forked from Minki/linux
watchdog: sch311x_wdt.c: Remove RESGEN
The SCH311x chip contains 2 watchdogs. One is the watchdog programmable by the runtime register at address 0x65-0x68, the other is the watchdog inside the power on reset generator. This second watchdog has a fixed timeout value of ~1.6 seconds and is configurable only by the RESGEN register. The BIOS normally takes care of the RESGEN watchdog and disables it (at least) before the OS is booted. Unfortunately the sch311x_wdt driver clears bit 0 of the RESGEN register which has the effect that at the latest 1.6 seconds later, a POR is triggered. The attached patch fixes this problem by completely removing any reference to the RESGEN watchdog from the sch311x_wdt driver. Signed-off-by: Dave Mueller <d.mueller@elsoft.ch> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
parent
3016a552a8
commit
8f90a3ae8f
@ -41,7 +41,6 @@
|
||||
#define DRV_NAME "sch311x_wdt"
|
||||
|
||||
/* Runtime registers */
|
||||
#define RESGEN 0x1d
|
||||
#define GP60 0x47
|
||||
#define WDT_TIME_OUT 0x65
|
||||
#define WDT_VAL 0x66
|
||||
@ -69,10 +68,6 @@ static unsigned short force_id;
|
||||
module_param(force_id, ushort, 0);
|
||||
MODULE_PARM_DESC(force_id, "Override the detected device ID");
|
||||
|
||||
static unsigned short therm_trip;
|
||||
module_param(therm_trip, ushort, 0);
|
||||
MODULE_PARM_DESC(therm_trip, "Should a ThermTrip trigger the reset generator");
|
||||
|
||||
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
|
||||
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
|
||||
module_param(timeout, int, 0);
|
||||
@ -358,26 +353,16 @@ static struct miscdevice sch311x_wdt_miscdev = {
|
||||
static int __devinit sch311x_wdt_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
unsigned char val;
|
||||
int err;
|
||||
|
||||
spin_lock_init(&sch311x_wdt_data.io_lock);
|
||||
|
||||
if (!request_region(sch311x_wdt_data.runtime_reg + RESGEN, 1,
|
||||
DRV_NAME)) {
|
||||
dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
|
||||
sch311x_wdt_data.runtime_reg + RESGEN,
|
||||
sch311x_wdt_data.runtime_reg + RESGEN);
|
||||
err = -EBUSY;
|
||||
goto exit;
|
||||
}
|
||||
|
||||
if (!request_region(sch311x_wdt_data.runtime_reg + GP60, 1, DRV_NAME)) {
|
||||
dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
|
||||
sch311x_wdt_data.runtime_reg + GP60,
|
||||
sch311x_wdt_data.runtime_reg + GP60);
|
||||
err = -EBUSY;
|
||||
goto exit_release_region;
|
||||
goto exit;
|
||||
}
|
||||
|
||||
if (!request_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4,
|
||||
@ -386,7 +371,7 @@ static int __devinit sch311x_wdt_probe(struct platform_device *pdev)
|
||||
sch311x_wdt_data.runtime_reg + WDT_TIME_OUT,
|
||||
sch311x_wdt_data.runtime_reg + WDT_CTRL);
|
||||
err = -EBUSY;
|
||||
goto exit_release_region2;
|
||||
goto exit_release_region;
|
||||
}
|
||||
|
||||
/* Make sure that the watchdog is not running */
|
||||
@ -414,24 +399,13 @@ static int __devinit sch311x_wdt_probe(struct platform_device *pdev)
|
||||
/* Get status at boot */
|
||||
sch311x_wdt_get_status(&sch311x_wdt_data.boot_status);
|
||||
|
||||
/* enable watchdog */
|
||||
/* -- Reset Generator --
|
||||
* Bit 0 Enable Watchdog Timer Generation: 0* = Enabled, 1 = Disabled
|
||||
* Bit 1 Thermtrip Source Select: O* = No Source, 1 = Source
|
||||
* Bit 2 WDT2_CTL: WDT input bit
|
||||
* Bit 3-7 Reserved
|
||||
*/
|
||||
outb(0, sch311x_wdt_data.runtime_reg + RESGEN);
|
||||
val = therm_trip ? 0x06 : 0x04;
|
||||
outb(val, sch311x_wdt_data.runtime_reg + RESGEN);
|
||||
|
||||
sch311x_wdt_miscdev.parent = dev;
|
||||
|
||||
err = misc_register(&sch311x_wdt_miscdev);
|
||||
if (err != 0) {
|
||||
dev_err(dev, "cannot register miscdev on minor=%d (err=%d)\n",
|
||||
WATCHDOG_MINOR, err);
|
||||
goto exit_release_region3;
|
||||
goto exit_release_region2;
|
||||
}
|
||||
|
||||
dev_info(dev,
|
||||
@ -440,12 +414,10 @@ static int __devinit sch311x_wdt_probe(struct platform_device *pdev)
|
||||
|
||||
return 0;
|
||||
|
||||
exit_release_region3:
|
||||
release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4);
|
||||
exit_release_region2:
|
||||
release_region(sch311x_wdt_data.runtime_reg + GP60, 1);
|
||||
release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4);
|
||||
exit_release_region:
|
||||
release_region(sch311x_wdt_data.runtime_reg + RESGEN, 1);
|
||||
release_region(sch311x_wdt_data.runtime_reg + GP60, 1);
|
||||
sch311x_wdt_data.runtime_reg = 0;
|
||||
exit:
|
||||
return err;
|
||||
@ -461,7 +433,6 @@ static int __devexit sch311x_wdt_remove(struct platform_device *pdev)
|
||||
misc_deregister(&sch311x_wdt_miscdev);
|
||||
release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4);
|
||||
release_region(sch311x_wdt_data.runtime_reg + GP60, 1);
|
||||
release_region(sch311x_wdt_data.runtime_reg + RESGEN, 1);
|
||||
sch311x_wdt_data.runtime_reg = 0;
|
||||
return 0;
|
||||
}
|
||||
|
Loading…
Reference in New Issue
Block a user