leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Browse Source 
Pull networking fixes from David Miller:

 1) Various netfilter fixlets from Pablo and the netfilter team.

 2) Fix regression in IPVS caused by lack of PMTU exceptions on local
    routes in ipv6, from Julian Anastasov.

 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.

 4) Don't crash on poll in TLS, from Daniel Borkmann.

 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
    including Avahi mDNS. From Bart Van Assche.

 6) Missing of_node_put in qcom/emac driver, from Yue Haibing.

 7) We lack checking of the TCP checking in one special case during SYN
    receive, from Frank van der Linden.

 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.

 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.

10) Must grab HW caps before doing quirk checks in stmmac driver, from
    Jose Abreu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  net: stmmac: Run HWIF Quirks after getting HW caps
  neighbour: skip NTF_EXT_LEARNED entries during forced gc
  net: cxgb3: add error handling for sysfs_create_group
  tls: fix waitall behavior in tls_sw_recvmsg
  tls: fix use-after-free in tls_push_record
  l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
  l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
  mlxsw: spectrum_switchdev: Fix port_vlan refcounting
  mlxsw: spectrum_router: Align with new route replace logic
  mlxsw: spectrum_router: Allow appending to dev-only routes
  ipv6: Only emit append events for appended routes
  stmmac: added support for 802.1ad vlan stripping
  cfg80211: fix rcu in cfg80211_unregister_wdev
  mac80211: Move up init of TXQs
  mac80211_hwsim: fix module init error paths
  cfg80211: initialize sinfo in cfg80211_get_station
  nl80211: fix some kernel doc tag mistakes
  hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
  rds: avoid unenecessary cong_update in loop transport
  l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
  ...
This commit is contained in:
Linus Torvalds
2018-06-16 07:39:34 +09:00
parent de7f01c22a 7cfde0af73
commit 9215310cf1
82 changed files with 681 additions and 343 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
include/uapi/linux/netfilter/nf_conntrack_common.h
View File

@@ -112,7 +112,7 @@ enum ip_conntrack_status {
IPS_EXPECTED | IPS_CONFIRMED | IPS_DYING |
IPS_SEQ_ADJUST | IPS_TEMPLATE | IPS_OFFLOAD),
__IPS_MAX_BIT = 14,
__IPS_MAX_BIT = 15,
};
/* Connection tracking event types */

2
include/uapi/linux/netfilter/nf_tables.h
View File

@@ -266,7 +266,7 @@ enum nft_rule_compat_attributes {
* @NFT_SET_INTERVAL: set contains intervals
* @NFT_SET_MAP: set is used as a dictionary
* @NFT_SET_TIMEOUT: set uses timeouts
* @NFT_SET_EVAL: set contains expressions for evaluation
* @NFT_SET_EVAL: set can be updated from the evaluation path
* @NFT_SET_OBJECT: set contains stateful objects
*/
enum nft_set_flags {

28
include/uapi/linux/nl80211.h
View File

@@ -981,18 +981,18 @@
* only the %NL80211_ATTR_IE data is used and updated with this command.
*
* @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
* for the given authenticator address (specified with &NL80211_ATTR_MAC).
* When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the
* for the given authenticator address (specified with %NL80211_ATTR_MAC).
* When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the
* PMK-R0, otherwise it specifies the PMK.
* @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
* configured PMK for the authenticator address identified by
* &NL80211_ATTR_MAC.
* %NL80211_ATTR_MAC.
* @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
* handshake was completed successfully by the driver. The BSSID is
* specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake
* specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake
* offload should send this event after indicating 802.11 association with
* &NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
* &NL80211_CMD_DISCONNECT should be indicated instead.
* %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed
* %NL80211_CMD_DISCONNECT should be indicated instead.
*
* @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
* and RX notification. This command is used both as a request to transmit
@@ -1029,9 +1029,9 @@
* initiated the connection through the connect request.
*
* @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
* ht opmode or vht opmode changes using any of &NL80211_ATTR_SMPS_MODE,
* &NL80211_ATTR_CHANNEL_WIDTH,&NL80211_ATTR_NSS attributes with its
* address(specified in &NL80211_ATTR_MAC).
* ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE,
* %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
* address(specified in %NL80211_ATTR_MAC).
*
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
@@ -2218,7 +2218,7 @@ enum nl80211_commands {
* @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
* authentication operation (u32 attribute with an
* &enum nl80211_external_auth_action value). This is used with the
* &NL80211_CMD_EXTERNAL_AUTH request event.
* %NL80211_CMD_EXTERNAL_AUTH request event.
* @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
* space supports external authentication. This attribute shall be used
* only with %NL80211_CMD_CONNECT request. The driver may offload
@@ -3491,7 +3491,7 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
* base on contiguous rules and wider channels will be allowed to cross
* multiple contiguous/overlapping frequency ranges.
* @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
* @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
* @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
* @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
* @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
@@ -5643,11 +5643,11 @@ enum nl80211_nan_func_attributes {
* @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
* This is a flag.
* @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
* &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
* %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
* @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
* &NL80211_NAN_SRF_BF is present. This is a u8.
* %NL80211_NAN_SRF_BF is present. This is a u8.
* @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
* and only if &NL80211_NAN_SRF_BF isn't present. This is a nested
* and only if %NL80211_NAN_SRF_BF isn't present. This is a nested
* attribute. Each nested attribute is a MAC address.
* @NUM_NL80211_NAN_SRF_ATTR: internal
* @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute