Merge branch 'drm-intel-fixes' into drm-intel-next

Documentation/power/devices.txt

@@ -520,59 +520,20 @@ Support for power domains is provided through the pwr_domain field of struct
 device.  This field is a pointer to an object of type struct dev_power_domain,
 defined in include/linux/pm.h, providing a set of power management callbacks
 analogous to the subsystem-level and device driver callbacks that are executed
-for the given device during all power transitions, in addition to the respective
+for the given device during all power transitions, instead of the respective
-subsystem-level callbacks.  Specifically, the power domain "suspend" callbacks
+subsystem-level callbacks.  Specifically, if a device's pm_domain pointer is
-(i.e. ->runtime_suspend(), ->suspend(), ->freeze(), ->poweroff(), etc.) are
+not NULL, the ->suspend() callback from the object pointed to by it will be
-executed after the analogous subsystem-level callbacks, while the power domain
+executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and
-"resume" callbacks (i.e. ->runtime_resume(), ->resume(), ->thaw(), ->restore,
+anlogously for all of the remaining callbacks.  In other words, power management
-etc.) are executed before the analogous subsystem-level callbacks.  Error codes
+domain callbacks, if defined for the given device, always take precedence over
-returned by the "suspend" and "resume" power domain callbacks are ignored.
+the callbacks provided by the device's subsystem (e.g. bus type).
 
-Power domain ->runtime_idle() callback is executed before the subsystem-level
+The support for device power management domains is only relevant to platforms
-->runtime_idle() callback and the result returned by it is not ignored.  Namely,
+needing to use the same device driver power management callbacks in many
-if it returns error code, the subsystem-level ->runtime_idle() callback will not
+different power domain configurations and wanting to avoid incorporating the
-be called and the helper function rpm_idle() executing it will return error
+support for power domains into subsystem-level callbacks, for example by
-code.  This mechanism is intended to help platforms where saving device state
+modifying the platform bus type.  Other platforms need not implement it or take
-is a time consuming operation and should only be carried out if all devices
+it into account in any way.
-in the power domain are idle, before turning off the shared power resource(s).
-Namely, the power domain ->runtime_idle() callback may return error code until
-the pm_runtime_idle() helper (or its asychronous version) has been called for
-all devices in the power domain (it is recommended that the returned error code
-be -EBUSY in those cases), preventing the subsystem-level ->runtime_idle()
-callback from being run prematurely.
-
-The support for device power domains is only relevant to platforms needing to
-use the same subsystem-level (e.g. platform bus type) and device driver power
-management callbacks in many different power domain configurations and wanting
-to avoid incorporating the support for power domains into the subsystem-level
-callbacks.  The other platforms need not implement it or take it into account
-in any way.
-
-
-System Devices
---------------
-System devices (sysdevs) follow a slightly different API, which can be found in
-
-	include/linux/sysdev.h
-	drivers/base/sys.c
-
-System devices will be suspended with interrupts disabled, and after all other
-devices have been suspended.  On resume, they will be resumed before any other
-devices, and also with interrupts disabled.  These things occur in special
-"sysdev_driver" phases, which affect only system devices.
-
-Thus, after the suspend_noirq (or freeze_noirq or poweroff_noirq) phase, when
-the non-boot CPUs are all offline and IRQs are disabled on the remaining online
-CPU, then a sysdev_driver.suspend phase is carried out, and the system enters a
-sleep state (or a system image is created).  During resume (or after the image
-has been created or loaded) a sysdev_driver.resume phase is carried out, IRQs
-are enabled on the only online CPU, the non-boot CPUs are enabled, and the
-resume_noirq (or thaw_noirq or restore_noirq) phase begins.
-
-Code to actually enter and exit the system-wide low power state sometimes
-involves hardware details that are only known to the boot firmware, and
-may leave a CPU running software (from SRAM or flash memory) that monitors
-the system and manages its wakeup sequence.
 
 
 Device Low Power (suspend) States

Documentation/power/runtime_pm.txt

@@ -566,11 +566,6 @@ to do this is:
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
-The PM core always increments the run-time usage counter before calling the
-->prepare() callback and decrements it after calling the ->complete() callback.
-Hence disabling run-time PM temporarily like this will not cause any run-time
-suspend callbacks to be lost.
-
 7. Generic subsystem callbacks
 
 Subsystems may wish to conserve code space by using the set of generic power

Documentation/usb/error-codes.txt

@@ -76,6 +76,13 @@ A transfer's actual_length may be positive even when an error has been
 reported.  That's because transfers often involve several packets, so that
 one or more packets could finish before an error stops further endpoint I/O.
 
+For isochronous URBs, the urb status value is non-zero only if the URB is
+unlinked, the device is removed, the host controller is disabled, or the total
+transferred length is less than the requested length and the URB_SHORT_NOT_OK
+flag is set.  Completion handlers for isochronous URBs should only see
+urb->status set to zero, -ENOENT, -ECONNRESET, -ESHUTDOWN, or -EREMOTEIO.
+Individual frame descriptor status fields may report more status codes.
+
 
 0			Transfer completed successfully
 
@@ -132,7 +139,7 @@ one or more packets could finish before an error stops further endpoint I/O.
 			device removal events immediately.
 
 -EXDEV			ISO transfer only partially completed
-			look at individual frame status for details
+			(only set in iso_frame_desc[n].status, not urb->status)
 
 -EINVAL			ISO madness, if this happens: Log off and go home
 

MAINTAINERS

@@ -6434,8 +6434,9 @@ S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
@@ -6465,6 +6466,12 @@ S:	Maintained
 F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
+USB/IP DRIVERS
+M:	Matt Mooney <mfm@muteddisk.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/usbip/
+
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
@@ -6494,8 +6501,9 @@ S:	Maintained
 F:	sound/usb/midi.*
 
 USB OHCI DRIVER
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*

arch/alpha/include/asm/mmzone.h

@@ -56,7 +56,6 @@ PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
  * Given a kernel address, find the home node of the underlying memory.
  */
 #define kvaddr_to_nid(kaddr)	pa_to_nid(__pa(kaddr))
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
 
 /*
  * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory

arch/arm/boot/compressed/head.S

@@ -597,6 +597,8 @@ __common_mmu_cache_on:
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
 #endif
 
+#define PROC_ENTRY_SIZE (4*5)
+
 /*
  * Here follow the relocatable cache support functions for the
  * various processors.  This is a generic hook for locating an
@@ -624,7 +626,7 @@ call_cache_fn:	adr	r12, proc_types
  ARM(		addeq	pc, r12, r3		) @ call cache function
  THUMB(		addeq	r12, r3			)
  THUMB(		moveq	pc, r12			) @ call cache function
-		add	r12, r12, #4*5
+		add	r12, r12, #PROC_ENTRY_SIZE
 		b	1b
 
 /*
@@ -794,6 +796,16 @@ proc_types:
 
 		.size	proc_types, . - proc_types
 
+		/*
+		 * If you get a "non-constant expression in ".if" statement"
+		 * error from the assembler on this line, check that you have
+		 * not accidentally written a "b" instruction where you should
+		 * have written W(b).
+		 */
+		.if (. - proc_types) % PROC_ENTRY_SIZE != 0
+		.error "The size of one or more proc_types entries is wrong."
+		.endif
+
 /*
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.

arch/arm/include/asm/assembler.h

@@ -13,6 +13,9 @@
  *  Do not include any C declarations in this file - it is included by
  *  assembler source.
  */
+#ifndef __ASM_ASSEMBLER_H__
+#define __ASM_ASSEMBLER_H__
+
 #ifndef __ASSEMBLY__
 #error "Only include this from assembly code"
 #endif
@@ -290,3 +293,4 @@
 	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
 	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
 	.endm
+#endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/entry-macro-multi.S

@@ -1,3 +1,5 @@
+#include <asm/assembler.h>
+
 /*
  * Interrupt handling.  Preserves r7, r8, r9
  */

arch/arm/kernel/module.c

@@ -193,8 +193,17 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 				offset -= 0x02000000;
 			offset += sym->st_value - loc;
 
-			/* only Thumb addresses allowed (no interworking) */
+			/*
-			if (!(offset & 1) ||
+			 * For function symbols, only Thumb addresses are
+			 * allowed (no interworking).
+			 *
+			 * For non-function symbols, the destination
+			 * has no specific ARM/Thumb disposition, so
+			 * the branch is resolved under the assumption
+			 * that interworking is not required.
+			 */
+			if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC &&
+				!(offset & 1)) ||
 			    offset <= (s32)0xff000000 ||
 			    offset >= (s32)0x01000000) {
 				pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",

arch/arm/kernel/smp.c

@@ -318,9 +318,13 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	smp_store_cpu_info(cpu);
 
 	/*
-	 * OK, now it's safe to let the boot CPU continue
+	 * OK, now it's safe to let the boot CPU continue.  Wait for
+	 * the CPU migration code to notice that the CPU is online
+	 * before we continue.
 	 */
 	set_cpu_online(cpu, true);
+	while (!cpu_active(cpu))
+		cpu_relax();
 
 	/*
 	 * OK, it's off to the idle thread for us

arch/arm/mach-exynos4/init.c

@@ -35,6 +35,7 @@ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 			tcfg->clocks = exynos4_serial_clocks;
 			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
 		}
+		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
 	}
 
 	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);

arch/arm/mach-h720x/Kconfig

@@ -6,12 +6,14 @@ config ARCH_H7201
 	bool "gms30c7201"
 	depends on ARCH_H720X
 	select CPU_H7201
+	select ZONE_DMA
 	help
 	  Say Y here if you are using the Hynix GMS30C7201 Reference Board
 
 config ARCH_H7202
 	bool "hms30c7202"
 	select CPU_H7202
+	select ZONE_DMA
 	depends on ARCH_H720X
 	help
 	  Say Y here if you are using the Hynix HMS30C7202 Reference Board

arch/arm/mach-ux500/board-mop500-pins.c

@@ -110,10 +110,18 @@ static pin_cfg_t mop500_pins_common[] = {
 	GPIO168_KP_O0,
 
 	/* UART */
-	GPIO0_U0_CTSn	| PIN_INPUT_PULLUP,
+	/* uart-0 pins gpio configuration should be
-	GPIO1_U0_RTSn	| PIN_OUTPUT_HIGH,
+	 * kept intact to prevent glitch in tx line
-	GPIO2_U0_RXD	| PIN_INPUT_PULLUP,
+	 * when tty dev is opened. Later these pins
-	GPIO3_U0_TXD	| PIN_OUTPUT_HIGH,
+	 * are configured to uart mop500_pins_uart0
+	 *
+	 * It will be replaced with uart configuration
+	 * once the issue is solved.
+	 */
+	GPIO0_GPIO	| PIN_INPUT_PULLUP,
+	GPIO1_GPIO	| PIN_OUTPUT_HIGH,
+	GPIO2_GPIO	| PIN_INPUT_PULLUP,
+	GPIO3_GPIO	| PIN_OUTPUT_HIGH,
 
 	GPIO29_U2_RXD	| PIN_INPUT_PULLUP,
 	GPIO30_U2_TXD	| PIN_OUTPUT_HIGH,

arch/arm/mach-ux500/board-mop500.c

@@ -27,18 +27,21 @@
 #include <linux/leds-lp5521.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/delay.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
+#include <plat/pincfg.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
 
+#include "pins-db8500.h"
 #include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
@@ -393,12 +396,63 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
+
+static pin_cfg_t mop500_pins_uart0[] = {
+	GPIO0_U0_CTSn   | PIN_INPUT_PULLUP,
+	GPIO1_U0_RTSn   | PIN_OUTPUT_HIGH,
+	GPIO2_U0_RXD    | PIN_INPUT_PULLUP,
+	GPIO3_U0_TXD    | PIN_OUTPUT_HIGH,
+};
+
+#define PRCC_K_SOFTRST_SET      0x18
+#define PRCC_K_SOFTRST_CLEAR    0x1C
+static void ux500_uart0_reset(void)
+{
+	void __iomem *prcc_rst_set, *prcc_rst_clr;
+
+	prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+			PRCC_K_SOFTRST_SET);
+	prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+			PRCC_K_SOFTRST_CLEAR);
+
+	/* Activate soft reset PRCC_K_SOFTRST_CLEAR */
+	writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
+	udelay(1);
+
+	/* Release soft reset PRCC_K_SOFTRST_SET */
+	writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
+	udelay(1);
+}
+
+static void ux500_uart0_init(void)
+{
+	int ret;
+
+	ret = nmk_config_pins(mop500_pins_uart0,
+			ARRAY_SIZE(mop500_pins_uart0));
+	if (ret < 0)
+		pr_err("pl011: uart pins_enable failed\n");
+}
+
+static void ux500_uart0_exit(void)
+{
+	int ret;
+
+	ret = nmk_config_pins_sleep(mop500_pins_uart0,
+			ARRAY_SIZE(mop500_pins_uart0));
+	if (ret < 0)
+		pr_err("pl011: uart pins_disable failed\n");
+}
+
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
 	.dma_filter = stedma40_filter,
 	.dma_rx_param = &uart0_dma_cfg_rx,
 	.dma_tx_param = &uart0_dma_cfg_tx,
 #endif
+	.init = ux500_uart0_init,
+	.exit = ux500_uart0_exit,
+	.reset = ux500_uart0_reset,
 };
 
 static struct amba_pl011_data uart1_plat = {

arch/arm/mm/proc-v7.S

@@ -210,19 +210,21 @@ cpu_v7_name:
 
