regulator: pv88080: new regulator driver
This is the driver for the Powerventure PV88080 BUCKs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <James.Ban..opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
James Ban
Mark Brown
parent
f55532a0c0
commit
99cf3af5e2
49
Documentation/devicetree/bindings/regulator/pv88080.txt
Normal file
49
Documentation/devicetree/bindings/regulator/pv88080.txt
Normal file
@ -0,0 +1,49 @@
|
|||||||
|
* Powerventure Semiconductor PV88080 Voltage Regulator
|
||||||
|
|
||||||
|
Required properties:
|
||||||
|
- compatible: "pvs,pv88080".
|
||||||
|
- reg: I2C slave address, usually 0x49.
|
||||||
|
- interrupts: the interrupt outputs of the controller
|
||||||
|
- regulators: A node that houses a sub-node for each regulator within the
|
||||||
|
device. Each sub-node is identified using the node's name, with valid
|
||||||
|
values listed below. The content of each sub-node is defined by the
|
||||||
|
standard binding for regulators; see regulator.txt.
|
||||||
|
BUCK1, BUCK2, and BUCK3.
|
||||||
|
|
||||||
|
Optional properties:
|
||||||
|
- Any optional property defined in regulator.txt
|
||||||
|
|
||||||
|
Example
|
||||||
|
|
||||||
|
pmic: pv88080@49 {
|
||||||
|
compatible = "pvs,pv88080";
|
||||||
|
reg = <0x49>;
|
||||||
|
interrupt-parent = <&gpio>;
|
||||||
|
interrupts = <24 24>;
|
||||||
|
|
||||||
|
regulators {
|
||||||
|
BUCK1 {
|
||||||
|
regulator-name = "buck1";
|
||||||
|
regulator-min-microvolt = < 600000>;
|
||||||
|
regulator-max-microvolt = <1393750>;
|
||||||
|
regulator-min-microamp = < 220000>;
|
||||||
|
regulator-max-microamp = <7040000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
BUCK2 {
|
||||||
|
regulator-name = "buck2";
|
||||||
|
regulator-min-microvolt = < 600000>;
|
||||||
|
regulator-max-microvolt = <1393750>;
|
||||||
|
regulator-min-microamp = <1496000>;
|
||||||
|
regulator-max-microamp = <4189000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
BUCK3 {
|
||||||
|
regulator-name = "buck3";
|
||||||
|
regulator-min-microvolt = <1400000>;
|
||||||
|
regulator-max-microvolt = <2193750>;
|
||||||
|
regulator-min-microamp = <1496000>;
|
||||||
|
regulator-max-microamp = <4189000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
@ -548,6 +548,13 @@ config REGULATOR_PV88060
|
|||||||
Say y here to support the voltage regulators and convertors
|
Say y here to support the voltage regulators and convertors
|
||||||
PV88060
|
PV88060
|
||||||
|
|
||||||
|
config REGULATOR_PV88080
|
||||||
|
tristate "Powerventure Semiconductor PV88080 regulator"
|
||||||
|
depends on I2C
|
||||||
|
select REGMAP_I2C
|
||||||
|
help
|
||||||
|
Say y here to support the buck convertors on PV88080
|
||||||
|
|
||||||
config REGULATOR_PV88090
|
config REGULATOR_PV88090
|
||||||
tristate "Powerventure Semiconductor PV88090 regulator"
|
tristate "Powerventure Semiconductor PV88090 regulator"
|
||||||
depends on I2C
|
depends on I2C
|
||||||
|
|||||||
@ -71,6 +71,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
|
|||||||
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
|
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
|
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
|
obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
|
||||||
|
obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_PV88090) += pv88090-regulator.o
|
obj-$(CONFIG_REGULATOR_PV88090) += pv88090-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
|
obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
|
