leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch

Browse Source 
At this moment the following is supported:
* Link state management through phylib
* Autonomous L2 forwarding managed through iproute2 bridge commands.

IP termination must be done currently through the master netdevice,
since the switch is unmanaged at this point and using
DSA_TAG_PROTO_NONE.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Vladimir Oltean 2019-05-02 23:23:30 +03:00 committed by David S. Miller
parent 554aae3500
commit 8aa9ebccae
14 changed files with 4000 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
MAINTAINERS
View File

@ -11120,6 +11120,12 @@ S: Maintained
F: Documentation/devicetree/bindings/sound/sgtl5000.txt
F: sound/soc/codecs/sgtl5000*
NXP SJA1105 ETHERNET SWITCH DRIVER
M: Vladimir Oltean <olteanv@gmail.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/net/dsa/sja1105
NXP TDA998X DRM DRIVER
M: Russell King <linux@armlinux.org.uk>
S: Maintained

2
drivers/net/dsa/Kconfig
View File

@ -51,6 +51,8 @@ source "drivers/net/dsa/microchip/Kconfig"
source "drivers/net/dsa/mv88e6xxx/Kconfig"
source "drivers/net/dsa/sja1105/Kconfig"
config NET_DSA_QCA8K
tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
depends on NET_DSA

1
drivers/net/dsa/Makefile
View File

@ -18,3 +18,4 @@ obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx.o
obj-y += b53/
obj-y += microchip/
obj-y += mv88e6xxx/
obj-y += sja1105/

16
drivers/net/dsa/sja1105/Kconfig Normal file
View File

@ -0,0 +1,16 @@
config NET_DSA_SJA1105
tristate "NXP SJA1105 Ethernet switch family support"
depends on NET_DSA && SPI
select PACKING
select CRC32
help
This is the driver for the NXP SJA1105 automotive Ethernet switch
family. These are 5-port devices and are managed over an SPI
interface. Probing is handled based on OF bindings and so is the
linkage to phylib. The driver supports the following revisions:
- SJA1105E (Gen. 1, No TT-Ethernet)
- SJA1105T (Gen. 1, TT-Ethernet)
- SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
- SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
- SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
- SJA1105S (Gen. 2, SGMII, TT-Ethernet)

8
drivers/net/dsa/sja1105/Makefile Normal file
View File

@ -0,0 +1,8 @@
obj-$(CONFIG_NET_DSA_SJA1105) += sja1105.o
sja1105-objs := \
sja1105_spi.o \
sja1105_main.o \
sja1105_clocking.o \
sja1105_static_config.o \
sja1105_dynamic_config.o \

138
drivers/net/dsa/sja1105/sja1105.h Normal file
View File

@ -0,0 +1,138 @@
/* SPDX-License-Identifier: GPL-2.0
* Copyright (c) 2018, Sensor-Technik Wiedemann GmbH
* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
*/
#ifndef _SJA1105_H
#define _SJA1105_H
#include <linux/dsa/sja1105.h>
#include <net/dsa.h>
#include "sja1105_static_config.h"
#define SJA1105_NUM_PORTS 5
#define SJA1105_NUM_TC 8
#define SJA1105ET_FDB_BIN_SIZE 4
/* Keeps the different addresses between E/T and P/Q/R/S */
struct sja1105_regs {
u64 device_id;
u64 prod_id;
u64 status;
u64 rgu;
u64 config;
u64 rmii_pll1;
u64 pad_mii_tx[SJA1105_NUM_PORTS];
u64 cgu_idiv[SJA1105_NUM_PORTS];
u64 rgmii_pad_mii_tx[SJA1105_NUM_PORTS];
u64 mii_tx_clk[SJA1105_NUM_PORTS];
u64 mii_rx_clk[SJA1105_NUM_PORTS];
u64 mii_ext_tx_clk[SJA1105_NUM_PORTS];
u64 mii_ext_rx_clk[SJA1105_NUM_PORTS];
u64 rgmii_tx_clk[SJA1105_NUM_PORTS];
u64 rmii_ref_clk[SJA1105_NUM_PORTS];
u64 rmii_ext_tx_clk[SJA1105_NUM_PORTS];
u64 mac[SJA1105_NUM_PORTS];
u64 mac_hl1[SJA1105_NUM_PORTS];
u64 mac_hl2[SJA1105_NUM_PORTS];
u64 qlevel[SJA1105_NUM_PORTS];
};
struct sja1105_info {
u64 device_id;
/* Needed for distinction between P and R, and between Q and S
* (since the parts with/without SGMII share the same
* switch core and device_id)
*/
u64 part_no;
const struct sja1105_dynamic_table_ops *dyn_ops;
const struct sja1105_table_ops *static_ops;
const struct sja1105_regs *regs;
int (*reset_cmd)(const void *ctx, const void *data);
const char *name;
};
struct sja1105_private {
struct sja1105_static_config static_config;
const struct sja1105_info *info;
struct gpio_desc *reset_gpio;
struct spi_device *spidev;
struct dsa_switch *ds;
};
#include "sja1105_dynamic_config.h"
struct sja1105_spi_message {
u64 access;
u64 read_count;
u64 address;
};
typedef enum {
SPI_READ = 0,
SPI_WRITE = 1,
} sja1105_spi_rw_mode_t;
/* From sja1105_spi.c */
int sja1105_spi_send_packed_buf(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 reg_addr,
void *packed_buf, size_t size_bytes);
int sja1105_spi_send_int(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 reg_addr,
u64 *value, u64 size_bytes);
int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 base_addr,
void *packed_buf, u64 buf_len);
int sja1105_static_config_upload(struct sja1105_private *priv);
extern struct sja1105_info sja1105e_info;
extern struct sja1105_info sja1105t_info;
extern struct sja1105_info sja1105p_info;
extern struct sja1105_info sja1105q_info;
extern struct sja1105_info sja1105r_info;
extern struct sja1105_info sja1105s_info;
/* From sja1105_clocking.c */
typedef enum {
XMII_MAC = 0,
XMII_PHY = 1,
} sja1105_mii_role_t;
typedef enum {
XMII_MODE_MII = 0,
XMII_MODE_RMII = 1,
XMII_MODE_RGMII = 2,
} sja1105_phy_interface_t;
typedef enum {
SJA1105_SPEED_10MBPS = 3,
SJA1105_SPEED_100MBPS = 2,
SJA1105_SPEED_1000MBPS = 1,
SJA1105_SPEED_AUTO = 0,
} sja1105_speed_t;
int sja1105_clocking_setup_port(struct sja1105_private *priv, int port);
int sja1105_clocking_setup(struct sja1105_private *priv);
/* From sja1105_dynamic_config.c */
int sja1105_dynamic_config_read(struct sja1105_private *priv,
enum sja1105_blk_idx blk_idx,
int index, void *entry);
int sja1105_dynamic_config_write(struct sja1105_private *priv,
enum sja1105_blk_idx blk_idx,
int index, void *entry, bool keep);
/* Common implementations for the static and dynamic configs */
size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr,
enum packing_op op);
size_t sja1105pqrs_l2_lookup_entry_packing(void *buf, void *entry_ptr,
enum packing_op op);
size_t sja1105et_l2_lookup_entry_packing(void *buf, void *entry_ptr,
enum packing_op op);
size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr,
enum packing_op op);
size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr,
enum packing_op op);
#endif

