Merge branches 'aaci', 'mmci-dma', 'pl' and 'pl011' into drivers

This commit is contained in:
Russell King 2011-03-17 11:04:51 +00:00
commit 9c9585e0e9
1461 changed files with 19579 additions and 10911 deletions

1
.gitignore vendored
View File

@ -28,6 +28,7 @@ modules.builtin
*.gz
*.bz2
*.lzma
*.xz
*.lzo
*.patch
*.gcno

View File

@ -23,6 +23,7 @@ Andy Adamson <andros@citi.umich.edu>
Arnaud Patard <arnaud.patard@rtp-net.org>
Arnd Bergmann <arnd@arndb.de>
Axel Dyks <xl@xlsigned.net>
Axel Lin <axel.lin@gmail.com>
Ben Gardner <bgardner@wabtec.com>
Ben M Cahill <ben.m.cahill@intel.com>
Björn Steinbrink <B.Steinbrink@gmx.de>

View File

@ -0,0 +1,25 @@
What: /sys/devices/platform/at91_can/net/<iface>/mb0_id
Date: January 2011
KernelVersion: 2.6.38
Contact: Marc Kleine-Budde <kernel@pengutronix.de>
Description:
Value representing the can_id of mailbox 0.
Default: 0x7ff (standard frame)
Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the
contents of mailbox 0 may be send under certain
conditions (even if disabled or in rx mode).
The workaround in the errata suggests not to use the
mailbox and load it with an unused identifier.
In order to use an extended can_id add the
CAN_EFF_FLAG (0x80000000U) to the can_id. Example:
- standard id 0x7ff:
echo 0x7ff > /sys/class/net/can0/mb0_id
- extended id 0x1fffffff:
echo 0x9fffffff > /sys/class/net/can0/mb0_id

View File

@ -217,8 +217,8 @@ X!Isound/sound_firmware.c
<chapter id="uart16x50">
<title>16x50 UART Driver</title>
!Iinclude/linux/serial_core.h
!Edrivers/serial/serial_core.c
!Edrivers/serial/8250.c
!Edrivers/tty/serial/serial_core.c
!Edrivers/tty/serial/8250.c
</chapter>
<chapter id="fbdev">

View File

@ -73,8 +73,8 @@
services.
</para>
<para>
The core of every DRM driver is struct drm_device. Drivers
will typically statically initialize a drm_device structure,
The core of every DRM driver is struct drm_driver. Drivers
will typically statically initialize a drm_driver structure,
then pass it to drm_init() at load time.
</para>
@ -84,7 +84,7 @@
<title>Driver initialization</title>
<para>
Before calling the DRM initialization routines, the driver must
first create and fill out a struct drm_device structure.
first create and fill out a struct drm_driver structure.
</para>
<programlisting>
static struct drm_driver driver = {

View File

@ -82,6 +82,11 @@
</sect1>
</chapter>
<chapter id="fs_events">
<title>Events based on file descriptors</title>
!Efs/eventfd.c
</chapter>
<chapter id="sysfs">
<title>The Filesystem for Exporting Kernel Objects</title>
!Efs/sysfs/file.c