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
|
||||||
|
|||||||
419
drivers/regulator/pv88080-regulator.c
Normal file
419
drivers/regulator/pv88080-regulator.c
Normal file
@ -0,0 +1,419 @@
|
|||||||
|
/*
|
||||||
|
* pv88080-regulator.c - Regulator device driver for PV88080
|
||||||
|
* Copyright (C) 2016 Powerventure Semiconductor Ltd.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License
|
||||||
|
* as published by the Free Software Foundation; either version 2
|
||||||
|
* of the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/err.h>
|
||||||
|
#include <linux/gpio.h>
|
||||||
|
#include <linux/i2c.h>
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/slab.h>
|
||||||
|
#include <linux/regulator/driver.h>
|
||||||
|
#include <linux/regulator/machine.h>
|
||||||
|
#include <linux/regmap.h>
|
||||||
|
#include <linux/irq.h>
|
||||||
|
#include <linux/interrupt.h>
|
||||||
|
#include <linux/regulator/of_regulator.h>
|
||||||
|
#include <linux/proc_fs.h>
|
||||||
|
#include <linux/uaccess.h>
|
||||||
|
#include "pv88080-regulator.h"
|
||||||
|
|
||||||
|
#define PV88080_MAX_REGULATORS 3
|
||||||
|
|
||||||
|
/* PV88080 REGULATOR IDs */
|
||||||
|
enum {
|
||||||
|
/* BUCKs */
|
||||||
|
PV88080_ID_BUCK1,
|
||||||
|
PV88080_ID_BUCK2,
|
||||||
|
PV88080_ID_BUCK3,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct pv88080_regulator {
|
||||||
|
struct regulator_desc desc;
|
||||||
|
/* Current limiting */
|
||||||
|
unsigned int n_current_limits;
|
||||||
|
const int *current_limits;
|
||||||
|
unsigned int limit_mask;
|
||||||
|
unsigned int conf;
|
||||||
|
unsigned int conf2;
|
||||||
|
unsigned int conf5;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct pv88080 {
|
||||||
|
struct device *dev;
|
||||||
|
struct regmap *regmap;
|
||||||
|
struct regulator_dev *rdev[PV88080_MAX_REGULATORS];
|
||||||
|
};
|
||||||
|
|
||||||
|
struct pv88080_buck_voltage {
|
||||||
|
int min_uV;
|
||||||
|
int max_uV;
|
||||||
|
int uV_step;
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct regmap_config pv88080_regmap_config = {
|
||||||
|
.reg_bits = 8,
|
||||||
|
.val_bits = 8,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Current limits array (in uA) for BUCK1, BUCK2, BUCK3.
|
||||||
|
* Entry indexes corresponds to register values.
|
||||||
|
*/
|
||||||
|
|
||||||
|
static const int pv88080_buck1_limits[] = {
|
||||||
|
3230000, 5130000, 6960000, 8790000
|
||||||
|
};
|
||||||
|
|
||||||
|
static const int pv88080_buck23_limits[] = {
|
||||||
|
1496000, 2393000, 3291000, 4189000
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pv88080_buck_voltage pv88080_buck_vol[2] = {
|
||||||
|
{
|
||||||
|
.min_uV = 600000,
|
||||||
|
.max_uV = 1393750,
|
||||||
|
.uV_step = 6250,
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.min_uV = 1400000,
|
||||||
|
.max_uV = 2193750,
|
||||||
|
.uV_step = 6250,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static unsigned int pv88080_buck_get_mode(struct regulator_dev *rdev)
|
||||||
|
{
|
||||||
|
struct pv88080_regulator *info = rdev_get_drvdata(rdev);
|
||||||
|
unsigned int data;
|
||||||
|
int ret, mode = 0;
|
||||||
|
|
||||||
|
ret = regmap_read(rdev->regmap, info->conf, &data);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
switch (data & PV88080_BUCK1_MODE_MASK) {
|
||||||
|
case PV88080_BUCK_MODE_SYNC:
|
||||||
|
mode = REGULATOR_MODE_FAST;
|
||||||
|
break;
|
||||||
|
case PV88080_BUCK_MODE_AUTO:
|
||||||
|
mode = REGULATOR_MODE_NORMAL;
|
||||||
|
break;
|
||||||
|
case PV88080_BUCK_MODE_SLEEP:
