leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Browse Source 
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits)
  powerpc/rtas: Fix watchdog driver temperature read functionality
  powerpc/mm: Fix potential access to freed pages when using hugetlbfs
  powerpc/440: Fix warning early debug code
  powerpc/of: Fix usage of dev_set_name() in of_device_alloc()
  powerpc/pasemi: Use raw spinlock in SMP TB sync
  powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock
  powerpc/rtas: Turn rtas lock into a raw spinlock
  powerpc: Add irqtrace support for 32-bit powerpc
  powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel
  powerpc/BSR: add 4096 byte BSR size
  powerpc: Map more memory early on 601 processors
  powerpc/pmac: Fix DMA ops for MacIO devices
  powerpc/mm: Make k(un)map_atomic out of line
  powerpc: Fix mpic alloc warning
  powerpc: Fix output from show_regs
  powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP
  powerpc/amigaone: Limit ISA I/O range to 4k in the device tree
  powerpc/warp: Platform fix for i2c change
  powerpc: Have git ignore generated files from dtc compile
  powerpc/mpic: Fix mapping of "DCR" based MPIC variants
  ...
This commit is contained in:
Linus Torvalds 2009-06-26 09:39:02 -07:00
commit 919a6d10fd
46 changed files with 1692 additions and 1532 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1168
Documentation/powerpc/booting-without-of.txt
View File

File diff suppressed because it is too large Load Diff

148
Documentation/powerpc/dts-bindings/4xx/emac.txt Normal file
View File

@ -0,0 +1,148 @@
4xx/Axon EMAC ethernet nodes
The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
the Axon bridge. To operate this needs to interact with a ths
special McMAL DMA controller, and sometimes an RGMII or ZMII
interface. In addition to the nodes and properties described
below, the node for the OPB bus on which the EMAC sits must have a
correct clock-frequency property.
i) The EMAC node itself
Required properties:
- device_type : "network"
- compatible : compatible list, contains 2 entries, first is
"ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
405gp, Axon) and second is either "ibm,emac" or
"ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
"ibm,emac4"
- interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
- interrupt-parent : optional, if needed for interrupt mapping
- reg : <registers mapping>
- local-mac-address : 6 bytes, MAC address
- mal-device : phandle of the associated McMAL node
- mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
with this EMAC
- mal-rx-channel : 1 cell, index of the rx channel on McMAL associated
with this EMAC
- cell-index : 1 cell, hardware index of the EMAC cell on a given
ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
each Axon chip)
- max-frame-size : 1 cell, maximum frame size supported in bytes
- rx-fifo-size : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
operations.
For Axon, 2048
- tx-fifo-size : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
operations.
For Axon, 2048.
- fifo-entry-size : 1 cell, size of a fifo entry (used to calculate
thresholds).
For Axon, 0x00000010
- mal-burst-size : 1 cell, MAL burst size (used to calculate thresholds)
in bytes.
For Axon, 0x00000100 (I think ...)
- phy-mode : string, mode of operations of the PHY interface.
Supported values are: "mii", "rmii", "smii", "rgmii",
"tbi", "gmii", rtbi", "sgmii".
For Axon on CAB, it is "rgmii"
- mdio-device : 1 cell, required iff using shared MDIO registers
(440EP). phandle of the EMAC to use to drive the
MDIO lines for the PHY used by this EMAC.
- zmii-device : 1 cell, required iff connected to a ZMII. phandle of
the ZMII device node
- zmii-channel : 1 cell, required iff connected to a ZMII. Which ZMII
channel or 0xffffffff if ZMII is only used for MDIO.
- rgmii-device : 1 cell, required iff connected to an RGMII. phandle
of the RGMII device node.
For Axon: phandle of plb5/plb4/opb/rgmii
- rgmii-channel : 1 cell, required iff connected to an RGMII. Which
RGMII channel is used by this EMAC.
Fox Axon: present, whatever value is appropriate for each
EMAC, that is the content of the current (bogus) "phy-port"
property.
Optional properties:
- phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
a search is performed.
- phy-map : 1 cell, optional, bitmap of addresses to probe the PHY
for, used if phy-address is absent. bit 0x00000001 is
MDIO address 0.
For Axon it can be absent, though my current driver
doesn't handle phy-address yet so for now, keep
0x00ffffff in it.
- rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
operations (if absent the value is the same as
rx-fifo-size). For Axon, either absent or 2048.
- tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
operations (if absent the value is the same as
tx-fifo-size). For Axon, either absent or 2048.
- tah-device : 1 cell, optional. If connected to a TAH engine for
offload, phandle of the TAH device node.
- tah-channel : 1 cell, optional. If appropriate, channel used on the
TAH engine.
Example:
EMAC0: ethernet@40000800 {
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
interrupts = <1c 4 1d 4>;
reg = <40000800 70>;
local-mac-address = [00 04 AC E3 1B 1E];
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <5dc>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rmii";
phy-map = <00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
ii) McMAL node
Required properties:
- device_type : "dma-controller"
- compatible : compatible list, containing 2 entries, first is
"ibm,mcmal-CHIP" where CHIP is the host ASIC (like
emac) and the second is either "ibm,mcmal" or
"ibm,mcmal2".
For Axon, "ibm,mcmal-axon","ibm,mcmal2"
- interrupts : <interrupt mapping for the MAL interrupts sources:
5 sources: tx_eob, rx_eob, serr, txde, rxde>.
For Axon: This is _different_ from the current
firmware. We use the "delayed" interrupts for txeob
and rxeob. Thus we end up with mapping those 5 MPIC
interrupts, all level positive sensitive: 10, 11, 32,
33, 34 (in decimal)
- dcr-reg : < DCR registers range >
- dcr-parent : if needed for dcr-reg
- num-tx-chans : 1 cell, number of Tx channels
- num-rx-chans : 1 cell, number of Rx channels
iii) ZMII node
Required properties:
- compatible : compatible list, containing 2 entries, first is
"ibm,zmii-CHIP" where CHIP is the host ASIC (like
EMAC) and the second is "ibm,zmii".
For Axon, there is no ZMII node.
- reg : <registers mapping>
iv) RGMII node
Required properties:
- compatible : compatible list, containing 2 entries, first is
"ibm,rgmii-CHIP" where CHIP is the host ASIC (like
EMAC) and the second is "ibm,rgmii".
For Axon, "ibm,rgmii-axon","ibm,rgmii"
- reg : <registers mapping>
- revision : as provided by the RGMII new version register if
available.
For Axon: 0x0000012a

50
Documentation/powerpc/dts-bindings/gpio/gpio.txt Normal file
View File

@ -0,0 +1,50 @@
Specifying GPIO information for devices
============================================
1) gpios property
-----------------
Nodes that makes use of GPIOs should define them using `gpios' property,
format of which is: <&gpio-controller1-phandle gpio1-specifier
&gpio-controller2-phandle gpio2-specifier
0 /* holes are permitted, means no GPIO 3 */
&gpio-controller4-phandle gpio4-specifier
...>;
Note that gpio-specifier length is controller dependent.
gpio-specifier may encode: bank, pin position inside the bank,
whether pin is open-drain and whether pin is logically inverted.
Example of the node using GPIOs:
node {
gpios = <&qe_pio_e 18 0>;
};
In this example gpio-specifier is "18 0" and encodes GPIO pin number,
and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
2) gpio-controller nodes
------------------------
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
Example of two SOC GPIO banks defined as gpio-controller nodes:
qe_pio_a: gpio-controller@1400 {
#gpio-cells = <2>;
compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
reg = <0x1400 0x18>;
gpio-controller;
};
qe_pio_e: gpio-controller@1460 {
#gpio-cells = <2>;
compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
reg = <0x1460 0x18>;
gpio-controller;
};

19
Documentation/powerpc/dts-bindings/gpio/mdio.txt Normal file
View File

@ -0,0 +1,19 @@
MDIO on GPIOs
Currently defined compatibles:
- virtual,gpio-mdio
MDC and MDIO lines connected to GPIO controllers are listed in the
gpios property as described in section VIII.1 in the following order:
MDC, MDIO.
Example:
mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qe_pio_a 11
&qe_pio_c 6>;
};

