forked from Minki/linux
Input: add support for Semtech SX8654 I2C touchscreen controller
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Sébastien Szymanski
Dmitry Torokhov
parent
771d8f1b17
commit
902cb3afab
@ -0,0 +1,16 @@
|
||||
* Semtech SX8654 I2C Touchscreen Controller
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "semtech,sx8654"
|
||||
- reg: i2c slave address
|
||||
- interrupt-parent: the phandle for the interrupt controller
|
||||
- interrupts: touch controller interrupt
|
||||
|
||||
Example:
|
||||
|
||||
sx8654@48 {
|
||||
compatible = "semtech,sx8654";
|
||||
reg = <0x48>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
@ -962,6 +962,17 @@ config TOUCHSCREEN_SUR40
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called sur40.
|
||||
|
||||
config TOUCHSCREEN_SX8654
|
||||
tristate "Semtech SX8654 touchscreen"
|
||||
depends on I2C
|
||||
help
|
||||
Say Y here if you have a Semtech SX8654 touchscreen controller.
|
||||
|
||||
If unsure, say N
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called sx8654.
|
||||
|
||||
config TOUCHSCREEN_TPS6507X
|
||||
tristate "TPS6507x based touchscreens"
|
||||
depends on I2C
|
||||
|
||||
@ -79,5 +79,6 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_SX8654) += sx8654.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
|
||||
obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
|
||||
|
||||
286
drivers/input/touchscreen/sx8654.c
Normal file
286
drivers/input/touchscreen/sx8654.c
Normal file
@ -0,0 +1,286 @@
|
||||
/*
|
||||
* Driver for Semtech SX8654 I2C touchscreen controller.
|
||||
*
|
||||
* Copyright (c) 2015 Armadeus Systems
|
||||
* Sébastien Szymanski <sebastien.szymanski@armadeus.com>
|
||||
*
|
||||
* Using code from:
|
||||
* - sx865x.c
|
||||
* Copyright (c) 2013 U-MoBo Srl
|
||||
* Pierluigi Passaro <p.passaro@u-mobo.com>
|
||||
* - sx8650.c
|
||||
* Copyright (c) 2009 Wayne Roberts
|
||||
* - tsc2007.c
|
||||
* Copyright (c) 2008 Kwangwoo Lee
|
||||
* - ads7846.c
|
||||
* Copyright (c) 2005 David Brownell
|
||||
* Copyright (c) 2006 Nokia Corporation
|
||||
* - corgi_ts.c
|
||||
* Copyright (C) 2004-2005 Richard Purdie
|
||||
* - omap_ts.[hc], ads7846.h, ts_osk.c
|
||||
* Copyright (C) 2002 MontaVista Software
|
||||
* Copyright (C) 2004 Texas Instruments
|
||||
* Copyright (C) 2005 Dirk Behme
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/input.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
|
||||
/* register addresses */
|
||||
#define I2C_REG_TOUCH0 0x00
|
||||
#define I2C_REG_TOUCH1 0x01
|
||||
#define I2C_REG_CHANMASK 0x04
|
||||
#define I2C_REG_IRQMASK 0x22
|
||||
#define I2C_REG_IRQSRC 0x23
|
||||
#define I2C_REG_SOFTRESET 0x3f
|
||||
|
||||
/* commands */
|
||||
#define CMD_READ_REGISTER 0x40
|
||||
#define CMD_MANUAL 0xc0
|
||||
#define CMD_PENTRG 0xe0
|
||||
|
||||
/* value for I2C_REG_SOFTRESET */
|
||||
#define SOFTRESET_VALUE 0xde
|
||||
|
||||
/* bits for I2C_REG_IRQSRC */
|
||||
#define IRQ_PENTOUCH_TOUCHCONVDONE 0x08
|
||||
#define IRQ_PENRELEASE 0x04
|
||||
|
||||
/* bits for RegTouch1 */
|
||||
#define CONDIRQ 0x20
|
||||
#define FILT_7SA 0x03
|
||||
|
||||
/* bits for I2C_REG_CHANMASK */
|
||||
#define CONV_X 0x80
|
||||
#define CONV_Y 0x40
|
||||
|
||||
/* coordinates rate: higher nibble of CTRL0 register */
|
||||
#define RATE_MANUAL 0x00
|
||||
#define RATE_5000CPS 0xf0
|
||||
|
||||
/* power delay: lower nibble of CTRL0 register */
|
||||
#define POWDLY_1_1MS 0x0b
|
||||
|
||||
#define MAX_12BIT ((1 << 12) - 1)
|
||||
|
||||
struct sx8654 {
|
||||
struct input_dev *input;
|
||||
struct i2c_client *client;
|
||||
};
|
||||
|
||||
static irqreturn_t sx8654_irq(int irq, void *handle)
|
||||
{
|
||||
struct sx8654 *sx8654 = handle;
|
||||
u8 irqsrc;
|
||||
u8 data[4];
|
||||
unsigned int x, y;
|
||||
int retval;
|
||||
|
||||
irqsrc = i2c_smbus_read_byte_data(sx8654->client,
|
||||
CMD_READ_REGISTER | I2C_REG_IRQSRC);
|
||||
dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc);
|
||||
|
||||
if (irqsrc < 0)
|
||||
goto out;
|
||||
|
||||
if (irqsrc & IRQ_PENRELEASE) {
|
||||
dev_dbg(&sx8654->client->dev, "pen release interrupt");
|
||||
|
||||
input_report_key(sx8654->input, BTN_TOUCH, 0);
|
||||
input_sync(sx8654->input);
|
||||
}
|
||||
|
||||
if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) {
|
||||
dev_dbg(&sx8654->client->dev, "pen touch interrupt");
|
||||
|
||||
retval = i2c_master_recv(sx8654->client, data, sizeof(data));
|
||||
if (retval != sizeof(data))
|
||||
goto out;
|
||||
|
||||
/* invalid data */
|
||||