View File

@ -13,7 +13,6 @@ Table of Contents
I - Introduction
1) Entry point for arch/powerpc
2) Board support
II - The DT block format
1) Header
@ -41,13 +40,6 @@ Table of Contents
VI - System-on-a-chip devices and nodes
1) Defining child nodes of an SOC
2) Representing devices without a current OF specification
a) PHY nodes
b) Interrupt controllers
c) 4xx/Axon EMAC ethernet nodes
d) Xilinx IP cores
e) USB EHCI controllers
f) MDIO on GPIOs
g) SPI busses
VII - Specifying interrupt information for devices
1) interrupts property
@ -123,7 +115,7 @@ Revision Information
I - Introduction
================
During the recent development of the Linux/ppc64 kernel, and more
During the development of the Linux/ppc64 kernel, and more
specifically, the addition of new platform types outside of the old
IBM pSeries/iSeries pair, it was decided to enforce some strict rules
regarding the kernel entry and bootloader <-> kernel interfaces, in
@ -146,7 +138,7 @@ section III, but, for example, the kernel does not require you to
create a node for every PCI device in the system. It is a requirement
to have a node for PCI host bridges in order to provide interrupt
routing informations and memory/IO ranges, among others. It is also
recommended to define nodes for on chip devices and other busses that
recommended to define nodes for on chip devices and other buses that
don't specifically fit in an existing OF specification. This creates a
great flexibility in the way the kernel can then probe those and match
drivers to device, without having to hard code all sorts of tables. It
@ -158,7 +150,7 @@ it with special cases.
1) Entry point for arch/powerpc
-------------------------------
There is one and one single entry point to the kernel, at the start
There is one single entry point to the kernel, at the start
of the kernel image. That entry point supports two calling
conventions:
@ -210,12 +202,6 @@ it with special cases.
with all CPUs. The way to do that with method b) will be
described in a later revision of this document.
2) Board support
----------------
64-bit kernels:
Board supports (platforms) are not exclusive config options. An
arbitrary set of board supports can be built in a single kernel
image. The kernel will "know" what set of functions to use for a
@ -234,48 +220,11 @@ it with special cases.
containing the various callbacks that the generic code will
use to get to your platform specific code
c) Add a reference to your "ppc_md" structure in the
"machines" table in arch/powerpc/kernel/setup_64.c if you are
a 64-bit platform.
d) request and get assigned a platform number (see PLATFORM_*
constants in arch/powerpc/include/asm/processor.h
32-bit embedded kernels:
Currently, board support is essentially an exclusive config option.
The kernel is configured for a single platform. Part of the reason
for this is to keep kernels on embedded systems small and efficient;
part of this is due to the fact the code is already that way. In the
future, a kernel may support multiple platforms, but only if the
A kernel image may support multiple platforms, but only if the
platforms feature the same core architecture. A single kernel build
cannot support both configurations with Book E and configurations
with classic Powerpc architectures.
32-bit embedded platforms that are moved into arch/powerpc using a
flattened device tree should adopt the merged tree practice of
setting ppc_md up dynamically, even though the kernel is currently
built with support for only a single platform at a time. This allows
unification of the setup code, and will make it easier to go to a
multiple-platform-support model in the future.
NOTE: I believe the above will be true once Ben's done with the merge
of the boot sequences.... someone speak up if this is wrong!
To add a 32-bit embedded platform support, follow the instructions
for 64-bit platforms above, with the exception that the Kconfig
option should be set up such that the kernel builds exclusively for
the platform selected. The processor type for the platform should
enable another config option to select the specific board
supported.
NOTE: If Ben doesn't merge the setup files, may need to change this to
point to setup_32.c
I will describe later the boot process and various callbacks that
your platform should implement.
II - The DT block format
========================
@ -300,8 +249,8 @@ the block to RAM before passing it to the kernel.
1) Header
---------
The kernel is entered with r3 pointing to an area of memory that is
roughly described in arch/powerpc/include/asm/prom.h by the structure
The kernel is passed the physical address pointing to an area of memory
that is roughly described in include/linux/of_fdt.h by the structure
boot_param_header:
struct boot_param_header {
@ -339,7 +288,7 @@ struct boot_param_header {
All values in this header are in big endian format, the various
fields in this header are defined more precisely below. All
"offset" values are in bytes from the start of the header; that is
from the value of r3.
from the physical base address of the device tree block.
- magic
@ -437,7 +386,7 @@ struct boot_param_header {
------------------------------
r3 -> | struct boot_param_header |
base -> | struct boot_param_header |
------------------------------
| (alignment gap) (*) |
------------------------------
@ -457,7 +406,7 @@ struct boot_param_header {
-----> ------------------------------
|
|
--- (r3 + totalsize)
--- (base + totalsize)
(*) The alignment gaps are not necessarily present; their presence
and size are dependent on the various alignment requirements of
@ -500,7 +449,7 @@ the device-tree structure. It is typically used to represent "path" in
the device-tree. More details about the actual format of these will be
below.
The kernel powerpc generic code does not make any formal use of the
The kernel generic code does not make any formal use of the
unit address (though some board support code may do) so the only real
requirement here for the unit address is to ensure uniqueness of
the node unit name at a given level of the tree. Nodes with no notion
@ -518,20 +467,21 @@ path to the root node is "/".
Every node which actually represents an actual device (that is, a node
which isn't only a virtual "container" for more nodes, like "/cpus"
is) is also required to have a "device_type" property indicating the
type of node .
is) is also required to have a "compatible" property indicating the
specific hardware and an optional list of devices it is fully
backwards compatible with.
Finally, every node that can be referenced from a property in another
node is required to have a "linux,phandle" property. Real open
firmware implementations provide a unique "phandle" value for every
node that the "prom_init()" trampoline code turns into
"linux,phandle" properties. However, this is made optional if the
flattened device tree is used directly. An example of a node
node is required to have either a "phandle" or a "linux,phandle"
property. Real Open Firmware implementations provide a unique
"phandle" value for every node that the "prom_init()" trampoline code
turns into "linux,phandle" properties. However, this is made optional
if the flattened device tree is used directly. An example of a node
referencing another node via "phandle" is when laying out the
interrupt tree which will be described in a further version of this
document.
This "linux, phandle" property is a 32-bit value that uniquely
The "phandle" property is a 32-bit value that uniquely
identifies a node. You are free to use whatever values or system of
values, internal pointers, or whatever to generate these, the only
requirement is that every node for which you provide that property has
@ -694,7 +644,7 @@ made of 3 cells, the bottom two containing the actual address itself
while the top cell contains address space indication, flags, and pci
bus & device numbers.
For busses that support dynamic allocation, it's the accepted practice
For buses that support dynamic allocation, it's the accepted practice
to then not provide the address in "reg" (keep it 0) though while
providing a flag indicating the address is dynamically allocated, and
then, to provide a separate "assigned-addresses" property that
@ -711,7 +661,7 @@ prom_parse.c file of the recent kernels for your bus type.
The "reg" property only defines addresses and sizes (if #size-cells is
non-0) within a given bus. In order to translate addresses upward
(that is into parent bus addresses, and possibly into CPU physical
addresses), all busses must contain a "ranges" property. If the
addresses), all buses must contain a "ranges" property. If the
"ranges" property is missing at a given level, it's assumed that
translation isn't possible, i.e., the registers are not visible on the
parent bus. The format of the "ranges" property for a bus is a list
@ -727,9 +677,9 @@ example, for a PCI host controller, that would be a CPU address. For a
PCI<->ISA bridge, that would be a PCI address. It defines the base
address in the parent bus where the beginning of that range is mapped.
For a new 64-bit powerpc board, I recommend either the 2/2 format or
For new 64-bit board support, I recommend either the 2/2 format or
Apple's 2/1 format which is slightly more compact since sizes usually
fit in a single 32-bit word. New 32-bit powerpc boards should use a
fit in a single 32-bit word. New 32-bit board support should use a
1/1 format, unless the processor supports physical addresses greater
than 32-bits, in which case a 2/1 format is recommended.
@ -754,7 +704,7 @@ of their actual names.
While earlier users of Open Firmware like OldWorld macintoshes tended
to use the actual device name for the "name" property, it's nowadays
considered a good practice to use a name that is closer to the device
class (often equal to device_type). For example, nowadays, ethernet
class (often equal to device_type). For example, nowadays, Ethernet
controllers are named "ethernet", an additional "model" property
defining precisely the chip type/model, and "compatible" property
defining the family in case a single driver can driver more than one
@ -772,7 +722,7 @@ is present).
4) Note about node and property names and character set
-------------------------------------------------------
While open firmware provides more flexible usage of 8859-1, this
While Open Firmware provides more flexible usage of 8859-1, this
specification enforces more strict rules. Nodes and properties should
be comprised only of ASCII characters 'a' to 'z', '0' to
'9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally
@ -792,7 +742,7 @@ address which can extend beyond that limit.
--------------------------------
These are all that are currently required. However, it is strongly
recommended that you expose PCI host bridges as documented in the
PCI binding to open firmware, and your interrupt tree as documented
PCI binding to Open Firmware, and your interrupt tree as documented
in OF interrupt tree specification.
a) The root node
@ -802,20 +752,12 @@ address which can extend beyond that limit.
- model : this is your board name/model
- #address-cells : address representation for "root" devices
- #size-cells: the size representation for "root" devices
- device_type : This property shouldn't be necessary. However, if
you decide to create a device_type for your root node, make sure it
is _not_ "chrp" unless your platform is a pSeries or PAPR compliant
one for 64-bit, or a CHRP-type machine for 32-bit as this will
matched by the kernel this way.
Additionally, some recommended properties are:
- compatible : the board "family" generally finds its way here,
for example, if you have 2 board models with a similar layout,
that typically get driven by the same platform code in the
kernel, you would use a different "model" property but put a
value in "compatible". The kernel doesn't directly use that
value but it is generally useful.
kernel, you would specify the exact board model in the
compatible property followed by an entry that represents the SoC
model.
The root node is also generally where you add additional properties
specific to your board like the serial number if any, that sort of
@ -841,8 +783,11 @@ address which can extend beyond that limit.
So under /cpus, you are supposed to create a node for every CPU on
the machine. There is no specific restriction on the name of the
CPU, though It's common practice to call it PowerPC,<name>. For
CPU, though it's common to call it <architecture>,<core>. For
example, Apple uses PowerPC,G5 while IBM uses PowerPC,970FX.
However, the Generic Names convention suggests that it would be
better to simply use 'cpu' for each cpu node and use the compatible
property to identify the specific cpu core.
Required properties:
@ -923,7 +868,7 @@ compatibility.
e) The /chosen node
This node is a bit "special". Normally, that's where open firmware
This node is a bit "special". Normally, that's where Open Firmware
puts some variable environment information, like the arguments, or
the default input/output devices.
@ -940,11 +885,7 @@ compatibility.
console device if any. Typically, if you have serial devices on
your board, you may want to put the full path to the one set as
the default console in the firmware here, for the kernel to pick
it up as its own default console. If you look at the function
set_preferred_console() in arch/ppc64/kernel/setup.c, you'll see
that the kernel tries to find out the default console and has
knowledge of various types like 8250 serial ports. You may want
to extend this function to add your own.
it up as its own default console.
Note that u-boot creates and fills in the chosen node for platforms
that use it.
@ -955,23 +896,23 @@ compatibility.
f) the /soc<SOCname> node
This node is used to represent a system-on-a-chip (SOC) and must be
present if the processor is a SOC. The top-level soc node contains
information that is global to all devices on the SOC. The node name
should contain a unit address for the SOC, which is the base address
of the memory-mapped register set for the SOC. The name of an soc
This node is used to represent a system-on-a-chip (SoC) and must be
present if the processor is a SoC. The top-level soc node contains
information that is global to all devices on the SoC. The node name
should contain a unit address for the SoC, which is the base address
of the memory-mapped register set for the SoC. The name of an SoC
node should start with "soc", and the remainder of the name should
represent the part number for the soc. For example, the MPC8540's
soc node would be called "soc8540".
Required properties:
- device_type : Should be "soc"
- ranges : Should be defined as specified in 1) to describe the
translation of SOC addresses for memory mapped SOC registers.
- bus-frequency: Contains the bus frequency for the SOC node.
translation of SoC addresses for memory mapped SoC registers.
- bus-frequency: Contains the bus frequency for the SoC node.
Typically, the value of this field is filled in by the boot
loader.
- compatible : Exact model of the SoC
Recommended properties:
@ -1155,12 +1096,13 @@ while all this has been defined and implemented.
- An example of code for iterating nodes & retrieving properties
directly from the flattened tree format can be found in the kernel
file arch/ppc64/kernel/prom.c, look at scan_flat_dt() function,
file drivers/of/fdt.c. Look at the of_scan_flat_dt() function,
its usage in early_init_devtree(), and the corresponding various
early_init_dt_scan_*() callbacks. That code can be re-used in a
GPL bootloader, and as the author of that code, I would be happy
to discuss possible free licensing to any vendor who wishes to
integrate all or part of this code into a non-GPL bootloader.
(reference needed; who is 'I' here? ---gcl Jan 31, 2011)
@ -1203,18 +1145,19 @@ MPC8540.
2) Representing devices without a current OF specification
----------------------------------------------------------
Currently, there are many devices on SOCs that do not have a standard
representation pre-defined as part of the open firmware
specifications, mainly because the boards that contain these SOCs are
not currently booted using open firmware. This section contains
descriptions for the SOC devices for which new nodes have been
defined; this list will expand as more and more SOC-containing
platforms are moved over to use the flattened-device-tree model.
Currently, there are many devices on SoCs that do not have a standard
representation defined as part of the Open Firmware specifications,
mainly because the boards that contain these SoCs are not currently
booted using Open Firmware. Binding documentation for new devices
should be added to the Documentation/devicetree/bindings directory.
That directory will expand as device tree support is added to more and
more SoCs.
VII - Specifying interrupt information for devices
===================================================
The device tree represents the busses and devices of a hardware
The device tree represents the buses and devices of a hardware
system in a form similar to the physical bus topology of the
hardware.