598
drivers/net/dsa/sja1105/sja1105_clocking.c Normal file
View File

@ -0,0 +1,598 @@
// SPDX-License-Identifier: BSD-3-Clause
/* Copyright (c) 2016-2018, NXP Semiconductors
* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
*/
#include <linux/packing.h>
#include "sja1105.h"
#define SJA1105_SIZE_CGU_CMD 4
struct sja1105_cfg_pad_mii_tx {
u64 d32_os;
u64 d32_ipud;
u64 d10_os;
u64 d10_ipud;
u64 ctrl_os;
u64 ctrl_ipud;
u64 clk_os;
u64 clk_ih;
u64 clk_ipud;
};
/* UM10944 Table 82.
* IDIV_0_C to IDIV_4_C control registers
* (addr. 10000Bh to 10000Fh)
*/
struct sja1105_cgu_idiv {
u64 clksrc;
u64 autoblock;
u64 idiv;
u64 pd;
};
/* PLL_1_C control register
*
* SJA1105 E/T: UM10944 Table 81 (address 10000Ah)
* SJA1105 P/Q/R/S: UM11040 Table 116 (address 10000Ah)
*/
struct sja1105_cgu_pll_ctrl {
u64 pllclksrc;
u64 msel;
u64 autoblock;
u64 psel;
u64 direct;
u64 fbsel;
u64 bypass;
u64 pd;
};
enum {
CLKSRC_MII0_TX_CLK = 0x00,
CLKSRC_MII0_RX_CLK = 0x01,
CLKSRC_MII1_TX_CLK = 0x02,
CLKSRC_MII1_RX_CLK = 0x03,
CLKSRC_MII2_TX_CLK = 0x04,
CLKSRC_MII2_RX_CLK = 0x05,
CLKSRC_MII3_TX_CLK = 0x06,
CLKSRC_MII3_RX_CLK = 0x07,
CLKSRC_MII4_TX_CLK = 0x08,
CLKSRC_MII4_RX_CLK = 0x09,
CLKSRC_PLL0 = 0x0B,
CLKSRC_PLL1 = 0x0E,
CLKSRC_IDIV0 = 0x11,
CLKSRC_IDIV1 = 0x12,
CLKSRC_IDIV2 = 0x13,
CLKSRC_IDIV3 = 0x14,
CLKSRC_IDIV4 = 0x15,
};
/* UM10944 Table 83.
* MIIx clock control registers 1 to 30
* (addresses 100013h to 100035h)
*/
struct sja1105_cgu_mii_ctrl {
u64 clksrc;
u64 autoblock;
u64 pd;
};
static void sja1105_cgu_idiv_packing(void *buf, struct sja1105_cgu_idiv *idiv,
enum packing_op op)
{
const int size = 4;
sja1105_packing(buf, &idiv->clksrc, 28, 24, size, op);
sja1105_packing(buf, &idiv->autoblock, 11, 11, size, op);
sja1105_packing(buf, &idiv->idiv, 5, 2, size, op);
sja1105_packing(buf, &idiv->pd, 0, 0, size, op);
}
static int sja1105_cgu_idiv_config(struct sja1105_private *priv, int port,
bool enabled, int factor)
{
const struct sja1105_regs *regs = priv->info->regs;
struct device *dev = priv->ds->dev;
struct sja1105_cgu_idiv idiv;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
if (enabled && factor != 1 && factor != 10) {
dev_err(dev, "idiv factor must be 1 or 10\n");
return -ERANGE;
}
/* Payload for packed_buf */
idiv.clksrc = 0x0A; /* 25MHz */
idiv.autoblock = 1; /* Block clk automatically */
idiv.idiv = factor - 1; /* Divide by 1 or 10 */
idiv.pd = enabled ? 0 : 1; /* Power down? */
sja1105_cgu_idiv_packing(packed_buf, &idiv, PACK);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE,
regs->cgu_idiv[port], packed_buf,
SJA1105_SIZE_CGU_CMD);
}
static void
sja1105_cgu_mii_control_packing(void *buf, struct sja1105_cgu_mii_ctrl *cmd,
enum packing_op op)
{
const int size = 4;
sja1105_packing(buf, &cmd->clksrc, 28, 24, size, op);
sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op);
sja1105_packing(buf, &cmd->pd, 0, 0, size, op);
}
static int sja1105_cgu_mii_tx_clk_config(struct sja1105_private *priv,
int port, sja1105_mii_role_t role)
{
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl mii_tx_clk;
const int mac_clk_sources[] = {
CLKSRC_MII0_TX_CLK,
CLKSRC_MII1_TX_CLK,
CLKSRC_MII2_TX_CLK,
CLKSRC_MII3_TX_CLK,
CLKSRC_MII4_TX_CLK,
};
const int phy_clk_sources[] = {
CLKSRC_IDIV0,
CLKSRC_IDIV1,
CLKSRC_IDIV2,
CLKSRC_IDIV3,
CLKSRC_IDIV4,
};
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
int clksrc;
if (role == XMII_MAC)
clksrc = mac_clk_sources[port];
else
clksrc = phy_clk_sources[port];
/* Payload for packed_buf */
mii_tx_clk.clksrc = clksrc;
mii_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */
mii_tx_clk.pd = 0; /* Power Down off => enabled */
sja1105_cgu_mii_control_packing(packed_buf, &mii_tx_clk, PACK);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE,
regs->mii_tx_clk[port], packed_buf,
SJA1105_SIZE_CGU_CMD);
}
static int
sja1105_cgu_mii_rx_clk_config(struct sja1105_private *priv, int port)
{
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl mii_rx_clk;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
const int clk_sources[] = {
CLKSRC_MII0_RX_CLK,
CLKSRC_MII1_RX_CLK,
CLKSRC_MII2_RX_CLK,
CLKSRC_MII3_RX_CLK,
CLKSRC_MII4_RX_CLK,
};
/* Payload for packed_buf */
mii_rx_clk.clksrc = clk_sources[port];
mii_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */
mii_rx_clk.pd = 0; /* Power Down off => enabled */
sja1105_cgu_mii_control_packing(packed_buf, &mii_rx_clk, PACK);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE,
regs->mii_rx_clk[port], packed_buf,
SJA1105_SIZE_CGU_CMD);
}
static int
sja1105_cgu_mii_ext_tx_clk_config(struct sja1105_private *priv, int port)
{
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl mii_ext_tx_clk;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
const int clk_sources[] = {
CLKSRC_IDIV0,
CLKSRC_IDIV1,
CLKSRC_IDIV2,
CLKSRC_IDIV3,
CLKSRC_IDIV4,
};
/* Payload for packed_buf */
mii_ext_tx_clk.clksrc = clk_sources[port];
mii_ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */
mii_ext_tx_clk.pd = 0; /* Power Down off => enabled */
sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_tx_clk, PACK);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE,
regs->mii_ext_tx_clk[port],
packed_buf, SJA1105_SIZE_CGU_CMD);
}
static int
sja1105_cgu_mii_ext_rx_clk_config(struct sja1105_private *priv, int port)
{
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl mii_ext_rx_clk;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
const int clk_sources[] = {
CLKSRC_IDIV0,
CLKSRC_IDIV1,
CLKSRC_IDIV2,
CLKSRC_IDIV3,
CLKSRC_IDIV4,
};
/* Payload for packed_buf */
mii_ext_rx_clk.clksrc = clk_sources[port];
mii_ext_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */
mii_ext_rx_clk.pd = 0; /* Power Down off => enabled */
sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_rx_clk, PACK);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE,
regs->mii_ext_rx_clk[port],
packed_buf, SJA1105_SIZE_CGU_CMD);
}
static int sja1105_mii_clocking_setup(struct sja1105_private *priv, int port,
sja1105_mii_role_t role)
{
struct device *dev = priv->ds->dev;
int rc;
dev_dbg(dev, "Configuring MII-%s clocking\n",
(role == XMII_MAC) ? "MAC" : "PHY");
/* If role is MAC, disable IDIV
* If role is PHY, enable IDIV and configure for 1/1 divider
*/
rc = sja1105_cgu_idiv_config(priv, port, (role == XMII_PHY), 1);
if (rc < 0)
return rc;
/* Configure CLKSRC of MII_TX_CLK_n
* * If role is MAC, select TX_CLK_n
* * If role is PHY, select IDIV_n
*/
rc = sja1105_cgu_mii_tx_clk_config(priv, port, role);
if (rc < 0)
return rc;
/* Configure CLKSRC of MII_RX_CLK_n
* Select RX_CLK_n
*/
rc = sja1105_cgu_mii_rx_clk_config(priv, port);
if (rc < 0)
return rc;
if (role == XMII_PHY) {
/* Per MII spec, the PHY (which is us) drives the TX_CLK pin */
/* Configure CLKSRC of EXT_TX_CLK_n
* Select IDIV_n
*/
rc = sja1105_cgu_mii_ext_tx_clk_config(priv, port);
if (rc < 0)
return rc;
/* Configure CLKSRC of EXT_RX_CLK_n
* Select IDIV_n
*/
rc = sja1105_cgu_mii_ext_rx_clk_config(priv, port);
if (rc < 0)
return rc;
}
return 0;
}
static void
sja1105_cgu_pll_control_packing(void *buf, struct sja1105_cgu_pll_ctrl *cmd,
enum packing_op op)
{
const int size = 4;
sja1105_packing(buf, &cmd->pllclksrc, 28, 24, size, op);
sja1105_packing(buf, &cmd->msel, 23, 16, size, op);
sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op);
sja1105_packing(buf, &cmd->psel, 9, 8, size, op);
sja1105_packing(buf, &cmd->direct, 7, 7, size, op);
sja1105_packing(buf, &cmd->fbsel, 6, 6, size, op);
sja1105_packing(buf, &cmd->bypass, 1, 1, size, op);
sja1105_packing(buf, &cmd->pd, 0, 0, size, op);
}
static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv,
int port, sja1105_speed_t speed)
{
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl txc;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
int clksrc;
if (speed == SJA1105_SPEED_1000MBPS) {
clksrc = CLKSRC_PLL0;
} else {
int clk_sources[] = {CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2,
CLKSRC_IDIV3, CLKSRC_IDIV4};
clksrc = clk_sources[port];
}
/* RGMII: 125MHz for 1000, 25MHz for 100, 2.5MHz for 10 */
txc.clksrc = clksrc;
/* Autoblock clk while changing clksrc */
txc.autoblock = 1;
/* Power Down off => enabled */
txc.pd = 0;
sja1105_cgu_mii_control_packing(packed_buf, &txc, PACK);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE,
regs->rgmii_tx_clk[port],
packed_buf, SJA1105_SIZE_CGU_CMD);
}
/* AGU */
static void
sja1105_cfg_pad_mii_tx_packing(void *buf, struct sja1105_cfg_pad_mii_tx *cmd,
enum packing_op op)
{
const int size = 4;
sja1105_packing(buf, &cmd->d32_os, 28, 27, size, op);
sja1105_packing(buf, &cmd->d32_ipud, 25, 24, size, op);
sja1105_packing(buf, &cmd->d10_os, 20, 19, size, op);
sja1105_packing(buf, &cmd->d10_ipud, 17, 16, size, op);
sja1105_packing(buf, &cmd->ctrl_os, 12, 11, size, op);
sja1105_packing(buf, &cmd->ctrl_ipud, 9, 8, size, op);
sja1105_packing(buf, &cmd->clk_os, 4, 3, size, op);
sja1105_packing(buf, &cmd->clk_ih, 2, 2, size, op);
sja1105_packing(buf, &cmd->clk_ipud, 1, 0, size, op);
}
static int sja1105_rgmii_cfg_pad_tx_config(struct sja1105_private *priv,
int port)
{
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cfg_pad_mii_tx pad_mii_tx;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
/* Payload */
pad_mii_tx.d32_os = 3; /* TXD[3:2] output stage: */
/* high noise/high speed */
pad_mii_tx.d10_os = 3; /* TXD[1:0] output stage: */
/* high noise/high speed */
pad_mii_tx.d32_ipud = 2; /* TXD[3:2] input stage: */
/* plain input (default) */
pad_mii_tx.d10_ipud = 2; /* TXD[1:0] input stage: */
/* plain input (default) */
pad_mii_tx.ctrl_os = 3; /* TX_CTL / TX_ER output stage */
pad_mii_tx.ctrl_ipud = 2; /* TX_CTL / TX_ER input stage (default) */
pad_mii_tx.clk_os = 3; /* TX_CLK output stage */
pad_mii_tx.clk_ih = 0; /* TX_CLK input hysteresis (default) */
pad_mii_tx.clk_ipud = 2; /* TX_CLK input stage (default) */
sja1105_cfg_pad_mii_tx_packing(packed_buf, &pad_mii_tx, PACK);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE,
regs->rgmii_pad_mii_tx[port],
packed_buf, SJA1105_SIZE_CGU_CMD);
}
static int sja1105_rgmii_clocking_setup(struct sja1105_private *priv, int port)
{
struct device *dev = priv->ds->dev;
struct sja1105_mac_config_entry *mac;
sja1105_speed_t speed;
int rc;
mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
speed = mac[port].speed;
dev_dbg(dev, "Configuring port %d RGMII at speed %dMbps\n",
port, speed);
switch (speed) {
case SJA1105_SPEED_1000MBPS:
/* 1000Mbps, IDIV disabled (125 MHz) */
rc = sja1105_cgu_idiv_config(priv, port, false, 1);
break;
case SJA1105_SPEED_100MBPS:
/* 100Mbps, IDIV enabled, divide by 1 (25 MHz) */
rc = sja1105_cgu_idiv_config(priv, port, true, 1);
break;
case SJA1105_SPEED_10MBPS:
/* 10Mbps, IDIV enabled, divide by 10 (2.5 MHz) */
rc = sja1105_cgu_idiv_config(priv, port, true, 10);
break;
case SJA1105_SPEED_AUTO:
/* Skip CGU configuration if there is no speed available
* (e.g. link is not established yet)
*/
dev_dbg(dev, "Speed not available, skipping CGU config\n");
return 0;
default:
rc = -EINVAL;
}
if (rc < 0) {
dev_err(dev, "Failed to configure idiv\n");
return rc;
}
rc = sja1105_cgu_rgmii_tx_clk_config(priv, port, speed);
if (rc < 0) {
dev_err(dev, "Failed to configure RGMII Tx clock\n");
return rc;
}
rc = sja1105_rgmii_cfg_pad_tx_config(priv, port);
if (rc < 0) {
dev_err(dev, "Failed to configure Tx pad registers\n");
return rc;
}
return 0;
}
static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv,
int port)
{
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl ref_clk;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
const int clk_sources[] = {
CLKSRC_MII0_TX_CLK,
CLKSRC_MII1_TX_CLK,
CLKSRC_MII2_TX_CLK,
CLKSRC_MII3_TX_CLK,
CLKSRC_MII4_TX_CLK,
};
/* Payload for packed_buf */
ref_clk.clksrc = clk_sources[port];
ref_clk.autoblock = 1; /* Autoblock clk while changing clksrc */
ref_clk.pd = 0; /* Power Down off => enabled */
sja1105_cgu_mii_control_packing(packed_buf, &ref_clk, PACK);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE,
regs->rmii_ref_clk[port],
packed_buf, SJA1105_SIZE_CGU_CMD);
}
static int
sja1105_cgu_rmii_ext_tx_clk_config(struct sja1105_private *priv, int port)
{
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl ext_tx_clk;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
/* Payload for packed_buf */
ext_tx_clk.clksrc = CLKSRC_PLL1;
ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */
ext_tx_clk.pd = 0; /* Power Down off => enabled */
sja1105_cgu_mii_control_packing(packed_buf, &ext_tx_clk, PACK);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE,
regs->rmii_ext_tx_clk[port],
packed_buf, SJA1105_SIZE_CGU_CMD);
}
static int sja1105_cgu_rmii_pll_config(struct sja1105_private *priv)
{
const struct sja1105_regs *regs = priv->info->regs;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
struct sja1105_cgu_pll_ctrl pll = {0};
struct device *dev = priv->ds->dev;
int rc;
/* PLL1 must be enabled and output 50 Mhz.
* This is done by writing first 0x0A010941 to
* the PLL_1_C register and then deasserting
* power down (PD) 0x0A010940.
*/
/* Step 1: PLL1 setup for 50Mhz */
pll.pllclksrc = 0xA;
pll.msel = 0x1;
pll.autoblock = 0x1;
pll.psel = 0x1;
pll.direct = 0x0;
pll.fbsel = 0x1;
pll.bypass = 0x0;
pll.pd = 0x1;
sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK);
rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rmii_pll1,
packed_buf, SJA1105_SIZE_CGU_CMD);
if (rc < 0) {
dev_err(dev, "failed to configure PLL1 for 50MHz\n");
return rc;
}
/* Step 2: Enable PLL1 */
pll.pd = 0x0;
sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK);
rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rmii_pll1,
packed_buf, SJA1105_SIZE_CGU_CMD);
if (rc < 0) {
dev_err(dev, "failed to enable PLL1\n");
return rc;
}
return rc;
}
static int sja1105_rmii_clocking_setup(struct sja1105_private *priv, int port,
sja1105_mii_role_t role)
{
struct device *dev = priv->ds->dev;
int rc;
dev_dbg(dev, "Configuring RMII-%s clocking\n",
(role == XMII_MAC) ? "MAC" : "PHY");
/* AH1601.pdf chapter 2.5.1. Sources */
if (role == XMII_MAC) {
/* Configure and enable PLL1 for 50Mhz output */
rc = sja1105_cgu_rmii_pll_config(priv);
if (rc < 0)
return rc;
}
/* Disable IDIV for this port */
rc = sja1105_cgu_idiv_config(priv, port, false, 1);
if (rc < 0)
return rc;
/* Source to sink mappings */
rc = sja1105_cgu_rmii_ref_clk_config(priv, port);
if (rc < 0)
return rc;
if (role == XMII_MAC) {
rc = sja1105_cgu_rmii_ext_tx_clk_config(priv, port);
if (rc < 0)
return rc;
}
return 0;
}
int sja1105_clocking_setup_port(struct sja1105_private *priv, int port)
{
struct sja1105_xmii_params_entry *mii;
struct device *dev = priv->ds->dev;
sja1105_phy_interface_t phy_mode;
sja1105_mii_role_t role;
int rc;
mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries;
/* RGMII etc */
phy_mode = mii->xmii_mode[port];
/* MAC or PHY, for applicable types (not RGMII) */
role = mii->phy_mac[port];
switch (phy_mode) {
case XMII_MODE_MII:
rc = sja1105_mii_clocking_setup(priv, port, role);
break;
case XMII_MODE_RMII:
rc = sja1105_rmii_clocking_setup(priv, port, role);
break;
case XMII_MODE_RGMII:
rc = sja1105_rgmii_clocking_setup(priv, port);
break;
default:
dev_err(dev, "Invalid interface mode specified: %d\n",
phy_mode);
return -EINVAL;
}
if (rc)
dev_err(dev, "Clocking setup for port %d failed: %d\n",
port, rc);
return rc;
}
int sja1105_clocking_setup(struct sja1105_private *priv)
{
int port, rc;
for (port = 0; port < SJA1105_NUM_PORTS; port++) {
rc = sja1105_clocking_setup_port(priv, port);
if (rc < 0)
return rc;
}
return 0;
}

489
drivers/net/dsa/sja1105/sja1105_dynamic_config.c Normal file
View File

@ -0,0 +1,489 @@
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
*/
#include "sja1105.h"
#define SJA1105_SIZE_DYN_CMD 4
#define SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY \
SJA1105_SIZE_DYN_CMD
#define SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD \
(SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_L2_LOOKUP_ENTRY)
#define SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD \
(SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY)
#define SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD \
(SJA1105_SIZE_DYN_CMD + 4 + SJA1105_SIZE_VLAN_LOOKUP_ENTRY)
#define SJA1105_SIZE_L2_FORWARDING_DYN_CMD \
(SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_L2_FORWARDING_ENTRY)
#define SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD \
(SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY)
#define SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD \
(SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY)
#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD \
SJA1105_SIZE_DYN_CMD
#define SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD \
SJA1105_SIZE_DYN_CMD
#define SJA1105_MAX_DYN_CMD_SIZE \
SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD
static void
sja1105pqrs_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
{
u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY;
const int size = SJA1105_SIZE_DYN_CMD;
sja1105_packing(p, &cmd->valid, 31, 31, size, op);
sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op);
sja1105_packing(p, &cmd->errors, 29, 29, size, op);
sja1105_packing(p, &cmd->valident, 27, 27, size, op);
/* Hack - The hardware takes the 'index' field within
* struct sja1105_l2_lookup_entry as the index on which this command
* will operate. However it will ignore everything else, so 'index'
* is logically part of command but physically part of entry.
* Populate the 'index' entry field from within the command callback,
* such that our API doesn't need to ask for a full-blown entry
* structure when e.g. a delete is requested.
*/
sja1105_packing(buf, &cmd->index, 29, 20,
SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, op);
/* TODO hostcmd */
}
static void
sja1105et_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
{
u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY;
const int size = SJA1105_SIZE_DYN_CMD;
sja1105_packing(p, &cmd->valid, 31, 31, size, op);
sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op);
sja1105_packing(p, &cmd->errors, 29, 29, size, op);
sja1105_packing(p, &cmd->valident, 27, 27, size, op);
/* Hack - see comments above. */
sja1105_packing(buf, &cmd->index, 29, 20,
SJA1105ET_SIZE_L2_LOOKUP_ENTRY, op);
}
static void
sja1105et_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
{
u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY;
u64 mgmtroute = 1;
sja1105et_l2_lookup_cmd_packing(buf, cmd, op);
if (op == PACK)
sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD);
}
static size_t sja1105et_mgmt_route_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
struct sja1105_mgmt_entry *entry = entry_ptr;
const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY;
/* UM10944: To specify if a PTP egress timestamp shall be captured on
* each port upon transmission of the frame, the LSB of VLANID in the
* ENTRY field provided by the host must be set.
* Bit 1 of VLANID then specifies the register where the timestamp for
* this port is stored in.
*/
sja1105_packing(buf, &entry->tsreg, 85, 85, size, op);
sja1105_packing(buf, &entry->takets, 84, 84, size, op);
sja1105_packing(buf, &entry->macaddr, 83, 36, size, op);
sja1105_packing(buf, &entry->destports, 35, 31, size, op);
sja1105_packing(buf, &entry->enfport, 30, 30, size, op);
return size;
}
/* In E/T, entry is at addresses 0x27-0x28. There is a 4 byte gap at 0x29,
* and command is at 0x2a. Similarly in P/Q/R/S there is a 1 register gap
* between entry (0x2d, 0x2e) and command (0x30).
*/
static void
sja1105_vlan_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
{
u8 *p = buf + SJA1105_SIZE_VLAN_LOOKUP_ENTRY + 4;
const int size = SJA1105_SIZE_DYN_CMD;
sja1105_packing(p, &cmd->valid, 31, 31, size, op);
sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op);
sja1105_packing(p, &cmd->valident, 27, 27, size, op);
/* Hack - see comments above, applied for 'vlanid' field of
* struct sja1105_vlan_lookup_entry.
*/
sja1105_packing(buf, &cmd->index, 38, 27,
SJA1105_SIZE_VLAN_LOOKUP_ENTRY, op);
}
static void
sja1105_l2_forwarding_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
{
u8 *p = buf + SJA1105_SIZE_L2_FORWARDING_ENTRY;
const int size = SJA1105_SIZE_DYN_CMD;
sja1105_packing(p, &cmd->valid, 31, 31, size, op);
sja1105_packing(p, &cmd->errors, 30, 30, size, op);
sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op);
sja1105_packing(p, &cmd->index, 4, 0, size, op);
}
static void
sja1105et_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
{
const int size = SJA1105_SIZE_DYN_CMD;
/* Yup, user manual definitions are reversed */
u8 *reg1 = buf + 4;
sja1105_packing(reg1, &cmd->valid, 31, 31, size, op);
sja1105_packing(reg1, &cmd->index, 26, 24, size, op);
}
static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY;
struct sja1105_mac_config_entry *entry = entry_ptr;
/* Yup, user manual definitions are reversed */
u8 *reg1 = buf + 4;
u8 *reg2 = buf;
sja1105_packing(reg1, &entry->speed, 30, 29, size, op);
sja1105_packing(reg1, &entry->drpdtag, 23, 23, size, op);
sja1105_packing(reg1, &entry->drpuntag, 22, 22, size, op);
sja1105_packing(reg1, &entry->retag, 21, 21, size, op);
sja1105_packing(reg1, &entry->dyn_learn, 20, 20, size, op);
sja1105_packing(reg1, &entry->egress, 19, 19, size, op);
sja1105_packing(reg1, &entry->ingress, 18, 18, size, op);
sja1105_packing(reg1, &entry->ing_mirr, 17, 17, size, op);
sja1105_packing(reg1, &entry->egr_mirr, 16, 16, size, op);
sja1105_packing(reg1, &entry->vlanprio, 14, 12, size, op);
sja1105_packing(reg1, &entry->vlanid, 11, 0, size, op);
sja1105_packing(reg2, &entry->tp_delin, 31, 16, size, op);
sja1105_packing(reg2, &entry->tp_delout, 15, 0, size, op);
/* MAC configuration table entries which can't be reconfigured:
* top, base, enabled, ifg, maxage, drpnona664
*/
/* Bogus return value, not used anywhere */
return 0;
}
static void
sja1105pqrs_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
{
const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY;
u8 *p = buf + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY;
sja1105_packing(p, &cmd->valid, 31, 31, size, op);
sja1105_packing(p, &cmd->errors, 30, 30, size, op);
sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op);
sja1105_packing(p, &cmd->index, 2, 0, size, op);
}
static void
sja1105et_l2_lookup_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
{
sja1105_packing(buf, &cmd->valid, 31, 31,
SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op);
}
static size_t
sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
struct sja1105_l2_lookup_params_entry *entry = entry_ptr;
sja1105_packing(buf, &entry->poly, 7, 0,
SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op);
/* Bogus return value, not used anywhere */
return 0;
}
static void
sja1105et_general_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
{
const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD;
sja1105_packing(buf, &cmd->valid, 31, 31, size, op);
sja1105_packing(buf, &cmd->errors, 30, 30, size, op);
}
static size_t
sja1105et_general_params_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
struct sja1105_general_params_entry *entry = entry_ptr;
const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD;
sja1105_packing(buf, &entry->mirr_port, 2, 0, size, op);
/* Bogus return value, not used anywhere */
return 0;
}
#define OP_READ BIT(0)
#define OP_WRITE BIT(1)
#define OP_DEL BIT(2)
/* SJA1105E/T: First generation */
struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = {
[BLK_IDX_L2_LOOKUP] = {
.entry_packing = sja1105et_l2_lookup_entry_packing,
.cmd_packing = sja1105et_l2_lookup_cmd_packing,
.access = (OP_READ | OP_WRITE | OP_DEL),
.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
.packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD,
.addr = 0x20,
},
[BLK_IDX_MGMT_ROUTE] = {
.entry_packing = sja1105et_mgmt_route_entry_packing,
.cmd_packing = sja1105et_mgmt_route_cmd_packing,
.access = (OP_READ | OP_WRITE),
.max_entry_count = SJA1105_NUM_PORTS,
.packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD,
.addr = 0x20,
},
[BLK_IDX_L2_POLICING] = {0},
[BLK_IDX_VLAN_LOOKUP] = {
.entry_packing = sja1105_vlan_lookup_entry_packing,
.cmd_packing = sja1105_vlan_lookup_cmd_packing,
.access = (OP_WRITE | OP_DEL),
.max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT,
.packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD,
.addr = 0x27,
},
[BLK_IDX_L2_FORWARDING] = {
.entry_packing = sja1105_l2_forwarding_entry_packing,
.cmd_packing = sja1105_l2_forwarding_cmd_packing,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT,
.access = OP_WRITE,
.packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD,
.addr = 0x24,
},
[BLK_IDX_MAC_CONFIG] = {
.entry_packing = sja1105et_mac_config_entry_packing,
.cmd_packing = sja1105et_mac_config_cmd_packing,
.max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT,
.access = OP_WRITE,
.packed_size = SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD,
.addr = 0x36,
},
[BLK_IDX_L2_LOOKUP_PARAMS] = {
.entry_packing = sja1105et_l2_lookup_params_entry_packing,
.cmd_packing = sja1105et_l2_lookup_params_cmd_packing,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
.access = OP_WRITE,
.packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD,
.addr = 0x38,
},
[BLK_IDX_L2_FORWARDING_PARAMS] = {0},
[BLK_IDX_GENERAL_PARAMS] = {
.entry_packing = sja1105et_general_params_entry_packing,
.cmd_packing = sja1105et_general_params_cmd_packing,
.max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT,
.access = OP_WRITE,
.packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD,
.addr = 0x34,
},
[BLK_IDX_XMII_PARAMS] = {0},
};
/* SJA1105P/Q/R/S: Second generation: TODO */
struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = {
[BLK_IDX_L2_LOOKUP] = {
.entry_packing = sja1105pqrs_l2_lookup_entry_packing,
.cmd_packing = sja1105pqrs_l2_lookup_cmd_packing,
.access = (OP_READ | OP_WRITE | OP_DEL),
.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
.packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD,
.addr = 0x24,
},
[BLK_IDX_L2_POLICING] = {0},
[BLK_IDX_VLAN_LOOKUP] = {
.entry_packing = sja1105_vlan_lookup_entry_packing,
.cmd_packing = sja1105_vlan_lookup_cmd_packing,
.access = (OP_READ | OP_WRITE | OP_DEL),
.max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT,
.packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD,
.addr = 0x2D,
},
[BLK_IDX_L2_FORWARDING] = {
.entry_packing = sja1105_l2_forwarding_entry_packing,
.cmd_packing = sja1105_l2_forwarding_cmd_packing,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT,
.access = OP_WRITE,
.packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD,
.addr = 0x2A,
},
[BLK_IDX_MAC_CONFIG] = {
.entry_packing = sja1105pqrs_mac_config_entry_packing,
.cmd_packing = sja1105pqrs_mac_config_cmd_packing,
.max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT,
.access = (OP_READ | OP_WRITE),
.packed_size = SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD,
.addr = 0x4B,
},
[BLK_IDX_L2_LOOKUP_PARAMS] = {
.entry_packing = sja1105et_l2_lookup_params_entry_packing,
.cmd_packing = sja1105et_l2_lookup_params_cmd_packing,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
.access = (OP_READ | OP_WRITE),
.packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD,
.addr = 0x38,
},
[BLK_IDX_L2_FORWARDING_PARAMS] = {0},
[BLK_IDX_GENERAL_PARAMS] = {
.entry_packing = sja1105et_general_params_entry_packing,
.cmd_packing = sja1105et_general_params_cmd_packing,
.max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT,
.access = OP_WRITE,
.packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD,
.addr = 0x34,
},
[BLK_IDX_XMII_PARAMS] = {0},
};
int sja1105_dynamic_config_read(struct sja1105_private *priv,
enum sja1105_blk_idx blk_idx,
int index, void *entry)
{
const struct sja1105_dynamic_table_ops *ops;
struct sja1105_dyn_cmd cmd = {0};
/* SPI payload buffer */
u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0};
int retries = 3;
int rc;
if (blk_idx >= BLK_IDX_MAX_DYN)
return -ERANGE;
ops = &priv->info->dyn_ops[blk_idx];
if (index >= ops->max_entry_count)
return -ERANGE;
if (!(ops->access & OP_READ))
return -EOPNOTSUPP;
if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE)
return -ERANGE;
if (!ops->cmd_packing)
return -EOPNOTSUPP;
if (!ops->entry_packing)
return -EOPNOTSUPP;
cmd.valid = true; /* Trigger action on table entry */
cmd.rdwrset = SPI_READ; /* Action is read */
cmd.index = index;
ops->cmd_packing(packed_buf, &cmd, PACK);
/* Send SPI write operation: read config table entry */
rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, ops->addr,
packed_buf, ops->packed_size);
if (rc < 0)
return rc;
/* Loop until we have confirmation that hardware has finished
* processing the command and has cleared the VALID field
*/
do {
memset(packed_buf, 0, ops->packed_size);
/* Retrieve the read operation's result */
rc = sja1105_spi_send_packed_buf(priv, SPI_READ, ops->addr,
packed_buf, ops->packed_size);
if (rc < 0)
return rc;
cmd = (struct sja1105_dyn_cmd) {0};
ops->cmd_packing(packed_buf, &cmd, UNPACK);
/* UM10944: [valident] will always be found cleared
* during a read access with MGMTROUTE set.
* So don't error out in that case.
*/
if (!cmd.valident && blk_idx != BLK_IDX_MGMT_ROUTE)
return -EINVAL;
cpu_relax();
} while (cmd.valid && --retries);
if (cmd.valid)
return -ETIMEDOUT;
/* Don't dereference possibly NULL pointer - maybe caller
* only wanted to see whether the entry existed or not.
*/
if (entry)
ops->entry_packing(packed_buf, entry, UNPACK);
return 0;
}
int sja1105_dynamic_config_write(struct sja1105_private *priv,
enum sja1105_blk_idx blk_idx,
int index, void *entry, bool keep)
{
const struct sja1105_dynamic_table_ops *ops;
struct sja1105_dyn_cmd cmd = {0};
/* SPI payload buffer */
u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0};
int rc;
if (blk_idx >= BLK_IDX_MAX_DYN)
return -ERANGE;
ops = &priv->info->dyn_ops[blk_idx];
if (index >= ops->max_entry_count)
return -ERANGE;
if (!(ops->access & OP_WRITE))
return -EOPNOTSUPP;
if (!keep && !(ops->access & OP_DEL))
return -EOPNOTSUPP;
if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE)
return -ERANGE;
cmd.valident = keep; /* If false, deletes entry */
cmd.valid = true; /* Trigger action on table entry */
cmd.rdwrset = SPI_WRITE; /* Action is write */
cmd.index = index;
if (!ops->cmd_packing)
return -EOPNOTSUPP;
ops->cmd_packing(packed_buf, &cmd, PACK);
if (!ops->entry_packing)
return -EOPNOTSUPP;
/* Don't dereference potentially NULL pointer if just
* deleting a table entry is what was requested. For cases
* where 'index' field is physically part of entry structure,
* and needed here, we deal with that in the cmd_packing callback.
*/
if (keep)
ops->entry_packing(packed_buf, entry, PACK);
/* Send SPI write operation: read config table entry */
rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, ops->addr,
packed_buf, ops->packed_size);
if (rc < 0)
return rc;
cmd = (struct sja1105_dyn_cmd) {0};
ops->cmd_packing(packed_buf, &cmd, UNPACK);
if (cmd.errors)
return -EINVAL;
return 0;
}

43
drivers/net/dsa/sja1105/sja1105_dynamic_config.h Normal file
View File

@ -0,0 +1,43 @@
/* SPDX-License-Identifier: GPL-2.0
* Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com>
*/
#ifndef _SJA1105_DYNAMIC_CONFIG_H
#define _SJA1105_DYNAMIC_CONFIG_H
#include "sja1105.h"
#include <linux/packing.h>
struct sja1105_dyn_cmd {
u64 valid;
u64 rdwrset;
u64 errors;
u64 valident;
u64 index;
};
struct sja1105_dynamic_table_ops {
/* This returns size_t just to keep same prototype as the
* static config ops, of which we are reusing some functions.
*/
size_t (*entry_packing)(void *buf, void *entry_ptr, enum packing_op op);
void (*cmd_packing)(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op);
size_t max_entry_count;
size_t packed_size;
u64 addr;
u8 access;
};
struct sja1105_mgmt_entry {
u64 tsreg;
u64 takets;
u64 macaddr;
u64 destports;
u64 enfport;
u64 index;
};
extern struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN];
extern struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN];
#endif

