m68k: mcf5441x: add support for esdhc mmc controller

Add support for sdhci-edshc mmc controller.

Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/r/20200518191742.1251440-1-angelo.dureghello@timesys.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

arch/m68k/coldfire/clk.c

@@ -73,6 +73,21 @@ struct clk_ops clk_ops1 = {
 #endif /* MCFPM_PPMCR1 */
 #endif /* MCFPM_PPMCR0 */
 
+static void __clk_enable2(struct clk *clk)
+{
+	__raw_writel(__raw_readl(MCFSDHC_CLK) | (1 << clk->slot), MCFSDHC_CLK);
+}
+
+static void __clk_disable2(struct clk *clk)
+{
+	__raw_writel(__raw_readl(MCFSDHC_CLK) & ~(1 << clk->slot), MCFSDHC_CLK);
+}
+
+struct clk_ops clk_ops2 = {
+	.enable		= __clk_enable2,
+	.disable	= __clk_disable2,
+};
+
 struct clk *clk_get(struct device *dev, const char *id)
 {
 	const char *clk_name = dev ? dev_name(dev) : id ? id : NULL;

arch/m68k/coldfire/device.c

@@ -22,6 +22,7 @@
 #include <asm/mcfqspi.h>
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/dma-mcf-edma.h>
+#include <linux/platform_data/mmc-esdhc-mcf.h>
 
 /*
  *	All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
@@ -551,9 +552,35 @@ static struct platform_device mcf_edma = {
 		.platform_data = &mcf_edma_data,
 	}
 };
-
 #endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
 
+#if IS_ENABLED(CONFIG_MMC)
+static struct mcf_esdhc_platform_data mcf_esdhc_data = {
+	.max_bus_width = 4,
+	.cd_type = ESDHC_CD_NONE,
+};
+
+static struct resource mcf_esdhc_resources[] = {
+	{
+		.start = MCFSDHC_BASE,
+		.end = MCFSDHC_BASE + MCFSDHC_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MCF_IRQ_SDHC,
+		.end = MCF_IRQ_SDHC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_esdhc = {
+	.name			= "sdhci-esdhc-mcf",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(mcf_esdhc_resources),
+	.resource		= mcf_esdhc_resources,
+	.dev.platform_data	= &mcf_esdhc_data,
+};
+#endif /* IS_ENABLED(CONFIG_MMC) */
+
 static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_uart,
 #if IS_ENABLED(CONFIG_FEC)
@@ -586,6 +613,9 @@ static struct platform_device *mcf_devices[] __initdata = {
 #if IS_ENABLED(CONFIG_MCF_EDMA)
 	&mcf_edma,
 #endif
+#if IS_ENABLED(CONFIG_MMC)
+	&mcf_esdhc,
+#endif
 };
 
 /*
@@ -614,4 +644,3 @@ static int __init mcf_init_devices(void)
 }
 
 arch_initcall(mcf_init_devices);
-

arch/m68k/coldfire/m5441x.c

@@ -52,7 +52,7 @@ DEFINE_CLK(0, "mcfssi.0", 47, MCF_CLK);
 DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
 DEFINE_CLK(0, "mcfrng.0", 49, MCF_CLK);
 DEFINE_CLK(0, "mcfssi.1", 50, MCF_CLK);
-DEFINE_CLK(0, "mcfsdhc.0", 51, MCF_CLK);
+DEFINE_CLK(0, "sdhci-esdhc-mcf.0", 51, MCF_CLK);
 DEFINE_CLK(0, "enet-fec.0", 53, MCF_CLK);
 DEFINE_CLK(0, "enet-fec.1", 54, MCF_CLK);
 DEFINE_CLK(0, "switch.0", 55, MCF_CLK);
@@ -74,6 +74,10 @@ DEFINE_CLK(1, "mcfpwm.0", 34, MCF_BUSCLK);
 DEFINE_CLK(1, "sys.0", 36, MCF_BUSCLK);
 DEFINE_CLK(1, "gpio.0", 37, MCF_BUSCLK);
 
+DEFINE_CLK(2, "ipg.0", 0, MCF_CLK);
+DEFINE_CLK(2, "ahb.0", 1, MCF_CLK);
+DEFINE_CLK(2, "per.0", 2, MCF_CLK);
+
 struct clk *mcf_clks[] = {
 	&__clk_0_2,
 	&__clk_0_8,
@@ -131,6 +135,11 @@ struct clk *mcf_clks[] = {
 	&__clk_1_34,
 	&__clk_1_36,
 	&__clk_1_37,
+
+	&__clk_2_0,
+	&__clk_2_1,
+	&__clk_2_2,
+
 	NULL,
 };
 
@@ -151,6 +160,7 @@ static struct clk * const enable_clks[] __initconst = {
 	&__clk_0_33, /* pit.1 */
 	&__clk_0_37, /* eport */
 	&__clk_0_48, /* pll */
+	&__clk_0_51, /* esdhc */
 
 	&__clk_1_36, /* CCM/reset module/Power management */
 	&__clk_1_37, /* gpio */

arch/m68k/include/asm/m5441xsim.h

@@ -278,6 +278,13 @@
 #define MCFGPIO_IRQ_VECBASE	(MCFINT_VECBASE - MCFGPIO_IRQ_MIN)
 #define MCFGPIO_PIN_MAX		87
 
+/*
+ * Phase Locked Loop (PLL)
+ */
+#define MCF_PLL_CR		0xFC0C0000
+#define MCF_PLL_DR		0xFC0C0004
+#define MCF_PLL_SR		0xFC0C0008
+
 /*
  *  DSPI module.
  */
@@ -298,5 +305,13 @@
 #define MCFEDMA_IRQ_INTR16	(MCFINT1_VECBASE + MCFEDMA_EDMA_INTR16)
 #define MCFEDMA_IRQ_INTR56	(MCFINT2_VECBASE + MCFEDMA_EDMA_INTR56)
 #define MCFEDMA_IRQ_ERR	(MCFINT0_VECBASE + MCFINT0_EDMA_ERR)
+/*
+ *  esdhc module.
+ */
+#define MCFSDHC_BASE		0xfc0cc000
+#define MCFSDHC_SIZE		256
+#define MCFINT2_SDHC		31
+#define MCF_IRQ_SDHC		(MCFINT2_VECBASE + MCFINT2_SDHC)
+#define MCFSDHC_CLK		(MCFSDHC_BASE + 0x2c)
 
 #endif /* m5441xsim_h */

arch/m68k/include/asm/mcfclk.h

@@ -30,6 +30,8 @@ extern struct clk_ops clk_ops0;
 extern struct clk_ops clk_ops1;
 #endif /* MCFPM_PPMCR1 */
 
+extern struct clk_ops clk_ops2;
+
 #define DEFINE_CLK(clk_bank, clk_name, clk_slot, clk_rate) \
 static struct clk __clk_##clk_bank##_##clk_slot = { \
 	.name = clk_name, \

include/linux/platform_data/mmc-esdhc-mcf.h

@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LINUX_PLATFORM_DATA_MCF_ESDHC_H__
+#define __LINUX_PLATFORM_DATA_MCF_ESDHC_H__
+
+enum cd_types {
+	ESDHC_CD_NONE,		/* no CD, neither controller nor gpio */
+	ESDHC_CD_CONTROLLER,	/* mmc controller internal CD */
+	ESDHC_CD_PERMANENT,	/* no CD, card permanently wired to host */
+};
+
+struct mcf_esdhc_platform_data {
+	int max_bus_width;
+	int cd_type;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_MCF_ESDHC_H__ */