View File

@ -603,3 +603,19 @@ Why: The adm9240, w83792d and w83793 hardware monitoring drivers have
Who: Jean Delvare <khali@linux-fr.org>
----------------------------
What: noswapaccount kernel command line parameter
When: 2.6.40
Why: The original implementation of memsw feature enabled by
CONFIG_CGROUP_MEM_RES_CTLR_SWAP could be disabled by the noswapaccount
kernel parameter (introduced in 2.6.29-rc1). Later on, this decision
turned out to be not ideal because we cannot have the feature compiled
in and disabled by default and let only interested to enable it
(e.g. general distribution kernels might need it). Therefore we have
added swapaccount[=0|1] parameter (introduced in 2.6.37) which provides
the both possibilities. If we remove noswapaccount we will have
less command line parameters with the same functionality and we
can also cleanup the parameter handling a bit ().
Who: Michal Hocko <mhocko@suse.cz>
----------------------------

View File

@ -460,6 +460,8 @@ Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
2.1.30:
- Fix writev() (it kept writing the first segment over and over again
instead of moving onto subsequent segments).
- Fix crash in ntfs_mft_record_alloc() when mapping the new extent mft
record failed.
2.1.29:
- Fix a deadlock when mounting read-write.
2.1.28:

View File

@ -51,7 +51,8 @@ Supported chips:
* JEDEC JC 42.4 compliant temperature sensor chips
Prefix: 'jc42'
Addresses scanned: I2C 0x18 - 0x1f
Datasheet: -
Datasheet:
http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
Author:
Guenter Roeck <guenter.roeck@ericsson.com>
@ -60,7 +61,11 @@ Author:
Description
-----------
This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
which are used on many DDR3 memory modules for mobile devices and servers. Some
systems use the sensor to prevent memory overheating by automatically throttling
the memory controller.
The driver auto-detects the chips listed above, but can be manually instantiated
to support other JC 42.4 compliant chips.
@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
which applies to all limits. This register can be written by writing into
temp1_crit_hyst. Other hysteresis attributes are read-only.
If the BIOS has configured the sensor for automatic temperature management, it
is likely that it has locked the registers, i.e., that the temperature limits
cannot be changed.
Sysfs entries
-------------
temp1_input Temperature (RO)
temp1_min Minimum temperature (RW)
temp1_max Maximum temperature (RW)
temp1_crit Critical high temperature (RW)
temp1_min Minimum temperature (RO or RW)
temp1_max Maximum temperature (RO or RW)
temp1_crit Critical high temperature (RO or RW)
temp1_crit_hyst Critical hysteresis temperature (RW)
temp1_crit_hyst Critical hysteresis temperature (RO or RW)
temp1_max_hyst Maximum hysteresis temperature (RO)
temp1_min_alarm Temperature low alarm

View File

@ -9,6 +9,8 @@ Supported chips:
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
* AMD Family 12h processors: "Llano"
* AMD Family 14h processors: "Brazos" (C/E/G-Series)
Prefix: 'k10temp'
Addresses scanned: PCI space
@ -17,10 +19,14 @@ Supported chips:
http://support.amd.com/us/Processor_TechDocs/31116.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41256.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
http://support.amd.com/us/Processor_TechDocs/43170.pdf
Revision Guide for AMD Family 10h Processors:
http://support.amd.com/us/Processor_TechDocs/41322.pdf
Revision Guide for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41788.pdf
Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
http://support.amd.com/us/Processor_TechDocs/47534.pdf
AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
http://support.amd.com/us/Processor_TechDocs/43373.pdf
AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@ -34,7 +40,7 @@ Description
-----------
This driver permits reading of the internal temperature sensor of AMD
Family 10h and 11h processors.
Family 10h/11h/12h/14h processors.
All these processors have a sensor, but on those for Socket F or AM2+,
the sensor may return inconsistent values (erratum 319). The driver

View File

@ -43,11 +43,11 @@ parameter is applicable:
AVR32 AVR32 architecture is enabled.
AX25 Appropriate AX.25 support is enabled.
BLACKFIN Blackfin architecture is enabled.
DRM Direct Rendering Management support is enabled.
DYNAMIC_DEBUG Build in debug messages and enable them at runtime
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
EFI EFI Partitioning (GPT) is enabled
EIDE EIDE/ATAPI support is enabled.
DRM Direct Rendering Management support is enabled.
DYNAMIC_DEBUG Build in debug messages and enable them at runtime
FB The frame buffer device is enabled.
GCOV GCOV profiling is enabled.
HW Appropriate hardware is enabled.
@ -144,6 +144,11 @@ a fixed number of characters. This limit depends on the architecture
and is between 256 and 4096 characters. It is defined in the file
./include/asm/setup.h as COMMAND_LINE_SIZE.
Finally, the [KMG] suffix is commonly described after a number of kernel
parameter values. These 'K', 'M', and 'G' letters represent the _binary_
multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
bytes respectively. Such letter suffixes can also be entirely omitted.
acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
@ -545,16 +550,20 @@ and is between 256 and 4096 characters. It is defined in the file
Format:
<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
crashkernel=nn[KMG]@ss[KMG]
[KNL] Reserve a chunk of physical memory to
hold a kernel to switch to with kexec on panic.
crashkernel=size[KMG][@offset[KMG]]
[KNL] Using kexec, Linux can switch to a 'crash kernel'
upon panic. This parameter reserves the physical
memory region [offset, offset + size] for that kernel
image. If '@offset' is omitted, then a suitable offset
is selected automatically. Check
Documentation/kdump/kdump.txt for further details.
crashkernel=range1:size1[,range2:size2,...][@offset]
[KNL] Same as above, but depends on the memory
in the running system. The syntax of range is
start-[end] where start and end are both
a memory unit (amount[KMG]). See also
Documentation/kdump/kdump.txt for a example.
Documentation/kdump/kdump.txt for an example.
cs89x0_dma= [HW,NET]
Format: <dma>
@ -1262,10 +1271,9 @@ and is between 256 and 4096 characters. It is defined in the file
6 (KERN_INFO) informational
7 (KERN_DEBUG) debug-level messages
log_buf_len=n Sets the size of the printk ring buffer, in bytes.
Format: { n | nk | nM }
n must be a power of two. The default size
is set in the kernel config file.
log_buf_len=n[KMG] Sets the size of the printk ring buffer,
in bytes. n must be a power of two. The default
size is set in the kernel config file.
logo.nologo [FB] Disables display of the built-in Linux logo.
This may be used to provide more screen space for

View File

@ -40,8 +40,6 @@ decnet.txt
- info on using the DECnet networking layer in Linux.
depca.txt
- the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver
dgrs.txt
- the Digi International RightSwitch SE-X Ethernet driver
dmfe.txt
- info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
e100.txt
@ -50,8 +48,6 @@ e1000.txt
- info on Intel's E1000 line of gigabit ethernet boards
eql.txt
- serial IP load balancing
ethertap.txt
- the Ethertap user space packet reception and transmission driver
ewrk3.txt
- the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
filter.txt
@ -104,8 +100,6 @@ tuntap.txt
- TUN/TAP device driver, allowing user space Rx/Tx of packets.
vortex.txt
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
wavelan.txt
- AT&T GIS (nee NCR) WaveLAN card: An Ethernet-like radio transceiver
x25.txt
- general info on X.25 development.
x25-iface.txt

View File

@ -4,6 +4,8 @@ obj- := dummy.o
# List of programs to build
hostprogs-y := ifenslave
HOSTCFLAGS_ifenslave.o += -I$(objtree)/usr/include
# Tell kbuild to always build the programs
always := $(hostprogs-y)

