* NOTE: Please put device driver specific defines into a separate header
* file for each driver.
*
* Copyright (C) 2001 RidgeRun, Inc.
* Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
*
* Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
* and Dirk Behme <dirk.behme@de.bosch.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
#ifndef __ASM_ARCH_OMAP_HARDWARE_H
#define __ASM_ARCH_OMAP_HARDWARE_H
#include <asm/sizes.h>
#ifndef __ASSEMBLER__
#include <asm/types.h>
#include <plat/cpu.h>
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void)
? 0 : OMAP_CS3_PHYS;
}
#endif
#endif /* ifndef __ASSEMBLER__ */
#include <plat/serial.h>
/*
* ---------------------------------------------------------------------------
* Common definitions for all OMAP processors
* NOTE: Put all processor or board specific parts to the special header
* files.
* ---------------------------------------------------------------------------
*/
/*
* ----------------------------------------------------------------------------
* Timers
* ----------------------------------------------------------------------------
*/
#define OMAP_MPU_TIMER1_BASE (0xfffec500)
#define OMAP_MPU_TIMER2_BASE (0xfffec600)
#define OMAP_MPU_TIMER3_BASE (0xfffec700)
#define MPU_TIMER_FREE (1 << 6)
#define MPU_TIMER_CLOCK_ENABLE (1 << 5)
#define MPU_TIMER_AR (1 << 1)
#define MPU_TIMER_ST (1 << 0)
/*
* ----------------------------------------------------------------------------
* Clocks
* ----------------------------------------------------------------------------
*/
#define CLKGEN_REG_BASE (0xfffece00)
#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
#define CK_RATEF 1
#define CK_IDLEF 2
#define CK_ENABLEF 4
#define CK_SELECTF 8
#define SETARM_IDLE_SHIFT
/* DPLL control registers */
#define DPLL_CTL (0xfffecf00)
/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
/*
* ---------------------------------------------------------------------------
* UPLD
* ---------------------------------------------------------------------------
*/
#define ULPD_REG_BASE (0xfffe0800)
#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
# define SOFT_UDC_REQ (1 << 4)
# define SOFT_USB_CLK_REQ (1 << 3)
# define SOFT_DPLL_REQ (1 << 0)
#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
# define DIS_MMC2_DPLL_REQ (1 << 11)
# define DIS_MMC1_DPLL_REQ (1 << 10)
# define DIS_UART3_DPLL_REQ (1 << 9)
# define DIS_UART2_DPLL_REQ (1 << 8)
# define DIS_UART1_DPLL_REQ (1 << 7)
# define DIS_USB_HOST_DPLL_REQ (1 << 6)
#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
/*
* ---------------------------------------------------------------------------
* Watchdog timer
* ---------------------------------------------------------------------------
*/
/* Watchdog timer within the OMAP3.2 gigacell */
#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
/*
* ---------------------------------------------------------------------------
* Interrupts
* ---------------------------------------------------------------------------
*/
#ifdef CONFIG_ARCH_OMAP1
/*
* XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
* or something similar.. -- PFM.
*/
#define OMAP_IH1_BASE 0xfffecb00
#define OMAP_IH2_BASE 0xfffe0000
#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
#define IRQ_ITR_REG_OFFSET 0x00
#define IRQ_MIR_REG_OFFSET 0x04
#define IRQ_SIR_IRQ_REG_OFFSET 0x10
#define IRQ_SIR_FIQ_REG_OFFSET 0x14
#define IRQ_CONTROL_REG_OFFSET 0x18
#define IRQ_ISR_REG_OFFSET 0x9c
#define IRQ_ILR0_REG_OFFSET 0x1c
#define IRQ_GMR_REG_OFFSET 0xa0
#endif
#include <plat/hardware.h>
/*
* ----------------------------------------------------------------------------
* System control registers
* ----------------------------------------------------------------------------
*/
#define MOD_CONF_CTRL_0 0xfffe1080
#define MOD_CONF_CTRL_1 0xfffe1110
/*
* ----------------------------------------------------------------------------
* Pin multiplexing registers
* ----------------------------------------------------------------------------
*/
#define FUNC_MUX_CTRL_0 0xfffe1000
#define FUNC_MUX_CTRL_1 0xfffe1004
#define FUNC_MUX_CTRL_2 0xfffe1008
#define COMP_MODE_CTRL_0 0xfffe100c
#define FUNC_MUX_CTRL_3 0xfffe1010
#define FUNC_MUX_CTRL_4 0xfffe1014
#define FUNC_MUX_CTRL_5 0xfffe1018
#define FUNC_MUX_CTRL_6 0xfffe101C
#define FUNC_MUX_CTRL_7 0xfffe1020
#define FUNC_MUX_CTRL_8 0xfffe1024
#define FUNC_MUX_CTRL_9 0xfffe1028
#define FUNC_MUX_CTRL_A 0xfffe102C
#define FUNC_MUX_CTRL_B 0xfffe1030
#define FUNC_MUX_CTRL_C 0xfffe1034
#define FUNC_MUX_CTRL_D 0xfffe1038
#define PULL_DWN_CTRL_0 0xfffe1040
#define PULL_DWN_CTRL_1 0xfffe1044
#define PULL_DWN_CTRL_2 0xfffe1048
#define PULL_DWN_CTRL_3 0xfffe104c
#define PULL_DWN_CTRL_4 0xfffe10ac
/* OMAP-1610 specific multiplexing registers */
#define FUNC_MUX_CTRL_E 0xfffe1090
#define FUNC_MUX_CTRL_F 0xfffe1094
#define FUNC_MUX_CTRL_10 0xfffe1098
#define FUNC_MUX_CTRL_11 0xfffe109c
#define FUNC_MUX_CTRL_12 0xfffe10a0
#define PU_PD_SEL_0 0xfffe10b4
#define PU_PD_SEL_1 0xfffe10b8
#define PU_PD_SEL_2 0xfffe10bc
#define PU_PD_SEL_3 0xfffe10c0
#define PU_PD_SEL_4 0xfffe10c4
/* Timer32K for 1610 and 1710*/
#define OMAP_TIMER32K_BASE 0xFFFBC400
/*
* ---------------------------------------------------------------------------
* TIPB bus interface
* ---------------------------------------------------------------------------
*/
#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
/*
* ----------------------------------------------------------------------------
* MPUI interface
* ----------------------------------------------------------------------------
*/
#define MPUI_BASE (0xfffec900)
#define MPUI_CTRL (MPUI_BASE + 0x0)
#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
/*
* ----------------------------------------------------------------------------
* LED Pulse Generator
* ----------------------------------------------------------------------------
*/
#define OMAP_LPG1_BASE 0xfffbd000
#define OMAP_LPG2_BASE 0xfffbd800
#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
/*
* ----------------------------------------------------------------------------
* Pulse-Width Light
* ----------------------------------------------------------------------------
*/
#define OMAP_PWL_BASE 0xfffb5800
#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
/*
* ---------------------------------------------------------------------------
* Processor specific defines
* ---------------------------------------------------------------------------
*/
#include "omap7xx.h"
#include "omap1510.h"
#include "omap16xx.h"
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */

267
arch/arm/mach-omap1/include/mach/irqs.h
View File

@ -1,5 +1,268 @@
/*
* arch/arm/mach-omap1/include/mach/irqs.h
* arch/arm/plat-omap/include/mach/irqs.h
*
* Copyright (C) Greg Lonnon 2001
* Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
* are different.
*/
#include <plat/irqs.h>
#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
#define __ASM_ARCH_OMAP15XX_IRQS_H
/*
* IRQ numbers for interrupt handler 1
*
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
*
*/
#define INT_CAMERA 1
#define INT_FIQ 3
#define INT_RTDX 6
#define INT_DSP_MMU_ABORT 7
#define INT_HOST 8
#define INT_ABORT 9
#define INT_BRIDGE_PRIV 13
#define INT_GPIO_BANK1 14
#define INT_UART3 15
#define INT_TIMER3 16
#define INT_DMA_CH0_6 19
#define INT_DMA_CH1_7 20
#define INT_DMA_CH2_8 21
#define INT_DMA_CH3 22
#define INT_DMA_CH4 23
#define INT_DMA_CH5 24
#define INT_TIMER1 26
#define INT_WD_TIMER 27
#define INT_BRIDGE_PUB 28
#define INT_TIMER2 30
#define INT_LCD_CTRL 31
/*
* OMAP-1510 specific IRQ numbers for interrupt handler 1
*/
#define INT_1510_IH2_IRQ 0
#define INT_1510_RES2 2
#define INT_1510_SPI_TX 4
#define INT_1510_SPI_RX 5
#define INT_1510_DSP_MAILBOX1 10
#define INT_1510_DSP_MAILBOX2 11
#define INT_1510_RES12 12
#define INT_1510_LB_MMU 17
#define INT_1510_RES18 18
#define INT_1510_LOCAL_BUS 29
/*
* OMAP-1610 specific IRQ numbers for interrupt handler 1
*/
#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
#define INT_1610_IH2_FIQ 2
#define INT_1610_McBSP2_TX 4
#define INT_1610_McBSP2_RX 5
#define INT_1610_DSP_MAILBOX1 10
#define INT_1610_DSP_MAILBOX2 11
#define INT_1610_LCD_LINE 12
#define INT_1610_GPTIMER1 17
#define INT_1610_GPTIMER2 18
#define INT_1610_SSR_FIFO_0 29
/*
* OMAP-7xx specific IRQ numbers for interrupt handler 1
*/
#define INT_7XX_IH2_FIQ 0
#define INT_7XX_IH2_IRQ 1
#define INT_7XX_USB_NON_ISO 2
#define INT_7XX_USB_ISO 3
#define INT_7XX_ICR 4
#define INT_7XX_EAC 5
#define INT_7XX_GPIO_BANK1 6
#define INT_7XX_GPIO_BANK2 7
#define INT_7XX_GPIO_BANK3 8
#define INT_7XX_McBSP2TX 10
#define INT_7XX_McBSP2RX 11
#define INT_7XX_McBSP2RX_OVF 12
#define INT_7XX_LCD_LINE 14
#define INT_7XX_GSM_PROTECT 15
#define INT_7XX_TIMER3 16
#define INT_7XX_GPIO_BANK5 17
#define INT_7XX_GPIO_BANK6 18
#define INT_7XX_SPGIO_WR 29
/*
* IRQ numbers for interrupt handler 2
*
* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
*/
#define IH2_BASE 32
#define INT_KEYBOARD (1 + IH2_BASE)
#define INT_uWireTX (2 + IH2_BASE)
#define INT_uWireRX (3 + IH2_BASE)
#define INT_I2C (4 + IH2_BASE)
#define INT_MPUIO (5 + IH2_BASE)
#define INT_USB_HHC_1 (6 + IH2_BASE)
#define INT_McBSP3TX (10 + IH2_BASE)
#define INT_McBSP3RX (11 + IH2_BASE)
#define INT_McBSP1TX (12 + IH2_BASE)
#define INT_McBSP1RX (13 + IH2_BASE)
#define INT_UART1 (14 + IH2_BASE)
#define INT_UART2 (15 + IH2_BASE)
#define INT_BT_MCSI1TX (16 + IH2_BASE)
#define INT_BT_MCSI1RX (17 + IH2_BASE)
#define INT_SOSSI_MATCH (19 + IH2_BASE)
#define INT_USB_W2FC (20 + IH2_BASE)
#define INT_1WIRE (21 + IH2_BASE)
#define INT_OS_TIMER (22 + IH2_BASE)
#define INT_MMC (23 + IH2_BASE)
#define INT_GAUGE_32K (24 + IH2_BASE)
#define INT_RTC_TIMER (25 + IH2_BASE)
#define INT_RTC_ALARM (26 + IH2_BASE)
#define INT_MEM_STICK (27 + IH2_BASE)
/*
* OMAP-1510 specific IRQ numbers for interrupt handler 2
*/
#define INT_1510_DSP_MMU (28 + IH2_BASE)
#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
/*
* OMAP-1610 specific IRQ numbers for interrupt handler 2
*/
#define INT_1610_FAC (0 + IH2_BASE)
#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
#define INT_1610_USB_OTG (8 + IH2_BASE)
#define INT_1610_SoSSI (9 + IH2_BASE)
#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
#define INT_1610_DSP_MMU (28 + IH2_BASE)
#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
#define INT_1610_STI (32 + IH2_BASE)
#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
#define INT_1610_GPTIMER3 (34 + IH2_BASE)
#define INT_1610_GPTIMER4 (35 + IH2_BASE)
#define INT_1610_GPTIMER5 (36 + IH2_BASE)
#define INT_1610_GPTIMER6 (37 + IH2_BASE)
#define INT_1610_GPTIMER7 (38 + IH2_BASE)
#define INT_1610_GPTIMER8 (39 + IH2_BASE)
#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
#define INT_1610_MMC2 (42 + IH2_BASE)
#define INT_1610_CF (43 + IH2_BASE)
#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
#define INT_1610_SPI (49 + IH2_BASE)
#define INT_1610_DMA_CH6 (53 + IH2_BASE)
#define INT_1610_DMA_CH7 (54 + IH2_BASE)
#define INT_1610_DMA_CH8 (55 + IH2_BASE)
#define INT_1610_DMA_CH9 (56 + IH2_BASE)
#define INT_1610_DMA_CH10 (57 + IH2_BASE)
#define INT_1610_DMA_CH11 (58 + IH2_BASE)
#define INT_1610_DMA_CH12 (59 + IH2_BASE)
#define INT_1610_DMA_CH13 (60 + IH2_BASE)
#define INT_1610_DMA_CH14 (61 + IH2_BASE)
#define INT_1610_DMA_CH15 (62 + IH2_BASE)
#define INT_1610_NAND (63 + IH2_BASE)
#define INT_1610_SHA1MD5 (91 + IH2_BASE)
/*
* OMAP-7xx specific IRQ numbers for interrupt handler 2
*/
#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
#define INT_7XX_CFCD (2 + IH2_BASE)
#define INT_7XX_CFIREQ (3 + IH2_BASE)
#define INT_7XX_I2C (4 + IH2_BASE)
#define INT_7XX_PCC (5 + IH2_BASE)
#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
#define INT_7XX_VLYNQ (9 + IH2_BASE)
#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
#define INT_7XX_McBSP1TX (11 + IH2_BASE)
#define INT_7XX_McBSP1RX (12 + IH2_BASE)
#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
#define INT_7XX_MCSI (16 + IH2_BASE)
#define INT_7XX_uWireTX (17 + IH2_BASE)
#define INT_7XX_uWireRX (18 + IH2_BASE)
#define INT_7XX_SMC_CD (19 + IH2_BASE)
#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
#define INT_7XX_TIMER32K (22 + IH2_BASE)
#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
#define INT_7XX_UPLD (24 + IH2_BASE)
#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
#define INT_7XX_USB_GENI (29 + IH2_BASE)
#define INT_7XX_USB_OTG (30 + IH2_BASE)
#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
#define INT_7XX_RNG (32 + IH2_BASE)
#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
#define INT_7XX_MPUIO (39 + IH2_BASE)
#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
#define INT_7XX_NAND (63 + IH2_BASE)
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
#define IH_GPIO_BASE (128 + IH2_BASE)
#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
#define OMAP_IRQ_END (IH_MPUIO_BASE + 16)
/* External FPGA handles interrupts on Innovator boards */
#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END)
#ifdef CONFIG_MACH_OMAP_INNOVATOR
#define OMAP_FPGA_NR_IRQS 24
#else
#define OMAP_FPGA_NR_IRQS 0
#endif
#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
#define NR_IRQS OMAP_FPGA_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
#include <mach/hardware.h>
#ifdef CONFIG_FIQ
#define FIQ_START 1024
#endif
#endif

