Merge branch 'master' of /home/src/linux-2.6/

arch/arm/common/locomo.c

@@ -22,7 +22,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 

arch/arm/common/sa1111.c

@@ -22,7 +22,7 @@
 #include <linux/ptrace.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/dma-mapping.h>

arch/arm/common/scoop.c

@@ -13,8 +13,7 @@
 
 #include <linux/device.h>
 #include <linux/string.h>
-#include <linux/slab.h>
-
+#include <linux/platform_device.h>
 #include <asm/io.h>
 #include <asm/hardware/scoop.h>
 

arch/arm/mach-aaec2000/core.c

@@ -13,7 +13,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/dma-mapping.h>

arch/arm/mach-h720x/h7202-eval.c

@@ -18,7 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/string.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/setup.h>
 #include <asm/types.h>

arch/arm/mach-imx/generic.c

@@ -22,7 +22,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>

arch/arm/mach-imx/mx1ads.c

@@ -14,6 +14,7 @@
 
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/system.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>

arch/arm/mach-integrator/integrator_ap.c

@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/list.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sysdev.h>

arch/arm/mach-integrator/integrator_cp.c

@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/list.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/string.h>

arch/arm/mach-iop3xx/iop321-setup.c

@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/major.h>
 #include <linux/fs.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>

arch/arm/mach-iop3xx/iop331-setup.c

@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/major.h>
 #include <linux/fs.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>

arch/arm/mach-ixp2000/enp2611.c

@@ -32,7 +32,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>

arch/arm/mach-ixp2000/ixdp2x00.c

@@ -20,7 +20,7 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>

arch/arm/mach-ixp2000/ixdp2x01.c

@@ -29,7 +29,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>

arch/arm/mach-ixp4xx/common.c

@@ -20,6 +20,7 @@
 #include <linux/serial.h>
 #include <linux/sched.h>
 #include <linux/tty.h>
+#include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/bootmem.h>
 #include <linux/interrupt.h>

arch/arm/mach-lh7a40x/arch-lpd7a40x.c

@@ -10,7 +10,7 @@
 
 #include <linux/tty.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
 
 #include <asm/hardware.h>

arch/arm/mach-omap1/board-h2.c

@@ -21,7 +21,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>

arch/arm/mach-omap1/board-h3.c

@@ -19,7 +19,7 @@
 #include <linux/init.h>
 #include <linux/major.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/errno.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>

arch/arm/mach-omap1/board-innovator.c

@@ -18,7 +18,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>

arch/arm/mach-omap1/board-netstar.c

@@ -11,7 +11,7 @@
  */
 
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/kernel.h>

arch/arm/mach-omap1/board-osk.c

@@ -28,7 +28,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
 
 #include <linux/mtd/mtd.h>

arch/arm/mach-omap1/board-perseus2.c

@@ -13,7 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>

arch/arm/mach-omap1/board-voiceblue.c

@@ -13,7 +13,7 @@
  */
 
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/kernel.h>

arch/arm/mach-omap1/devices.c

@@ -13,7 +13,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>

arch/arm/mach-pxa/corgi.c

@@ -14,7 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>

arch/arm/mach-pxa/corgi_lcd.c

@@ -17,7 +17,7 @@
 
 #include <linux/delay.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/module.h>
 #include <asm/arch/akita.h>
 #include <asm/arch/corgi.h>

arch/arm/mach-pxa/corgi_ssp.c

@@ -15,7 +15,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 

arch/arm/mach-pxa/generic.c

@@ -20,7 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <linux/pm.h>
 #include <linux/string.h>

arch/arm/mach-pxa/idp.c

@@ -18,7 +18,7 @@
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/fb.h>
 
 #include <asm/setup.h>

arch/arm/mach-pxa/lubbock.c

@@ -14,7 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/major.h>
 #include <linux/fb.h>

