forked from Minki/linux
dt-bindings: drm/mediatek: Add Mediatek display subsystem dts binding
Add device tree binding documentation for the display subsystem in Mediatek MT8173 SoCs. Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org>
This commit is contained in:
CK Hu
Philipp Zabel
parent
cb1b5dff49
commit
923dd88d3c
@ -0,0 +1,203 @@
|
||||
Mediatek display subsystem
|
||||
==========================
|
||||
|
||||
The Mediatek display subsystem consists of various DISP function blocks in the
|
||||
MMSYS register space. The connections between them can be configured by output
|
||||
and input selectors in the MMSYS_CONFIG register space. Pixel clock and start
|
||||
of frame signal are distributed to the other function blocks by a DISP_MUTEX
|
||||
function block.
|
||||
|
||||
All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
|
||||
For a description of the MMSYS_CONFIG binding, see
|
||||
Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt.
|
||||
|
||||
DISP function blocks
|
||||
====================
|
||||
|
||||
A display stream starts at a source function block that reads pixel data from
|
||||
memory and ends with a sink function block that drives pixels on a display
|
||||
interface, or writes pixels back to memory. All DISP function blocks have
|
||||
their own register space, interrupt, and clock gate. The blocks that can
|
||||
access memory additionally have to list the IOMMU and local arbiter they are
|
||||
connected to.
|
||||
|
||||
For a description of the display interface sink function blocks, see
|
||||
Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and
|
||||
Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt.
|
||||
|
||||
Required properties (all function blocks):
|
||||
- compatible: "mediatek,<chip>-disp-<function>", one of
|
||||
"mediatek,<chip>-disp-ovl" - overlay (4 layers, blending, csc)
|
||||
"mediatek,<chip>-disp-rdma" - read DMA / line buffer
|
||||
"mediatek,<chip>-disp-wdma" - write DMA
|
||||
"mediatek,<chip>-disp-color" - color processor
|
||||
"mediatek,<chip>-disp-aal" - adaptive ambient light controller
|
||||
"mediatek,<chip>-disp-gamma" - gamma correction
|
||||
"mediatek,<chip>-disp-merge" - merge streams from two RDMA sources
|
||||
"mediatek,<chip>-disp-split" - split stream to two encoders
|
||||
"mediatek,<chip>-disp-ufoe" - data compression engine
|
||||
"mediatek,<chip>-dsi" - DSI controller, see mediatek,dsi.txt
|
||||
"mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt
|
||||
"mediatek,<chip>-disp-mutex" - display mutex
|
||||
"mediatek,<chip>-disp-od" - overdrive
|
||||
- reg: Physical base address and length of the function block register space
|
||||
- interrupts: The interrupt signal from the function block (required, except for
|
||||
merge and split function blocks).
|
||||
- clocks: device clocks
|
||||
See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
|
||||
For most function blocks this is just a single clock input. Only the DSI and
|
||||
DPI controller nodes have multiple clock inputs. These are documented in
|
||||
mediatek,dsi.txt and mediatek,dpi.txt, respectively.
|
||||
|
||||
Required properties (DMA function blocks):
|
||||
- compatible: Should be one of
|
||||
"mediatek,<chip>-disp-ovl"
|
||||
"mediatek,<chip>-disp-rdma"
|
||||
"mediatek,<chip>-disp-wdma"
|
||||
- larb: Should contain a phandle pointing to the local arbiter device as defined
|
||||
in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
|
||||
- iommus: Should point to the respective IOMMU block with master port as
|
||||
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
|
||||
for details.
|
||||
|
||||
Examples:
|
||||
|
||||
mmsys: clock-controller@14000000 {
|
||||
compatible = "mediatek,mt8173-mmsys", "syscon";
|
||||
reg = <0 0x14000000 0 0x1000>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
ovl0: ovl@1400c000 {
|
||||
compatible = "mediatek,mt8173-disp-ovl";
|
||||
reg = <0 0x1400c000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_OVL0>;
|
||||
iommus = <&iommu M4U_PORT_DISP_OVL0>;
|
||||
mediatek,larb = <&larb0>;
|
||||
};
|
||||
|
||||
ovl1: ovl@1400d000 {
|
||||
compatible = "mediatek,mt8173-disp-ovl";
|
||||
reg = <0 0x1400d000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_OVL1>;
|
||||
iommus = <&iommu M4U_PORT_DISP_OVL1>;
|
||||
mediatek,larb = <&larb4>;
|
||||
};
|
||||
|
||||
rdma0: rdma@1400e000 {
|
||||
compatible = "mediatek,mt8173-disp-rdma";
|
||||
reg = <0 0x1400e000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
|
||||
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
|
||||
mediatek,larb = <&larb0>;
|
||||
};
|
||||
|
||||
rdma1: rdma@1400f000 {
|
||||
compatible = "mediatek,mt8173-disp-rdma";
|
||||
reg = <0 0x1400f000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
|
||||
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
|
||||
mediatek,larb = <&larb4>;
|
||||
};
|
||||
|
||||
rdma2: rdma@14010000 {
|
||||
compatible = "mediatek,mt8173-disp-rdma";
|
||||
reg = <0 0x14010000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_RDMA2>;
|
||||
iommus = <&iommu M4U_PORT_DISP_RDMA2>;
|
||||
mediatek,larb = <&larb4>;
|
||||
};
|
||||
|
||||
wdma0: wdma@14011000 {
|
||||
compatible = "mediatek,mt8173-disp-wdma";
|
||||
reg = <0 0x14011000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
|
||||