3
arch/arm/plat-omap/include/plat/omap1510.h → arch/arm/mach-omap1/include/mach/omap1510.h
View File

@ -1,5 +1,4 @@
/* arch/arm/plat-omap/include/mach/omap1510.h
*
/*
* Hardware definitions for TI OMAP1510 processor.
*
* Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>

3
arch/arm/plat-omap/include/plat/omap16xx.h → arch/arm/mach-omap1/include/mach/omap16xx.h
View File

@ -1,5 +1,4 @@
/* arch/arm/plat-omap/include/mach/omap16xx.h
*
/*
* Hardware definitions for TI OMAP1610/5912/1710 processors.
*
* Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>

3
arch/arm/plat-omap/include/plat/omap7xx.h → arch/arm/mach-omap1/include/mach/omap7xx.h
View File

@ -1,5 +1,4 @@
/* arch/arm/plat-omap/include/mach/omap7xx.h
*
/*
* Hardware definitions for TI OMAP7XX processor.
*
* Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>

6
arch/arm/mach-omap1/lcd_dma.c
View File

@ -113,8 +113,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
if (cpu_is_omap15xx()) {
printk(KERN_ERR "DMA virtual resolution is not supported "
"in 1510 mode\n");
pr_err("DMA virtual resolution is not supported in 1510 mode\n");
BUG();
}
lcd_dma.vxres = vxres;
@ -437,8 +436,7 @@ static int __init omap_init_lcd_dma(void)
r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
"LCD DMA", NULL);
if (r != 0)
printk(KERN_ERR "unable to request IRQ for LCD DMA "
"(error %d)\n", r);
pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
return r;
}

13
arch/arm/mach-omap1/leds-h2p2-debug.c
View File

@ -14,6 +14,7 @@
#include <linux/kernel_stat.h>
#include <linux/sched.h>
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
#include <mach/hardware.h>
#include <asm/leds.h>
@ -68,11 +69,13 @@ void h2p2_dbg_leds_event(led_event_t evt)
gpio_set_value(GPIO_IDLE, 0);
}
__raw_writew(~0, &fpga->leds);
led_state &= ~LED_STATE_ENABLED;
if (evt == led_halted) {
iounmap(fpga);
fpga = NULL;
if (fpga) {
__raw_writew(~0, &fpga->leds);
if (evt == led_halted) {
iounmap(fpga);
fpga = NULL;
}
}
goto done;
@ -158,7 +161,7 @@ void h2p2_dbg_leds_event(led_event_t evt)
/*
* Actually burn the LEDs
*/
if (led_state & LED_STATE_ENABLED)
if (led_state & LED_STATE_ENABLED && fpga)
__raw_writew(~hw_led_state, &fpga->leds);
done:

1
arch/arm/mach-omap1/leds.c
View File

@ -6,6 +6,7 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_data/gpio-omap.h>
#include <asm/leds.h>
#include <asm/mach-types.h>

1
arch/arm/mach-omap1/serial.c
View File

@ -22,7 +22,6 @@
#include <asm/mach-types.h>
#include <plat/board.h>
#include <plat/mux.h>
#include <plat/fpga.h>

2
arch/arm/mach-omap1/timer.c
View File

@ -141,7 +141,7 @@ static int __init omap1_dm_timer_init(void)
pdata->set_timer_src = omap1_dm_timer_set_src;
pdata->timer_capability = OMAP_TIMER_ALWON |
OMAP_TIMER_NEEDS_RESET;
OMAP_TIMER_NEEDS_RESET | OMAP_TIMER_HAS_DSP_IRQ;
ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
if (ret) {

2
arch/arm/mach-omap2/Makefile
View File

@ -194,10 +194,12 @@ obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_interconnect_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
obj-$(CONFIG_OMAP3_EMU) += emu.o
obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o
# L3 interconnect
obj-$(CONFIG_ARCH_OMAP3) += omap_l3_smx.o

0
arch/arm/plat-omap/include/plat/am33xx.h → arch/arm/mach-omap2/am33xx.h
View File

6
arch/arm/mach-omap2/board-2430sdp.c
View File

@ -33,7 +33,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
@ -212,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = {
};
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
};
static struct twl4030_platform_data sdp2430_twldata = {
@ -235,7 +231,7 @@ static int __init omap2430_i2c_init(void)
sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
ARRAY_SIZE(sdp2430_i2c1_boardinfo));
omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
&sdp2430_twldata);
return 0;
}

10
arch/arm/mach-omap2/board-3430sdp.c
View File

@ -25,13 +25,11 @@
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/mcspi.h>
#include <plat/board.h>
#include <plat/usb.h>
#include "common.h"
#include <plat/dma.h>
@ -191,9 +189,6 @@ static struct omap_dss_board_info sdp3430_dss_data = {
.default_device = &sdp3430_lcd_device,
};
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@ -233,9 +228,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(16) | BIT(17),
.setup = sdp3430_twl_gpio_setup,
@ -576,8 +568,6 @@ static void __init omap_3430sdp_init(void)
int gpio_pendown;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
omap_hsmmc_init(mmc);
omap3430_i2c_init();
omap_display_init(&sdp3430_dss_data);

6
arch/arm/mach-omap2/board-3630sdp.c
View File

@ -17,7 +17,6 @@
#include <asm/mach/arch.h>
#include "common.h"
#include <plat/board.h>
#include <plat/gpmc-smc91x.h>
#include <plat/usb.h>
@ -67,9 +66,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
static struct omap_board_config_kernel sdp_config[] __initdata = {
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@ -197,8 +193,6 @@ static struct flash_partitions sdp_flash_partitions[] = {
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_board_config = sdp_config;
omap_board_config_size = ARRAY_SIZE(sdp_config);
zoom_peripherals_init();
omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);

6
arch/arm/mach-omap2/board-4430sdp.c
View File

@ -28,13 +28,11 @@
#include <linux/leds_pwm.h>
#include <linux/platform_data/omap4-keypad.h>
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
@ -45,6 +43,7 @@
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
#include "soc.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
@ -544,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.vibra = &twl6040_vibra,
.audpwron_gpio = 127,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
static struct twl4030_platform_data sdp4430_twldata = {
@ -581,7 +579,7 @@ static int __init omap4_i2c_init(void)
TWL_COMMON_REGULATOR_V1V8 |
TWL_COMMON_REGULATOR_V2V1);
omap4_pmic_init("twl6030", &sdp4430_twldata,
&twl6040_data, OMAP44XX_IRQ_SYS_2N);
&twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));

10
arch/arm/mach-omap2/board-am3517crane.c
View File

@ -21,12 +21,10 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
@ -37,11 +35,6 @@
#define GPIO_USB_POWER 35
#define GPIO_USB_NRESET 38
/* Board initialization */
static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@ -67,9 +60,6 @@ static void __init am3517_crane_init(void)
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap_board_config = am3517_crane_config;
omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
/* Configure GPIO for EHCI port */
if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",

11
arch/arm/mach-omap2/board-am3517evm.c
View File

@ -25,14 +25,13 @@
#include <linux/can/platform/ti_hecc.h>
#include <linux/davinci_emac.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
#include <mach/hardware.h>
#include <mach/am35xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <video/omapdss.h>
@ -296,8 +295,7 @@ static struct resource am3517_hecc_resources[] = {
.flags = IORESOURCE_MEM,
},
{
.start = INT_35XX_HECC0_IRQ,
.end = INT_35XX_HECC0_IRQ,
.start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
},
};
@ -324,9 +322,6 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
platform_device_register(&am3517_hecc_device);
}
static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@ -346,8 +341,6 @@ static struct omap2_hsmmc_info mmc[] = {
static void __init am3517_evm_init(void)
{
omap_board_config = am3517_evm_config;
omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
am3517_evm_i2c_init();

6
arch/arm/mach-omap2/board-apollon.c
View File

@ -29,13 +29,11 @@
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <plat/led.h>
#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
@ -204,7 +202,7 @@ static inline void __init apollon_init_smc91x(void)
return;
}
clk_enable(gpmc_fck);
clk_prepare_enable(gpmc_fck);
rate = clk_get_rate(gpmc_fck);
eth_cs = APOLLON_ETH_CS;
@ -248,7 +246,7 @@ static inline void __init apollon_init_smc91x(void)
gpmc_cs_free(APOLLON_ETH_CS);
}
out:
clk_disable(gpmc_fck);
clk_disable_unprepare(gpmc_fck);
clk_put(gpmc_fck);
}

10
arch/arm/mach-omap2/board-cm-t35.c
View File

@ -23,6 +23,7 @@
#include <linux/input/matrix_keypad.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
@ -37,7 +38,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include "common.h"
#include <plat/nand.h>
#include <plat/gpmc.h>
@ -470,9 +470,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
}
static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = cm_t35_twl_gpio_setup,
};
@ -714,13 +711,8 @@ static inline void cm_t35_init_mux(void) {}
static inline void cm_t3730_init_mux(void) {}
#endif
static struct omap_board_config_kernel cm_t35_config[] __initdata = {
};
static void __init cm_t3x_common_init(void)
{
omap_board_config = cm_t35_config;
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,

9
arch/arm/mach-omap2/board-cm-t3517.c
View File

@ -38,7 +38,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/nand.h>
@ -90,8 +89,7 @@ static struct resource cm_t3517_hecc_resources[] = {
.flags = IORESOURCE_MEM,
},
{
.start = INT_35XX_HECC0_IRQ,
.end = INT_35XX_HECC0_IRQ,
.start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
},
};
@ -249,9 +247,6 @@ static void __init cm_t3517_init_nand(void)
static inline void cm_t3517_init_nand(void) {}
#endif
static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
@ -285,8 +280,6 @@ static void __init cm_t3517_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap_board_config = cm_t3517_config;
omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
cm_t3517_init_leds();
cm_t3517_init_nand();
cm_t3517_init_rtc();

7
arch/arm/mach-omap2/board-devkit8000.c
View File

@ -32,15 +32,12 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <mach/hardware.h>
#include <mach/id.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
@ -56,7 +53,6 @@
#include <linux/interrupt.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
#include "hsmmc.h"
#include "common-board-devices.h"
@ -236,9 +232,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(15) | BIT(16) | BIT(17),

4
arch/arm/mach-omap2/board-flash.c
View File

@ -16,13 +16,14 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <plat/irqs.h>
#include <plat/cpu.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/onenand.h>
#include <plat/tc.h>
#include "common.h"
#include "board-flash.h"
#define REG_FPGA_REV 0x10
@ -140,7 +141,6 @@ __init board_nand_init(struct mtd_partition *nand_parts,
board_nand_data.devsize = nand_type;
board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
gpmc_nand_init(&board_nand_data);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */

2
arch/arm/mach-omap2/board-generic.c
View File

@ -16,11 +16,9 @@
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
#include "common.h"
#include "common-board-devices.h"

11
arch/arm/mach-omap2/board-h4.c
View File

@ -27,20 +27,19 @@
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include "common.h"
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/debug-devices.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include "common.h"
#include "mux.h"
#include "control.h"
@ -266,9 +265,9 @@ static inline void __init h4_init_debug(void)
return;
}
clk_enable(gpmc_fck);
clk_prepare_enable(gpmc_fck);
rate = clk_get_rate(gpmc_fck);
clk_disable(gpmc_fck);
clk_disable_unprepare(gpmc_fck);
clk_put(gpmc_fck);
if (is_gpmc_muxed())
@ -312,7 +311,7 @@ static inline void __init h4_init_debug(void)
gpmc_cs_free(eth_cs);
out:
clk_disable(gpmc_fck);
clk_disable_unprepare(gpmc_fck);
clk_put(gpmc_fck);
}

5
arch/arm/mach-omap2/board-igep0020.c
View File

@ -29,10 +29,10 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include <plat/onenand.h>
@ -425,9 +425,6 @@ static int igep_twl_gpio_setup(struct device *dev,
};
static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = igep_twl_gpio_setup,
};

7
arch/arm/mach-omap2/board-ldp.c
View File

@ -29,18 +29,14 @@
#include <linux/smsc911x.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/mcspi.h>
#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <mach/board-zoom.h>
#include <asm/delay.h>
#include <plat/usb.h>
#include <plat/gpmc-smsc911x.h>
@ -275,9 +271,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
}
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = ldp_twl_gpio_setup,
};

