forked from Minki/linux
regulator: mcp16502: add regulator driver for MCP16502
This patch adds a regulator driver for the MCP16502 PMIC. This drivers supports basic operations through the regulator interface such as: - setting/reading voltage - setting/reading operating mode - reading current status Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Andrei.Stefanescu@microchip.com
Mark Brown
parent
fef9f28a2e
commit
919261c03e
@ -567,6 +567,15 @@ config REGULATOR_MC13892
|
||||
Say y here to support the regulators found on the Freescale MC13892
|
||||
PMIC.
|
||||
|
||||
config REGULATOR_MCP16502
|
||||
tristate "Microchip MCP16502 PMIC"
|
||||
depends on I2C && OF
|
||||
help
|
||||
Say y here to support the MCP16502 PMIC. This driver supports
|
||||
basic operations (get/set voltage, get/set operating mode)
|
||||
through the regulator interface. In addition it enables
|
||||
suspend-to-ram/standby transition.
|
||||
|
||||
config REGULATOR_MT6311
|
||||
tristate "MediaTek MT6311 PMIC"
|
||||
depends on I2C
|
||||
|
||||
@ -74,6 +74,7 @@ obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
|
||||
obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
|
||||
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
|
||||
|
||||
520
drivers/regulator/mcp16502.c
Normal file
520
drivers/regulator/mcp16502.c
Normal file
@ -0,0 +1,520 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
//
|
||||
// MCP16502 PMIC driver
|
||||
//
|
||||
// Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
|
||||
//
|
||||
// Author: Andrei Stefanescu <andrei.stefanescu@microchip.com>
|
||||
//
|
||||
// Inspired from tps65086-regulator.c
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/suspend.h>
|
||||
|
||||
#define VDD_LOW_SEL 0x0D
|
||||
#define VDD_HIGH_SEL 0x3F
|
||||
|
||||
#define MCP16502_FLT BIT(7)
|
||||
#define MCP16502_ENS BIT(0)
|
||||
|
||||
/*
|
||||
* The PMIC has four sets of registers corresponding to four power modes:
|
||||
* Performance, Active, Low-power, Hibernate.
|
||||
*
|
||||
* Registers:
|
||||
* Each regulator has a register for each power mode. To access a register
|
||||
* for a specific regulator and mode BASE_* and OFFSET_* need to be added.
|
||||
*
|
||||
* Operating modes:
|
||||
* In order for the PMIC to transition to operating modes it has to be
|
||||
* controlled via GPIO lines called LPM and HPM.
|
||||
*
|
||||
* The registers are fully configurable such that you can put all regulators in
|
||||
* a low-power state while the PMIC is in Active mode. They are supposed to be
|
||||
* configured at startup and then simply transition to/from a global low-power
|
||||
* state by setting the GPIO lpm pin high/low.
|
||||
*
|
||||
* This driver keeps the PMIC in Active mode, Low-power state is set for the
|
||||
* regulators by enabling/disabling operating mode (FPWM or Auto PFM).
|
||||
*
|
||||
* The PMIC's Low-power and Hibernate modes are used during standby/suspend.
|
||||
* To enter standby/suspend the PMIC will go to Low-power mode. From there, it
|
||||
* will transition to Hibernate when the PWRHLD line is set to low by the MPU.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This function is useful for iterating over all regulators and accessing their
|
||||
* registers in a generic way or accessing a regulator device by its id.