View File

@ -49,7 +49,8 @@ Table of Contents
3.3 Configuring Bonding Manually with Ifenslave
3.3.1 Configuring Multiple Bonds Manually
3.4 Configuring Bonding Manually via Sysfs
3.5 Overriding Configuration for Special Cases
3.5 Configuration with Interfaces Support
3.6 Overriding Configuration for Special Cases
4. Querying Bonding Configuration
4.1 Bonding Configuration
@ -161,8 +162,8 @@ onwards) do not have /usr/include/linux symbolically linked to the
default kernel source include directory.
SECOND IMPORTANT NOTE:
If you plan to configure bonding using sysfs, you do not need
to use ifenslave.
If you plan to configure bonding using sysfs or using the
/etc/network/interfaces file, you do not need to use ifenslave.
2. Bonding Driver Options
=========================
@ -779,22 +780,26 @@ resend_igmp
You can configure bonding using either your distro's network
initialization scripts, or manually using either ifenslave or the
sysfs interface. Distros generally use one of two packages for the
network initialization scripts: initscripts or sysconfig. Recent
versions of these packages have support for bonding, while older
sysfs interface. Distros generally use one of three packages for the
network initialization scripts: initscripts, sysconfig or interfaces.
Recent versions of these packages have support for bonding, while older
versions do not.
We will first describe the options for configuring bonding for
distros using versions of initscripts and sysconfig with full or
partial support for bonding, then provide information on enabling
distros using versions of initscripts, sysconfig and interfaces with full
or partial support for bonding, then provide information on enabling
bonding without support from the network initialization scripts (i.e.,
older versions of initscripts or sysconfig).
If you're unsure whether your distro uses sysconfig or
initscripts, or don't know if it's new enough, have no fear.
If you're unsure whether your distro uses sysconfig,
initscripts or interfaces, or don't know if it's new enough, have no fear.
Determining this is fairly straightforward.
First, issue the command:
First, look for a file called interfaces in /etc/network directory.
If this file is present in your system, then your system use interfaces. See
Configuration with Interfaces Support.
Else, issue the command:
$ rpm -qf /sbin/ifup
@ -1327,8 +1332,62 @@ echo 2000 > /sys/class/net/bond1/bonding/arp_interval
echo +eth2 > /sys/class/net/bond1/bonding/slaves
echo +eth3 > /sys/class/net/bond1/bonding/slaves
3.5 Overriding Configuration for Special Cases
3.5 Configuration with Interfaces Support
-----------------------------------------
This section applies to distros which use /etc/network/interfaces file
to describe network interface configuration, most notably Debian and it's
derivatives.
The ifup and ifdown commands on Debian don't support bonding out of
the box. The ifenslave-2.6 package should be installed to provide bonding
support. Once installed, this package will provide bond-* options to be used
into /etc/network/interfaces.
Note that ifenslave-2.6 package will load the bonding module and use
the ifenslave command when appropriate.
Example Configurations
----------------------
In /etc/network/interfaces, the following stanza will configure bond0, in
active-backup mode, with eth0 and eth1 as slaves.
auto bond0
iface bond0 inet dhcp
bond-slaves eth0 eth1
bond-mode active-backup
bond-miimon 100
bond-primary eth0 eth1
If the above configuration doesn't work, you might have a system using
upstart for system startup. This is most notably true for recent
Ubuntu versions. The following stanza in /etc/network/interfaces will
produce the same result on those systems.
auto bond0
iface bond0 inet dhcp
bond-slaves none
bond-mode active-backup
bond-miimon 100
auto eth0
iface eth0 inet manual
bond-master bond0
bond-primary eth0 eth1
auto eth1
iface eth1 inet manual
bond-master bond0
bond-primary eth0 eth1
For a full list of bond-* supported options in /etc/network/interfaces and some
more advanced examples tailored to you particular distros, see the files in
/usr/share/doc/ifenslave-2.6.
3.6 Overriding Configuration for Special Cases
----------------------------------------------
When using the bonding driver, the physical port which transmits a frame is
typically selected by the bonding driver, and is not relevant to the user or
system administrator. The output port is simply selected using the policies of

View File

@ -61,7 +61,6 @@ before the more general line given above as the first match is the one taken.
create dns_resolver foo:* * /usr/sbin/dns.foo %k
=====
USAGE
=====
@ -104,6 +103,14 @@ implemented in the module can be called after doing:
returned also.
===============================
READING DNS KEYS FROM USERSPACE
===============================
Keys of dns_resolver type can be read from userspace using keyctl_read() or
"keyctl read/print/pipe".
=========
MECHANISM
=========

View File

@ -187,7 +187,7 @@ tcp_cookie_size - INTEGER
tcp_dsack - BOOLEAN
Allows TCP to send "duplicate" SACKs.
tcp_ecn - BOOLEAN
tcp_ecn - INTEGER
Enable Explicit Congestion Notification (ECN) in TCP. ECN is only
used when both ends of the TCP flow support it. It is useful to
avoid losses due to congestion (when the bottleneck router supports

View File

@ -1,3 +1,7 @@
Version 15 of schedstats dropped counters for some sched_yield:
yld_exp_empty, yld_act_empty and yld_both_empty. Otherwise, it is
identical to version 14.
Version 14 of schedstats includes support for sched_domains, which hit the
mainline kernel in 2.6.20 although it is identical to the stats from version
12 which was in the kernel from 2.6.13-2.6.19 (version 13 never saw a kernel
@ -28,32 +32,25 @@ to write their own scripts, the fields are described here.
CPU statistics
--------------
cpu<N> 1 2 3 4 5 6 7 8 9 10 11 12
cpu<N> 1 2 3 4 5 6 7 8 9
NOTE: In the sched_yield() statistics, the active queue is considered empty
if it has only one process in it, since obviously the process calling
sched_yield() is that process.
First four fields are sched_yield() statistics:
1) # of times both the active and the expired queue were empty
2) # of times just the active queue was empty
3) # of times just the expired queue was empty
4) # of times sched_yield() was called
First field is a sched_yield() statistic:
1) # of times sched_yield() was called
Next three are schedule() statistics:
5) # of times we switched to the expired queue and reused it
6) # of times schedule() was called
7) # of times schedule() left the processor idle
2) # of times we switched to the expired queue and reused it
3) # of times schedule() was called
4) # of times schedule() left the processor idle
Next two are try_to_wake_up() statistics:
8) # of times try_to_wake_up() was called
9) # of times try_to_wake_up() was called to wake up the local cpu
5) # of times try_to_wake_up() was called
6) # of times try_to_wake_up() was called to wake up the local cpu
Next three are statistics describing scheduling latency:
10) sum of all time spent running by tasks on this processor (in jiffies)
11) sum of all time spent waiting to run by tasks on this processor (in
7) sum of all time spent running by tasks on this processor (in jiffies)
8) sum of all time spent waiting to run by tasks on this processor (in
jiffies)
12) # of timeslices run on this cpu
9) # of timeslices run on this cpu
Domain statistics

View File

@ -296,6 +296,7 @@ Conexant 5066
=============
laptop Basic Laptop config (default)
hp-laptop HP laptops, e g G60
asus Asus K52JU, Lenovo G560
dell-laptop Dell laptops
dell-vostro Dell Vostro
olpc-xo-1_5 OLPC XO 1.5

View File

@ -190,9 +190,9 @@ resources, scheduled and executed.
* Long running CPU intensive workloads which can be better
managed by the system scheduler.
WQ_FREEZEABLE
WQ_FREEZABLE
A freezeable wq participates in the freeze phase of the system
A freezable wq participates in the freeze phase of the system
suspend operations. Work items on the wq are drained and no
new work item starts execution until thawed.