arch/arm/mach-pxa/mainstone.c

@@ -14,7 +14,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>

arch/arm/mach-pxa/poodle.c

@@ -16,7 +16,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/fb.h>
 
 #include <asm/hardware.h>

arch/arm/mach-pxa/pxa27x.c

@@ -16,7 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pm.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>

arch/arm/mach-pxa/spitz.c

@@ -14,7 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/major.h>
 #include <linux/fs.h>

arch/arm/mach-s3c2410/clock.c

@@ -32,7 +32,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
 #include <linux/interrupt.h>

arch/arm/mach-s3c2410/cpu.c

@@ -26,7 +26,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>

arch/arm/mach-s3c2410/devs.c

@@ -24,7 +24,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-s3c2410/devs.h

@@ -15,6 +15,7 @@
  *	10-Feb-2005 BJD	 Added camera from guillaume.gourat@nexvision.tv
 */
 #include <linux/config.h>
+#include <linux/platform_device.h>
 
 extern struct platform_device *s3c24xx_uart_devs[];
 

arch/arm/mach-s3c2410/mach-anubis.c

@@ -21,7 +21,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-s3c2410/mach-bast.c

@@ -41,7 +41,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/dm9000.h>
 
 #include <asm/mach/arch.h>

arch/arm/mach-s3c2410/mach-h1940.c

@@ -34,6 +34,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-s3c2410/mach-n30.c

@@ -20,7 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/kthread.h>
 
 #include <asm/mach/arch.h>

arch/arm/mach-s3c2410/mach-nexcoder.c

@@ -19,7 +19,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <linux/mtd/map.h>
 

arch/arm/mach-s3c2410/mach-otom.c

@@ -15,7 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-s3c2410/mach-rx3715.c

@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 

arch/arm/mach-s3c2410/mach-smdk2410.c

@@ -38,6 +38,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-s3c2410/mach-smdk2440.c

@@ -28,6 +28,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-s3c2410/s3c2410.c

@@ -27,7 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-s3c2410/s3c2440.c

@@ -26,7 +26,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>

arch/arm/mach-sa1100/badge4.c

@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/tty.h>
 #include <linux/mtd/mtd.h>

arch/arm/mach-sa1100/cerf.c

@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/tty.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 

arch/arm/mach-sa1100/collie.c

@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>

arch/arm/mach-sa1100/generic.c

@@ -18,6 +18,7 @@
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
 #include <linux/sched.h>	/* just for sched_clock() - funny that */
+#include <linux/platform_device.h>
 
 #include <asm/div64.h>
 #include <asm/hardware.h>

arch/arm/mach-sa1100/jornada720.c

@@ -6,7 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>

arch/arm/mach-sa1100/neponset.c

@@ -8,7 +8,7 @@
 #include <linux/tty.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 
 #include <asm/hardware.h>

arch/arm/mach-sa1100/pleb.c

@@ -6,7 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <linux/mtd/partitions.h>
 

arch/arm/mach-sa1100/simpad.c

@@ -10,7 +10,7 @@
 #include <linux/proc_fs.h>
 #include <linux/string.h> 
 #include <linux/pm.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 

arch/arm/mach-versatile/core.c

@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
 

arch/arm/plat-omap/usb.c

@@ -26,7 +26,7 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/usb_otg.h>
 
 #include <asm/io.h>

arch/i386/Kconfig

@@ -1042,8 +1042,3 @@ config X86_TRAMPOLINE
 	bool
 	depends on X86_SMP || (X86_VOYAGER && SMP)
 	default y
-
-config PC
-	bool
-	depends on X86 && !EMBEDDED
-	default y

arch/i386/kernel/apic.c

@@ -803,7 +803,6 @@ no_apic:
 
 void __init init_apic_mappings(void)
 {
-	unsigned int orig_apicid;
 	unsigned long apic_phys;
 