12
arch/arm/mach-omap2/board-n8x0.c
View File

@ -25,14 +25,11 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/board.h>
#include "common.h"
#include <plat/menelaus.h>
#include <mach/irqs.h>
#include <plat/mcspi.h>
#include <plat/onenand.h>
#include <plat/mmc.h>
#include <plat/serial.h>
#include "mux.h"
@ -553,8 +550,8 @@ static int n8x0_auto_sleep_regulators(void)
ret = menelaus_set_regulator_sleep(1, val);
if (ret < 0) {
printk(KERN_ERR "Could not set regulators to sleep on "
"menelaus: %u\n", ret);
pr_err("Could not set regulators to sleep on menelaus: %u\n",
ret);
return ret;
}
return 0;
@ -566,8 +563,7 @@ static int n8x0_auto_voltage_scale(void)
ret = menelaus_set_vcore_hw(1400, 1050);
if (ret < 0) {
printk(KERN_ERR "Could not set VCORE voltage on "
"menelaus: %u\n", ret);
pr_err("Could not set VCORE voltage on menelaus: %u\n", ret);
return ret;
}
return 0;
@ -600,7 +596,7 @@ static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
{
I2C_BOARD_INFO("menelaus", 0x72),
.irq = INT_24XX_SYS_NIRQ,
.irq = 7 + OMAP_INTC_START,
.platform_data = &n8x0_menelaus_platform_data,
},
};

5
arch/arm/mach-omap2/board-omap3beagle.c
View File

@ -33,13 +33,11 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <plat/board.h>
#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
@ -297,9 +295,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data beagle_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)

23
arch/arm/mach-omap2/board-omap3evm.c
View File

@ -40,12 +40,10 @@
#include <linux/mmc/host.h>
#include <linux/export.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include <plat/usb.h>
#include <plat/nand.h>
#include "common.h"
@ -75,6 +73,18 @@
#define OMAP3EVM_GEN1_ETHR_GPIO_RST 64
#define OMAP3EVM_GEN2_ETHR_GPIO_RST 7
/*
* OMAP35x EVM revision
* Run time detection of EVM revision is done by reading Ethernet
* PHY ID -
* GEN_1 = 0x01150000
* GEN_2 = 0x92200000
*/
enum {
OMAP3EVM_BOARD_GEN_1 = 0, /* EVM Rev between A - D */
OMAP3EVM_BOARD_GEN_2, /* EVM Rev >= Rev E */
};
static u8 omap3_evm_version;
u8 get_omap3_evm_rev(void)
@ -377,9 +387,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = omap3evm_twl_gpio_setup,
};
@ -526,9 +533,6 @@ static int __init omap3_evm_i2c_init(void)
return 0;
}
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
};
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@ -688,9 +692,6 @@ static void __init omap3_evm_init(void)
obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
omap3_mux_init(obm, OMAP_PACKAGE_CBB);
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);

18
arch/arm/mach-omap2/board-omap3logic.c
View File

@ -30,24 +30,21 @@
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
#include <plat/mux.h>
#include <plat/board.h>
#include "common.h"
#include <plat/gpmc-smsc911x.h>
#include <plat/gpmc.h>
#include <plat/sdrc.h>
#include <plat/usb.h>
#include "common.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
#define OMAP3LOGIC_SMSC911X_CS 1
#define OMAP3530_LV_SOM_MMC_GPIO_CD 110
@ -78,9 +75,6 @@ static struct regulator_init_data omap3logic_vmmc1 = {
};
static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8)

5
arch/arm/mach-omap2/board-omap3pandora.c
View File

@ -40,9 +40,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include "common.h"
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
#include <video/omapdss.h>
@ -321,9 +319,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = omap3pandora_twl_gpio_setup,
};

15
arch/arm/mach-omap2/board-omap3stalker.c
View File

@ -28,14 +28,17 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/smsc911x.h>
#include <linux/i2c/at24.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
@ -279,9 +282,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = omap3stalker_twl_gpio_setup,
};
@ -362,9 +362,6 @@ static int __init omap3_stalker_i2c_init(void)
#define OMAP3_STALKER_TS_GPIO 175
static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
};
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
@ -399,8 +396,6 @@ static void __init omap3_stalker_init(void)
{
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_board_config = omap3_stalker_config;
omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
omap_hsmmc_init(mmc);

5
arch/arm/mach-omap2/board-omap3touchbook.c
View File

@ -37,14 +37,12 @@
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/system_info.h>
#include <plat/board.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/nand.h>
@ -139,9 +137,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data touchbook_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)

8
arch/arm/mach-omap2/board-omap4panda.c
View File

@ -32,19 +32,18 @@
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <video/omapdss.h>
#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-tfp410.h>
#include "soc.h"
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
@ -172,7 +171,7 @@ static void __init omap4_ehci_init(void)
return;
}
clk_set_rate(phy_ref_clk, 19200000);
clk_enable(phy_ref_clk);
clk_prepare_enable(phy_ref_clk);
/* disable the power to the usb hub prior to init and reset phy+hub */
ret = gpio_request_array(panda_ehci_gpios,
@ -263,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = {
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.audpwron_gpio = 127,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
/* Panda board uses the common PMIC configuration */
@ -294,7 +292,7 @@ static int __init omap4_panda_i2c_init(void)
TWL_COMMON_REGULATOR_V1V8 |
TWL_COMMON_REGULATOR_V2V1);
omap4_pmic_init("twl6030", &omap4_panda_twldata,
&twl6040_data, OMAP44XX_IRQ_SYS_2N);
&twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP

12
arch/arm/mach-omap2/board-overo.c
View File

@ -42,16 +42,13 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
#include <plat/mcspi.h>
#include <plat/mux.h>
#include <plat/usb.h>
#include "mux.h"
@ -399,9 +396,6 @@ static int overo_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data overo_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = overo_twl_gpio_setup,
};
@ -522,8 +516,7 @@ static void __init overo_init(void)
udelay(10);
gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
} else {
printk(KERN_ERR "could not obtain gpio for "
"OVERO_GPIO_W2W_NRESET\n");
pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
}
ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
@ -542,8 +535,7 @@ static void __init overo_init(void)
if (ret == 0)
gpio_export(OVERO_GPIO_USBH_CPEN, 0);
else
printk(KERN_ERR "could not obtain gpio for "
"OVERO_GPIO_USBH_CPEN\n");
pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
}
MACHINE_START(OVERO, "Gumstix Overo")

6
arch/arm/mach-omap2/board-rm680.c
View File

@ -27,6 +27,7 @@
#include <plat/gpmc.h>
#include "common.h"
#include <plat/onenand.h>
#include <plat/serial.h>
#include "mux.h"
#include "hsmmc.h"
@ -72,9 +73,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = {
/* TWL */
static struct twl4030_gpio_platform_data rm680_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.pullups = BIT(0),
.pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
};
@ -87,7 +85,7 @@ static struct twl4030_platform_data rm680_twl_data = {
static void __init rm680_i2c_init(void)
{
omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
}

6
arch/arm/mach-omap2/board-rx51-peripherals.c
View File

@ -28,7 +28,6 @@
#include <asm/system_info.h>
#include <plat/mcspi.h>
#include <plat/board.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
@ -774,9 +773,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
}
static struct twl4030_gpio_platform_data rx51_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3)
| BIT(4) | BIT(5)
| BIT(8) | BIT(9) | BIT(10) | BIT(11)
@ -1051,7 +1047,7 @@ static int __init rx51_i2c_init(void)
rx51_twldata.vdac->constraints.apply_uV = true;
rx51_twldata.vdac->constraints.name = "VDAC";
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)

2
arch/arm/mach-omap2/board-rx51.c
View File

@ -18,13 +18,11 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/mcspi.h>
#include <plat/board.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>

8
arch/arm/mach-omap2/board-ti8168evm.c
View File

@ -15,13 +15,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/irqs.h>
#include <plat/board.h>
#include "common.h"
#include <plat/usb.h>
@ -32,15 +29,10 @@ static struct omap_musb_board_data musb_board_data = {
.power = 500,
};
static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = {
};
static void __init ti81xx_evm_init(void)
{
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap_board_config = ti81xx_evm_config;
omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config);
usb_musb_init(&musb_board_data);
}

10
arch/arm/mach-omap2/board-zoom-debugboard.c
View File

@ -22,6 +22,9 @@
#include <mach/board-zoom.h>
#include "soc.h"
#include "common.h"
#define ZOOM_SMSC911X_CS 7
#define ZOOM_SMSC911X_GPIO 158
#define ZOOM_QUADUART_CS 3
@ -81,8 +84,7 @@ static inline void __init zoom_init_quaduart(void)
quart_cs = ZOOM_QUADUART_CS;
if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed to request GPMC mem"
"for Quad UART(TL16CP754C)\n");
pr_err("Failed to request GPMC mem for Quad UART(TL16CP754C)\n");
return;
}
@ -104,8 +106,8 @@ static inline int omap_zoom_debugboard_detect(void)
if (gpio_request_one(debug_board_detect, GPIOF_IN,
"Zoom debug board detect") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
"board detect\n", debug_board_detect);
pr_err("Failed to request GPIO%d for Zoom debug board detect\n",
debug_board_detect);
return 0;
}

2
arch/arm/mach-omap2/board-zoom-display.c
View File

@ -18,6 +18,8 @@
#include <video/omapdss.h>
#include <mach/board-zoom.h>
#include "common.h"
#define LCD_PANEL_RESET_GPIO_PROD 96
#define LCD_PANEL_RESET_GPIO_PILOT 55
#define LCD_PANEL_QVGA_GPIO 56

6
arch/arm/mach-omap2/board-zoom-peripherals.c
View File

@ -19,6 +19,7 @@
#include <linux/regulator/fixed.h>
#include <linux/wl12xx.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -251,9 +252,6 @@ static void zoom2_set_hs_extmute(int mute)
}
static struct twl4030_gpio_platform_data zoom_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = zoom_twl_gpio_setup,
};
@ -281,7 +279,7 @@ static int __init omap_i2c_init(void)
codec_data->hs_extmute = 1;
codec_data->set_hs_extmute = zoom2_set_hs_extmute;
}
omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;

1
arch/arm/mach-omap2/board-zoom.c
View File

@ -22,7 +22,6 @@
#include <asm/mach/arch.h>
#include "common.h"
#include <plat/board.h>
#include <plat/usb.h>
#include <mach/board-zoom.h>

2
arch/arm/mach-omap2/clkt2xxx_apll.c
View File

@ -59,7 +59,7 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
OMAP24XX_CM_IDLEST_VAL, clk->name);
OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk));
/*
* REVISIT: Should we return an error code if omap2_wait_clock_ready()

12
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
View File

@ -33,11 +33,11 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
@ -68,14 +68,15 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk)
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
{
const struct prcm_config *ptr;
long highest_rate;
long highest_rate, sys_clk_rate;
highest_rate = -EINVAL;
sys_clk_rate = __clk_get_rate(sclk);
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
if (!(ptr->flags & cpu_mask))
continue;
if (ptr->xtal_speed != sclk->rate)
if (ptr->xtal_speed != sys_clk_rate)
continue;
highest_rate = ptr->mpu_speed;
@ -94,12 +95,15 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
const struct prcm_config *prcm;
unsigned long found_speed = 0;
unsigned long flags;
long sys_clk_rate;
sys_clk_rate = __clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sclk->rate)
if (prcm->xtal_speed != sys_clk_rate)
continue;
if (prcm->mpu_speed <= rate) {

30
arch/arm/mach-omap2/clkt34xx_dpll3m2.c
View File

@ -56,6 +56,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
struct omap_sdrc_params *sdrc_cs0;
struct omap_sdrc_params *sdrc_cs1;
int ret;
unsigned long clkrate;
if (!clk || !rate)
return -EINVAL;
@ -64,11 +65,12 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
if (validrate != rate)
return -EINVAL;
sdrcrate = sdrc_ick_p->rate;
if (rate > clk->rate)
sdrcrate <<= ((rate / clk->rate) >> 1);
sdrcrate = __clk_get_rate(sdrc_ick_p);
clkrate = __clk_get_rate(clk);
if (rate > clkrate)
sdrcrate <<= ((rate / clkrate) >> 1);
else
sdrcrate >>= ((clk->rate / rate) >> 1);
sdrcrate >>= ((clkrate / rate) >> 1);
ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
if (ret)
@ -82,7 +84,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
/*
* XXX This only needs to be done when the CPU frequency changes
*/
_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
_mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
c += 1; /* for safety */
c *= SDRC_MPURATE_LOOPS;
@ -90,28 +92,26 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
if (c == 0)
c = 1;
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
validrate);
pr_debug("clock: SDRC CS0 timing params used:"
" RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
clkrate, validrate);
pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
if (sdrc_cs1)
pr_debug("clock: SDRC CS1 timing params used: "
" RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
if (sdrc_cs1)
omap3_configure_core_dpll(
new_div, unlock_dll, c, rate > clk->rate,
new_div, unlock_dll, c, rate > clkrate,
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
else
omap3_configure_core_dpll(
new_div, unlock_dll, c, rate > clk->rate,
new_div, unlock_dll, c, rate > clkrate,
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
0, 0, 0, 0);