|
||||||
|
mode = REGULATOR_MODE_STANDBY;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
return mode;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int pv88080_buck_set_mode(struct regulator_dev *rdev,
|
||||||
|
unsigned int mode)
|
||||||
|
{
|
||||||
|
struct pv88080_regulator *info = rdev_get_drvdata(rdev);
|
||||||
|
int val = 0;
|
||||||
|
|
||||||
|
switch (mode) {
|
||||||
|
case REGULATOR_MODE_FAST:
|
||||||
|
val = PV88080_BUCK_MODE_SYNC;
|
||||||
|
break;
|
||||||
|
case REGULATOR_MODE_NORMAL:
|
||||||
|
val = PV88080_BUCK_MODE_AUTO;
|
||||||
|
break;
|
||||||
|
case REGULATOR_MODE_STANDBY:
|
||||||
|
val = PV88080_BUCK_MODE_SLEEP;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
return regmap_update_bits(rdev->regmap, info->conf,
|
||||||
|
PV88080_BUCK1_MODE_MASK, val);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int pv88080_set_current_limit(struct regulator_dev *rdev, int min,
|
||||||
|
int max)
|
||||||
|
{
|
||||||
|
struct pv88080_regulator *info = rdev_get_drvdata(rdev);
|
||||||
|
int i;
|
||||||
|
|
||||||
|
/* search for closest to maximum */
|
||||||
|
for (i = info->n_current_limits; i >= 0; i--) {
|
||||||
|
if (min <= info->current_limits[i]
|
||||||
|
&& max >= info->current_limits[i]) {
|
||||||
|
return regmap_update_bits(rdev->regmap,
|
||||||
|
info->conf,
|
||||||
|
info->limit_mask,
|
||||||
|
i << PV88080_BUCK1_ILIM_SHIFT);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int pv88080_get_current_limit(struct regulator_dev *rdev)
|
||||||
|
{
|
||||||
|
struct pv88080_regulator *info = rdev_get_drvdata(rdev);
|
||||||
|
unsigned int data;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = regmap_read(rdev->regmap, info->conf, &data);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
data = (data & info->limit_mask) >> PV88080_BUCK1_ILIM_SHIFT;
|
||||||
|
return info->current_limits[data];
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct regulator_ops pv88080_buck_ops = {
|
||||||
|
.get_mode = pv88080_buck_get_mode,
|
||||||
|
.set_mode = pv88080_buck_set_mode,
|
||||||
|
.enable = regulator_enable_regmap,
|
||||||
|
.disable = regulator_disable_regmap,
|
||||||
|
.is_enabled = regulator_is_enabled_regmap,
|
||||||
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||||
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||||
|
.list_voltage = regulator_list_voltage_linear,
|
||||||
|
.set_current_limit = pv88080_set_current_limit,
|
||||||
|
.get_current_limit = pv88080_get_current_limit,
|
||||||
|
};
|
||||||
|
|
||||||
|
#define PV88080_BUCK(chip, regl_name, min, step, max, limits_array) \
|
||||||
|
{\
|
||||||
|
.desc = {\
|
||||||
|
.id = chip##_ID_##regl_name,\
|
||||||
|
.name = __stringify(chip##_##regl_name),\
|
||||||
|
.of_match = of_match_ptr(#regl_name),\
|
||||||
|
.regulators_node = of_match_ptr("regulators"),\
|
||||||
|
.type = REGULATOR_VOLTAGE,\
|
||||||
|
.owner = THIS_MODULE,\
|
||||||
|
.ops = &pv88080_buck_ops,\
|
||||||
|
.min_uV = min, \
|
||||||
|
.uV_step = step, \
|
||||||
|
.n_voltages = ((max) - (min))/(step) + 1, \
|
||||||
|
.enable_reg = PV88080_REG_##regl_name##_CONF0, \
|
||||||
|
.enable_mask = PV88080_##regl_name##_EN, \
|
||||||
|
.vsel_reg = PV88080_REG_##regl_name##_CONF0, \
|
||||||
|
.vsel_mask = PV88080_V##regl_name##_MASK, \
|
||||||
|
},\
|
||||||
|
.current_limits = limits_array, \
|
||||||
|
.n_current_limits = ARRAY_SIZE(limits_array), \
|
||||||
|
.limit_mask = PV88080_##regl_name##_ILIM_MASK, \
|
||||||
|
.conf = PV88080_REG_##regl_name##_CONF1, \