|
||||
*/
|
||||
#define MCP16502_BASE(i) (((i) + 1) << 4)
|
||||
#define MCP16502_STAT_BASE(i) ((i) + 5)
|
||||
|
||||
#define MCP16502_OFFSET_MODE_A 0
|
||||
#define MCP16502_OFFSET_MODE_LPM 1
|
||||
#define MCP16502_OFFSET_MODE_HIB 2
|
||||
|
||||
#define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL
|
||||
#define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE
|
||||
#define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY
|
||||
|
||||
#define MCP16502_MODE_AUTO_PFM 0
|
||||
#define MCP16502_MODE_FPWM BIT(6)
|
||||
|
||||
#define MCP16502_VSEL 0x3F
|
||||
#define MCP16502_EN BIT(7)
|
||||
#define MCP16502_MODE BIT(6)
|
||||
|
||||
#define MCP16502_MIN_REG 0x0
|
||||
#define MCP16502_MAX_REG 0x65
|
||||
|
||||
static unsigned int mcp16502_of_map_mode(unsigned int mode)
|
||||
{
|
||||
if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE)
|
||||
return mode;
|
||||
|
||||
return REGULATOR_MODE_INVALID;
|
||||
}
|
||||
|
||||
#define MCP16502_REGULATOR(_name, _id, _ranges, _ops) \
|
||||
[_id] = { \
|
||||
.name = _name, \
|
||||
.regulators_node = of_match_ptr("regulators"), \
|
||||
.id = _id, \
|
||||
.ops = &(_ops), \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
.linear_ranges = _ranges, \
|
||||
.n_linear_ranges = ARRAY_SIZE(_ranges), \
|
||||
.of_match = of_match_ptr(_name), \
|
||||
.of_map_mode = mcp16502_of_map_mode, \
|
||||
.vsel_reg = (((_id) + 1) << 4), \
|
||||
.vsel_mask = MCP16502_VSEL, \
|
||||
.enable_reg = (((_id) + 1) << 4), \
|
||||
.enable_mask = MCP16502_EN, \
|
||||
}
|
||||
|
||||
enum {
|
||||
BUCK1 = 0,
|
||||
BUCK2,
|
||||
BUCK3,
|
||||
BUCK4,
|
||||
LDO1,
|
||||
LDO2,
|
||||
NUM_REGULATORS
|
||||
};
|
||||
|
||||
/*
|
||||
* struct mcp16502 - PMIC representation
|
||||
* @rdev: the regulators belonging to this chip
|
||||
* @rmap: regmap to be used for I2C communication
|
||||
* @lpm: LPM GPIO descriptor
|
||||
*/
|
||||
struct mcp16502 {
|
||||
struct regulator_dev *rdev[NUM_REGULATORS];
|
||||
struct regmap *rmap;
|
||||
struct gpio_desc *lpm;
|
||||
};
|
||||
|
||||
/*
|
||||
* mcp16502_gpio_set_mode() - set the GPIO corresponding value
|
||||
*
|
||||
* Used to prepare transitioning into hibernate or resuming from it.
|
||||
*/
|
||||
static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode)
|
||||
{
|
||||
switch (mode) {
|
||||
case MCP16502_OPMODE_ACTIVE:
|
||||
gpiod_set_value(mcp->lpm, 0);
|
||||
break;
|
||||
case MCP16502_OPMODE_LPM:
|
||||
case MCP16502_OPMODE_HIB:
|
||||
gpiod_set_value(mcp->lpm, 1);
|
||||
break;
|
||||
default:
|
||||
pr_err("%s: %d invalid\n", __func__, mode);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* mcp16502_get_reg() - get the PMIC's configuration register for opmode
|
||||
*
|
||||
* @rdev: the regulator whose register we are searching
|
||||
* @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate
|
||||
*/
|
||||
static int mcp16502_get_reg(struct regulator_dev *rdev, int opmode)
|
||||
{
|
||||
int reg = MCP16502_BASE(rdev_get_id(rdev));
|
||||
|
||||
switch (opmode) {
|
||||
case MCP16502_OPMODE_ACTIVE:
|
||||
return reg + MCP16502_OFFSET_MODE_A;
|
||||
case MCP16502_OPMODE_LPM:
|
||||
return reg + MCP16502_OFFSET_MODE_LPM;
|
||||
case MCP16502_OPMODE_HIB:
|
||||
return reg + MCP16502_OFFSET_MODE_HIB;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* mcp16502_get_mode() - return the current operating mode of a regulator
|
||||
*
|
||||
* Note: all functions that are not part of entering/exiting standby/suspend
|
||||
* use the Active mode registers.