928
drivers/net/dsa/sja1105/sja1105_main.c Normal file
View File

@ -0,0 +1,928 @@
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2018, Sensor-Technik Wiedemann GmbH
* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/printk.h>
#include <linux/spi/spi.h>
#include <linux/errno.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/of_mdio.h>
#include <linux/of_device.h>
#include <linux/netdev_features.h>
#include <linux/netdevice.h>
#include <linux/if_bridge.h>
#include <linux/if_ether.h>
#include "sja1105.h"
static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len,
unsigned int startup_delay)
{
gpiod_set_value_cansleep(gpio, 1);
/* Wait for minimum reset pulse length */
msleep(pulse_len);
gpiod_set_value_cansleep(gpio, 0);
/* Wait until chip is ready after reset */
msleep(startup_delay);
}
static void
sja1105_port_allow_traffic(struct sja1105_l2_forwarding_entry *l2_fwd,
int from, int to, bool allow)
{
if (allow) {
l2_fwd[from].bc_domain |= BIT(to);
l2_fwd[from].reach_port |= BIT(to);
l2_fwd[from].fl_domain |= BIT(to);
} else {
l2_fwd[from].bc_domain &= ~BIT(to);
l2_fwd[from].reach_port &= ~BIT(to);
l2_fwd[from].fl_domain &= ~BIT(to);
}
}
/* Structure used to temporarily transport device tree
* settings into sja1105_setup
*/
struct sja1105_dt_port {
phy_interface_t phy_mode;
sja1105_mii_role_t role;
};
static int sja1105_init_mac_settings(struct sja1105_private *priv)
{
struct sja1105_mac_config_entry default_mac = {
/* Enable all 8 priority queues on egress.
* Every queue i holds top[i] - base[i] frames.
* Sum of top[i] - base[i] is 511 (max hardware limit).
*/
.top = {0x3F, 0x7F, 0xBF, 0xFF, 0x13F, 0x17F, 0x1BF, 0x1FF},
.base = {0x0, 0x40, 0x80, 0xC0, 0x100, 0x140, 0x180, 0x1C0},
.enabled = {true, true, true, true, true, true, true, true},
/* Keep standard IFG of 12 bytes on egress. */
.ifg = 0,
/* Always put the MAC speed in automatic mode, where it can be
* retrieved from the PHY object through phylib and
* sja1105_adjust_port_config.
*/
.speed = SJA1105_SPEED_AUTO,
/* No static correction for 1-step 1588 events */
.tp_delin = 0,
.tp_delout = 0,
/* Disable aging for critical TTEthernet traffic */
.maxage = 0xFF,
/* Internal VLAN (pvid) to apply to untagged ingress */
.vlanprio = 0,
.vlanid = 0,
.ing_mirr = false,
.egr_mirr = false,
/* Don't drop traffic with other EtherType than ETH_P_IP */
.drpnona664 = false,
/* Don't drop double-tagged traffic */
.drpdtag = false,
/* Don't drop untagged traffic */
.drpuntag = false,
/* Don't retag 802.1p (VID 0) traffic with the pvid */
.retag = false,
/* Enable learning and I/O on user ports by default. */
.dyn_learn = true,
.egress = false,
.ingress = false,
};
struct sja1105_mac_config_entry *mac;
struct sja1105_table *table;
int i;
table = &priv->static_config.tables[BLK_IDX_MAC_CONFIG];
/* Discard previous MAC Configuration Table */
if (table->entry_count) {
kfree(table->entries);
table->entry_count = 0;
}
table->entries = kcalloc(SJA1105_NUM_PORTS,
table->ops->unpacked_entry_size, GFP_KERNEL);
if (!table->entries)
return -ENOMEM;
/* Override table based on phylib DT bindings */
table->entry_count = SJA1105_NUM_PORTS;
mac = table->entries;
for (i = 0; i < SJA1105_NUM_PORTS; i++)
mac[i] = default_mac;
return 0;
}
static int sja1105_init_mii_settings(struct sja1105_private *priv,
struct sja1105_dt_port *ports)
{
struct device *dev = &priv->spidev->dev;
struct sja1105_xmii_params_entry *mii;
struct sja1105_table *table;
int i;
table = &priv->static_config.tables[BLK_IDX_XMII_PARAMS];
/* Discard previous xMII Mode Parameters Table */
if (table->entry_count) {
kfree(table->entries);
table->entry_count = 0;
}
table->entries = kcalloc(SJA1105_MAX_XMII_PARAMS_COUNT,
table->ops->unpacked_entry_size, GFP_KERNEL);
if (!table->entries)
return -ENOMEM;
/* Override table based on phylib DT bindings */
table->entry_count = SJA1105_MAX_XMII_PARAMS_COUNT;
mii = table->entries;
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
switch (ports[i].phy_mode) {
case PHY_INTERFACE_MODE_MII:
mii->xmii_mode[i] = XMII_MODE_MII;
break;
case PHY_INTERFACE_MODE_RMII:
mii->xmii_mode[i] = XMII_MODE_RMII;
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
mii->xmii_mode[i] = XMII_MODE_RGMII;
break;
default:
dev_err(dev, "Unsupported PHY mode %s!\n",
phy_modes(ports[i].phy_mode));
}
mii->phy_mac[i] = ports[i].role;
}
return 0;
}
static int sja1105_init_static_fdb(struct sja1105_private *priv)
{
struct sja1105_table *table;
table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP];
if (table->entry_count) {
kfree(table->entries);
table->entry_count = 0;
}
return 0;
}
static int sja1105_init_l2_lookup_params(struct sja1105_private *priv)
{
struct sja1105_table *table;
struct sja1105_l2_lookup_params_entry default_l2_lookup_params = {
/* TODO Learned FDB entries are never forgotten */
.maxage = 0,
/* All entries within a FDB bin are available for learning */
.dyn_tbsz = SJA1105ET_FDB_BIN_SIZE,
/* 2^8 + 2^5 + 2^3 + 2^2 + 2^1 + 1 in Koopman notation */
.poly = 0x97,
/* This selects between Independent VLAN Learning (IVL) and
* Shared VLAN Learning (SVL)
*/
.shared_learn = false,
/* Don't discard management traffic based on ENFPORT -
* we don't perform SMAC port enforcement anyway, so
* what we are setting here doesn't matter.
*/
.no_enf_hostprt = false,
/* Don't learn SMAC for mac_fltres1 and mac_fltres0.
* Maybe correlate with no_linklocal_learn from bridge driver?
*/
.no_mgmt_learn = true,
};
table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS];
if (table->entry_count) {
kfree(table->entries);
table->entry_count = 0;
}
table->entries = kcalloc(SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
table->ops->unpacked_entry_size, GFP_KERNEL);
if (!table->entries)
return -ENOMEM;
table->entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT;
/* This table only has a single entry */
((struct sja1105_l2_lookup_params_entry *)table->entries)[0] =
default_l2_lookup_params;
return 0;
}
static int sja1105_init_static_vlan(struct sja1105_private *priv)
{
struct sja1105_table *table;
struct sja1105_vlan_lookup_entry pvid = {
.ving_mirr = 0,
.vegr_mirr = 0,
.vmemb_port = 0,
.vlan_bc = 0,
.tag_port = 0,
.vlanid = 0,
};
int i;
table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP];
/* The static VLAN table will only contain the initial pvid of 0.
*/
if (table->entry_count) {
kfree(table->entries);
table->entry_count = 0;
}
table->entries = kcalloc(1, table->ops->unpacked_entry_size,
GFP_KERNEL);
if (!table->entries)
return -ENOMEM;
table->entry_count = 1;
/* VLAN ID 0: all DT-defined ports are members; no restrictions on
* forwarding; always transmit priority-tagged frames as untagged.
*/
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
pvid.vmemb_port |= BIT(i);
pvid.vlan_bc |= BIT(i);
pvid.tag_port &= ~BIT(i);
}
((struct sja1105_vlan_lookup_entry *)table->entries)[0] = pvid;
return 0;
}
static int sja1105_init_l2_forwarding(struct sja1105_private *priv)
{
struct sja1105_l2_forwarding_entry *l2fwd;
struct sja1105_table *table;
int i, j;
table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING];
if (table->entry_count) {
kfree(table->entries);
table->entry_count = 0;
}
table->entries = kcalloc(SJA1105_MAX_L2_FORWARDING_COUNT,
table->ops->unpacked_entry_size, GFP_KERNEL);
if (!table->entries)
return -ENOMEM;
table->entry_count = SJA1105_MAX_L2_FORWARDING_COUNT;
l2fwd = table->entries;
/* First 5 entries define the forwarding rules */
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
unsigned int upstream = dsa_upstream_port(priv->ds, i);
for (j = 0; j < SJA1105_NUM_TC; j++)
l2fwd[i].vlan_pmap[j] = j;
if (i == upstream)
continue;
sja1105_port_allow_traffic(l2fwd, i, upstream, true);
sja1105_port_allow_traffic(l2fwd, upstream, i, true);
}
/* Next 8 entries define VLAN PCP mapping from ingress to egress.
* Create a one-to-one mapping.
*/
for (i = 0; i < SJA1105_NUM_TC; i++)
for (j = 0; j < SJA1105_NUM_PORTS; j++)
l2fwd[SJA1105_NUM_PORTS + i].vlan_pmap[j] = i;
return 0;
}
static int sja1105_init_l2_forwarding_params(struct sja1105_private *priv)
{
struct sja1105_l2_forwarding_params_entry default_l2fwd_params = {
/* Disallow dynamic reconfiguration of vlan_pmap */
.max_dynp = 0,
/* Use a single memory partition for all ingress queues */
.part_spc = { SJA1105_MAX_FRAME_MEMORY, 0, 0, 0, 0, 0, 0, 0 },
};
struct sja1105_table *table;
table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING_PARAMS];
if (table->entry_count) {
kfree(table->entries);
table->entry_count = 0;
}
table->entries = kcalloc(SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT,
table->ops->unpacked_entry_size, GFP_KERNEL);
if (!table->entries)
return -ENOMEM;
table->entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT;
/* This table only has a single entry */
((struct sja1105_l2_forwarding_params_entry *)table->entries)[0] =
default_l2fwd_params;
return 0;
}
static int sja1105_init_general_params(struct sja1105_private *priv)
{
struct sja1105_general_params_entry default_general_params = {
/* Disallow dynamic changing of the mirror port */
.mirr_ptacu = 0,
.switchid = priv->ds->index,
/* Priority queue for link-local frames trapped to CPU */
.hostprio = 0,
.mac_fltres1 = SJA1105_LINKLOCAL_FILTER_A,
.mac_flt1 = SJA1105_LINKLOCAL_FILTER_A_MASK,
.incl_srcpt1 = true,
.send_meta1 = false,
.mac_fltres0 = SJA1105_LINKLOCAL_FILTER_B,
.mac_flt0 = SJA1105_LINKLOCAL_FILTER_B_MASK,
.incl_srcpt0 = true,
.send_meta0 = false,
/* The destination for traffic matching mac_fltres1 and
* mac_fltres0 on all ports except host_port. Such traffic
* receieved on host_port itself would be dropped, except
* by installing a temporary 'management route'
*/
.host_port = dsa_upstream_port(priv->ds, 0),
/* Same as host port */
.mirr_port = dsa_upstream_port(priv->ds, 0),
/* Link-local traffic received on casc_port will be forwarded
* to host_port without embedding the source port and device ID
* info in the destination MAC address (presumably because it
* is a cascaded port and a downstream SJA switch already did
* that). Default to an invalid port (to disable the feature)
* and overwrite this if we find any DSA (cascaded) ports.
*/
.casc_port = SJA1105_NUM_PORTS,
/* No TTEthernet */
.vllupformat = 0,
.vlmarker = 0,
.vlmask = 0,
/* Only update correctionField for 1-step PTP (L2 transport) */
.ignore2stf = 0,
.tpid = ETH_P_8021Q,
.tpid2 = ETH_P_8021Q,
};
struct sja1105_table *table;
int i;
for (i = 0; i < SJA1105_NUM_PORTS; i++)
if (dsa_is_dsa_port(priv->ds, i))
default_general_params.casc_port = i;
table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS];
if (table->entry_count) {
kfree(table->entries);
table->entry_count = 0;
}
table->entries = kcalloc(SJA1105_MAX_GENERAL_PARAMS_COUNT,
table->ops->unpacked_entry_size, GFP_KERNEL);
if (!table->entries)
return -ENOMEM;
table->entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT;
/* This table only has a single entry */
((struct sja1105_general_params_entry *)table->entries)[0] =
default_general_params;
return 0;
}
#define SJA1105_RATE_MBPS(speed) (((speed) * 64000) / 1000)
static inline void
sja1105_setup_policer(struct sja1105_l2_policing_entry *policing,
int index)
{
policing[index].sharindx = index;
policing[index].smax = 65535; /* Burst size in bytes */
policing[index].rate = SJA1105_RATE_MBPS(1000);
policing[index].maxlen = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
policing[index].partition = 0;
}
static int sja1105_init_l2_policing(struct sja1105_private *priv)
{
struct sja1105_l2_policing_entry *policing;
struct sja1105_table *table;
int i, j, k;
table = &priv->static_config.tables[BLK_IDX_L2_POLICING];
/* Discard previous L2 Policing Table */
if (table->entry_count) {
kfree(table->entries);
table->entry_count = 0;
}
table->entries = kcalloc(SJA1105_MAX_L2_POLICING_COUNT,
table->ops->unpacked_entry_size, GFP_KERNEL);
if (!table->entries)
return -ENOMEM;
table->entry_count = SJA1105_MAX_L2_POLICING_COUNT;
policing = table->entries;
/* k sweeps through all unicast policers (0-39).
* bcast sweeps through policers 40-44.
*/
for (i = 0, k = 0; i < SJA1105_NUM_PORTS; i++) {
int bcast = (SJA1105_NUM_PORTS * SJA1105_NUM_TC) + i;
for (j = 0; j < SJA1105_NUM_TC; j++, k++)
sja1105_setup_policer(policing, k);
/* Set up this port's policer for broadcast traffic */
sja1105_setup_policer(policing, bcast);
}
return 0;
}
static int sja1105_static_config_load(struct sja1105_private *priv,
struct sja1105_dt_port *ports)
{
int rc;
sja1105_static_config_free(&priv->static_config);
rc = sja1105_static_config_init(&priv->static_config,
priv->info->static_ops,
priv->info->device_id);
if (rc)
return rc;
/* Build static configuration */
rc = sja1105_init_mac_settings(priv);
if (rc < 0)
return rc;
rc = sja1105_init_mii_settings(priv, ports);
if (rc < 0)
return rc;
rc = sja1105_init_static_fdb(priv);
if (rc < 0)
return rc;
rc = sja1105_init_static_vlan(priv);
if (rc < 0)
return rc;
rc = sja1105_init_l2_lookup_params(priv);
if (rc < 0)
return rc;
rc = sja1105_init_l2_forwarding(priv);
if (rc < 0)
return rc;
rc = sja1105_init_l2_forwarding_params(priv);
if (rc < 0)
return rc;
rc = sja1105_init_l2_policing(priv);
if (rc < 0)
return rc;
rc = sja1105_init_general_params(priv);
if (rc < 0)
return rc;
/* Send initial configuration to hardware via SPI */
return sja1105_static_config_upload(priv);
}
static int sja1105_parse_ports_node(struct sja1105_private *priv,
struct sja1105_dt_port *ports,
struct device_node *ports_node)
{
struct device *dev = &priv->spidev->dev;
struct device_node *child;
for_each_child_of_node(ports_node, child) {
struct device_node *phy_node;
int phy_mode;
u32 index;
/* Get switch port number from DT */
if (of_property_read_u32(child, "reg", &index) < 0) {
dev_err(dev, "Port number not defined in device tree "
"(property \"reg\")\n");
return -ENODEV;
}
/* Get PHY mode from DT */
phy_mode = of_get_phy_mode(child);
if (phy_mode < 0) {
dev_err(dev, "Failed to read phy-mode or "
"phy-interface-type property for port %d\n",
index);
return -ENODEV;
}
ports[index].phy_mode = phy_mode;
phy_node = of_parse_phandle(child, "phy-handle", 0);
if (!phy_node) {
if (!of_phy_is_fixed_link(child)) {
dev_err(dev, "phy-handle or fixed-link "
"properties missing!\n");
return -ENODEV;
}
/* phy-handle is missing, but fixed-link isn't.
* So it's a fixed link. Default to PHY role.
*/
ports[index].role = XMII_PHY;
} else {
/* phy-handle present => put port in MAC role */
ports[index].role = XMII_MAC;
of_node_put(phy_node);
}
/* The MAC/PHY role can be overridden with explicit bindings */
if (of_property_read_bool(child, "sja1105,role-mac"))
ports[index].role = XMII_MAC;
else if (of_property_read_bool(child, "sja1105,role-phy"))
ports[index].role = XMII_PHY;
}
return 0;
}
static int sja1105_parse_dt(struct sja1105_private *priv,
struct sja1105_dt_port *ports)
{
struct device *dev = &priv->spidev->dev;
struct device_node *switch_node = dev->of_node;
struct device_node *ports_node;
int rc;
ports_node = of_get_child_by_name(switch_node, "ports");
if (!ports_node) {
dev_err(dev, "Incorrect bindings: absent \"ports\" node\n");
return -ENODEV;
}
rc = sja1105_parse_ports_node(priv, ports, ports_node);
of_node_put(ports_node);
return rc;
}
/* Convert back and forth MAC speed from Mbps to SJA1105 encoding */
static int sja1105_speed[] = {
[SJA1105_SPEED_AUTO] = 0,
[SJA1105_SPEED_10MBPS] = 10,
[SJA1105_SPEED_100MBPS] = 100,
[SJA1105_SPEED_1000MBPS] = 1000,
};
static sja1105_speed_t sja1105_get_speed_cfg(unsigned int speed_mbps)
{
int i;
for (i = SJA1105_SPEED_AUTO; i <= SJA1105_SPEED_1000MBPS; i++)
if (sja1105_speed[i] == speed_mbps)
return i;
return -EINVAL;
}
/* Set link speed and enable/disable traffic I/O in the MAC configuration
* for a specific port.
*
* @speed_mbps: If 0, leave the speed unchanged, else adapt MAC to PHY speed.
* @enabled: Manage Rx and Tx settings for this port. Overrides the static
* configuration settings.
*/
static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
int speed_mbps, bool enabled)
{
struct sja1105_xmii_params_entry *mii;
struct sja1105_mac_config_entry *mac;
struct device *dev = priv->ds->dev;
sja1105_phy_interface_t phy_mode;
sja1105_speed_t speed;
int rc;
mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries;
mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries;
speed = sja1105_get_speed_cfg(speed_mbps);
if (speed_mbps && speed < 0) {
dev_err(dev, "Invalid speed %iMbps\n", speed_mbps);
return -EINVAL;
}
/* If requested, overwrite SJA1105_SPEED_AUTO from the static MAC
* configuration table, since this will be used for the clocking setup,
* and we no longer need to store it in the static config (already told
* hardware we want auto during upload phase).
*/
if (speed_mbps)
mac[port].speed = speed;
else
mac[port].speed = SJA1105_SPEED_AUTO;
/* On P/Q/R/S, one can read from the device via the MAC reconfiguration
* tables. On E/T, MAC reconfig tables are not readable, only writable.
* We have to *know* what the MAC looks like. For the sake of keeping
* the code common, we'll use the static configuration tables as a
* reasonable approximation for both E/T and P/Q/R/S.
*/
mac[port].ingress = enabled;
mac[port].egress = enabled;
/* Write to the dynamic reconfiguration tables */
rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG,
port, &mac[port], true);
if (rc < 0) {
dev_err(dev, "Failed to write MAC config: %d\n", rc);
return rc;
}
/* Reconfigure the PLLs for the RGMII interfaces (required 125 MHz at
* gigabit, 25 MHz at 100 Mbps and 2.5 MHz at 10 Mbps). For MII and
* RMII no change of the clock setup is required. Actually, changing
* the clock setup does interrupt the clock signal for a certain time
* which causes trouble for all PHYs relying on this signal.
*/
if (!enabled)
return 0;
phy_mode = mii->xmii_mode[port];
if (phy_mode != XMII_MODE_RGMII)
return 0;
return sja1105_clocking_setup_port(priv, port);
}
static void sja1105_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
struct sja1105_private *priv = ds->priv;
if (!phydev->link)
sja1105_adjust_port_config(priv, port, 0, false);
else
sja1105_adjust_port_config(priv, port, phydev->speed, true);
}
static int sja1105_bridge_member(struct dsa_switch *ds, int port,
struct net_device *br, bool member)
{
struct sja1105_l2_forwarding_entry *l2_fwd;
struct sja1105_private *priv = ds->priv;
int i, rc;
l2_fwd = priv->static_config.tables[BLK_IDX_L2_FORWARDING].entries;
for (i = 0; i < SJA1105_NUM_PORTS; i++) {
/* Add this port to the forwarding matrix of the
* other ports in the same bridge, and viceversa.
*/
if (!dsa_is_user_port(ds, i))
continue;
/* For the ports already under the bridge, only one thing needs
* to be done, and that is to add this port to their
* reachability domain. So we can perform the SPI write for
* them immediately. However, for this port itself (the one
* that is new to the bridge), we need to add all other ports
* to its reachability domain. So we do that incrementally in
* this loop, and perform the SPI write only at the end, once
* the domain contains all other bridge ports.
*/
if (i == port)
continue;
if (dsa_to_port(ds, i)->bridge_dev != br)
continue;
sja1105_port_allow_traffic(l2_fwd, i, port, member);
sja1105_port_allow_traffic(l2_fwd, port, i, member);
rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING,
i, &l2_fwd[i], true);
if (rc < 0)
return rc;
}
return sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING,
port, &l2_fwd[port], true);
}
static int sja1105_bridge_join(struct dsa_switch *ds, int port,
struct net_device *br)
{
return sja1105_bridge_member(ds, port, br, true);
}
static void sja1105_bridge_leave(struct dsa_switch *ds, int port,
struct net_device *br)
{
sja1105_bridge_member(ds, port, br, false);
}
static enum dsa_tag_protocol
sja1105_get_tag_protocol(struct dsa_switch *ds, int port)
{
return DSA_TAG_PROTO_NONE;
}
/* The programming model for the SJA1105 switch is "all-at-once" via static
* configuration tables. Some of these can be dynamically modified at runtime,
* but not the xMII mode parameters table.
* Furthermode, some PHYs may not have crystals for generating their clocks
* (e.g. RMII). Instead, their 50MHz clock is supplied via the SJA1105 port's
* ref_clk pin. So port clocking needs to be initialized early, before
* connecting to PHYs is attempted, otherwise they won't respond through MDIO.
* Setting correct PHY link speed does not matter now.
* But dsa_slave_phy_setup is called later than sja1105_setup, so the PHY
* bindings are not yet parsed by DSA core. We need to parse early so that we
* can populate the xMII mode parameters table.
*/
static int sja1105_setup(struct dsa_switch *ds)
{
struct sja1105_dt_port ports[SJA1105_NUM_PORTS];
struct sja1105_private *priv = ds->priv;
int rc;
rc = sja1105_parse_dt(priv, ports);
if (rc < 0) {
dev_err(ds->dev, "Failed to parse DT: %d\n", rc);
return rc;
}
/* Create and send configuration down to device */
rc = sja1105_static_config_load(priv, ports);
if (rc < 0) {
dev_err(ds->dev, "Failed to load static config: %d\n", rc);
return rc;
}
/* Configure the CGU (PHY link modes and speeds) */
rc = sja1105_clocking_setup(priv);
if (rc < 0) {
dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc);
return rc;
}
return 0;
}
static const struct dsa_switch_ops sja1105_switch_ops = {
.get_tag_protocol = sja1105_get_tag_protocol,
.setup = sja1105_setup,
.adjust_link = sja1105_adjust_link,
.port_bridge_join = sja1105_bridge_join,
.port_bridge_leave = sja1105_bridge_leave,
};
static int sja1105_check_device_id(struct sja1105_private *priv)
{
const struct sja1105_regs *regs = priv->info->regs;
u8 prod_id[SJA1105_SIZE_DEVICE_ID] = {0};
struct device *dev = &priv->spidev->dev;
u64 device_id;
u64 part_no;
int rc;
rc = sja1105_spi_send_int(priv, SPI_READ, regs->device_id,
&device_id, SJA1105_SIZE_DEVICE_ID);
if (rc < 0)
return rc;
if (device_id != priv->info->device_id) {
dev_err(dev, "Expected device ID 0x%llx but read 0x%llx\n",
priv->info->device_id, device_id);
return -ENODEV;
}
rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->prod_id,
prod_id, SJA1105_SIZE_DEVICE_ID);
if (rc < 0)
return rc;
sja1105_unpack(prod_id, &part_no, 19, 4, SJA1105_SIZE_DEVICE_ID);
if (part_no != priv->info->part_no) {
dev_err(dev, "Expected part number 0x%llx but read 0x%llx\n",
priv->info->part_no, part_no);
return -ENODEV;
}
return 0;
}
static int sja1105_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct sja1105_private *priv;
struct dsa_switch *ds;
int rc;
if (!dev->of_node) {
dev_err(dev, "No DTS bindings for SJA1105 driver\n");
return -EINVAL;
}
priv = devm_kzalloc(dev, sizeof(struct sja1105_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
/* Configure the optional reset pin and bring up switch */
priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(priv->reset_gpio))
dev_dbg(dev, "reset-gpios not defined, ignoring\n");
else
sja1105_hw_reset(priv->reset_gpio, 1, 1);
/* Populate our driver private structure (priv) based on
* the device tree node that was probed (spi)
*/
priv->spidev = spi;
spi_set_drvdata(spi, priv);
/* Configure the SPI bus */
spi->bits_per_word = 8;
rc = spi_setup(spi);
if (rc < 0) {
dev_err(dev, "Could not init SPI\n");
return rc;
}
priv->info = of_device_get_match_data(dev);
/* Detect hardware device */
rc = sja1105_check_device_id(priv);
if (rc < 0) {
dev_err(dev, "Device ID check failed: %d\n", rc);
return rc;
}
dev_info(dev, "Probed switch chip: %s\n", priv->info->name);
ds = dsa_switch_alloc(dev, SJA1105_NUM_PORTS);
if (!ds)
return -ENOMEM;
ds->ops = &sja1105_switch_ops;
ds->priv = priv;
priv->ds = ds;
return dsa_register_switch(priv->ds);
}
static int sja1105_remove(struct spi_device *spi)
{
struct sja1105_private *priv = spi_get_drvdata(spi);
dsa_unregister_switch(priv->ds);
sja1105_static_config_free(&priv->static_config);
return 0;
}
static const struct of_device_id sja1105_dt_ids[] = {
{ .compatible = "nxp,sja1105e", .data = &sja1105e_info },
{ .compatible = "nxp,sja1105t", .data = &sja1105t_info },
{ .compatible = "nxp,sja1105p", .data = &sja1105p_info },
{ .compatible = "nxp,sja1105q", .data = &sja1105q_info },
{ .compatible = "nxp,sja1105r", .data = &sja1105r_info },
{ .compatible = "nxp,sja1105s", .data = &sja1105s_info },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, sja1105_dt_ids);
static struct spi_driver sja1105_driver = {
.driver = {
.name = "sja1105",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(sja1105_dt_ids),
},
.probe = sja1105_probe,
.remove = sja1105_remove,
};
module_spi_driver(sja1105_driver);
MODULE_AUTHOR("Vladimir Oltean <olteanv@gmail.com>");
MODULE_AUTHOR("Georg Waibel <georg.waibel@sensor-technik.de>");
MODULE_DESCRIPTION("SJA1105 Driver");
MODULE_LICENSE("GPL v2");

553
drivers/net/dsa/sja1105/sja1105_spi.c Normal file
View File

@ -0,0 +1,553 @@
// SPDX-License-Identifier: BSD-3-Clause
/* Copyright (c) 2016-2018, NXP Semiconductors
* Copyright (c) 2018, Sensor-Technik Wiedemann GmbH
* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
*/
#include <linux/spi/spi.h>
#include <linux/packing.h>
#include "sja1105.h"
#define SJA1105_SIZE_RESET_CMD 4
#define SJA1105_SIZE_SPI_MSG_HEADER 4
#define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4)
#define SJA1105_SIZE_SPI_TRANSFER_MAX \
(SJA1105_SIZE_SPI_MSG_HEADER + SJA1105_SIZE_SPI_MSG_MAXLEN)
static int sja1105_spi_transfer(const struct sja1105_private *priv,
const void *tx, void *rx, int size)
{
struct spi_device *spi = priv->spidev;
struct spi_transfer transfer = {
.tx_buf = tx,
.rx_buf = rx,
.len = size,
};
struct spi_message msg;
int rc;
if (size > SJA1105_SIZE_SPI_TRANSFER_MAX) {
dev_err(&spi->dev, "SPI message (%d) longer than max of %d\n",
size, SJA1105_SIZE_SPI_TRANSFER_MAX);
return -EMSGSIZE;
}
spi_message_init(&msg);
spi_message_add_tail(&transfer, &msg);
rc = spi_sync(spi, &msg);
if (rc < 0) {
dev_err(&spi->dev, "SPI transfer failed: %d\n", rc);
return rc;
}
return rc;
}
static void
sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg)
{
const int size = SJA1105_SIZE_SPI_MSG_HEADER;
memset(buf, 0, size);
sja1105_pack(buf, &msg->access, 31, 31, size);
sja1105_pack(buf, &msg->read_count, 30, 25, size);
sja1105_pack(buf, &msg->address, 24, 4, size);
}
/* If @rw is:
* - SPI_WRITE: creates and sends an SPI write message at absolute
* address reg_addr, taking size_bytes from *packed_buf
* - SPI_READ: creates and sends an SPI read message from absolute
* address reg_addr, writing size_bytes into *packed_buf
*
* This function should only be called if it is priorly known that
* @size_bytes is smaller than SIZE_SPI_MSG_MAXLEN. Larger packed buffers
* are chunked in smaller pieces by sja1105_spi_send_long_packed_buf below.
*/
int sja1105_spi_send_packed_buf(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 reg_addr,
void *packed_buf, size_t size_bytes)
{
u8 tx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0};
u8 rx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0};
const int msg_len = size_bytes + SJA1105_SIZE_SPI_MSG_HEADER;
struct sja1105_spi_message msg = {0};
int rc;
if (msg_len > SJA1105_SIZE_SPI_TRANSFER_MAX)
return -ERANGE;
msg.access = rw;
msg.address = reg_addr;
if (rw == SPI_READ)
msg.read_count = size_bytes / 4;
sja1105_spi_message_pack(tx_buf, &msg);
if (rw == SPI_WRITE)
memcpy(tx_buf + SJA1105_SIZE_SPI_MSG_HEADER,
packed_buf, size_bytes);
rc = sja1105_spi_transfer(priv, tx_buf, rx_buf, msg_len);
if (rc < 0)
return rc;
if (rw == SPI_READ)
memcpy(packed_buf, rx_buf + SJA1105_SIZE_SPI_MSG_HEADER,
size_bytes);
return 0;
}
/* If @rw is:
* - SPI_WRITE: creates and sends an SPI write message at absolute
* address reg_addr, taking size_bytes from *packed_buf
* - SPI_READ: creates and sends an SPI read message from absolute
* address reg_addr, writing size_bytes into *packed_buf
*
* The u64 *value is unpacked, meaning that it's stored in the native
* CPU endianness and directly usable by software running on the core.
*
* This is a wrapper around sja1105_spi_send_packed_buf().
*/
int sja1105_spi_send_int(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 reg_addr,
u64 *value, u64 size_bytes)
{
u8 packed_buf[SJA1105_SIZE_SPI_MSG_MAXLEN];
int rc;
if (size_bytes > SJA1105_SIZE_SPI_MSG_MAXLEN)
return -ERANGE;
if (rw == SPI_WRITE)
sja1105_pack(packed_buf, value, 8 * size_bytes - 1, 0,
size_bytes);
rc = sja1105_spi_send_packed_buf(priv, rw, reg_addr, packed_buf,
size_bytes);
if (rw == SPI_READ)
sja1105_unpack(packed_buf, value, 8 * size_bytes - 1, 0,
size_bytes);
return rc;
}
/* Should be used if a @packed_buf larger than SJA1105_SIZE_SPI_MSG_MAXLEN
* must be sent/received. Splitting the buffer into chunks and assembling
* those into SPI messages is done automatically by this function.
*/
int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 base_addr,
void *packed_buf, u64 buf_len)
{
struct chunk {
void *buf_ptr;
int len;
u64 spi_address;
} chunk;
int distance_to_end;
int rc;
/* Initialize chunk */
chunk.buf_ptr = packed_buf;
chunk.spi_address = base_addr;
chunk.len = min_t(int, buf_len, SJA1105_SIZE_SPI_MSG_MAXLEN);
while (chunk.len) {
rc = sja1105_spi_send_packed_buf(priv, rw, chunk.spi_address,
chunk.buf_ptr, chunk.len);
if (rc < 0)
return rc;
chunk.buf_ptr += chunk.len;
chunk.spi_address += chunk.len / 4;
distance_to_end = (uintptr_t)(packed_buf + buf_len -
chunk.buf_ptr);
chunk.len = min(distance_to_end, SJA1105_SIZE_SPI_MSG_MAXLEN);
}
return 0;
}
/* Back-ported structure from UM11040 Table 112.
* Reset control register (addr. 100440h)
* In the SJA1105 E/T, only warm_rst and cold_rst are
* supported (exposed in UM10944 as rst_ctrl), but the bit
* offsets of warm_rst and cold_rst are actually reversed.
*/
struct sja1105_reset_cmd {
u64 switch_rst;
u64 cfg_rst;
u64 car_rst;
u64 otp_rst;
u64 warm_rst;
u64 cold_rst;
u64 por_rst;
};
static void
sja1105et_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset)
{
const int size = SJA1105_SIZE_RESET_CMD;
memset(buf, 0, size);
sja1105_pack(buf, &reset->cold_rst, 3, 3, size);
sja1105_pack(buf, &reset->warm_rst, 2, 2, size);
}
static void
sja1105pqrs_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset)
{
const int size = SJA1105_SIZE_RESET_CMD;
memset(buf, 0, size);
sja1105_pack(buf, &reset->switch_rst, 8, 8, size);
sja1105_pack(buf, &reset->cfg_rst, 7, 7, size);
sja1105_pack(buf, &reset->car_rst, 5, 5, size);
sja1105_pack(buf, &reset->otp_rst, 4, 4, size);
sja1105_pack(buf, &reset->warm_rst, 3, 3, size);
sja1105_pack(buf, &reset->cold_rst, 2, 2, size);
sja1105_pack(buf, &reset->por_rst, 1, 1, size);
}
static int sja1105et_reset_cmd(const void *ctx, const void *data)
{
const struct sja1105_private *priv = ctx;
const struct sja1105_reset_cmd *reset = data;
const struct sja1105_regs *regs = priv->info->regs;
struct device *dev = priv->ds->dev;
u8 packed_buf[SJA1105_SIZE_RESET_CMD];
if (reset->switch_rst ||
reset->cfg_rst ||
reset->car_rst ||
reset->otp_rst ||
reset->por_rst) {
dev_err(dev, "Only warm and cold reset is supported "
"for SJA1105 E/T!\n");
return -EINVAL;
}
if (reset->warm_rst)
dev_dbg(dev, "Warm reset requested\n");
if (reset->cold_rst)
dev_dbg(dev, "Cold reset requested\n");
sja1105et_reset_cmd_pack(packed_buf, reset);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu,
packed_buf, SJA1105_SIZE_RESET_CMD);
}
static int sja1105pqrs_reset_cmd(const void *ctx, const void *data)
{
const struct sja1105_private *priv = ctx;
const struct sja1105_reset_cmd *reset = data;
const struct sja1105_regs *regs = priv->info->regs;
struct device *dev = priv->ds->dev;
u8 packed_buf[SJA1105_SIZE_RESET_CMD];
if (reset->switch_rst)
dev_dbg(dev, "Main reset for all functional modules requested\n");
if (reset->cfg_rst)
dev_dbg(dev, "Chip configuration reset requested\n");
if (reset->car_rst)
dev_dbg(dev, "Clock and reset control logic reset requested\n");
if (reset->otp_rst)
dev_dbg(dev, "OTP read cycle for reading product "
"config settings requested\n");
if (reset->warm_rst)
dev_dbg(dev, "Warm reset requested\n");
if (reset->cold_rst)
dev_dbg(dev, "Cold reset requested\n");
if (reset->por_rst)
dev_dbg(dev, "Power-on reset requested\n");
sja1105pqrs_reset_cmd_pack(packed_buf, reset);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu,
packed_buf, SJA1105_SIZE_RESET_CMD);
}
static int sja1105_cold_reset(const struct sja1105_private *priv)
{
struct sja1105_reset_cmd reset = {0};
reset.cold_rst = 1;
return priv->info->reset_cmd(priv, &reset);
}
struct sja1105_status {
u64 configs;
u64 crcchkl;
u64 ids;
u64 crcchkg;
};
/* This is not reading the entire General Status area, which is also
* divergent between E/T and P/Q/R/S, but only the relevant bits for
* ensuring that the static config upload procedure was successful.
*/
static void sja1105_status_unpack(void *buf, struct sja1105_status *status)
{
/* So that addition translates to 4 bytes */
u32 *p = buf;
/* device_id is missing from the buffer, but we don't
* want to diverge from the manual definition of the
* register addresses, so we'll back off one step with
* the register pointer, and never access p[0].
*/
p--;
sja1105_unpack(p + 0x1, &status->configs, 31, 31, 4);
sja1105_unpack(p + 0x1, &status->crcchkl, 30, 30, 4);
sja1105_unpack(p + 0x1, &status->ids, 29, 29, 4);
sja1105_unpack(p + 0x1, &status->crcchkg, 28, 28, 4);
}
static int sja1105_status_get(struct sja1105_private *priv,
struct sja1105_status *status)
{
const struct sja1105_regs *regs = priv->info->regs;
u8 packed_buf[4];
int rc;
rc = sja1105_spi_send_packed_buf(priv, SPI_READ,
regs->status,
packed_buf, 4);
if (rc < 0)
return rc;
sja1105_status_unpack(packed_buf, status);
return 0;
}
/* Not const because unpacking priv->static_config into buffers and preparing
* for upload requires the recalculation of table CRCs and updating the
* structures with these.
*/
static int
static_config_buf_prepare_for_upload(struct sja1105_private *priv,
void *config_buf, int buf_len)
{
struct sja1105_static_config *config = &priv->static_config;
struct sja1105_table_header final_header;
sja1105_config_valid_t valid;
char *final_header_ptr;
int crc_len;
valid = sja1105_static_config_check_valid(config);
if (valid != SJA1105_CONFIG_OK) {
dev_err(&priv->spidev->dev,
sja1105_static_config_error_msg[valid]);
return -EINVAL;
}
/* Write Device ID and config tables to config_buf */
sja1105_static_config_pack(config_buf, config);
/* Recalculate CRC of the last header (right now 0xDEADBEEF).
* Don't include the CRC field itself.
*/
crc_len = buf_len - 4;
/* Read the whole table header */
final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER;
sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK);
/* Modify */
final_header.crc = sja1105_crc32(config_buf, crc_len);
/* Rewrite */
sja1105_table_header_packing(final_header_ptr, &final_header, PACK);
return 0;
}
#define RETRIES 10
int sja1105_static_config_upload(struct sja1105_private *priv)
{
struct sja1105_static_config *config = &priv->static_config;
const struct sja1105_regs *regs = priv->info->regs;
struct device *dev = &priv->spidev->dev;
struct sja1105_status status;
int rc, retries = RETRIES;
u8 *config_buf;
int buf_len;
buf_len = sja1105_static_config_get_length(config);
config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL);
if (!config_buf)
return -ENOMEM;
rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len);
if (rc < 0) {
dev_err(dev, "Invalid config, cannot upload\n");
return -EINVAL;
}
do {
/* Put the SJA1105 in programming mode */
rc = sja1105_cold_reset(priv);
if (rc < 0) {
dev_err(dev, "Failed to reset switch, retrying...\n");
continue;
}
/* Wait for the switch to come out of reset */
usleep_range(1000, 5000);
/* Upload the static config to the device */
rc = sja1105_spi_send_long_packed_buf(priv, SPI_WRITE,
regs->config,
config_buf, buf_len);
if (rc < 0) {
dev_err(dev, "Failed to upload config, retrying...\n");
continue;
}
/* Check that SJA1105 responded well to the config upload */
rc = sja1105_status_get(priv, &status);
if (rc < 0)
continue;
if (status.ids == 1) {
dev_err(dev, "Mismatch between hardware and static config "
"device id. Wrote 0x%llx, wants 0x%llx\n",
config->device_id, priv->info->device_id);
continue;
}
if (status.crcchkl == 1) {
dev_err(dev, "Switch reported invalid local CRC on "
"the uploaded config, retrying...\n");
continue;
}
if (status.crcchkg == 1) {
dev_err(dev, "Switch reported invalid global CRC on "
"the uploaded config, retrying...\n");
continue;
}
if (status.configs == 0) {
dev_err(dev, "Switch reported that configuration is "
"invalid, retrying...\n");
continue;
}
} while (--retries && (status.crcchkl == 1 || status.crcchkg == 1 ||
status.configs == 0 || status.ids == 1));
if (!retries) {
rc = -EIO;
dev_err(dev, "Failed to upload config to device, giving up\n");
goto out;
} else if (retries != RETRIES - 1) {
dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries);
}
dev_info(dev, "Reset switch and programmed static config\n");
out:
kfree(config_buf);
return rc;
}
struct sja1105_regs sja1105et_regs = {
.device_id = 0x0,
.prod_id = 0x100BC3,
.status = 0x1,
.config = 0x020000,
.rgu = 0x100440,
.pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
.rmii_pll1 = 0x10000A,
.cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
/* UM10944.pdf, Table 86, ACU Register overview */
.rgmii_pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
.mac = {0x200, 0x202, 0x204, 0x206, 0x208},
.mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440},
.mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640},
/* UM10944.pdf, Table 78, CGU Register overview */
.mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F},
.mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030},
.mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
.mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035},
.rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032},
.rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031},
.rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
};
struct sja1105_regs sja1105pqrs_regs = {
.device_id = 0x0,
.prod_id = 0x100BC3,
.status = 0x1,
.config = 0x020000,
.rgu = 0x100440,
.pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
.rmii_pll1 = 0x10000A,
.cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
/* UM10944.pdf, Table 86, ACU Register overview */
.rgmii_pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
.mac = {0x200, 0x202, 0x204, 0x206, 0x208},
.mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440},
.mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640},
/* UM11040.pdf, Table 114 */
.mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B},
.mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C},
.mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
.mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030},
.rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E},
.rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D},
.rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
.qlevel = {0x604, 0x614, 0x624, 0x634, 0x644},
};
struct sja1105_info sja1105e_info = {
.device_id = SJA1105E_DEVICE_ID,
.part_no = SJA1105ET_PART_NO,
.static_ops = sja1105e_table_ops,
.dyn_ops = sja1105et_dyn_ops,
.reset_cmd = sja1105et_reset_cmd,
.regs = &sja1105et_regs,
.name = "SJA1105E",
};
struct sja1105_info sja1105t_info = {
.device_id = SJA1105T_DEVICE_ID,
.part_no = SJA1105ET_PART_NO,
.static_ops = sja1105t_table_ops,
.dyn_ops = sja1105et_dyn_ops,
.reset_cmd = sja1105et_reset_cmd,
.regs = &sja1105et_regs,
.name = "SJA1105T",
};
struct sja1105_info sja1105p_info = {
.device_id = SJA1105PR_DEVICE_ID,
.part_no = SJA1105P_PART_NO,
.static_ops = sja1105p_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
.reset_cmd = sja1105pqrs_reset_cmd,
.regs = &sja1105pqrs_regs,
.name = "SJA1105P",
};
struct sja1105_info sja1105q_info = {
.device_id = SJA1105QS_DEVICE_ID,
.part_no = SJA1105Q_PART_NO,
.static_ops = sja1105q_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
.reset_cmd = sja1105pqrs_reset_cmd,
.regs = &sja1105pqrs_regs,
.name = "SJA1105Q",
};
struct sja1105_info sja1105r_info = {
.device_id = SJA1105PR_DEVICE_ID,
.part_no = SJA1105R_PART_NO,
.static_ops = sja1105r_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
.reset_cmd = sja1105pqrs_reset_cmd,
.regs = &sja1105pqrs_regs,
.name = "SJA1105R",
};
struct sja1105_info sja1105s_info = {
.device_id = SJA1105QS_DEVICE_ID,
.part_no = SJA1105S_PART_NO,
.static_ops = sja1105s_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
.regs = &sja1105pqrs_regs,
.reset_cmd = sja1105pqrs_reset_cmd,
.name = "SJA1105S",
};