521
Documentation/powerpc/dts-bindings/marvell.txt Normal file
View File

@ -0,0 +1,521 @@
Marvell Discovery mv64[345]6x System Controller chips
===========================================================
The Marvell mv64[345]60 series of system controller chips contain
many of the peripherals needed to implement a complete computer
system. In this section, we define device tree nodes to describe
the system controller chip itself and each of the peripherals
which it contains. Compatible string values for each node are
prefixed with the string "marvell,", for Marvell Technology Group Ltd.
1) The /system-controller node
This node is used to represent the system-controller and must be
present when the system uses a system controller chip. The top-level
system-controller node contains information that is global to all
devices within the system controller chip. The node name begins
with "system-controller" followed by the unit address, which is
the base address of the memory-mapped register set for the system
controller chip.
Required properties:
- ranges : Describes the translation of system controller addresses
for memory mapped registers.
- clock-frequency: Contains the main clock frequency for the system
controller chip.
- reg : This property defines the address and size of the
memory-mapped registers contained within the system controller
chip. The address specified in the "reg" property should match
the unit address of the system-controller node.
- #address-cells : Address representation for system controller
devices. This field represents the number of cells needed to
represent the address of the memory-mapped registers of devices
within the system controller chip.
- #size-cells : Size representation for for the memory-mapped
registers within the system controller chip.
- #interrupt-cells : Defines the width of cells used to represent
interrupts.
Optional properties:
- model : The specific model of the system controller chip. Such
as, "mv64360", "mv64460", or "mv64560".
- compatible : A string identifying the compatibility identifiers
of the system controller chip.
The system-controller node contains child nodes for each system
controller device that the platform uses. Nodes should not be created
for devices which exist on the system controller chip but are not used
Example Marvell Discovery mv64360 system-controller node:
system-controller@f1000000 { /* Marvell Discovery mv64360 */
#address-cells = <1>;
#size-cells = <1>;
model = "mv64360"; /* Default */
compatible = "marvell,mv64360";
clock-frequency = <133333333>;
reg = <0xf1000000 0x10000>;
virtual-reg = <0xf1000000>;
ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
0xa0000000 0xa0000000 0x4000000 /* User FLASH */
0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
[ child node definitions... ]
}
2) Child nodes of /system-controller
a) Marvell Discovery MDIO bus
The MDIO is a bus to which the PHY devices are connected. For each
device that exists on this bus, a child node should be created. See
the definition of the PHY node below for an example of how to define
a PHY.
Required properties:
- #address-cells : Should be <1>
- #size-cells : Should be <0>
- device_type : Should be "mdio"
- compatible : Should be "marvell,mv64360-mdio"
Example:
mdio {
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
compatible = "marvell,mv64360-mdio";
ethernet-phy@0 {
......
};
};
b) Marvell Discovery ethernet controller
The Discover ethernet controller is described with two levels
of nodes. The first level describes an ethernet silicon block
and the second level describes up to 3 ethernet nodes within
that block. The reason for the multiple levels is that the
registers for the node are interleaved within a single set
of registers. The "ethernet-block" level describes the
shared register set, and the "ethernet" nodes describe ethernet
port-specific properties.
Ethernet block node
Required properties:
- #address-cells : <1>
- #size-cells : <0>
- compatible : "marvell,mv64360-eth-block"
- reg : Offset and length of the register set for this block
Example Discovery Ethernet block node:
ethernet-block@2000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,mv64360-eth-block";
reg = <0x2000 0x2000>;
ethernet@0 {
.......
};
};
Ethernet port node
Required properties:
- device_type : Should be "network".
- compatible : Should be "marvell,mv64360-eth".
- reg : Should be <0>, <1>, or <2>, according to which registers
within the silicon block the device uses.
- interrupts : <a> where a is the interrupt number for the port.
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
- phy : the phandle for the PHY connected to this ethernet
controller.
- local-mac-address : 6 bytes, MAC address
Example Discovery Ethernet port node:
ethernet@0 {
device_type = "network";
compatible = "marvell,mv64360-eth";
reg = <0>;
interrupts = <32>;
interrupt-parent = <&PIC>;
phy = <&PHY0>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
c) Marvell Discovery PHY nodes
Required properties:
- device_type : Should be "ethernet-phy"
- interrupts : <a> where a is the interrupt number for this phy.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- reg : The ID number for the phy, usually a small integer
Example Discovery PHY node:
ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
interrupts = <76>; /* GPP 12 */
interrupt-parent = <&PIC>;
reg = <1>;
};
d) Marvell Discovery SDMA nodes
Represent DMA hardware associated with the MPSC (multiprotocol
serial controllers).
Required properties:
- compatible : "marvell,mv64360-sdma"
- reg : Offset and length of the register set for this device
- interrupts : <a> where a is the interrupt number for the DMA
device.
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery SDMA node:
sdma@4000 {
compatible = "marvell,mv64360-sdma";
reg = <0x4000 0xc18>;
virtual-reg = <0xf1004000>;
interrupts = <36>;
interrupt-parent = <&PIC>;
};
e) Marvell Discovery BRG nodes
Represent baud rate generator hardware associated with the MPSC
(multiprotocol serial controllers).
Required properties:
- compatible : "marvell,mv64360-brg"
- reg : Offset and length of the register set for this device
- clock-src : A value from 0 to 15 which selects the clock
source for the baud rate generator. This value corresponds
to the CLKS value in the BRGx configuration register. See
the mv64x60 User's Manual.
- clock-frequence : The frequency (in Hz) of the baud rate
generator's input clock.
- current-speed : The current speed setting (presumably by
firmware) of the baud rate generator.
Example Discovery BRG node:
brg@b200 {
compatible = "marvell,mv64360-brg";
reg = <0xb200 0x8>;
clock-src = <8>;
clock-frequency = <133333333>;
current-speed = <9600>;
};
f) Marvell Discovery CUNIT nodes
Represent the Serial Communications Unit device hardware.
Required properties:
- reg : Offset and length of the register set for this device
Example Discovery CUNIT node:
cunit@f200 {
reg = <0xf200 0x200>;
};
g) Marvell Discovery MPSCROUTING nodes
Represent the Discovery's MPSC routing hardware
Required properties:
- reg : Offset and length of the register set for this device
Example Discovery CUNIT node:
mpscrouting@b500 {
reg = <0xb400 0xc>;
};
h) Marvell Discovery MPSCINTR nodes
Represent the Discovery's MPSC DMA interrupt hardware registers
(SDMA cause and mask registers).
Required properties:
- reg : Offset and length of the register set for this device
Example Discovery MPSCINTR node:
mpsintr@b800 {
reg = <0xb800 0x100>;
};
i) Marvell Discovery MPSC nodes
Represent the Discovery's MPSC (Multiprotocol Serial Controller)
serial port.
Required properties:
- device_type : "serial"
- compatible : "marvell,mv64360-mpsc"
- reg : Offset and length of the register set for this device
- sdma : the phandle for the SDMA node used by this port
- brg : the phandle for the BRG node used by this port
- cunit : the phandle for the CUNIT node used by this port
- mpscrouting : the phandle for the MPSCROUTING node used by this port
- mpscintr : the phandle for the MPSCINTR node used by this port
- cell-index : the hardware index of this cell in the MPSC core
- max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
register
- interrupts : <a> where a is the interrupt number for the MPSC.
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery MPSCINTR node:
mpsc@8000 {
device_type = "serial";
compatible = "marvell,mv64360-mpsc";
reg = <0x8000 0x38>;
virtual-reg = <0xf1008000>;
sdma = <&SDMA0>;
brg = <&BRG0>;
cunit = <&CUNIT>;
mpscrouting = <&MPSCROUTING>;
mpscintr = <&MPSCINTR>;
cell-index = <0>;
max_idle = <40>;
interrupts = <40>;
interrupt-parent = <&PIC>;
};
j) Marvell Discovery Watch Dog Timer nodes
Represent the Discovery's watchdog timer hardware
Required properties:
- compatible : "marvell,mv64360-wdt"
- reg : Offset and length of the register set for this device
Example Discovery Watch Dog Timer node:
wdt@b410 {
compatible = "marvell,mv64360-wdt";
reg = <0xb410 0x8>;
};
k) Marvell Discovery I2C nodes
Represent the Discovery's I2C hardware
Required properties:
- device_type : "i2c"
- compatible : "marvell,mv64360-i2c"
- reg : Offset and length of the register set for this device
- interrupts : <a> where a is the interrupt number for the I2C.
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery I2C node:
compatible = "marvell,mv64360-i2c";
reg = <0xc000 0x20>;
virtual-reg = <0xf100c000>;
interrupts = <37>;
interrupt-parent = <&PIC>;
};
l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
Represent the Discovery's PIC hardware
Required properties:
- #interrupt-cells : <1>
- #address-cells : <0>
- compatible : "marvell,mv64360-pic"
- reg : Offset and length of the register set for this device
- interrupt-controller
Example Discovery PIC node:
pic {
#interrupt-cells = <1>;
#address-cells = <0>;
compatible = "marvell,mv64360-pic";
reg = <0x0 0x88>;
interrupt-controller;
};
m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
Represent the Discovery's MPP hardware
Required properties:
- compatible : "marvell,mv64360-mpp"
- reg : Offset and length of the register set for this device
Example Discovery MPP node:
mpp@f000 {
compatible = "marvell,mv64360-mpp";
reg = <0xf000 0x10>;
};
n) Marvell Discovery GPP (General Purpose Pins) nodes
Represent the Discovery's GPP hardware
Required properties:
- compatible : "marvell,mv64360-gpp"
- reg : Offset and length of the register set for this device
Example Discovery GPP node:
gpp@f000 {
compatible = "marvell,mv64360-gpp";
reg = <0xf100 0x20>;
};
o) Marvell Discovery PCI host bridge node
Represents the Discovery's PCI host bridge device. The properties
for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
1275-1994. A typical value for the compatible property is
"marvell,mv64360-pci".
Example Discovery PCI host bridge node
pci@80000000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "marvell,mv64360-pci";
reg = <0xcf8 0x8>;
ranges = <0x01000000 0x0 0x0
0x88000000 0x0 0x01000000
0x02000000 0x0 0x80000000
0x80000000 0x0 0x08000000>;
bus-range = <0 255>;
clock-frequency = <66000000>;
interrupt-parent = <&PIC>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0a */
0x5000 0 0 1 &PIC 80
0x5000 0 0 2 &PIC 81
0x5000 0 0 3 &PIC 91
0x5000 0 0 4 &PIC 93
/* IDSEL 0x0b */
0x5800 0 0 1 &PIC 91
0x5800 0 0 2 &PIC 93
0x5800 0 0 3 &PIC 80
0x5800 0 0 4 &PIC 81
/* IDSEL 0x0c */
0x6000 0 0 1 &PIC 91
0x6000 0 0 2 &PIC 93
0x6000 0 0 3 &PIC 80
0x6000 0 0 4 &PIC 81
/* IDSEL 0x0d */
0x6800 0 0 1 &PIC 93
0x6800 0 0 2 &PIC 80
0x6800 0 0 3 &PIC 81
0x6800 0 0 4 &PIC 91
>;
};
p) Marvell Discovery CPU Error nodes
Represent the Discovery's CPU error handler device.
Required properties:
- compatible : "marvell,mv64360-cpu-error"
- reg : Offset and length of the register set for this device
- interrupts : the interrupt number for this device
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery CPU Error node:
cpu-error@0070 {
compatible = "marvell,mv64360-cpu-error";
reg = <0x70 0x10 0x128 0x28>;
interrupts = <3>;
interrupt-parent = <&PIC>;
};
q) Marvell Discovery SRAM Controller nodes
Represent the Discovery's SRAM controller device.
Required properties:
- compatible : "marvell,mv64360-sram-ctrl"
- reg : Offset and length of the register set for this device
- interrupts : the interrupt number for this device
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery SRAM Controller node:
sram-ctrl@0380 {
compatible = "marvell,mv64360-sram-ctrl";
reg = <0x380 0x80>;
interrupts = <13>;
interrupt-parent = <&PIC>;
};
r) Marvell Discovery PCI Error Handler nodes
Represent the Discovery's PCI error handler device.
Required properties:
- compatible : "marvell,mv64360-pci-error"
- reg : Offset and length of the register set for this device
- interrupts : the interrupt number for this device
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery PCI Error Handler node:
pci-error@1d40 {
compatible = "marvell,mv64360-pci-error";
reg = <0x1d40 0x40 0xc28 0x4>;
interrupts = <12>;
interrupt-parent = <&PIC>;
};
s) Marvell Discovery Memory Controller nodes
Represent the Discovery's memory controller device.
Required properties:
- compatible : "marvell,mv64360-mem-ctrl"
- reg : Offset and length of the register set for this device
- interrupts : the interrupt number for this device
- interrupt-parent : the phandle for the interrupt controller
that services interrupts for this device.
Example Discovery Memory Controller node:
mem-ctrl@1400 {
compatible = "marvell,mv64360-mem-ctrl";
reg = <0x1400 0x60>;
interrupts = <17>;
interrupt-parent = <&PIC>;
};