|
||||||
|
.conf2 = PV88080_REG_##regl_name##_CONF2, \
|
||||||
|
.conf5 = PV88080_REG_##regl_name##_CONF5, \
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pv88080_regulator pv88080_regulator_info[] = {
|
||||||
|
PV88080_BUCK(PV88080, BUCK1, 600000, 6250, 1393750,
|
||||||
|
pv88080_buck1_limits),
|
||||||
|
PV88080_BUCK(PV88080, BUCK2, 600000, 6250, 1393750,
|
||||||
|
pv88080_buck23_limits),
|
||||||
|
PV88080_BUCK(PV88080, BUCK3, 600000, 6250, 1393750,
|
||||||
|
pv88080_buck23_limits),
|
||||||
|
};
|
||||||
|
|
||||||
|
static irqreturn_t pv88080_irq_handler(int irq, void *data)
|
||||||
|
{
|
||||||
|
struct pv88080 *chip = data;
|
||||||
|
int i, reg_val, err, ret = IRQ_NONE;
|
||||||
|
|
||||||
|
err = regmap_read(chip->regmap, PV88080_REG_EVENT_A, ®_val);
|
||||||
|
if (err < 0)
|
||||||
|
goto error_i2c;
|
||||||
|
|
||||||
|
if (reg_val & PV88080_E_VDD_FLT) {
|
||||||
|
for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
|
||||||
|
if (chip->rdev[i] != NULL) {
|
||||||
|
regulator_notifier_call_chain(chip->rdev[i],
|
||||||
|
REGULATOR_EVENT_UNDER_VOLTAGE,
|
||||||
|
NULL);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
err = regmap_write(chip->regmap, PV88080_REG_EVENT_A,
|
||||||
|
PV88080_E_VDD_FLT);
|
||||||
|
if (err < 0)
|
||||||
|
goto error_i2c;
|
||||||
|
|
||||||
|
ret = IRQ_HANDLED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (reg_val & PV88080_E_OVER_TEMP) {
|
||||||
|
for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
|
||||||
|
if (chip->rdev[i] != NULL) {
|
||||||
|
regulator_notifier_call_chain(chip->rdev[i],
|
||||||
|
REGULATOR_EVENT_OVER_TEMP,
|
||||||
|
NULL);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
err = regmap_write(chip->regmap, PV88080_REG_EVENT_A,
|
||||||
|
PV88080_E_OVER_TEMP);
|
||||||
|
if (err < 0)
|
||||||
|
goto error_i2c;
|
||||||
|
|
||||||
|
ret = IRQ_HANDLED;
|
||||||
|
}
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
error_i2c:
|
||||||
|
dev_err(chip->dev, "I2C error : %d\n", err);
|
||||||
|
return IRQ_NONE;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* I2C driver interface functions
|
||||||
|
*/
|
||||||
|
static int pv88080_i2c_probe(struct i2c_client *i2c,
|
||||||
|
const struct i2c_device_id *id)
|
||||||
|
{
|
||||||
|
struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
|
||||||
|
struct pv88080 *chip;
|
||||||
|
struct regulator_config config = { };
|
||||||
|
int i, error, ret;
|
||||||
|
unsigned int conf2, conf5;
|
||||||
|
|
||||||
|
chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88080), GFP_KERNEL);
|
||||||
|
if (!chip)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
chip->dev = &i2c->dev;
|
||||||
|
chip->regmap = devm_regmap_init_i2c(i2c, &pv88080_regmap_config);
|
||||||
|
if (IS_ERR(chip->regmap)) {
|
||||||
|
error = PTR_ERR(chip->regmap);
|
||||||
|
dev_err(chip->dev, "Failed to allocate register map: %d\n",
|
||||||
|
error);
|
||||||
|
return error;
|
||||||
|
}
|
||||||
|
|
||||||
|
i2c_set_clientdata(i2c, chip);
|
||||||
|
|
||||||
|
if (i2c->irq != 0) {
|
||||||
|
ret = regmap_write(chip->regmap, PV88080_REG_MASK_A, 0xFF);
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_err(chip->dev,
|
||||||
|
"Failed to mask A reg: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
ret = regmap_write(chip->regmap, PV88080_REG_MASK_B, 0xFF);
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_err(chip->dev,
|
||||||
|
"Failed to mask B reg: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