 /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
 .globl	cpu_v7_suspend_size
-.equ	cpu_v7_suspend_size, 4 * 8
+.equ	cpu_v7_suspend_size, 4 * 9
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_v7_do_suspend)
 	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mrc	p15, 0, r5, c13, c0, 1	@ Context ID
+	mrc	p15, 0, r6, c13, c0, 3	@ User r/o thread ID
+	stmia	r0!, {r4 - r6}
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 0	@ TTB 0
 	mrc	p15, 0, r8, c2, c0, 1	@ TTB 1
 	mrc	p15, 0, r9, c1, c0, 0	@ Control register
 	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
 	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access control
-	stmia	r0, {r4 - r11}
+	stmia	r0, {r6 - r11}
 	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_v7_do_suspend)
 
@@ -230,9 +232,11 @@ ENTRY(cpu_v7_do_resume)
 	mov	ip, #0
 	mcr	p15, 0, ip, c8, c7, 0	@ invalidate TLBs
 	mcr	p15, 0, ip, c7, c5, 0	@ invalidate I cache
-	ldmia	r0, {r4 - r11}
+	ldmia	r0!, {r4 - r6}
 	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mcr	p15, 0, r5, c13, c0, 1	@ Context ID
+	mcr	p15, 0, r6, c13, c0, 3	@ User r/o thread ID
+	ldmia	r0, {r6 - r11}
 	mcr	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mcr	p15, 0, r7, c2, c0, 0	@ TTB 0
 	mcr	p15, 0, r8, c2, c0, 1	@ TTB 1
@@ -418,9 +422,9 @@ ENTRY(v7_processor_functions)
 	.word	cpu_v7_dcache_clean_area
 	.word	cpu_v7_switch_mm
 	.word	cpu_v7_set_pte_ext
-	.word	0
+	.word	cpu_v7_suspend_size
-	.word	0
+	.word	cpu_v7_do_suspend
-	.word	0
+	.word	cpu_v7_do_resume
 	.size	v7_processor_functions, . - v7_processor_functions
 
 	.section ".rodata"

arch/arm/plat-iop/cp6.c

@@ -18,6 +18,7 @@
  */
 #include <linux/init.h>
 #include <asm/traps.h>
+#include <asm/ptrace.h>
 
 static int cp6_trap(struct pt_regs *regs, unsigned int instr)
 {

arch/arm/plat-samsung/include/plat/regs-serial.h

@@ -224,6 +224,8 @@
 #define S5PV210_UFSTAT_RXMASK	(255<<0)
 #define S5PV210_UFSTAT_RXSHIFT	(0)
 
+#define NO_NEED_CHECK_CLKSRC	1
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc

arch/m32r/include/asm/mmzone.h

@@ -14,12 +14,6 @@ extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)		(node_data[nid])
 
 #define node_localnr(pfn, nid)	((pfn) - NODE_DATA(nid)->node_start_pfn)
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)						\
-({									\
-	pg_data_t *__pgdat = NODE_DATA(nid);				\
-	__pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1;	\
-})
 
 #define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
 /*
@@ -44,7 +38,7 @@ static __inline__ int pfn_to_nid(unsigned long pfn)
 	int node;
 
 	for (node = 0 ; node < MAX_NUMNODES ; node++)
-		if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node))
+		if (pfn >= node_start_pfn(node) && pfn < node_end_pfn(node))
 			break;
 
 	return node;

arch/mn10300/include/asm/uaccess.h

@@ -15,6 +15,7 @@
  * User space memory access functions
  */
 #include <linux/thread_info.h>
+#include <linux/kernel.h>
 #include <asm/page.h>
 #include <asm/errno.h>
 

arch/parisc/include/asm/mmzone.h

@@ -14,13 +14,6 @@ extern struct node_map_data node_data[];
 
 #define NODE_DATA(nid)          (&node_data[nid].pg_data)
 
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)						\
-({									\
-	pg_data_t *__pgdat = NODE_DATA(nid);				\
-	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
-})
-
 /* We have these possible memory map layouts:
  * Astro: 0-3.75, 67.75-68, 4-64
  * zx1: 0-1, 257-260, 4-256

arch/powerpc/include/asm/mmzone.h

@@ -38,13 +38,6 @@ u64 memory_hotplug_max(void);
 #define memory_hotplug_max() memblock_end_of_DRAM()
 #endif
 
-/*
- * Following are macros that each numa implmentation must define.
- */
-
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
-
 #else
 #define memory_hotplug_max() memblock_end_of_DRAM()
 #endif /* CONFIG_NEED_MULTIPLE_NODES */

arch/s390/Kconfig

@@ -579,6 +579,7 @@ config S390_GUEST
 	def_bool y
 	prompt "s390 guest support for KVM (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
+	select VIRTUALIZATION
 	select VIRTIO
 	select VIRTIO_RING
 	select VIRTIO_CONSOLE

arch/s390/kernel/smp.c

@@ -262,7 +262,7 @@ void smp_ctl_set_bit(int cr, int bit)
 
 	memset(&parms.orvals, 0, sizeof(parms.orvals));
 	memset(&parms.andvals, 0xff, sizeof(parms.andvals));
-	parms.orvals[cr] = 1 << bit;
+	parms.orvals[cr] = 1UL << bit;
 	on_each_cpu(smp_ctl_bit_callback, &parms, 1);
 }
 EXPORT_SYMBOL(smp_ctl_set_bit);
@@ -276,7 +276,7 @@ void smp_ctl_clear_bit(int cr, int bit)
 
 	memset(&parms.orvals, 0, sizeof(parms.orvals));
 	memset(&parms.andvals, 0xff, sizeof(parms.andvals));
-	parms.andvals[cr] = ~(1L << bit);
+	parms.andvals[cr] = ~(1UL << bit);
 	on_each_cpu(smp_ctl_bit_callback, &parms, 1);
 }
 EXPORT_SYMBOL(smp_ctl_clear_bit);

arch/s390/oprofile/init.c

@@ -25,7 +25,7 @@ extern void s390_backtrace(struct pt_regs * const regs, unsigned int depth);
 
 #include "hwsampler.h"
 
-#define DEFAULT_INTERVAL	4096
+#define DEFAULT_INTERVAL	4127518
 
 #define DEFAULT_SDBT_BLOCKS	1
 #define DEFAULT_SDB_BLOCKS	511
@@ -151,6 +151,12 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops)
 	if (oprofile_max_interval == 0)
 		return -ENODEV;
 
+	/* The initial value should be sane */
+	if (oprofile_hw_interval < oprofile_min_interval)
+		oprofile_hw_interval = oprofile_min_interval;
+	if (oprofile_hw_interval > oprofile_max_interval)
+		oprofile_hw_interval = oprofile_max_interval;
+
 	if (oprofile_timer_init(ops))
 		return -ENODEV;
 

arch/sh/include/asm/mmzone.h

@@ -9,10 +9,6 @@
 extern struct pglist_data *node_data[];
 #define NODE_DATA(nid)		(node_data[nid])
 
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)	(NODE_DATA(nid)->node_start_pfn + \
-				 NODE_DATA(nid)->node_spanned_pages)
-
 static inline int pfn_to_nid(unsigned long pfn)
 {
 	int nid;

arch/sparc/include/asm/mmzone.h

@@ -8,8 +8,6 @@
 extern struct pglist_data *node_data[];
 
 #define NODE_DATA(nid)		(node_data[nid])
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
 
 extern int numa_cpu_lookup_table[];
 extern cpumask_t numa_cpumask_lookup_table[];

arch/tile/include/asm/mmzone.h

@@ -40,17 +40,6 @@ static inline int pfn_to_nid(unsigned long pfn)
 	return highbits_to_node[__pfn_to_highbits(pfn)];
 }
 
-/*
- * Following are macros that each numa implmentation must define.
- */
-
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)						\
-({									\
-	pg_data_t *__pgdat = NODE_DATA(nid);				\
-	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
-})
-
 #define kern_addr_valid(kaddr)	virt_addr_valid((void *)kaddr)
 
 static inline int pfn_valid(int pfn)

arch/um/include/asm/percpu.h

@@ -0,0 +1,6 @@
+#ifndef __UM_PERCPU_H
+#define __UM_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __UM_PERCPU_H */

arch/x86/include/asm/mmzone_32.h

@@ -48,17 +48,6 @@ static inline int pfn_to_nid(unsigned long pfn)
 #endif
 }
 
-/*
- * Following are macros that each numa implmentation must define.
- */
-
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)						\
-({									\
-	pg_data_t *__pgdat = NODE_DATA(nid);				\
-	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
-})
-
 static inline int pfn_valid(int pfn)
 {
 	int nid = pfn_to_nid(pfn);

arch/x86/include/asm/mmzone_64.h

@@ -13,8 +13,5 @@ extern struct pglist_data *node_data[];
 
 #define NODE_DATA(nid)		(node_data[nid])
 
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid)       (NODE_DATA(nid)->node_start_pfn +	\
-				 NODE_DATA(nid)->node_spanned_pages)
 #endif
 #endif /* _ASM_X86_MMZONE_64_H */

arch/x86/pci/acpi.c

@@ -188,7 +188,7 @@ static bool resource_contains(struct resource *res, resource_size_t point)
 	return false;
 }
 
-static void coalesce_windows(struct pci_root_info *info, int type)
+static void coalesce_windows(struct pci_root_info *info, unsigned long type)
 {
 	int i, j;
 	struct resource *res1, *res2;

block/blk-throttle.c

@@ -927,7 +927,7 @@ static int throtl_dispatch(struct request_queue *q)
 
 	bio_list_init(&bio_list_on_stack);
 
-	throtl_log(td, "dispatch nr_queued=%lu read=%u write=%u",
+	throtl_log(td, "dispatch nr_queued=%d read=%u write=%u",
 			total_nr_queued(td), td->nr_queued[READ],
 			td->nr_queued[WRITE]);
 
@@ -1204,7 +1204,7 @@ int blk_throtl_bio(struct request_queue *q, struct bio **biop)
 	}
 
 queue_bio:
-	throtl_log_tg(td, tg, "[%c] bio. bdisp=%u sz=%u bps=%llu"
+	throtl_log_tg(td, tg, "[%c] bio. bdisp=%llu sz=%u bps=%llu"
 			" iodisp=%u iops=%u queued=%d/%d",
 			rw == READ ? 'R' : 'W',
 			tg->bytes_disp[rw], bio->bi_size, tg->bps[rw],

block/cfq-iosched.c

@@ -988,9 +988,10 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
 
 	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
 					st->min_vdisktime);
-	cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u disp=%u charge=%u iops=%u"
+	cfq_log_cfqq(cfqq->cfqd, cfqq,
-			" sect=%u", used_sl, cfqq->slice_dispatch, charge,
+		     "sl_used=%u disp=%u charge=%u iops=%u sect=%lu",
-			iops_mode(cfqd), cfqq->nr_sectors);
+		     used_sl, cfqq->slice_dispatch, charge,
+		     iops_mode(cfqd), cfqq->nr_sectors);
 	cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl,
 					  unaccounted_sl);
 	cfq_blkiocg_set_start_empty_time(&cfqg->blkg);
@@ -2023,8 +2024,8 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 	 */
 	if (sample_valid(cic->ttime_samples) &&
 	    (cfqq->slice_end - jiffies < cic->ttime_mean)) {
-		cfq_log_cfqq(cfqd, cfqq, "Not idling. think_time:%d",
+		cfq_log_cfqq(cfqd, cfqq, "Not idling. think_time:%lu",
-				cic->ttime_mean);
+			     cic->ttime_mean);
 		return;
 	}
 
@@ -2772,8 +2773,11 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd,
 	smp_wmb();
 	cic->key = cfqd_dead_key(cfqd);
 
-	if (ioc->ioc_data == cic)
+	if (rcu_dereference(ioc->ioc_data) == cic) {
+		spin_lock(&ioc->lock);
 		rcu_assign_pointer(ioc->ioc_data, NULL);
+		spin_unlock(&ioc->lock);
+	}
 
 	if (cic->cfqq[BLK_RW_ASYNC]) {
 		cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]);

block/genhd.c

@@ -1371,6 +1371,7 @@ struct disk_events {
 	struct gendisk		*disk;		/* the associated disk */
 	spinlock_t		lock;
 