 	/*
@@ -825,11 +824,8 @@ void __init init_apic_mappings(void)
 	 * Fetch the APIC ID of the BSP in case we have a
 	 * default configuration (or the MP table is broken).
 	 */
-	orig_apicid = boot_cpu_physical_apicid;
-	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
-	if ((orig_apicid != -1U) && (orig_apicid != boot_cpu_physical_apicid))
-		printk(KERN_WARNING "Boot APIC ID in local APIC unexpected (%d vs %d)",
-			orig_apicid, boot_cpu_physical_apicid);
+	if (boot_cpu_physical_apicid == -1U)
+		boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
 
 #ifdef CONFIG_X86_IO_APIC
 	{
@@ -1259,81 +1255,40 @@ fastcall void smp_error_interrupt(struct pt_regs *regs)
 }
 
 /*
- * This initializes the IO-APIC and APIC hardware.
+ * This initializes the IO-APIC and APIC hardware if this is
+ * a UP kernel.
  */
-int __init APIC_init(void)
+int __init APIC_init_uniprocessor (void)
 {
-	if (enable_local_apic < 0) {
-		printk(KERN_INFO "APIC disabled\n");
-		return -1;
-	}
+	if (enable_local_apic < 0)
+		clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
 
-	/* See if we have a SMP configuration or have forced enabled
-	 * the local apic.
-	 */
-	if (!smp_found_config && !acpi_lapic && !cpu_has_apic) {
-		enable_local_apic = -1;
+	if (!smp_found_config && !cpu_has_apic)
 		return -1;
-	}
 
 	/*
-	 * Complain if the BIOS pretends there is an apic.
-	 * Then get out because we don't have an a local apic.
+	 * Complain if the BIOS pretends there is one.
 	 */
 	if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
 		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
 			boot_cpu_physical_apicid);
-		printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
-		enable_local_apic = -1;
 		return -1;
 	}
 
 	verify_local_APIC();
 
-	/*
-	 * Should not be necessary because the MP table should list the boot
-	 * CPU too, but we do it for the sake of robustness anyway.
-	 * Makes no sense to do this check in clustered apic mode, so skip it
-	 */
-	if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
-		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
-				boot_cpu_physical_apicid);
-		physid_set(boot_cpu_physical_apicid, phys_cpu_present_map);
-	}
-
-	/*
-	 * Switch from PIC to APIC mode.
-	 */
 	connect_bsp_APIC();
+
+	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+
 	setup_local_APIC();
 
 #ifdef CONFIG_X86_IO_APIC
-	/*
-	 * Now start the IO-APICs
-	 */
-	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
-		setup_IO_APIC();
-#endif
-	return 0;
-}
-
-void __init APIC_late_time_init(void)
-{
-	/* Improve our loops per jiffy estimate */
-	loops_per_jiffy = ((1000 + HZ - 1)/HZ)*cpu_khz;
-	boot_cpu_data.loops_per_jiffy = loops_per_jiffy;
-	cpu_data[0].loops_per_jiffy = loops_per_jiffy;
-
-	/* setup_apic_nmi_watchdog doesn't work properly before cpu_khz is
-	 * initialized.  So redo it here to ensure the boot cpu is setup
-	 * properly.
-	 */
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		setup_apic_nmi_watchdog();
-
-#ifdef CONFIG_X86_IO_APIC
-	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
-		IO_APIC_late_time_init();
+	if (smp_found_config)
+		if (!skip_ioapic_setup && nr_ioapics)
+			setup_IO_APIC();
 #endif
 	setup_boot_APIC_clock();
+
+	return 0;
 }

arch/i386/kernel/i8259.c

@@ -435,8 +435,4 @@ void __init init_IRQ(void)
 		setup_irq(FPU_IRQ, &fpu_irq);
 
 	irq_ctx_init(smp_processor_id());
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	APIC_init();
-#endif
 }

arch/i386/kernel/io_apic.c

@@ -2387,15 +2387,11 @@ void __init setup_IO_APIC(void)
 	sync_Arb_IDs();
 	setup_IO_APIC_irqs();
 	init_IO_APIC_traps();
+	check_timer();
 	if (!acpi_ioapic)
 		print_IO_APIC();
 }
 