94
arch/arm/mach-omap2/clkt_clksel.c
View File

@ -71,8 +71,8 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk,
if (!clks->parent) {
/* This indicates a data problem */
WARN(1, "clock: Could not find parent clock %s in clksel array "
"of clock %s\n", src_clk->name, clk->name);
WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
__clk_get_name(clk), __clk_get_name(src_clk));
return NULL;
}
@ -126,8 +126,9 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
if (max_div == 0) {
/* This indicates an error in the clksel data */
WARN(1, "clock: Could not find divisor for clock %s parent %s"
"\n", clk->name, src_clk->parent->name);
WARN(1, "clock: %s: could not find divisor for parent %s\n",
__clk_get_name(clk),
__clk_get_name(__clk_get_parent(src_clk)));
return 0;
}
@ -176,8 +177,10 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
struct clk *parent;
clks = _get_clksel_by_parent(clk, clk->parent);
parent = __clk_get_parent(clk);
clks = _get_clksel_by_parent(clk, parent);
if (!clks)
return 0;
@ -191,8 +194,8 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
if (!clkr->div) {
/* This indicates a data error */
WARN(1, "clock: Could not find fieldval %d for clock %s parent "
"%s\n", field_val, clk->name, clk->parent->name);
WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
__clk_get_name(clk), field_val, __clk_get_name(parent));
return 0;
}
@ -213,11 +216,13 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
struct clk *parent;
/* should never happen */
WARN_ON(div == 0);
clks = _get_clksel_by_parent(clk, clk->parent);
parent = __clk_get_parent(clk);
clks = _get_clksel_by_parent(clk, parent);
if (!clks)
return ~0;
@ -230,8 +235,8 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
}
if (!clkr->div) {
pr_err("clock: Could not find divisor %d for clock %s parent "
"%s\n", div, clk->name, clk->parent->name);
pr_err("clock: %s: could not find divisor %d for parent %s\n",
__clk_get_name(clk), div, __clk_get_name(parent));
return ~0;
}
@ -281,16 +286,23 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
const struct clksel *clks;
const struct clksel_rate *clkr;
u32 last_div = 0;
struct clk *parent;
unsigned long parent_rate;
const char *clk_name;
parent = __clk_get_parent(clk);
parent_rate = __clk_get_rate(parent);
clk_name = __clk_get_name(clk);
if (!clk->clksel || !clk->clksel_mask)
return ~0;
pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
clk->name, target_rate);
clk_name, target_rate);
*new_div = 1;
clks = _get_clksel_by_parent(clk, clk->parent);
clks = _get_clksel_by_parent(clk, parent);
if (!clks)
return ~0;
@ -300,30 +312,29 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
/* Sanity check */
if (clkr->div <= last_div)
pr_err("clock: clksel_rate table not sorted "
"for clock %s", clk->name);
pr_err("clock: %s: clksel_rate table not sorted\n",
clk_name);
last_div = clkr->div;
test_rate = clk->parent->rate / clkr->div;
test_rate = parent_rate / clkr->div;
if (test_rate <= target_rate)
break; /* found it */
}
if (!clkr->div) {
pr_err("clock: Could not find divisor for target "
"rate %ld for clock %s parent %s\n", target_rate,
clk->name, clk->parent->name);
pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
clk_name, target_rate, __clk_get_name(parent));
return ~0;
}
*new_div = clkr->div;
pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
(clk->parent->rate / clkr->div));
(parent_rate / clkr->div));
return clk->parent->rate / clkr->div;
return parent_rate / clkr->div;
}
/*
@ -345,10 +356,15 @@ void omap2_init_clksel_parent(struct clk *clk)
const struct clksel *clks;
const struct clksel_rate *clkr;
u32 r, found = 0;
struct clk *parent;
const char *clk_name;
if (!clk->clksel || !clk->clksel_mask)
return;
parent = __clk_get_parent(clk);
clk_name = __clk_get_name(clk);
r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
r >>= __ffs(clk->clksel_mask);
@ -358,12 +374,13 @@ void omap2_init_clksel_parent(struct clk *clk)
continue;
if (clkr->val == r) {
if (clk->parent != clks->parent) {
pr_debug("clock: inited %s parent "
"to %s (was %s)\n",
clk->name, clks->parent->name,
((clk->parent) ?
clk->parent->name : "NULL"));
if (parent != clks->parent) {
pr_debug("clock: %s: inited parent to %s (was %s)\n",
clk_name,
__clk_get_name(clks->parent),
((parent) ?
__clk_get_name(parent) :
"NULL"));
clk_reparent(clk, clks->parent);
};
found = 1;
@ -373,7 +390,7 @@ void omap2_init_clksel_parent(struct clk *clk)
/* This indicates a data error */
WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
clk->name, r);
clk_name, r);
return;
}
@ -391,15 +408,17 @@ unsigned long omap2_clksel_recalc(struct clk *clk)
{
unsigned long rate;
u32 div = 0;
struct clk *parent;
div = _read_divisor(clk);
if (div == 0)
return clk->rate;
return __clk_get_rate(clk);
rate = clk->parent->rate / div;
parent = __clk_get_parent(clk);
rate = __clk_get_rate(parent) / div;
pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name,
rate, div);
pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n",
__clk_get_name(clk), rate, div);
return rate;
}
@ -454,9 +473,10 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
_write_clksel_reg(clk, field_val);
clk->rate = clk->parent->rate / new_div;
clk->rate = __clk_get_rate(__clk_get_parent(clk)) / new_div;
pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate);
pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(clk),
__clk_get_rate(clk));
return 0;
}
@ -498,13 +518,15 @@ int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
clk_reparent(clk, new_parent);
/* CLKSEL clocks follow their parents' rates, divided by a divisor */
clk->rate = new_parent->rate;
clk->rate = __clk_get_rate(new_parent);
if (parent_div > 0)
clk->rate /= parent_div;
__clk_get_rate(clk) /= parent_div;
pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
clk->name, clk->parent->name, clk->rate);
__clk_get_name(clk),
__clk_get_name(__clk_get_parent(clk)),
__clk_get_rate(clk));
return 0;
}

40
arch/arm/mach-omap2/clkt_dpll.c
View File

@ -22,8 +22,8 @@
#include <asm/div64.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include "soc.h"
#include "clock.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
@ -87,7 +87,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
fint = clk->parent->rate / n;
fint = __clk_get_rate(__clk_get_parent(clk)) / n;
if (cpu_is_omap24xx()) {
/* Should not be called for OMAP2, so warn if it is called */
@ -105,13 +105,13 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
}
if (fint < fint_min) {
pr_debug("rejecting n=%d due to Fint failure, "
"lowering max_divider\n", n);
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
} else if (fint > fint_max) {
pr_debug("rejecting n=%d due to Fint failure, "
"boosting min_divider\n", n);
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
} else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
@ -211,7 +211,7 @@ void omap2_init_dpll_parent(struct clk *clk)
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
clk_reparent(clk, dd->clk_bypass);
} else if (cpu_is_omap44xx()) {
} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
@ -252,16 +252,16 @@ u32 omap2_get_dpll_rate(struct clk *clk)
if (cpu_is_omap24xx()) {
if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
v == OMAP2XXX_EN_DPLL_FRBYPASS)
return dd->clk_bypass->rate;
return __clk_get_rate(dd->clk_bypass);
} else if (cpu_is_omap34xx()) {
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
return dd->clk_bypass->rate;
} else if (cpu_is_omap44xx()) {
return __clk_get_rate(dd->clk_bypass);
} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
return dd->clk_bypass->rate;
return __clk_get_rate(dd->clk_bypass);
}
v = __raw_readl(dd->mult_div1_reg);
@ -270,7 +270,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
dpll_div = v & dd->div1_mask;
dpll_div >>= __ffs(dd->div1_mask);
dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
do_div(dpll_clk, dpll_div + 1);
return dpll_clk;
@ -296,16 +296,20 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
unsigned long scaled_rt_rp;
unsigned long new_rate = 0;
struct dpll_data *dd;
unsigned long ref_rate;
const char *clk_name;
if (!clk || !clk->dpll_data)
return ~0;
dd = clk->dpll_data;
ref_rate = __clk_get_rate(dd->clk_ref);
clk_name = __clk_get_name(clk);
pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
clk->name, target_rate);
clk_name, target_rate);
scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
dd->last_rounded_rate = 0;
@ -332,14 +336,14 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
break;
r = _dpll_test_mult(&m, n, &new_rate, target_rate,
dd->clk_ref->rate);
ref_rate);
/* m can't be set low enough for this n - try with a larger n */
if (r == DPLL_MULT_UNDERFLOW)
continue;
pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n",
clk->name, m, n, new_rate);
clk_name, m, n, new_rate);
if (target_rate == new_rate) {
dd->last_rounded_m = m;
@ -350,8 +354,8 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
}
if (target_rate != new_rate) {
pr_debug("clock: %s: cannot round to rate %ld\n", clk->name,
target_rate);
pr_debug("clock: %s: cannot round to rate %ld\n",
clk_name, target_rate);
return ~0;
}

35
arch/arm/mach-omap2/clock.c
View File

@ -22,14 +22,16 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <trace/events/power.h>
#include <asm/cpu.h>
#include <plat/clock.h>
#include "clockdomain.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include <trace/events/power.h>
#include "soc.h"
#include "clockdomain.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
@ -76,7 +78,7 @@ static void _omap2_module_wait_ready(struct clk *clk)
clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
clk->name);
__clk_get_name(clk));
}
/* Public functions */
@ -92,18 +94,21 @@ static void _omap2_module_wait_ready(struct clk *clk)
void omap2_init_clk_clkdm(struct clk *clk)
{
struct clockdomain *clkdm;
const char *clk_name;
if (!clk->clkdm_name)
return;
clk_name = __clk_get_name(clk);
clkdm = clkdm_lookup(clk->clkdm_name);
if (clkdm) {
pr_debug("clock: associated clk %s to clkdm %s\n",
clk->name, clk->clkdm_name);
clk_name, clk->clkdm_name);
clk->clkdm = clkdm;
} else {
pr_debug("clock: could not associate clk %s to "
"clkdm %s\n", clk->name, clk->clkdm_name);
pr_debug("clock: could not associate clk %s to clkdm %s\n",
clk_name, clk->clkdm_name);
}
}
@ -226,8 +231,7 @@ void omap2_dflt_clk_disable(struct clk *clk)
* 'Independent' here refers to a clock which is not
* controlled by its parent.
*/
printk(KERN_ERR "clock: clk_disable called on independent "
"clock %s which has no enable_reg\n", clk->name);
pr_err("clock: clk_disable called on independent clock %s which has no enable_reg\n", clk->name);
return;
}
@ -270,8 +274,7 @@ const struct clkops clkops_omap2_dflt = {
void omap2_clk_disable(struct clk *clk)
{
if (clk->usecount == 0) {
WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
"already 0?", clk->name);
WARN(1, "clock: %s: omap2_clk_disable() called, but usecount already 0?", clk->name);
return;
}
@ -332,8 +335,8 @@ int omap2_clk_enable(struct clk *clk)
if (clkdm_control && clk->clkdm) {
ret = clkdm_clk_enable(clk->clkdm, clk);
if (ret) {
WARN(1, "clock: %s: could not enable clockdomain %s: "
"%d\n", clk->name, clk->clkdm->name, ret);
WARN(1, "clock: %s: could not enable clockdomain %s: %d\n",
clk->name, clk->clkdm->name, ret);
goto oce_err2;
}
}
@ -501,10 +504,8 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
hfclkin_rate = clk_get_rate(hfclkin_ck);
pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
"%ld.%01ld/%ld/%ld MHz\n",
(hfclkin_rate / 1000000),
((hfclkin_rate / 100000) % 10),
pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
(hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10),
(clk_get_rate(core_ck) / 1000000),
(clk_get_rate(mpu_ck) / 1000000));
}

26
arch/arm/mach-omap2/clock2420_data.c
View File

@ -18,9 +18,9 @@
#include <linux/clk.h>
#include <linux/list.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
@ -1804,6 +1804,7 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "gfx_ick", &gfx_ick, CK_242X),
/* DSS domain clocks */
CLK("omapdss_dss", "ick", &dss_ick, CK_242X),
CLK(NULL, "dss_ick", &dss_ick, CK_242X),
CLK(NULL, "dss1_fck", &dss1_fck, CK_242X),
CLK(NULL, "dss2_fck", &dss2_fck, CK_242X),
CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_242X),
@ -1843,12 +1844,16 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "gpt12_ick", &gpt12_ick, CK_242X),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_242X),
CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_242X),
CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_242X),
CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_242X),
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_242X),
CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_242X),
CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_242X),
CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_242X),
CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_242X),
CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_242X),
CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_242X),
CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_242X),
CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_242X),
CLK(NULL, "uart1_ick", &uart1_ick, CK_242X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_242X),
@ -1859,12 +1864,15 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "gpios_ick", &gpios_ick, CK_242X),
CLK(NULL, "gpios_fck", &gpios_fck, CK_242X),
CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X),
CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_242X),
CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_242X),
CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X),
CLK("omap24xxcam", "fck", &cam_fck, CK_242X),
CLK(NULL, "cam_fck", &cam_fck, CK_242X),
CLK("omap24xxcam", "ick", &cam_ick, CK_242X),
CLK(NULL, "cam_ick", &cam_ick, CK_242X),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_242X),
CLK(NULL, "wdt4_ick", &wdt4_ick, CK_242X),
CLK(NULL, "wdt4_fck", &wdt4_fck, CK_242X),
@ -1873,16 +1881,22 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "mspro_ick", &mspro_ick, CK_242X),
CLK(NULL, "mspro_fck", &mspro_fck, CK_242X),
CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X),
CLK(NULL, "mmc_ick", &mmc_ick, CK_242X),
CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X),
CLK(NULL, "mmc_fck", &mmc_fck, CK_242X),
CLK(NULL, "fac_ick", &fac_ick, CK_242X),
CLK(NULL, "fac_fck", &fac_fck, CK_242X),
CLK(NULL, "eac_ick", &eac_ick, CK_242X),
CLK(NULL, "eac_fck", &eac_fck, CK_242X),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X),
CLK(NULL, "hdq_ick", &hdq_ick, CK_242X),
CLK("omap_hdq.0", "fck", &hdq_fck, CK_242X),
CLK(NULL, "hdq_fck", &hdq_fck, CK_242X),
CLK("omap_i2c.1", "ick", &i2c1_ick, CK_242X),
CLK(NULL, "i2c1_ick", &i2c1_ick, CK_242X),
CLK(NULL, "i2c1_fck", &i2c1_fck, CK_242X),
CLK("omap_i2c.2", "ick", &i2c2_ick, CK_242X),
CLK(NULL, "i2c2_ick", &i2c2_ick, CK_242X),
CLK(NULL, "i2c2_fck", &i2c2_fck, CK_242X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X),
CLK(NULL, "sdma_fck", &sdma_fck, CK_242X),
@ -1892,14 +1906,18 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X),
CLK(NULL, "des_ick", &des_ick, CK_242X),
CLK("omap-sham", "ick", &sha_ick, CK_242X),
CLK(NULL, "sha_ick", &sha_ick, CK_242X),
CLK("omap_rng", "ick", &rng_ick, CK_242X),
CLK(NULL, "rng_ick", &rng_ick, CK_242X),
CLK("omap-aes", "ick", &aes_ick, CK_242X),
CLK(NULL, "aes_ick", &aes_ick, CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb-hdrc", "fck", &osc_ck, CK_242X),
CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X),
CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X),
CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X),
CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_242X),
CLK(NULL, "timer_sys_ck", &sys_ck, CK_242X),
CLK(NULL, "timer_ext_ck", &alt_ck, CK_242X),
CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_242X),
};
/*

