leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Qualcomm DTS updates for v5.20

Browse Source 
This adds USB, NAND, QPIC BAM, CPUfreq, remoteprocs, SMEM, SCM,
 watchdog, interconnect providers to the SDX65 5G modem platform and
 enables relevant devices for the MTP.
 
 The BAM DMUX interface used to exchange Ethernet/IP data with the modem
 is described on the MSM8974 platform.
 
 It fixes up the PXO supply clock to L2CC on IPQ6084, as the platform is
 transitioned away from global clock lookup.
 
 SDX55 has it's debug UART interrupt level corrected.
 
 Lastly it contains a wide variety of fixes for DeviceTree validation
 issues across most of the platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmLOOckbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FOqgP/RVm+S3ivwLGm4XeQekp
 Ur00x2qzJUpORdE5n+rN77zwOcXYu8z2J6HaeyMDk+yR5CdUM6MRLVkrkcxWJuE3
 OHuDOcBve0vVy66E0GN6ODNf3tzCD8OoLkk9ZDpTuPRVFQAh1w/XkycBDzH43MRR
 tg/Abs9Jbn+gInQXBVeWqCWqTRV8o9iZnDrWX5usuIwllMZuA+UErOsYwFt4UaVt
 z2zybKF1FeXy5qSEvV1ztxVV2prbQDo/3TTdF1zlNCpWQUkuF/2qSq593YK8HP6i
 SW7DMM70PDd7HM2+lo7PLfwZFH5i03uvuN4zf7bopidFl1Si8zQdkesELjVgIQJW
 jHF8cHnVGR+yFtMIJdkX3VGMPYjTkcWWnQZko57QMHgSAbcFTnHHEiEl43F1HteR
 pONnUFBfxdFPZcOZwCVOlu82KTaxbHhg10mztxY4M62+lx7TeZQs2Nb97SjfkeB+
 CHBgNx3cgGq0EISVN4eq6Ensm5OfVwYlbuKSKENbfUTArVH5OuTSRnCvP8H/Q4xF
 GW1jVvj0Z0RwrgYwdzp4+urWo6I/nQOy6xyn1ADiZLcNMl93puMOxiptqSAvF2+q
 AdMEOPqW75huhKn0QUhQ/LpgyErpJQSa4evY39XSq+/ooXyEeZQqAPd9rpkGwkUx
 /9ebhOjKaAC5nacz1gQ6Iewc
 =nI02
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLPKQ0ACgkQmmx57+YA
 GNnpzhAAwVu/z/Vk1IHvi0xQ7casMKawTQfALkZIvtbvPkO/hfjwznjuu9hhVnih
 NF2EJ/VdGPXmstv9hlgeLmf8oKHVTf49bWup3/Dx7HrohTpJLBP+yIDSpJHnWF4z
 ggfQYQ+rsgYpyIV6euiIptz4fPBviyI2FAsDut58IqYQjMNw1GY8V1ghXtuE6Sys
 dS1V37JGOYLWexFUMMgsHnYGN6v4xgDby0HzE6UXN0QlBdqt6b1HZdgoxmLiP15Q
 0lzbPTIngQhO4UnO1Ijv/mIawSpLmW29EGcRp5VVmYeHhCNE1/nLWmwJ6V9IaRWL
 iVWsvzVqUCDBmSIlOEb8dWEbjO/3Yilsn1bUmmjFPQodz3WnSF1afrPin2Qjx8I5
 tJYANKfQcrcgpDKcqIeHswQoaSw3IGfxrl+/hyshO/jLl9gQN8PXfgwWcNcanX18
 60UMzVK66L48wE+5BmtohXl+47jLl6/4WJ/bkBEU2AA+aovJItuSqZbNqkNOJhp1
 mgORzfZ3yol9rIJhUIIn8JNcz5exQNGgVCLL/3F03Q/9MpXirqmJFg0pmRVWmgNk
 E2HitHbiHoxlygolCX1T/cM1aDi2DstdAzTBGlPBbT2UFSISfpK/uK6iRqx9QrKi
 npCWiBzKg231yDTEwNn1j/SrCuph/+PeRUE+K0MK7npc8Lmj7W8=
 =gckS
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm DTS updates for v5.20

This adds USB, NAND, QPIC BAM, CPUfreq, remoteprocs, SMEM, SCM,
watchdog, interconnect providers to the SDX65 5G modem platform and
enables relevant devices for the MTP.

The BAM DMUX interface used to exchange Ethernet/IP data with the modem
is described on the MSM8974 platform.

It fixes up the PXO supply clock to L2CC on IPQ6084, as the platform is
transitioned away from global clock lookup.

SDX55 has it's debug UART interrupt level corrected.

Lastly it contains a wide variety of fixes for DeviceTree validation
issues across most of the platforms.