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
|
||||
mediatek,larb = <&larb0>;
|
||||
};
|
||||
|
||||
wdma1: wdma@14012000 {
|
||||
compatible = "mediatek,mt8173-disp-wdma";
|
||||
reg = <0 0x14012000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_WDMA1>;
|
||||
iommus = <&iommu M4U_PORT_DISP_WDMA1>;
|
||||
mediatek,larb = <&larb4>;
|
||||
};
|
||||
|
||||
color0: color@14013000 {
|
||||
compatible = "mediatek,mt8173-disp-color";
|
||||
reg = <0 0x14013000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_COLOR0>;
|
||||
};
|
||||
|
||||
color1: color@14014000 {
|
||||
compatible = "mediatek,mt8173-disp-color";
|
||||
reg = <0 0x14014000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_COLOR1>;
|
||||
};
|
||||
|
||||
aal@14015000 {
|
||||
compatible = "mediatek,mt8173-disp-aal";
|
||||
reg = <0 0x14015000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_AAL>;
|
||||
};
|
||||
|
||||
gamma@14016000 {
|
||||
compatible = "mediatek,mt8173-disp-gamma";
|
||||
reg = <0 0x14016000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_GAMMA>;
|
||||
};
|
||||
|
||||
ufoe@1401a000 {
|
||||
compatible = "mediatek,mt8173-disp-ufoe";
|
||||
reg = <0 0x1401a000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_UFOE>;
|
||||
};
|
||||
|
||||
dsi0: dsi@1401b000 {
|
||||
/* See mediatek,dsi.txt for details */
|
||||
};
|
||||
|
||||
dpi0: dpi@1401d000 {
|
||||
/* See mediatek,dpi.txt for details */
|
||||
};
|
||||
|
||||
mutex: mutex@14020000 {
|
||||
compatible = "mediatek,mt8173-disp-mutex";
|
||||
reg = <0 0x14020000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_MUTEX_32K>;
|
||||
};
|
||||
|
||||
od@14023000 {
|
||||
compatible = "mediatek,mt8173-disp-od";
|
||||
reg = <0 0x14023000 0 0x1000>;
|
||||
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
|
||||
clocks = <&mmsys CLK_MM_DISP_OD>;
|
||||
};
|
||||
@ -0,0 +1,35 @@
|
||||
Mediatek DPI Device
|
||||
===================
|
||||
|
||||
The Mediatek DPI function block is a sink of the display subsystem and
|
||||
provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
|
||||
output bus.
|
||||
|
||||
Required properties:
|
||||
- compatible: "mediatek,<chip>-dpi"
|
||||
- reg: Physical base address and length of the controller's registers
|
||||
- interrupts: The interrupt signal from the function block.
|
||||
- clocks: device clocks
|
||||
See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
|
||||
- clock-names: must contain "pixel", "engine", and "pll"
|
||||
- port: Output port node with endpoint definitions as described in
|
||||
Documentation/devicetree/bindings/graph.txt. This port should be connected
|
||||
to the input port of an attached HDMI or LVDS encoder chip.
|
||||
|
||||
Example:
|
||||
|
||||
dpi0: dpi@1401d000 {
|
||||
compatible = "mediatek,mt8173-dpi";
|
||||
reg = <0 0x1401d000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
|
||||
clocks = <&mmsys CLK_MM_DPI_PIXEL>,
|
||||
<&mmsys CLK_MM_DPI_ENGINE>,
|
||||
<&apmixedsys CLK_APMIXED_TVDPLL>;
|
||||
clock-names = "pixel", "engine", "pll";
|
||||
|
||||
port {
|
||||
dpi0_out: endpoint {
|
||||
remote-endpoint = <&hdmi0_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,60 @@
|
||||
Mediatek DSI Device
|
||||
===================
|
||||
|
||||
The Mediatek DSI function block is a sink of the display subsystem and can
|
||||
drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
|
||||
channel output.
|
||||
|
||||
Required properties:
|
||||
- compatible: "mediatek,<chip>-dsi"
|
||||
- reg: Physical base address and length of the controller's registers
|
||||
- interrupts: The interrupt signal from the function block.
|
||||
- clocks: device clocks
|
||||
See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
|
||||
- clock-names: must contain "engine", "digital", and "hs"
|
||||
- phys: phandle link to the MIPI D-PHY controller.
|
||||
- phy-names: must contain "dphy"
|
||||
- port: Output port node with endpoint definitions as described in
|
||||
Documentation/devicetree/bindings/graph.txt. This port should be connected
|
||||
to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
|
||||
|
||||
MIPI TX Configuration Module
|
||||
============================
|
||||
|
||||
The MIPI TX configuration module controls the MIPI D-PHY.
|
||||
|
||||
Required properties:
|
||||
- compatible: "mediatek,<chip>-mipi-tx"
|
||||
- reg: Physical base address and length of the controller's registers
|
||||
- clocks: PLL reference clock
|
||||
- clock-output-names: name of the output clock line to the DSI encoder
|
||||
- #clock-cells: must be <0>;
|
||||
- #phy-cells: must be <0>.
|
||||
|
||||
Example:
|
||||
|
||||
mipi_tx0: mipi-dphy@10215000 {
|
||||
compatible = "mediatek,mt8173-mipi-tx";
|
||||
reg = <0 0x10215000 0 0x1000>;
|
||||
clocks = <&clk26m>;
|
||||
clock-output-names = "mipi_tx0_pll";
|
||||
#clock-cells = <0>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
dsi0: dsi@1401b000 {
|
||||
compatible = "mediatek,mt8173-dsi";
|
||||
reg = <0 0x1401b000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
|
||||
clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
|
||||
<&mipi_tx0>;
|
||||
clock-names = "engine", "digital", "hs";
|
||||
phys = <&mipi_tx0>;
|
||||
phy-names = "dphy";
|
||||
|
||||
port {
|
||||
dsi0_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user