|
||||
*
|
||||
* Note: this is different from the PMIC's operatig mode, it is the
|
||||
* MODE bit from the regulator's register.
|
||||
*/
|
||||
static unsigned int mcp16502_get_mode(struct regulator_dev *rdev)
|
||||
{
|
||||
unsigned int val;
|
||||
int ret, reg;
|
||||
struct mcp16502 *mcp = rdev_get_drvdata(rdev);
|
||||
|
||||
reg = mcp16502_get_reg(rdev, MCP16502_OPMODE_ACTIVE);
|
||||
if (reg < 0)
|
||||
return reg;
|
||||
|
||||
ret = regmap_read(mcp->rmap, reg, &val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
switch (val & MCP16502_MODE) {
|
||||
case MCP16502_MODE_FPWM:
|
||||
return REGULATOR_MODE_NORMAL;
|
||||
case MCP16502_MODE_AUTO_PFM:
|
||||
return REGULATOR_MODE_IDLE;
|
||||
default:
|
||||
return REGULATOR_MODE_INVALID;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* _mcp16502_set_mode() - helper for set_mode and set_suspend_mode
|
||||
*
|
||||
* @rdev: the regulator for which we are setting the mode
|
||||
* @mode: the regulator's mode (the one from MODE bit)
|
||||
* @opmode: the PMIC's operating mode: Active/Low-power/Hibernate
|
||||
*/
|
||||
static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode,
|
||||
unsigned int op_mode)
|
||||
{
|
||||
int val;
|
||||
int reg;
|
||||
struct mcp16502 *mcp = rdev_get_drvdata(rdev);
|
||||
|
||||
reg = mcp16502_get_reg(rdev, op_mode);
|
||||
if (reg < 0)
|
||||
return reg;
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
val = MCP16502_MODE_FPWM;
|
||||
break;
|
||||
case REGULATOR_MODE_IDLE:
|
||||
val = MCP16502_MODE_AUTO_PFM;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
reg = regmap_update_bits(mcp->rmap, reg, MCP16502_MODE, val);
|
||||
return reg;
|
||||
}
|
||||
|
||||
/*
|
||||
* mcp16502_set_mode() - regulator_ops set_mode
|
||||
*/
|
||||
static int mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
||||
{
|
||||
return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_ACTIVE);
|
||||
}
|
||||
|
||||
/*
|
||||
* mcp16502_get_status() - regulator_ops get_status
|
||||
*/
|
||||
static int mcp16502_get_status(struct regulator_dev *rdev)
|
||||
{
|
||||
int ret;
|
||||
unsigned int val;
|
||||
struct mcp16502 *mcp = rdev_get_drvdata(rdev);
|
||||
|
||||
ret = regmap_read(mcp->rmap, MCP16502_STAT_BASE(rdev_get_id(rdev)),
|
||||
&val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (val & MCP16502_FLT)
|
||||
return REGULATOR_STATUS_ERROR;
|
||||
else if (val & MCP16502_ENS)
|
||||
return REGULATOR_STATUS_ON;
|
||||
else if (!(val & MCP16502_ENS))
|
||||
return REGULATOR_STATUS_OFF;
|
||||
|
||||
return REGULATOR_STATUS_UNDEFINED;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SUSPEND
|
||||
/*
|
||||
* mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC
|
||||
* mode
|
||||
*/
|
||||
static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev)
|
||||
{
|
||||
switch (pm_suspend_target_state) {
|
||||
case PM_SUSPEND_STANDBY:
|
||||
return mcp16502_get_reg(rdev, MCP16502_OPMODE_LPM);
|
||||
case PM_SUSPEND_ON:
|
||||