* tag 'qcom-dts-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
  ARM: dts: qcom: msm8974: rename GPU's OPP table node
  ARM: dts: qcom: apq8064: disable DSI and DSI PHY by default
  ARM: dts: qcom: apq8064: rename DSI PHY iface clock
  ARM: dts: qcom: extend scm compatible to match dt-schema
  ARM: dts: qcom: Fix sdhci node names - use 'mmc@'
  ARM: dts: qcom: apq8064: drop phy-names from HDMI device node
  ARM: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply
  ARM: dts: qcom: pm8841: add required thermal-sensor-cells
  ARM: dts: qcom: msm8974: add required ranges to OCMEM
  ARM: dts: qcom: sdx55: add dedicated IMEM and syscon compatibles
  ARM: dts: qcom: msm8974: add dedicated IMEM compatible
  ARM: dts: qcom: apq8064-asus-nexus7: add dedicated IMEM compatible
  ARM: dts: qcom: use generic sram as name for imem and ocmem nodes
  ARM: dts: qcom: ipq8064: add function to LED nodes
  ARM: dts: qcom: ipq8064-rb3011: add color to LED node
  ARM: dts: qcom: ipq4018-ap120c-ac: add function and color to LED nodes
  ARM: dts: qcom: apq8060-ifc6410: add color to LED node
  ARM: dts: qcom: apq8060-dragonboard: add function and color to LED nodes
  ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UART
  ARM: dts: qcom-msm8974: fix irq type on blsp2_uart1
  ...

Link: https://lore.kernel.org/r/20220713032024.1372427-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2022-07-13 22:20:28 +02:00
commit 8c1e9736c5
34 changed files with 678 additions and 309 deletions

25
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include "qcom-msm8660.dtsi"
@ -273,7 +274,7 @@
};
gpio@150 {
dragon_ethernet_gpios: ethernet-gpios {
dragon_ethernet_gpios: ethernet-state {
pinconf {
pins = "gpio7";
function = "normal";
@ -282,7 +283,7 @@
power-source = <PM8058_GPIO_S3>;
};
};
dragon_bmp085_gpios: bmp085-gpios {
dragon_bmp085_gpios: bmp085-state {
pinconf {
pins = "gpio16";
function = "normal";
@ -291,7 +292,7 @@
power-source = <PM8058_GPIO_S3>;
};
};
dragon_mpu3050_gpios: mpu3050-gpios {
dragon_mpu3050_gpios: mpu3050-state {
pinconf {
pins = "gpio17";
function = "normal";
@ -300,7 +301,7 @@
power-source = <PM8058_GPIO_S3>;
};
};
dragon_sdcc3_gpios: sdcc3-gpios {
dragon_sdcc3_gpios: sdcc3-state {
pinconf {
pins = "gpio22";
function = "normal";
@ -309,7 +310,7 @@
power-source = <PM8058_GPIO_S3>;
};
};
dragon_sdcc5_gpios: sdcc5-gpios {
dragon_sdcc5_gpios: sdcc5-state {
pinconf {
pins = "gpio26";
function = "normal";
@ -319,7 +320,7 @@
power-source = <PM8058_GPIO_S3>;
};
};
dragon_ak8975_gpios: ak8975-gpios {
dragon_ak8975_gpios: ak8975-state {
pinconf {
pins = "gpio33";
function = "normal";
@ -328,9 +329,9 @@
power-source = <PM8058_GPIO_S3>;
};
};
dragon_cm3605_gpios: cm3605-gpios {
dragon_cm3605_gpios: cm3605-state {
/* Pin 34 connected to the proxy IRQ */
pinconf_gpio34 {
gpio34-pins {
pins = "gpio34";
function = "normal";
input-enable;
@ -338,7 +339,7 @@
power-source = <PM8058_GPIO_S3>;
};
/* Pin 35 connected to ASET */
pinconf_gpio35 {
gpio35-pins {
pins = "gpio35";
function = "normal";
output-high;
@ -346,7 +347,7 @@
power-source = <PM8058_GPIO_S3>;
};
};
dragon_veth_gpios: veth-gpios {
dragon_veth_gpios: veth-state {
pinconf {
pins = "gpio40";
function = "normal";
@ -416,6 +417,7 @@
compatible = "qcom,pm8058-led";
reg = <0x131>;
label = "pm8058:red";
color = <LED_COLOR_ID_RED>;
default-state = "off";
};
led@132 {
@ -426,6 +428,7 @@
compatible = "qcom,pm8058-led";
reg = <0x132>;
label = "pm8058:yellow";
color = <LED_COLOR_ID_YELLOW>;
default-state = "off";
linux,default-trigger = "mmc0";
};
@ -433,6 +436,8 @@
compatible = "qcom,pm8058-led";
reg = <0x133>;
label = "pm8058:green";
function = LED_FUNCTION_HEARTBEAT;
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
linux,default-trigger = "heartbeat";
};

24
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
View File

@ -24,9 +24,9 @@
ramoops@88d00000{
compatible = "ramoops";
reg = <0x88d00000 0x100000>;
record-size = <0x00020000>;
console-size = <0x00020000>;
ftrace-size = <0x00020000>;
record-size = <0x00020000>;
console-size = <0x00020000>;
ftrace-size = <0x00020000>;
};
};
@ -44,12 +44,12 @@
gpio-keys {
compatible = "gpio-keys";
volume_up {
key-volume-up {
label = "Volume Up";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_VOLUMEUP>;
};
volume_down {
key-volume-down {
label = "Volume Down";
gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_VOLUMEDOWN>;
@ -98,8 +98,8 @@
* tabla2x-slim-VDDIO_CDC
*/
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
regulator-always-on;
};
@ -341,17 +341,17 @@
};
};
imem@2a03f000 {
compatible = "syscon", "simple-mfd";
sram@2a03f000 {
compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
reg = <0x2a03f000 0x1000>;
reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x65c>;
mode-normal = <0x77665501>;
mode-bootloader = <0x77665500>;
mode-recovery = <0x77665502>;
mode-normal = <0x77665501>;
mode-bootloader = <0x77665500>;
mode-recovery = <0x77665502>;
};
};
};