2
arch/arm/mach-omap2/clock2430.c
View File

@ -21,9 +21,9 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/hardware.h>
#include <plat/clock.h>
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"

26
arch/arm/mach-omap2/clock2430_data.c
View File

@ -17,9 +17,9 @@
#include <linux/clk.h>
#include <linux/list.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
@ -1856,6 +1856,7 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X),
CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X),
CLK("twl", "fck", &osc_ck, CK_243X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_243X),
@ -1887,6 +1888,7 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
/* DSS domain clocks */
CLK("omapdss_dss", "ick", &dss_ick, CK_243X),
CLK(NULL, "dss_ick", &dss_ick, CK_243X),
CLK(NULL, "dss1_fck", &dss1_fck, CK_243X),
CLK(NULL, "dss2_fck", &dss2_fck, CK_243X),
CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X),
@ -1926,20 +1928,28 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X),
CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X),
CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X),
CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_243X),
CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_243X),
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X),
CLK(NULL, "mcbsp2_ick", &mcbsp2_ick, CK_243X),
CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_243X),
CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X),
CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_243X),
CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_243X),
CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X),
CLK(NULL, "mcbsp4_ick", &mcbsp4_ick, CK_243X),
CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_243X),
CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X),
CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_243X),
CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_243X),
CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X),
CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_243X),
CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_243X),
CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X),
CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_243X),
CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_243X),
CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X),
CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_243X),
CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_243X),
CLK(NULL, "uart1_ick", &uart1_ick, CK_243X),
CLK(NULL, "uart1_fck", &uart1_fck, CK_243X),
@ -1950,13 +1960,16 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "gpios_ick", &gpios_ick, CK_243X),
CLK(NULL, "gpios_fck", &gpios_fck, CK_243X),
CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X),
CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick, CK_243X),
CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X),
CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X),
CLK(NULL, "icr_ick", &icr_ick, CK_243X),
CLK("omap24xxcam", "fck", &cam_fck, CK_243X),
CLK(NULL, "cam_fck", &cam_fck, CK_243X),
CLK("omap24xxcam", "ick", &cam_ick, CK_243X),
CLK(NULL, "cam_ick", &cam_ick, CK_243X),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X),
CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X),
CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X),
@ -1965,10 +1978,14 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "fac_ick", &fac_ick, CK_243X),
CLK(NULL, "fac_fck", &fac_fck, CK_243X),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X),
CLK(NULL, "hdq_ick", &hdq_ick, CK_243X),
CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X),
CLK(NULL, "hdq_fck", &hdq_fck, CK_243X),
CLK("omap_i2c.1", "ick", &i2c1_ick, CK_243X),
CLK(NULL, "i2c1_ick", &i2c1_ick, CK_243X),
CLK(NULL, "i2chs1_fck", &i2chs1_fck, CK_243X),
CLK("omap_i2c.2", "ick", &i2c2_ick, CK_243X),
CLK(NULL, "i2c2_ick", &i2c2_ick, CK_243X),
CLK(NULL, "i2chs2_fck", &i2chs2_fck, CK_243X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X),
CLK(NULL, "sdma_fck", &sdma_fck, CK_243X),
@ -1977,22 +1994,29 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "des_ick", &des_ick, CK_243X),
CLK("omap-sham", "ick", &sha_ick, CK_243X),
CLK("omap_rng", "ick", &rng_ick, CK_243X),
CLK(NULL, "rng_ick", &rng_ick, CK_243X),
CLK("omap-aes", "ick", &aes_ick, CK_243X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X),
CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X),
CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X),
CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_243X),
CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_243X),
CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_243X),
CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_243X),
CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_243X),
CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_243X),
CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X),
CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X),
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck, CK_243X),
CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck, CK_243X),
CLK(NULL, "timer_32k_ck", &func_32k_ck, CK_243X),
CLK(NULL, "timer_sys_ck", &sys_ck, CK_243X),
CLK(NULL, "timer_ext_ck", &alt_ck, CK_243X),
CLK(NULL, "cpufreq_ck", &virt_prcm_set, CK_243X),
};
/*

2
arch/arm/mach-omap2/clock2xxx.c
View File

@ -22,9 +22,9 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm.h"

5
arch/arm/mach-omap2/clock33xx_data.c
View File

@ -18,8 +18,8 @@
#include <linux/list.h>
#include <linux/clk.h>
#include <plat/clkdev_omap.h>
#include <plat/am33xx.h>
#include "am33xx.h"
#include "iomap.h"
#include "control.h"
#include "clock.h"
@ -1013,6 +1013,7 @@ static struct omap_clk am33xx_clks[] = {
CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX),
CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX),
CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX),
CLK("cpu0", NULL, &dpll_mpu_ck, CK_AM33XX),
CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX),
CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX),
CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX),
@ -1027,7 +1028,9 @@ static struct omap_clk am33xx_clks[] = {
CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX),
CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX),
CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX),
CLK("481cc000.d_can", NULL, &dcan0_fck, CK_AM33XX),
CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX),
CLK("481d0000.d_can", NULL, &dcan1_fck, CK_AM33XX),
CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX),
CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX),
CLK("davinci-mcasp.0", NULL, &mcasp0_fck, CK_AM33XX),

13
arch/arm/mach-omap2/clock3xxx.c
View File

@ -21,9 +21,9 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/hardware.h>
#include <plat/clock.h>
#include "soc.h"
#include "clock.h"
#include "clock3xxx.h"
#include "prm2xxx_3xxx.h"
@ -49,8 +49,7 @@ int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
* on DPLL4.
*/
if (omap_rev() == OMAP3430_REV_ES1_0) {
pr_err("clock: DPLL4 cannot change rate due to "
"silicon 'Limitation 2.5' on 3430ES1.\n");
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
@ -64,15 +63,15 @@ void __init omap3_clk_lock_dpll5(void)
dpll5_clk = clk_get(NULL, "dpll5_ck");
clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
clk_enable(dpll5_clk);
clk_prepare_enable(dpll5_clk);
/* Program dpll5_m2_clk divider for no division */
dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
clk_enable(dpll5_m2_clk);
clk_prepare_enable(dpll5_m2_clk);
clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
clk_disable(dpll5_m2_clk);
clk_disable(dpll5_clk);
clk_disable_unprepare(dpll5_m2_clk);
clk_disable_unprepare(dpll5_clk);
return;
}

40
arch/arm/mach-omap2/clock3xxx_data.c
View File

@ -21,9 +21,9 @@
#include <linux/list.h>
#include <linux/io.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock3xxx.h"
@ -3215,7 +3215,6 @@ static struct clk dummy_apb_pclk = {
* clkdev
*/
/* XXX At some point we should rename this file to clock3xxx_data.c */
static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "apb_pclk", &dummy_apb_pclk, CK_3XXX),
CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX),
@ -3226,6 +3225,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_3XXX),
CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_3XXX),
CLK("twl", "fck", &osc_sys_ck, CK_3XXX),
CLK(NULL, "sys_ck", &sys_ck, CK_3XXX),
CLK(NULL, "sys_altclk", &sys_altclk, CK_3XXX),
CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_3XXX),
@ -3242,11 +3242,13 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX),
CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_3XXX),
CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX),
CLK(NULL, "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
CLK(NULL, "dpll4_ck", &dpll4_ck, CK_3XXX),
CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_3XXX),
CLK(NULL, "omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX),
CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX),
CLK(NULL, "omap_96m_alwon_fck_3630", &omap_96m_alwon_fck_3630, CK_36XX),
CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_3XXX),
CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_3XXX),
CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_3XXX),
@ -3262,6 +3264,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX),
CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_3XXX),
CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX),
CLK(NULL, "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
@ -3271,6 +3274,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "dpll1_fck", &dpll1_fck, CK_3XXX),
CLK(NULL, "mpu_ck", &mpu_ck, CK_3XXX),
CLK(NULL, "arm_fck", &arm_fck, CK_3XXX),
CLK(NULL, "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
CLK(NULL, "dpll2_fck", &dpll2_fck, CK_34XX | CK_36XX),
CLK(NULL, "iva2_ck", &iva2_ck, CK_34XX | CK_36XX),
@ -3294,6 +3298,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("usbhs_tll", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX),
CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX),
@ -3314,6 +3319,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1),
CLK(NULL, "core_12m_fck", &core_12m_fck, CK_3XXX),
CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX),
CLK(NULL, "hdq_fck", &hdq_fck, CK_3XXX),
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1),
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2PLUS | CK_36XX),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1),
@ -3321,6 +3327,8 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_3XXX),
CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es1, CK_3430ES1),
CLK("musb-omap2430", "ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX),
CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es1, CK_3430ES1),
CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_3430es2, CK_3430ES2PLUS | CK_36XX),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_3XXX),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_3XXX),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX),
@ -3328,28 +3336,42 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX),
CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("usbhs_tll", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "mmchs3_ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX),
CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX),
CLK("omap-sham", "ick", &sha12_ick, CK_34XX | CK_36XX),
CLK(NULL, "des2_ick", &des2_ick, CK_34XX | CK_36XX),
CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_3XXX),
CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_3XXX),
CLK(NULL, "mmchs2_ick", &mmchs2_ick, CK_3XXX),
CLK(NULL, "mmchs1_ick", &mmchs1_ick, CK_3XXX),
CLK(NULL, "mspro_ick", &mspro_ick, CK_34XX | CK_36XX),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_3XXX),
CLK(NULL, "hdq_ick", &hdq_ick, CK_3XXX),
CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_3XXX),
CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_3XXX),
CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_3XXX),
CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_3XXX),
CLK(NULL, "mcspi4_ick", &mcspi4_ick, CK_3XXX),
CLK(NULL, "mcspi3_ick", &mcspi3_ick, CK_3XXX),
CLK(NULL, "mcspi2_ick", &mcspi2_ick, CK_3XXX),
CLK(NULL, "mcspi1_ick", &mcspi1_ick, CK_3XXX),
CLK("omap_i2c.3", "ick", &i2c3_ick, CK_3XXX),
CLK("omap_i2c.2", "ick", &i2c2_ick, CK_3XXX),
CLK("omap_i2c.1", "ick", &i2c1_ick, CK_3XXX),
CLK(NULL, "i2c3_ick", &i2c3_ick, CK_3XXX),
CLK(NULL, "i2c2_ick", &i2c2_ick, CK_3XXX),
CLK(NULL, "i2c1_ick", &i2c1_ick, CK_3XXX),
CLK(NULL, "uart2_ick", &uart2_ick, CK_3XXX),
CLK(NULL, "uart1_ick", &uart1_ick, CK_3XXX),
CLK(NULL, "gpt11_ick", &gpt11_ick, CK_3XXX),
CLK(NULL, "gpt10_ick", &gpt10_ick, CK_3XXX),
CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_3XXX),
CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_3XXX),
CLK(NULL, "mcbsp5_ick", &mcbsp5_ick, CK_3XXX),
CLK(NULL, "mcbsp1_ick", &mcbsp1_ick, CK_3XXX),
CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1),
CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX),
CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_3XXX),
@ -3368,7 +3390,9 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_3XXX),
CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_3XXX),
CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1),
CLK(NULL, "dss_ick", &dss_ick_3430es1, CK_3430ES1),
CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "dss_ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX),
CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX),
@ -3384,6 +3408,8 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX),
CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX),
CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX),
CLK("usbhs_tll", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX),
CLK("usbhs_tll", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX),
CLK(NULL, "init_60m_fclk", &dummy_ck, CK_3XXX),
CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX),
CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX),
@ -3393,6 +3419,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_34XX | CK_36XX),
CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2PLUS | CK_36XX),
CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX),
CLK(NULL, "wdt2_ick", &wdt2_ick, CK_3XXX),
CLK(NULL, "wdt1_ick", &wdt1_ick, CK_3XXX),
CLK(NULL, "gpio1_ick", &gpio1_ick, CK_3XXX),
CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
@ -3438,9 +3465,13 @@ static struct omap_clk omap3xxx_clks[] = {
CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_3XXX),
CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_3XXX),
CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_3XXX),
CLK(NULL, "mcbsp4_ick", &mcbsp2_ick, CK_3XXX),
CLK(NULL, "mcbsp3_ick", &mcbsp3_ick, CK_3XXX),
CLK(NULL, "mcbsp2_ick", &mcbsp4_ick, CK_3XXX),
CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_3XXX),
CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_3XXX),
CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_3XXX),
CLK(NULL, "emu_src_ck", &emu_src_ck, CK_3XXX),
CLK("etb", "emu_src_ck", &emu_src_ck, CK_3XXX),
CLK(NULL, "pclk_fck", &pclk_fck, CK_3XXX),
CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_3XXX),
@ -3456,8 +3487,12 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "ipss_ick", &ipss_ick, CK_AM35XX),
CLK(NULL, "rmii_ck", &rmii_ck, CK_AM35XX),
CLK(NULL, "pclk_ck", &pclk_ck, CK_AM35XX),
CLK(NULL, "emac_ick", &emac_ick, CK_AM35XX),
CLK(NULL, "emac_fck", &emac_fck, CK_AM35XX),
CLK("davinci_emac.0", NULL, &emac_ick, CK_AM35XX),
CLK("davinci_mdio.0", NULL, &emac_fck, CK_AM35XX),
CLK(NULL, "vpfe_ick", &emac_ick, CK_AM35XX),
CLK(NULL, "vpfe_fck", &emac_fck, CK_AM35XX),
CLK("vpfe-capture", "master", &vpfe_ick, CK_AM35XX),
CLK("vpfe-capture", "slave", &vpfe_fck, CK_AM35XX),
CLK(NULL, "hsotgusb_ick", &hsotgusb_ick_am35xx, CK_AM35XX),
@ -3466,6 +3501,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX),
CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX),
CLK(NULL, "cpufreq_ck", &dpll1_ck, CK_3XXX),
};