+	struct mutex		block_mutex;	/* protects blocking */
 	int			block;		/* event blocking depth */
 	unsigned int		pending;	/* events already sent out */
 	unsigned int		clearing;	/* events being cleared */
@@ -1414,22 +1415,44 @@ static unsigned long disk_events_poll_jiffies(struct gendisk *disk)
 	return msecs_to_jiffies(intv_msecs);
 }
 
-static void __disk_block_events(struct gendisk *disk, bool sync)
+/**
+ * disk_block_events - block and flush disk event checking
+ * @disk: disk to block events for
+ *
+ * On return from this function, it is guaranteed that event checking
+ * isn't in progress and won't happen until unblocked by
+ * disk_unblock_events().  Events blocking is counted and the actual
+ * unblocking happens after the matching number of unblocks are done.
+ *
+ * Note that this intentionally does not block event checking from
+ * disk_clear_events().
+ *
+ * CONTEXT:
+ * Might sleep.
+ */
+void disk_block_events(struct gendisk *disk)
 {
 	struct disk_events *ev = disk->ev;
 	unsigned long flags;
 	bool cancel;
 
+	if (!ev)
+		return;
+
+	/*
+	 * Outer mutex ensures that the first blocker completes canceling
+	 * the event work before further blockers are allowed to finish.
+	 */
+	mutex_lock(&ev->block_mutex);
+
 	spin_lock_irqsave(&ev->lock, flags);
 	cancel = !ev->block++;
 	spin_unlock_irqrestore(&ev->lock, flags);
 
-	if (cancel) {
+	if (cancel)
-		if (sync)
+		cancel_delayed_work_sync(&disk->ev->dwork);
-			cancel_delayed_work_sync(&disk->ev->dwork);
+
-		else
+	mutex_unlock(&ev->block_mutex);
-			cancel_delayed_work(&disk->ev->dwork);
-	}
 }
 
 static void __disk_unblock_events(struct gendisk *disk, bool check_now)
@@ -1460,27 +1483,6 @@ out_unlock:
 	spin_unlock_irqrestore(&ev->lock, flags);
 }
 
-/**
- * disk_block_events - block and flush disk event checking
- * @disk: disk to block events for
- *
- * On return from this function, it is guaranteed that event checking
- * isn't in progress and won't happen until unblocked by
- * disk_unblock_events().  Events blocking is counted and the actual
- * unblocking happens after the matching number of unblocks are done.
- *
- * Note that this intentionally does not block event checking from
- * disk_clear_events().
- *
- * CONTEXT:
- * Might sleep.
- */
-void disk_block_events(struct gendisk *disk)
-{
-	if (disk->ev)
-		__disk_block_events(disk, true);
-}
-
 /**
  * disk_unblock_events - unblock disk event checking
  * @disk: disk to unblock events for
@@ -1508,10 +1510,18 @@ void disk_unblock_events(struct gendisk *disk)
  */
 void disk_check_events(struct gendisk *disk)
 {
-	if (disk->ev) {
+	struct disk_events *ev = disk->ev;
-		__disk_block_events(disk, false);
+	unsigned long flags;
-		__disk_unblock_events(disk, true);
+
+	if (!ev)
+		return;
+
+	spin_lock_irqsave(&ev->lock, flags);
+	if (!ev->block) {
+		cancel_delayed_work(&ev->dwork);
+		queue_delayed_work(system_nrt_wq, &ev->dwork, 0);
 	}
+	spin_unlock_irqrestore(&ev->lock, flags);
 }
 EXPORT_SYMBOL_GPL(disk_check_events);
 
@@ -1546,7 +1556,7 @@ unsigned int disk_clear_events(struct gendisk *disk, unsigned int mask)
 	spin_unlock_irq(&ev->lock);
 
 	/* uncondtionally schedule event check and wait for it to finish */
-	__disk_block_events(disk, true);
+	disk_block_events(disk);
 	queue_delayed_work(system_nrt_wq, &ev->dwork, 0);
 	flush_delayed_work(&ev->dwork);
 	__disk_unblock_events(disk, false);
@@ -1664,7 +1674,7 @@ static ssize_t disk_events_poll_msecs_store(struct device *dev,
 	if (intv < 0 && intv != -1)
 		return -EINVAL;
 
-	__disk_block_events(disk, true);
+	disk_block_events(disk);
 	disk->ev->poll_msecs = intv;
 	__disk_unblock_events(disk, true);
 
@@ -1750,6 +1760,7 @@ static void disk_add_events(struct gendisk *disk)
 	INIT_LIST_HEAD(&ev->node);
 	ev->disk = disk;
 	spin_lock_init(&ev->lock);
+	mutex_init(&ev->block_mutex);
 	ev->block = 1;
 	ev->poll_msecs = -1;
 	INIT_DELAYED_WORK(&ev->dwork, disk_events_workfn);
@@ -1770,7 +1781,7 @@ static void disk_del_events(struct gendisk *disk)
 	if (!disk->ev)
 		return;
 
-	__disk_block_events(disk, true);
+	disk_block_events(disk);
 
 	mutex_lock(&disk_events_mutex);
 	list_del_init(&disk->ev->node);

drivers/ata/libata-core.c

@@ -4143,9 +4143,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	 * Devices which choke on SETXFER.  Applies only if both the
 	 * device and controller are SATA.
 	 */
-	{ "PIONEER DVD-RW  DVRTD08",	"1.00",	ATA_HORKAGE_NOSETXFER },
+	{ "PIONEER DVD-RW  DVRTD08",	NULL,	ATA_HORKAGE_NOSETXFER },
-	{ "PIONEER DVD-RW  DVR-212D",	"1.28", ATA_HORKAGE_NOSETXFER },
+	{ "PIONEER DVD-RW  DVR-212D",	NULL,	ATA_HORKAGE_NOSETXFER },
-	{ "PIONEER DVD-RW  DVR-216D",	"1.08", ATA_HORKAGE_NOSETXFER },
+	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
 	/* End Marker */
 	{ }

drivers/ata/libata-scsi.c

@@ -3797,6 +3797,12 @@ EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
  */
 int ata_sas_port_start(struct ata_port *ap)
 {
+	/*
+	 * the port is marked as frozen at allocation time, but if we don't
+	 * have new eh, we won't thaw it
+	 */
+	if (!ap->ops->error_handler)
+		ap->pflags &= ~ATA_PFLAG_FROZEN;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_start);

drivers/ata/pata_marvell.c

@@ -161,6 +161,9 @@ static const struct pci_device_id marvell_pci_tbl[] = {
 	{ PCI_DEVICE(0x11AB, 0x6121), },
 	{ PCI_DEVICE(0x11AB, 0x6123), },
 	{ PCI_DEVICE(0x11AB, 0x6145), },
+	{ PCI_DEVICE(0x1B4B, 0x91A0), },
+	{ PCI_DEVICE(0x1B4B, 0x91A4), },
+
 	{ }	/* terminate list */
 };
 

drivers/ata/sata_dwc_460ex.c

@@ -389,7 +389,7 @@ static void sata_dwc_tf_dump(struct ata_taskfile *tf)
 /*
  * Function: get_burst_length_encode
  * arguments: datalength: length in bytes of data
- * returns value to be programmed in register corrresponding to data length
+ * returns value to be programmed in register corresponding to data length
  * This value is effectively the log(base 2) of the length
  */
 static  int get_burst_length_encode(int datalength)

drivers/base/platform.c

@@ -367,7 +367,7 @@ EXPORT_SYMBOL_GPL(platform_device_unregister);
  *
  * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
  */
-struct platform_device *__init_or_module platform_device_register_resndata(
+struct platform_device *platform_device_register_resndata(
 		struct device *parent,
 		const char *name, int id,
 		const struct resource *res, unsigned int num,

drivers/base/power/clock_ops.c

@@ -387,7 +387,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb,
 	clknb = container_of(nb, struct pm_clk_notifier_block, nb);
 
 	switch (action) {
-	case BUS_NOTIFY_ADD_DEVICE:
+	case BUS_NOTIFY_BIND_DRIVER:
 		if (clknb->con_ids[0]) {
 			for (con_id = clknb->con_ids; *con_id; con_id++)
 				enable_clock(dev, *con_id);
@@ -395,7 +395,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb,
 			enable_clock(dev, NULL);
 		}
 		break;
-	case BUS_NOTIFY_DEL_DEVICE:
+	case BUS_NOTIFY_UNBOUND_DRIVER:
 		if (clknb->con_ids[0]) {
 			for (con_id = clknb->con_ids; *con_id; con_id++)
 				disable_clock(dev, *con_id);

drivers/base/power/main.c

@@ -57,7 +57,8 @@ static int async_error;
  */
 void device_pm_init(struct device *dev)
 {
-	dev->power.in_suspend = false;
+	dev->power.is_prepared = false;
+	dev->power.is_suspended = false;
 	init_completion(&dev->power.completion);
 	complete_all(&dev->power.completion);
 	dev->power.wakeup = NULL;
@@ -91,7 +92,7 @@ void device_pm_add(struct device *dev)
 	pr_debug("PM: Adding info for %s:%s\n",
 		 dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
 	mutex_lock(&dpm_list_mtx);
-	if (dev->parent && dev->parent->power.in_suspend)
+	if (dev->parent && dev->parent->power.is_prepared)
 		dev_warn(dev, "parent %s should not be sleeping\n",
 			dev_name(dev->parent));
 	list_add_tail(&dev->power.entry, &dpm_list);
@@ -511,7 +512,14 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 	dpm_wait(dev->parent, async);
 	device_lock(dev);
 
-	dev->power.in_suspend = false;
+	/*
+	 * This is a fib.  But we'll allow new children to be added below
+	 * a resumed device, even if the device hasn't been completed yet.
+	 */
+	dev->power.is_prepared = false;
+
+	if (!dev->power.is_suspended)
+		goto Unlock;
 
 	if (dev->pwr_domain) {
 		pm_dev_dbg(dev, state, "power domain ");
@@ -548,6 +556,9 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 	}
 
  End:
+	dev->power.is_suspended = false;
+
+ Unlock:
 	device_unlock(dev);
 	complete_all(&dev->power.completion);
 
@@ -670,7 +681,7 @@ void dpm_complete(pm_message_t state)
 		struct device *dev = to_device(dpm_prepared_list.prev);
 
 		get_device(dev);
-		dev->power.in_suspend = false;
+		dev->power.is_prepared = false;
 		list_move(&dev->power.entry, &list);
 		mutex_unlock(&dpm_list_mtx);
 
@@ -835,11 +846,11 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 	device_lock(dev);
 
 	if (async_error)
-		goto End;
+		goto Unlock;
 
 	if (pm_wakeup_pending()) {
 		async_error = -EBUSY;
-		goto End;
+		goto Unlock;
 	}
 
 	if (dev->pwr_domain) {
@@ -877,6 +888,9 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 	}
 
  End:
+	dev->power.is_suspended = !error;
+
+ Unlock:
 	device_unlock(dev);
 	complete_all(&dev->power.completion);
 
@@ -1042,7 +1056,7 @@ int dpm_prepare(pm_message_t state)
 			put_device(dev);
 			break;
 		}
-		dev->power.in_suspend = true;
+		dev->power.is_prepared = true;
 		if (!list_empty(&dev->power.entry))
 			list_move_tail(&dev->power.entry, &dpm_prepared_list);
 		put_device(dev);

drivers/connector/connector.c

@@ -139,6 +139,7 @@ static int cn_call_callback(struct sk_buff *skb)
 	spin_unlock_bh(&dev->cbdev->queue_lock);
 
 	if (cbq != NULL) {
+		err = 0;
 		cbq->callback(msg, nsp);
 		kfree_skb(skb);
 		cn_queue_release_callback(cbq);

drivers/firmware/google/Kconfig

@@ -13,6 +13,7 @@ menu "Google Firmware Drivers"
 config GOOGLE_SMI
 	tristate "SMI interface for Google platforms"
 	depends on ACPI && DMI
+	select EFI
 	select EFI_VARS
 	help
 	  Say Y here if you want to enable SMI callbacks for Google

drivers/gpu/drm/drm_gem.c

@@ -34,6 +34,7 @@
 #include <linux/module.h>
 #include <linux/mman.h>
 #include <linux/pagemap.h>
+#include <linux/shmem_fs.h>
 #include "drmP.h"
 
 /** @file drm_gem.c

drivers/gpu/drm/i915/i915_gem.c

@@ -31,6 +31,7 @@
 #include "i915_drv.h"
 #include "i915_trace.h"
 #include "intel_drv.h"
+#include <linux/shmem_fs.h>
 #include <linux/slab.h>
 #include <linux/swap.h>
 #include <linux/pci.h>
@@ -359,8 +360,7 @@ i915_gem_shmem_pread_fast(struct drm_device *dev,
 		if ((page_offset + remain) > PAGE_SIZE)
 			page_length = PAGE_SIZE - page_offset;
 