-void __init IO_APIC_late_time_init(void)
-{
-	check_timer();
-}
-
 /*
  *	Called after all the initialization is done. If we didnt find any
  *	APIC bugs then we can allow the modify fast path

arch/i386/kernel/smpboot.c

@@ -1078,16 +1078,6 @@ void *xquad_portio;
 EXPORT_SYMBOL(xquad_portio);
 #endif
 
-/*
- * Fall back to non SMP mode after errors.
- *
- */
-static __init void disable_smp(void)
-{
-	cpu_set(0, cpu_sibling_map[0]);
-	cpu_set(0, cpu_core_map[0]);
-}
-
 static void __init smp_boot_cpus(unsigned int max_cpus)
 {
 	int apicid, cpu, bit, kicked;
@@ -1100,6 +1090,7 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	printk("CPU%d: ", 0);
 	print_cpu_info(&cpu_data[0]);
 
+	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
 	boot_cpu_logical_apicid = logical_smp_processor_id();
 	x86_cpu_to_apicid[0] = boot_cpu_physical_apicid;
 
@@ -1111,27 +1102,68 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	cpus_clear(cpu_core_map[0]);
 	cpu_set(0, cpu_core_map[0]);
 
-	map_cpu_to_logical_apicid();
-
 	/*
 	 * If we couldn't find an SMP configuration at boot time,
 	 * get out of here now!
 	 */
 	if (!smp_found_config && !acpi_lapic) {
 		printk(KERN_NOTICE "SMP motherboard not detected.\n");
-		disable_smp();
+		smpboot_clear_io_apic_irqs();
+		phys_cpu_present_map = physid_mask_of_physid(0);
+		if (APIC_init_uniprocessor())
+			printk(KERN_NOTICE "Local APIC not detected."
+					   " Using dummy APIC emulation.\n");
+		map_cpu_to_logical_apicid();
+		cpu_set(0, cpu_sibling_map[0]);
+		cpu_set(0, cpu_core_map[0]);
 		return;
 	}
 
 	/*
-	 * If SMP should be disabled, then really disable it!
+	 * Should not be necessary because the MP table should list the boot
+	 * CPU too, but we do it for the sake of robustness anyway.
+	 * Makes no sense to do this check in clustered apic mode, so skip it
 	 */
-	if (!max_cpus || (enable_local_apic < 0)) {
-		printk(KERN_INFO "SMP mode deactivated.\n");
-		disable_smp();
+	if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
+				boot_cpu_physical_apicid);
+		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+	}
+
+	/*
+	 * If we couldn't find a local APIC, then get out of here now!
+	 */
+	if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
+		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
+			boot_cpu_physical_apicid);
+		printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
+		smpboot_clear_io_apic_irqs();
+		phys_cpu_present_map = physid_mask_of_physid(0);
+		cpu_set(0, cpu_sibling_map[0]);
+		cpu_set(0, cpu_core_map[0]);
 		return;
 	}
 
+	verify_local_APIC();
+
+	/*
+	 * If SMP should be disabled, then really disable it!
+	 */
+	if (!max_cpus) {
+		smp_found_config = 0;
+		printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
+		smpboot_clear_io_apic_irqs();
+		phys_cpu_present_map = physid_mask_of_physid(0);
+		cpu_set(0, cpu_sibling_map[0]);
+		cpu_set(0, cpu_core_map[0]);
+		return;
+	}
+
+	connect_bsp_APIC();
+	setup_local_APIC();
+	map_cpu_to_logical_apicid();
+
+
 	setup_portio_remap();
 
 	/*
@@ -1212,6 +1244,10 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	cpu_set(0, cpu_sibling_map[0]);
 	cpu_set(0, cpu_core_map[0]);
 