ret = regmap_write(chip->regmap, PV88080_REG_MASK_C, 0xFF);
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_err(chip->dev,
|
||||||
|
"Failed to mask C reg: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
|
||||||
|
pv88080_irq_handler,
|
||||||
|
IRQF_TRIGGER_LOW|IRQF_ONESHOT,
|
||||||
|
"pv88080", chip);
|
||||||
|
if (ret != 0) {
|
||||||
|
dev_err(chip->dev, "Failed to request IRQ: %d\n",
|
||||||
|
i2c->irq);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = regmap_update_bits(chip->regmap, PV88080_REG_MASK_A,
|
||||||
|
PV88080_M_VDD_FLT | PV88080_M_OVER_TEMP, 0);
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_err(chip->dev,
|
||||||
|
"Failed to update mask reg: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
} else {
|
||||||
|
dev_warn(chip->dev, "No IRQ configured\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
config.dev = chip->dev;
|
||||||
|
config.regmap = chip->regmap;
|
||||||
|
|
||||||
|
for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
|
||||||
|
if (init_data)
|
||||||
|
config.init_data = &init_data[i];
|
||||||
|
|
||||||
|
ret = regmap_read(chip->regmap,
|
||||||
|
pv88080_regulator_info[i].conf2, &conf2);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
conf2 = ((conf2 >> PV88080_BUCK_VDAC_RANGE_SHIFT) &
|
||||||
|
PV88080_BUCK_VDAC_RANGE_MASK);
|
||||||
|
|
||||||
|
ret = regmap_read(chip->regmap,
|
||||||
|
pv88080_regulator_info[i].conf5, &conf5);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
conf5 = ((conf5 >> PV88080_BUCK_VRANGE_GAIN_SHIFT) &
|
||||||
|
PV88080_BUCK_VRANGE_GAIN_MASK);
|
||||||
|
|
||||||
|
pv88080_regulator_info[i].desc.min_uV =
|
||||||
|
pv88080_buck_vol[conf2].min_uV * (conf5+1);
|
||||||
|
pv88080_regulator_info[i].desc.uV_step =
|
||||||
|
pv88080_buck_vol[conf2].uV_step * (conf5+1);
|
||||||
|
pv88080_regulator_info[i].desc.n_voltages =
|
||||||
|
((pv88080_buck_vol[conf2].max_uV * (conf5+1))
|
||||||
|
- (pv88080_regulator_info[i].desc.min_uV))
|
||||||
|
/(pv88080_regulator_info[i].desc.uV_step) + 1;
|
||||||
|
|
||||||
|
config.driver_data = (void *)&pv88080_regulator_info[i];
|
||||||
|
chip->rdev[i] = devm_regulator_register(chip->dev,
|
||||||
|
&pv88080_regulator_info[i].desc, &config);
|
||||||
|
if (IS_ERR(chip->rdev[i])) {
|
||||||
|
dev_err(chip->dev,
|
||||||
|
"Failed to register PV88080 regulator\n");
|
||||||
|
return PTR_ERR(chip->rdev[i]);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct i2c_device_id pv88080_i2c_id[] = {
|
||||||
|
{"pv88080", 0},
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(i2c, pv88080_i2c_id);
|
||||||
|
|
||||||
|
#ifdef CONFIG_OF
|
||||||
|
static const struct of_device_id pv88080_dt_ids[] = {
|
||||||
|
{ .compatible = "pvs,pv88080", .data = &pv88080_i2c_id[0] },
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, pv88080_dt_ids);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
static struct i2c_driver pv88080_regulator_driver = {
|
||||||
|
.driver = {
|
||||||
|
.name = "pv88080",
|
||||||
|
.of_match_table = of_match_ptr(pv88080_dt_ids),
|
||||||
|
},
|
||||||
|
.probe = pv88080_i2c_probe,
|
||||||
|
.id_table = pv88080_i2c_id,
|
||||||
|
};
|
||||||
|
|
||||||
|
module_i2c_driver(pv88080_regulator_driver);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
|
||||||
|
MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88080");
|
||||||
|
MODULE_LICENSE("GPL");
|
||||||
92
drivers/regulator/pv88080-regulator.h
Normal file
92
drivers/regulator/pv88080-regulator.h
Normal file
@ -0,0 +1,92 @@
|
|||||||
|
/*
|