if (unlikely(data[0] & 0x80 || data[2] & 0x80))
|
||||
goto out;
|
||||
|
||||
x = ((data[0] & 0xf) << 8) | (data[1]);
|
||||
y = ((data[2] & 0xf) << 8) | (data[3]);
|
||||
|
||||
input_report_abs(sx8654->input, ABS_X, x);
|
||||
input_report_abs(sx8654->input, ABS_Y, y);
|
||||
input_report_key(sx8654->input, BTN_TOUCH, 1);
|
||||
input_sync(sx8654->input);
|
||||
|
||||
dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y);
|
||||
}
|
||||
|
||||
out:
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int sx8654_open(struct input_dev *dev)
|
||||
{
|
||||
struct sx8654 *sx8654 = input_get_drvdata(dev);
|
||||
struct i2c_client *client = sx8654->client;
|
||||
int error;
|
||||
|
||||
/* enable pen trigger mode */
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0,
|
||||
RATE_5000CPS | POWDLY_1_1MS);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = i2c_smbus_write_byte(client, CMD_PENTRG);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing command CMD_PENTRG failed");
|
||||
return error;
|
||||
}
|
||||
|
||||
enable_irq(client->irq);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sx8654_close(struct input_dev *dev)
|
||||
{
|
||||
struct sx8654 *sx8654 = input_get_drvdata(dev);
|
||||
struct i2c_client *client = sx8654->client;
|
||||
int error;
|
||||
|
||||
disable_irq(client->irq);
|
||||
|
||||
/* enable manual mode mode */
|
||||
error = i2c_smbus_write_byte(client, CMD_MANUAL);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing command CMD_MANUAL failed");
|
||||
return;
|
||||
}
|
||||
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
static int sx8654_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct sx8654 *sx8654;
|
||||
struct input_dev *input;
|
||||
int error;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter,
|
||||
I2C_FUNC_SMBUS_READ_WORD_DATA))
|
||||
return -ENXIO;
|
||||
|
||||
sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL);
|
||||
if (!sx8654)
|
||||
return -ENOMEM;
|
||||
|
||||
input = devm_input_allocate_device(&client->dev);
|
||||
if (!sx8654)
|
||||
return -ENOMEM;
|
||||
|
||||
input->name = "SX8654 I2C Touchscreen";
|
||||
input->id.bustype = BUS_I2C;
|
||||
input->dev.parent = &client->dev;
|
||||
input->open = sx8654_open;
|
||||
input->close = sx8654_close;
|
||||
|
||||
__set_bit(INPUT_PROP_DIRECT, input->propbit);
|
||||
input_set_capability(input, EV_KEY, BTN_TOUCH);
|
||||
input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
|
||||
input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
|
||||
|
||||
sx8654->client = client;
|
||||
sx8654->input = input;
|
||||
|
||||
input_set_drvdata(sx8654->input, sx8654);
|
||||
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
|
||||
SOFTRESET_VALUE);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing softreset value failed");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
|
||||
CONV_X | CONV_Y);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
|
||||
IRQ_PENTOUCH_TOUCHCONVDONE |
|
||||
IRQ_PENRELEASE);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
|
||||
CONDIRQ | FILT_7SA);
|
||||
if (error) {
|
||||
dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
|
||||
return error;
|
||||
}
|
||||
|
||||
error = devm_request_threaded_irq(&client->dev, client->irq,
|
||||
NULL, sx8654_irq,
|
||||
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
||||
client->name, sx8654);
|
||||
if (error) {
|
||||
dev_err(&client->dev,
|
||||
"Failed to enable IRQ %d, error: %d\n",
|
||||
client->irq, error);
|
||||
return error;
|
||||
}
|
||||
|
||||
/* Disable the IRQ, we'll enable it in sx8654_open() */
|
||||
disable_irq(client->irq);
|
||||
|
||||
error = input_register_device(sx8654->input);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
i2c_set_clientdata(client, sx8654);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id sx8654_of_match[] = {
|
||||
{ .compatible = "semtech,sx8654", },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, sx8654_of_match);
|
||||
#endif
|
||||
|
||||
static const struct i2c_device_id sx8654_id_table[] = {
|
||||
{ "semtech_sx8654", 0 },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
|
||||
|
||||
static struct i2c_driver sx8654_driver = {
|
||||
.driver = {
|
||||
.name = "sx8654",
|
||||
.of_match_table = of_match_ptr(sx8654_of_match),
|
||||
},
|
||||
.id_table = sx8654_id_table,
|
||||
.probe = sx8654_probe,
|
||||
};
|
||||
module_i2c_driver(sx8654_driver);
|
||||
|
||||
MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>");
|
||||
MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user