25
Documentation/powerpc/dts-bindings/phy.txt Normal file
View File

@ -0,0 +1,25 @@
PHY nodes
Required properties:
- device_type : Should be "ethernet-phy"
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- reg : The ID number for the phy, usually a small integer
- linux,phandle : phandle for this node; likely referenced by an
ethernet controller node.
Example:
ethernet-phy@0 {
linux,phandle = <2452000>
interrupt-parent = <40000>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};

57
Documentation/powerpc/dts-bindings/spi-bus.txt Normal file
View File

@ -0,0 +1,57 @@
SPI (Serial Peripheral Interface) busses
SPI busses can be described with a node for the SPI master device
and a set of child nodes for each SPI slave on the bus. For this
discussion, it is assumed that the system's SPI controller is in
SPI master mode. This binding does not describe SPI controllers
in slave mode.
The SPI master node requires the following properties:
- #address-cells - number of cells required to define a chip select
address on the SPI bus.
- #size-cells - should be zero.
- compatible - name of SPI bus controller following generic names
recommended practice.
No other properties are required in the SPI bus node. It is assumed
that a driver for an SPI bus device will understand that it is an SPI bus.
However, the binding does not attempt to define the specific method for
assigning chip select numbers. Since SPI chip select configuration is
flexible and non-standardized, it is left out of this binding with the
assumption that board specific platform code will be used to manage
chip selects. Individual drivers can define additional properties to
support describing the chip select layout.
SPI slave nodes must be children of the SPI master node and can
contain the following properties.
- reg - (required) chip select address of device.
- compatible - (required) name of SPI device following generic names
recommended practice
- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
- spi-cpol - (optional) Empty property indicating device requires
inverse clock polarity (CPOL) mode
- spi-cpha - (optional) Empty property indicating device requires
shifted clock phase (CPHA) mode
- spi-cs-high - (optional) Empty property indicating device requires
chip select active high
SPI example for an MPC5200 SPI bus:
spi@f00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
interrupt-parent = <&mpc5200_pic>;
ethernet-switch@0 {
compatible = "micrel,ks8995m";
spi-max-frequency = <1000000>;
reg = <0>;
};
codec@1 {
compatible = "ti,tlv320aic26";
spi-max-frequency = <100000>;
reg = <1>;
};
};

25
Documentation/powerpc/dts-bindings/usb-ehci.txt Normal file
View File

@ -0,0 +1,25 @@
USB EHCI controllers
Required properties:
- compatible : should be "usb-ehci".
- reg : should contain at least address and length of the standard EHCI
register set for the device. Optional platform-dependent registers
(debug-port or other) can be also specified here, but only after
definition of standard EHCI registers.
- interrupts : one EHCI interrupt should be described here.
If device registers are implemented in big endian mode, the device
node should have "big-endian-regs" property.
If controller implementation operates with big endian descriptors,
"big-endian-desc" property should be specified.
If both big endian registers and descriptors are used by the controller
implementation, "big-endian" property can be specified instead of having
both "big-endian-regs" and "big-endian-desc".
Example (Sequoia 440EPx):
ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
interrupt-parent = <&UIC0>;
interrupts = <1a 4>;
reg = <0 e0000300 90 0 e0000390 70>;
big-endian;
};

295
Documentation/powerpc/dts-bindings/xilinx.txt Normal file
View File

@ -0,0 +1,295 @@
d) Xilinx IP cores
The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
of standard device types (network, serial, etc.) and miscellaneous
devices (gpio, LCD, spi, etc). Also, since these devices are
implemented within the fpga fabric every instance of the device can be
synthesised with different options that change the behaviour.
Each IP-core has a set of parameters which the FPGA designer can use to
control how the core is synthesized. Historically, the EDK tool would
extract the device parameters relevant to device drivers and copy them
into an 'xparameters.h' in the form of #define symbols. This tells the
device drivers how the IP cores are configured, but it requres the kernel
to be recompiled every time the FPGA bitstream is resynthesized.
The new approach is to export the parameters into the device tree and
generate a new device tree each time the FPGA bitstream changes. The
parameters which used to be exported as #defines will now become
properties of the device node. In general, device nodes for IP-cores
will take the following form:
(name): (generic-name)@(base-address) {
compatible = "xlnx,(ip-core-name)-(HW_VER)"
[, (list of compatible devices), ...];
reg = <(baseaddr) (size)>;
interrupt-parent = <&interrupt-controller-phandle>;
interrupts = < ... >;
xlnx,(parameter1) = "(string-value)";
xlnx,(parameter2) = <(int-value)>;
};
(generic-name): an open firmware-style name that describes the
generic class of device. Preferably, this is one word, such
as 'serial' or 'ethernet'.
(ip-core-name): the name of the ip block (given after the BEGIN
directive in system.mhs). Should be in lowercase
and all underscores '_' converted to dashes '-'.
(name): is derived from the "PARAMETER INSTANCE" value.
(parameter#): C_* parameters from system.mhs. The C_ prefix is
dropped from the parameter name, the name is converted
to lowercase and all underscore '_' characters are
converted to dashes '-'.
(baseaddr): the baseaddr parameter value (often named C_BASEADDR).
(HW_VER): from the HW_VER parameter.
(size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
Typically, the compatible list will include the exact IP core version
followed by an older IP core version which implements the same
interface or any other device with the same interface.
'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
For example, the following block from system.mhs:
BEGIN opb_uartlite
PARAMETER INSTANCE = opb_uartlite_0
PARAMETER HW_VER = 1.00.b
PARAMETER C_BAUDRATE = 115200
PARAMETER C_DATA_BITS = 8
PARAMETER C_ODD_PARITY = 0
PARAMETER C_USE_PARITY = 0
PARAMETER C_CLK_FREQ = 50000000
PARAMETER C_BASEADDR = 0xEC100000
PARAMETER C_HIGHADDR = 0xEC10FFFF
BUS_INTERFACE SOPB = opb_7
PORT OPB_Clk = CLK_50MHz
PORT Interrupt = opb_uartlite_0_Interrupt
PORT RX = opb_uartlite_0_RX
PORT TX = opb_uartlite_0_TX
PORT OPB_Rst = sys_bus_reset_0
END
becomes the following device tree node:
opb_uartlite_0: serial@ec100000 {
device_type = "serial";
compatible = "xlnx,opb-uartlite-1.00.b";
reg = <ec100000 10000>;
interrupt-parent = <&opb_intc_0>;
interrupts = <1 0>; // got this from the opb_intc parameters
current-speed = <d#115200>; // standard serial device prop
clock-frequency = <d#50000000>; // standard serial device prop
xlnx,data-bits = <8>;
xlnx,odd-parity = <0>;
xlnx,use-parity = <0>;
};
Some IP cores actually implement 2 or more logical devices. In
this case, the device should still describe the whole IP core with
a single node and add a child node for each logical device. The
ranges property can be used to translate from parent IP-core to the
registers of each device. In addition, the parent node should be
compatible with the bus type 'xlnx,compound', and should contain
#address-cells and #size-cells, as with any other bus. (Note: this
makes the assumption that both logical devices have the same bus
binding. If this is not true, then separate nodes should be used
for each logical device). The 'cell-index' property can be used to
enumerate logical devices within an IP core. For example, the
following is the system.mhs entry for the dual ps2 controller found
on the ml403 reference design.
BEGIN opb_ps2_dual_ref
PARAMETER INSTANCE = opb_ps2_dual_ref_0
PARAMETER HW_VER = 1.00.a
PARAMETER C_BASEADDR = 0xA9000000
PARAMETER C_HIGHADDR = 0xA9001FFF
BUS_INTERFACE SOPB = opb_v20_0
PORT Sys_Intr1 = ps2_1_intr
PORT Sys_Intr2 = ps2_2_intr
PORT Clkin1 = ps2_clk_rx_1
PORT Clkin2 = ps2_clk_rx_2
PORT Clkpd1 = ps2_clk_tx_1
PORT Clkpd2 = ps2_clk_tx_2
PORT Rx1 = ps2_d_rx_1
PORT Rx2 = ps2_d_rx_2
PORT Txpd1 = ps2_d_tx_1
PORT Txpd2 = ps2_d_tx_2
END
It would result in the following device tree nodes:
opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,compound";
ranges = <0 a9000000 2000>;
// If this device had extra parameters, then they would
// go here.
ps2@0 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
reg = <0 40>;
interrupt-parent = <&opb_intc_0>;
interrupts = <3 0>;
cell-index = <0>;
};
ps2@1000 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
reg = <1000 40>;
interrupt-parent = <&opb_intc_0>;
interrupts = <3 0>;
cell-index = <0>;
};
};
Also, the system.mhs file defines bus attachments from the processor
to the devices. The device tree structure should reflect the bus
attachments. Again an example; this system.mhs fragment:
BEGIN ppc405_virtex4
PARAMETER INSTANCE = ppc405_0
PARAMETER HW_VER = 1.01.a
BUS_INTERFACE DPLB = plb_v34_0
BUS_INTERFACE IPLB = plb_v34_0
END
BEGIN opb_intc
PARAMETER INSTANCE = opb_intc_0
PARAMETER HW_VER = 1.00.c
PARAMETER C_BASEADDR = 0xD1000FC0
PARAMETER C_HIGHADDR = 0xD1000FDF
BUS_INTERFACE SOPB = opb_v20_0
END
BEGIN opb_uart16550
PARAMETER INSTANCE = opb_uart16550_0
PARAMETER HW_VER = 1.00.d
PARAMETER C_BASEADDR = 0xa0000000
PARAMETER C_HIGHADDR = 0xa0001FFF
BUS_INTERFACE SOPB = opb_v20_0
END
BEGIN plb_v34
PARAMETER INSTANCE = plb_v34_0
PARAMETER HW_VER = 1.02.a
END
BEGIN plb_bram_if_cntlr
PARAMETER INSTANCE = plb_bram_if_cntlr_0
PARAMETER HW_VER = 1.00.b
PARAMETER C_BASEADDR = 0xFFFF0000
PARAMETER C_HIGHADDR = 0xFFFFFFFF
BUS_INTERFACE SPLB = plb_v34_0
END
BEGIN plb2opb_bridge
PARAMETER INSTANCE = plb2opb_bridge_0
PARAMETER HW_VER = 1.01.a
PARAMETER C_RNG0_BASEADDR = 0x20000000
PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
PARAMETER C_RNG1_BASEADDR = 0x60000000
PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
PARAMETER C_RNG2_BASEADDR = 0x80000000
PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
PARAMETER C_RNG3_BASEADDR = 0xC0000000
PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
BUS_INTERFACE SPLB = plb_v34_0
BUS_INTERFACE MOPB = opb_v20_0
END
Gives this device tree (some properties removed for clarity):
plb@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,plb-v34-1.02.a";
device_type = "ibm,plb";
ranges; // 1:1 translation
plb_bram_if_cntrl_0: bram@ffff0000 {
reg = <ffff0000 10000>;
}
opb@20000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <20000000 20000000 20000000
60000000 60000000 20000000
80000000 80000000 40000000
c0000000 c0000000 20000000>;
opb_uart16550_0: serial@a0000000 {
reg = <a00000000 2000>;
};
opb_intc_0: interrupt-controller@d1000fc0 {
reg = <d1000fc0 20>;
};
};
};
That covers the general approach to binding xilinx IP cores into the
device tree. The following are bindings for specific devices:
i) Xilinx ML300 Framebuffer
Simple framebuffer device from the ML300 reference design (also on the
ML403 reference design as well as others).
Optional properties:
- resolution = <xres yres> : pixel resolution of framebuffer. Some
implementations use a different resolution.
Default is <d#640 d#480>
- virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
Default is <d#1024 d#480>.
- rotate-display (empty) : rotate display 180 degrees.
ii) Xilinx SystemACE
The Xilinx SystemACE device is used to program FPGAs from an FPGA
bitstream stored on a CF card. It can also be used as a generic CF
interface device.
Optional properties:
- 8-bit (empty) : Set this property for SystemACE in 8 bit mode
iii) Xilinx EMAC and Xilinx TEMAC
Xilinx Ethernet devices. In addition to general xilinx properties
listed above, nodes for these devices should include a phy-handle
property, and may include other common network device properties
like local-mac-address.
iv) Xilinx Uartlite
Xilinx uartlite devices are simple fixed speed serial ports.
Required properties:
- current-speed : Baud rate of uartlite
v) Xilinx hwicap
Xilinx hwicap devices provide access to the configuration logic
of the FPGA through the Internal Configuration Access Port
(ICAP). The ICAP enables partial reconfiguration of the FPGA,
readback of the configuration information, and some control over
'warm boots' of the FPGA fabric.
Required properties:
- xlnx,family : The family of the FPGA, necessary since the
capabilities of the underlying ICAP hardware
differ between different families. May be
'virtex2p', 'virtex4', or 'virtex5'.
vi) Xilinx Uart 16550
Xilinx UART 16550 devices are very similar to the NS16550 but with
different register spacing and an offset from the base address.
Required properties:
- clock-frequency : Frequency of the clock input
- reg-offset : A value of 3 is required
- reg-shift : A value of 2 is required