View File

@ -885,7 +885,7 @@ S: Supported
ARM/QUALCOMM MSM MACHINE SUPPORT
M: David Brown <davidb@codeaurora.org>
M: Daniel Walker <dwalker@codeaurora.org>
M: Daniel Walker <dwalker@fifo99.com>
M: Bryan Huntsman <bryanh@codeaurora.org>
L: linux-arm-msm@vger.kernel.org
F: arch/arm/mach-msm/
@ -978,6 +978,8 @@ S: Maintained
F: arch/arm/plat-samsung/
F: arch/arm/plat-s3c24xx/
F: arch/arm/plat-s5p/
F: drivers/*/*s3c2410*
F: drivers/*/*/*s3c2410*
ARM/S3C2410 ARM ARCHITECTURE
M: Ben Dooks <ben-linux@fluff.org>
@ -1008,6 +1010,15 @@ L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-s5p*/
ARM/SAMSUNG MOBILE MACHINE SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-s5pv210/mach-aquila.c
F: arch/arm/mach-s5pv210/mach-goni.c
F: arch/arm/mach-exynos4/mach-universal_c210.c
F: arch/arm/mach-exynos4/mach-nuri.c
ARM/SAMSUNG S5P SERIES FIMC SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
@ -1465,6 +1476,7 @@ F: include/net/bluetooth/
BONDING DRIVER
M: Jay Vosburgh <fubar@us.ibm.com>
M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/bonding/
S: Supported
@ -1690,6 +1702,13 @@ M: Andy Whitcroft <apw@canonical.com>
S: Supported
F: scripts/checkpatch.pl
CHINESE DOCUMENTATION
M: Harry Wei <harryxiyou@gmail.com>
L: xiyoulinuxkernelgroup@googlegroups.com
L: linux-kernel@zh-kernel.org (moderated for non-subscribers)
S: Maintained
F: Documentation/zh_CN/
CISCO VIC ETHERNET NIC DRIVER
M: Vasanthy Kolluri <vkolluri@cisco.com>
M: Roopa Prabhu <roprabhu@cisco.com>
@ -2024,7 +2043,7 @@ F: Documentation/scsi/dc395x.txt
F: drivers/scsi/dc395x.*
DCCP PROTOCOL
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
M: Gerrit Renker <gerrit@erg.abdn.ac.uk>
L: dccp@vger.kernel.org
W: http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
S: Maintained
@ -2124,6 +2143,7 @@ S: Supported
F: fs/dlm/
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
M: Vinod Koul <vinod.koul@intel.com>
M: Dan Williams <dan.j.williams@intel.com>
S: Supported
F: drivers/dma/
@ -2772,6 +2792,15 @@ F: Documentation/isdn/README.gigaset
F: drivers/isdn/gigaset/
F: include/linux/gigaset_dev.h
GPIO SUBSYSTEM
M: Grant Likely <grant.likely@secretlab.ca>
L: linux-kernel@vger.kernel.org
S: Maintained
T: git git://git.secretlab.ca/git/linux-2.6.git
F: Documentation/gpio/gpio.txt
F: drivers/gpio/
F: include/linux/gpio*
GRETH 10/100/1G Ethernet MAC device driver
M: Kristoffer Glembo <kristoffer@gaisler.com>
L: netdev@vger.kernel.org
@ -2861,7 +2890,6 @@ M: Guenter Roeck <guenter.roeck@ericsson.com>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
T: quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
S: Maintained
F: Documentation/hwmon/
@ -3139,6 +3167,12 @@ S: Maintained
F: net/ieee802154/
F: drivers/ieee802154/
IKANOS/ADI EAGLE ADSL USB DRIVER
M: Matthieu Castet <castet.matthieu@free.fr>
M: Stanislaw Gruszka <stf_xl@wp.pl>
S: Maintained
F: drivers/usb/atm/ueagle-atm.c
INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
M: Mimi Zohar <zohar@us.ibm.com>
S: Supported
@ -3327,7 +3361,6 @@ F: drivers/net/wimax/i2400m/
F: include/linux/wimax/i2400m.h
INTEL WIRELESS WIFI LINK (iwlwifi)
M: Reinette Chatre <reinette.chatre@intel.com>
M: Wey-Yi Guy <wey-yi.w.guy@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
@ -3496,7 +3529,7 @@ F: drivers/hwmon/jc42.c
F: Documentation/hwmon/jc42
JFS FILESYSTEM
M: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
M: Dave Kleikamp <shaggy@kernel.org>
L: jfs-discussion@lists.sourceforge.net
W: http://jfs.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
@ -3674,6 +3707,28 @@ F: include/linux/key-type.h
F: include/keys/
F: security/keys/
KEYS-TRUSTED
M: David Safford <safford@watson.ibm.com>
M: Mimi Zohar <zohar@us.ibm.com>
L: linux-security-module@vger.kernel.org
L: keyrings@linux-nfs.org
S: Supported
F: Documentation/keys-trusted-encrypted.txt
F: include/keys/trusted-type.h
F: security/keys/trusted.c
F: security/keys/trusted.h
KEYS-ENCRYPTED
M: Mimi Zohar <zohar@us.ibm.com>
M: David Safford <safford@watson.ibm.com>
L: linux-security-module@vger.kernel.org
L: keyrings@linux-nfs.org
S: Supported
F: Documentation/keys-trusted-encrypted.txt
F: include/keys/encrypted-type.h
F: security/keys/encrypted.c
F: security/keys/encrypted.h
KGDB / KDB /debug_core
M: Jason Wessel <jason.wessel@windriver.com>
W: http://kgdb.wiki.kernel.org/
@ -4562,7 +4617,7 @@ F: drivers/i2c/busses/i2c-ocores.c
OPEN FIRMWARE AND FLATTENED DEVICE TREE
M: Grant Likely <grant.likely@secretlab.ca>
L: devicetree-discuss@lists.ozlabs.org
L: devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
W: http://fdt.secretlab.ca
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
@ -5126,6 +5181,7 @@ F: drivers/char/random.c
RAPIDIO SUBSYSTEM
M: Matt Porter <mporter@kernel.crashing.org>
M: Alexandre Bounine <alexandre.bounine@idt.com>
S: Maintained
F: drivers/rapidio/
@ -5228,7 +5284,7 @@ S: Maintained
F: drivers/net/wireless/rtl818x/rtl8180/
RTL8187 WIRELESS DRIVER
M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
M: Herton Ronaldo Krzesinski <herton@canonical.com>
M: Hin-Tak Leung <htl10@users.sourceforge.net>
M: Larry Finger <Larry.Finger@lwfinger.net>
L: linux-wireless@vger.kernel.org
@ -5522,12 +5578,11 @@ S: Supported
F: drivers/scsi/be2iscsi/
SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
M: Sathya Perla <sathyap@serverengines.com>
M: Subbu Seetharaman <subbus@serverengines.com>
M: Sarveshwar Bandi <sarveshwarb@serverengines.com>
M: Ajit Khaparde <ajitk@serverengines.com>
M: Sathya Perla <sathya.perla@emulex.com>
M: Subbu Seetharaman <subbu.seetharaman@emulex.com>
M: Ajit Khaparde <ajit.khaparde@emulex.com>
L: netdev@vger.kernel.org
W: http://www.serverengines.com
W: http://www.emulex.com
S: Supported
F: drivers/net/benet/
@ -5587,18 +5642,20 @@ F: include/linux/sfi*.h
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
M: Vincent Sanders <support@simtec.co.uk>
P: Vincent Sanders <vince@simtec.co.uk>
M: Simtec Linux Team <linux@simtec.co.uk>
W: http://www.simtec.co.uk/products/EB110ATX/
S: Supported
SIMTEC EB2410ITX (BAST)
P: Ben Dooks
M: Vincent Sanders <support@simtec.co.uk>
P: Vincent Sanders <vince@simtec.co.uk>
M: Simtec Linux Team <linux@simtec.co.uk>
W: http://www.simtec.co.uk/products/EB2410ITX/
S: Supported
F: arch/arm/mach-s3c2410/
F: drivers/*/*s3c2410*
F: drivers/*/*/*s3c2410*
F: arch/arm/mach-s3c2410/mach-bast.c
F: arch/arm/mach-s3c2410/bast-ide.c
F: arch/arm/mach-s3c2410/bast-irq.c
TI DAVINCI MACHINE SUPPORT
M: Kevin Hilman <khilman@deeprootsystems.com>
@ -6065,7 +6122,7 @@ S: Maintained
F: security/tomoyo/
TOPSTAR LAPTOP EXTRAS DRIVER
M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
M: Herton Ronaldo Krzesinski <herton@canonical.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/topstar-laptop.c
@ -6573,6 +6630,16 @@ S: Maintained
F: drivers/char/virtio_console.c
F: include/linux/virtio_console.h
VIRTIO CORE, NET AND BLOCK DRIVERS
M: Rusty Russell <rusty@rustcorp.com.au>
M: "Michael S. Tsirkin" <mst@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/virtio/
F: drivers/net/virtio_net.c
F: drivers/block/virtio_blk.c
F: include/linux/virtio_*.h
VIRTIO HOST (VHOST)
M: "Michael S. Tsirkin" <mst@redhat.com>
L: kvm@vger.kernel.org
@ -6746,12 +6813,12 @@ S: Maintained
F: drivers/net/wireless/wl1251/*
WL1271 WIRELESS DRIVER
M: Luciano Coelho <luciano.coelho@nokia.com>
M: Luciano Coelho <coelho@ti.com>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/wl12xx
T: git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
S: Maintained
F: drivers/net/wireless/wl12xx/wl1271*
F: drivers/net/wireless/wl12xx/
F: include/linux/wl12xx.h
WL3501 WIRELESS PCMCIA CARD DRIVER