14
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
View File

@ -82,8 +82,8 @@
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
@ -196,8 +196,8 @@
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
wlan_default_gpios: wlan-gpios {
pios {
wlan_default_gpios: wlan-gpios-state {
pinconf {
pins = "gpio43";
function = "normal";
bias-disable;
@ -230,9 +230,9 @@
sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
pinctrl-names = "default";
pinctrl-0 = <&card_detect>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&card_detect>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: mmc@121c0000 {

25
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
@ -39,6 +40,7 @@
led@1 {
label = "apq8064:green:user1";
color = <LED_COLOR_ID_GREEN>;
gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
@ -108,8 +110,8 @@
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
@ -240,8 +242,8 @@
};
sata0: sata@29000000 {
status = "okay";
target-supply = <&pm8921_s4>;
status = "okay";
target-supply = <&pm8921_s4>;
};
/* OTG */
@ -291,8 +293,8 @@
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
wlan_default_gpios: wlan-gpios {
pios {
wlan_default_gpios: wlan-gpios-state {
pinconf {
pins = "gpio43";
function = "normal";
bias-disable;
@ -300,8 +302,8 @@
};
};
notify_led: nled {
pios {
notify_led: nled-state {
pinconf {
pins = "gpio18";
function = "normal";
bias-disable;
@ -324,9 +326,9 @@
sdcc3: mmc@12180000 {
status = "okay";
vmmc-supply = <&pm8921_l6>;
pinctrl-names = "default";
pinctrl-0 = <&card_detect>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&card_detect>;
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: mmc@121c0000 {
@ -341,7 +343,6 @@
status = "okay";
core-vdda-supply = <&pm8921_hdmi_switch>;
hdmi-mux-supply = <&ext_3p3v>;
hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;

10
arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
View File

@ -23,28 +23,28 @@
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
camera-focus {
key-camera-focus {
label = "camera_focus";
gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
camera-snapshot {
key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
volume-down {
key-volume-down {
label = "volume_down";
gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
volume-up {
key-volume-up {
label = "volume_up";
gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@ -334,7 +334,7 @@
qcom,ssbi@500000 {
pmic@0 {
gpio@150 {
gpio_keys_pin_a: gpio-keys-pin-active {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio3", "gpio4", "gpio29", "gpio35";
function = "normal";

156
arch/arm/boot/dts/qcom-apq8064.dtsi
View File

@ -315,7 +315,7 @@
firmware {
scm {
compatible = "qcom,scm-apq8064";
compatible = "qcom,scm-apq8064", "qcom,scm";
clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
clock-names = "core";
@ -430,8 +430,8 @@
};
sps_sic_non_secure: sps-sic-non-secure@12100000 {
compatible = "syscon";
reg = <0x12100000 0x10000>;
compatible = "syscon";
reg = <0x12100000 0x10000>;
};
gsbi1: gsbi@12440000 {
@ -796,15 +796,15 @@
};
qfprom: qfprom@700000 {
compatible = "qcom,qfprom";
reg = <0x00700000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,apq8064-qfprom", "qcom,qfprom";
reg = <0x00700000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
tsens_calib: calib {
tsens_calib: calib@404 {
reg = <0x404 0x10>;
};
tsens_backup: backup_calib {
tsens_backup: backup_calib@414 {
reg = <0x414 0x10>;
};
};
@ -836,22 +836,22 @@
};
l2cc: clock-controller@2011000 {
compatible = "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
compatible = "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
};
rpm@108000 {
compatible = "qcom,rpm-apq8064";
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
compatible = "qcom,rpm-apq8064";
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
#clock-cells = <1>;
};
@ -1004,39 +1004,39 @@
};
sata_phy0: phy@1b400000 {
compatible = "qcom,apq8064-sata-phy";
status = "disabled";
reg = <0x1b400000 0x200>;
reg-names = "phy_mem";
clocks = <&gcc SATA_PHY_CFG_CLK>;
clock-names = "cfg";
#phy-cells = <0>;
compatible = "qcom,apq8064-sata-phy";
status = "disabled";
reg = <0x1b400000 0x200>;
reg-names = "phy_mem";
clocks = <&gcc SATA_PHY_CFG_CLK>;
clock-names = "cfg";
#phy-cells = <0>;
};
sata0: sata@29000000 {
compatible = "qcom,apq8064-ahci", "generic-ahci";
status = "disabled";
reg = <0x29000000 0x180>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
compatible = "qcom,apq8064-ahci", "generic-ahci";
status = "disabled";
reg = <0x29000000 0x180>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc SFAB_SATA_S_H_CLK>,
<&gcc SATA_H_CLK>,
<&gcc SATA_A_CLK>,
<&gcc SATA_RXOOB_CLK>,
<&gcc SATA_PMALIVE_CLK>;
clock-names = "slave_iface",
"iface",
"bus",
"rxoob",
"core_pmalive";
clocks = <&gcc SFAB_SATA_S_H_CLK>,
<&gcc SATA_H_CLK>,
<&gcc SATA_A_CLK>,
<&gcc SATA_RXOOB_CLK>,
<&gcc SATA_PMALIVE_CLK>;
clock-names = "slave_iface",
"iface",
"bus",
"rxoob",
"core_pmalive";
assigned-clocks = <&gcc SATA_RXOOB_CLK>,
<&gcc SATA_PMALIVE_CLK>;
assigned-clock-rates = <100000000>, <100000000>;
assigned-clocks = <&gcc SATA_RXOOB_CLK>,
<&gcc SATA_PMALIVE_CLK>;
assigned-clock-rates = <100000000>, <100000000>;
phys = <&sata_phy0>;
phy-names = "sata-phy";
ports-implemented = <0x1>;
phys = <&sata_phy0>;
phy-names = "sata-phy";
ports-implemented = <0x1>;
};
/* Temporary fixed regulator */
@ -1076,18 +1076,18 @@
#size-cells = <1>;
ranges;
sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
pinctrl-names = "default";
pinctrl-0 = <&sdcc1_pins>;
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
pinctrl-names = "default";
pinctrl-0 = <&sdcc1_pins>;
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
@ -1096,36 +1096,36 @@
};
sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
status = "disabled";
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
max-frequency = <192000000>;
no-1-8-v;
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
dma-names = "tx", "rx";
};
sdcc4: mmc@121c0000 {
compatible = "arm,pl18x", "arm,primecell";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x121c0000 0x2000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
status = "disabled";
reg = <0x121c0000 0x2000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
max-frequency = <48000000>;
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
@ -1271,6 +1271,8 @@
syscon-sfpb = <&mmss_sfpb>;
phys = <&dsi0_phy>;
phy-names = "dsi";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
@ -1299,9 +1301,10 @@
<0x04700300 0x200>,
<0x04700500 0x5c>;
reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
clock-names = "iface_clk", "ref";
clock-names = "iface", "ref";
clocks = <&mmcc DSI_M_AHB_CLK>,
<&pxo_board>;
status = "disabled";
};
@ -1420,7 +1423,6 @@
"slave_iface";
phys = <&hdmi_phy>;
phy-names = "hdmi-phy";
ports {
#address-cells = <1>;

