ARM: integrator: move flash registration to device tree

The flash on the Integrator was already defined by the device
tree, but VPP control and flash protection was in the
boardfiles. Simply add the compatible string
"arm,versatile-flash" and the special add-on code for flash
programming voltage and protection kicks in in the MTD
layer.

Remove the board file code and augment the device tree in
one go for seamless transition.

Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Linus Walleij 2016-01-26 11:09:22 +01:00
parent 7bb73fd719
commit 91011a7605
3 changed files with 2 additions and 114 deletions

View File

@ -52,8 +52,9 @@
};
flash@24000000 {
compatible = "cfi-flash";
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x24000000 0x02000000>;
bank-width = <4>;
};
fpga {

View File

@ -29,7 +29,6 @@
#include <linux/amba/kmi.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_data/clk-integrator.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
@ -146,65 +145,6 @@ static int __init irq_syscore_init(void)
device_initcall(irq_syscore_init);
/*
* Flash handling.
*/
static int ap_flash_init(struct platform_device *dev)
{
u32 tmp;
writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP,
ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) |
INTEGRATOR_EBI_WRITE_ENABLE;
writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
if (!(readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET)
& INTEGRATOR_EBI_WRITE_ENABLE)) {
writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
}
return 0;
}
static void ap_flash_exit(struct platform_device *dev)
{
u32 tmp;
writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP,
ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) &
~INTEGRATOR_EBI_WRITE_ENABLE;
writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
if (readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) &
INTEGRATOR_EBI_WRITE_ENABLE) {
writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
}
}
static void ap_flash_set_vpp(struct platform_device *pdev, int on)
{
if (on)
writel(INTEGRATOR_SC_CTRL_nFLVPPEN,
ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET);
else
writel(INTEGRATOR_SC_CTRL_nFLVPPEN,
ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
}
static struct physmap_flash_data ap_flash_data = {
.width = 4,
.init = ap_flash_init,
.exit = ap_flash_exit,
.set_vpp = ap_flash_set_vpp,
};
/*
* For the PL010 found in the Integrator/AP some of the UART control is
* implemented in the system controller and accessed using a callback
@ -266,8 +206,6 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
"kmi0", NULL),
OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
"kmi1", NULL),
OF_DEV_AUXDATA("cfi-flash", INTEGRATOR_FLASH_BASE,
"physmap-flash", &ap_flash_data),
{ /* sentinel */ },
};

View File

@ -23,7 +23,6 @@
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/gfp.h>
#include <linux/mtd/physmap.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@ -43,14 +42,8 @@
/* Base address to the CP controller */
static void __iomem *intcp_con_base;
#define INTCP_PA_FLASH_BASE 0x24000000
#define INTCP_PA_CLCD_BASE 0xc0000000
#define INTCP_FLASHPROG 0x04
#define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0)
#define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1)
/*
* Logical Physical
* f1000000 10000000 Core module registers
@ -107,48 +100,6 @@ static void __init intcp_map_io(void)
iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
}
/*
* Flash handling.
*/
static int intcp_flash_init(struct platform_device *dev)
{
u32 val;
val = readl(intcp_con_base + INTCP_FLASHPROG);
val |= CINTEGRATOR_FLASHPROG_FLWREN;
writel(val, intcp_con_base + INTCP_FLASHPROG);
return 0;
}
static void intcp_flash_exit(struct platform_device *dev)
{
u32 val;
val = readl(intcp_con_base + INTCP_FLASHPROG);
val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN);
writel(val, intcp_con_base + INTCP_FLASHPROG);
}
static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
{
u32 val;
val = readl(intcp_con_base + INTCP_FLASHPROG);
if (on)
val |= CINTEGRATOR_FLASHPROG_FLVPPEN;
else
val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN;
writel(val, intcp_con_base + INTCP_FLASHPROG);
}
static struct physmap_flash_data intcp_flash_data = {
.width = 4,
.init = intcp_flash_init,
.exit = intcp_flash_exit,
.set_vpp = intcp_flash_set_vpp,
};
/*
* It seems that the card insertion interrupt remains active after
* we've acknowledged it. We therefore ignore the interrupt, and
@ -260,8 +211,6 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
"aaci", &mmc_data),
OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
"clcd", &clcd_data),
OF_DEV_AUXDATA("cfi-flash", INTCP_PA_FLASH_BASE,
"physmap-flash", &intcp_flash_data),
{ /* sentinel */ },
};