View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 38
EXTRAVERSION = -rc2
EXTRAVERSION = -rc8
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*

View File

@ -11,6 +11,7 @@ config ALPHA
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_HARDIRQS_NO_DEPRECATED
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,

View File

@ -44,11 +44,16 @@ static char irq_user_affinity[NR_IRQS];
int irq_select_affinity(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc[irq];
struct irq_data *data = irq_get_irq_data(irq);
struct irq_chip *chip;
static int last_cpu;
int cpu = last_cpu + 1;
if (!desc || !get_irq_desc_chip(desc)->set_affinity || irq_user_affinity[irq])
if (!data)
return 1;
chip = irq_data_get_irq_chip(data);
if (!chip->irq_set_affinity || irq_user_affinity[irq])
return 1;
while (!cpu_possible(cpu) ||
@ -56,8 +61,8 @@ int irq_select_affinity(unsigned int irq)
cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
last_cpu = cpu;
cpumask_copy(desc->affinity, cpumask_of(cpu));
get_irq_desc_chip(desc)->set_affinity(irq, cpumask_of(cpu));
cpumask_copy(data->affinity, cpumask_of(cpu));
chip->irq_set_affinity(data, cpumask_of(cpu), false);
return 0;
}
#endif /* CONFIG_SMP */

View File

@ -228,14 +228,9 @@ struct irqaction timer_irqaction = {
void __init
init_rtc_irq(void)
{
struct irq_desc *desc = irq_to_desc(RTC_IRQ);
if (desc) {
desc->status |= IRQ_DISABLED;
set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
handle_simple_irq, "RTC");
setup_irq(RTC_IRQ, &timer_irqaction);
}
set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
handle_simple_irq, "RTC");
setup_irq(RTC_IRQ, &timer_irqaction);
}
/* Dummy irqactions. */

View File

@ -33,10 +33,10 @@ i8259_update_irq_hw(unsigned int irq, unsigned long mask)
}
inline void
i8259a_enable_irq(unsigned int irq)
i8259a_enable_irq(struct irq_data *d)
{
spin_lock(&i8259_irq_lock);
i8259_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
spin_unlock(&i8259_irq_lock);
}
@ -47,16 +47,18 @@ __i8259a_disable_irq(unsigned int irq)
}
void
i8259a_disable_irq(unsigned int irq)
i8259a_disable_irq(struct irq_data *d)
{
spin_lock(&i8259_irq_lock);
__i8259a_disable_irq(irq);
__i8259a_disable_irq(d->irq);
spin_unlock(&i8259_irq_lock);
}
void
i8259a_mask_and_ack_irq(unsigned int irq)
i8259a_mask_and_ack_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
spin_lock(&i8259_irq_lock);
__i8259a_disable_irq(irq);
@ -71,9 +73,9 @@ i8259a_mask_and_ack_irq(unsigned int irq)
struct irq_chip i8259a_irq_type = {
.name = "XT-PIC",
.unmask = i8259a_enable_irq,
.mask = i8259a_disable_irq,
.mask_ack = i8259a_mask_and_ack_irq,
.irq_unmask = i8259a_enable_irq,
.irq_mask = i8259a_disable_irq,
.irq_mask_ack = i8259a_mask_and_ack_irq,
};
void __init

View File

@ -31,11 +31,9 @@ extern void init_rtc_irq(void);
extern void common_init_isa_dma(void);
extern void i8259a_enable_irq(unsigned int);
extern void i8259a_disable_irq(unsigned int);
extern void i8259a_mask_and_ack_irq(unsigned int);
extern unsigned int i8259a_startup_irq(unsigned int);
extern void i8259a_end_irq(unsigned int);
extern void i8259a_enable_irq(struct irq_data *d);
extern void i8259a_disable_irq(struct irq_data *d);
extern void i8259a_mask_and_ack_irq(struct irq_data *d);
extern struct irq_chip i8259a_irq_type;
extern void init_i8259a_irqs(void);

View File

@ -29,21 +29,21 @@ pyxis_update_irq_hw(unsigned long mask)
}
static inline void
pyxis_enable_irq(unsigned int irq)
pyxis_enable_irq(struct irq_data *d)
{
pyxis_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
pyxis_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
pyxis_disable_irq(unsigned int irq)
pyxis_disable_irq(struct irq_data *d)
{
pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static void
pyxis_mask_and_ack_irq(unsigned int irq)
pyxis_mask_and_ack_irq(struct irq_data *d)
{
unsigned long bit = 1UL << (irq - 16);
unsigned long bit = 1UL << (d->irq - 16);
unsigned long mask = cached_irq_mask &= ~bit;
/* Disable the interrupt. */
@ -58,9 +58,9 @@ pyxis_mask_and_ack_irq(unsigned int irq)
static struct irq_chip pyxis_irq_type = {
.name = "PYXIS",
.mask_ack = pyxis_mask_and_ack_irq,
.mask = pyxis_disable_irq,
.unmask = pyxis_enable_irq,
.irq_mask_ack = pyxis_mask_and_ack_irq,
.irq_mask = pyxis_disable_irq,
.irq_unmask = pyxis_enable_irq,
};
void
@ -103,7 +103,7 @@ init_pyxis_irqs(unsigned long ignore_mask)
if ((ignore_mask >> i) & 1)
continue;
set_irq_chip_and_handler(i, &pyxis_irq_type, handle_level_irq);
irq_to_desc(i)->status |= IRQ_LEVEL;
irq_set_status_flags(i, IRQ_LEVEL);
}
setup_irq(16+7, &isa_cascade_irqaction);

View File

@ -18,27 +18,27 @@
DEFINE_SPINLOCK(srm_irq_lock);
static inline void
srm_enable_irq(unsigned int irq)
srm_enable_irq(struct irq_data *d)
{
spin_lock(&srm_irq_lock);
cserve_ena(irq - 16);
cserve_ena(d->irq - 16);
spin_unlock(&srm_irq_lock);
}
static void
srm_disable_irq(unsigned int irq)
srm_disable_irq(struct irq_data *d)
{
spin_lock(&srm_irq_lock);
cserve_dis(irq - 16);
cserve_dis(d->irq - 16);
spin_unlock(&srm_irq_lock);
}
/* Handle interrupts from the SRM, assuming no additional weirdness. */
static struct irq_chip srm_irq_type = {
.name = "SRM",
.unmask = srm_enable_irq,
.mask = srm_disable_irq,
.mask_ack = srm_disable_irq,
.irq_unmask = srm_enable_irq,
.irq_mask = srm_disable_irq,
.irq_mask_ack = srm_disable_irq,
};
void __init
@ -52,7 +52,7 @@ init_srm_irqs(long max, unsigned long ignore_mask)
if (i < 64 && ((ignore_mask >> i) & 1))
continue;
set_irq_chip_and_handler(i, &srm_irq_type, handle_level_irq);
irq_to_desc(i)->status |= IRQ_LEVEL;
irq_set_status_flags(i, IRQ_LEVEL);
}
}