10
arch/arm/boot/dts/qcom-apq8084.dtsi
View File

@ -95,7 +95,7 @@
firmware {
scm {
compatible = "qcom,scm";
compatible = "qcom,scm-apq8084", "qcom,scm";
clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
@ -240,10 +240,10 @@
};
qfprom: qfprom@fc4bc000 {
compatible = "qcom,apq8084-qfprom", "qcom,qfprom";
reg = <0xfc4bc000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qfprom";
reg = <0xfc4bc000 0x1000>;
tsens_calib: calib@d0 {
reg = <0xd0 0x18>;
};
@ -419,7 +419,7 @@
status = "disabled";
};
sdhci@f9824900 {
mmc@f9824900 {
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
@ -432,7 +432,7 @@
status = "disabled";
};
sdhci@f98a4900 {
mmc@f98a4900 {
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";

6
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
View File

@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/leds/common.h>
#include "qcom-ipq4018-ap120c-ac.dtsi"
/ {
@ -10,17 +11,22 @@
power {
label = "ap120c-ac:green:power";
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "ap120c-ac:green:wlan";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
support {
label = "ap120c-ac:green:support";
color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
panic-indicator;
};

7
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
View File

@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/leds/common.h>
#include "qcom-ipq4018-ap120c-ac.dtsi"
/ {
@ -8,18 +9,24 @@
status: status {
label = "ap120c-ac:blue:status";
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wlan2g {
label = "ap120c-ac:green:wlan2g";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "ap120c-ac:red:wlan5g";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_RED>;
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};

2
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
View File

@ -11,7 +11,7 @@
keys {
compatible = "gpio-keys";
reset {
key-reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;

2
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
View File

@ -93,7 +93,7 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "n25q128a11";
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <24000000>;
};
};

2
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
View File

@ -56,7 +56,7 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "n25q128a11";
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <24000000>;
};
};

4
arch/arm/boot/dts/qcom-ipq4019.dtsi
View File

@ -156,7 +156,7 @@
firmware {
scm {
compatible = "qcom,scm-ipq4019";
compatible = "qcom,scm-ipq4019", "qcom,scm";
};
};
@ -221,7 +221,7 @@
status = "disabled";
};
sdhci: sdhci@7824900 {
sdhci: mmc@7824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x7824900 0x11c>, <0x7824000 0x800>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;

6
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-ipq8064.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "MikroTik RB3011UiAS-RM";
@ -187,12 +188,12 @@
};
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&buttons_pins>;
pinctrl-names = "default";
button@1 {
button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
@ -208,6 +209,7 @@
led@7 {
label = "rb3011:green:user";
color = <LED_COLOR_ID_GREEN>;
gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
default-state = "off";
};

9
arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
View File

@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "qcom-ipq8064.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
@ -65,19 +66,19 @@
status = "okay";
};
gpio_keys {
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&buttons_pins>;
pinctrl-names = "default";
button@1 {
button-1 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
button@2 {
button-2 {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
@ -107,6 +108,7 @@
led@9 {
label = "status_led_fail";
function = LED_FUNCTION_STATUS;
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
@ -119,6 +121,7 @@
led@53 {
label = "status_led_pass";
function = LED_FUNCTION_STATUS;
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
default-state = "off";
};

36
arch/arm/boot/dts/qcom-ipq8064.dtsi
View File

@ -723,7 +723,7 @@
};
qfprom: qfprom@700000 {
compatible = "qcom,qfprom";
compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
reg = <0x00700000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
@ -784,7 +784,7 @@
l2cc: clock-controller@2011000 {
compatible = "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
clock-names = "pll8_vote", "pxo";
clock-output-names = "acpu_l2_aux";
};
@ -1184,16 +1184,16 @@
ranges;
sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
@ -1204,18 +1204,18 @@
};
sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
max-frequency = <192000000>;
sd-uhs-sdr104;
sd-uhs-ddr50;
vqmmc-supply = <&vsdcc_fixed>;

