From 8cf8b87b73993980d703d71bd84bd8ab7c2898e4 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 30 Jul 2017 22:41:44 +0200 Subject: [PATCH] net: phy: marvell: tabification Convert spaces to tabs where appropriate, and fix up some otherwise odd indentation. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 5d314f143aea..6a5256ceb11e 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -108,24 +108,24 @@ #define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6) /* Copper Specific Interrupt Enable Register */ -#define MII_88E1318S_PHY_CSIER 0x12 +#define MII_88E1318S_PHY_CSIER 0x12 /* WOL Event Interrupt Enable */ -#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7) +#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7) /* LED Timer Control Register */ -#define MII_88E1318S_PHY_LED_TCR 0x12 -#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) -#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) -#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) +#define MII_88E1318S_PHY_LED_TCR 0x12 +#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) +#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) +#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) /* Magic Packet MAC address registers */ -#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17 -#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18 -#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19 +#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17 +#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18 +#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19 -#define MII_88E1318S_PHY_WOL_CTRL 0x10 -#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12) -#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14) +#define MII_88E1318S_PHY_WOL_CTRL 0x10 +#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12) +#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14) #define MII_88E1121_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_DEF 0x0030 @@ -152,7 +152,7 @@ #define LPA_FIBER_1000HALF 0x40 #define LPA_FIBER_1000FULL 0x20 -#define LPA_PAUSE_FIBER 0x180 +#define LPA_PAUSE_FIBER 0x180 #define LPA_PAUSE_ASYM_FIBER 0x100 #define ADVERTISE_FIBER_1000HALF 0x40 @@ -596,7 +596,7 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev) if (changed == 0) { /* Advertisement hasn't changed, but maybe aneg was never on to - * begin with? Or maybe phy was isolated? + * begin with? Or maybe phy was isolated? */ int ctl = phy_read(phydev, MII_BMCR); @@ -1515,7 +1515,7 @@ static void marvell_get_strings(struct phy_device *phydev, u8 *data) } #ifndef UINT64_MAX -#define UINT64_MAX (u64)(~((u64)0)) +#define UINT64_MAX (u64)(~((u64)0)) #endif static u64 marvell_get_stat(struct phy_device *phydev, int i) {