23
arch/arm/mach-omap2/clock44xx_data.c
View File

@ -28,9 +28,9 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/hardware.h>
#include <plat/clkdev_omap.h>
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock44xx.h"
@ -3156,6 +3156,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X),
CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X),
CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X),
CLK(NULL, "dss_fck", &dss_fck, CK_443X),
CLK("omapdss_dss", "ick", &dss_fck, CK_443X),
CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X),
CLK(NULL, "emif1_fck", &emif1_fck, CK_443X),
@ -3212,6 +3213,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X),
CLK(NULL, "ocp2scp_usb_phy_ick", &ocp2scp_usb_phy_ick, CK_443X),
CLK(NULL, "ocp_wp_noc_ick", &ocp_wp_noc_ick, CK_443X),
CLK(NULL, "rng_ick", &rng_ick, CK_443X),
CLK("omap_rng", "ick", &rng_ick, CK_443X),
CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X),
CLK(NULL, "sl2if_ick", &sl2if_ick, CK_443X),
@ -3243,6 +3245,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "uart3_fck", &uart3_fck, CK_443X),
CLK(NULL, "uart4_fck", &uart4_fck, CK_443X),
CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X),
CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X),
CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X),
CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X),
CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X),
@ -3253,15 +3256,19 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X),
CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X),
CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X),
CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X),
CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X),
CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X),
CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X),
CLK(NULL, "usb_otg_hs_ick", &usb_otg_hs_ick, CK_443X),
CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X),
CLK(NULL, "usb_phy_cm_clk32k", &usb_phy_cm_clk32k, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X),
CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X),
CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X),
CLK("usbhs_tll", "usbtll_ick", &usb_tll_hs_ick, CK_443X),
CLK(NULL, "usim_ck", &usim_ck, CK_443X),
CLK(NULL, "usim_fclk", &usim_fclk, CK_443X),
CLK(NULL, "usim_fck", &usim_fck, CK_443X),
@ -3312,8 +3319,10 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "uart4_ick", &dummy_ck, CK_443X),
CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X),
CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X),
CLK("usbhs_tll", "usbtll_fck", &dummy_ck, CK_443X),
CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
CLK(NULL, "timer_32k_ck", &sys_32k_ck, CK_443X),
/* TODO: Remove "omap_timer.X" aliases once DT migration is complete */
CLK("omap_timer.1", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("omap_timer.2", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("omap_timer.3", "timer_sys_ck", &sys_clkin_ck, CK_443X),
@ -3325,6 +3334,18 @@ static struct omap_clk omap44xx_clks[] = {
CLK("omap_timer.6", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("omap_timer.7", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("omap_timer.8", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4a318000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("48032000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("48034000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("48036000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("49038000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4903a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4903c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4903e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X),
};
int __init omap4xxx_clk_init(void)

91
arch/arm/mach-omap2/clockdomain.c
View File

@ -174,9 +174,8 @@ void _clkdm_add_autodeps(struct clockdomain *clkdm)
if (IS_ERR(autodep->clkdm.ptr))
continue;
pr_debug("clockdomain: adding %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
pr_debug("clockdomain: %s: adding %s sleepdep/wkdep\n",
clkdm->name, autodep->clkdm.ptr->name);
clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
@ -205,9 +204,8 @@ void _clkdm_del_autodeps(struct clockdomain *clkdm)
if (IS_ERR(autodep->clkdm.ptr))
continue;
pr_debug("clockdomain: removing %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
pr_debug("clockdomain: %s: removing %s sleepdep/wkdep\n",
clkdm->name, autodep->clkdm.ptr->name);
clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
@ -469,14 +467,14 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear wake up of "
"%s when %s wakes up\n", clkdm1->name, clkdm2->name);
pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
pr_debug("clockdomain: hardware will wake up %s when %s wakes "
"up\n", clkdm1->name, clkdm2->name);
pr_debug("clockdomain: hardware will wake up %s when %s wakes up\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2);
}
@ -510,14 +508,14 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear wake up of "
"%s when %s wakes up\n", clkdm1->name, clkdm2->name);
pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
pr_debug("clockdomain: hardware will no longer wake up %s "
"after %s wakes up\n", clkdm1->name, clkdm2->name);
pr_debug("clockdomain: hardware will no longer wake up %s after %s wakes up\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2);
}
@ -555,8 +553,8 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear wake up of "
"%s when %s wakes up\n", clkdm1->name, clkdm2->name);
pr_debug("clockdomain: hardware cannot set/clear wake up of %s when %s wakes up\n",
clkdm1->name, clkdm2->name);
return ret;
}
@ -613,15 +611,14 @@ int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear sleep "
"dependency affecting %s from %s\n", clkdm1->name,
clkdm2->name);
pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
pr_debug("clockdomain: will prevent %s from sleeping if %s "
"is active\n", clkdm1->name, clkdm2->name);
pr_debug("clockdomain: will prevent %s from sleeping if %s is active\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2);
}
@ -657,16 +654,14 @@ int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear sleep "
"dependency affecting %s from %s\n", clkdm1->name,
clkdm2->name);
pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
clkdm1->name, clkdm2->name);
return ret;
}
if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
pr_debug("clockdomain: will no longer prevent %s from "
"sleeping if %s is active\n", clkdm1->name,
clkdm2->name);
pr_debug("clockdomain: will no longer prevent %s from sleeping if %s is active\n",
clkdm1->name, clkdm2->name);
ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2);
}
@ -706,9 +701,8 @@ int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
ret = -EINVAL;
if (ret) {
pr_debug("clockdomain: hardware cannot set/clear sleep "
"dependency affecting %s from %s\n", clkdm1->name,
clkdm2->name);
pr_debug("clockdomain: hardware cannot set/clear sleep dependency affecting %s from %s\n",
clkdm1->name, clkdm2->name);
return ret;
}
@ -755,8 +749,8 @@ int clkdm_sleep(struct clockdomain *clkdm)
return -EINVAL;
if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
pr_debug("clockdomain: %s does not support forcing "
"sleep via software\n", clkdm->name);
pr_debug("clockdomain: %s does not support forcing sleep via software\n",
clkdm->name);
return -EINVAL;
}
@ -790,8 +784,8 @@ int clkdm_wakeup(struct clockdomain *clkdm)
return -EINVAL;
if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
pr_debug("clockdomain: %s does not support forcing "
"wakeup via software\n", clkdm->name);
pr_debug("clockdomain: %s does not support forcing wakeup via software\n",
clkdm->name);
return -EINVAL;
}
@ -826,8 +820,8 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
return;
if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
pr_debug("clock: automatic idle transitions cannot be enabled "
"on clockdomain %s\n", clkdm->name);
pr_debug("clock: %s: automatic idle transitions cannot be enabled\n",
clkdm->name);
return;
}
@ -861,8 +855,8 @@ void clkdm_deny_idle(struct clockdomain *clkdm)
return;
if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
pr_debug("clockdomain: automatic idle transitions cannot be "
"disabled on %s\n", clkdm->name);
pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n",
clkdm->name);
return;
}
@ -905,6 +899,23 @@ bool clkdm_in_hwsup(struct clockdomain *clkdm)
return ret;
}
/**
* clkdm_missing_idle_reporting - can @clkdm enter autoidle even if in use?
* @clkdm: struct clockdomain *
*
* Returns true if clockdomain @clkdm has the
* CLKDM_MISSING_IDLE_REPORTING flag set, or false if not or @clkdm is
* null. More information is available in the documentation for the
* CLKDM_MISSING_IDLE_REPORTING macro.
*/
bool clkdm_missing_idle_reporting(struct clockdomain *clkdm)
{
if (!clkdm)
return false;
return (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) ? true : false;
}
/* Clockdomain-to-clock/hwmod framework interface code */
static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
@ -927,7 +938,7 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
pr_debug("clockdomain: %s: enabled\n", clkdm->name);
return 0;
}
@ -952,7 +963,7 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);
pr_debug("clockdomain: %s: disabled\n", clkdm->name);
return 0;
}

20
arch/arm/mach-omap2/clockdomain.h
View File

@ -1,9 +1,7 @@
/*
* arch/arm/plat-omap/include/mach/clockdomain.h
*
* OMAP2/3 clockdomain framework functions
*
* Copyright (C) 2008 Texas Instruments, Inc.
* Copyright (C) 2008, 2012 Texas Instruments, Inc.
* Copyright (C) 2008-2011 Nokia Corporation
*
* Paul Walmsley
@ -34,6 +32,20 @@
* CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
* active whenever the MPU is active. True for interconnects and
* the WKUP clockdomains.
* CLKDM_MISSING_IDLE_REPORTING: The idle status of the IP blocks and
* clocks inside this clockdomain are not taken into account by
* the PRCM when determining whether the clockdomain is idle.
* Without this flag, if the clockdomain is set to
* hardware-supervised idle mode, the PRCM may transition the
* enclosing powerdomain to a low power state, even when devices
* inside the clockdomain and powerdomain are in use. (An example
* of such a clockdomain is the EMU clockdomain on OMAP3/4.) If
* this flag is set, and the clockdomain does not support the
* force-sleep mode, then the HW_AUTO mode will be used to put the
* clockdomain to sleep. Similarly, if the clockdomain supports
* the force-wakeup mode, then it will be used whenever a clock or
* IP block inside the clockdomain is active, rather than the
* HW_AUTO mode.
*/
#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
@ -41,6 +53,7 @@
#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
#define CLKDM_NO_AUTODEPS (1 << 4)
#define CLKDM_ACTIVE_WITH_MPU (1 << 5)
#define CLKDM_MISSING_IDLE_REPORTING (1 << 6)
#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
@ -187,6 +200,7 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
void clkdm_allow_idle(struct clockdomain *clkdm);
void clkdm_deny_idle(struct clockdomain *clkdm);
bool clkdm_in_hwsup(struct clockdomain *clkdm);
bool clkdm_missing_idle_reporting(struct clockdomain *clkdm);
int clkdm_wakeup(struct clockdomain *clkdm);
int clkdm_sleep(struct clockdomain *clkdm);

49
arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
View File

@ -162,6 +162,19 @@ static void _disable_hwsup(struct clockdomain *clkdm)
clkdm->clktrctrl_mask);
}
static int omap3_clkdm_sleep(struct clockdomain *clkdm)
{
omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
{
omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
{
@ -170,6 +183,17 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
if (!clkdm->clktrctrl_mask)
return 0;
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
_enable_hwsup(clkdm);
return 0;
}
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
@ -193,6 +217,17 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
if (!clkdm->clktrctrl_mask)
return 0;
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
omap3_clkdm_wakeup(clkdm);
return 0;
}
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
@ -209,20 +244,6 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
return 0;
}
static int omap3_clkdm_sleep(struct clockdomain *clkdm)
{
omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
{
omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
{
if (atomic_read(&clkdm->usecount) > 0)

11
arch/arm/mach-omap2/clockdomain44xx.c
View File

@ -113,6 +113,17 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
if (!clkdm->prcm_partition)
return 0;
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
omap4_clkdm_allow_idle(clkdm);
return 0;
}
hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);

7
arch/arm/mach-omap2/clockdomains3xxx_data.c
View File

@ -387,14 +387,11 @@ static struct clockdomain per_am35x_clkdm = {
.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
};
/*
* Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
* switched of even if sdti is in use
*/
static struct clockdomain emu_clkdm = {
.name = "emu_clkdm",
.pwrdm = { .name = "emu_pwrdm" },
.flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
.flags = (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP |
CLKDM_MISSING_IDLE_REPORTING),
.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
};

3
arch/arm/mach-omap2/clockdomains44xx_data.c
View File

@ -390,7 +390,8 @@ static struct clockdomain emu_sys_44xx_clkdm = {
.prcm_partition = OMAP4430_PRM_PARTITION,
.cm_inst = OMAP4430_PRM_EMU_CM_INST,
.clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
.flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP,
.flags = (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP |
CLKDM_MISSING_IDLE_REPORTING),
};
static struct clockdomain l3_dma_44xx_clkdm = {