2
arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
View File

@ -114,7 +114,7 @@
};
&pmicgpio {
usb_vbus_5v_pins: usb_vbus_5v_pins {
usb_vbus_5v_pins: usb-vbus-5v-state {
pins = "gpio4";
function = "normal";
output-high;

7
arch/arm/boot/dts/qcom-mdm9615.dtsi
View File

@ -321,6 +321,7 @@
pmicgpio: gpio@150 {
compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
reg = <0x150>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
@ -361,7 +362,7 @@
arm,primecell-periphid = <0x00051180>;
reg = <0x12180000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
@ -381,7 +382,7 @@
status = "disabled";
reg = <0x12140000 0x2000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
interrupt-names = "cmd_irq";
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
@ -411,7 +412,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8018-regulators";

6
arch/arm/boot/dts/qcom-msm8226.dtsi
View File

@ -134,7 +134,7 @@
reg = <0xf9011000 0x1000>;
};
sdhc_1: sdhci@f9824900 {
sdhc_1: mmc@f9824900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
@ -150,7 +150,7 @@
status = "disabled";
};
sdhc_2: sdhci@f98a4900 {
sdhc_2: mmc@f98a4900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
@ -166,7 +166,7 @@
status = "disabled";
};
sdhc_3: sdhci@f9864900 {
sdhc_3: mmc@f9864900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";

110
arch/arm/boot/dts/qcom-msm8660.dtsi
View File

@ -392,24 +392,24 @@
};
l2cc: clock-controller@2082000 {
compatible = "qcom,kpss-gcc", "syscon";
reg = <0x02082000 0x1000>;
compatible = "qcom,kpss-gcc", "syscon";
reg = <0x02082000 0x1000>;
};
rpm: rpm@104000 {
compatible = "qcom,rpm-msm8660";
reg = <0x00104000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
compatible = "qcom,rpm-msm8660";
reg = <0x00104000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
clocks = <&gcc RPM_MSG_RAM_H_CLK>;
clock-names = "ram";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
#clock-cells = <1>;
};
@ -486,80 +486,80 @@
#size-cells = <1>;
ranges;
sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x8000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <48000000>;
reg = <0x12400000 0x8000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <48000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc2: mmc@12140000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12140000 0x8000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <48000000>;
reg = <0x12140000 0x8000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x8000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
status = "disabled";
reg = <0x12180000 0x8000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
max-frequency = <48000000>;
no-1-8-v;
};
sdcc4: mmc@121c0000 {
compatible = "arm,pl18x", "arm,primecell";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x121c0000 0x8000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
max-frequency = <48000000>;
status = "disabled";
reg = <0x121c0000 0x8000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
max-frequency = <48000000>;
cap-sd-highspeed;
cap-mmc-highspeed;
};
sdcc5: mmc@12200000 {
compatible = "arm,pl18x", "arm,primecell";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12200000 0x8000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
status = "disabled";
reg = <0x12200000 0x8000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <48000000>;
max-frequency = <48000000>;
};
};

54
arch/arm/boot/dts/qcom-msm8960.dtsi
View File

@ -148,19 +148,19 @@
};
l2cc: clock-controller@2011000 {
compatible = "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
compatible = "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
};
rpm@108000 {
compatible = "qcom,rpm-msm8960";
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
compatible = "qcom,rpm-msm8960";
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8921-regulators";
@ -268,16 +268,16 @@
#size-cells = <1>;
ranges;
sdcc1: mmc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x8000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
reg = <0x12400000 0x8000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <8>;
max-frequency = <96000000>;
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
@ -285,18 +285,18 @@
};
sdcc3: mmc@12180000 {
compatible = "arm,pl18x", "arm,primecell";
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00051180>;
status = "disabled";
reg = <0x12180000 0x8000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
status = "disabled";
reg = <0x12180000 0x8000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
clock-names = "mclk", "apb_pclk";
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <192000000>;
max-frequency = <192000000>;
no-1-8-v;
vmmc-supply = <&vsdcc_fixed>;
};

12
arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
View File

@ -24,14 +24,14 @@
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
volume-up {
key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
};
volume-down {
key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@ -272,7 +272,7 @@
};
&pm8941_gpios {
gpio_keys_pin_a: gpio-keys-active {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3";
function = "normal";
@ -280,7 +280,7 @@
power-source = <PM8941_GPIO_S3>;
};
fuelgauge_pin: fuelgauge-int {
fuelgauge_pin: fuelgauge-int-state {
pins = "gpio9";
function = "normal";
@ -289,7 +289,7 @@
power-source = <PM8941_GPIO_S3>;
};
wlan_sleep_clk_pin: wl-sleep-clk {
wlan_sleep_clk_pin: wl-sleep-clk-state {
pins = "gpio16";
function = "func2";
@ -297,7 +297,7 @@
power-source = <PM8941_GPIO_S3>;
};
wlan_regulator_pin: wl-reg-active {
wlan_regulator_pin: wl-reg-active-state {
pins = "gpio17";
function = "normal";