949
drivers/net/dsa/sja1105/sja1105_static_config.c Normal file
View File

@ -0,0 +1,949 @@
// SPDX-License-Identifier: BSD-3-Clause
/* Copyright (c) 2016-2018, NXP Semiconductors
* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
*/
#include "sja1105_static_config.h"
#include <linux/crc32.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
/* Convenience wrappers over the generic packing functions. These take into
* account the SJA1105 memory layout quirks and provide some level of
* programmer protection against incorrect API use. The errors are not expected
* to occur durring runtime, therefore printing and swallowing them here is
* appropriate instead of clutterring up higher-level code.
*/
void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len)
{
int rc = packing(buf, (u64 *)val, start, end, len,
PACK, QUIRK_LSW32_IS_FIRST);
if (likely(!rc))
return;
if (rc == -EINVAL) {
pr_err("Start bit (%d) expected to be larger than end (%d)\n",
start, end);
} else if (rc == -ERANGE) {
if ((start - end + 1) > 64)
pr_err("Field %d-%d too large for 64 bits!\n",
start, end);
else
pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n",
*val, start, end);
}
dump_stack();
}
void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len)
{
int rc = packing((void *)buf, val, start, end, len,
UNPACK, QUIRK_LSW32_IS_FIRST);
if (likely(!rc))
return;
if (rc == -EINVAL)
pr_err("Start bit (%d) expected to be larger than end (%d)\n",
start, end);
else if (rc == -ERANGE)
pr_err("Field %d-%d too large for 64 bits!\n",
start, end);
dump_stack();
}
void sja1105_packing(void *buf, u64 *val, int start, int end,
size_t len, enum packing_op op)
{
int rc = packing(buf, val, start, end, len, op, QUIRK_LSW32_IS_FIRST);
if (likely(!rc))
return;
if (rc == -EINVAL) {
pr_err("Start bit (%d) expected to be larger than end (%d)\n",
start, end);
} else if (rc == -ERANGE) {
if ((start - end + 1) > 64)
pr_err("Field %d-%d too large for 64 bits!\n",
start, end);
else
pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n",
*val, start, end);
}
dump_stack();
}
/* Little-endian Ethernet CRC32 of data packed as big-endian u32 words */
u32 sja1105_crc32(const void *buf, size_t len)
{
unsigned int i;
u64 word;
u32 crc;
/* seed */
crc = ~0;
for (i = 0; i < len; i += 4) {
sja1105_unpack((void *)buf + i, &word, 31, 0, 4);
crc = crc32_le(crc, (u8 *)&word, 4);
}
return ~crc;
}
static size_t sja1105et_general_params_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY;
struct sja1105_general_params_entry *entry = entry_ptr;
sja1105_packing(buf, &entry->vllupformat, 319, 319, size, op);
sja1105_packing(buf, &entry->mirr_ptacu, 318, 318, size, op);
sja1105_packing(buf, &entry->switchid, 317, 315, size, op);
sja1105_packing(buf, &entry->hostprio, 314, 312, size, op);
sja1105_packing(buf, &entry->mac_fltres1, 311, 264, size, op);
sja1105_packing(buf, &entry->mac_fltres0, 263, 216, size, op);
sja1105_packing(buf, &entry->mac_flt1, 215, 168, size, op);
sja1105_packing(buf, &entry->mac_flt0, 167, 120, size, op);
sja1105_packing(buf, &entry->incl_srcpt1, 119, 119, size, op);
sja1105_packing(buf, &entry->incl_srcpt0, 118, 118, size, op);
sja1105_packing(buf, &entry->send_meta1, 117, 117, size, op);
sja1105_packing(buf, &entry->send_meta0, 116, 116, size, op);
sja1105_packing(buf, &entry->casc_port, 115, 113, size, op);
sja1105_packing(buf, &entry->host_port, 112, 110, size, op);
sja1105_packing(buf, &entry->mirr_port, 109, 107, size, op);
sja1105_packing(buf, &entry->vlmarker, 106, 75, size, op);
sja1105_packing(buf, &entry->vlmask, 74, 43, size, op);
sja1105_packing(buf, &entry->tpid, 42, 27, size, op);
sja1105_packing(buf, &entry->ignore2stf, 26, 26, size, op);
sja1105_packing(buf, &entry->tpid2, 25, 10, size, op);
return size;
}
static size_t
sja1105pqrs_general_params_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY;
struct sja1105_general_params_entry *entry = entry_ptr;
sja1105_packing(buf, &entry->vllupformat, 351, 351, size, op);
sja1105_packing(buf, &entry->mirr_ptacu, 350, 350, size, op);
sja1105_packing(buf, &entry->switchid, 349, 347, size, op);
sja1105_packing(buf, &entry->hostprio, 346, 344, size, op);
sja1105_packing(buf, &entry->mac_fltres1, 343, 296, size, op);
sja1105_packing(buf, &entry->mac_fltres0, 295, 248, size, op);
sja1105_packing(buf, &entry->mac_flt1, 247, 200, size, op);
sja1105_packing(buf, &entry->mac_flt0, 199, 152, size, op);
sja1105_packing(buf, &entry->incl_srcpt1, 151, 151, size, op);
sja1105_packing(buf, &entry->incl_srcpt0, 150, 150, size, op);
sja1105_packing(buf, &entry->send_meta1, 149, 149, size, op);
sja1105_packing(buf, &entry->send_meta0, 148, 148, size, op);
sja1105_packing(buf, &entry->casc_port, 147, 145, size, op);
sja1105_packing(buf, &entry->host_port, 144, 142, size, op);
sja1105_packing(buf, &entry->mirr_port, 141, 139, size, op);
sja1105_packing(buf, &entry->vlmarker, 138, 107, size, op);
sja1105_packing(buf, &entry->vlmask, 106, 75, size, op);
sja1105_packing(buf, &entry->tpid, 74, 59, size, op);
sja1105_packing(buf, &entry->ignore2stf, 58, 58, size, op);
sja1105_packing(buf, &entry->tpid2, 57, 42, size, op);
sja1105_packing(buf, &entry->queue_ts, 41, 41, size, op);
sja1105_packing(buf, &entry->egrmirrvid, 40, 29, size, op);
sja1105_packing(buf, &entry->egrmirrpcp, 28, 26, size, op);
sja1105_packing(buf, &entry->egrmirrdei, 25, 25, size, op);
sja1105_packing(buf, &entry->replay_port, 24, 22, size, op);
return size;
}
static size_t
sja1105_l2_forwarding_params_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY;
struct sja1105_l2_forwarding_params_entry *entry = entry_ptr;
int offset, i;
sja1105_packing(buf, &entry->max_dynp, 95, 93, size, op);
for (i = 0, offset = 13; i < 8; i++, offset += 10)
sja1105_packing(buf, &entry->part_spc[i],
offset + 9, offset + 0, size, op);
return size;
}
size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105_SIZE_L2_FORWARDING_ENTRY;
struct sja1105_l2_forwarding_entry *entry = entry_ptr;
int offset, i;
sja1105_packing(buf, &entry->bc_domain, 63, 59, size, op);
sja1105_packing(buf, &entry->reach_port, 58, 54, size, op);
sja1105_packing(buf, &entry->fl_domain, 53, 49, size, op);
for (i = 0, offset = 25; i < 8; i++, offset += 3)
sja1105_packing(buf, &entry->vlan_pmap[i],
offset + 2, offset + 0, size, op);
return size;
}
static size_t
sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY;
struct sja1105_l2_lookup_params_entry *entry = entry_ptr;
sja1105_packing(buf, &entry->maxage, 31, 17, size, op);
sja1105_packing(buf, &entry->dyn_tbsz, 16, 14, size, op);
sja1105_packing(buf, &entry->poly, 13, 6, size, op);
sja1105_packing(buf, &entry->shared_learn, 5, 5, size, op);
sja1105_packing(buf, &entry->no_enf_hostprt, 4, 4, size, op);
sja1105_packing(buf, &entry->no_mgmt_learn, 3, 3, size, op);
return size;
}
static size_t
sja1105pqrs_l2_lookup_params_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY;
struct sja1105_l2_lookup_params_entry *entry = entry_ptr;
sja1105_packing(buf, &entry->maxage, 57, 43, size, op);
sja1105_packing(buf, &entry->shared_learn, 27, 27, size, op);
sja1105_packing(buf, &entry->no_enf_hostprt, 26, 26, size, op);
sja1105_packing(buf, &entry->no_mgmt_learn, 25, 25, size, op);
return size;
}
size_t sja1105et_l2_lookup_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY;
struct sja1105_l2_lookup_entry *entry = entry_ptr;
sja1105_packing(buf, &entry->vlanid, 95, 84, size, op);
sja1105_packing(buf, &entry->macaddr, 83, 36, size, op);
sja1105_packing(buf, &entry->destports, 35, 31, size, op);
sja1105_packing(buf, &entry->enfport, 30, 30, size, op);
sja1105_packing(buf, &entry->index, 29, 20, size, op);
return size;
}
size_t sja1105pqrs_l2_lookup_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY;
struct sja1105_l2_lookup_entry *entry = entry_ptr;
/* These are static L2 lookup entries, so the structure
* should match UM11040 Table 16/17 definitions when
* LOCKEDS is 1.
*/
sja1105_packing(buf, &entry->vlanid, 81, 70, size, op);
sja1105_packing(buf, &entry->macaddr, 69, 22, size, op);
sja1105_packing(buf, &entry->destports, 21, 17, size, op);
sja1105_packing(buf, &entry->enfport, 16, 16, size, op);
sja1105_packing(buf, &entry->index, 15, 6, size, op);
return size;
}
static size_t sja1105_l2_policing_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105_SIZE_L2_POLICING_ENTRY;
struct sja1105_l2_policing_entry *entry = entry_ptr;
sja1105_packing(buf, &entry->sharindx, 63, 58, size, op);
sja1105_packing(buf, &entry->smax, 57, 42, size, op);
sja1105_packing(buf, &entry->rate, 41, 26, size, op);
sja1105_packing(buf, &entry->maxlen, 25, 15, size, op);
sja1105_packing(buf, &entry->partition, 14, 12, size, op);
return size;
}
static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY;
struct sja1105_mac_config_entry *entry = entry_ptr;
int offset, i;
for (i = 0, offset = 72; i < 8; i++, offset += 19) {
sja1105_packing(buf, &entry->enabled[i],
offset + 0, offset + 0, size, op);
sja1105_packing(buf, &entry->base[i],
offset + 9, offset + 1, size, op);
sja1105_packing(buf, &entry->top[i],
offset + 18, offset + 10, size, op);
}
sja1105_packing(buf, &entry->ifg, 71, 67, size, op);
sja1105_packing(buf, &entry->speed, 66, 65, size, op);
sja1105_packing(buf, &entry->tp_delin, 64, 49, size, op);
sja1105_packing(buf, &entry->tp_delout, 48, 33, size, op);
sja1105_packing(buf, &entry->maxage, 32, 25, size, op);
sja1105_packing(buf, &entry->vlanprio, 24, 22, size, op);
sja1105_packing(buf, &entry->vlanid, 21, 10, size, op);
sja1105_packing(buf, &entry->ing_mirr, 9, 9, size, op);
sja1105_packing(buf, &entry->egr_mirr, 8, 8, size, op);
sja1105_packing(buf, &entry->drpnona664, 7, 7, size, op);
sja1105_packing(buf, &entry->drpdtag, 6, 6, size, op);
sja1105_packing(buf, &entry->drpuntag, 5, 5, size, op);
sja1105_packing(buf, &entry->retag, 4, 4, size, op);
sja1105_packing(buf, &entry->dyn_learn, 3, 3, size, op);
sja1105_packing(buf, &entry->egress, 2, 2, size, op);
sja1105_packing(buf, &entry->ingress, 1, 1, size, op);
return size;
}
size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY;
struct sja1105_mac_config_entry *entry = entry_ptr;
int offset, i;
for (i = 0, offset = 104; i < 8; i++, offset += 19) {
sja1105_packing(buf, &entry->enabled[i],
offset + 0, offset + 0, size, op);
sja1105_packing(buf, &entry->base[i],
offset + 9, offset + 1, size, op);
sja1105_packing(buf, &entry->top[i],
offset + 18, offset + 10, size, op);
}
sja1105_packing(buf, &entry->ifg, 103, 99, size, op);
sja1105_packing(buf, &entry->speed, 98, 97, size, op);
sja1105_packing(buf, &entry->tp_delin, 96, 81, size, op);
sja1105_packing(buf, &entry->tp_delout, 80, 65, size, op);
sja1105_packing(buf, &entry->maxage, 64, 57, size, op);
sja1105_packing(buf, &entry->vlanprio, 56, 54, size, op);
sja1105_packing(buf, &entry->vlanid, 53, 42, size, op);
sja1105_packing(buf, &entry->ing_mirr, 41, 41, size, op);
sja1105_packing(buf, &entry->egr_mirr, 40, 40, size, op);
sja1105_packing(buf, &entry->drpnona664, 39, 39, size, op);
sja1105_packing(buf, &entry->drpdtag, 38, 38, size, op);
sja1105_packing(buf, &entry->drpuntag, 35, 35, size, op);
sja1105_packing(buf, &entry->retag, 34, 34, size, op);
sja1105_packing(buf, &entry->dyn_learn, 33, 33, size, op);
sja1105_packing(buf, &entry->egress, 32, 32, size, op);
sja1105_packing(buf, &entry->ingress, 31, 31, size, op);
return size;
}
size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY;
struct sja1105_vlan_lookup_entry *entry = entry_ptr;
sja1105_packing(buf, &entry->ving_mirr, 63, 59, size, op);
sja1105_packing(buf, &entry->vegr_mirr, 58, 54, size, op);
sja1105_packing(buf, &entry->vmemb_port, 53, 49, size, op);
sja1105_packing(buf, &entry->vlan_bc, 48, 44, size, op);
sja1105_packing(buf, &entry->tag_port, 43, 39, size, op);
sja1105_packing(buf, &entry->vlanid, 38, 27, size, op);
return size;
}
static size_t sja1105_xmii_params_entry_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105_SIZE_XMII_PARAMS_ENTRY;
struct sja1105_xmii_params_entry *entry = entry_ptr;
int offset, i;
for (i = 0, offset = 17; i < 5; i++, offset += 3) {
sja1105_packing(buf, &entry->xmii_mode[i],
offset + 1, offset + 0, size, op);
sja1105_packing(buf, &entry->phy_mac[i],
offset + 2, offset + 2, size, op);
}
return size;
}
size_t sja1105_table_header_packing(void *buf, void *entry_ptr,
enum packing_op op)
{
const size_t size = SJA1105_SIZE_TABLE_HEADER;
struct sja1105_table_header *entry = entry_ptr;
sja1105_packing(buf, &entry->block_id, 31, 24, size, op);
sja1105_packing(buf, &entry->len, 55, 32, size, op);
sja1105_packing(buf, &entry->crc, 95, 64, size, op);
return size;
}
/* WARNING: the *hdr pointer is really non-const, because it is
* modifying the CRC of the header for a 2-stage packing operation
*/
void
sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr)
{
/* First pack the table as-is, then calculate the CRC, and
* finally put the proper CRC into the packed buffer
*/
memset(buf, 0, SJA1105_SIZE_TABLE_HEADER);
sja1105_table_header_packing(buf, hdr, PACK);
hdr->crc = sja1105_crc32(buf, SJA1105_SIZE_TABLE_HEADER - 4);
sja1105_pack(buf + SJA1105_SIZE_TABLE_HEADER - 4, &hdr->crc, 31, 0, 4);
}
static void sja1105_table_write_crc(u8 *table_start, u8 *crc_ptr)
{
u64 computed_crc;
int len_bytes;
len_bytes = (uintptr_t)(crc_ptr - table_start);
computed_crc = sja1105_crc32(table_start, len_bytes);
sja1105_pack(crc_ptr, &computed_crc, 31, 0, 4);
}
/* The block IDs that the switches support are unfortunately sparse, so keep a
* mapping table to "block indices" and translate back and forth so that we
* don't waste useless memory in struct sja1105_static_config.
* Also, since the block id comes from essentially untrusted input (unpacking
* the static config from userspace) it has to be sanitized (range-checked)
* before blindly indexing kernel memory with the blk_idx.
*/
static u64 blk_id_map[BLK_IDX_MAX] = {
[BLK_IDX_L2_LOOKUP] = BLKID_L2_LOOKUP,
[BLK_IDX_L2_POLICING] = BLKID_L2_POLICING,
[BLK_IDX_VLAN_LOOKUP] = BLKID_VLAN_LOOKUP,
[BLK_IDX_L2_FORWARDING] = BLKID_L2_FORWARDING,
[BLK_IDX_MAC_CONFIG] = BLKID_MAC_CONFIG,
[BLK_IDX_L2_LOOKUP_PARAMS] = BLKID_L2_LOOKUP_PARAMS,
[BLK_IDX_L2_FORWARDING_PARAMS] = BLKID_L2_FORWARDING_PARAMS,
[BLK_IDX_GENERAL_PARAMS] = BLKID_GENERAL_PARAMS,
[BLK_IDX_XMII_PARAMS] = BLKID_XMII_PARAMS,
};
const char *sja1105_static_config_error_msg[] = {
[SJA1105_CONFIG_OK] = "",
[SJA1105_MISSING_L2_POLICING_TABLE] =
"l2-policing-table needs to have at least one entry",
[SJA1105_MISSING_L2_FORWARDING_TABLE] =
"l2-forwarding-table is either missing or incomplete",
[SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE] =
"l2-forwarding-parameters-table is missing",
[SJA1105_MISSING_GENERAL_PARAMS_TABLE] =
"general-parameters-table is missing",
[SJA1105_MISSING_VLAN_TABLE] =
"vlan-lookup-table needs to have at least the default untagged VLAN",
[SJA1105_MISSING_XMII_TABLE] =