case PM_SUSPEND_MEM:
|
||||
return mcp16502_get_reg(rdev, MCP16502_OPMODE_HIB);
|
||||
default:
|
||||
dev_err(&rdev->dev, "invalid suspend target: %d\n",
|
||||
pm_suspend_target_state);
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/*
|
||||
* mcp16502_set_suspend_voltage() - regulator_ops set_suspend_voltage
|
||||
*/
|
||||
static int mcp16502_set_suspend_voltage(struct regulator_dev *rdev, int uV)
|
||||
{
|
||||
struct mcp16502 *mcp = rdev_get_drvdata(rdev);
|
||||
int sel = regulator_map_voltage_linear_range(rdev, uV, uV);
|
||||
int reg = mcp16502_suspend_get_target_reg(rdev);
|
||||
|
||||
if (sel < 0)
|
||||
return sel;
|
||||
|
||||
if (reg < 0)
|
||||
return reg;
|
||||
|
||||
return regmap_update_bits(mcp->rmap, reg, MCP16502_VSEL, sel);
|
||||
}
|
||||
|
||||
/*
|
||||
* mcp16502_set_suspend_mode() - regulator_ops set_suspend_mode
|
||||
*/
|
||||
static int mcp16502_set_suspend_mode(struct regulator_dev *rdev,
|
||||
unsigned int mode)
|
||||
{
|
||||
switch (pm_suspend_target_state) {
|
||||
case PM_SUSPEND_STANDBY:
|
||||
return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_LPM);
|
||||
case PM_SUSPEND_ON:
|
||||
case PM_SUSPEND_MEM:
|
||||
return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_HIB);
|
||||
default:
|
||||
dev_err(&rdev->dev, "invalid suspend target: %d\n",
|
||||
pm_suspend_target_state);
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/*
|
||||
* mcp16502_set_suspend_enable() - regulator_ops set_suspend_enable
|
||||
*/
|
||||
static int mcp16502_set_suspend_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct mcp16502 *mcp = rdev_get_drvdata(rdev);
|
||||
int reg = mcp16502_suspend_get_target_reg(rdev);
|
||||
|
||||
if (reg < 0)
|
||||
return reg;
|
||||
|
||||
return regmap_update_bits(mcp->rmap, reg, MCP16502_EN, MCP16502_EN);
|
||||
}
|
||||
|
||||
/*
|
||||
* mcp16502_set_suspend_disable() - regulator_ops set_suspend_disable
|
||||
*/
|
||||
static int mcp16502_set_suspend_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct mcp16502 *mcp = rdev_get_drvdata(rdev);
|
||||
int reg = mcp16502_suspend_get_target_reg(rdev);
|
||||
|
||||
if (reg < 0)
|
||||
return reg;
|
||||
|
||||
return regmap_update_bits(mcp->rmap, reg, MCP16502_EN, 0);
|
||||
}
|
||||
#endif /* CONFIG_SUSPEND */
|
||||
|
||||
static const struct regulator_ops mcp16502_buck_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.map_voltage = regulator_map_voltage_linear_range,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.get_status = mcp16502_get_status,
|
||||
|
||||
.set_mode = mcp16502_set_mode,
|
||||
.get_mode = mcp16502_get_mode,
|
||||
|
||||
#ifdef CONFIG_SUSPEND
|
||||
.set_suspend_voltage = mcp16502_set_suspend_voltage,
|
||||
.set_suspend_mode = mcp16502_set_suspend_mode,
|
||||
.set_suspend_enable = mcp16502_set_suspend_enable,
|
||||
.set_suspend_disable = mcp16502_set_suspend_disable,
|
||||
#endif /* CONFIG_SUSPEND */
|
||||
};
|
||||
|
||||
/*
|
||||
* LDOs cannot change operating modes.