-		page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
+		page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
-					   GFP_HIGHUSER | __GFP_RECLAIMABLE);
 		if (IS_ERR(page))
 			return PTR_ERR(page);
 
@@ -463,8 +463,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev,
 		if ((data_page_offset + page_length) > PAGE_SIZE)
 			page_length = PAGE_SIZE - data_page_offset;
 
-		page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
+		page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
-					   GFP_HIGHUSER | __GFP_RECLAIMABLE);
 		if (IS_ERR(page)) {
 			ret = PTR_ERR(page);
 			goto out;
@@ -797,8 +796,7 @@ i915_gem_shmem_pwrite_fast(struct drm_device *dev,
 		if ((page_offset + remain) > PAGE_SIZE)
 			page_length = PAGE_SIZE - page_offset;
 
-		page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
+		page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
-					   GFP_HIGHUSER | __GFP_RECLAIMABLE);
 		if (IS_ERR(page))
 			return PTR_ERR(page);
 
@@ -907,8 +905,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev,
 		if ((data_page_offset + page_length) > PAGE_SIZE)
 			page_length = PAGE_SIZE - data_page_offset;
 
-		page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
+		page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
-					   GFP_HIGHUSER | __GFP_RECLAIMABLE);
 		if (IS_ERR(page)) {
 			ret = PTR_ERR(page);
 			goto out;
@@ -1558,12 +1555,10 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj,
 
 	inode = obj->base.filp->f_path.dentry->d_inode;
 	mapping = inode->i_mapping;
+	gfpmask |= mapping_gfp_mask(mapping);
+
 	for (i = 0; i < page_count; i++) {
-		page = read_cache_page_gfp(mapping, i,
+		page = shmem_read_mapping_page_gfp(mapping, i, gfpmask);
-					   GFP_HIGHUSER |
-					   __GFP_COLD |
-					   __GFP_RECLAIMABLE |
-					   gfpmask);
 		if (IS_ERR(page))
 			goto err_pages;
 
@@ -1701,13 +1696,10 @@ i915_gem_object_truncate(struct drm_i915_gem_object *obj)
 	/* Our goal here is to return as much of the memory as
 	 * is possible back to the system as we are called from OOM.
 	 * To do this we must instruct the shmfs to drop all of its
-	 * backing pages, *now*. Here we mirror the actions taken
+	 * backing pages, *now*.
-	 * when by shmem_delete_inode() to release the backing store.
 	 */
 	inode = obj->base.filp->f_path.dentry->d_inode;
-	truncate_inode_pages(inode->i_mapping, 0);
+	shmem_truncate_range(inode, 0, (loff_t)-1);
-	if (inode->i_op->truncate_range)
-		inode->i_op->truncate_range(inode, 0, (loff_t)-1);
 
 	obj->madv = __I915_MADV_PURGED;
 }
@@ -3688,6 +3680,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj;
+	struct address_space *mapping;
 
 	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
 	if (obj == NULL)
@@ -3698,6 +3691,9 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
 		return NULL;
 	}
 
+	mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
+	mapping_set_gfp_mask(mapping, GFP_HIGHUSER | __GFP_RECLAIMABLE);
+
 	i915_gem_info_add_obj(dev_priv, size);
 
 	obj->base.write_domain = I915_GEM_DOMAIN_CPU;
@@ -4089,8 +4085,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev,
 
 	page_count = obj->base.size / PAGE_SIZE;
 	for (i = 0; i < page_count; i++) {
-		struct page *page = read_cache_page_gfp(mapping, i,
+		struct page *page = shmem_read_mapping_page(mapping, i);
-							GFP_HIGHUSER | __GFP_RECLAIMABLE);
 		if (!IS_ERR(page)) {
 			char *dst = kmap_atomic(page);
 			memcpy(dst, vaddr + i*PAGE_SIZE, PAGE_SIZE);
@@ -4151,8 +4146,7 @@ i915_gem_attach_phys_object(struct drm_device *dev,
 		struct page *page;
 		char *dst, *src;
 
-		page = read_cache_page_gfp(mapping, i,
+		page = shmem_read_mapping_page(mapping, i);
-					   GFP_HIGHUSER | __GFP_RECLAIMABLE);
 		if (IS_ERR(page))
 			return PTR_ERR(page);
 

drivers/gpu/drm/radeon/evergreen.c

@@ -2013,9 +2013,9 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 		rdev->config.evergreen.tile_config |= (3 << 0);
 		break;
 	}
-	/* num banks is 8 on all fusion asics */
+	/* num banks is 8 on all fusion asics. 0 = 4, 1 = 8, 2 = 16 */
 	if (rdev->flags & RADEON_IS_IGP)
-		rdev->config.evergreen.tile_config |= 8 << 4;
+		rdev->config.evergreen.tile_config |= 1 << 4;
 	else
 		rdev->config.evergreen.tile_config |=
 			((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4;

drivers/gpu/drm/radeon/radeon.h

@@ -179,6 +179,7 @@ void radeon_pm_resume(struct radeon_device *rdev);
 void radeon_combios_get_power_modes(struct radeon_device *rdev);
 void radeon_atombios_get_power_modes(struct radeon_device *rdev);
 void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 voltage_type);
+int radeon_atom_get_max_vddc(struct radeon_device *rdev, u16 *voltage);
 void rs690_pm_info(struct radeon_device *rdev);
 extern int rv6xx_get_temp(struct radeon_device *rdev);
 extern int rv770_get_temp(struct radeon_device *rdev);

drivers/gpu/drm/radeon/radeon_atombios.c

@@ -2320,6 +2320,14 @@ static bool radeon_atombios_parse_pplib_clock_info(struct radeon_device *rdev,
 			le16_to_cpu(clock_info->r600.usVDDC);
 	}
 
+	/* patch up vddc if necessary */
+	if (rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage == 0xff01) {
+		u16 vddc;
+
+		if (radeon_atom_get_max_vddc(rdev, &vddc) == 0)
+			rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage = vddc;
+	}
+
 	if (rdev->flags & RADEON_IS_IGP) {
 		/* skip invalid modes */
 		if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0)
@@ -2630,7 +2638,35 @@ void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 v
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
+int radeon_atom_get_max_vddc(struct radeon_device *rdev,
+			     u16 *voltage)
+{
+	union set_voltage args;
+	int index = GetIndexIntoMasterTable(COMMAND, SetVoltage);
+	u8 frev, crev;
 
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return -EINVAL;
+
+	switch (crev) {
+	case 1:
+		return -EINVAL;
+	case 2:
+		args.v2.ucVoltageType = SET_VOLTAGE_GET_MAX_VOLTAGE;
+		args.v2.ucVoltageMode = 0;
+		args.v2.usVoltageLevel = 0;
+
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+		*voltage = le16_to_cpu(args.v2.usVoltageLevel);
+		break;
+	default:
+		DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+		return -EINVAL;
+	}
+
+	return 0;
+}
 
 void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev)
 {

drivers/gpu/drm/ttm/ttm_tt.c

@@ -31,6 +31,7 @@
 #include <linux/sched.h>
 #include <linux/highmem.h>
 #include <linux/pagemap.h>
+#include <linux/shmem_fs.h>
 #include <linux/file.h>
 #include <linux/swap.h>
 #include <linux/slab.h>
@@ -484,7 +485,7 @@ static int ttm_tt_swapin(struct ttm_tt *ttm)
 	swap_space = swap_storage->f_path.dentry->d_inode->i_mapping;
 
 	for (i = 0; i < ttm->num_pages; ++i) {
-		from_page = read_mapping_page(swap_space, i, NULL);
+		from_page = shmem_read_mapping_page(swap_space, i);
 		if (IS_ERR(from_page)) {
 			ret = PTR_ERR(from_page);
 			goto out_err;
@@ -557,7 +558,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage)
 		from_page = ttm->pages[i];
 		if (unlikely(from_page == NULL))
 			continue;
-		to_page = read_mapping_page(swap_space, i, NULL);
+		to_page = shmem_read_mapping_page(swap_space, i);
 		if (unlikely(IS_ERR(to_page))) {
 			ret = PTR_ERR(to_page);
 			goto out_err;

drivers/hid/hid-core.c

@@ -1423,6 +1423,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH_DUAL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },

drivers/hid/hid-ids.h

@@ -449,6 +449,7 @@
 
 #define USB_VENDOR_ID_LUMIO		0x202e
 #define USB_DEVICE_ID_CRYSTALTOUCH	0x0006
+#define USB_DEVICE_ID_CRYSTALTOUCH_DUAL	0x0007
 
 #define USB_VENDOR_ID_MCC		0x09db
 #define USB_DEVICE_ID_MCC_PMD1024LS	0x0076

drivers/hid/hid-multitouch.c

@@ -271,6 +271,8 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 			}
 			return 1;
 		case HID_DG_CONTACTID:
+			if (!td->maxcontacts)
+				td->maxcontacts = MT_DEFAULT_MAXCONTACT;
 			input_mt_init_slots(hi->input, td->maxcontacts);
 			td->last_slot_field = usage->hid;
 			td->last_field_index = field->index;
@@ -547,9 +549,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (ret)
 		goto fail;
 
-	if (!td->maxcontacts)
-		td->maxcontacts = MT_DEFAULT_MAXCONTACT;
-
 	td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot),
 				GFP_KERNEL);
 	if (!td->slots) {
@@ -677,6 +676,9 @@ static const struct hid_device_id mt_devices[] = {
 	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
 		HID_USB_DEVICE(USB_VENDOR_ID_LUMIO,
 			USB_DEVICE_ID_CRYSTALTOUCH) },
+	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
+		HID_USB_DEVICE(USB_VENDOR_ID_LUMIO,
+			USB_DEVICE_ID_CRYSTALTOUCH_DUAL) },
 
 	/* MosArt panels */
 	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
@@ -707,10 +709,10 @@ static const struct hid_device_id mt_devices[] = {
 		HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
 			USB_DEVICE_ID_MTP)},
 	{ .driver_data = MT_CLS_CONFIDENCE,
-		HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
+		HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM,
 			USB_DEVICE_ID_MTP_STM)},
 	{ .driver_data = MT_CLS_CONFIDENCE,
-		HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
+		HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX,
 			USB_DEVICE_ID_MTP_SITRONIX)},
 
 	/* Touch International panels */

drivers/infiniband/hw/cxgb4/cm.c

@@ -1463,9 +1463,9 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 	struct c4iw_qp_attributes attrs;
 	int disconnect = 1;
 	int release = 0;
-	int abort = 0;
 	struct tid_info *t = dev->rdev.lldi.tids;
 	unsigned int tid = GET_TID(hdr);
+	int ret;
 
 	ep = lookup_tid(t, tid);
 	PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
@@ -1501,10 +1501,12 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 		start_ep_timer(ep);
 		__state_set(&ep->com, CLOSING);
 		attrs.next_state = C4IW_QP_STATE_CLOSING;
-		abort = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
+		ret = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
 				       C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
-		peer_close_upcall(ep);
+		if (ret != -ECONNRESET) {
-		disconnect = 1;
+			peer_close_upcall(ep);
+			disconnect = 1;
+		}
 		break;
 	case ABORTING:
 		disconnect = 0;
@@ -2109,15 +2111,16 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
 		break;
 	}
 
-	mutex_unlock(&ep->com.mutex);
 	if (close) {
-		if (abrupt)
+		if (abrupt) {
-			ret = abort_connection(ep, NULL, gfp);
+			close_complete_upcall(ep);
-		else
+			ret = send_abort(ep, NULL, gfp);
+		} else
 			ret = send_halfclose(ep, gfp);
 		if (ret)
 			fatal = 1;
 	}
+	mutex_unlock(&ep->com.mutex);
 	if (fatal)
 		release_ep_resources(ep);
 	return ret;
@@ -2301,6 +2304,31 @@ static int fw6_msg(struct c4iw_dev *dev, struct sk_buff *skb)
 	return 0;
 }
 