158
arch/arm/mach-omap2/cm-regbits-33xx.h
View File

@ -25,263 +25,328 @@
* CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER
*/
#define AM33XX_AUTO_DPLL_MODE_SHIFT 0
#define AM33XX_AUTO_DPLL_MODE_WIDTH 3
#define AM33XX_AUTO_DPLL_MODE_MASK (0x7 << 0)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_ADC_FCLK_SHIFT 14
#define AM33XX_CLKACTIVITY_ADC_FCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_ADC_FCLK_MASK (1 << 16)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CAN_CLK_SHIFT 11
#define AM33XX_CLKACTIVITY_CAN_CLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CAN_CLK_MASK (1 << 11)
/* Used by CM_PER_CLK_24MHZ_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_SHIFT 4
#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CLK_24MHZ_GCLK_MASK (1 << 4)
/* Used by CM_PER_CPSW_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_SHIFT 4
#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CPSW_125MHZ_GCLK_MASK (1 << 4)
/* Used by CM_PER_L4HS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_SHIFT 4
#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CPSW_250MHZ_GCLK_MASK (1 << 4)
/* Used by CM_PER_L4HS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_SHIFT 5
#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CPSW_50MHZ_GCLK_MASK (1 << 5)
/* Used by CM_PER_L4HS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_SHIFT 6
#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CPSW_5MHZ_GCLK_MASK (1 << 6)
/* Used by CM_PER_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_SHIFT 6
#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CPTS_RFT_GCLK_MASK (1 << 6)
/* Used by CM_CEFUSE_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9
#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_WIDTH 1
#define AM33XX_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9)
/* Used by CM_L3_AON_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_DBGSYSCLK_SHIFT 2
#define AM33XX_CLKACTIVITY_DBGSYSCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_DBGSYSCLK_MASK (1 << 2)
/* Used by CM_L3_AON_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_DEBUG_CLKA_SHIFT 4
#define AM33XX_CLKACTIVITY_DEBUG_CLKA_WIDTH 1
#define AM33XX_CLKACTIVITY_DEBUG_CLKA_MASK (1 << 4)
/* Used by CM_PER_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_EMIF_GCLK_SHIFT 2
#define AM33XX_CLKACTIVITY_EMIF_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_EMIF_GCLK_MASK (1 << 2)
/* Used by CM_GFX_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GFX_FCLK_SHIFT 9
#define AM33XX_CLKACTIVITY_GFX_FCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GFX_FCLK_MASK (1 << 9)
/* Used by CM_GFX_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_SHIFT 8
#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GFX_L3_GCLK_MASK (1 << 8)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_SHIFT 8
#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO0_GDBCLK_MASK (1 << 8)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_SHIFT 19
#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_1_GDBCLK_MASK (1 << 19)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_SHIFT 20
#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_2_GDBCLK_MASK (1 << 20)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_SHIFT 21
#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_3_GDBCLK_MASK (1 << 21)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_SHIFT 22
#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_4_GDBCLK_MASK (1 << 22)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_SHIFT 26
#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_5_GDBCLK_MASK (1 << 26)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_SHIFT 18
#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_GPIO_6_GDBCLK_MASK (1 << 18)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_I2C0_GFCLK_SHIFT 11
#define AM33XX_CLKACTIVITY_I2C0_GFCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_I2C0_GFCLK_MASK (1 << 11)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_I2C_FCLK_SHIFT 24
#define AM33XX_CLKACTIVITY_I2C_FCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_I2C_FCLK_MASK (1 << 24)
/* Used by CM_PER_PRUSS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_SHIFT 5
#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_PRUSS_IEP_GCLK_MASK (1 << 5)
/* Used by CM_PER_PRUSS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_SHIFT 4
#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_PRUSS_OCP_GCLK_MASK (1 << 4)
/* Used by CM_PER_PRUSS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_SHIFT 6
#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_PRUSS_UART_GCLK_MASK (1 << 6)
/* Used by CM_PER_L3S_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L3S_GCLK_SHIFT 3
#define AM33XX_CLKACTIVITY_L3S_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L3S_GCLK_MASK (1 << 3)
/* Used by CM_L3_AON_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L3_AON_GCLK_SHIFT 3
#define AM33XX_CLKACTIVITY_L3_AON_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L3_AON_GCLK_MASK (1 << 3)
/* Used by CM_PER_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L3_GCLK_SHIFT 4
#define AM33XX_CLKACTIVITY_L3_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L3_GCLK_MASK (1 << 4)
/* Used by CM_PER_L4FW_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4FW_GCLK_SHIFT 8
#define AM33XX_CLKACTIVITY_L4FW_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4FW_GCLK_MASK (1 << 8)
/* Used by CM_PER_L4HS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4HS_GCLK_SHIFT 3
#define AM33XX_CLKACTIVITY_L4HS_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4HS_GCLK_MASK (1 << 3)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4LS_GCLK_SHIFT 8
#define AM33XX_CLKACTIVITY_L4LS_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4LS_GCLK_MASK (1 << 8)
/* Used by CM_GFX_L4LS_GFX_CLKSTCTRL__1 */
#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_SHIFT 8
#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4LS_GFX_GCLK_MASK (1 << 8)
/* Used by CM_CEFUSE_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8
#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8)
/* Used by CM_RTC_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_SHIFT 8
#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4_RTC_GCLK_MASK (1 << 8)
/* Used by CM_L4_WKUP_AON_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_SHIFT 2
#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4_WKUP_AON_GCLK_MASK (1 << 2)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_SHIFT 2
#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_L4_WKUP_GCLK_MASK (1 << 2)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_LCDC_GCLK_SHIFT 17
#define AM33XX_CLKACTIVITY_LCDC_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_LCDC_GCLK_MASK (1 << 17)
/* Used by CM_PER_LCDC_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_SHIFT 4
#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_LCDC_L3_OCP_GCLK_MASK (1 << 4)
/* Used by CM_PER_LCDC_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_SHIFT 5
#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_LCDC_L4_OCP_GCLK_MASK (1 << 5)
/* Used by CM_PER_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_MCASP_GCLK_SHIFT 7
#define AM33XX_CLKACTIVITY_MCASP_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_MCASP_GCLK_MASK (1 << 7)
/* Used by CM_PER_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_MMC_FCLK_SHIFT 3
#define AM33XX_CLKACTIVITY_MMC_FCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_MMC_FCLK_MASK (1 << 3)
/* Used by CM_MPU_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_MPU_CLK_SHIFT 2
#define AM33XX_CLKACTIVITY_MPU_CLK_WIDTH 1
#define AM33XX_CLKACTIVITY_MPU_CLK_MASK (1 << 2)
/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_SHIFT 4
#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_OCPWP_L3_GCLK_MASK (1 << 4)
/* Used by CM_PER_OCPWP_L3_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_SHIFT 5
#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_OCPWP_L4_GCLK_MASK (1 << 5)
/* Used by CM_RTC_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_RTC_32KCLK_SHIFT 9
#define AM33XX_CLKACTIVITY_RTC_32KCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_RTC_32KCLK_MASK (1 << 9)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_SPI_GCLK_SHIFT 25
#define AM33XX_CLKACTIVITY_SPI_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_SPI_GCLK_MASK (1 << 25)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_SR_SYSCLK_SHIFT 3
#define AM33XX_CLKACTIVITY_SR_SYSCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_SR_SYSCLK_MASK (1 << 3)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER0_GCLK_SHIFT 10
#define AM33XX_CLKACTIVITY_TIMER0_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER0_GCLK_MASK (1 << 10)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER1_GCLK_SHIFT 13
#define AM33XX_CLKACTIVITY_TIMER1_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER1_GCLK_MASK (1 << 13)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER2_GCLK_SHIFT 14
#define AM33XX_CLKACTIVITY_TIMER2_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER2_GCLK_MASK (1 << 14)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER3_GCLK_SHIFT 15
#define AM33XX_CLKACTIVITY_TIMER3_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER3_GCLK_MASK (1 << 15)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER4_GCLK_SHIFT 16
#define AM33XX_CLKACTIVITY_TIMER4_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER4_GCLK_MASK (1 << 16)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER5_GCLK_SHIFT 27
#define AM33XX_CLKACTIVITY_TIMER5_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER5_GCLK_MASK (1 << 27)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER6_GCLK_SHIFT 28
#define AM33XX_CLKACTIVITY_TIMER6_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER6_GCLK_MASK (1 << 28)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_TIMER7_GCLK_SHIFT 13
#define AM33XX_CLKACTIVITY_TIMER7_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_TIMER7_GCLK_MASK (1 << 13)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_UART0_GFCLK_SHIFT 12
#define AM33XX_CLKACTIVITY_UART0_GFCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_UART0_GFCLK_MASK (1 << 12)
/* Used by CM_PER_L4LS_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_UART_GFCLK_SHIFT 10
#define AM33XX_CLKACTIVITY_UART_GFCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_UART_GFCLK_MASK (1 << 10)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_WDT0_GCLK_SHIFT 9
#define AM33XX_CLKACTIVITY_WDT0_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_WDT0_GCLK_MASK (1 << 9)
/* Used by CM_WKUP_CLKSTCTRL */
#define AM33XX_CLKACTIVITY_WDT1_GCLK_SHIFT 4
#define AM33XX_CLKACTIVITY_WDT1_GCLK_WIDTH 1
#define AM33XX_CLKACTIVITY_WDT1_GCLK_MASK (1 << 4)
/* Used by CLKSEL_GFX_FCLK */
#define AM33XX_CLKDIV_SEL_GFX_FCLK_SHIFT 0
#define AM33XX_CLKDIV_SEL_GFX_FCLK_WIDTH 1
#define AM33XX_CLKDIV_SEL_GFX_FCLK_MASK (1 << 0)
/* Used by CM_CLKOUT_CTRL */
#define AM33XX_CLKOUT2DIV_SHIFT 3
#define AM33XX_CLKOUT2DIV_MASK (0x05 << 3)
#define AM33XX_CLKOUT2DIV_WIDTH 3
#define AM33XX_CLKOUT2DIV_MASK (0x7 << 3)
/* Used by CM_CLKOUT_CTRL */
#define AM33XX_CLKOUT2EN_SHIFT 7
#define AM33XX_CLKOUT2EN_WIDTH 1
#define AM33XX_CLKOUT2EN_MASK (1 << 7)
/* Used by CM_CLKOUT_CTRL */
#define AM33XX_CLKOUT2SOURCE_SHIFT 0
#define AM33XX_CLKOUT2SOURCE_MASK (0x02 << 0)
#define AM33XX_CLKOUT2SOURCE_WIDTH 3
#define AM33XX_CLKOUT2SOURCE_MASK (0x7 << 0)
/*
* Used by CLKSEL_GPIO0_DBCLK, CLKSEL_LCDC_PIXEL_CLK, CLKSEL_TIMER2_CLK,
@ -289,6 +354,7 @@
* CLKSEL_TIMER7_CLK
*/
#define AM33XX_CLKSEL_SHIFT 0
#define AM33XX_CLKSEL_WIDTH 1
#define AM33XX_CLKSEL_MASK (0x01 << 0)
/*
@ -296,17 +362,21 @@
* CM_CPTS_RFT_CLKSEL
*/
#define AM33XX_CLKSEL_0_0_SHIFT 0
#define AM33XX_CLKSEL_0_0_WIDTH 1
#define AM33XX_CLKSEL_0_0_MASK (1 << 0)
#define AM33XX_CLKSEL_0_1_SHIFT 0
#define AM33XX_CLKSEL_0_1_WIDTH 2
#define AM33XX_CLKSEL_0_1_MASK (3 << 0)
/* Renamed from CLKSEL Used by CLKSEL_TIMER1MS_CLK */
#define AM33XX_CLKSEL_0_2_SHIFT 0
#define AM33XX_CLKSEL_0_2_WIDTH 3
#define AM33XX_CLKSEL_0_2_MASK (7 << 0)
/* Used by CLKSEL_GFX_FCLK */
#define AM33XX_CLKSEL_GFX_FCLK_SHIFT 1
#define AM33XX_CLKSEL_GFX_FCLK_WIDTH 1
#define AM33XX_CLKSEL_GFX_FCLK_MASK (1 << 1)
/*
@ -318,6 +388,7 @@
* CM_GFX_L3_CLKSTCTRL, CM_GFX_L4LS_GFX_CLKSTCTRL__1, CM_CEFUSE_CLKSTCTRL
*/
#define AM33XX_CLKTRCTRL_SHIFT 0
#define AM33XX_CLKTRCTRL_WIDTH 2
#define AM33XX_CLKTRCTRL_MASK (0x3 << 0)
/*
@ -326,34 +397,42 @@
* CM_SSC_DELTAMSTEP_DPLL_PER
*/
#define AM33XX_DELTAMSTEP_SHIFT 0
#define AM33XX_DELTAMSTEP_MASK (0x19 << 0)
#define AM33XX_DELTAMSTEP_WIDTH 20
#define AM33XX_DELTAMSTEP_MASK (0xfffff << 0)
/* Used by CM_CLKSEL_DPLL_DDR, CM_CLKSEL_DPLL_DISP, CM_CLKSEL_DPLL_MPU */
#define AM33XX_DPLL_BYP_CLKSEL_SHIFT 23
#define AM33XX_DPLL_BYP_CLKSEL_WIDTH 1
#define AM33XX_DPLL_BYP_CLKSEL_MASK (1 << 23)
/* Used by CM_CLKDCOLDO_DPLL_PER */
#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8
#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_WIDTH 1
#define AM33XX_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8)
/* Used by CM_CLKDCOLDO_DPLL_PER */
#define AM33XX_DPLL_CLKDCOLDO_PWDN_SHIFT 12
#define AM33XX_DPLL_CLKDCOLDO_PWDN_WIDTH 1
#define AM33XX_DPLL_CLKDCOLDO_PWDN_MASK (1 << 12)
/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
#define AM33XX_DPLL_CLKOUT_DIV_SHIFT 0
#define AM33XX_DPLL_CLKOUT_DIV_WIDTH 5
#define AM33XX_DPLL_CLKOUT_DIV_MASK (0x1f << 0)
/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_PER */
#define AM33XX_DPLL_CLKOUT_DIV_0_6_SHIFT 0
#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x06 << 0)
#define AM33XX_DPLL_CLKOUT_DIV_0_6_WIDTH 7
#define AM33XX_DPLL_CLKOUT_DIV_0_6_MASK (0x7f << 0)
/* Used by CM_DIV_M2_DPLL_DDR, CM_DIV_M2_DPLL_DISP, CM_DIV_M2_DPLL_MPU */
#define AM33XX_DPLL_CLKOUT_DIVCHACK_SHIFT 5
#define AM33XX_DPLL_CLKOUT_DIVCHACK_WIDTH 1
#define AM33XX_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5)
/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_PER */
#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_SHIFT 7
#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_WIDTH 1
#define AM33XX_DPLL_CLKOUT_DIVCHACK_M2_PER_MASK (1 << 7)
/*
@ -361,6 +440,7 @@
* CM_DIV_M2_DPLL_PER
*/
#define AM33XX_DPLL_CLKOUT_GATE_CTRL_SHIFT 8
#define AM33XX_DPLL_CLKOUT_GATE_CTRL_WIDTH 1
#define AM33XX_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
/*
@ -368,19 +448,22 @@
* CM_CLKSEL_DPLL_MPU
*/
#define AM33XX_DPLL_DIV_SHIFT 0
#define AM33XX_DPLL_DIV_WIDTH 7
#define AM33XX_DPLL_DIV_MASK (0x7f << 0)
#define AM33XX_DPLL_PER_DIV_MASK (0xff << 0)
/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_PERIPH */
#define AM33XX_DPLL_DIV_0_7_SHIFT 0
#define AM33XX_DPLL_DIV_0_7_MASK (0x07 << 0)
#define AM33XX_DPLL_DIV_0_7_WIDTH 8
#define AM33XX_DPLL_DIV_0_7_MASK (0xff << 0)
/*
* Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
* CM_CLKMODE_DPLL_MPU
*/
#define AM33XX_DPLL_DRIFTGUARD_EN_SHIFT 8
#define AM33XX_DPLL_DRIFTGUARD_EN_WIDTH 1
#define AM33XX_DPLL_DRIFTGUARD_EN_MASK (1 << 8)
/*
@ -388,6 +471,7 @@
* CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
*/
#define AM33XX_DPLL_EN_SHIFT 0
#define AM33XX_DPLL_EN_WIDTH 3
#define AM33XX_DPLL_EN_MASK (0x7 << 0)
/*
@ -395,6 +479,7 @@
* CM_CLKMODE_DPLL_MPU
*/
#define AM33XX_DPLL_LPMODE_EN_SHIFT 10
#define AM33XX_DPLL_LPMODE_EN_WIDTH 1
#define AM33XX_DPLL_LPMODE_EN_MASK (1 << 10)
/*
@ -402,10 +487,12 @@
* CM_CLKSEL_DPLL_MPU
*/
#define AM33XX_DPLL_MULT_SHIFT 8
#define AM33XX_DPLL_MULT_WIDTH 11
#define AM33XX_DPLL_MULT_MASK (0x7ff << 8)
/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_PERIPH */
#define AM33XX_DPLL_MULT_PERIPH_SHIFT 8
#define AM33XX_DPLL_MULT_PERIPH_WIDTH 12
#define AM33XX_DPLL_MULT_PERIPH_MASK (0xfff << 8)
/*
@ -413,17 +500,20 @@
* CM_CLKMODE_DPLL_MPU
*/
#define AM33XX_DPLL_REGM4XEN_SHIFT 11
#define AM33XX_DPLL_REGM4XEN_WIDTH 1
#define AM33XX_DPLL_REGM4XEN_MASK (1 << 11)
/* Used by CM_CLKSEL_DPLL_PERIPH */
#define AM33XX_DPLL_SD_DIV_SHIFT 24
#define AM33XX_DPLL_SD_DIV_MASK (24, 31)
#define AM33XX_DPLL_SD_DIV_WIDTH 8
#define AM33XX_DPLL_SD_DIV_MASK (0xff << 24)
/*
* Used by CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDR, CM_CLKMODE_DPLL_DISP,
* CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
*/
#define AM33XX_DPLL_SSC_ACK_SHIFT 13
#define AM33XX_DPLL_SSC_ACK_WIDTH 1
#define AM33XX_DPLL_SSC_ACK_MASK (1 << 13)
/*
@ -431,6 +521,7 @@
* CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
*/
#define AM33XX_DPLL_SSC_DOWNSPREAD_SHIFT 14
#define AM33XX_DPLL_SSC_DOWNSPREAD_WIDTH 1
#define AM33XX_DPLL_SSC_DOWNSPREAD_MASK (1 << 14)
/*
@ -438,54 +529,67 @@
* CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
*/
#define AM33XX_DPLL_SSC_EN_SHIFT 12
#define AM33XX_DPLL_SSC_EN_WIDTH 1
#define AM33XX_DPLL_SSC_EN_MASK (1 << 12)
/* Used by CM_DIV_M4_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT 0
#define AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH 5
#define AM33XX_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0)
/* Used by CM_DIV_M4_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5
#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5)
/* Used by CM_DIV_M4_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8
#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8)
/* Used by CM_DIV_M4_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12
#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12)
/* Used by CM_DIV_M5_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT 0
#define AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH 5
#define AM33XX_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0)
/* Used by CM_DIV_M5_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5
#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5)
/* Used by CM_DIV_M5_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8
#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8)
/* Used by CM_DIV_M5_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12
#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12)
/* Used by CM_DIV_M6_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT 0
#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x04 << 0)
#define AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH 5
#define AM33XX_HSDIVIDER_CLKOUT3_DIV_MASK (0x1f << 0)
/* Used by CM_DIV_M6_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5
#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5)
/* Used by CM_DIV_M6_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8
#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8)
/* Used by CM_DIV_M6_DPLL_CORE */
#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12
#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_WIDTH 1
#define AM33XX_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12)
/*
@ -522,11 +626,12 @@
* CM_GFX_MMUCFG_CLKCTRL, CM_GFX_MMUDATA_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL
*/
#define AM33XX_IDLEST_SHIFT 16
#define AM33XX_IDLEST_WIDTH 2
#define AM33XX_IDLEST_MASK (0x3 << 16)
#define AM33XX_IDLEST_VAL 0x3
/* Used by CM_MAC_CLKSEL */
#define AM33XX_MII_CLK_SEL_SHIFT 2
#define AM33XX_MII_CLK_SEL_WIDTH 1
#define AM33XX_MII_CLK_SEL_MASK (1 << 2)
/*
@ -535,7 +640,8 @@
* CM_SSC_MODFREQDIV_DPLL_PER
*/
#define AM33XX_MODFREQDIV_EXPONENT_SHIFT 8
#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x10 << 8)
#define AM33XX_MODFREQDIV_EXPONENT_WIDTH 3
#define AM33XX_MODFREQDIV_EXPONENT_MASK (0x7 << 8)
/*
* Used by CM_SSC_MODFREQDIV_DPLL_CORE, CM_SSC_MODFREQDIV_DPLL_DDR,
@ -543,7 +649,8 @@
* CM_SSC_MODFREQDIV_DPLL_PER
*/
#define AM33XX_MODFREQDIV_MANTISSA_SHIFT 0
#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x06 << 0)
#define AM33XX_MODFREQDIV_MANTISSA_WIDTH 7
#define AM33XX_MODFREQDIV_MANTISSA_MASK (0x7f << 0)
/*
* Used by CM_MPU_MPU_CLKCTRL, CM_RTC_RTC_CLKCTRL, CM_PER_AES0_CLKCTRL,
@ -580,42 +687,52 @@
* CM_CEFUSE_CEFUSE_CLKCTRL
*/
#define AM33XX_MODULEMODE_SHIFT 0
#define AM33XX_MODULEMODE_WIDTH 2
#define AM33XX_MODULEMODE_MASK (0x3 << 0)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_OPTCLK_DEBUG_CLKA_SHIFT 30
#define AM33XX_OPTCLK_DEBUG_CLKA_WIDTH 1
#define AM33XX_OPTCLK_DEBUG_CLKA_MASK (1 << 30)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT 19
#define AM33XX_OPTFCLKEN_DBGSYSCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_DBGSYSCLK_MASK (1 << 19)
/* Used by CM_WKUP_GPIO0_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT 18
#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO0_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO1_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT 18
#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO2_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT 18
#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO3_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT 18
#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO4_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_SHIFT 18
#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_4_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO5_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_SHIFT 18
#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_5_GDBCLK_MASK (1 << 18)
/* Used by CM_PER_GPIO6_CLKCTRL */
#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_SHIFT 18
#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_WIDTH 1
#define AM33XX_OPTFCLKEN_GPIO_6_GDBCLK_MASK (1 << 18)
/*
@ -627,25 +744,30 @@
* CM_WKUP_WKUP_M3_CLKCTRL, CM_GFX_BITBLT_CLKCTRL, CM_GFX_GFX_CLKCTRL
*/
#define AM33XX_STBYST_SHIFT 18
#define AM33XX_STBYST_WIDTH 1
#define AM33XX_STBYST_MASK (1 << 18)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_STM_PMD_CLKDIVSEL_SHIFT 27
#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x29 << 27)
#define AM33XX_STM_PMD_CLKDIVSEL_WIDTH 3
#define AM33XX_STM_PMD_CLKDIVSEL_MASK (0x7 << 27)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_STM_PMD_CLKSEL_SHIFT 22
#define AM33XX_STM_PMD_CLKSEL_MASK (0x23 << 22)
#define AM33XX_STM_PMD_CLKSEL_WIDTH 2
#define AM33XX_STM_PMD_CLKSEL_MASK (0x3 << 22)
/*
* Used by CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDR, CM_IDLEST_DPLL_DISP,
* CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
*/
#define AM33XX_ST_DPLL_CLK_SHIFT 0
#define AM33XX_ST_DPLL_CLK_WIDTH 1
#define AM33XX_ST_DPLL_CLK_MASK (1 << 0)
/* Used by CM_CLKDCOLDO_DPLL_PER */
#define AM33XX_ST_DPLL_CLKDCOLDO_SHIFT 8
#define AM33XX_ST_DPLL_CLKDCOLDO_WIDTH 1
#define AM33XX_ST_DPLL_CLKDCOLDO_MASK (1 << 8)
/*
@ -653,18 +775,22 @@
* CM_DIV_M2_DPLL_PER
*/
#define AM33XX_ST_DPLL_CLKOUT_SHIFT 9
#define AM33XX_ST_DPLL_CLKOUT_WIDTH 1
#define AM33XX_ST_DPLL_CLKOUT_MASK (1 << 9)
/* Used by CM_DIV_M4_DPLL_CORE */
#define AM33XX_ST_HSDIVIDER_CLKOUT1_SHIFT 9
#define AM33XX_ST_HSDIVIDER_CLKOUT1_WIDTH 1
#define AM33XX_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9)
/* Used by CM_DIV_M5_DPLL_CORE */
#define AM33XX_ST_HSDIVIDER_CLKOUT2_SHIFT 9
#define AM33XX_ST_HSDIVIDER_CLKOUT2_WIDTH 1
#define AM33XX_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9)
/* Used by CM_DIV_M6_DPLL_CORE */
#define AM33XX_ST_HSDIVIDER_CLKOUT3_SHIFT 9
#define AM33XX_ST_HSDIVIDER_CLKOUT3_WIDTH 1
#define AM33XX_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9)
/*
@ -672,16 +798,20 @@
* CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER
*/
#define AM33XX_ST_MN_BYPASS_SHIFT 8
#define AM33XX_ST_MN_BYPASS_WIDTH 1
#define AM33XX_ST_MN_BYPASS_MASK (1 << 8)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_TRC_PMD_CLKDIVSEL_SHIFT 24
#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x26 << 24)
#define AM33XX_TRC_PMD_CLKDIVSEL_WIDTH 3
#define AM33XX_TRC_PMD_CLKDIVSEL_MASK (0x7 << 24)
/* Used by CM_WKUP_DEBUGSS_CLKCTRL */
#define AM33XX_TRC_PMD_CLKSEL_SHIFT 20
#define AM33XX_TRC_PMD_CLKSEL_MASK (0x21 << 20)
#define AM33XX_TRC_PMD_CLKSEL_WIDTH 2
#define AM33XX_TRC_PMD_CLKSEL_MASK (0x3 << 20)
/* Used by CONTROL_SEC_CLK_CTRL */
#define AM33XX_TIMER0_CLKSEL_WIDTH 2
#define AM33XX_TIMER0_CLKSEL_MASK (0x3 << 4)
#endif