1
arch/powerpc/Kconfig
View File

@ -62,7 +62,6 @@ config HAVE_LATENCYTOP_SUPPORT
config TRACE_IRQFLAGS_SUPPORT
bool
depends on PPC64
default y
config LOCKDEP_SUPPORT

10
arch/powerpc/boot/.gitignore vendored
View File

@ -36,3 +36,13 @@ zImage.pseries
zconf.h
zlib.h
zutil.h
fdt.c
fdt.h
fdt_ro.c
fdt_rw.c
fdt_strerror.c
fdt_sw.c
fdt_wip.c
libfdt.h
libfdt_internal.h

4
arch/powerpc/boot/dts/amigaone.dts
View File

@ -70,8 +70,8 @@
devsel-speed = <0x00000001>;
min-grant = <0>;
max-latency = <0>;
/* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
/* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
interrupt-parent = <&i8259>;
#interrupt-cells = <2>;
#address-cells = <2>;

1
arch/powerpc/boot/dts/mpc8569mds.dts
View File

@ -253,6 +253,7 @@
/* Filled in by U-Boot */
clock-frequency = <0>;
status = "disabled";
sdhci,1-bit-only;
};
crypto@30000 {

2
arch/powerpc/include/asm/cpm1.h
View File

@ -598,8 +598,6 @@ typedef struct risc_timer_pram {
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
#define IMAP_ADDR (get_immrbase())
#define CPM_PIN_INPUT 0
#define CPM_PIN_OUTPUT 1
#define CPM_PIN_PRIMARY 0

24
arch/powerpc/include/asm/dma-mapping.h
View File

@ -309,7 +309,9 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
if (dma_ops->sync_single_range_for_cpu)
dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
size, direction);
}
@ -320,7 +322,9 @@ static inline void dma_sync_single_for_device(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
dma_ops->sync_single_range_for_device(dev, dma_handle,
if (dma_ops->sync_single_range_for_device)
dma_ops->sync_single_range_for_device(dev, dma_handle,
0, size, direction);
}
@ -331,7 +335,9 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
if (dma_ops->sync_sg_for_cpu)
dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
}
static inline void dma_sync_sg_for_device(struct device *dev,
@ -341,7 +347,9 @@ static inline void dma_sync_sg_for_device(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
if (dma_ops->sync_sg_for_device)
dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
@ -351,7 +359,9 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
dma_ops->sync_single_range_for_cpu(dev, dma_handle,
if (dma_ops->sync_single_range_for_cpu)
dma_ops->sync_single_range_for_cpu(dev, dma_handle,
offset, size, direction);
}
@ -362,7 +372,9 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
if (dma_ops->sync_single_range_for_device)
dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
size, direction);
}
#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */

57
arch/powerpc/include/asm/highmem.h
View File

@ -22,9 +22,7 @@
#ifdef __KERNEL__
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/highmem.h>
#include <asm/kmap_types.h>
#include <asm/tlbflush.h>
#include <asm/page.h>
@ -62,6 +60,9 @@ extern pte_t *pkmap_page_table;
extern void *kmap_high(struct page *page);
extern void kunmap_high(struct page *page);
extern void *kmap_atomic_prot(struct page *page, enum km_type type,
pgprot_t prot);
extern void kunmap_atomic(void *kvaddr, enum km_type type);
static inline void *kmap(struct page *page)
{
@ -79,62 +80,11 @@ static inline void kunmap(struct page *page)
kunmap_high(page);
}
/*
* The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
* gives a more generic (and caching) interface. But kmap_atomic can
* be used in IRQ contexts, so in some (very limited) cases we need
* it.
*/
static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
{
unsigned int idx;
unsigned long vaddr;
/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
pagefault_disable();
if (!PageHighMem(page))
return page_address(page);
debug_kmap_atomic(type);
idx = type + KM_TYPE_NR*smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
#ifdef CONFIG_DEBUG_HIGHMEM
BUG_ON(!pte_none(*(kmap_pte-idx)));
#endif
__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
local_flush_tlb_page(NULL, vaddr);
return (void*) vaddr;
}
static inline void *kmap_atomic(struct page *page, enum km_type type)
{
return kmap_atomic_prot(page, type, kmap_prot);
}
static inline void kunmap_atomic(void *kvaddr, enum km_type type)
{
#ifdef CONFIG_DEBUG_HIGHMEM
unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
pagefault_enable();
return;
}
BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
/*
* force other mappings to Oops if they'll try to access
* this pte without first remap it
*/
pte_clear(&init_mm, vaddr, kmap_pte-idx);
local_flush_tlb_page(NULL, vaddr);
#endif
pagefault_enable();
}
static inline struct page *kmap_atomic_to_page(void *ptr)
{
unsigned long idx, vaddr = (unsigned long) ptr;
@ -148,6 +98,7 @@ static inline struct page *kmap_atomic_to_page(void *ptr)
return pte_page(*pte);
}
#define flush_cache_kmaps() flush_cache_all()
#endif /* __KERNEL__ */

20
arch/powerpc/include/asm/hw_irq.h
View File

@ -68,13 +68,13 @@ static inline int irqs_disabled_flags(unsigned long flags)
#if defined(CONFIG_BOOKE)
#define SET_MSR_EE(x) mtmsr(x)
#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
#define raw_local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
#else
#define SET_MSR_EE(x) mtmsr(x)
#define local_irq_restore(flags) mtmsr(flags)
#define raw_local_irq_restore(flags) mtmsr(flags)
#endif
static inline void local_irq_disable(void)
static inline void raw_local_irq_disable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 0": : :"memory");
@ -86,7 +86,7 @@ static inline void local_irq_disable(void)
#endif
}
static inline void local_irq_enable(void)
static inline void raw_local_irq_enable(void)
{
#ifdef CONFIG_BOOKE
__asm__ __volatile__("wrteei 1": : :"memory");
@ -98,7 +98,7 @@ static inline void local_irq_enable(void)
#endif
}
static inline void local_irq_save_ptr(unsigned long *flags)
static inline void raw_local_irq_save_ptr(unsigned long *flags)
{
unsigned long msr;
msr = mfmsr();
@ -110,12 +110,12 @@ static inline void local_irq_save_ptr(unsigned long *flags)
#endif
}
#define local_save_flags(flags) ((flags) = mfmsr())
#define local_irq_save(flags) local_irq_save_ptr(&flags)
#define irqs_disabled() ((mfmsr() & MSR_EE) == 0)
#define raw_local_save_flags(flags) ((flags) = mfmsr())
#define raw_local_irq_save(flags) raw_local_irq_save_ptr(&flags)
#define raw_irqs_disabled() ((mfmsr() & MSR_EE) == 0)
#define raw_irqs_disabled_flags(flags) (((flags) & MSR_EE) == 0)
#define hard_irq_enable() local_irq_enable()
#define hard_irq_disable() local_irq_disable()
#define hard_irq_disable() raw_local_irq_disable()
static inline int irqs_disabled_flags(unsigned long flags)
{