+static int peer_abort_intr(struct c4iw_dev *dev, struct sk_buff *skb)
+{
+	struct cpl_abort_req_rss *req = cplhdr(skb);
+	struct c4iw_ep *ep;
+	struct tid_info *t = dev->rdev.lldi.tids;
+	unsigned int tid = GET_TID(req);
+
+	ep = lookup_tid(t, tid);
+	if (is_neg_adv_abort(req->status)) {
+		PDBG("%s neg_adv_abort ep %p tid %u\n", __func__, ep,
+		     ep->hwtid);
+		kfree_skb(skb);
+		return 0;
+	}
+	PDBG("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid,
+	     ep->com.state);
+
+	/*
+	 * Wake up any threads in rdma_init() or rdma_fini().
+	 */
+	c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
+	sched(dev, skb);
+	return 0;
+}
+
 /*
  * Most upcalls from the T4 Core go to sched() to
  * schedule the processing on a work queue.
@@ -2317,7 +2345,7 @@ c4iw_handler_func c4iw_handlers[NUM_CPL_CMDS] = {
 	[CPL_PASS_ESTABLISH] = sched,
 	[CPL_PEER_CLOSE] = sched,
 	[CPL_CLOSE_CON_RPL] = sched,
-	[CPL_ABORT_REQ_RSS] = sched,
+	[CPL_ABORT_REQ_RSS] = peer_abort_intr,
 	[CPL_RDMA_TERMINATE] = sched,
 	[CPL_FW4_ACK] = sched,
 	[CPL_SET_TCB_RPL] = set_tcb_rpl,

drivers/infiniband/hw/cxgb4/cq.c

@@ -801,6 +801,10 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev, int entries,
 	if (ucontext) {
 		memsize = roundup(memsize, PAGE_SIZE);
 		hwentries = memsize / sizeof *chp->cq.queue;
+		while (hwentries > T4_MAX_IQ_SIZE) {
+			memsize -= PAGE_SIZE;
+			hwentries = memsize / sizeof *chp->cq.queue;
+		}
 	}
 	chp->cq.size = hwentries;
 	chp->cq.memsize = memsize;

drivers/infiniband/hw/cxgb4/mem.c

@@ -625,7 +625,7 @@ pbl_done:
 	mhp->attr.perms = c4iw_ib_to_tpt_access(acc);
 	mhp->attr.va_fbo = virt;
 	mhp->attr.page_size = shift - 12;
-	mhp->attr.len = (u32) length;
+	mhp->attr.len = length;
 
 	err = register_mem(rhp, php, mhp, shift);
 	if (err)

drivers/infiniband/hw/cxgb4/qp.c

@@ -1207,11 +1207,8 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
 				c4iw_get_ep(&qhp->ep->com);
 			}
 			ret = rdma_fini(rhp, qhp, ep);
-			if (ret) {
+			if (ret)
-				if (internal)
-					c4iw_get_ep(&qhp->ep->com);
 				goto err;
-			}
 			break;
 		case C4IW_QP_STATE_TERMINATE:
 			set_state(qhp, C4IW_QP_STATE_TERMINATE);

drivers/infiniband/hw/qib/qib_iba7322.c

@@ -469,6 +469,8 @@ static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = {
 #define IB_7322_LT_STATE_RECOVERIDLE     0x0f
 #define IB_7322_LT_STATE_CFGENH          0x10
 #define IB_7322_LT_STATE_CFGTEST         0x11
+#define IB_7322_LT_STATE_CFGWAITRMTTEST  0x12
+#define IB_7322_LT_STATE_CFGWAITENH      0x13
 
 /* link state machine states from IBC */
 #define IB_7322_L_STATE_DOWN             0x0
@@ -498,8 +500,10 @@ static const u8 qib_7322_physportstate[0x20] = {
 		IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
 	[IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH,
 	[IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN,
-	[0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
+	[IB_7322_LT_STATE_CFGWAITRMTTEST] =
-	[0x13] = IB_PHYSPORTSTATE_CFG_WAIT_ENH,
+		IB_PHYSPORTSTATE_CFG_TRAIN,
+	[IB_7322_LT_STATE_CFGWAITENH] =
+		IB_PHYSPORTSTATE_CFG_WAIT_ENH,
 	[0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
 	[0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
 	[0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
@@ -1692,7 +1696,9 @@ static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst)
 		break;
 	}
 
-	if (ibclt == IB_7322_LT_STATE_CFGTEST &&
+	if (((ibclt >= IB_7322_LT_STATE_CFGTEST &&
+	      ibclt <= IB_7322_LT_STATE_CFGWAITENH) ||
+	     ibclt == IB_7322_LT_STATE_LINKUP) &&
 	    (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) {
 		force_h1(ppd);
 		ppd->cpspec->qdr_reforce = 1;
@@ -7301,12 +7307,17 @@ static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data,
 static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable)
 {
 	u64 data = qib_read_kreg_port(ppd, krp_serdesctrl);
-	printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS %s\n",
+	u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN);
-		ppd->dd->unit, ppd->port, (enable ? "on" : "off"));
+
-	if (enable)
+	if (enable && !state) {
+		printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS on\n",
+			ppd->dd->unit, ppd->port);
 		data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
-	else
+	} else if (!enable && state) {
+		printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS off\n",
+			ppd->dd->unit, ppd->port);
 		data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
+	}
 	qib_write_kreg_port(ppd, krp_serdesctrl, data);
 }
 

drivers/infiniband/hw/qib/qib_intr.c

@@ -96,8 +96,12 @@ void qib_handle_e_ibstatuschanged(struct qib_pportdata *ppd, u64 ibcs)
 	 * states, or if it transitions from any of the up (INIT or better)
 	 * states into any of the down states (except link recovery), then
 	 * call the chip-specific code to take appropriate actions.
+	 *
+	 * ppd->lflags could be 0 if this is the first time the interrupt
+	 * handlers has been called but the link is already up.
 	 */
-	if (lstate >= IB_PORT_INIT && (ppd->lflags & QIBL_LINKDOWN) &&
+	if (lstate >= IB_PORT_INIT &&
+	    (!ppd->lflags || (ppd->lflags & QIBL_LINKDOWN)) &&
 	    ltstate == IB_PHYSPORTSTATE_LINKUP) {
 		/* transitioned to UP */
 		if (dd->f_ib_updown(ppd, 1, ibcs))

drivers/leds/leds-lp5521.c

@@ -593,7 +593,7 @@ static void lp5521_unregister_sysfs(struct i2c_client *client)
 				&lp5521_led_attribute_group);
 }
 
-static int __init lp5521_init_led(struct lp5521_led *led,
+static int __devinit lp5521_init_led(struct lp5521_led *led,
 				struct i2c_client *client,
 				int chan, struct lp5521_platform_data *pdata)
 {
@@ -637,7 +637,7 @@ static int __init lp5521_init_led(struct lp5521_led *led,
 	return 0;
 }
 
-static int lp5521_probe(struct i2c_client *client,
+static int __devinit lp5521_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct lp5521_chip		*chip;

drivers/leds/leds-lp5523.c

@@ -826,7 +826,7 @@ static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
 	return 0;
 }
 
-static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
+static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev,
 			   int chan, struct lp5523_platform_data *pdata)
 {
 	char name[32];
@@ -872,7 +872,7 @@ static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
 
 static struct i2c_driver lp5523_driver;
 
-static int lp5523_probe(struct i2c_client *client,
+static int __devinit lp5523_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct lp5523_chip		*chip;

drivers/md/md.c

@@ -7088,6 +7088,7 @@ static int remove_and_add_spares(mddev_t *mddev)
 		list_for_each_entry(rdev, &mddev->disks, same_set) {
 			if (rdev->raid_disk >= 0 &&
 			    !test_bit(In_sync, &rdev->flags) &&
+			    !test_bit(Faulty, &rdev->flags) &&
 			    !test_bit(Blocked, &rdev->flags))
 				spares++;
 			if (rdev->raid_disk < 0

drivers/misc/cb710/sgbuf2.c

@@ -47,7 +47,7 @@ static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter)
 
 static inline bool needs_unaligned_copy(const void *ptr)
 {
-#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 	return false;
 #else
 	return ((ptr - NULL) & 3) != 0;

drivers/misc/ioc4.c

@@ -270,7 +270,7 @@ ioc4_variant(struct ioc4_driver_data *idd)
 	return IOC4_VARIANT_PCI_RT;
 }
 
-static void __devinit
+static void
 ioc4_load_modules(struct work_struct *work)
 {
 	request_module("sgiioc4");

drivers/misc/lkdtm.c

@@ -120,6 +120,7 @@ static int recur_count = REC_NUM_DEFAULT;
 static enum cname cpoint = CN_INVALID;
 static enum ctype cptype = CT_NONE;
 static int count = DEFAULT_COUNT;
+static DEFINE_SPINLOCK(count_lock);
 
 module_param(recur_count, int, 0644);
 MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\
@@ -230,11 +231,14 @@ static const char *cp_name_to_str(enum cname name)
 static int lkdtm_parse_commandline(void)
 {
 	int i;
+	unsigned long flags;
 
 	if (cpoint_count < 1 || recur_count < 1)
 		return -EINVAL;
 
+	spin_lock_irqsave(&count_lock, flags);
 	count = cpoint_count;
+	spin_unlock_irqrestore(&count_lock, flags);
 
 	/* No special parameters */
 	if (!cpoint_type && !cpoint_name)
@@ -349,6 +353,9 @@ static void lkdtm_do_action(enum ctype which)
 
 static void lkdtm_handler(void)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&count_lock, flags);
 	count--;
 	printk(KERN_INFO "lkdtm: Crash point %s of type %s hit, trigger in %d rounds\n",
 			cp_name_to_str(cpoint), cp_type_to_str(cptype), count);
@@ -357,6 +364,7 @@ static void lkdtm_handler(void)
 		lkdtm_do_action(cptype);
 		count = cpoint_count;
 	}
+	spin_unlock_irqrestore(&count_lock, flags);
 }
 
 static int lkdtm_register_cpoint(enum cname which)

drivers/misc/pti.c

@@ -317,7 +317,8 @@ EXPORT_SYMBOL_GPL(pti_request_masterchannel);
  *				a master, channel ID address
  *				used to write to PTI HW.
  *
- * @mc: master, channel apeture ID address to be released.
+ * @mc: master, channel apeture ID address to be released.  This
+ *      will de-allocate the structure via kfree().
  */
 void pti_release_masterchannel(struct pti_masterchannel *mc)
 {
@@ -475,8 +476,10 @@ static int pti_tty_install(struct tty_driver *driver, struct tty_struct *tty)
 		else
 			pti_tty_data->mc = pti_request_masterchannel(2);
 
-		if (pti_tty_data->mc == NULL)
+		if (pti_tty_data->mc == NULL) {
+			kfree(pti_tty_data);
 			return -ENXIO;
+		}
 		tty->driver_data = pti_tty_data;
 	}
 
@@ -495,7 +498,7 @@ static void pti_tty_cleanup(struct tty_struct *tty)
 	if (pti_tty_data == NULL)
 		return;
 	pti_release_masterchannel(pti_tty_data->mc);
-	kfree(tty->driver_data);
+	kfree(pti_tty_data);
 	tty->driver_data = NULL;
 }
 
@@ -581,7 +584,7 @@ static int pti_char_open(struct inode *inode, struct file *filp)
 static int pti_char_release(struct inode *inode, struct file *filp)
 {
 	pti_release_masterchannel(filp->private_data);
-	kfree(filp->private_data);
+	filp->private_data = NULL;
 	return 0;
 }
 

drivers/misc/ti-st/st_core.c

@@ -605,7 +605,7 @@ long st_unregister(struct st_proto_s *proto)
 	pr_debug("%s: %d ", __func__, proto->chnl_id);
 
 	st_kim_ref(&st_gdata, 0);
-	if (proto->chnl_id >= ST_MAX_CHANNELS) {
+	if (!st_gdata || proto->chnl_id >= ST_MAX_CHANNELS) {
 		pr_err(" chnl_id %d not supported", proto->chnl_id);
 		return -EPROTONOSUPPORT;
 	}

drivers/misc/ti-st/st_kim.c

@@ -245,9 +245,9 @@ void skip_change_remote_baud(unsigned char **ptr, long *len)
 		pr_err("invalid action after change remote baud command");
 	} else {
 		*ptr = *ptr + sizeof(struct bts_action) +
-			((struct bts_action *)nxt_action)->size;
+			((struct bts_action *)cur_action)->size;
 		*len = *len - (sizeof(struct bts_action) +
-				((struct bts_action *)nxt_action)->size);
+				((struct bts_action *)cur_action)->size);
 		/* warn user on not commenting these in firmware */
 		pr_warn("skipping the wait event of change remote baud");
 	}
@@ -604,6 +604,10 @@ void st_kim_ref(struct st_data_s **core_data, int id)
 	struct kim_data_s	*kim_gdata;
 	/* get kim_gdata reference from platform device */
 	pdev = st_get_plat_device(id);
+	if (!pdev) {
+		*core_data = NULL;
+		return;
+	}
 	kim_gdata = dev_get_drvdata(&pdev->dev);
 	*core_data = kim_gdata->core_data;
 }

drivers/mmc/card/block.c

@@ -1024,7 +1024,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 	INIT_LIST_HEAD(&md->part);
 	md->usage = 1;
 
-	ret = mmc_init_queue(&md->queue, card, &md->lock);
+	ret = mmc_init_queue(&md->queue, card, &md->lock, subname);
 	if (ret)
 		goto err_putdisk;
 