2
arch/arm/mach-omap2/cm-regbits-34xx.h
View File

@ -218,6 +218,8 @@
#define OMAP3430_ST_MAILBOXES_MASK (1 << 7)
#define OMAP3430_ST_OMAPCTRL_SHIFT 6
#define OMAP3430_ST_OMAPCTRL_MASK (1 << 6)
#define OMAP3430_ST_SAD2D_SHIFT 3
#define OMAP3430_ST_SAD2D_MASK (1 << 3)
#define OMAP3430_ST_SDMA_SHIFT 2
#define OMAP3430_ST_SDMA_MASK (1 << 2)
#define OMAP3430_ST_SDRC_SHIFT 1

411
arch/arm/mach-omap2/cm-regbits-44xx.h
View File

File diff suppressed because it is too large Load Diff

5
arch/arm/mach-omap2/cm2xxx_3xxx.c
View File

@ -18,8 +18,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <plat/hardware.h>
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "cm.h"
@ -36,7 +35,7 @@
#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
static const u8 cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
};
u32 omap2_cm_read_mod_reg(s16 module, u16 idx)

1
arch/arm/mach-omap2/cm2xxx_3xxx.h
View File

@ -71,6 +71,7 @@
#define OMAP24XX_CM_FCLKEN2 0x0004
#define OMAP24XX_CM_ICLKEN4 0x001c
#define OMAP24XX_CM_AUTOIDLE4 0x003c
#define OMAP24XX_CM_IDLEST4 0x002c
#define OMAP2430_CM_IDLEST3 0x0028

4
arch/arm/mach-omap2/common-board-devices.c
View File

@ -27,6 +27,7 @@
#include <plat/mcspi.h>
#include <plat/nand.h>
#include "common.h"
#include "common-board-devices.h"
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
@ -119,8 +120,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
}
if (nandcs > GPMC_CS_NUM) {
printk(KERN_INFO "NAND: Unable to find configuration "
"in GPMC\n ");
pr_info("NAND: Unable to find configuration in GPMC\n");
return;
}

Some files were not shown because too many files have changed in this diff Show More