10
arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
View File

@ -20,28 +20,28 @@
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
volume-down {
key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
camera-snapshot {
key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
camera-focus {
key-camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
volume-up {
key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@ -163,7 +163,7 @@
};
&pm8941_gpios {
gpio_keys_pin_a: gpio-keys-active {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3", "gpio4", "gpio5";
function = "normal";

49
arch/arm/boot/dts/qcom-msm8974.dtsi
View File

@ -96,7 +96,7 @@
firmware {
scm {
compatible = "qcom,scm";
compatible = "qcom,scm-msm8974", "qcom,scm";
clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
@ -436,7 +436,7 @@
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
};
sdhc_1: sdhci@f9824900 {
sdhc_1: mmc@f9824900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
@ -453,7 +453,7 @@
status = "disabled";
};
sdhc_3: sdhci@f9864900 {
sdhc_3: mmc@f9864900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
@ -472,7 +472,7 @@
status = "disabled";
};
sdhc_2: sdhci@f98a4900 {
sdhc_2: mmc@f98a4900 {
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
@ -578,7 +578,7 @@
blsp2_uart1: serial@f995d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995d000 0x1000>;
interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
@ -1118,10 +1118,10 @@
};
qfprom: qfprom@fc4bc000 {
compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
reg = <0xfc4bc000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qfprom";
reg = <0xfc4bc000 0x1000>;
tsens_calib: calib@d0 {
reg = <0xd0 0x18>;
};
@ -1146,6 +1146,18 @@
#interrupt-cells = <4>;
};
bam_dmux_dma: dma-controller@fc834000 {
compatible = "qcom,bam-v1.4.0";
reg = <0xfc834000 0x7000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <0>;
num-channels = <6>;
qcom,num-ees = <1>;
qcom,powered-remotely;
};
remoteproc_mss: remoteproc@fc880000 {
compatible = "qcom,msm8974-mss-pil";
reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
@ -1180,6 +1192,20 @@
memory-region = <&mpss_region>;
};
bam_dmux: bam-dmux {
compatible = "qcom,bam-dmux";
interrupt-parent = <&modem_smsm>;
interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "pc", "pc-ack";
qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
qcom,smem-state-names = "pc", "pc-ack";
dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
dma-names = "tx", "rx";
};
smd-edge {
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
@ -1586,7 +1612,7 @@
status = "disabled";
gpu_opp_table: opp_table {
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-320000000 {
@ -1603,11 +1629,12 @@
};
};
ocmem@fdd00000 {
sram@fdd00000 {
compatible = "qcom,msm8974-ocmem";
reg = <0xfdd00000 0x2000>,
<0xfec00000 0x180000>;
reg-names = "ctrl", "mem";
ranges = <0 0xfec00000 0x180000>;
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
<&mmcc OCMEMCX_OCMEMNOC_CLK>;
clock-names = "core", "iface";
@ -1650,8 +1677,8 @@
};
};
imem: imem@fe805000 {
compatible = "syscon", "simple-mfd";
imem: sram@fe805000 {
compatible = "qcom,msm8974-imem", "syscon", "simple-mfd";
reg = <0xfe805000 0x1000>;
reboot-mode {

14
arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
View File

@ -25,7 +25,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
camera-snapshot {
key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CAMERA>;
@ -33,7 +33,7 @@
debounce-interval = <15>;
};
volume-down {
key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
@ -41,7 +41,7 @@
debounce-interval = <15>;
};
volume-up {
key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
@ -78,9 +78,9 @@
&imem {
reboot-mode {
mode-normal = <0x77665501>;
mode-bootloader = <0x77665500>;
mode-recovery = <0x77665502>;
mode-normal = <0x77665501>;
mode-bootloader = <0x77665500>;
mode-recovery = <0x77665502>;
};
};
@ -110,7 +110,7 @@
};
&pm8941_gpios {
gpio_keys_pin_a: gpio-keys-active {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio1", "gpio2", "gpio5";
function = "normal";

20
arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
View File

@ -25,7 +25,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
volume-down {
key-volume-down {
label = "volume_down";
gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@ -33,7 +33,7 @@
debounce-interval = <15>;
};
home-key {
key-home {
label = "home_key";
gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@ -42,7 +42,7 @@
debounce-interval = <15>;
};
volume-up {
key-volume-up {
label = "volume_up";
gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@ -398,7 +398,7 @@
};
&pma8084_gpios {
gpio_keys_pin_a: gpio-keys-active {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3", "gpio5";
function = "normal";
@ -406,7 +406,7 @@
power-source = <PMA8084_GPIO_S4>;
};
touchkey_pin: touchkey-int-pin {
touchkey_pin: touchkey-int-state {
pins = "gpio6";
function = "normal";
bias-disable;
@ -414,7 +414,7 @@
power-source = <PMA8084_GPIO_S4>;
};
touch_pin: touchscreen-int-pin {
touch_pin: touchscreen-int-state {
pins = "gpio8";
function = "normal";
bias-disable;
@ -422,7 +422,7 @@
power-source = <PMA8084_GPIO_S4>;
};
panel_en_pin: panel-en-pin {
panel_en_pin: panel-en-state {
pins = "gpio14";
function = "normal";
bias-pull-up;
@ -430,7 +430,7 @@
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
wlan_sleep_clk_pin: wlan-sleep-clk-pin {
wlan_sleep_clk_pin: wlan-sleep-clk-state {
pins = "gpio16";
function = "func2";
@ -439,7 +439,7 @@
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
panel_rst_pin: panel-rst-pin {
panel_rst_pin: panel-rst-state {
pins = "gpio17";
function = "normal";
bias-disable;
@ -447,7 +447,7 @@
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
fuelgauge_pin: fuelgauge-int-pin {
fuelgauge_pin: fuelgauge-int-state {
pins = "gpio21";
function = "normal";
bias-disable;