+	smpboot_setup_io_apic();
+
+	setup_boot_APIC_clock();
+
 	/*
 	 * Synchronize the TSC with the AP
 	 */

arch/i386/kernel/time.c

@@ -440,8 +440,8 @@ static int time_init_device(void)
 
 device_initcall(time_init_device);
 
-extern void (*late_time_init)(void);
 #ifdef CONFIG_HPET_TIMER
+extern void (*late_time_init)(void);
 /* Duplicate of time_init() below, with hpet_enable part added */
 static void __init hpet_time_init(void)
 {
@@ -458,11 +458,6 @@ static void __init hpet_time_init(void)
 	printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
 
 	time_init_hook();
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	if (enable_local_apic >= 0)
-		APIC_late_time_init();
-#endif
 }
 #endif
 
@@ -487,9 +482,4 @@ void __init time_init(void)
 	printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
 
 	time_init_hook();
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	if (enable_local_apic >= 0)
-		late_time_init = APIC_late_time_init;
-#endif
 }

arch/m32r/kernel/setup_m32700ut.c

@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/m32r.h>

arch/m32r/kernel/setup_mappi.c

@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/m32r.h>

arch/m32r/kernel/setup_mappi2.c

@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/m32r.h>

arch/m32r/kernel/setup_mappi3.c

@@ -11,7 +11,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/m32r.h>

arch/m32r/kernel/setup_opsput.c

@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/m32r.h>

arch/mips/au1000/common/platform.c

@@ -9,6 +9,7 @@
  */
 #include <linux/config.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/resource.h>

arch/ppc/platforms/4xx/ibm440ep.c

@@ -14,6 +14,7 @@
  */
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <platforms/4xx/ibm440ep.h>
 #include <asm/ocp.h>
 #include <asm/ppc4xx_pic.h>

arch/ppc/platforms/4xx/ibmstb4.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/ocp.h>
 #include <asm/ppc4xx_pic.h>
 #include <platforms/4xx/ibmstb4.h>

arch/ppc/platforms/4xx/redwood5.c

@@ -14,7 +14,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
 #include <asm/machdep.h>

arch/ppc/platforms/4xx/redwood6.c

@@ -12,7 +12,7 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
 #include <asm/ppc4xx_pic.h>

arch/ppc/platforms/chrp_pegasos_eth.c

@@ -13,7 +13,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/mv643xx.h>
 #include <linux/pci.h>
 

arch/ppc/platforms/cpci690.c

@@ -21,6 +21,7 @@
 #include <linux/initrd.h>
 #include <linux/root_dev.h>
 #include <linux/mv643xx.h>
+#include <linux/platform_device.h>
 #include <asm/bootinfo.h>
 #include <asm/machdep.h>
 #include <asm/todc.h>

arch/ppc/platforms/ev64260.c

@@ -33,6 +33,7 @@
 #include <linux/console.h>
 #include <linux/initrd.h>
 #include <linux/root_dev.h>
+#include <linux/platform_device.h>
 #if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
 #include <linux/serial.h>
 #include <linux/tty.h>

arch/ppc/platforms/ev64360.c

@@ -25,6 +25,7 @@
 #include <linux/bootmem.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx.h>
+#include <linux/platform_device.h>
 #ifdef CONFIG_BOOTIMG
 #include <linux/bootimg.h>
 #endif

arch/ppc/platforms/hdpu.c

@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/ide.h>
 #include <linux/seq_file.h>
+#include <linux/platform_device.h>
 