"xmii-table is missing",
[SJA1105_MISSING_MAC_TABLE] =
"mac-configuration-table needs to contain an entry for each port",
[SJA1105_OVERCOMMITTED_FRAME_MEMORY] =
"Not allowed to overcommit frame memory. L2 memory partitions "
"and VL memory partitions share the same space. The sum of all "
"16 memory partitions is not allowed to be larger than 929 "
"128-byte blocks (or 910 with retagging). Please adjust "
"l2-forwarding-parameters-table.part_spc and/or "
"vl-forwarding-parameters-table.partspc.",
};
sja1105_config_valid_t
static_config_check_memory_size(const struct sja1105_table *tables)
{
const struct sja1105_l2_forwarding_params_entry *l2_fwd_params;
int i, mem = 0;
l2_fwd_params = tables[BLK_IDX_L2_FORWARDING_PARAMS].entries;
for (i = 0; i < 8; i++)
mem += l2_fwd_params->part_spc[i];
if (mem > SJA1105_MAX_FRAME_MEMORY)
return SJA1105_OVERCOMMITTED_FRAME_MEMORY;
return SJA1105_CONFIG_OK;
}
sja1105_config_valid_t
sja1105_static_config_check_valid(const struct sja1105_static_config *config)
{
const struct sja1105_table *tables = config->tables;
#define IS_FULL(blk_idx) \
(tables[blk_idx].entry_count == tables[blk_idx].ops->max_entry_count)
if (tables[BLK_IDX_L2_POLICING].entry_count == 0)
return SJA1105_MISSING_L2_POLICING_TABLE;
if (tables[BLK_IDX_VLAN_LOOKUP].entry_count == 0)
return SJA1105_MISSING_VLAN_TABLE;
if (!IS_FULL(BLK_IDX_L2_FORWARDING))
return SJA1105_MISSING_L2_FORWARDING_TABLE;
if (!IS_FULL(BLK_IDX_MAC_CONFIG))
return SJA1105_MISSING_MAC_TABLE;
if (!IS_FULL(BLK_IDX_L2_FORWARDING_PARAMS))
return SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE;
if (!IS_FULL(BLK_IDX_GENERAL_PARAMS))
return SJA1105_MISSING_GENERAL_PARAMS_TABLE;
if (!IS_FULL(BLK_IDX_XMII_PARAMS))
return SJA1105_MISSING_XMII_TABLE;
return static_config_check_memory_size(tables);
#undef IS_FULL
}
void
sja1105_static_config_pack(void *buf, struct sja1105_static_config *config)
{
struct sja1105_table_header header = {0};
enum sja1105_blk_idx i;
char *p = buf;
int j;
sja1105_pack(p, &config->device_id, 31, 0, 4);
p += SJA1105_SIZE_DEVICE_ID;
for (i = 0; i < BLK_IDX_MAX; i++) {
const struct sja1105_table *table;
char *table_start;
table = &config->tables[i];
if (!table->entry_count)
continue;
header.block_id = blk_id_map[i];
header.len = table->entry_count *
table->ops->packed_entry_size / 4;
sja1105_table_header_pack_with_crc(p, &header);
p += SJA1105_SIZE_TABLE_HEADER;
table_start = p;
for (j = 0; j < table->entry_count; j++) {
u8 *entry_ptr = table->entries;
entry_ptr += j * table->ops->unpacked_entry_size;
memset(p, 0, table->ops->packed_entry_size);
table->ops->packing(p, entry_ptr, PACK);
p += table->ops->packed_entry_size;
}
sja1105_table_write_crc(table_start, p);
p += 4;
}
/* Final header:
* Block ID does not matter
* Length of 0 marks that header is final
* CRC will be replaced on-the-fly on "config upload"
*/
header.block_id = 0;
header.len = 0;
header.crc = 0xDEADBEEF;
memset(p, 0, SJA1105_SIZE_TABLE_HEADER);
sja1105_table_header_packing(p, &header, PACK);
}
size_t
sja1105_static_config_get_length(const struct sja1105_static_config *config)
{
unsigned int sum;
unsigned int header_count;
enum sja1105_blk_idx i;
/* Ending header */
header_count = 1;
sum = SJA1105_SIZE_DEVICE_ID;
/* Tables (headers and entries) */
for (i = 0; i < BLK_IDX_MAX; i++) {
const struct sja1105_table *table;
table = &config->tables[i];
if (table->entry_count)
header_count++;
sum += table->ops->packed_entry_size * table->entry_count;
}
/* Headers have an additional CRC at the end */
sum += header_count * (SJA1105_SIZE_TABLE_HEADER + 4);
/* Last header does not have an extra CRC because there is no data */
sum -= 4;
return sum;
}
/* Compatibility matrices */
/* SJA1105E: First generation, no TTEthernet */
struct sja1105_table_ops sja1105e_table_ops[BLK_IDX_MAX] = {
[BLK_IDX_L2_LOOKUP] = {
.packing = sja1105et_l2_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry),
.packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
},
[BLK_IDX_L2_POLICING] = {
.packing = sja1105_l2_policing_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry),
.packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_POLICING_COUNT,
},
[BLK_IDX_VLAN_LOOKUP] = {
.packing = sja1105_vlan_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry),
.packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT,
},
[BLK_IDX_L2_FORWARDING] = {
.packing = sja1105_l2_forwarding_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT,
},
[BLK_IDX_MAC_CONFIG] = {
.packing = sja1105et_mac_config_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_mac_config_entry),
.packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY,
.max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT,
},
[BLK_IDX_L2_LOOKUP_PARAMS] = {
.packing = sja1105et_l2_lookup_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry),
.packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
},
[BLK_IDX_L2_FORWARDING_PARAMS] = {
.packing = sja1105_l2_forwarding_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT,
},
[BLK_IDX_GENERAL_PARAMS] = {
.packing = sja1105et_general_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_general_params_entry),
.packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT,
},
[BLK_IDX_XMII_PARAMS] = {
.packing = sja1105_xmii_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry),
.packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT,
},
};
/* SJA1105T: First generation, TTEthernet */
struct sja1105_table_ops sja1105t_table_ops[BLK_IDX_MAX] = {
[BLK_IDX_L2_LOOKUP] = {
.packing = sja1105et_l2_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry),
.packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
},
[BLK_IDX_L2_POLICING] = {
.packing = sja1105_l2_policing_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry),
.packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_POLICING_COUNT,
},
[BLK_IDX_VLAN_LOOKUP] = {
.packing = sja1105_vlan_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry),
.packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT,
},
[BLK_IDX_L2_FORWARDING] = {
.packing = sja1105_l2_forwarding_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT,
},
[BLK_IDX_MAC_CONFIG] = {
.packing = sja1105et_mac_config_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_mac_config_entry),
.packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY,
.max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT,
},
[BLK_IDX_L2_LOOKUP_PARAMS] = {
.packing = sja1105et_l2_lookup_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry),
.packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
},
[BLK_IDX_L2_FORWARDING_PARAMS] = {
.packing = sja1105_l2_forwarding_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT,
},
[BLK_IDX_GENERAL_PARAMS] = {
.packing = sja1105et_general_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_general_params_entry),
.packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT,
},
[BLK_IDX_XMII_PARAMS] = {
.packing = sja1105_xmii_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry),
.packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT,
},
};
/* SJA1105P: Second generation, no TTEthernet, no SGMII */
struct sja1105_table_ops sja1105p_table_ops[BLK_IDX_MAX] = {
[BLK_IDX_L2_LOOKUP] = {
.packing = sja1105pqrs_l2_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry),
.packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
},
[BLK_IDX_L2_POLICING] = {
.packing = sja1105_l2_policing_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry),
.packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_POLICING_COUNT,
},
[BLK_IDX_VLAN_LOOKUP] = {
.packing = sja1105_vlan_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry),
.packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT,
},
[BLK_IDX_L2_FORWARDING] = {
.packing = sja1105_l2_forwarding_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT,
},
[BLK_IDX_MAC_CONFIG] = {
.packing = sja1105pqrs_mac_config_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_mac_config_entry),
.packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY,
.max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT,
},
[BLK_IDX_L2_LOOKUP_PARAMS] = {
.packing = sja1105pqrs_l2_lookup_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry),
.packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
},
[BLK_IDX_L2_FORWARDING_PARAMS] = {
.packing = sja1105_l2_forwarding_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT,
},
[BLK_IDX_GENERAL_PARAMS] = {
.packing = sja1105pqrs_general_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_general_params_entry),
.packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT,
},
[BLK_IDX_XMII_PARAMS] = {
.packing = sja1105_xmii_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry),
.packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT,
},
};
/* SJA1105Q: Second generation, TTEthernet, no SGMII */
struct sja1105_table_ops sja1105q_table_ops[BLK_IDX_MAX] = {
[BLK_IDX_L2_LOOKUP] = {
.packing = sja1105pqrs_l2_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry),
.packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
},
[BLK_IDX_L2_POLICING] = {
.packing = sja1105_l2_policing_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry),
.packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_POLICING_COUNT,
},
[BLK_IDX_VLAN_LOOKUP] = {
.packing = sja1105_vlan_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry),
.packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT,
},
[BLK_IDX_L2_FORWARDING] = {
.packing = sja1105_l2_forwarding_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT,
},
[BLK_IDX_MAC_CONFIG] = {
.packing = sja1105pqrs_mac_config_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_mac_config_entry),
.packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY,
.max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT,
},
[BLK_IDX_L2_LOOKUP_PARAMS] = {
.packing = sja1105pqrs_l2_lookup_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry),
.packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
},
[BLK_IDX_L2_FORWARDING_PARAMS] = {
.packing = sja1105_l2_forwarding_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT,
},
[BLK_IDX_GENERAL_PARAMS] = {
.packing = sja1105pqrs_general_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_general_params_entry),
.packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT,
},
[BLK_IDX_XMII_PARAMS] = {
.packing = sja1105_xmii_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry),
.packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT,
},
};
/* SJA1105R: Second generation, no TTEthernet, SGMII */
struct sja1105_table_ops sja1105r_table_ops[BLK_IDX_MAX] = {
[BLK_IDX_L2_LOOKUP] = {
.packing = sja1105pqrs_l2_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry),
.packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
},
[BLK_IDX_L2_POLICING] = {
.packing = sja1105_l2_policing_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry),
.packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_POLICING_COUNT,
},
[BLK_IDX_VLAN_LOOKUP] = {
.packing = sja1105_vlan_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry),
.packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT,
},
[BLK_IDX_L2_FORWARDING] = {
.packing = sja1105_l2_forwarding_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT,
},
[BLK_IDX_MAC_CONFIG] = {
.packing = sja1105pqrs_mac_config_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_mac_config_entry),
.packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY,
.max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT,
},
[BLK_IDX_L2_LOOKUP_PARAMS] = {
.packing = sja1105pqrs_l2_lookup_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry),
.packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
},
[BLK_IDX_L2_FORWARDING_PARAMS] = {
.packing = sja1105_l2_forwarding_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT,
},
[BLK_IDX_GENERAL_PARAMS] = {
.packing = sja1105pqrs_general_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_general_params_entry),
.packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT,
},
[BLK_IDX_XMII_PARAMS] = {
.packing = sja1105_xmii_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry),
.packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT,
},
};
/* SJA1105S: Second generation, TTEthernet, SGMII */
struct sja1105_table_ops sja1105s_table_ops[BLK_IDX_MAX] = {
[BLK_IDX_L2_LOOKUP] = {
.packing = sja1105pqrs_l2_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry),
.packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
},
[BLK_IDX_L2_POLICING] = {
.packing = sja1105_l2_policing_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry),
.packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_POLICING_COUNT,
},
[BLK_IDX_VLAN_LOOKUP] = {
.packing = sja1105_vlan_lookup_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry),
.packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY,
.max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT,
},
[BLK_IDX_L2_FORWARDING] = {
.packing = sja1105_l2_forwarding_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT,
},
[BLK_IDX_MAC_CONFIG] = {
.packing = sja1105pqrs_mac_config_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_mac_config_entry),
.packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY,
.max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT,
},
[BLK_IDX_L2_LOOKUP_PARAMS] = {
.packing = sja1105pqrs_l2_lookup_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry),
.packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT,
},
[BLK_IDX_L2_FORWARDING_PARAMS] = {
.packing = sja1105_l2_forwarding_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry),
.packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT,
},
[BLK_IDX_GENERAL_PARAMS] = {
.packing = sja1105pqrs_general_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_general_params_entry),
.packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT,
},
[BLK_IDX_XMII_PARAMS] = {
.packing = sja1105_xmii_params_entry_packing,
.unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry),
.packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY,
.max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT,
},
};
int sja1105_static_config_init(struct sja1105_static_config *config,
const struct sja1105_table_ops *static_ops,
u64 device_id)
{
enum sja1105_blk_idx i;
*config = (struct sja1105_static_config) {0};
/* Transfer static_ops array from priv into per-table ops
* for handier access
*/
for (i = 0; i < BLK_IDX_MAX; i++)
config->tables[i].ops = &static_ops[i];
config->device_id = device_id;
return 0;
}
void sja1105_static_config_free(struct sja1105_static_config *config)
{
enum sja1105_blk_idx i;
for (i = 0; i < BLK_IDX_MAX; i++) {
if (config->tables[i].entry_count) {
kfree(config->tables[i].entries);
config->tables[i].entry_count = 0;
}
}
}