18
arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
View File

@ -24,28 +24,28 @@
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
volume-down {
key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
camera-snapshot {
key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
camera-focus {
key-camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
volume-up {
key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@ -244,7 +244,7 @@
};
&pm8941_gpios {
gpio_keys_pin_a: gpio-keys-active {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio5";
function = "normal";
@ -252,7 +252,7 @@
power-source = <PM8941_GPIO_S3>;
};
bt_reg_on_pin: bt-reg-on {
bt_reg_on_pin: bt-reg-on-state {
pins = "gpio16";
function = "normal";
@ -260,7 +260,7 @@
power-source = <PM8941_GPIO_S3>;
};
wlan_sleep_clk_pin: wl-sleep-clk {
wlan_sleep_clk_pin: wl-sleep-clk-state {
pins = "gpio17";
function = "func2";
@ -268,7 +268,7 @@
power-source = <PM8941_GPIO_S3>;
};
wlan_regulator_pin: wl-reg-active {
wlan_regulator_pin: wl-reg-active-state {
pins = "gpio18";
function = "normal";
@ -276,7 +276,7 @@
power-source = <PM8941_GPIO_S3>;
};
lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
pins = "gpio20";
function = "normal";

1
arch/arm/boot/dts/qcom-pm8841.dtsi
View File

@ -24,6 +24,7 @@
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <0>;
};
};

2
arch/arm/boot/dts/qcom-pm8941.dtsi
View File

@ -68,7 +68,7 @@
interrupt-controller;
#interrupt-cells = <2>;
boost_bypass_n_pin: boost-bypass {
boost_bypass_n_pin: boost-bypass-state {
pins = "gpio21";
function = "normal";
};

1
arch/arm/boot/dts/qcom-pmx55.dtsi
View File

@ -69,6 +69,7 @@
compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
gpio-ranges = <&pmx55_gpios 0 0 11>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;

3
arch/arm/boot/dts/qcom-pmx65.dtsi
View File

@ -21,9 +21,10 @@
};
pmx65_gpios: pinctrl@8800 {
compatible = "qcom,pmx65-gpio";
compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pmx65_gpios 0 0 16>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;

8
arch/arm/boot/dts/qcom-sdx55.dtsi
View File

@ -206,7 +206,7 @@
blsp1_uart3: serial@831000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x00831000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc 30>,
<&gcc 9>;
clock-names = "core", "iface";
@ -388,7 +388,7 @@
reg = <0x01fc0000 0x1000>;
};
sdhc_1: sdhci@8804000 {
sdhc_1: mmc@8804000 {
compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
reg = <0x08804000 0x1000>;
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
@ -561,8 +561,8 @@
#interrupt-cells = <2>;
};
imem@1468f000 {
compatible = "simple-mfd";
sram@1468f000 {
compatible = "qcom,sdx55-imem", "syscon", "simple-mfd";
reg = <0x1468f000 0x1000>;
#address-cells = <1>;

61
arch/arm/boot/dts/qcom-sdx65-mtp.dts
View File

@ -64,10 +64,6 @@
};
};
&blsp1_uart3 {
status = "ok";
};
&apps_rsc {
pmx65-rpmh-regulators {
compatible = "qcom,pmx65-rpmh-regulators";
@ -123,7 +119,7 @@
regulator-max-microvolt = <1300000>;
};
ldo1 {
vreg_l1b_1p2: ldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@ -141,13 +137,13 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
ldo4 {
vreg_l4b_0p88: ldo4 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
ldo5 {
vreg_l5b_1p8: ldo5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@ -177,7 +173,7 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
ldo10 {
vreg_l10b_3p08: ldo10 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@ -244,3 +240,52 @@
};
};
};
&blsp1_uart3 {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&qpic_nand {
status = "okay";
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
nand-bus-width = <8>;
/* ico and efs2 partitions are secured */
secure-regions = /bits/ 64 <0x500000 0x500000
0xa00000 0xb00000>;
};
};
&remoteproc_mpss {
status = "okay";
memory-region = <&mpss_adsp_mem>;
};
&usb {
status = "okay";
};
&usb_dwc3 {
dr_mode = "peripheral";
};
&usb_hsphy {
status = "okay";
vdda-pll-supply = <&vreg_l4b_0p88>;
vdda33-supply = <&vreg_l10b_3p08>;
vdda18-supply = <&vreg_l5b_1p8>;
};
&usb_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l4b_0p88>;
vdda-pll-supply = <&vreg_l1b_1p2>;
};