3
arch/powerpc/include/asm/pte-hash64-64k.h
View File

@ -47,7 +47,8 @@
* generic accessors and iterators here
*/
#define __real_pte(e,p) ((real_pte_t) { \
(e), pte_val(*((p) + PTRS_PER_PTE)) })
(e), ((e) & _PAGE_COMBO) ? \
(pte_val(*((p) + PTRS_PER_PTE))) : 0 })
#define __rpte_to_hidx(r,index) ((pte_val((r).pte) & _PAGE_COMBO) ? \
(((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
#define __rpte_to_pte(r) ((r).pte)

5
arch/powerpc/include/asm/rtas.h
View File

@ -58,7 +58,7 @@ struct rtas_t {
unsigned long entry; /* physical address pointer */
unsigned long base; /* physical address pointer */
unsigned long size;
spinlock_t lock;
raw_spinlock_t lock;
struct rtas_args args;
struct device_node *dev; /* virtual address pointer */
};
@ -245,5 +245,8 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg)
(devfn << 8) | (reg & 0xff);
}
extern void __cpuinit rtas_give_timebase(void);
extern void __cpuinit rtas_take_timebase(void);
#endif /* __KERNEL__ */
#endif /* _POWERPC_RTAS_H */

127
arch/powerpc/kernel/entry_32.S
View File

@ -191,11 +191,49 @@ transfer_to_handler_cont:
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
#ifdef CONFIG_TRACE_IRQFLAGS
lis r12,reenable_mmu@h
ori r12,r12,reenable_mmu@l
mtspr SPRN_SRR0,r12
mtspr SPRN_SRR1,r10
SYNC
RFI
reenable_mmu: /* re-enable mmu so we can */
mfmsr r10
lwz r12,_MSR(r1)
xor r10,r10,r12
andi. r10,r10,MSR_EE /* Did EE change? */
beq 1f
/* Save handler and return address into the 2 unused words
* of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
* else can be recovered from the pt_regs except r3 which for
* normal interrupts has been set to pt_regs and for syscalls
* is an argument, so we temporarily use ORIG_GPR3 to save it
*/
stw r9,8(r1)
stw r11,12(r1)
stw r3,ORIG_GPR3(r1)
bl trace_hardirqs_off
lwz r0,GPR0(r1)
lwz r3,ORIG_GPR3(r1)
lwz r4,GPR4(r1)
lwz r5,GPR5(r1)
lwz r6,GPR6(r1)
lwz r7,GPR7(r1)
lwz r8,GPR8(r1)
lwz r9,8(r1)
lwz r11,12(r1)
1: mtctr r11
mtlr r9
bctr /* jump to handler */
#else /* CONFIG_TRACE_IRQFLAGS */
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
SYNC
RFI /* jump to handler, enable MMU */
#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
@ -251,6 +289,31 @@ _GLOBAL(DoSyscall)
#ifdef SHOW_SYSCALLS
bl do_show_syscall
#endif /* SHOW_SYSCALLS */
#ifdef CONFIG_TRACE_IRQFLAGS
/* Return from syscalls can (and generally will) hard enable
* interrupts. You aren't supposed to call a syscall with
* interrupts disabled in the first place. However, to ensure
* that we get it right vs. lockdep if it happens, we force
* that hard enable here with appropriate tracing if we see
* that we have been called with interrupts off
*/
mfmsr r11
andi. r12,r11,MSR_EE
bne+ 1f
/* We came in with interrupts disabled, we enable them now */
bl trace_hardirqs_on
mfmsr r11
lwz r0,GPR0(r1)
lwz r3,GPR3(r1)
lwz r4,GPR4(r1)
ori r11,r11,MSR_EE
lwz r5,GPR5(r1)
lwz r6,GPR6(r1)
lwz r7,GPR7(r1)
lwz r8,GPR8(r1)
mtmsr r11
1:
#endif /* CONFIG_TRACE_IRQFLAGS */
rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
@ -275,6 +338,7 @@ ret_from_syscall:
rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
/* Note: We don't bother telling lockdep about it */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
@ -288,6 +352,19 @@ ret_from_syscall:
oris r11,r11,0x1000 /* Set SO bit in CR */
stw r11,_CCR(r1)
syscall_exit_cont:
lwz r8,_MSR(r1)
#ifdef CONFIG_TRACE_IRQFLAGS
/* If we are going to return from the syscall with interrupts
* off, we trace that here. It shouldn't happen though but we
* want to catch the bugger if it does right ?
*/
andi. r10,r8,MSR_EE
bne+ 1f
stw r3,GPR3(r1)
bl trace_hardirqs_off
lwz r3,GPR3(r1)
1:
#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
@ -311,7 +388,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
mtlr r4
mtcr r5
lwz r7,_NIP(r1)
lwz r8,_MSR(r1)
FIX_SRR1(r8, r0)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
@ -394,7 +470,9 @@ syscall_exit_work:
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq ret_from_except
/* Re-enable interrupts */
/* Re-enable interrupts. There is no need to trace that with
* lockdep as we are supposed to have IRQs on at this point
*/
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10)
@ -705,6 +783,7 @@ ret_from_except:
/* Hard-disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt. */
/* Note: We don't bother telling lockdep about it */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC /* Some chip revs have problems here... */
MTMSRD(r10) /* disable interrupts */
@ -744,11 +823,24 @@ resume_kernel:
beq+ restore
andi. r0,r3,MSR_EE /* interrupts off? */
beq restore /* don't schedule if so */
#ifdef CONFIG_TRACE_IRQFLAGS
/* Lockdep thinks irqs are enabled, we need to call
* preempt_schedule_irq with IRQs off, so we inform lockdep
* now that we -did- turn them off already
*/
bl trace_hardirqs_off
#endif
1: bl preempt_schedule_irq
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r3,TI_FLAGS(r9)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
#ifdef CONFIG_TRACE_IRQFLAGS
/* And now, to properly rebalance the above, we tell lockdep they
* are being turned back on, which will happen when we return
*/
bl trace_hardirqs_on
#endif
#else
resume_kernel:
#endif /* CONFIG_PREEMPT */
@ -765,6 +857,28 @@ restore:
stw r6,icache_44x_need_flush@l(r4)
1:
#endif /* CONFIG_44x */
lwz r9,_MSR(r1)
#ifdef CONFIG_TRACE_IRQFLAGS
/* Lockdep doesn't know about the fact that IRQs are temporarily turned
* off in this assembly code while peeking at TI_FLAGS() and such. However
* we need to inform it if the exception turned interrupts off, and we
* are about to trun them back on.
*
* The problem here sadly is that we don't know whether the exceptions was
* one that turned interrupts off or not. So we always tell lockdep about
* turning them on here when we go back to wherever we came from with EE
* on, even if that may meen some redudant calls being tracked. Maybe later
* we could encode what the exception did somewhere or test the exception
* type in the pt_regs but that sounds overkill
*/
andi. r10,r9,MSR_EE
beq 1f
bl trace_hardirqs_on
lwz r9,_MSR(r1)
1:
#endif /* CONFIG_TRACE_IRQFLAGS */
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
@ -782,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
stwcx. r0,0,r1 /* to clear the reservation */
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
lwz r9,_MSR(r1)
andi. r10,r9,MSR_RI /* check if this exception occurred */
beql nonrecoverable /* at a bad place (MSR:RI = 0) */
@ -805,7 +918,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
MTMSRD(r10) /* clear the RI bit */
.globl exc_exit_restart
exc_exit_restart:
lwz r9,_MSR(r1)
lwz r12,_NIP(r1)
FIX_SRR1(r9,r10)
mtspr SPRN_SRR0,r12
@ -1035,11 +1147,18 @@ do_work: /* r10 contains MSR_KERNEL here */
beq do_user_signal
do_resched: /* r10 contains MSR_KERNEL here */
/* Note: We don't need to inform lockdep that we are enabling
* interrupts here. As far as it knows, they are already enabled
*/
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* hard-enable interrupts */
bl schedule
recheck:
/* Note: And we don't tell it we are disabling them again
* neither. Those disable/enable cycles used to peek at
* TI_FLAGS aren't advertised.
*/
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */

17
arch/powerpc/kernel/head_32.S
View File

@ -1124,9 +1124,8 @@ mmu_off:
RFI
/*
* Use the first pair of BAT registers to map the 1st 16MB
* of RAM to PAGE_OFFSET. From this point on we can't safely
* call OF any more.
* On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
* (we keep one for debugging) and on others, we use one 256M BAT.
*/
initial_bats:
lis r11,PAGE_OFFSET@h
@ -1136,12 +1135,16 @@ initial_bats:
bne 4f
ori r11,r11,4 /* set up BAT registers for 601 */
li r8,0x7f /* valid, block length = 8MB */
oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */
oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */
mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
mtspr SPRN_IBAT0L,r8 /* lower BAT register */
mtspr SPRN_IBAT1U,r9
mtspr SPRN_IBAT1L,r10
addis r11,r11,0x800000@h
addis r8,r8,0x800000@h
mtspr SPRN_IBAT1U,r11
mtspr SPRN_IBAT1L,r8
addis r11,r11,0x800000@h
addis r8,r8,0x800000@h
mtspr SPRN_IBAT2U,r11
mtspr SPRN_IBAT2L,r8
isync
blr

2
arch/powerpc/kernel/of_device.c
View File

@ -76,7 +76,7 @@ struct of_device *of_device_alloc(struct device_node *np,
dev->dev.archdata.of_node = np;
if (bus_id)
dev_set_name(&dev->dev, bus_id);
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(dev);

2
arch/powerpc/kernel/process.c
View File

@ -528,7 +528,7 @@ void show_regs(struct pt_regs * regs)
for (i = 0; i < 32; i++) {
if ((i % REGS_PER_LINE) == 0)
printk("\n" KERN_INFO "GPR%02d: ", i);
printk("\nGPR%02d: ", i);
printk(REG " ", regs->gpr[i]);
if (i == LAST_VOLATILE && !FULL_REGS(regs))
break;