View File

@ -44,31 +44,31 @@ alcor_update_irq_hw(unsigned long mask)
}
static inline void
alcor_enable_irq(unsigned int irq)
alcor_enable_irq(struct irq_data *d)
{
alcor_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
alcor_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
alcor_disable_irq(unsigned int irq)
alcor_disable_irq(struct irq_data *d)
{
alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static void
alcor_mask_and_ack_irq(unsigned int irq)
alcor_mask_and_ack_irq(struct irq_data *d)
{
alcor_disable_irq(irq);
alcor_disable_irq(d);
/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
*(vuip)GRU_INT_CLEAR = 1 << (irq - 16); mb();
*(vuip)GRU_INT_CLEAR = 1 << (d->irq - 16); mb();
*(vuip)GRU_INT_CLEAR = 0; mb();
}
static void
alcor_isa_mask_and_ack_irq(unsigned int irq)
alcor_isa_mask_and_ack_irq(struct irq_data *d)
{
i8259a_mask_and_ack_irq(irq);
i8259a_mask_and_ack_irq(d);
/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
*(vuip)GRU_INT_CLEAR = 0x80000000; mb();
@ -77,9 +77,9 @@ alcor_isa_mask_and_ack_irq(unsigned int irq)
static struct irq_chip alcor_irq_type = {
.name = "ALCOR",
.unmask = alcor_enable_irq,
.mask = alcor_disable_irq,
.mask_ack = alcor_mask_and_ack_irq,
.irq_unmask = alcor_enable_irq,
.irq_mask = alcor_disable_irq,
.irq_mask_ack = alcor_mask_and_ack_irq,
};
static void
@ -126,9 +126,9 @@ alcor_init_irq(void)
if (i >= 16+20 && i <= 16+30)
continue;
set_irq_chip_and_handler(i, &alcor_irq_type, handle_level_irq);
irq_to_desc(i)->status |= IRQ_LEVEL;
irq_set_status_flags(i, IRQ_LEVEL);
}
i8259a_irq_type.ack = alcor_isa_mask_and_ack_irq;
i8259a_irq_type.irq_ack = alcor_isa_mask_and_ack_irq;
init_i8259a_irqs();
common_init_isa_dma();

View File

@ -46,22 +46,22 @@ cabriolet_update_irq_hw(unsigned int irq, unsigned long mask)
}
static inline void
cabriolet_enable_irq(unsigned int irq)
cabriolet_enable_irq(struct irq_data *d)
{
cabriolet_update_irq_hw(irq, cached_irq_mask &= ~(1UL << irq));
cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq));
}
static void
cabriolet_disable_irq(unsigned int irq)
cabriolet_disable_irq(struct irq_data *d)
{
cabriolet_update_irq_hw(irq, cached_irq_mask |= 1UL << irq);
cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq);
}
static struct irq_chip cabriolet_irq_type = {
.name = "CABRIOLET",
.unmask = cabriolet_enable_irq,
.mask = cabriolet_disable_irq,
.mask_ack = cabriolet_disable_irq,
.irq_unmask = cabriolet_enable_irq,
.irq_mask = cabriolet_disable_irq,
.irq_mask_ack = cabriolet_disable_irq,
};
static void
@ -107,7 +107,7 @@ common_init_irq(void (*srm_dev_int)(unsigned long v))
for (i = 16; i < 35; ++i) {
set_irq_chip_and_handler(i, &cabriolet_irq_type,
handle_level_irq);
irq_to_desc(i)->status |= IRQ_LEVEL;
irq_set_status_flags(i, IRQ_LEVEL);
}
}

View File

@ -98,37 +98,37 @@ tsunami_update_irq_hw(unsigned long mask)
}
static void
dp264_enable_irq(unsigned int irq)
dp264_enable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask |= 1UL << irq;
cached_irq_mask |= 1UL << d->irq;
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
dp264_disable_irq(unsigned int irq)
dp264_disable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask &= ~(1UL << irq);
cached_irq_mask &= ~(1UL << d->irq);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
clipper_enable_irq(unsigned int irq)
clipper_enable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask |= 1UL << (irq - 16);
cached_irq_mask |= 1UL << (d->irq - 16);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
clipper_disable_irq(unsigned int irq)
clipper_disable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask &= ~(1UL << (irq - 16));
cached_irq_mask &= ~(1UL << (d->irq - 16));
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
@ -149,10 +149,11 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
}
static int
dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
{
dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity,
bool force)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(irq, *affinity);
cpu_set_irq_affinity(d->irq, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
@ -160,10 +161,11 @@ dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
}
static int
clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
{
clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity,
bool force)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(irq - 16, *affinity);
cpu_set_irq_affinity(d->irq - 16, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
@ -171,19 +173,19 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
}
static struct irq_chip dp264_irq_type = {
.name = "DP264",
.unmask = dp264_enable_irq,
.mask = dp264_disable_irq,
.mask_ack = dp264_disable_irq,
.set_affinity = dp264_set_affinity,
.name = "DP264",
.irq_unmask = dp264_enable_irq,
.irq_mask = dp264_disable_irq,
.irq_mask_ack = dp264_disable_irq,
.irq_set_affinity = dp264_set_affinity,
};
static struct irq_chip clipper_irq_type = {
.name = "CLIPPER",
.unmask = clipper_enable_irq,
.mask = clipper_disable_irq,
.mask_ack = clipper_disable_irq,
.set_affinity = clipper_set_affinity,
.name = "CLIPPER",
.irq_unmask = clipper_enable_irq,
.irq_mask = clipper_disable_irq,
.irq_mask_ack = clipper_disable_irq,
.irq_set_affinity = clipper_set_affinity,
};
static void
@ -268,8 +270,8 @@ init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, ops, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
}

View File

@ -44,22 +44,22 @@ eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
}
static inline void
eb64p_enable_irq(unsigned int irq)
eb64p_enable_irq(struct irq_data *d)
{
eb64p_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
}
static void
eb64p_disable_irq(unsigned int irq)
eb64p_disable_irq(struct irq_data *d)
{
eb64p_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
}
static struct irq_chip eb64p_irq_type = {
.name = "EB64P",
.unmask = eb64p_enable_irq,
.mask = eb64p_disable_irq,
.mask_ack = eb64p_disable_irq,
.irq_unmask = eb64p_enable_irq,
.irq_mask = eb64p_disable_irq,
.irq_mask_ack = eb64p_disable_irq,
};
static void
@ -118,9 +118,9 @@ eb64p_init_irq(void)
init_i8259a_irqs();
for (i = 16; i < 32; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
}
irq_set_status_flags(i, IRQ_LEVEL);
}
common_init_isa_dma();
setup_irq(16+5, &isa_cascade_irqaction);

View File

@ -51,16 +51,18 @@ eiger_update_irq_hw(unsigned long irq, unsigned long mask)
}
static inline void
eiger_enable_irq(unsigned int irq)
eiger_enable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
eiger_update_irq_hw(irq, mask);
}
static void
eiger_disable_irq(unsigned int irq)
eiger_disable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
eiger_update_irq_hw(irq, mask);
@ -68,9 +70,9 @@ eiger_disable_irq(unsigned int irq)
static struct irq_chip eiger_irq_type = {
.name = "EIGER",
.unmask = eiger_enable_irq,
.mask = eiger_disable_irq,
.mask_ack = eiger_disable_irq,
.irq_unmask = eiger_enable_irq,
.irq_mask = eiger_disable_irq,
.irq_mask_ack = eiger_disable_irq,
};
static void
@ -136,8 +138,8 @@ eiger_init_irq(void)
init_i8259a_irqs();
for (i = 16; i < 128; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &eiger_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
}

View File

@ -63,34 +63,34 @@
*/
static void
jensen_local_enable(unsigned int irq)
jensen_local_enable(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
if (irq == 7)
i8259a_enable_irq(1);
if (d->irq == 7)
i8259a_enable_irq(d);
}
static void
jensen_local_disable(unsigned int irq)
jensen_local_disable(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
if (irq == 7)
i8259a_disable_irq(1);
if (d->irq == 7)
i8259a_disable_irq(d);
}
static void
jensen_local_mask_ack(unsigned int irq)
jensen_local_mask_ack(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
if (irq == 7)
i8259a_mask_and_ack_irq(1);
if (d->irq == 7)
i8259a_mask_and_ack_irq(d);
}
static struct irq_chip jensen_local_irq_type = {
.name = "LOCAL",
.unmask = jensen_local_enable,
.mask = jensen_local_disable,
.mask_ack = jensen_local_mask_ack,
.irq_unmask = jensen_local_enable,
.irq_mask = jensen_local_disable,
.irq_mask_ack = jensen_local_mask_ack,
};
static void