271
arch/arm/boot/dts/qcom-sdx65.dtsi
View File

@ -37,6 +37,12 @@
clock-output-names = "sleep_clk";
#clock-cells = <0>;
};
nand_clk_dummy: nand-clk-dummy {
compatible = "fixed-clock";
clock-frequency = <32764>;
#clock-cells = <0>;
};
};
cpus {
@ -48,9 +54,50 @@
compatible = "arm,cortex-a7";
reg = <0x0>;
enable-method = "psci";
clocks = <&apcs>;
power-domains = <&rpmhpd SDX65_CX_AO>;
power-domain-names = "rpmhpd";
operating-points-v2 = <&cpu_opp_table>;
};
};
cpu_opp_table: cpu-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-345600000 {
opp-hz = /bits/ 64 <345600000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-576000000 {
opp-hz = /bits/ 64 <576000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-1094400000 {
opp-hz = /bits/ 64 <1094400000>;
required-opps = <&rpmhpd_opp_nom>;
};
opp-1497600000 {
opp-hz = /bits/ 64 <1497600000>;
required-opps = <&rpmhpd_opp_turbo>;
};
};
firmware {
scm {
compatible = "qcom,scm-sdx65", "qcom,scm";
};
};
mc_virt: interconnect-mc-virt {
compatible = "qcom,sdx65-mc-virt";
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
@ -87,8 +134,10 @@
};
smem_mem: memory@8fe20000 {
no-map;
compatible = "qcom,smem";
reg = <0x8fe20000 0xc0000>;
hwlocks = <&tcsr_mutex 3>;
no-map;
};
cmd_db: reserved-memory@8fee0000 {
@ -113,6 +162,37 @@
};
};
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
ipa_smp2p_out: ipa-ap-to-modem {
qcom,entry-name = "ipa";
#qcom,smem-state-cells = <1>;
};
ipa_smp2p_in: ipa-modem-to-ap {
qcom,entry-name = "ipa";
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@ -124,6 +204,7 @@
reg = <0x00100000 0x001f7400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
#power-domain-cells = <1>;
#clock-cells = <1>;
#reset-cells = <1>;
};
@ -137,13 +218,120 @@
status = "disabled";
};
usb_hsphy: phy@ff4000 {
compatible = "qcom,usb-snps-hs-7nm-phy";
reg = <0xff4000 0x120>;
#phy-cells = <0>;
status = "disabled";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_BCR>;
};
usb_qmpphy: phy@ff6000 {
compatible = "qcom,sdx65-qmp-usb3-uni-phy";
reg = <0x00ff6000 0x1c8>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_EN>;
clock-names = "aux", "cfg_ahb", "ref";
resets = <&gcc GCC_USB3PHY_PHY_BCR>,
<&gcc GCC_USB3_PHY_BCR>;
reset-names = "phy", "common";
usb_ssphy: phy@ff6200 {
reg = <0x00ff6e00 0x160>,
<0x00ff7000 0x1ec>,
<0x00ff6200 0x1e00>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_uni_phy_pipe_clk_src";
};
};
system_noc: interconnect@1620000 {
compatible = "qcom,sdx65-system-noc";
reg = <0x01620000 0x31200>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
qpic_bam: dma-controller@1b04000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x01b04000 0x1c000>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rpmhcc RPMH_QPIC_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
status = "disabled";
};
qpic_nand: nand-controller@1b30000 {
compatible = "qcom,sdx55-nand";
reg = <0x01b30000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&rpmhcc RPMH_QPIC_CLK>,
<&nand_clk_dummy>;
clock-names = "core", "aon";
dmas = <&qpic_bam 0>,
<&qpic_bam 1>,
<&qpic_bam 2>;
dma-names = "tx", "rx", "cmd";
status = "disabled";
};
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01f40000 0x40000>;
#hwlock-cells = <1>;
};
sdhc_1: sdhci@8804000 {
remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sdx55-mpss-pas";
reg = <0x04080000 0x4040>;
interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack", "shutdown-ack";
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
power-domains = <&rpmhpd SDX65_CX>,
<&rpmhpd SDX65_MSS>;
power-domain-names = "cx", "mss";
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
label = "mpss";
qcom,remote-pid = <1>;
mboxes = <&apcs 15>;
};
};
sdhc_1: mmc@8804000 {
compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
reg = <0x08804000 0x1000>;
reg-names = "hc_mem";
@ -156,6 +344,61 @@
status = "disabled";
};
mem_noc: interconnect@9680000 {
compatible = "qcom,sdx65-mem-noc";
reg = <0x09680000 0x27200>;
#interconnect-cells = <1>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
usb: usb@a6f8800 {
compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
reg = <0x0a6f8800 0x400>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_USB30_MSTR_AXI_CLK>,
<&gcc GCC_USB30_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>;
clock-names = "cfg_noc", "core", "iface", "mock_utmi",
"sleep";
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 19 IRQ_TYPE_EDGE_BOTH>,
<&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 18 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
"ss_phy_irq", "dm_hs_phy_irq";
power-domains = <&gcc USB30_GDSC>;
resets = <&gcc GCC_USB30_BCR>;
usb_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0x0a600000 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x1a0 0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_hsphy>, <&usb_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
restart@c264000 {
compatible = "qcom,pshold";
reg = <0x0c264000 0x1000>;
};
spmi_bus: qcom,spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0xd00>,
@ -196,6 +439,19 @@
interrupt-controller;
};
imem@1468f000 {
compatible = "simple-mfd";
reg = <0x1468f000 0x1000>;
ranges = <0x0 0x1468f000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
pil-reloc@94c {
compatible = "qcom,pil-reloc-info";
reg = <0x94c 0xc8>;
};
};
apps_smmu: iommu@15000000 {
compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
reg = <0x15000000 0x40000>;
@ -262,6 +518,12 @@
#clock-cells = <0>;
};
watchdog@17817000 {
compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
reg = <0x17817000 0x1000>;
clocks = <&sleep_clk>;
};
timer@17820000 {
#address-cells = <1>;
#size-cells = <1>;
@ -399,6 +661,11 @@
};
};
};
apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
};
};