 #include <linux/initrd.h>
 #include <linux/root_dev.h>

arch/ppc/platforms/katana.c

@@ -29,6 +29,7 @@
 #include <linux/seq_file.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx.h>
+#include <linux/platform_device.h>
 #ifdef CONFIG_BOOTIMG
 #include <linux/bootimg.h>
 #endif

arch/ppc/platforms/radstone_ppc7d.c

@@ -40,6 +40,7 @@
 #include <linux/serial_core.h>
 #include <linux/mv643xx.h>
 #include <linux/netdevice.h>
+#include <linux/platform_device.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>

arch/ppc/syslib/mpc52xx_devices.c

@@ -15,6 +15,7 @@
 
 #include <linux/fsl_devices.h>
 #include <linux/resource.h>
+#include <linux/platform_device.h>
 #include <asm/mpc52xx.h>
 #include <asm/ppc_sys.h>
 

arch/ppc/syslib/mv64x60.c

@@ -19,6 +19,7 @@
 #include <linux/string.h>
 #include <linux/spinlock.h>
 #include <linux/mv643xx.h>
+#include <linux/platform_device.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>

arch/ppc/syslib/pq2_devices.c

@@ -13,7 +13,7 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <asm/cpm2.h>
 #include <asm/irq.h>

arch/sh/boards/superh/microdev/setup.c

@@ -13,7 +13,7 @@
 
 #include <linux/config.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>

arch/um/drivers/net_kern.c

@@ -20,6 +20,7 @@
 #include "linux/ctype.h"
 #include "linux/bootmem.h"
 #include "linux/ethtool.h"
+#include "linux/platform_device.h"
 #include "asm/uaccess.h"
 #include "user_util.h"
 #include "kern_util.h"

arch/um/drivers/ubd_kern.c

@@ -35,6 +35,7 @@
 #include "linux/blkpg.h"
 #include "linux/genhd.h"
 #include "linux/spinlock.h"
+#include "linux/platform_device.h"
 #include "asm/segment.h"
 #include "asm/uaccess.h"
 #include "asm/irq.h"

arch/xtensa/platform-iss/network.c

@@ -33,6 +33,7 @@
 #include <linux/ethtool.h>
 #include <linux/rtnetlink.h>
 #include <linux/timer.h>
+#include <linux/platform_device.h>
 
 #include <xtensa/simcall.h>
 

drivers/base/platform.c

@@ -10,7 +10,7 @@
  * information.
  */
 
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>

drivers/block/cfq-iosched.c

@@ -2059,10 +2059,8 @@ static void cfq_put_cfqd(struct cfq_data *cfqd)
 	if (!atomic_dec_and_test(&cfqd->ref))
 		return;
 
-	blk_put_queue(q);
-
 	cfq_shutdown_timer_wq(cfqd);
-	q->elevator->elevator_data = NULL;
+	blk_put_queue(q);
 
 	mempool_destroy(cfqd->crq_pool);
 	kfree(cfqd->crq_hash);

drivers/block/floppy.c

@@ -177,7 +177,7 @@ static int print_unex = 1;
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/devfs_fs_kernel.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/buffer_head.h>	/* for invalidate_buffers() */
 
 /*

drivers/block/noop-iosched.c

@@ -9,6 +9,7 @@
 
 static void elevator_noop_add_request(request_queue_t *q, struct request *rq)
 {
+	rq->flags |= REQ_NOMERGE;
 	elv_dispatch_add_tail(q, rq);
 }
 

drivers/char/s3c2410-rtc.c

@@ -20,7 +20,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>

drivers/char/sonypi.c

@@ -48,6 +48,7 @@
 #include <linux/dmi.h>
 #include <linux/err.h>
 #include <linux/kfifo.h>
+#include <linux/platform_device.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>

drivers/char/tb0219.c

@@ -17,7 +17,7 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/module.h>

drivers/char/vr41xx_giu.c

@@ -19,7 +19,7 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>

drivers/char/vr41xx_rtc.c

@@ -17,7 +17,7 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/ioport.h>

drivers/char/watchdog/mpcore_wdt.c

@@ -29,7 +29,7 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware/arm_twd.h>
 #include <asm/uaccess.h>

drivers/char/watchdog/mv64x60_wdt.c

@@ -22,6 +22,8 @@
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/watchdog.h>
+#include <linux/platform_device.h>
+
 #include <asm/mv64x60.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>