@@ -1297,6 +1297,9 @@ static void mmc_blk_remove(struct mmc_card *card)
 	struct mmc_blk_data *md = mmc_get_drvdata(card);
 
 	mmc_blk_remove_parts(card, md);
+	mmc_claim_host(card->host);
+	mmc_blk_part_switch(card, md);
+	mmc_release_host(card->host);
 	mmc_blk_remove_req(md);
 	mmc_set_drvdata(card, NULL);
 }

drivers/mmc/card/queue.c

@@ -106,10 +106,12 @@ static void mmc_request(struct request_queue *q)
  * @mq: mmc queue
  * @card: mmc card to attach this queue
  * @lock: queue lock
+ * @subname: partition subname
  *
  * Initialise a MMC card request queue.
  */
-int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock)
+int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
+		   spinlock_t *lock, const char *subname)
 {
 	struct mmc_host *host = card->host;
 	u64 limit = BLK_BOUNCE_HIGH;
@@ -133,12 +135,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
 		mq->queue->limits.max_discard_sectors = UINT_MAX;
 		if (card->erased_byte == 0)
 			mq->queue->limits.discard_zeroes_data = 1;
-		if (!mmc_can_trim(card) && is_power_of_2(card->erase_size)) {
+		mq->queue->limits.discard_granularity = card->pref_erase << 9;
-			mq->queue->limits.discard_granularity =
-							card->erase_size << 9;
-			mq->queue->limits.discard_alignment =
-							card->erase_size << 9;
-		}
 		if (mmc_can_secure_erase_trim(card))
 			queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD,
 						mq->queue);
@@ -209,8 +206,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
 
 	sema_init(&mq->thread_sem, 1);
 
-	mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d",
+	mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s",
-		host->index);
+		host->index, subname ? subname : "");
 
 	if (IS_ERR(mq->thread)) {
 		ret = PTR_ERR(mq->thread);

drivers/mmc/card/queue.h

@@ -19,7 +19,8 @@ struct mmc_queue {
 	unsigned int		bounce_sg_len;
 };
 
-extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
+extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
+			  const char *);
 extern void mmc_cleanup_queue(struct mmc_queue *);
 extern void mmc_queue_suspend(struct mmc_queue *);
 extern void mmc_queue_resume(struct mmc_queue *);

drivers/mmc/core/core.c

@@ -1245,7 +1245,7 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card,
 		 */
 		timeout_clks <<= 1;
 		timeout_us += (timeout_clks * 1000) /
-			      (card->host->ios.clock / 1000);
+			      (mmc_host_clk_rate(card->host) / 1000);
 
 		erase_timeout = timeout_us / 1000;
 

drivers/mmc/core/sdio.c

@@ -691,15 +691,54 @@ static int mmc_sdio_resume(struct mmc_host *host)
 static int mmc_sdio_power_restore(struct mmc_host *host)
 {
 	int ret;
+	u32 ocr;
 
 	BUG_ON(!host);
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
+
+	/*
+	 * Reset the card by performing the same steps that are taken by
+	 * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
+	 *
+	 * sdio_reset() is technically not needed. Having just powered up the
+	 * hardware, it should already be in reset state. However, some
+	 * platforms (such as SD8686 on OLPC) do not instantly cut power,
+	 * meaning that a reset is required when restoring power soon after
+	 * powering off. It is harmless in other cases.
+	 *
+	 * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
+	 * is not necessary for non-removable cards. However, it is required
+	 * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
+	 * harmless in other situations.
+	 *
+	 * With these steps taken, mmc_select_voltage() is also required to
+	 * restore the correct voltage setting of the card.
+	 */
+	sdio_reset(host);
+	mmc_go_idle(host);
+	mmc_send_if_cond(host, host->ocr_avail);
+
+	ret = mmc_send_io_op_cond(host, 0, &ocr);
+	if (ret)
+		goto out;
+
+	if (host->ocr_avail_sdio)
+		host->ocr_avail = host->ocr_avail_sdio;
+
+	host->ocr = mmc_select_voltage(host, ocr & ~0x7F);
+	if (!host->ocr) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	ret = mmc_sdio_init_card(host, host->ocr, host->card,
 				mmc_card_keep_power(host));
 	if (!ret && host->sdio_irqs)
 		mmc_signal_sdio_irq(host);
+
+out:
 	mmc_release_host(host);
 
 	return ret;

drivers/mmc/core/sdio_bus.c

@@ -189,7 +189,7 @@ static int sdio_bus_remove(struct device *dev)
 
 	/* Then undo the runtime PM settings in sdio_bus_probe() */
 	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
-		pm_runtime_put_noidle(dev);
+		pm_runtime_put_sync(dev);
 
 out:
 	return ret;

drivers/mmc/host/of_mmc_spi.c

@@ -25,6 +25,11 @@
 #include <linux/mmc/core.h>
 #include <linux/mmc/host.h>
 
+/* For archs that don't support NO_IRQ (such as mips), provide a dummy value */
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
 MODULE_LICENSE("GPL");
 
 enum {

drivers/mmc/host/omap_hsmmc.c

@@ -429,7 +429,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 				return -EINVAL;
 			}
 		}
-		mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg);
 
 		/* Allow an aux regulator */
 		reg = regulator_get(host->dev, "vmmc_aux");
@@ -962,7 +961,8 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno)
 	spin_unlock(&host->irq_lock);
 
 	if (host->use_dma && dma_ch != -1) {
-		dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
+		dma_unmap_sg(mmc_dev(host->mmc), host->data->sg,
+			host->data->sg_len,
 			omap_hsmmc_get_dma_dir(host, host->data));
 		omap_free_dma(dma_ch);
 	}
@@ -1346,7 +1346,7 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data)
 		return;
 	}
 
-	dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
 		omap_hsmmc_get_dma_dir(host, data));
 
 	req_in_progress = host->req_in_progress;

drivers/mmc/host/sh_mobile_sdhi.c

@@ -92,7 +92,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 		mmc_data->ocr_mask = p->tmio_ocr_mask;
 		mmc_data->capabilities |= p->tmio_caps;
 
-		if (p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) {
+		if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) {
 			priv->param_tx.slave_id = p->dma_slave_tx;
 			priv->param_rx.slave_id = p->dma_slave_rx;
 			priv->dma_priv.chan_priv_tx = &priv->param_tx;
@@ -165,13 +165,14 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
 
 	p->pdata = NULL;
 
+	tmio_mmc_host_remove(host);
+
 	for (i = 0; i < 3; i++) {
 		irq = platform_get_irq(pdev, i);
 		if (irq >= 0)
 			free_irq(irq, host);
 	}
 
-	tmio_mmc_host_remove(host);
 	clk_disable(priv->clk);
 	clk_put(priv->clk);
 	kfree(priv);

drivers/mmc/host/tmio_mmc_pio.c

@@ -824,8 +824,8 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc)
 	struct tmio_mmc_host *host = mmc_priv(mmc);
 	struct tmio_mmc_data *pdata = host->pdata;
 
-	return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
+	return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
-		!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
+		 (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
 }
 
 static int tmio_mmc_get_cd(struct mmc_host *mmc)

drivers/mmc/host/vub300.c

@@ -2096,7 +2096,7 @@ static struct mmc_host_ops vub300_mmc_ops = {
 static int vub300_probe(struct usb_interface *interface,
 			const struct usb_device_id *id)
 {				/* NOT irq */
-	struct vub300_mmc_host *vub300 = NULL;
+	struct vub300_mmc_host *vub300;
 	struct usb_host_interface *iface_desc;
 	struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
 	int i;
@@ -2118,23 +2118,20 @@ static int vub300_probe(struct usb_interface *interface,
 	command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!command_out_urb) {
 		retval = -ENOMEM;
-		dev_err(&vub300->udev->dev,
+		dev_err(&udev->dev, "not enough memory for command_out_urb\n");
-			"not enough memory for the command_out_urb\n");
 		goto error0;
 	}
 	command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!command_res_urb) {
 		retval = -ENOMEM;
-		dev_err(&vub300->udev->dev,
+		dev_err(&udev->dev, "not enough memory for command_res_urb\n");
-			"not enough memory for the command_res_urb\n");
 		goto error1;
 	}
 	/* this also allocates memory for our VUB300 mmc host device */
 	mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev);
 	if (!mmc) {
 		retval = -ENOMEM;
-		dev_err(&vub300->udev->dev,
+		dev_err(&udev->dev, "not enough memory for the mmc_host\n");
-			"not enough memory for the mmc_host\n");
 		goto error4;
 	}
 	/* MMC core transfer sizes tunable parameters */

drivers/pci/pci-driver.c

@@ -624,7 +624,7 @@ static int pci_pm_prepare(struct device *dev)
 	 * system from the sleep state, we'll have to prevent it from signaling
 	 * wake-up.
 	 */
-	pm_runtime_resume(dev);
+	pm_runtime_get_sync(dev);
 
 	if (drv && drv->pm && drv->pm->prepare)
 		error = drv->pm->prepare(dev);
@@ -638,6 +638,8 @@ static void pci_pm_complete(struct device *dev)
 
 	if (drv && drv->pm && drv->pm->complete)
 		drv->pm->complete(dev);
+
+	pm_runtime_put_sync(dev);
 }
 
 #else /* !CONFIG_PM_SLEEP */

drivers/pci/pci.c

@@ -3284,7 +3284,7 @@ static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
  * @dev: the PCI device
  * @decode: true = enable decoding, false = disable decoding
  * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
- * @change_bridge_flags: traverse ancestors and change bridges
+ * @flags: traverse ancestors and change bridges
  * CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE
  */
 int pci_set_vga_state(struct pci_dev *dev, bool decode,

drivers/pci/probe.c

@@ -168,7 +168,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 		res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
 		if (type == pci_bar_io) {
 			l &= PCI_BASE_ADDRESS_IO_MASK;
-			mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT;
+			mask = PCI_BASE_ADDRESS_IO_MASK & (u32) IO_SPACE_LIMIT;
 		} else {
 			l &= PCI_BASE_ADDRESS_MEM_MASK;
 			mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;

drivers/pci/quirks.c

@@ -2761,6 +2761,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
 #endif /*CONFIG_MMC_RICOH_MMC*/
 
 #if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)

drivers/rtc/rtc-ds1307.c

@@ -149,6 +149,7 @@ static const struct i2c_device_id ds1307_id[] = {
 	{ "ds1340", ds_1340 },
 	{ "ds3231", ds_3231 },
 	{ "m41t00", m41t00 },
+	{ "pt7c4338", ds_1307 },
 	{ "rx8025", rx_8025 },
 	{ }
 };

drivers/rtc/rtc-vt8500.c

@@ -78,7 +78,6 @@ struct vt8500_rtc {
 	void __iomem		*regbase;
 	struct resource		*res;
 	int			irq_alarm;
-	int			irq_hz;
 	struct rtc_device	*rtc;
 	spinlock_t		lock;		/* Protects this structure */
 };
@@ -100,10 +99,6 @@ static irqreturn_t vt8500_rtc_irq(int irq, void *dev_id)
 	if (isr & 1)
 		events |= RTC_AF | RTC_IRQF;
 
-	/* Only second/minute interrupts are supported */
-	if (isr & 2)
-		events |= RTC_UF | RTC_IRQF;
-
 	rtc_update_irq(vt8500_rtc->rtc, 1, events);
 
 	return IRQ_HANDLED;
@@ -199,27 +194,12 @@ static int vt8500_alarm_irq_enable(struct device *dev, unsigned int enabled)
 	return 0;
 }
 
-static int vt8500_update_irq_enable(struct device *dev, unsigned int enabled)
-{
-	struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev);
-	unsigned long tmp = readl(vt8500_rtc->regbase + VT8500_RTC_CR);
-
-	if (enabled)
-		tmp |= VT8500_RTC_CR_SM_SEC | VT8500_RTC_CR_SM_ENABLE;
-	else
-		tmp &= ~VT8500_RTC_CR_SM_ENABLE;
-
-	writel(tmp, vt8500_rtc->regbase + VT8500_RTC_CR);
-	return 0;
-}
-
 static const struct rtc_class_ops vt8500_rtc_ops = {
 	.read_time = vt8500_rtc_read_time,
 	.set_time = vt8500_rtc_set_time,
 	.read_alarm = vt8500_rtc_read_alarm,
 	.set_alarm = vt8500_rtc_set_alarm,
 	.alarm_irq_enable = vt8500_alarm_irq_enable,
-	.update_irq_enable = vt8500_update_irq_enable,
 };
 
 static int __devinit vt8500_rtc_probe(struct platform_device *pdev)
@@ -248,13 +228,6 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev)
 		goto err_free;
 	}
 