250
drivers/net/dsa/sja1105/sja1105_static_config.h Normal file
View File

@ -0,0 +1,250 @@
/* SPDX-License-Identifier: BSD-3-Clause
* Copyright (c) 2016-2018, NXP Semiconductors
* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
*/
#ifndef _SJA1105_STATIC_CONFIG_H
#define _SJA1105_STATIC_CONFIG_H
#include <linux/packing.h>
#include <linux/types.h>
#include <asm/types.h>
#define SJA1105_SIZE_DEVICE_ID 4
#define SJA1105_SIZE_TABLE_HEADER 12
#define SJA1105_SIZE_L2_POLICING_ENTRY 8
#define SJA1105_SIZE_VLAN_LOOKUP_ENTRY 8
#define SJA1105_SIZE_L2_FORWARDING_ENTRY 8
#define SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY 12
#define SJA1105_SIZE_XMII_PARAMS_ENTRY 4
#define SJA1105ET_SIZE_L2_LOOKUP_ENTRY 12
#define SJA1105ET_SIZE_MAC_CONFIG_ENTRY 28
#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY 4
#define SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY 40
#define SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY 20
#define SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY 32
#define SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY 16
#define SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY 44
/* UM10944.pdf Page 11, Table 2. Configuration Blocks */
enum {
BLKID_L2_LOOKUP = 0x05,
BLKID_L2_POLICING = 0x06,
BLKID_VLAN_LOOKUP = 0x07,
BLKID_L2_FORWARDING = 0x08,
BLKID_MAC_CONFIG = 0x09,
BLKID_L2_LOOKUP_PARAMS = 0x0D,
BLKID_L2_FORWARDING_PARAMS = 0x0E,
BLKID_GENERAL_PARAMS = 0x11,
BLKID_XMII_PARAMS = 0x4E,
};
enum sja1105_blk_idx {
BLK_IDX_L2_LOOKUP = 0,
BLK_IDX_L2_POLICING,
BLK_IDX_VLAN_LOOKUP,
BLK_IDX_L2_FORWARDING,
BLK_IDX_MAC_CONFIG,
BLK_IDX_L2_LOOKUP_PARAMS,
BLK_IDX_L2_FORWARDING_PARAMS,
BLK_IDX_GENERAL_PARAMS,
BLK_IDX_XMII_PARAMS,
BLK_IDX_MAX,
/* Fake block indices that are only valid for dynamic access */
BLK_IDX_MGMT_ROUTE,
BLK_IDX_MAX_DYN,
BLK_IDX_INVAL = -1,
};
#define SJA1105_MAX_L2_LOOKUP_COUNT 1024
#define SJA1105_MAX_L2_POLICING_COUNT 45
#define SJA1105_MAX_VLAN_LOOKUP_COUNT 4096
#define SJA1105_MAX_L2_FORWARDING_COUNT 13
#define SJA1105_MAX_MAC_CONFIG_COUNT 5
#define SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT 1
#define SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT 1
#define SJA1105_MAX_GENERAL_PARAMS_COUNT 1
#define SJA1105_MAX_XMII_PARAMS_COUNT 1
#define SJA1105_MAX_FRAME_MEMORY 929
#define SJA1105E_DEVICE_ID 0x9C00000Cull
#define SJA1105T_DEVICE_ID 0x9E00030Eull
#define SJA1105PR_DEVICE_ID 0xAF00030Eull
#define SJA1105QS_DEVICE_ID 0xAE00030Eull
#define SJA1105ET_PART_NO 0x9A83
#define SJA1105P_PART_NO 0x9A84
#define SJA1105Q_PART_NO 0x9A85
#define SJA1105R_PART_NO 0x9A86
#define SJA1105S_PART_NO 0x9A87
struct sja1105_general_params_entry {
u64 vllupformat;
u64 mirr_ptacu;
u64 switchid;
u64 hostprio;
u64 mac_fltres1;
u64 mac_fltres0;
u64 mac_flt1;
u64 mac_flt0;
u64 incl_srcpt1;
u64 incl_srcpt0;
u64 send_meta1;
u64 send_meta0;
u64 casc_port;
u64 host_port;
u64 mirr_port;
u64 vlmarker;
u64 vlmask;
u64 tpid;
u64 ignore2stf;
u64 tpid2;
/* P/Q/R/S only */
u64 queue_ts;
u64 egrmirrvid;
u64 egrmirrpcp;
u64 egrmirrdei;
u64 replay_port;
};
struct sja1105_vlan_lookup_entry {
u64 ving_mirr;
u64 vegr_mirr;
u64 vmemb_port;
u64 vlan_bc;
u64 tag_port;
u64 vlanid;
};
struct sja1105_l2_lookup_entry {
u64 vlanid;
u64 macaddr;
u64 destports;
u64 enfport;
u64 index;
};
struct sja1105_l2_lookup_params_entry {
u64 maxage; /* Shared */
u64 dyn_tbsz; /* E/T only */
u64 poly; /* E/T only */
u64 shared_learn; /* Shared */
u64 no_enf_hostprt; /* Shared */
u64 no_mgmt_learn; /* Shared */
};
struct sja1105_l2_forwarding_entry {
u64 bc_domain;
u64 reach_port;
u64 fl_domain;
u64 vlan_pmap[8];
};
struct sja1105_l2_forwarding_params_entry {
u64 max_dynp;
u64 part_spc[8];
};
struct sja1105_l2_policing_entry {
u64 sharindx;
u64 smax;
u64 rate;
u64 maxlen;
u64 partition;
};
struct sja1105_mac_config_entry {
u64 top[8];
u64 base[8];
u64 enabled[8];
u64 ifg;
u64 speed;
u64 tp_delin;
u64 tp_delout;
u64 maxage;
u64 vlanprio;
u64 vlanid;
u64 ing_mirr;
u64 egr_mirr;
u64 drpnona664;
u64 drpdtag;
u64 drpuntag;
u64 retag;
u64 dyn_learn;
u64 egress;
u64 ingress;
};
struct sja1105_xmii_params_entry {
u64 phy_mac[5];
u64 xmii_mode[5];
};
struct sja1105_table_header {
u64 block_id;
u64 len;
u64 crc;
};
struct sja1105_table_ops {
size_t (*packing)(void *buf, void *entry_ptr, enum packing_op op);
size_t unpacked_entry_size;
size_t packed_entry_size;
size_t max_entry_count;
};
struct sja1105_table {
const struct sja1105_table_ops *ops;
size_t entry_count;
void *entries;
};
struct sja1105_static_config {
u64 device_id;
struct sja1105_table tables[BLK_IDX_MAX];
};
extern struct sja1105_table_ops sja1105e_table_ops[BLK_IDX_MAX];
extern struct sja1105_table_ops sja1105t_table_ops[BLK_IDX_MAX];
extern struct sja1105_table_ops sja1105p_table_ops[BLK_IDX_MAX];
extern struct sja1105_table_ops sja1105q_table_ops[BLK_IDX_MAX];
extern struct sja1105_table_ops sja1105r_table_ops[BLK_IDX_MAX];
extern struct sja1105_table_ops sja1105s_table_ops[BLK_IDX_MAX];
size_t sja1105_table_header_packing(void *buf, void *hdr, enum packing_op op);
void
sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr);
size_t
sja1105_static_config_get_length(const struct sja1105_static_config *config);
typedef enum {
SJA1105_CONFIG_OK = 0,
SJA1105_MISSING_L2_POLICING_TABLE,
SJA1105_MISSING_L2_FORWARDING_TABLE,
SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE,
SJA1105_MISSING_GENERAL_PARAMS_TABLE,
SJA1105_MISSING_VLAN_TABLE,
SJA1105_MISSING_XMII_TABLE,
SJA1105_MISSING_MAC_TABLE,
SJA1105_OVERCOMMITTED_FRAME_MEMORY,
} sja1105_config_valid_t;
extern const char *sja1105_static_config_error_msg[];
sja1105_config_valid_t
sja1105_static_config_check_valid(const struct sja1105_static_config *config);
void
sja1105_static_config_pack(void *buf, struct sja1105_static_config *config);
int sja1105_static_config_init(struct sja1105_static_config *config,
const struct sja1105_table_ops *static_ops,
u64 device_id);
void sja1105_static_config_free(struct sja1105_static_config *config);
u32 sja1105_crc32(const void *buf, size_t len);
void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len);
void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len);
void sja1105_packing(void *buf, u64 *val, int start, int end,
size_t len, enum packing_op op);
#endif

19
include/linux/dsa/sja1105.h Normal file
View File

@ -0,0 +1,19 @@
/* SPDX-License-Identifier: GPL-2.0
* Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com>
*/
/* Included by drivers/net/dsa/sja1105/sja1105.h */
#ifndef _NET_DSA_SJA1105_H
#define _NET_DSA_SJA1105_H
/* The switch can only be convinced to stay in unmanaged mode and not trap any
* link-local traffic by actually telling it to filter frames sent at the
* 00:00:00:00:00:00 destination MAC.
*/
#define SJA1105_LINKLOCAL_FILTER_A 0x000000000000ull
#define SJA1105_LINKLOCAL_FILTER_A_MASK 0xFFFFFFFFFFFFull
#define SJA1105_LINKLOCAL_FILTER_B 0x000000000000ull
#define SJA1105_LINKLOCAL_FILTER_B_MASK 0xFFFFFFFFFFFFull
#endif /* _NET_DSA_SJA1105_H */