69
arch/powerpc/kernel/rtas.c
View File

@ -38,9 +38,10 @@
#include <asm/syscalls.h>
#include <asm/smp.h>
#include <asm/atomic.h>
#include <asm/time.h>
struct rtas_t rtas = {
.lock = SPIN_LOCK_UNLOCKED
.lock = __RAW_SPIN_LOCK_UNLOCKED
};
EXPORT_SYMBOL(rtas);
@ -67,6 +68,28 @@ unsigned long rtas_rmo_buf;
void (*rtas_flash_term_hook)(int);
EXPORT_SYMBOL(rtas_flash_term_hook);
/* RTAS use home made raw locking instead of spin_lock_irqsave
* because those can be called from within really nasty contexts
* such as having the timebase stopped which would lockup with
* normal locks and spinlock debugging enabled
*/
static unsigned long lock_rtas(void)
{
unsigned long flags;
local_irq_save(flags);
preempt_disable();
__raw_spin_lock_flags(&rtas.lock, flags);
return flags;
}
static void unlock_rtas(unsigned long flags)
{
__raw_spin_unlock(&rtas.lock);
local_irq_restore(flags);
preempt_enable();
}
/*
* call_rtas_display_status and call_rtas_display_status_delay
* are designed only for very early low-level debugging, which
@ -79,7 +102,7 @@ static void call_rtas_display_status(char c)
if (!rtas.base)
return;
spin_lock_irqsave(&rtas.lock, s);
s = lock_rtas();
args->token = 10;
args->nargs = 1;
@ -89,7 +112,7 @@ static void call_rtas_display_status(char c)
enter_rtas(__pa(args));
spin_unlock_irqrestore(&rtas.lock, s);
unlock_rtas(s);
}
static void call_rtas_display_status_delay(char c)
@ -411,8 +434,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
return -1;
/* Gotta do something different here, use global lock for now... */
spin_lock_irqsave(&rtas.lock, s);
s = lock_rtas();
rtas_args = &rtas.args;
rtas_args->token = token;
@ -439,8 +461,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
outputs[i] = rtas_args->rets[i+1];
ret = (nret > 0)? rtas_args->rets[0]: 0;
/* Gotta do something different here, use global lock for now... */
spin_unlock_irqrestore(&rtas.lock, s);
unlock_rtas(s);
if (buff_copy) {
log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
@ -837,7 +858,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
buff_copy = get_errorlog_buffer();
spin_lock_irqsave(&rtas.lock, flags);
flags = lock_rtas();
rtas.args = args;
enter_rtas(__pa(&rtas.args));
@ -848,7 +869,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
if (args.rets[0] == -1)
errbuf = __fetch_rtas_last_error(buff_copy);
spin_unlock_irqrestore(&rtas.lock, flags);
unlock_rtas(flags);
if (buff_copy) {
if (errbuf)
@ -951,3 +972,33 @@ int __init early_init_dt_scan_rtas(unsigned long node,
/* break now */
return 1;
}
static raw_spinlock_t timebase_lock;
static u64 timebase = 0;
void __cpuinit rtas_give_timebase(void)
{
unsigned long flags;
local_irq_save(flags);
hard_irq_disable();
__raw_spin_lock(&timebase_lock);
rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
timebase = get_tb();
__raw_spin_unlock(&timebase_lock);
while (timebase)
barrier();
rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
local_irq_restore(flags);
}
void __cpuinit rtas_take_timebase(void)
{
while (!timebase)
barrier();
__raw_spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
__raw_spin_unlock(&timebase_lock);
}

2
arch/powerpc/kernel/setup_32.c
View File

@ -119,6 +119,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
*/
notrace void __init machine_init(unsigned long dt_ptr)
{
lockdep_init();
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();

3
arch/powerpc/kernel/smp.c
View File

@ -68,7 +68,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map);
/* SMP operations for this machine */
struct smp_ops_t *smp_ops;
static volatile unsigned int cpu_callin_map[NR_CPUS];
/* Can't be static due to PowerMac hackery */
volatile unsigned int cpu_callin_map[NR_CPUS];
int smt_enabled_at_boot = 1;

2
arch/powerpc/kernel/udbg_16550.c
View File

@ -219,7 +219,7 @@ void udbg_init_pas_realmode(void)
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
#include <platforms/44x/44x.h>
static int udbg_44x_as1_flush(void)
static void udbg_44x_as1_flush(void)
{
if (udbg_comport) {
while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)

1
arch/powerpc/mm/Makefile
View File

@ -30,3 +30,4 @@ obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
obj-$(CONFIG_HIGHMEM) += highmem.o

77
arch/powerpc/mm/highmem.c Normal file
View File

@ -0,0 +1,77 @@
/*
* highmem.c: virtual kernel memory mappings for high memory
*
* PowerPC version, stolen from the i386 version.
*
* Used in CONFIG_HIGHMEM systems for memory pages which
* are not addressable by direct kernel virtual addresses.
*
* Copyright (C) 1999 Gerhard Wichert, Siemens AG
* Gerhard.Wichert@pdb.siemens.de
*
*
* Redesigned the x86 32-bit VM architecture to deal with
* up to 16 Terrabyte physical memory. With current x86 CPUs
* we now support up to 64 Gigabytes physical RAM.
*
* Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
*
* Reworked for PowerPC by various contributors. Moved from
* highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
*/
#include <linux/highmem.h>
#include <linux/module.h>
/*
* The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
* gives a more generic (and caching) interface. But kmap_atomic can
* be used in IRQ contexts, so in some (very limited) cases we need
* it.
*/
void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
{
unsigned int idx;
unsigned long vaddr;
/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
pagefault_disable();
if (!PageHighMem(page))
return page_address(page);
debug_kmap_atomic(type);
idx = type + KM_TYPE_NR*smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
#ifdef CONFIG_DEBUG_HIGHMEM
BUG_ON(!pte_none(*(kmap_pte-idx)));
#endif
__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
local_flush_tlb_page(NULL, vaddr);
return (void*) vaddr;
}
EXPORT_SYMBOL(kmap_atomic_prot);
void kunmap_atomic(void *kvaddr, enum km_type type)
{
#ifdef CONFIG_DEBUG_HIGHMEM
unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
pagefault_enable();
return;
}
BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
/*
* force other mappings to Oops if they'll try to access
* this pte without first remap it
*/
pte_clear(&init_mm, vaddr, kmap_pte-idx);
local_flush_tlb_page(NULL, vaddr);
#endif
pagefault_enable();
}
EXPORT_SYMBOL(kunmap_atomic);

46
arch/powerpc/platforms/44x/warp.c
View File

@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/of_gpio.h>
#include <linux/of_i2c.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@ -65,7 +66,6 @@ define_machine(warp) {
static u32 post_info;
/* I am not sure this is the best place for this... */
static int __init warp_post_info(void)
{
struct device_node *np;
@ -194,9 +194,9 @@ static int pika_setup_leds(void)
return 0;
}
static void pika_setup_critical_temp(struct i2c_client *client)
static void pika_setup_critical_temp(struct device_node *np,
struct i2c_client *client)
{
struct device_node *np;
int irq, rc;
/* Do this before enabling critical temp interrupt since we
@ -208,14 +208,7 @@ static void pika_setup_critical_temp(struct i2c_client *client)
i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
i2c_smbus_write_byte_data(client, 3, 0); /* Tlow */
np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
if (np == NULL) {
printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
return;
}
irq = irq_of_parse_and_map(np, 0);
of_node_put(np);
if (irq == NO_IRQ) {
printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
return;
@ -244,32 +237,24 @@ static inline void pika_dtm_check_fan(void __iomem *fpga)
static int pika_dtm_thread(void __iomem *fpga)
{
struct i2c_adapter *adap;
struct device_node *np;
struct i2c_client *client;
/* We loop in case either driver was compiled as a module and
* has not been insmoded yet.
*/
while (!(adap = i2c_get_adapter(0))) {
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ);
np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
if (np == NULL)
return -ENOENT;
client = of_find_i2c_device_by_node(np);
if (client == NULL) {
of_node_put(np);
return -ENOENT;
}
while (1) {
list_for_each_entry(client, &adap->clients, list)
if (client->addr == 0x4a)
goto found_it;
pika_setup_critical_temp(np, client);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ);
}
of_node_put(np);
found_it:
pika_setup_critical_temp(client);
i2c_put_adapter(adap);
printk(KERN_INFO "PIKA DTM thread running.\n");
printk(KERN_INFO "Warp DTM thread running.\n");
while (!kthread_should_stop()) {
int val;
@ -291,7 +276,6 @@ found_it:
return 0;
}
static int __init pika_dtm_start(void)
{
struct task_struct *dtm_thread;

1
arch/powerpc/platforms/85xx/mpc85xx_mds.c
View File

@ -285,6 +285,7 @@ static struct of_device_id mpc85xx_ids[] = {
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
{ .compatible = "fsl,rapidio-delta", },
{},
};

9
arch/powerpc/platforms/85xx/smp.c
View File

@ -52,20 +52,19 @@ smp_85xx_kick_cpu(int nr)
pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
local_irq_save(flags);
np = of_get_cpu_node(nr, NULL);
cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
if (cpu_rel_addr == NULL) {
printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
local_irq_restore(flags);
return;
}
/* Map the spin table */
bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
local_irq_save(flags);
out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
@ -73,10 +72,10 @@ smp_85xx_kick_cpu(int nr)
while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
mdelay(1);
iounmap(bptr_vaddr);
local_irq_restore(flags);
iounmap(bptr_vaddr);
pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
}

6
arch/powerpc/platforms/85xx/socrates.c
View File

@ -102,10 +102,11 @@ static struct of_device_id __initdata socrates_of_bus_ids[] = {
{},
};
static void __init socrates_init(void)
static int __init socrates_publish_devices(void)
{
of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
}
machine_device_initcall(socrates, socrates_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@ -124,7 +125,6 @@ define_machine(socrates) {
.name = "Socrates",
.probe = socrates_probe,
.setup_arch = socrates_setup_arch,
.init = socrates_init,
.init_IRQ = socrates_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,

1
arch/powerpc/platforms/85xx/xes_mpc85xx.c
View File

@ -32,7 +32,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <linux/of_platform.h>
/* A few bit definitions needed for fixups on some boards */
#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */

30
arch/powerpc/platforms/cell/smp.c
View File

@ -36,7 +36,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@ -140,31 +139,6 @@ static void __devinit smp_cell_setup_cpu(int cpu)
mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
static DEFINE_SPINLOCK(timebase_lock);
static unsigned long timebase = 0;
static void __devinit cell_give_timebase(void)
{
spin_lock(&timebase_lock);
rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
timebase = get_tb();
spin_unlock(&timebase_lock);
while (timebase)
barrier();
rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
}
static void __devinit cell_take_timebase(void)
{
while (!timebase)
barrier();
spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
spin_unlock(&timebase_lock);
}
static void __devinit smp_cell_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@ -224,8 +198,8 @@ void __init smp_init_cell(void)
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
smp_ops->give_timebase = cell_give_timebase;
smp_ops->take_timebase = cell_take_timebase;
smp_ops->give_timebase = rtas_give_timebase;
smp_ops->take_timebase = rtas_take_timebase;
}
DBG(" <- smp_init_cell()\n");

33
arch/powerpc/platforms/chrp/smp.c
View File

@ -26,7 +26,6 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
@ -42,40 +41,12 @@ static void __devinit smp_chrp_setup_cpu(int cpu_nr)
mpic_setup_this_cpu();
}
static DEFINE_SPINLOCK(timebase_lock);
static unsigned int timebase_upper = 0, timebase_lower = 0;
void __devinit smp_chrp_give_timebase(void)
{
spin_lock(&timebase_lock);
rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
timebase_upper = get_tbu();
timebase_lower = get_tbl();
spin_unlock(&timebase_lock);
while (timebase_upper || timebase_lower)
barrier();
rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
}
void __devinit smp_chrp_take_timebase(void)
{
while (!(timebase_upper || timebase_lower))
barrier();
spin_lock(&timebase_lock);
set_tb(timebase_upper, timebase_lower);
timebase_upper = 0;
timebase_lower = 0;
spin_unlock(&timebase_lock);
printk("CPU %i taken timebase\n", smp_processor_id());
}
/* CHRP with openpic */
struct smp_ops_t chrp_smp_ops = {
.message_pass = smp_mpic_message_pass,
.probe = smp_mpic_probe,
.kick_cpu = smp_chrp_kick_cpu,
.setup_cpu = smp_chrp_setup_cpu,
.give_timebase = smp_chrp_give_timebase,
.take_timebase = smp_chrp_take_timebase,
.give_timebase = rtas_give_timebase,
.take_timebase = rtas_take_timebase,
};

15
arch/powerpc/platforms/pasemi/setup.c
View File

@ -71,20 +71,25 @@ static void pas_restart(char *cmd)
}
#ifdef CONFIG_SMP
static DEFINE_SPINLOCK(timebase_lock);
static raw_spinlock_t timebase_lock;
static unsigned long timebase;
static void __devinit pas_give_timebase(void)
{
spin_lock(&timebase_lock);
unsigned long flags;
local_irq_save(flags);
hard_irq_disable();
__raw_spin_lock(&timebase_lock);
mtspr(SPRN_TBCTL, TBCTL_FREEZE);
isync();
timebase = get_tb();
spin_unlock(&timebase_lock);
__raw_spin_unlock(&timebase_lock);
while (timebase)
barrier();
mtspr(SPRN_TBCTL, TBCTL_RESTART);
local_irq_restore(flags);
}
static void __devinit pas_take_timebase(void)
@ -92,10 +97,10 @@ static void __devinit pas_take_timebase(void)
while (!timebase)
smp_rmb();
spin_lock(&timebase_lock);
__raw_spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
spin_unlock(&timebase_lock);
__raw_spin_unlock(&timebase_lock);
}
struct smp_ops_t pas_smp_ops = {

41
arch/powerpc/platforms/powermac/setup.c
View File

@ -103,11 +103,6 @@ unsigned long smu_cmdbuf_abs;
EXPORT_SYMBOL(smu_cmdbuf_abs);
#endif
#ifdef CONFIG_SMP
extern struct smp_ops_t psurge_smp_ops;
extern struct smp_ops_t core99_smp_ops;
#endif /* CONFIG_SMP */
static void pmac_show_cpuinfo(struct seq_file *m)
{
struct device_node *np;
@ -341,34 +336,6 @@ static void __init pmac_setup_arch(void)
ROOT_DEV = DEFAULT_ROOT_DEVICE;
#endif
#ifdef CONFIG_SMP
/* Check for Core99 */
ic = of_find_node_by_name(NULL, "uni-n");
if (!ic)
ic = of_find_node_by_name(NULL, "u3");
if (!ic)
ic = of_find_node_by_name(NULL, "u4");
if (ic) {
of_node_put(ic);
smp_ops = &core99_smp_ops;
}
#ifdef CONFIG_PPC32
else {
/*
* We have to set bits in cpu_possible_map here since the
* secondary CPU(s) aren't in the device tree, and
* setup_per_cpu_areas only allocates per-cpu data for
* CPUs in the cpu_possible_map.
*/
int cpu;
for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
cpu_set(cpu, cpu_possible_map);
smp_ops = &psurge_smp_ops;
}
#endif
#endif /* CONFIG_SMP */
#ifdef CONFIG_ADB
if (strstr(cmd_line, "adb_sync")) {
extern int __adb_probe_sync;
@ -512,6 +479,14 @@ static void __init pmac_init_early(void)
#ifdef CONFIG_PPC64
iommu_init_early_dart();
#endif
/* SMP Init has to be done early as we need to patch up
* cpu_possible_map before interrupt stacks are allocated
* or kaboom...
*/
#ifdef CONFIG_SMP
pmac_setup_smp();
#endif
}
static int __init pmac_declare_of_platform_devices(void)

166
arch/powerpc/platforms/powermac/smp.c
View File

@ -64,10 +64,11 @@
extern void __secondary_start_pmac_0(void);
extern int pmac_pfunc_base_install(void);
#ifdef CONFIG_PPC32
static void (*pmac_tb_freeze)(int freeze);
static u64 timebase;
static int tb_req;
/* Sync flag for HW tb sync */
static volatile int sec_tb_reset = 0;
#ifdef CONFIG_PPC32
/*
* Powersurge (old powermac SMP) support.
@ -294,6 +295,9 @@ static int __init smp_psurge_probe(void)
psurge_quad_init();
/* All released cards using this HW design have 4 CPUs */
ncpus = 4;
/* No sure how timebase sync works on those, let's use SW */
smp_ops->give_timebase = smp_generic_give_timebase;
smp_ops->take_timebase = smp_generic_take_timebase;
} else {
iounmap(quad_base);
if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
@ -308,18 +312,15 @@ static int __init smp_psurge_probe(void)
psurge_start = ioremap(PSURGE_START, 4);
psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
/*
* This is necessary because OF doesn't know about the
/* This is necessary because OF doesn't know about the
* secondary cpu(s), and thus there aren't nodes in the
* device tree for them, and smp_setup_cpu_maps hasn't
* set their bits in cpu_possible_map and cpu_present_map.
* set their bits in cpu_present_map.
*/
if (ncpus > NR_CPUS)
ncpus = NR_CPUS;
for (i = 1; i < ncpus ; ++i) {
for (i = 1; i < ncpus ; ++i)
cpu_set(i, cpu_present_map);
set_hard_smp_processor_id(i, i);
}
if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
@ -329,8 +330,14 @@ static int __init smp_psurge_probe(void)
static void __init smp_psurge_kick_cpu(int nr)
{
unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
unsigned long a;
int i;
unsigned long a, flags;
int i, j;
/* Defining this here is evil ... but I prefer hiding that
* crap to avoid giving people ideas that they can do the
* same.
*/
extern volatile unsigned int cpu_callin_map[NR_CPUS];
/* may need to flush here if secondary bats aren't setup */
for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
@ -339,47 +346,52 @@ static void __init smp_psurge_kick_cpu(int nr)
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
/* This is going to freeze the timeebase, we disable interrupts */
local_irq_save(flags);
out_be32(psurge_start, start);
mb();
psurge_set_ipi(nr);
/*
* We can't use udelay here because the timebase is now frozen.
*/
for (i = 0; i < 2000; ++i)
barrier();
asm volatile("nop" : : : "memory");
psurge_clr_ipi(nr);
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
}
/*
* With the dual-cpu powersurge board, the decrementers and timebases
* of both cpus are frozen after the secondary cpu is started up,
* until we give the secondary cpu another interrupt. This routine
* uses this to get the timebases synchronized.
* -- paulus.
*/
static void __init psurge_dual_sync_tb(int cpu_nr)
{
int t;
set_dec(tb_ticks_per_jiffy);
/* XXX fixme */
set_tb(0, 0);
if (cpu_nr > 0) {
mb();
sec_tb_reset = 1;
return;
/*
* Also, because the timebase is frozen, we must not return to the
* caller which will try to do udelay's etc... Instead, we wait -here-
* for the CPU to callin.
*/
for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
for (j = 1; j < 10000; j++)
asm volatile("nop" : : : "memory");
asm volatile("sync" : : : "memory");
}
if (!cpu_callin_map[nr])
goto stuck;
/* wait for the secondary to have reset its TB before proceeding */
for (t = 10000000; t > 0 && !sec_tb_reset; --t)
;
/* And we do the TB sync here too for standard dual CPU cards */
if (psurge_type == PSURGE_DUAL) {
while(!tb_req)
barrier();
tb_req = 0;
mb();
timebase = get_tb();
mb();
while (timebase)
barrier();
mb();
}
stuck:
/* now interrupt the secondary, restarting both TBs */
if (psurge_type == PSURGE_DUAL)
psurge_set_ipi(1);
/* now interrupt the secondary, starting both TBs */
psurge_set_ipi(1);
if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
}
static struct irqaction psurge_irqaction = {
@ -390,36 +402,35 @@ static struct irqaction psurge_irqaction = {
static void __init smp_psurge_setup_cpu(int cpu_nr)
{
if (cpu_nr != 0)
return;
if (cpu_nr == 0) {
/* If we failed to start the second CPU, we should still
* send it an IPI to start the timebase & DEC or we might
* have them stuck.
*/
if (num_online_cpus() < 2) {
if (psurge_type == PSURGE_DUAL)
psurge_set_ipi(1);
return;
}
/* reset the entry point so if we get another intr we won't
* try to startup again */
out_be32(psurge_start, 0x100);
if (setup_irq(30, &psurge_irqaction))
printk(KERN_ERR "Couldn't get primary IPI interrupt");
}
if (psurge_type == PSURGE_DUAL)
psurge_dual_sync_tb(cpu_nr);
/* reset the entry point so if we get another intr we won't
* try to startup again */
out_be32(psurge_start, 0x100);
if (setup_irq(30, &psurge_irqaction))
printk(KERN_ERR "Couldn't get primary IPI interrupt");
}
void __init smp_psurge_take_timebase(void)
{
/* Dummy implementation */
if (psurge_type != PSURGE_DUAL)
return;
tb_req = 1;
mb();
while (!timebase)
barrier();
mb();
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
mb();
set_dec(tb_ticks_per_jiffy/2);
}
void __init smp_psurge_give_timebase(void)
{
/* Dummy implementation */
/* Nothing to do here */
}
/* PowerSurge-style Macs */
@ -437,9 +448,6 @@ struct smp_ops_t psurge_smp_ops = {
* Core 99 and later support
*/
static void (*pmac_tb_freeze)(int freeze);
static u64 timebase;
static int tb_req;
static void smp_core99_give_timebase(void)
{
@ -478,7 +486,6 @@ static void __devinit smp_core99_take_timebase(void)
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
mb();
set_dec(tb_ticks_per_jiffy/2);
local_irq_restore(flags);
}
@ -920,3 +927,34 @@ struct smp_ops_t core99_smp_ops = {
# endif
#endif
};
void __init pmac_setup_smp(void)
{
struct device_node *np;
/* Check for Core99 */
np = of_find_node_by_name(NULL, "uni-n");
if (!np)
np = of_find_node_by_name(NULL, "u3");
if (!np)
np = of_find_node_by_name(NULL, "u4");
if (np) {
of_node_put(np);
smp_ops = &core99_smp_ops;
}
#ifdef CONFIG_PPC32
else {
/* We have to set bits in cpu_possible_map here since the
* secondary CPU(s) aren't in the device tree. Various
* things won't be initialized for CPUs not in the possible
* map, so we really need to fix it up here.
*/
int cpu;
for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
cpu_set(cpu, cpu_possible_map);
smp_ops = &psurge_smp_ops;
}
#endif /* CONFIG_PPC32 */
}