-	vt8500_rtc->irq_hz = platform_get_irq(pdev, 1);
-	if (vt8500_rtc->irq_hz < 0) {
-		dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n");
-		ret = -ENXIO;
-		goto err_free;
-	}
-
 	vt8500_rtc->res = request_mem_region(vt8500_rtc->res->start,
 					     resource_size(vt8500_rtc->res),
 					     "vt8500-rtc");
@@ -272,9 +245,8 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev)
 		goto err_release;
 	}
 
-	/* Enable the second/minute interrupt generation and enable RTC */
+	/* Enable RTC and set it to 24-hour mode */
-	writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H
+	writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H,
-		| VT8500_RTC_CR_SM_ENABLE | VT8500_RTC_CR_SM_SEC,
 	       vt8500_rtc->regbase + VT8500_RTC_CR);
 
 	vt8500_rtc->rtc = rtc_device_register("vt8500-rtc", &pdev->dev,
@@ -286,26 +258,16 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev)
 		goto err_unmap;
 	}
 
-	ret = request_irq(vt8500_rtc->irq_hz, vt8500_rtc_irq, 0,
-			  "rtc 1Hz", vt8500_rtc);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "can't get irq %i, err %d\n",
-			vt8500_rtc->irq_hz, ret);
-		goto err_unreg;
-	}
-
 	ret = request_irq(vt8500_rtc->irq_alarm, vt8500_rtc_irq, 0,
 			  "rtc alarm", vt8500_rtc);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "can't get irq %i, err %d\n",
 			vt8500_rtc->irq_alarm, ret);
-		goto err_free_hz;
+		goto err_unreg;
 	}
 
 	return 0;
 
-err_free_hz:
-	free_irq(vt8500_rtc->irq_hz, vt8500_rtc);
 err_unreg:
 	rtc_device_unregister(vt8500_rtc->rtc);
 err_unmap:
@@ -323,7 +285,6 @@ static int __devexit vt8500_rtc_remove(struct platform_device *pdev)
 	struct vt8500_rtc *vt8500_rtc = platform_get_drvdata(pdev);
 
 	free_irq(vt8500_rtc->irq_alarm, vt8500_rtc);
-	free_irq(vt8500_rtc->irq_hz, vt8500_rtc);
 
 	rtc_device_unregister(vt8500_rtc->rtc);
 

drivers/staging/brcm80211/Kconfig

@@ -7,6 +7,7 @@ config BRCMSMAC
 	default n
 	depends on PCI
 	depends on WLAN && MAC80211
+	depends on X86 || MIPS
 	select BRCMUTIL
 	select FW_LOADER
 	select CRC_CCITT
@@ -20,6 +21,7 @@ config BRCMFMAC
 	default n
 	depends on MMC
 	depends on WLAN && CFG80211
+	depends on X86 || MIPS
 	select BRCMUTIL
 	select FW_LOADER
 	select WIRELESS_EXT

drivers/staging/comedi/Kconfig

@@ -2,6 +2,7 @@ config COMEDI
 	tristate "Data acquisition support (comedi)"
 	default N
 	depends on m
+	depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
 	---help---
 	  Enable support a wide range of data acquisition devices
 	  for Linux.
@@ -160,6 +161,7 @@ config COMEDI_PCL730
 
 config COMEDI_PCL812
 	tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
@@ -171,6 +173,7 @@ config COMEDI_PCL812
 
 config COMEDI_PCL816
 	tristate "Advantech PCL-814 and PCL-816 ISA card support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for Advantech PCL-814 and PCL-816 ISA cards
@@ -180,6 +183,7 @@ config COMEDI_PCL816
 
 config COMEDI_PCL818
 	tristate "Advantech PCL-718 and PCL-818 ISA card support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for Advantech PCL-818 ISA cards
@@ -269,6 +273,7 @@ config COMEDI_DAS800
 
 config COMEDI_DAS1800
 	tristate "DAS1800 and compatible ISA card support"
+	depends on VIRT_TO_BUS
 	select COMEDI_FC
 	default N
 	---help---
@@ -340,6 +345,7 @@ config COMEDI_DT2817
 config COMEDI_DT282X
 	tristate "Data Translation DT2821 series and DT-EZ ISA card support"
 	select COMEDI_FC
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for Data Translation DT2821 series including DT-EZ
@@ -419,6 +425,7 @@ config COMEDI_ADQ12B
 config COMEDI_NI_AT_A2150
 	tristate "NI AT-A2150 ISA card support"
 	depends on COMEDI_NI_COMMON
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for National Instruments AT-A2150 cards
@@ -536,6 +543,7 @@ if COMEDI_PCI_DRIVERS && PCI
 
 config COMEDI_ADDI_APCI_035
 	tristate "ADDI-DATA APCI_035 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_035 cards
@@ -545,6 +553,7 @@ config COMEDI_ADDI_APCI_035
 
 config COMEDI_ADDI_APCI_1032
 	tristate "ADDI-DATA APCI_1032 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1032 cards
@@ -554,6 +563,7 @@ config COMEDI_ADDI_APCI_1032
 
 config COMEDI_ADDI_APCI_1500
 	tristate "ADDI-DATA APCI_1500 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1500 cards
@@ -563,6 +573,7 @@ config COMEDI_ADDI_APCI_1500
 
 config COMEDI_ADDI_APCI_1516
 	tristate "ADDI-DATA APCI_1516 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1516 cards
@@ -572,6 +583,7 @@ config COMEDI_ADDI_APCI_1516
 
 config COMEDI_ADDI_APCI_1564
 	tristate "ADDI-DATA APCI_1564 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1564 cards
@@ -581,6 +593,7 @@ config COMEDI_ADDI_APCI_1564
 
 config COMEDI_ADDI_APCI_16XX
 	tristate "ADDI-DATA APCI_16xx support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_16xx cards
@@ -590,6 +603,7 @@ config COMEDI_ADDI_APCI_16XX
 
 config COMEDI_ADDI_APCI_2016
 	tristate "ADDI-DATA APCI_2016 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_2016 cards
@@ -599,6 +613,7 @@ config COMEDI_ADDI_APCI_2016
 
 config COMEDI_ADDI_APCI_2032
 	tristate "ADDI-DATA APCI_2032 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_2032 cards
@@ -608,6 +623,7 @@ config COMEDI_ADDI_APCI_2032
 
 config COMEDI_ADDI_APCI_2200
 	tristate "ADDI-DATA APCI_2200 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_2200 cards
@@ -617,6 +633,7 @@ config COMEDI_ADDI_APCI_2200
 
 config COMEDI_ADDI_APCI_3001
 	tristate "ADDI-DATA APCI_3001 support"
+	depends on VIRT_TO_BUS
 	select COMEDI_FC
 	default N
 	---help---
@@ -627,6 +644,7 @@ config COMEDI_ADDI_APCI_3001
 
 config COMEDI_ADDI_APCI_3120
 	tristate "ADDI-DATA APCI_3520 support"
+	depends on VIRT_TO_BUS
 	select COMEDI_FC
 	default N
 	---help---
@@ -637,6 +655,7 @@ config COMEDI_ADDI_APCI_3120
 
 config COMEDI_ADDI_APCI_3501
 	tristate "ADDI-DATA APCI_3501 support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_3501 cards
@@ -646,6 +665,7 @@ config COMEDI_ADDI_APCI_3501
 
 config COMEDI_ADDI_APCI_3XXX
 	tristate "ADDI-DATA APCI_3xxx support"
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_3xxx cards
@@ -712,6 +732,7 @@ config COMEDI_ADL_PCI9111
 config COMEDI_ADL_PCI9118
 	tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
 	select COMEDI_FC
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
@@ -1287,6 +1308,7 @@ config COMEDI_NI_LABPC
 	depends on COMEDI_MITE
 	select COMEDI_8255
 	select COMEDI_FC
+	depends on VIRT_TO_BUS
 	default N
 	---help---
 	  Enable support for National Instruments Lab-PC and compatibles

drivers/staging/iio/Kconfig

@@ -4,7 +4,7 @@
 
 menuconfig IIO
 	tristate "Industrial I/O support"
-	depends on !S390
+	depends on GENERIC_HARDIRQS
 	help
 	  The industrial I/O subsystem provides a unified framework for
 	  drivers for many different types of embedded sensors using a

drivers/staging/iio/accel/adis16204.h

@@ -84,7 +84,6 @@ struct adis16204_state {
 
 int adis16204_set_irq(struct iio_dev *indio_dev, bool enable);
 
-#ifdef CONFIG_IIO_RING_BUFFER
 enum adis16204_scan {
 	ADIS16204_SCAN_SUPPLY,
 	ADIS16204_SCAN_ACC_X,
@@ -93,6 +92,7 @@ enum adis16204_scan {
 	ADIS16204_SCAN_TEMP,
 };
 
+#ifdef CONFIG_IIO_RING_BUFFER
 void adis16204_remove_trigger(struct iio_dev *indio_dev);
 int adis16204_probe_trigger(struct iio_dev *indio_dev);
 

drivers/staging/iio/accel/adis16209.h

@@ -121,8 +121,6 @@ struct adis16209_state {
 
 int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
 
-#ifdef CONFIG_IIO_RING_BUFFER
-
 #define ADIS16209_SCAN_SUPPLY	0
 #define ADIS16209_SCAN_ACC_X	1
 #define ADIS16209_SCAN_ACC_Y	2
@@ -132,6 +130,8 @@ int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
 #define ADIS16209_SCAN_INCLI_Y	6
 #define ADIS16209_SCAN_ROT	7
 
+#ifdef CONFIG_IIO_RING_BUFFER
+
 void adis16209_remove_trigger(struct iio_dev *indio_dev);
 int adis16209_probe_trigger(struct iio_dev *indio_dev);
 

drivers/staging/iio/gyro/adis16260.h

@@ -104,7 +104,6 @@ struct adis16260_state {
 
 int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
 
-#ifdef CONFIG_IIO_RING_BUFFER
 /* At the moment triggers are only used for ring buffer
  * filling. This may change!
  */
@@ -115,6 +114,7 @@ int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
 #define ADIS16260_SCAN_TEMP	3
 #define ADIS16260_SCAN_ANGL	4
 
+#ifdef CONFIG_IIO_RING_BUFFER
 void adis16260_remove_trigger(struct iio_dev *indio_dev);
 int adis16260_probe_trigger(struct iio_dev *indio_dev);
 

drivers/staging/iio/imu/adis16400.h

@@ -158,7 +158,6 @@ struct adis16400_state {
 
 int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
 
-#ifdef CONFIG_IIO_RING_BUFFER
 /* At the moment triggers are only used for ring buffer
  * filling. This may change!
  */
@@ -182,6 +181,7 @@ int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
 #define ADIS16300_SCAN_INCLI_X	12
 #define ADIS16300_SCAN_INCLI_Y	13
 
+#ifdef CONFIG_IIO_RING_BUFFER
 void adis16400_remove_trigger(struct iio_dev *indio_dev);
 int adis16400_probe_trigger(struct iio_dev *indio_dev);
 

drivers/staging/mei/init.c

@@ -189,7 +189,7 @@ int mei_hw_init(struct mei_device *dev)
 		mutex_lock(&dev->device_lock);
 	}
 