View File

@ -104,9 +104,10 @@ io7_get_irq_ctl(unsigned int irq, struct io7 **pio7)
}
static void
io7_enable_irq(unsigned int irq)
io7_enable_irq(struct irq_data *d)
{
volatile unsigned long *ctl;
unsigned int irq = d->irq;
struct io7 *io7;
ctl = io7_get_irq_ctl(irq, &io7);
@ -115,7 +116,7 @@ io7_enable_irq(unsigned int irq)
__func__, irq);
return;
}
spin_lock(&io7->irq_lock);
*ctl |= 1UL << 24;
mb();
@ -124,9 +125,10 @@ io7_enable_irq(unsigned int irq)
}
static void
io7_disable_irq(unsigned int irq)
io7_disable_irq(struct irq_data *d)
{
volatile unsigned long *ctl;
unsigned int irq = d->irq;
struct io7 *io7;
ctl = io7_get_irq_ctl(irq, &io7);
@ -135,7 +137,7 @@ io7_disable_irq(unsigned int irq)
__func__, irq);
return;
}
spin_lock(&io7->irq_lock);
*ctl &= ~(1UL << 24);
mb();
@ -144,35 +146,29 @@ io7_disable_irq(unsigned int irq)
}
static void
marvel_irq_noop(unsigned int irq)
{
return;
}
static unsigned int
marvel_irq_noop_return(unsigned int irq)
{
return 0;
marvel_irq_noop(struct irq_data *d)
{
return;
}
static struct irq_chip marvel_legacy_irq_type = {
.name = "LEGACY",
.mask = marvel_irq_noop,
.unmask = marvel_irq_noop,
.irq_mask = marvel_irq_noop,
.irq_unmask = marvel_irq_noop,
};
static struct irq_chip io7_lsi_irq_type = {
.name = "LSI",
.unmask = io7_enable_irq,
.mask = io7_disable_irq,
.mask_ack = io7_disable_irq,
.irq_unmask = io7_enable_irq,
.irq_mask = io7_disable_irq,
.irq_mask_ack = io7_disable_irq,
};
static struct irq_chip io7_msi_irq_type = {
.name = "MSI",
.unmask = io7_enable_irq,
.mask = io7_disable_irq,
.ack = marvel_irq_noop,
.irq_unmask = io7_enable_irq,
.irq_mask = io7_disable_irq,
.irq_ack = marvel_irq_noop,
};
static void
@ -280,8 +276,8 @@ init_io7_irqs(struct io7 *io7,
/* Set up the lsi irqs. */
for (i = 0; i < 128; ++i) {
irq_to_desc(base + i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(base + i, lsi_ops, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
/* Disable the implemented irqs in hardware. */
@ -294,8 +290,8 @@ init_io7_irqs(struct io7 *io7,
/* Set up the msi irqs. */
for (i = 128; i < (128 + 512); ++i) {
irq_to_desc(base + i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(base + i, msi_ops, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
for (i = 0; i < 16; ++i)

View File

@ -43,22 +43,22 @@ mikasa_update_irq_hw(int mask)
}
static inline void
mikasa_enable_irq(unsigned int irq)
mikasa_enable_irq(struct irq_data *d)
{
mikasa_update_irq_hw(cached_irq_mask |= 1 << (irq - 16));
mikasa_update_irq_hw(cached_irq_mask |= 1 << (d->irq - 16));
}
static void
mikasa_disable_irq(unsigned int irq)
mikasa_disable_irq(struct irq_data *d)
{
mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (irq - 16)));
mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (d->irq - 16)));
}
static struct irq_chip mikasa_irq_type = {
.name = "MIKASA",
.unmask = mikasa_enable_irq,
.mask = mikasa_disable_irq,
.mask_ack = mikasa_disable_irq,
.irq_unmask = mikasa_enable_irq,
.irq_mask = mikasa_disable_irq,
.irq_mask_ack = mikasa_disable_irq,
};
static void
@ -98,8 +98,8 @@ mikasa_init_irq(void)
mikasa_update_irq_hw(0);
for (i = 16; i < 32; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &mikasa_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();

View File

@ -48,22 +48,22 @@ noritake_update_irq_hw(int irq, int mask)
}
static void
noritake_enable_irq(unsigned int irq)
noritake_enable_irq(struct irq_data *d)
{
noritake_update_irq_hw(irq, cached_irq_mask |= 1 << (irq - 16));
noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
}
static void
noritake_disable_irq(unsigned int irq)
noritake_disable_irq(struct irq_data *d)
{
noritake_update_irq_hw(irq, cached_irq_mask &= ~(1 << (irq - 16)));
noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
}
static struct irq_chip noritake_irq_type = {
.name = "NORITAKE",
.unmask = noritake_enable_irq,
.mask = noritake_disable_irq,
.mask_ack = noritake_disable_irq,
.irq_unmask = noritake_enable_irq,
.irq_mask = noritake_disable_irq,
.irq_mask_ack = noritake_disable_irq,
};
static void
@ -127,8 +127,8 @@ noritake_init_irq(void)
outw(0, 0x54c);
for (i = 16; i < 48; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &noritake_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();

View File

@ -56,9 +56,10 @@ rawhide_update_irq_hw(int hose, int mask)
(((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0))
static inline void
rawhide_enable_irq(unsigned int irq)
rawhide_enable_irq(struct irq_data *d)
{
unsigned int mask, hose;
unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
@ -76,9 +77,10 @@ rawhide_enable_irq(unsigned int irq)
}
static void
rawhide_disable_irq(unsigned int irq)
rawhide_disable_irq(struct irq_data *d)
{
unsigned int mask, hose;
unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
@ -96,9 +98,10 @@ rawhide_disable_irq(unsigned int irq)
}
static void
rawhide_mask_and_ack_irq(unsigned int irq)
rawhide_mask_and_ack_irq(struct irq_data *d)
{
unsigned int mask, mask1, hose;
unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
@ -123,9 +126,9 @@ rawhide_mask_and_ack_irq(unsigned int irq)
static struct irq_chip rawhide_irq_type = {
.name = "RAWHIDE",
.unmask = rawhide_enable_irq,
.mask = rawhide_disable_irq,
.mask_ack = rawhide_mask_and_ack_irq,
.irq_unmask = rawhide_enable_irq,
.irq_mask = rawhide_disable_irq,
.irq_mask_ack = rawhide_mask_and_ack_irq,
};
static void
@ -177,8 +180,8 @@ rawhide_init_irq(void)
}
for (i = 16; i < 128; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &rawhide_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();

View File

@ -47,22 +47,22 @@ rx164_update_irq_hw(unsigned long mask)
}
static inline void
rx164_enable_irq(unsigned int irq)
rx164_enable_irq(struct irq_data *d)
{
rx164_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
rx164_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
rx164_disable_irq(unsigned int irq)
rx164_disable_irq(struct irq_data *d)
{
rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static struct irq_chip rx164_irq_type = {
.name = "RX164",
.unmask = rx164_enable_irq,
.mask = rx164_disable_irq,
.mask_ack = rx164_disable_irq,
.irq_unmask = rx164_enable_irq,
.irq_mask = rx164_disable_irq,
.irq_mask_ack = rx164_disable_irq,
};
static void
@ -99,8 +99,8 @@ rx164_init_irq(void)
rx164_update_irq_hw(0);
for (i = 16; i < 40; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &rx164_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();

View File

@ -443,11 +443,11 @@ lynx_swizzle(struct pci_dev *dev, u8 *pinp)
/* GENERIC irq routines */
static inline void
sable_lynx_enable_irq(unsigned int irq)
sable_lynx_enable_irq(struct irq_data *d)
{
unsigned long bit, mask;
bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask &= ~(1UL << bit);
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@ -459,11 +459,11 @@ sable_lynx_enable_irq(unsigned int irq)
}
static void
sable_lynx_disable_irq(unsigned int irq)
sable_lynx_disable_irq(struct irq_data *d)
{
unsigned long bit, mask;
bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@ -475,11 +475,11 @@ sable_lynx_disable_irq(unsigned int irq)
}
static void
sable_lynx_mask_and_ack_irq(unsigned int irq)
sable_lynx_mask_and_ack_irq(struct irq_data *d)
{
unsigned long bit, mask;
bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
@ -489,9 +489,9 @@ sable_lynx_mask_and_ack_irq(unsigned int irq)
static struct irq_chip sable_lynx_irq_type = {
.name = "SABLE/LYNX",
.unmask = sable_lynx_enable_irq,
.mask = sable_lynx_disable_irq,
.mask_ack = sable_lynx_mask_and_ack_irq,
.irq_unmask = sable_lynx_enable_irq,
.irq_mask = sable_lynx_disable_irq,
.irq_mask_ack = sable_lynx_mask_and_ack_irq,
};
static void
@ -518,9 +518,9 @@ sable_lynx_init_irq(int nr_of_irqs)
long i;
for (i = 0; i < nr_of_irqs; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &sable_lynx_irq_type,
handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
common_init_isa_dma();

Some files were not shown because too many files have changed in this diff Show More