|
||||
*/
|
||||
static const struct regulator_ops mcp16502_ldo_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.map_voltage = regulator_map_voltage_linear_range,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.get_status = mcp16502_get_status,
|
||||
|
||||
#ifdef CONFIG_SUSPEND
|
||||
.set_suspend_voltage = mcp16502_set_suspend_voltage,
|
||||
.set_suspend_enable = mcp16502_set_suspend_enable,
|
||||
.set_suspend_disable = mcp16502_set_suspend_disable,
|
||||
#endif /* CONFIG_SUSPEND */
|
||||
};
|
||||
|
||||
static const struct of_device_id mcp16502_ids[] = {
|
||||
{ .compatible = "microchip,mcp16502", },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, mcp16502_ids);
|
||||
|
||||
static const struct regulator_linear_range b1l12_ranges[] = {
|
||||
REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000),
|
||||
};
|
||||
|
||||
static const struct regulator_linear_range b234_ranges[] = {
|
||||
REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000),
|
||||
};
|
||||
|
||||
static const struct regulator_desc mcp16502_desc[] = {
|
||||
/* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops) */
|
||||
MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops),
|
||||
MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops),
|
||||
MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops),
|
||||
MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops),
|
||||
MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops),
|
||||
MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops)
|
||||
};
|
||||
|
||||
static const struct regmap_range mcp16502_ranges[] = {
|
||||
regmap_reg_range(MCP16502_MIN_REG, MCP16502_MAX_REG)
|
||||
};
|
||||
|
||||
static const struct regmap_access_table mcp16502_yes_reg_table = {
|
||||
.yes_ranges = mcp16502_ranges,
|
||||
.n_yes_ranges = ARRAY_SIZE(mcp16502_ranges),
|
||||
};
|
||||
|
||||
static const struct regmap_config mcp16502_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = MCP16502_MAX_REG,
|
||||
.cache_type = REGCACHE_NONE,
|
||||
.rd_table = &mcp16502_yes_reg_table,
|
||||
.wr_table = &mcp16502_yes_reg_table,
|
||||
};
|
||||
|
||||
/*
|
||||
* set_up_regulators() - initialize all regulators
|
||||
*/
|
||||
static int setup_regulators(struct mcp16502 *mcp, struct device *dev,
|
||||
struct regulator_config config)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < NUM_REGULATORS; i++) {
|
||||
mcp->rdev[i] = devm_regulator_register(dev,
|
||||
&mcp16502_desc[i],
|
||||
&config);
|
||||
if (IS_ERR(mcp->rdev[i])) {
|
||||
dev_err(dev,
|
||||
"failed to register %s regulator %ld\n",
|
||||
mcp16502_desc[i].name, PTR_ERR(mcp->rdev[i]));
|
||||
return PTR_ERR(mcp->rdev[i]);
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mcp16502_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct regulator_config config = { };
|
||||
struct device *dev;
|
||||
struct mcp16502 *mcp;
|
||||
int ret = 0;
|
||||
|
||||
dev = &client->dev;
|
||||
config.dev = dev;
|
||||
|
||||
mcp = devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL);
|
||||
if (!mcp)
|
||||
return -ENOMEM;
|
||||
|
||||
mcp->rmap = devm_regmap_init_i2c(client, &mcp16502_regmap_config);
|
||||
if (IS_ERR(mcp->rmap)) {
|
||||
ret = PTR_ERR(mcp->rmap);
|
||||
dev_err(dev, "regmap init failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, mcp);
|
||||
config.regmap = mcp->rmap;
|
||||
config.driver_data = mcp;
|
||||
|
||||
mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(mcp->lpm)) {
|
||||
dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
|
||||
return PTR_ERR(mcp->lpm);
|
||||
}
|
||||
|
||||
ret = setup_regulators(mcp, dev, config);
|
||||
if (ret != 0)
|
||||
return ret;
|
||||
|
||||
mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id mcp16502_i2c_id[] = {
|
||||
{ "mcp16502", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id);
|
||||
|
||||
static struct i2c_driver mcp16502_drv = {
|
||||
.probe = mcp16502_probe,
|
||||
.driver = {
|
||||
.name = "mcp16502-regulator",
|
||||
.of_match_table = of_match_ptr(mcp16502_ids),
|
||||
},
|
||||
.id_table = mcp16502_i2c_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(mcp16502_drv);
|
||||
|
||||
MODULE_VERSION("1.0");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_DESCRIPTION("MCP16502 PMIC driver");
|
||||
MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com");
|
||||
Loading…
Reference in New Issue
Block a user