||||||
|
* pv88080-regulator.h - Regulator definitions for PV88080
|
||||||
|
* Copyright (C) 2016 Powerventure Semiconductor Ltd.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License
|
||||||
|
* as published by the Free Software Foundation; either version 2
|
||||||
|
* of the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __PV88080_REGISTERS_H__
|
||||||
|
#define __PV88080_REGISTERS_H__
|
||||||
|
|
||||||
|
/* System Control and Event Registers */
|
||||||
|
#define PV88080_REG_EVENT_A 0x04
|
||||||
|
#define PV88080_REG_MASK_A 0x09
|
||||||
|
#define PV88080_REG_MASK_B 0x0a
|
||||||
|
#define PV88080_REG_MASK_C 0x0b
|
||||||
|
|
||||||
|
/* Regulator Registers */
|
||||||
|
#define PV88080_REG_BUCK1_CONF0 0x27
|
||||||
|
#define PV88080_REG_BUCK1_CONF1 0x28
|
||||||
|
#define PV88080_REG_BUCK1_CONF2 0x59
|
||||||
|
#define PV88080_REG_BUCK1_CONF5 0x5c
|
||||||
|
#define PV88080_REG_BUCK2_CONF0 0x29
|
||||||
|
#define PV88080_REG_BUCK2_CONF1 0x2a
|
||||||
|
#define PV88080_REG_BUCK2_CONF2 0x61
|
||||||
|
#define PV88080_REG_BUCK2_CONF5 0x64
|
||||||
|
#define PV88080_REG_BUCK3_CONF0 0x2b
|
||||||
|
#define PV88080_REG_BUCK3_CONF1 0x2c
|
||||||
|
#define PV88080_REG_BUCK3_CONF2 0x69
|
||||||
|
#define PV88080_REG_BUCK3_CONF5 0x6c
|
||||||
|
|
||||||
|
/* PV88080_REG_EVENT_A (addr=0x04) */
|
||||||
|
#define PV88080_E_VDD_FLT 0x01
|
||||||
|
#define PV88080_E_OVER_TEMP 0x02
|
||||||
|
|
||||||
|
/* PV88080_REG_MASK_A (addr=0x09) */
|
||||||
|
#define PV88080_M_VDD_FLT 0x01
|
||||||
|
#define PV88080_M_OVER_TEMP 0x02
|
||||||
|
|
||||||
|
/* PV88080_REG_BUCK1_CONF0 (addr=0x27) */
|
||||||
|
#define PV88080_BUCK1_EN 0x80
|
||||||
|
#define PV88080_VBUCK1_MASK 0x7F
|
||||||
|
/* PV88080_REG_BUCK2_CONF0 (addr=0x29) */
|
||||||
|
#define PV88080_BUCK2_EN 0x80
|
||||||
|
#define PV88080_VBUCK2_MASK 0x7F
|
||||||
|
/* PV88080_REG_BUCK3_CONF0 (addr=0x2b) */
|
||||||
|
#define PV88080_BUCK3_EN 0x80
|
||||||
|
#define PV88080_VBUCK3_MASK 0x7F
|
||||||
|
|
||||||
|
/* PV88080_REG_BUCK1_CONF1 (addr=0x28) */
|
||||||
|
#define PV88080_BUCK1_ILIM_SHIFT 2
|
||||||
|
#define PV88080_BUCK1_ILIM_MASK 0x0C
|
||||||
|
#define PV88080_BUCK1_MODE_MASK 0x03
|
||||||
|
|
||||||
|
/* PV88080_REG_BUCK2_CONF1 (addr=0x2a) */
|
||||||
|
#define PV88080_BUCK2_ILIM_SHIFT 2
|
||||||
|
#define PV88080_BUCK2_ILIM_MASK 0x0C
|
||||||
|
#define PV88080_BUCK2_MODE_MASK 0x03
|
||||||
|
|
||||||
|
/* PV88080_REG_BUCK3_CONF1 (addr=0x2c) */
|
||||||
|
#define PV88080_BUCK3_ILIM_SHIFT 2
|
||||||
|
#define PV88080_BUCK3_ILIM_MASK 0x0C
|
||||||
|
#define PV88080_BUCK3_MODE_MASK 0x03
|
||||||
|
|
||||||
|
#define PV88080_BUCK_MODE_SLEEP 0x00
|
||||||
|
#define PV88080_BUCK_MODE_AUTO 0x01
|
||||||
|
#define PV88080_BUCK_MODE_SYNC 0x02
|
||||||
|
|
||||||
|
/* PV88080_REG_BUCK2_CONF2 (addr=0x61) */
|
||||||
|
/* PV88080_REG_BUCK3_CONF2 (addr=0x69) */
|
||||||
|
#define PV88080_BUCK_VDAC_RANGE_SHIFT 7
|
||||||
|
#define PV88080_BUCK_VDAC_RANGE_MASK 0x01
|
||||||
|
|
||||||
|
#define PV88080_BUCK_VDAC_RANGE_1 0x00
|
||||||
|
#define PV88080_BUCK_VDAC_RANGE_2 0x01
|
||||||
|
|
||||||
|
/* PV88080_REG_BUCK2_CONF5 (addr=0x64) */
|
||||||
|
/* PV88080_REG_BUCK3_CONF5 (addr=0x6c) */
|
||||||
|
#define PV88080_BUCK_VRANGE_GAIN_SHIFT 0
|
||||||
|
#define PV88080_BUCK_VRANGE_GAIN_MASK 0x01
|
||||||
|
|
||||||
|
#define PV88080_BUCK_VRANGE_GAIN_1 0x00
|
||||||
|
#define PV88080_BUCK_VRANGE_GAIN_2 0x01
|
||||||
|
|
||||||
|
#endif /* __PV88080_REGISTERS_H__ */
|
||||||
Loading…
Reference in New Issue
Block a user