30
arch/powerpc/platforms/pseries/smp.c
View File

@ -35,7 +35,6 @@
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/paca.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
@ -118,31 +117,6 @@ static void __devinit smp_xics_setup_cpu(int cpu)
}
#endif /* CONFIG_XICS */
static DEFINE_SPINLOCK(timebase_lock);
static unsigned long timebase = 0;
static void __devinit pSeries_give_timebase(void)
{
spin_lock(&timebase_lock);
rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
timebase = get_tb();
spin_unlock(&timebase_lock);
while (timebase)
barrier();
rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
}
static void __devinit pSeries_take_timebase(void)
{
while (!timebase)
barrier();
spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
spin_unlock(&timebase_lock);
}
static void __devinit smp_pSeries_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
@ -209,8 +183,8 @@ static void __init smp_init_pseries(void)
/* Non-lpar has additional take/give timebase */
if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
smp_ops->give_timebase = pSeries_give_timebase;
smp_ops->take_timebase = pSeries_take_timebase;
smp_ops->give_timebase = rtas_give_timebase;
smp_ops->take_timebase = rtas_take_timebase;
}
pr_debug(" <- smp_init_pSeries()\n");

34
arch/powerpc/sysdev/mpic.c
View File

@ -279,28 +279,29 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
}
#ifdef CONFIG_PPC_DCR
static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
const u32 *dbasep;
dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL);
dbasep = of_get_property(node, "dcr-reg", NULL);
rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size);
rb->dhost = dcr_map(node, *dbasep + offset, size);
BUG_ON(!DCR_MAP_OK(rb->dhost));
}
static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
struct mpic_reg_bank *rb, unsigned int offset,
unsigned int size)
static inline void mpic_map(struct mpic *mpic, struct device_node *node,
phys_addr_t phys_addr, struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
if (mpic->flags & MPIC_USES_DCR)
_mpic_map_dcr(mpic, rb, offset, size);
_mpic_map_dcr(mpic, node, rb, offset, size);
else
_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
}
#else /* CONFIG_PPC_DCR */
#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
#endif /* !CONFIG_PPC_DCR */
@ -1052,11 +1053,10 @@ struct mpic * __init mpic_alloc(struct device_node *node,
int intvec_top;
u64 paddr = phys_addr;
mpic = alloc_bootmem(sizeof(struct mpic));
mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
return NULL;
memset(mpic, 0, sizeof(struct mpic));
mpic->name = name;
mpic->hc_irq = mpic_irq_chip;
@ -1152,8 +1152,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
}
/* Map the global registers */
mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
/* Reset */
if (flags & MPIC_WANTS_RESET) {
@ -1194,7 +1194,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
mpic_map(mpic, paddr, &mpic->cpuregs[i],
mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
0x1000);
}
@ -1202,7 +1202,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
/* Initialize main ISU if none provided */
if (mpic->isu_size == 0) {
mpic->isu_size = mpic->num_sources;
mpic_map(mpic, paddr, &mpic->isus[0],
mpic_map(mpic, node, paddr, &mpic->isus[0],
MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
}
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@ -1256,8 +1256,10 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
BUG_ON(isu_num >= MPIC_MAX_ISU);
mpic_map(mpic, paddr, &mpic->isus[isu_num], 0,
mpic_map(mpic, mpic->irqhost->of_node,
paddr, &mpic->isus[isu_num], 0,
MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
if ((isu_first + mpic->isu_size) > mpic->num_sources)
mpic->num_sources = isu_first + mpic->isu_size;
}

9
arch/powerpc/sysdev/qe_lib/qe.c
View File

@ -112,6 +112,7 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
{
unsigned long flags;
u8 mcn_shift = 0, dev_shift = 0;
u32 ret;
spin_lock_irqsave(&qe_lock, flags);
if (cmd == QE_RESET) {
@ -139,11 +140,13 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
}
/* wait for the QE_CR_FLG to clear */
while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
cpu_relax();
ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
100, 0);
/* On timeout (e.g. failure), the expression will be false (ret == 0),
otherwise it will be true (ret == 1). */
spin_unlock_irqrestore(&qe_lock, flags);
return 0;
return ret == 1;
}
EXPORT_SYMBOL(qe_issue_cmd);

42
drivers/char/bsr.c
View File

@ -27,6 +27,7 @@
#include <linux/cdev.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <asm/pgtable.h>
#include <asm/io.h>
/*
@ -75,12 +76,13 @@ static struct class *bsr_class;
static int bsr_major;
enum {
BSR_8 = 0,
BSR_16 = 1,
BSR_64 = 2,
BSR_128 = 3,
BSR_UNKNOWN = 4,
BSR_MAX = 5,
BSR_8 = 0,
BSR_16 = 1,
BSR_64 = 2,
BSR_128 = 3,
BSR_4096 = 4,
BSR_UNKNOWN = 5,
BSR_MAX = 6,
};
static unsigned bsr_types[BSR_MAX];
@ -117,15 +119,22 @@ static int bsr_mmap(struct file *filp, struct vm_area_struct *vma)
{
unsigned long size = vma->vm_end - vma->vm_start;
struct bsr_dev *dev = filp->private_data;
int ret;
if (size > dev->bsr_len || (size & (PAGE_SIZE-1)))
return -EINVAL;
vma->vm_flags |= (VM_IO | VM_DONTEXPAND);
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT,
size, vma->vm_page_prot))
/* check for the case of a small BSR device and map one 4k page for it*/
if (dev->bsr_len < PAGE_SIZE && size == PAGE_SIZE)
ret = remap_4k_pfn(vma, vma->vm_start, dev->bsr_addr >> 12,
vma->vm_page_prot);
else if (size <= dev->bsr_len)
ret = io_remap_pfn_range(vma, vma->vm_start,
dev->bsr_addr >> PAGE_SHIFT,
size, vma->vm_page_prot);
else
return -EINVAL;
if (ret)
return -EAGAIN;
return 0;
@ -205,6 +214,11 @@ static int bsr_add_node(struct device_node *bn)
cur->bsr_stride = bsr_stride[i];
cur->bsr_dev = MKDEV(bsr_major, i + total_bsr_devs);
/* if we have a bsr_len of > 4k and less then PAGE_SIZE (64k pages) */
/* we can only map 4k of it, so only advertise the 4k in sysfs */
if (cur->bsr_len > 4096 && cur->bsr_len < PAGE_SIZE)
cur->bsr_len = 4096;
switch(cur->bsr_bytes) {
case 8:
cur->bsr_type = BSR_8;
@ -218,9 +232,11 @@ static int bsr_add_node(struct device_node *bn)
case 128:
cur->bsr_type = BSR_128;
break;
case 4096:
cur->bsr_type = BSR_4096;
break;
default:
cur->bsr_type = BSR_UNKNOWN;
printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes);
}
cur->bsr_num = bsr_types[cur->bsr_type];

11
drivers/macintosh/macio_asic.c
View File

@ -378,6 +378,17 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
dev->ofdev.dev.bus = &macio_bus_type;
dev->ofdev.dev.release = macio_release_dev;
#ifdef CONFIG_PCI
/* Set the DMA ops to the ones from the PCI device, this could be
* fishy if we didn't know that on PowerMac it's always direct ops
* or iommu ops that will work fine
*/
dev->ofdev.dev.archdata.dma_ops =
chip->lbus.pdev->dev.archdata.dma_ops;
dev->ofdev.dev.archdata.dma_data =
chip->lbus.pdev->dev.archdata.dma_data;
#endif /* CONFIG_PCI */
#ifdef DEBUG
printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj);

8
drivers/watchdog/wdrtas.c
View File

@ -218,16 +218,14 @@ static void wdrtas_timer_keepalive(void)
*/
static int wdrtas_get_temperature(void)
{
long result;
int result;
int temperature = 0;
result = rtas_call(wdrtas_token_get_sensor_state, 2, 2,
(void *)__pa(&temperature),
WDRTAS_THERMAL_SENSOR, 0);
result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature);
if (result < 0)
printk(KERN_WARNING "wdrtas: reading the thermal sensor "
"faild: %li\n", result);
"failed: %i\n", result);
else
temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */

5
scripts/dtc/.gitignore vendored Normal file
View File

@ -0,0 +1,5 @@
dtc
dtc-lexer.lex.c
dtc-parser.tab.c
dtc-parser.tab.h