-	if (!err && !dev->recvd_msg) {
+	if (err <= 0 && !dev->recvd_msg) {
 		dev->mei_state = MEI_DISABLED;
 		dev_dbg(&dev->pdev->dev,
 			"wait_event_interruptible_timeout failed"

drivers/staging/mei/wd.c

@@ -169,10 +169,15 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
 	ret = wait_event_interruptible_timeout(dev->wait_stop_wd,
 					dev->wd_stopped, 10 * HZ);
 	mutex_lock(&dev->device_lock);
-	if (!dev->wd_stopped)
+	if (dev->wd_stopped) {
-		dev_dbg(&dev->pdev->dev, "stop wd failed to complete.\n");
+		dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret);
-	else
+		ret = 0;
-		dev_dbg(&dev->pdev->dev, "stop wd complete.\n");
+	} else {
+		if (!ret)
+			ret = -ETIMEDOUT;
+		dev_warn(&dev->pdev->dev,
+			"stop wd failed to complete ret=%d.\n", ret);
+	}
 
 	if (preserve)
 		dev->wd_timeout = wd_timeout;

drivers/target/loopback/tcm_loop.c

@@ -386,7 +386,7 @@ static int tcm_loop_device_reset(struct scsi_cmnd *sc)
 	 */
 	se_cmd->se_tmr_req = core_tmr_alloc_req(se_cmd, (void *)tl_tmr,
 				TMR_LUN_RESET);
-	if (!se_cmd->se_tmr_req)
+	if (IS_ERR(se_cmd->se_tmr_req))
 		goto release;
 	/*
 	 * Locate the underlying TCM struct se_lun from sc->device->lun
@@ -1017,6 +1017,7 @@ static int tcm_loop_make_nexus(
 	struct se_portal_group *se_tpg;
 	struct tcm_loop_hba *tl_hba = tl_tpg->tl_hba;
 	struct tcm_loop_nexus *tl_nexus;
+	int ret = -ENOMEM;
 
 	if (tl_tpg->tl_hba->tl_nexus) {
 		printk(KERN_INFO "tl_tpg->tl_hba->tl_nexus already exists\n");
@@ -1033,8 +1034,10 @@ static int tcm_loop_make_nexus(
 	 * Initialize the struct se_session pointer
 	 */
 	tl_nexus->se_sess = transport_init_session();
-	if (!tl_nexus->se_sess)
+	if (IS_ERR(tl_nexus->se_sess)) {
+		ret = PTR_ERR(tl_nexus->se_sess);
 		goto out;
+	}
 	/*
 	 * Since we are running in 'demo mode' this call with generate a
 	 * struct se_node_acl for the tcm_loop struct se_portal_group with the SCSI
@@ -1060,7 +1063,7 @@ static int tcm_loop_make_nexus(
 
 out:
 	kfree(tl_nexus);
-	return -ENOMEM;
+	return ret;
 }
 
 static int tcm_loop_drop_nexus(
@@ -1140,7 +1143,7 @@ static ssize_t tcm_loop_tpg_store_nexus(
 	 * the fabric protocol_id set in tcm_loop_make_scsi_hba(), and call
 	 * tcm_loop_make_nexus()
 	 */
-	if (strlen(page) > TL_WWN_ADDR_LEN) {
+	if (strlen(page) >= TL_WWN_ADDR_LEN) {
 		printk(KERN_ERR "Emulated NAA Sas Address: %s, exceeds"
 				" max: %d\n", page, TL_WWN_ADDR_LEN);
 		return -EINVAL;
@@ -1321,7 +1324,7 @@ struct se_wwn *tcm_loop_make_scsi_hba(
 	return ERR_PTR(-EINVAL);
 
 check_len:
-	if (strlen(name) > TL_WWN_ADDR_LEN) {
+	if (strlen(name) >= TL_WWN_ADDR_LEN) {
 		printk(KERN_ERR "Emulated NAA %s Address: %s, exceeds"
 			" max: %d\n", name, tcm_loop_dump_proto_id(tl_hba),
 			TL_WWN_ADDR_LEN);

drivers/target/target_core_configfs.c

@@ -304,7 +304,7 @@ struct target_fabric_configfs *target_fabric_configfs_init(
 		printk(KERN_ERR "Unable to locate passed fabric name\n");
 		return NULL;
 	}
-	if (strlen(name) > TARGET_FABRIC_NAME_SIZE) {
+	if (strlen(name) >= TARGET_FABRIC_NAME_SIZE) {
 		printk(KERN_ERR "Passed name: %s exceeds TARGET_FABRIC"
 			"_NAME_SIZE\n", name);
 		return NULL;
@@ -312,7 +312,7 @@ struct target_fabric_configfs *target_fabric_configfs_init(
 
 	tf = kzalloc(sizeof(struct target_fabric_configfs), GFP_KERNEL);
 	if (!(tf))
-		return ERR_PTR(-ENOMEM);
+		return NULL;
 
 	INIT_LIST_HEAD(&tf->tf_list);
 	atomic_set(&tf->tf_access_cnt, 0);
@@ -851,7 +851,7 @@ static ssize_t target_core_dev_wwn_store_attr_vpd_unit_serial(
 		return -EOPNOTSUPP;
 	}
 
-	if ((strlen(page) + 1) > INQUIRY_VPD_SERIAL_LEN) {
+	if (strlen(page) >= INQUIRY_VPD_SERIAL_LEN) {
 		printk(KERN_ERR "Emulated VPD Unit Serial exceeds"
 		" INQUIRY_VPD_SERIAL_LEN: %d\n", INQUIRY_VPD_SERIAL_LEN);
 		return -EOVERFLOW;
@@ -917,7 +917,7 @@ static ssize_t target_core_dev_wwn_show_attr_vpd_protocol_identifier(
 
 		transport_dump_vpd_proto_id(vpd, buf, VPD_TMP_BUF_SIZE);
 
-		if ((len + strlen(buf) > PAGE_SIZE))
+		if ((len + strlen(buf) >= PAGE_SIZE))
 			break;
 
 		len += sprintf(page+len, "%s", buf);
@@ -962,19 +962,19 @@ static ssize_t target_core_dev_wwn_show_attr_##_name(			\
 									\
 		memset(buf, 0, VPD_TMP_BUF_SIZE);			\
 		transport_dump_vpd_assoc(vpd, buf, VPD_TMP_BUF_SIZE);	\
-		if ((len + strlen(buf) > PAGE_SIZE))			\
+		if ((len + strlen(buf) >= PAGE_SIZE))			\
 			break;						\
 		len += sprintf(page+len, "%s", buf);			\
 									\
 		memset(buf, 0, VPD_TMP_BUF_SIZE);			\
 		transport_dump_vpd_ident_type(vpd, buf, VPD_TMP_BUF_SIZE); \
-		if ((len + strlen(buf) > PAGE_SIZE))			\
+		if ((len + strlen(buf) >= PAGE_SIZE))			\
 			break;						\
 		len += sprintf(page+len, "%s", buf);			\
 									\
 		memset(buf, 0, VPD_TMP_BUF_SIZE);			\
 		transport_dump_vpd_ident(vpd, buf, VPD_TMP_BUF_SIZE); \
-		if ((len + strlen(buf) > PAGE_SIZE))			\
+		if ((len + strlen(buf) >= PAGE_SIZE))			\
 			break;						\
 		len += sprintf(page+len, "%s", buf);			\
 	}								\
@@ -1299,7 +1299,7 @@ static ssize_t target_core_dev_pr_show_attr_res_pr_registered_i_pts(
 			&i_buf[0] : "", pr_reg->pr_res_key,
 			pr_reg->pr_res_generation);
 
-		if ((len + strlen(buf) > PAGE_SIZE))
+		if ((len + strlen(buf) >= PAGE_SIZE))
 			break;
 
 		len += sprintf(page+len, "%s", buf);
@@ -1496,7 +1496,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata(
 				ret = -ENOMEM;
 				goto out;
 			}
-			if (strlen(i_port) > PR_APTPL_MAX_IPORT_LEN) {
+			if (strlen(i_port) >= PR_APTPL_MAX_IPORT_LEN) {
 				printk(KERN_ERR "APTPL metadata initiator_node="
 					" exceeds PR_APTPL_MAX_IPORT_LEN: %d\n",
 					PR_APTPL_MAX_IPORT_LEN);
@@ -1510,7 +1510,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata(
 				ret = -ENOMEM;
 				goto out;
 			}
-			if (strlen(isid) > PR_REG_ISID_LEN) {
+			if (strlen(isid) >= PR_REG_ISID_LEN) {
 				printk(KERN_ERR "APTPL metadata initiator_isid"
 					"= exceeds PR_REG_ISID_LEN: %d\n",
 					PR_REG_ISID_LEN);
@@ -1571,7 +1571,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata(
 				ret = -ENOMEM;
 				goto out;
 			}
-			if (strlen(t_port) > PR_APTPL_MAX_TPORT_LEN) {
+			if (strlen(t_port) >= PR_APTPL_MAX_TPORT_LEN) {
 				printk(KERN_ERR "APTPL metadata target_node="
 					" exceeds PR_APTPL_MAX_TPORT_LEN: %d\n",
 					PR_APTPL_MAX_TPORT_LEN);
@@ -3052,7 +3052,7 @@ static struct config_group *target_core_call_addhbatotarget(
 	int ret;
 
 	memset(buf, 0, TARGET_CORE_NAME_MAX_LEN);
-	if (strlen(name) > TARGET_CORE_NAME_MAX_LEN) {
+	if (strlen(name) >= TARGET_CORE_NAME_MAX_LEN) {
 		printk(KERN_ERR "Passed *name strlen(): %d exceeds"
 			" TARGET_CORE_NAME_MAX_LEN: %d\n", (int)strlen(name),
 			TARGET_CORE_NAME_MAX_LEN);

drivers/target/target_core_device.c

@@ -192,7 +192,7 @@ int transport_get_lun_for_tmr(
 			&SE_NODE_ACL(se_sess)->device_list[unpacked_lun];
 	if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) {
 		se_lun = se_cmd->se_lun = se_tmr->tmr_lun = deve->se_lun;
-		dev = se_tmr->tmr_dev = se_lun->lun_se_dev;
+		dev = se_lun->lun_se_dev;
 		se_cmd->pr_res_key = deve->pr_res_key;
 		se_cmd->orig_fe_lun = unpacked_lun;
 		se_cmd->se_orig_obj_ptr = SE_LUN(se_cmd)->lun_se_dev;
@@ -216,6 +216,7 @@ int transport_get_lun_for_tmr(
 		se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
 		return -1;
 	}
+	se_tmr->tmr_dev = dev;
 
 	spin_lock(&dev->se_tmr_lock);
 	list_add_tail(&se_tmr->tmr_list, &dev->dev_tmr_list);
@@ -1430,7 +1431,7 @@ struct se_lun_acl *core_dev_init_initiator_node_lun_acl(
 	struct se_lun_acl *lacl;
 	struct se_node_acl *nacl;
 
-	if (strlen(initiatorname) > TRANSPORT_IQN_LEN) {
+	if (strlen(initiatorname) >= TRANSPORT_IQN_LEN) {
 		printk(KERN_ERR "%s InitiatorName exceeds maximum size.\n",
 			TPG_TFO(tpg)->get_fabric_name());
 		*ret = -EOVERFLOW;

drivers/target/target_core_pr.c

@@ -1916,7 +1916,7 @@ static int __core_scsi3_update_aptpl_buf(
 				pr_reg->pr_res_mapped_lun);
 		}
 
-		if ((len + strlen(tmp) > pr_aptpl_buf_len)) {
+		if ((len + strlen(tmp) >= pr_aptpl_buf_len)) {
 			printk(KERN_ERR "Unable to update renaming"
 				" APTPL metadata\n");
 			spin_unlock(&T10_RES(su_dev)->registration_lock);
@@ -1934,7 +1934,7 @@ static int __core_scsi3_update_aptpl_buf(
 			TPG_TFO(tpg)->tpg_get_tag(tpg),
 			lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count);
 
-		if ((len + strlen(tmp) > pr_aptpl_buf_len)) {
+		if ((len + strlen(tmp) >= pr_aptpl_buf_len)) {
 			printk(KERN_ERR "Unable to update renaming"
 				" APTPL metadata\n");
 			spin_unlock(&T10_RES(su_dev)->registration_lock);
@@ -1986,7 +1986,7 @@ static int __core_scsi3_write_aptpl_to_file(
 	memset(iov, 0, sizeof(struct iovec));
 	memset(path, 0, 512);
 
-	if (strlen(&wwn->unit_serial[0]) > 512) {
+	if (strlen(&wwn->unit_serial[0]) >= 512) {
 		printk(KERN_ERR "WWN value for struct se_device does not fit"
 			" into path buffer\n");
 		return -1;

drivers/target/target_core_tmr.c

@@ -75,10 +75,16 @@ void core_tmr_release_req(
 {
 	struct se_device *dev = tmr->tmr_dev;
 
+	if (!dev) {
+		kmem_cache_free(se_tmr_req_cache, tmr);
+		return;
+	}
+
 	spin_lock(&dev->se_tmr_lock);
 	list_del(&tmr->tmr_list);
-	kmem_cache_free(se_tmr_req_cache, tmr);
 	spin_unlock(&dev->se_tmr_lock);
+
+	kmem_cache_free(se_tmr_req_cache, tmr);
 }
 
 static void core_tmr_handle_tas_abort(

drivers/target/target_core_transport.c

@@ -536,13 +536,13 @@ EXPORT_SYMBOL(transport_register_session);
 void transport_deregister_session_configfs(struct se_session *se_sess)
 {
 	struct se_node_acl *se_nacl;
-
+	unsigned long flags;
 	/*
 	 * Used by struct se_node_acl's under ConfigFS to locate active struct se_session
 	 */
 	se_nacl = se_sess->se_node_acl;
 	if ((se_nacl)) {
-		spin_lock_irq(&se_nacl->nacl_sess_lock);
+		spin_lock_irqsave(&se_nacl->nacl_sess_lock, flags);
 		list_del(&se_sess->sess_acl_list);
 		/*
 		 * If the session list is empty, then clear the pointer.
@@ -556,7 +556,7 @@ void transport_deregister_session_configfs(struct se_session *se_sess)
 					se_nacl->acl_sess_list.prev,
 					struct se_session, sess_acl_list);
 		}
-		spin_unlock_irq(&se_nacl->nacl_sess_lock);
+		spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags);
 	}
 }
 EXPORT_SYMBOL(transport_deregister_session_configfs);